Hi there,
I'm trying to install one of the Dasaita PX5 headunits in my new QASHQAI and I've hit a snag. Two of the connectors on the wiring harness included with the unit are identical, but have very different wires coming out of them. I assume they are dependant in your cars factory setup, but since my unit didn't come with any sort of instructions I'm at a loss as to what they are.
My car has the small colour LCD from factory, with a factory rear camera (not the 360 camera) and front/rear parking sensors. Standard manual AC controls (not dual climate).
Any guidance would be appreciated!
I would assume that the "Low Plug" is for cars with low a equipment variant (as you can tell from the cables going into the connector already) and the other one is for cars with a more stuff.
So as of your cars description I would say go with the medium one and test it out.
Yep, I had a better look at the existing wiring loom today and the wires matched pretty well.
Decided to give it a try and it works brilliantly!
Factory rear camera and steering wheel controls all work, and I swear the audio quality using on board apps is better than the factory unit.
Hello, is it an android 8.0 unit ? If yes, does bluetooth works ?
This unit runs Android 6.0. There are 8.0 upgrade guides floating around but I honestly haven’t had the time or inclination to try it, the unit is working really well as is.
Bluetooth phone calls work great.
Bluetooth audio streaming works but I’ve used it maybe once briefly (I do all music and streaming directly on the headunit) so I cant really comment on how well audio works.
Ok thanks, I'm considering byuing a dasaita but I heard bluetooth doesn't work with android 8.0 units !
M4nu83 said:
Ok thanks, I'm considering byuing a dasaita but I heard bluetooth doesn't work with android 8.0 units !
Click to expand...
Click to collapse
Hi, I have Android 8 unit since 4 months and bluetooth works fine. I use bluetooth for phone calls, for audio I use Spotify from unit app.
mitchello said:
Yep, I had a better look at the existing wiring loom today and the wires matched pretty well.
Decided to give it a try and it works brilliantly!
Factory rear camera and steering wheel controls all work, and I swear the audio quality using on board apps is better than the factory unit.
Click to expand...
Click to collapse
hi mitchello,
I have the same car radio model, I have a question about the cable connection for the rear camera, I have a yellow cable from the power cable called cvbs, and two yellow cables on the camera aux cable, one says Aux Video In and the other Cam VIN, to which should I connect the Cvbs cable?
?
rafiuxdoo said:
hi mitchello,
I have the same car radio model, I have a question about the cable connection for the rear camera, I have a yellow cable from the power cable called cvbs, and two yellow cables on the camera aux cable, one says Aux Video In and the other Cam VIN, to which should I connect the Cvbs cable?
?
Click to expand...
Click to collapse
I have exatly the same problem, with my unit : 2 yellow cables but the factory reverse camera don't start !
krysthof972 said:
I have exatly the same problem, with my unit : 2 yellow cables but the factory reverse camera don't start !
Click to expand...
Click to collapse
Hello, What Is u Nissan vehicle model?
I have a Nissan Qashqai 2018, support Dasaita says the connect cam vin whit Cvbs. I have not done the test yet.
krysthof972 said:
I have exatly the same problem, with my unit : 2 yellow cables but the factory reverse camera don't start !
Click to expand...
Click to collapse
Have you connected the reverse trigger wire? I *think* its pink in color.. or blue. You'll probably have to splice it. This trigger is connected to your reverse gear, so that when you are in reverse, the screen will switch to camera.
rafiuxdoo said:
hi mitchello,
I have the same car radio model, I have a question about the cable connection for the rear camera, I have a yellow cable from the power cable called cvbs, and two yellow cables on the camera aux cable, one says Aux Video In and the other Cam VIN, to which should I connect the Cvbs cable?
?
Click to expand...
Click to collapse
Hey mate, I'd have to pull out my unit to check, but I'd expect you connect it to the CAM IN connector. The White/Red RCAs should be for the AUX input in the armrest, and the yellow RCA for the camera.
I assume you have a factory camera yes? With it all connected my factory camera automatically flicks on when in reverse (even if the unit is still booting).
rafiuxdoo said:
Hello, What Is u Nissan vehicle model?
I have a Nissan Qashqai 2018, support Dasaita says the connect cam vin whit Cvbs. I have not done the test yet.
Click to expand...
Click to collapse
thank you for the answer, CVBS don't work
it's 2015 Qashqai
I'm really drawn to this head unit for my 2017 Rogue SL AWD. My current non-Android Auto/Car play unit is basically just a bluetooth steamer. The built-in maps are so slow, outdated, cumbersome and without helpful traffic info that I simply use Google maps. This new unit looks sharp and allows full functionality without paying Nissan that crazy monthly fee.
I'm in 100% if I can more or less just do a swap out.
---------- Post added at 10:29 PM ---------- Previous post was at 10:23 PM ----------
Amazon has one listed with the PX6 CPU, so maybe slightly updated... "Dasaita 10.2" Android 9.0 Bluetooth Car Stereo Head Unit with 4G RAM / 64G ROM for Nissan X-Trail Qashqai Rogue 2014 2015 2016 2017 Car Radio Touch Screen GPS Navigation Support USB Bose AMP" at 499.
emtownsend said:
I'm really drawn to this head unit for my 2017 Rogue SL AWD. My current non-Android Auto/Car play unit is basically just a bluetooth steamer. The built-in maps are so slow, outdated, cumbersome and without helpful traffic info that I simply use Google maps. This new unit looks sharp and allows full functionality without paying Nissan that crazy monthly fee.
I'm in 100% if I can more or less just do a swap out.
---------- Post added at 10:29 PM ---------- Previous post was at 10:23 PM ----------
Amazon has one listed with the PX6 CPU, so maybe slightly updated... "Dasaita 10.2" Android 9.0 Bluetooth Car Stereo Head Unit with 4G RAM / 64G ROM for Nissan X-Trail Qashqai Rogue 2014 2015 2016 2017 Car Radio Touch Screen GPS Navigation Support USB Bose AMP" at 499.
Click to expand...
Click to collapse
Be prepared to be underwhelmed , over promised and under delivered.
marchnz said:
Be prepared to be underwhelmed , over promised and under delivered.
Click to expand...
Click to collapse
I bought mine from Ali Express ( Dasaita 10.2 - PX6 Android 9 ) and shipped to Australia in 5 days, I couldn't be more happier with the head unit.
All the Qashqai functions operate including the 360 all round camera, TPMS, Android auto and Carplay.
Hello All
I have dasaita px6 installed on my Qashqai as well
I want to know external MIC location best place as the built-in MIC was good initially then it became poor
Installed external MIC under the steering wheel but still voice is far
Hi all, i have Nissan Qashqai 2018 and i just few days ago i got my Dasaita PX5. Everything looks fine and work very well, but I am little bit concerned about noise which is coming out from device. Every time when I accelerate I am getting some kind of whistling noise coming out from device. Noise sometimes disappears but than come back again and started to be very noise. I tested and its coming from screen device, only disappears when I unplug the big black plug (which I think it is a main electrical socket or power supply because without that is not working). Do you guys have any similar issues before? Do you have any suggestions how to fix same one?
Second question is regarding to the SWC option. I connected everything how they did suggest but still is not working. I did choose proper settings on display and still nothing changed. I tried to contact support but until today no answer.
All help is more than welcome
sandpita said:
I bought mine from Ali Express ( Dasaita 10.2 - PX6 Android 9 ) and shipped to Australia in 5 days, I couldn't be more happier with the head unit.
All the Qashqai functions operate including the 360 all round camera, TPMS, Android auto and Carplay.
Click to expand...
Click to collapse
Do you have any pics you wouldn't mind sharing? Also, this is several months later, so... how do you still like it?
Thanks!
emtownsend said:
Do you have any pics you wouldn't mind sharing? Also, this is several months later, so... how do you still like it?
Thanks!
Click to expand...
Click to collapse
Had the HU for over a year now and it's faultless,everything just works i.e Factory Park Assist, 360 all round camera, GPS,DAB+.
Also I have the Carlinkit Carplay USB dongle which for me works every time with no issues where others have issues with inbuilt Carplay HU using ZLink.
Hello,
I purchased a used Seicane unit that has no volume out of speaker wires. I bench tested this and also tested in the vehicle trying many different MCU's and ROM's and no luck. Sound is playing just find out of the RCA jacks to an amplifier. I have since upgraded the unit from a PX3 to a PX5 with Android 9 from Witson. Unfortunately, I updated the MCU to 3.14 before I read that you cannot go backwards to the 2.# series. I was wondering if there maybe a setting I can change that would affect this? TIA
Send it back! What did the reseller suggest when contacted for support?
Have the same problem, but I have builded in amp for rear speakers in my car. So at least have some sound, will buy external amp anyway. Px6 android9
I have a Dasaita PX6 head unit in my 2017 WRX, and the mic is picking up a ton of background noise, from what people on the other line tell me. I tried several mic apps and a 3.5mm wired mic but it still doesn't change the quality. I had this issue in my other aftermarket AA/CP head unit in my VW and assumed it was just because it was non-OEM. But after I did some research, I saw that people said that they had no issues with their mics in the PX6 series... Can someone give me any advice or directions?
Model - PX6 (1024x600)
Android Version - 10
Kernel Version - 4.19.111+
MCU - MTCE_HA_V3.78_1
Not Android Auto. Requested Moderator move to (MTCD) forum as MCU is MTCE.
EatMyShorts41 said:
I have a Dasaita PX6 head unit in my 2017 WRX, and the mic is picking up a ton of background noise, from what people on the other line tell me. I tried several mic apps and a 3.5mm wired mic but it still doesn't change the quality. I had this issue in my other aftermarket AA/CP head unit in my VW and assumed it was just because it was non-OEM. But after I did some research, I saw that people said that they had no issues with their mics in the PX6 series... Can someone give me any advice or directions?
Model - PX6 (1024x600)
Android Version - 10
Kernel Version - 4.19.111+
MCU - MTCE_HA_V3.78_1
Click to expand...
Click to collapse
I do have Xtrons PQS81UNV unit (PX6, Android 11, MTCH_GS_V3.80_3) and I bought external mic for it. I do not see any improvement when I connect external mic, so I do not use it at all. Internal unit mic is so good that I just wasted money on external 3.5mm mic.
I've tried using the internal mic on the face of the headunit, but it still sounds terrible...
L
EatMyShorts41 said:
I've tried using the internal mic on the face of the headunit, but it still sounds terrible...
Click to expand...
Click to collapse
As per hundreds of posts on this, disconnect internal.
Hello, I purchased an Xtrons PQS1139BL and it's been a toxic relationship. I love the features but its very buggy. Xtrons says there are no updates for this unit and I think they are tired of dealing with me.
This is my bug list.
Every electrical noise came out the speakers such as alternator whine, the idle are control valve on the engine, turning the headlighs on and off causes a pop. The solution so far has been Xtrons sent me a filter that removed 75% of the noise but my wife still could not stand riding in the car so I gutted the factory BMW DSP and added my own 4CH amp the is ran off of the RCA cables and that resolved 99% of the noise. But this unit only has front RCA out so now I lost fader control.
Unit lockups about 1 to 2 minutes after starting the car the UI will freeze and what is on the screen will stay but the steering wheel controls will still continue to beep when pressed eventually the screen will turn black and the steering wheel controls will stop beeping then sometimes the unit will reboot and come back and other times I need to restart the car at a red light or pull over and restart. My wife pointed out that it mostly happens after I reverse which lead me to this forum and as an experiment I cut the reverse input to the headunit and now the lockups after starting the car went from 50% to 5% but now I lost my backup camera. One thing to add is that once the unit is up and running it works fine so I don't think it's a heat issue.
Wireless carplay, the unit came with an app called multiplay and half of the time it would say "MFI chip not found". So Xtron's sent me USB adapter that uses an app called autokit and that works okay but my phone shows that it's charging but it's actually loosing a charge so I bought a USB Y adapter to add power from a cigarette lighter plug.
The versions that my unit shows is
Model PX6
Android 10
Build number rk3399-userdebug 10 qq2a.200305.004.a1 eng.hct2.20210630.152440 test-keys
Kernel version 4.19.111+
#131 Thurs Jun 24 2021
MCU version MTCH_GS_V3.78_3
May 31 2021
Is there any hope for this? Can i update it? Can I wipe and reload it? Can I pull logs off of this? I'm about over it.
This is the unit
10.25" Screen Android 11 6-Core 4+64GB Car Radio GPS For BMW E39 E38 740i 750i | eBay
Find many great new & used options and get the best deals for 10.25" Screen Android 11 6-Core 4+64GB Car Radio GPS For BMW E39 E38 740i 750i at the best online prices at eBay! Free shipping for many products!
www.ebay.com
This is the carplay adapter
Auto Car Navigation Car Auto Play Module IOS & Android Phone USB Dongle Adapter | eBay
Find many great new & used options and get the best deals for Auto Car Navigation Car Auto Play Module IOS & Android Phone USB Dongle Adapter at the best online prices at eBay! Free shipping for many products!
www.ebay.com
Thanks for reading this.
Jeremy
Hey did you found any solution for this problem?
p.a.i.n.k.i.l.l.e.r said:
Hey did you found any solution for this problem?
Click to expand...
Click to collapse
I resolved the noise issue with an aftermarket amp and the locking up i patched it with a switch in the glove box to reboot the headunit manually. That's the wifes job. This xtrons unit is complete junk.
Jeremy.flaugh said:
I resolved the noise issue with an aftermarket amp and the locking up i patched it with a switch in the glove box to reboot the headunit manually. That's the wifes job. This xtrons unit is complete junk.
Click to expand...
Click to collapse
Xtrons, complete junk. Yep - fake Chinese origin brands that sell from various factories at their best margins (buy cheap, sell expensive)
Jeremy.flaugh said:
I resolved the noise issue with an aftermarket amp and the locking up i patched it with a switch in the glove box to reboot the headunit manually. That's the wifes job. This xtrons unit is complete junk.
Click to expand...
Click to collapse
I have xtrons original software if you need let me know
p.a.i.n.k.i.l.l.e.r said:
I have xtrons original software if you need let me know
Click to expand...
Click to collapse
Yeah what do you have? Does it resolve the lockup issues?