So I just took out my sensation from the box and noticed the stock screen protector was off set and already peeling back a great amount on the top corner. I looked closely and noticed that the small tab at the top of the screen protector is actually inside the ridge of the phone, in that small thin crack where the front-screen ends. That was what cause the screen protector to not lay flat and started bending inward. I slowly peeled the protector back and when it came to the part that was "stuck" or jammed into the crack it took a good tug (I guess it was the adhesive...or it was really in there) for it to pop out. This couldn't have done any damage right? The small crack leads to nothing does it?
Probably just means it got caught in the gap when being fitted. I assume when you say 'crack' you mean the gap where the screen meets the rest of the body of the phone?
Yeah, where the black part ends.
Also, I have removed it and replaced it on more accurately since then and noticed it sticks to the screen very well, even attaching itself to parts that I have not even smoothed my fingers over yet, must be the static? Are there any disadvantages in using this as opposed to buying a new screen protector?
If it works then continue using it. We don't get them pre-fitted in the UK so I bought a 3rd party one
edit: delete this thread please mod thank you
Hi
I dropped my phone getting out of my car, wounded. I look at the phone hoping the screen wasn't broke, it wasn't thank god. The back class was broke but instantly thought well its a cheap fix and i am buying a durable case.
However, imagine place the phone (screen side down) then look at the bottom corner, not directly underneath but the opposite corner, this was the crumple zone. The corner casing has also bent a little bit upwards and it now has a sharp edge?
Would anyone know how i could get this part or better still name the part so i can do a better search?
thanks
Hi Guys,
I have a Samsung Galaxy S7 Edge Gold which I purchased while I was traveling from the Uae.
The phone had an issue with the home button and I had to eventually send it back to get it repaired.
The service center in the UAE replaced the entire screen and front panel of the phone and now everything works fine.
But i noticed the other day that there is a gap in the screen and metal frame of the phone on the left side.
And through this gap i can see the connector of the volume button.
The gap is larger on the left side and very minimum on the right side.
Through this gap light leaks and its very annoying.
I can easily slide a piece of paper through the gap but I cannot slide a thick business card.
I am extremely concerned about two things:
1) Water getting in through the gaps
2)The light leaking making my screen and device faulty.
I can see the light leak during the day when the screen is maxed at brightness although it is more visible in a darker environment and also the LED notification light bleeds just a bit from the top gap between the screen and frame.
I was wondering if this was normal?
I pray to god that it is as my warranty expires in 2months and I have no one to send my phone back with or otherwise I need to spend 300$ for a repair.
I have attached pictures... Do let me know what you think.
Thanks
salvator101 said:
Hi Guys,
I have a Samsung Galaxy S7 Edge Gold which I purchased while I was traveling from the Uae.
The phone had an issue with the home button and I had to eventually send it back to get it repaired.
The service center in the UAE replaced the entire screen and front panel of the phone and now everything works fine.
But i noticed the other day that there is a gap in the screen and metal frame of the phone on the left side.
And through this gap i can see the connector of the volume button.
The gap is larger on the left side and very minimum on the right side.
Through this gap light leaks and its very annoying.
I can easily slide a piece of paper through the gap but I cannot slide a thick business card.
I am extremely concerned about two things:
1) Water getting in through the gaps
2)The light leaking making my screen and device faulty.
I can see the light leak during the day when the screen is maxed at brightness although it is more visible in a darker environment and also the LED notification light bleeds just a bit from the top gap between the screen and frame.
I was wondering if this was normal?
I pray to god that it is as my warranty expires in 2months and I have no one to send my phone back with or otherwise I need to spend 300$ for a repair.
I have attached pictures... Do let me know what you think.
Thanks
Click to expand...
Click to collapse
Water resistance is definitely gone, so don't get it wet. I did the exact same thing with an old iPhone I had and when they sent it back that hadn't fitted the screen in properly. Do you have a local shop, you could ask them to pop it back in for you?
Light leaking through edge will not damage your screen. If you mean moisture fettering inside your phone his could become an issue over time, depending on the environment you expose it to.
You can buy screen replacement tool kits (no actual screen) on ebay for a few dollars, you could do it yourself if your warranty is not valid in new country, it's probably just some component (seal probably) not properly seated that is stopping the case closing properly
Hi guys and gals, so I have determined the cause and solution in some cases of pink screen line.
NOTE: I TAKE NO RESPONSIBILITY FOR FURTHER DAMAGE YOU CAUSE BY TRYING THIS! THIS IS MEANT AS A LAST RESORT BEFORE REPLACING THE ENTIRE SCREEN/DIGITIZER!
Problem :
Problem is with the flex ribbon cable that attaches to the screen. I had the pink line and had smashed my screen, so I ordered a new one and replaced it.
Cause:
The high heat of our device melts the glue that attaches the ribbon. I learned that because after speed testing kernels on the device with the new screen, the line eventually reappeared.
Solution:
Heat can also fix the problem, if it hasn't gotten too bad. If you can find the pressure or position where the pink line goes away, use a heat gun or hair dryer to warm the area at the top right of the screen, usually at the selfie camera. Heat from above so you're heating the screen and the top of the device. Once it's hot, but not too hot (yes frustrating but only do this as a last resort before buying a replacement screen), then allow to cool naturally back to room temp. If the line was absent the whole time heating and cooling, there's a chance you've fixed it.
DANGEROUS LAST RESORT:
THIS IS 90% CERTAIN TO CRACK YOUR SCREEN! Now, if this didn't work, and you're Very adventurous, you can search Google for s7 edge ifixit, and see how you can CAREFULLY heat the glue around the whole screen. Don't remove the screen, as it WILL break! But perhaps you can get a pick or card into the top just enough to see the flex ribbon, use same pick or card to lightly press the ribbon as you heat and cool as per above instructions.
It would've been awesome if there was a video tutorial.
Someone tested it ? Some video tutorial could be really helpfully to repair this. What temperature should i go ? I think the best option will be to use a hot air soldering station but i need more info.
Best regards RufleX
RufleX said:
Someone tested it ? Some video tutorial could be really helpfully to repair this. What temperature should i go ? I think the best option will be to use a hot air soldering station but i need more info.
Best regards RufleX
Click to expand...
Click to collapse
Hello.
I work allot with prints directly. Scripting flashing repairing and debug in field. So I can asure you on a fact this will work.
The only part I'm questioning is the fact if they did use glue for a flat cable. Since logic wise for differemt prints ypu use a lock way cheaper and easier to replace parts.
If they dis use glue this fix will only be a temporary one. Since the glue will spread more and more. Each time you will do it this way.
So like I said. What the best man said is true. It will work. Only if it is glue. It might be possible it will only work for like 3 months or so. Depends on the ammount of glue and connector type they use. Can't say anything about that part. Only reason I reply because no one else did since u asked this question.
Yesterday was a really hot day (well for England) and part way through, I noticed a very thin pink line appear. The phone was hot but not entirely my fault.
Anyway, it disappeared a few minutes later and hasn't returned. Slightly worrying though.
Back today. Pressing hard on the top right actually makes it thicker. Gone again as I type this message.
Is it covered by warranty?
davecotefilm said:
Hi guys and gals, so I have determined the cause and solution in some cases of pink screen line.
NOTE: I TAKE NO RESPONSIBILITY FOR FURTHER DAMAGE YOU CAUSE BY TRYING THIS! THIS IS MEANT AS A LAST RESORT BEFORE REPLACING THE ENTIRE SCREEN/DIGITIZER!
Problem :
Problem is with the flex ribbon cable that attaches to the screen. I had the pink line and had smashed my screen, so I ordered a new one and replaced it.
Cause:
The high heat of our device melts the glue that attaches the ribbon. I learned that because after speed testing kernels on the device with the new screen, the line eventually reappeared.
Solution:
Heat can also fix the problem, if it hasn't gotten too bad. If you can find the pressure or position where the pink line goes away, use a heat gun or hair dryer to warm the area at the top right of the screen, usually at the selfie camera. Heat from above so you're heating the screen and the top of the device. Once it's hot, but not too hot (yes frustrating but only do this as a last resort before buying a replacement screen), then allow to cool naturally back to room temp. If the line was absent the whole time heating and cooling, there's a chance you've fixed it.
DANGEROUS LAST RESORT:
THIS IS 90% CERTAIN TO CRACK YOUR SCREEN! Now, if this didn't work, and you're Very adventurous, you can search Google for s7 edge ifixit, and see how you can CAREFULLY heat the glue around the whole screen. Don't remove the screen, as it WILL break! But perhaps you can get a pick or card into the top just enough to see the flex ribbon, use same pick or card to lightly press the ribbon as you heat and cool as per above instructions.
Click to expand...
Click to collapse
Ill go with the first guys suggestion. As i ve done this before with many electrical products. I will not go sticking objects into my waterproof phone.
Did anyone try to open in via the back and push something in to hold the connector like in this s6 edge video ?
https://www.youtube.com/watch?v=Ed2VvM7uEIE
there is a whole group on this problem
see fb group
https://www.facebook.com/groups/1898027130464533/
I had this issue repaired under warranty. What surprised me from the beginning of owning this phone was just how hot it would get when the screen was on, firmware updates and so on. Sometimes almost too hot to touch. Since the repair it only ever gets mildly warm. I didn't get a repair sheet when the phone came back but I wonder if it was just the screen that was replaced or whether the screens have been redesigned?
Has anyone tried the last resort?
Nothings helped I brought it back to shop where i bought it . my device has 2 years warrenty . I get a new device.
it is not because of heat, i used mine for 2 years, during the summer (40c) with heavy use, and i have no pink line. it's just a manufacturing defect.
I picked up a used s7 edge with a cracked back glass. It is now showing this pink line issue. I started to notice it after it had been in my front pocket. I know it did not get hot in there ( sure would have noticed it there ), but it was definitely put under pressure when I would sit. Most of the time the line would go away by turning the screen on and off a few times and would stay gone until I carried it in my pocket again. The other day it came up and would not go away. I finally downloaded LCD-Test and swiped through the RGB screens a couple times and it went away and hasn't returned. On doing some experimentation I found that by pressing near the front camera I could create the issue but it would go away when removing the pressure. Confirming that it is indeed a physical issue that seems to latch on if pressure is applied for enough time. I have a new back glass coming and am wondering if the heat I will apply in removing the glass will help with this issue. " Will post result when completed " I am also looking in to a case that will take the stress off the top corner of the phone when it is in my pocket. Any Ideas ?
Pink Line Issue
Hi everyone, I have a question about pink like issue on S7 edge.
I've been living with the pink line since early this year, recently the line is getting too thick I couldn't bear with it anymore, so I decided to get it changed.
The question is, I've read threads that says the pink line appears are because of design flaw. So if I replaced the screen (which costs a bomb) will that appear again after a year of use?
Side note, my pink link appears about a year after I bought this.
Any owner who suffer also from pink line issue, are you still facing same issue after screen is replaced?
Thanks for your time.
Carlos
Here's a new observance of the pink line issue. After a day with no problems hanging around the house. Yesterday morning I went out into below freezing temps. Pink line came up almost immediately. ( Something in top of phone changing due to temp ? ) Upon getting home got it to reset and left it inside the rest of yesterday and all of today. ( No pink line ) interesting.
redbandman said:
Here's a new observance of the pink line issue. After a day with no problems hanging around the house. Yesterday morning I went out into below freezing temps. Pink line came up almost immediately. ( Something in top of phone changing due to temp ? ) Upon getting home got it to reset and left it inside the rest of yesterday and all of today. ( No pink line ) interesting.
Click to expand...
Click to collapse
How old is your phone please just out of interest?
crash_194 said:
How old is your phone please just out of interest?
Click to expand...
Click to collapse
Bought it used, but it appears to be about 6months
---------- Post added 12th December 2017 at 12:00 AM ---------- Previous post was 11th December 2017 at 11:58 PM ----------
Once again today, have stayed inside and no pink line.
1. Try the flashing colour solutions
2. Try some pressure at Samsung logo
3. Try to get warranty fix by Samsung if your phone isn't damaged
4. Here is a video on how I permanently fixed mine :good:
youtube.com/watch?v=dacCTRU6snY
Thank you man, I replaced the screen and after a fex months the line appeared, it dissapeared whan I pressed or lifted the screen a bit so, for me, was easy to lift it a it than heating and glueing because that part off the screen didnt have glue.
Tnx for your post I fixed the line.
Hello,
Received my Note10+ yesterday, so far love the device.
I just noticed today (this morning) on bright sun / light a gap of couple of millimeters on top of the screen.
Looks like screen is not going to the edge on top side only, is this normal?
Image / full size:
https://screens.urimage.link/20190830_074945.jpg
Please see image for better view / understanding.
Thanks
that gap is for the sensors and speaker
Thank you very much for your time and responding to this thread.
I am a little bit confused, isnt the speaker at the bottom?
I had Samsung S10+ until yesterday, and i do not remember seeing gap like this (its not the same phone, but, probably similar design / i might be wrong though).
Thank you
The gap in the middle 2 arrows are the cut out for the front speaker the other gaps are where the screen meets the frame sometime there bigger on different phones its hut and miss
But if it bothers you exchange it for one that fits a bit better
Thank you very much for responding.
I think i have 15 days to replace / return the phone (i will re-check), but, if its kinda normal, and possible on any other phone, even replacement, i do not think its wise to do it.
Once i put case on, i do not even think it will be that visible (hardly visible now as well if not on bright light).
Biggest concern if this would affect IP68 in anyway
Thanks
s-f-r-j said:
Thank you very much for responding.
I think i have 15 days to replace / return the phone (i will re-check), but, if its kinda normal, and possible on any other phone, even replacement, i do not think its wise to do it.
Once i put case on, i do not even think it will be that visible (hardly visible now as well if not on bright light).
Biggest concern if this would affect IP68 in anyway
Thanks
Click to expand...
Click to collapse
I think there is a way you can test the ip rating without obviously putting it in water
Back when I had the xperia phones you could squeeze the device and check the pressure didn't rise and stay risen to indicate its water tight
Thank you again for your time.
I decided to test that gap by pouring water on it for about 20-30 seconds, no issues at all.
I will not bother with this, will just enjoy the phone.
Thanks again.
The picture link is not working. From my understanding the only small gap should be in the center where the top speaker hole is. But the left and right side of the top speaker till the corner should not have any gap. I am having the same issue. I'm going to check to see if other models are like that.
Same, should not be there.
In the end i decided to return the phone.
Upon closer inspections took some photos and judging by other demo units on display. They all have that white line gap. Some are more noticable than others. But same line can be seen. I compared 3 different phones from different stores. They all exist. It's seems like that white line looks like maybe it's the adhesive glue. The middle does not have it where the ear speaker cutout is, where the ear speaker hole ends on both side left and right white line is visible because of the extra gap on both sides and it appears that the line stops before the corner on each side of the glass on the top. It's maybe nitpicking buts it's really annoying. I checked on the S10 it's not present on that model and none I see on the Note 9 too. I checked. And since it's like white color can be visible inside the small gap line on the top where the glass meets up with the metal frame.
I actually just discovered that I can get a piece of paper down between the top of the screen and the frame on my Note 10 +!!!??? All along the top of the glass - from the top left corner to the right?
Is this what you are talking about? And will the phone still be waterproof? (There could still be a rubber membrane that prevents water from entering the insides of the phone...)