Related
Figures they'd come out with it a week before I'm thinking of picking up an Imate Ultimate 8150. But it's out for those of you interested link below.
P3600 Full Body Invisible Shield
http://www.shieldzone.com/item_description/HTCP3600I.html
Nice!! It's listed for the P3600i, but I guess it's exactly the same as the P3600.
Anybody tried it already?? Better than a regular silicon cover?
How does this work?
If it is stretched all over the PDA, how is it joined/sealed? What about removing the batter cover or using the thumb wheel? Is it fixed like cling-film?
Also, the screen is recessed from the surround so if it is stretched around the housing and screen, then there would seem to be a gap between the screen and this cover, so what will the sensitivity of the screen be like?
PaulusUK said:
How does this work?
If it is stretched all over the PDA, how is it joined/sealed? What about removing the batter cover or using the thumb wheel? Is it fixed like cling-film?
Also, the screen is recessed from the surround so if it is stretched around the housing and screen, then there would seem to be a gap between the screen and this cover, so what will the sensitivity of the screen be like?
Click to expand...
Click to collapse
If you followed the link and watched the installation video showing it being applied to an ipod you wouldn't have asked.........suggest you try that first.
Andych said:
If you followed the link and watched the installation video showing it being applied to an ipod you wouldn't have asked.........suggest you try that first.
Click to expand...
Click to collapse
looks like it would be a least 3 pieces - one for the screen, then one for the keys, and one for the back - which does not protect the sides. And the video doesn't show how it fits on the phone, it shows how it fits on the front of a ipod - so don't be a smart a*s. He was asking how it fits on this phone not an ipod dumb a*s.
earl00 said:
looks like it would be a least 3 pieces - one for the screen, then one for the keys, and one for the back - which does not protect the sides. And the video doesn't show how it fits on the phone, it shows how it fits on the front of a ipod - so don't be a smart a*s. He was asking how it fits on this phone not an ipod dumb a*s.
Click to expand...
Click to collapse
Get life....yes the clip shows it being fitted to an ipod......if you gothered to watch the clip you would have seen that the piece for the back also does the sides as they wrap around.....apart from the size etc the actual method of applying this will be the same.
Next time smart a*s do your homework rather than mouthing off.
Oh yes all my questions answered if only I had watched the ipod video.
Now All I need is an m700 that is exactly the same shape as an ipod, with all the buttons in the same place, with a flush screen, and well, all very ipodish, and then it will all be clear.
So this will be no more than a screen protector on the PDA. It will not protect the buttons or lower raised section of the housing. Also won't protect the sides (too many buttons), and it seems that the tight curves will be a problem for this cover. I can see this peeling off the m700 in a very short time
If you know so much about it, then can you explain how it will work with a recessed screen? Will I be able to tap it all over with a key and not damage the phone, and if I throw it in a box of coins, will all the phone be safe from scratches and chips - just like the ipod?
PaulusUK said:
Oh yes all my questions answered if only I had watched the ipod video.
Now All I need is an m700 that is exactly the same shape as an ipod, with all the buttons in the same place, with a flush screen, and well, all very ipodish, and then it will all be clear.
So this will be no more than a screen protector on the PDA. It will not protect the buttons or lower raised section of the housing. Also won't protect the sides (too many buttons), and it seems that the tight curves will be a problem for this cover. I can see this peeling off the m700 in a very short time
If you know so much about it, then can you explain how it will work with a recessed screen? Will I be able to tap it all over with a key and not damage the phone, and if I throw it in a box of coins, will all the phone be safe from scratches and chips - just like the ipod?
Click to expand...
Click to collapse
Lets get this straight....I haven't used this product...however when I saw the "link" I went to the manufacturers site to get a better understanding of it....
I watched the video and while it was of it being fitted to an ipod I got a basic understanding of how it could be fitted to a P3600i.
I didn't think it was "cling wrap", I understood that there would be several sections involved....including one for the recessed screen (yes, just like a normal screen protector) and I too would be skeptical of it protecting all parts of the phone.
There is a tendency in these forums for people to not search out information but to ask seemingly dumb questions.....
As this product is new for this model....why not just ask if anyone has tried it or ask the manufacturer for more information.....or is that too hard to do????
NOT FULL BODY...JUST SCREEN ONLY
The site says full body not Screen only, that's a separate option...
I would really like to know if and how exactly this works on 3600.
I actually have silicon case and screen protector for mine, but this would make it considerably smaller...
Bought and use the InvisibleShield
Folks,
I bought it and had it send to Holland. Took about 1 to 2 weeks but ok I am not in a hurry.
The full body covers basically all the shiny black plastic plus the screen. The rest (middles of the sides and the front keys) are not covered. Also offcourse the camera, speakers etc are not covered. However, and this is probably the difference between P3600 and P3600i the front camara is covered by the shield blurring the image. Now I have already put it on the camera but the next time I would use a hole puncher to add the extra hole. I probably will use a sharp hobby knife to cut an extra hole (on the other hand I never use video conferencing).
The plastic is more stronger and thicker then normal screen protectors. Haven't tried to scratch it on pupose and guess what I am not going to do it. If a scratch forms by accident I will mention it here.
The screen takes some getting used to with the new cover. The plastic does not "slide" as easy as the original screen protector or the screen itself. Maybe this is just in the first period.
The application process it pretty easy if you just take the time. Takes about 30 minutes if you do it slowly. Only 2 minor bubbles on the back but those are not really an issue, the rest is perfect.
Hey for 20 euro's I think it is a good deal. No horrible rubber case or GPS blocking metal case for me anymore. Only downside is that if the phone is dropped now there is no protection. This is only against scratches.
Lifetime guarantee so lets see how often I have to send it back.
All in all recommended so far (but that is just after 1 day of use)
I want to see it
Post a picture please
Isn't it invisible?..
See the invisible sheet
Well actually it is quit difficult to see but here are some picures. The picture from the side shows you some edges.
Edges
The edges that you can see in the pic don't seem to line up perfectly, how were the dimensions on the rest of the edges?
i've been thinkin of getting one of these since i saw them for ipods but that messy edge is scaring me away a little, also how are you finding the screen protector after a little more use?
Edges reply
Well the edges are more because of my talent I think. The reason why I showed you this is because at least you can see something. For the rest it alligns perfectly.
After using it for a while it still seems a great product. I accidentaly dropped the thing but no scratch at all. What you do notice is the slightly more pressure you need when using the stylo. Also the screen protector is not as smooth as the original screen making the sliding a little more difficult. Also the plastic sticks to your ear while calling. But all in all still recommended.
I just put it onto the white one...
...and it is invisible. You can see it only on buttons' silver surrounding, on white parts only the edges are visible if you try really hard. I haven't got a good enough camera to show it, sorry.
It has a sticky feeling about it (maybe needs to dry more?). I don't like it on the screen - feels sticky and thick. I'd say use a decent screen protector instead.
It came WITH the cut-out for a camera (it's 3600i shield, I've got 3600), so it fits like a glove.
Oh, it's not a stress-free, low pressure 15 minutes application like they advertise it. It's fekkin pain in the ar$e one hour job, you're swetting your ar$e off. And - I guess - you can never get it perfect at the end. There will always be a bubble or misaligned edge somewhere (or is it me?).
Long term use review to follow.
sabestian said:
...and it is invisible. You can see it only on buttons' silver surrounding, on white parts only the edges are visible if you try really hard. I haven't got a good enough camera to show it, sorry.
It has a sticky feeling about it (maybe needs to dry more?). I don't like it on the screen - feels sticky and thick. I'd say use a decent screen protector instead.
It came WITH the cut-out for a camera (it's 3600i shield, I've got 3600), so it fits like a glove.
Oh, it's not a stress-free, low pressure 15 minutes application like they advertise it. It's fekkin pain in the ar$e one hour job, you're swetting your ar$e off. And - I guess - you can never get it perfect at the end. There will always be a bubble or misaligned edge somewhere (or is it me?).
Long term use review to follow.
Click to expand...
Click to collapse
Any update to report? I'm thinking about buying one and would like your oppinion since you've now had it for a while.
Dimitri- said:
Folks,
I bought it and had it send to Holland. Took about 1 to 2 weeks but ok I am not in a hurry.
The full body covers basically all the shiny black plastic plus the screen. The rest (middles of the sides and the front keys) are not covered. Also offcourse the camera, speakers etc are not covered. However, and this is probably the difference between P3600 and P3600i the front camara is covered by the shield blurring the image. Now I have already put it on the camera but the next time I would use a hole puncher to add the extra hole. I probably will use a sharp hobby knife to cut an extra hole (on the other hand I never use video conferencing).
The plastic is more stronger and thicker then normal screen protectors. Haven't tried to scratch it on pupose and guess what I am not going to do it. If a scratch forms by accident I will mention it here.
The screen takes some getting used to with the new cover. The plastic does not "slide" as easy as the original screen protector or the screen itself. Maybe this is just in the first period.
The application process it pretty easy if you just take the time. Takes about 30 minutes if you do it slowly. Only 2 minor bubbles on the back but those are not really an issue, the rest is perfect.
Hey for 20 euro's I think it is a good deal. No horrible rubber case or GPS blocking metal case for me anymore. Only downside is that if the phone is dropped now there is no protection. This is only against scratches.
Lifetime guarantee so lets see how often I have to send it back.
All in all recommended so far (but that is just after 1 day of use)
Click to expand...
Click to collapse
Same question for you... Any updates? Thank you...
Definately recommended
After using it a few months I still think it is definately worth the few euro's. Ok it sticks a bit when calling for a long time and I think I even managed to get a small scratch on it but I sort of abuse the fact that I have the shield. Store it with keys, never use a case etc.
No I have bought some useless accessoires such as aluminium case (blocks GPS) and the remote for mediaplayer but the shield I would really recommend.
Cheers,
Dimitri.
Ok, i've had a problem with it, first i removed the protector that was as large as the device and made the screen very ugly, then i got the one from the box and putted it on, every air-bulb was gone when i kept rubbing etc.
1 stayed, under that bulb there was something white, i found out it was a 'piece' of dust.
It was kind of annoying so i removed the screen-protector, now when im trying to put it on i get lots of 'dust-bubbles',
Anyone has an idea of how to do it or should i just leave my diamond without the screen protector?
Protection
Personally i prefer to have a screenprotecter on my device. I can recommend invisible shield. its very durable and will not be scratched. check it out on www.zagg.com
If you remove the protector, then there will alway be dust next time, because the dust get stuck to the protector glue. (I have also remove mine several times)
I have tried zagg, but I can't recommend it. It is a little sticky (which they also says on their homepage) and I don't like that. The floating feeling is gone. It is also not that invisible.
I have selected to buy a new original protector, and will use that.
The trick to get it on without bobbles is to start on the long edge and then slowly add it. (Keep the 'paper' on as long a possible).
(Michael
willyy1991 said:
Ok, i've had a problem with it, first i removed the protector that was as large as the device and made the screen very ugly, then i got the one from the box and putted it on, every air-bulb was gone when i kept rubbing etc.
1 stayed, under that bulb there was something white, i found out it was a 'piece' of dust.
It was kind of annoying so i removed the screen-protector, now when im trying to put it on i get lots of 'dust-bubbles',
Anyone has an idea of how to do it or should i just leave my diamond without the screen protector?
Click to expand...
Click to collapse
The original is washable. Wash it and dry it with a paper towel that sucks in the water bubbles, wipe dry and clean your screen and reapply it.
By the way, this goes to Accessories forum.
mhfalken said:
If you remove the protector, then there will alway be dust next time, because the dust get stuck to the protector glue. (I have also remove mine several times)
I have tried zagg, but I can't recommend it. It is a little sticky (which they also says on their homepage) and I don't like that. The floating feeling is gone. It is also not that invisible.
I have selected to buy a new original protector, and will use that.
The trick to get it on without bobbles is to start on the long edge and then slowly add it. (Keep the 'paper' on as long a possible).
(Michael
Click to expand...
Click to collapse
Where can you buy a new one, i need it really fast because my phone is without protection right now and no i am affraid of pressing it to hard to leave a permanent mark..
tnyynt said:
The original is washable. Wash it and dry it with a paper towel that sucks in the water bubbles, wipe dry and clean your screen and reapply it.
By the way, this goes to Accessories forum.
Click to expand...
Click to collapse
I did this and the dust keeps coming at the protector and my phone and there will be bubles because the dust gives it a 'height-problem'..
I bought invisible shield for mine, its pretty nice after say 4 days from install.
For first 2 days it might seem really bad but it gets much better.
I somehow scratched it without even noticing it, so I sent picture to zagg and they sent me new one. Even though scratch was very minor.
mhf
hi. this my first post on this web site
excuse me for my bad english
i have a diamond and i remove orginal screen protecter because i write sms with letter recorgnizer and the area that i write words on the screen become white and scratch. i remove orginal and buy a new one that for iphone. i cut it for my phone size and apply it. its sooo much stiky and i have a problem like orginal one.i wnat to remove it and when i do it a tiny layer of glue stand on my diamond screen. i can't clean it. and it give a bad scene to my diamond.
what's your idea. i give u a pichture from my diamond screen.
Perhaps you could use isopropyl alcohol, usually it will remove glue without damaging the plastics surface (in that case: your display). DON'T USE nail polish remover, acetone or even benzine, it will remove the glue too - but your display would look "milky". You can get isopropyl alcohol at the pharmacy.
Tell us if that helped you
mhf said:
hi. this my first post on this web site
excuse me for my bad english
i have a diamond and i remove orginal screen protecter because i write sms with letter recorgnizer and the area that i write words on the screen become white and scratch. i remove orginal and buy a new one that for iphone. i cut it for my phone size and apply it. its sooo much stiky and i have a problem like orginal one.i wnat to remove it and when i do it a tiny layer of glue stand on my diamond screen. i can't clean it. and it give a bad scene to my diamond.
what's your idea. i give u a pichture from my diamond screen.
Click to expand...
Click to collapse
You might be interested in this thread: http://forum.xda-developers.com/showthread.php?t=421229
I didn't get a screen protector with mine... I mean, I had a shipment protector with a little tab for peeling off, but nothing came with it for long term use. It's a Sprint, did they just not include one?
the exim screen protector is very good and smooth
I always use the Brando screenprotectors. See their online shop. They ship worldwide for only $ 3,00 shippingcosts.
It is very easy to install, easy to clean, 100% garanteed scratch free and very durable.
iixnullxii said:
I didn't get a screen protector with mine... I mean, I had a shipment protector with a little tab for peeling off, but nothing came with it for long term use. It's a Sprint, did they just not include one?
Click to expand...
Click to collapse
I've got a Sprint Diamond too, and didn't think I got a protector either, but it was in the separate bag that has the manuals. It should have come with one...Wish it woulda come with an extra one too, oh well.
I had the same problem with misalignment and dust bubbles with the HTC protector on my first few tries...i did however fix the problem...
Take the protector off and clean off the phone...use a microfiber cloth to get all the dust and oil off...after its super clean...take the protector and wash it off with some mild soap...rub the soap in with your fingers and get it clean. Be sure to note which side is down. After its clean, hold it around the edges and let the water bead off...i blew on the protector to get residual water off...some water is ok...actually helps with the install...the basically carefully apply it still holding the sides making sure not to leave finger prints. Start from the top and work your way down... i used a credit card pushed against the microfiber cloth to squeegie the protector down...be carefull with the few drops of water. After you have it down...there might be little bubbles or what looks like water spots where water is trapped under the screen...dont worry...just use your phone and leave it alone. Once it heats up from the excessive phone use it will start to dry up and the protector will come out very nice and smooth. Mine is flawless and i did the wash with soap apply and remove at least 3 or 4 times to get it right...Just be patient
I use screen protector from martinfields, what do you say about, anyone have one??
I think the best in market
My HTC one got a nasty scratch in it last week, so I ordered a Martin Fields.
It arrived this morning and I've got it on without any problems. So far I've noticed:
- It's not a perfect fit like the HTC one was. The hole for the speaker at the top is larger than the hole in the phone. It's not bad though.
- The visibility of the screen does seem better than the HTC protector, but I don't know if it's just the placebo effect of having a more expensive protector.
- It was _easy_ to put on, no bubbles at all
- The protector for the bottom buttons is awful. The circle is just the right size to completely hinder using the touch wheel and it's obvious that you've got a piece of plastic on there.
- It seems smoother than the original HTC one when using the stylus.
So far I'm impressed with it. I didn't bother with the camera hole or bottom hard buttons. The in box HTC one was fine for me, but when I got a scratch on it (my stylus somehow developed a sharp edge), it annoyed me.
I'm using the one supplied as standard with a uk CompactIV and it's great- you can hardly tell it's thereand the sensitivity seems fine.
I have 24 diamond screen protectors. Because i bought 24 diamonds and sold them all without screen protectors so i am sorted untill i buy another phone.
After using the martin fields one for a couple of days, I think it's great.
The screen looks much brighter and clearer through it (I thought the HTC one was great, but I do notice the difference). Plus the smoothness is brilliant, theres pretty much no friction for the stylus or fingers
where can i purchase the htc screen protector? the original that comes in the box...
I was peeling off my bodyguardz screen protector to put on a new one, and the darn thing was so stuck to my screen it took a lot of force to peel it off. As I was pulling it away I noticed that my "screen" seemed to be lifted off my HTC fuze!! After I kept pealing I noticed from the side that there was a film that was peeling off that had adhesive to the screen with the body guardz. I'm too scared to proceed and have left my phone that way.. my question is there a protective film (not counting any sort of screen protector even the one that comes with the fuze) on top of the screen, and that was what was peeling off? Is that film important for the touch screen itself aside from protecting it (or does it keep some part of the screen in place etc etc).
Thanks in advance, the screen does turn on and is still touch sensitive but I'm too scared to peel off the rest of the body guardz that have that "film" come off with it.
Someone removed that and lost their touchscreen so be scared IMHO.
aaahhhhh can you link me to that post? I tried doing a search, I cant separate that film from the bodyguardz either... =(
I think it is the digitizer that is comming off, or part of it anyways... the only thing I could find online is this
http://forum.xda-developers.com/showthread.php?t=392301&page=3
Post#27
"--------------------------------------------------------------------------------
Hello again
So
After giving it a lot of thought, i decided to disasamble my phone to see if i can get rid of that stain. I have to say that it was a bit difficult to folow the guide but i finaly opened my cruise.
In the end i realised where was my problem.
The digitizer has 2 components:
A glass layer witch is on the bottom, and a plastic one (on top) witch are keppt together by twosided adhesive tape.
The "stain" was caused by the plastic layer, witch for some reason wasn't staying straight (it had a small bump...).
I figured this out when i pealed this layer from the glass one, witch i shouldn't have done because the layer has a connection with the glass and the small ribbon witch goes into the mb.
So for any of you, if you encounter my problem, better let it that way, cause the alternative will be a new digitizer.
I'll go to the htc service in romania to see how much will they charge me for a new one, and if the amount is to much, i'll try to order one from the web(altho not that many companies ship to my country )
Wish me luck.
LE: I have a question thow
How can you remove the digitizer from the casing ?
I tryed to pull it but i was afraid to damage something (else).
--------------------------------------------------------------"
http://forum.xda-developers.com/attachment.php?attachmentid=100767&d=1216648485
Heres a link to the picture the guy with the polaris took... the HTC black bordered part is still on the screen but there is a film sitting on top of it thats peeling off with the bodyguardz.
This is a cruise polaris and not a raphael but I think this post is referencing the same thing. Does anyone have any advice to give me? My phone is still sitting there with half of the "digitizer" peeled off stuck to the bodyguardz grrrrrrr
bump...........
tassadar898 said:
I was peeling off my bodyguardz screen protector to put on a new one, and the darn thing was so stuck to my screen it took a lot of force to peel it off. As I was pulling it away I noticed that my "screen" seemed to be lifted off my HTC fuze!! After I kept pealing I noticed from the side that there was a film that was peeling off that had adhesive to the screen with the body guardz. I'm too scared to proceed and have left my phone that way.. my question is there a protective film (not counting any sort of screen protector even the one that comes with the fuze) on top of the screen, and that was what was peeling off? Is that film important for the touch screen itself aside from protecting it (or does it keep some part of the screen in place etc etc).
Thanks in advance, the screen does turn on and is still touch sensitive but I'm too scared to peel off the rest of the body guardz that have that "film" come off with it.
Click to expand...
Click to collapse
That has happened to me as well. I'm afraid you'll just have to get another digitizer off ebay.
ughhh!! any help on the assembly?
Spray some of the liquid that came with it on the touchscreen (underneath the bodyguardz screen protector; spray little by little or use your finger) and it should come off with a little less effort without tearing out the screen. That's what I did. Btw, make sure you turn off your phone and dry it before you turn it back on if you do that
Why would you ever care if you damage the screen while taking it out since you're probably replacing it anyway? I have no clue. But I thought I would give it a try, and now i'm sharing.
So I managed to remove the screen and the frame without breaking anything (granted the screen wasn't working already)
i.imgur.com/cpKVP
What I did was cut off little strips from a credit card or any sort of plastic card. Then heated only the back side of the frame. I figured if I tried heating the screen from the front, the glass and screen adhesive might start separating. Then I worked the strips in between the frame and screen through the holes in the frame.
i.imgur.com/iql8z
You might be wondering why there are places ground down on the frame... I'll get to that...
Just worked at that for probably an hour constantly reheating. Just unsticking the adhesive from the back of the screen and the frame. I finally managed to be able to fit a card in through the bottom.
i.imgur.com/kuDuP
Then I just used that to unstick the rest of the adhesive.
Now, about why a lot of the frame has grinding marks. I have the Verizon GS3, but I broke the old screen. I found a water damaged sprint gs3 on craigslist for $100. so I figured I would see if it would fit, and if it didn't I could sell the screen for maybe 200-250 on ebay. It didn't fit, not perfectly... but I really didn't feel like waiting for it to sell. So instead, I made it fit, I almost got it perfect, and it all worked just perfectly when I had it all together. But I wanted it to fit perfectly, so naturally, on my last attempt, I ground down a little too far and nicked part of one of the ribbon cables. So I figured I'd try taking it apart without breaking it... If anybody has any suggestions on how to fix the ribbon, feel free to say something!
i.imgur.com/MN9Fl
how bad did you butcher the ribbon? you could maybe try circuitwriter conductive pen to draw the contacts back. http://stcwk.blogspot.com/2010/03/how-to-repair-broken-ribbon-cable.html
I got the S3 like 3 days ago, and earlier today it just slide out of my pocket when i was crouched, (I know, i placed an order on a case 2 days ago but thought i would be careful around the house with the phone til than) , Crack lower right corner, do you think you could seperate the glass/digitizer from the lcd screen? to just replace the glass/digitizer http://i46.tinypic.com/5lyx41.jpg
The pen might be worth a try. As for separating the glass from the screen, it's possible, but I really wouldn't recommend it. Just because of how the screen is manufactured, there is a film of glue between the front glass and the screen, it would be impossible to glue it back together without leaving bubbles in between, so it would look way worse than just the little bit of cracked screen you have.
(Couldn't think of a more descriptive title, sorry!)
I have an Ultimate Shield tempered glass protector on my z3. It's on pretty much perfectly (very slightly offset but only by 1mm or something so I'm happy with it). It took me a week or so to pluck up the courage to actually put the thing on because I went through a few non-tempered glass ones and was never happy with dust or bubbles. Whilst applying it I started a very brief attempt at moving it into place but decided it wasn't worth the risk but I'd already lifted the corner of the protector and it's not quite flat. Can anyone think of any way of getting this corner to stick down properly? Perhaps slide something underneath it to apply some sort of glue-like stuff perhaps? It's not worth another £10 for a replacement but if there's a trick I can apply to fix this one I'd love to hear it.
Speaking from experience: just leave it at that! I've gone through many glass protectors and I always reapply them to get them aligned perfectly and I ALWAYS end up getting uneven parts. Whenever I'm happy with the alignment I just let the uneven spots be there and they will disappear within a few weeks. The key is really just leaving it just the way it is, the more you try to fix it the more you're going to mess it up and the longer it's going to take to fully adhere to the display. So yeah, just don't do anything about it and the problem will fix itself.