Related
Ok, i've had a problem with it, first i removed the protector that was as large as the device and made the screen very ugly, then i got the one from the box and putted it on, every air-bulb was gone when i kept rubbing etc.
1 stayed, under that bulb there was something white, i found out it was a 'piece' of dust.
It was kind of annoying so i removed the screen-protector, now when im trying to put it on i get lots of 'dust-bubbles',
Anyone has an idea of how to do it or should i just leave my diamond without the screen protector?
Protection
Personally i prefer to have a screenprotecter on my device. I can recommend invisible shield. its very durable and will not be scratched. check it out on www.zagg.com
If you remove the protector, then there will alway be dust next time, because the dust get stuck to the protector glue. (I have also remove mine several times)
I have tried zagg, but I can't recommend it. It is a little sticky (which they also says on their homepage) and I don't like that. The floating feeling is gone. It is also not that invisible.
I have selected to buy a new original protector, and will use that.
The trick to get it on without bobbles is to start on the long edge and then slowly add it. (Keep the 'paper' on as long a possible).
(Michael
willyy1991 said:
Ok, i've had a problem with it, first i removed the protector that was as large as the device and made the screen very ugly, then i got the one from the box and putted it on, every air-bulb was gone when i kept rubbing etc.
1 stayed, under that bulb there was something white, i found out it was a 'piece' of dust.
It was kind of annoying so i removed the screen-protector, now when im trying to put it on i get lots of 'dust-bubbles',
Anyone has an idea of how to do it or should i just leave my diamond without the screen protector?
Click to expand...
Click to collapse
The original is washable. Wash it and dry it with a paper towel that sucks in the water bubbles, wipe dry and clean your screen and reapply it.
By the way, this goes to Accessories forum.
mhfalken said:
If you remove the protector, then there will alway be dust next time, because the dust get stuck to the protector glue. (I have also remove mine several times)
I have tried zagg, but I can't recommend it. It is a little sticky (which they also says on their homepage) and I don't like that. The floating feeling is gone. It is also not that invisible.
I have selected to buy a new original protector, and will use that.
The trick to get it on without bobbles is to start on the long edge and then slowly add it. (Keep the 'paper' on as long a possible).
(Michael
Click to expand...
Click to collapse
Where can you buy a new one, i need it really fast because my phone is without protection right now and no i am affraid of pressing it to hard to leave a permanent mark..
tnyynt said:
The original is washable. Wash it and dry it with a paper towel that sucks in the water bubbles, wipe dry and clean your screen and reapply it.
By the way, this goes to Accessories forum.
Click to expand...
Click to collapse
I did this and the dust keeps coming at the protector and my phone and there will be bubles because the dust gives it a 'height-problem'..
I bought invisible shield for mine, its pretty nice after say 4 days from install.
For first 2 days it might seem really bad but it gets much better.
I somehow scratched it without even noticing it, so I sent picture to zagg and they sent me new one. Even though scratch was very minor.
mhf
hi. this my first post on this web site
excuse me for my bad english
i have a diamond and i remove orginal screen protecter because i write sms with letter recorgnizer and the area that i write words on the screen become white and scratch. i remove orginal and buy a new one that for iphone. i cut it for my phone size and apply it. its sooo much stiky and i have a problem like orginal one.i wnat to remove it and when i do it a tiny layer of glue stand on my diamond screen. i can't clean it. and it give a bad scene to my diamond.
what's your idea. i give u a pichture from my diamond screen.
Perhaps you could use isopropyl alcohol, usually it will remove glue without damaging the plastics surface (in that case: your display). DON'T USE nail polish remover, acetone or even benzine, it will remove the glue too - but your display would look "milky". You can get isopropyl alcohol at the pharmacy.
Tell us if that helped you
mhf said:
hi. this my first post on this web site
excuse me for my bad english
i have a diamond and i remove orginal screen protecter because i write sms with letter recorgnizer and the area that i write words on the screen become white and scratch. i remove orginal and buy a new one that for iphone. i cut it for my phone size and apply it. its sooo much stiky and i have a problem like orginal one.i wnat to remove it and when i do it a tiny layer of glue stand on my diamond screen. i can't clean it. and it give a bad scene to my diamond.
what's your idea. i give u a pichture from my diamond screen.
Click to expand...
Click to collapse
You might be interested in this thread: http://forum.xda-developers.com/showthread.php?t=421229
I didn't get a screen protector with mine... I mean, I had a shipment protector with a little tab for peeling off, but nothing came with it for long term use. It's a Sprint, did they just not include one?
the exim screen protector is very good and smooth
I always use the Brando screenprotectors. See their online shop. They ship worldwide for only $ 3,00 shippingcosts.
It is very easy to install, easy to clean, 100% garanteed scratch free and very durable.
iixnullxii said:
I didn't get a screen protector with mine... I mean, I had a shipment protector with a little tab for peeling off, but nothing came with it for long term use. It's a Sprint, did they just not include one?
Click to expand...
Click to collapse
I've got a Sprint Diamond too, and didn't think I got a protector either, but it was in the separate bag that has the manuals. It should have come with one...Wish it woulda come with an extra one too, oh well.
I had the same problem with misalignment and dust bubbles with the HTC protector on my first few tries...i did however fix the problem...
Take the protector off and clean off the phone...use a microfiber cloth to get all the dust and oil off...after its super clean...take the protector and wash it off with some mild soap...rub the soap in with your fingers and get it clean. Be sure to note which side is down. After its clean, hold it around the edges and let the water bead off...i blew on the protector to get residual water off...some water is ok...actually helps with the install...the basically carefully apply it still holding the sides making sure not to leave finger prints. Start from the top and work your way down... i used a credit card pushed against the microfiber cloth to squeegie the protector down...be carefull with the few drops of water. After you have it down...there might be little bubbles or what looks like water spots where water is trapped under the screen...dont worry...just use your phone and leave it alone. Once it heats up from the excessive phone use it will start to dry up and the protector will come out very nice and smooth. Mine is flawless and i did the wash with soap apply and remove at least 3 or 4 times to get it right...Just be patient
I use screen protector from martinfields, what do you say about, anyone have one??
I think the best in market
My HTC one got a nasty scratch in it last week, so I ordered a Martin Fields.
It arrived this morning and I've got it on without any problems. So far I've noticed:
- It's not a perfect fit like the HTC one was. The hole for the speaker at the top is larger than the hole in the phone. It's not bad though.
- The visibility of the screen does seem better than the HTC protector, but I don't know if it's just the placebo effect of having a more expensive protector.
- It was _easy_ to put on, no bubbles at all
- The protector for the bottom buttons is awful. The circle is just the right size to completely hinder using the touch wheel and it's obvious that you've got a piece of plastic on there.
- It seems smoother than the original HTC one when using the stylus.
So far I'm impressed with it. I didn't bother with the camera hole or bottom hard buttons. The in box HTC one was fine for me, but when I got a scratch on it (my stylus somehow developed a sharp edge), it annoyed me.
I'm using the one supplied as standard with a uk CompactIV and it's great- you can hardly tell it's thereand the sensitivity seems fine.
I have 24 diamond screen protectors. Because i bought 24 diamonds and sold them all without screen protectors so i am sorted untill i buy another phone.
After using the martin fields one for a couple of days, I think it's great.
The screen looks much brighter and clearer through it (I thought the HTC one was great, but I do notice the difference). Plus the smoothness is brilliant, theres pretty much no friction for the stylus or fingers
where can i purchase the htc screen protector? the original that comes in the box...
Every gadget owner loves their devices be it Cell Phones, Laptops, GPS, Gaming Consoles, etc. and would never want our devices to get scratchy, dirtily, peel off or loose their color and shine. For this some of us freaks keep cleaning out devices or cover them with cheap looking low quality plastic guard just to see it getting peeled off soon and getting all scratches just to buy another one in few weeks. This is because many of us are unaware of some of the finest Body Scratch Guards which themselves can never attain a scratch.
Yes, that’s true and this article is about Top 4 Body Guards covering not just the screen but the complete body of your device, that I came across. I’ll just be giving my honest reviews about all four of them and leave the rest on you to decide which you prefer.
you can find the comparison here:
http://winmo.techparaiso.com/best-s...isible-shields-vs-ghost-armor-vs-body-guardz/
Well based on peoples experience here....http://forum.xda-developers.com/showthread.php?t=398021
I can safely say Invisible shield is not a good solution. Generally anything that adheres to your device runs the risk that your finish will lift off if you ever decide to remove the shield.
band27 said:
Well based on peoples experience here....http://forum.xda-developers.com/showthread.php?t=398021
I can safely say Invisible shield is not a good solution. Generally anything that adheres to your device runs the risk that your finish will lift off if you ever decide to remove the shield.
Click to expand...
Click to collapse
i would still like to see some screenshots of bestskinsever for diamond as nothing is available anywhere.
want the best protector? Buy a psp HORI Protector, cut to size. 100% invisible and only a knife will scratch it. 2 for .99 on ebay
I'd also love to hear people experience with Best Skins Ever. I'm a sucker and always buy the zagg.com stuff, price = quality after all... but would be willing to grab a BSE skin based on peoples reviews, as the markup on zagg.com is ridiculous.
One thing, I dislike with the zagg.com skins is, after a while the protector appears as if it has a gasoline like stain in the middle of it, symmetrical to about half an inch away from the edge of the screen on all sides. So basically a mini rectangle on the inner portion of the display. Any else experience this? and does the BSE have this tendency?
P.S. Don't forget BodyGuardz
I've been using Invisible shield by Zagg since I bought my Diamond and I completly agree with Lokosis. I also feel the corners are becoming a bit rough, it looks like someone can just pull it off.
* Doesn't fit into my HTC pouch anymore (see picture attached).
* Attracts a lot of dust.
* Don't need a bulky case anymore.
* Gives the back cover a shiny effect.
well yesterday i received my best skins for diamond. i must say delivery was really fast but a little disappointed. i'll tell you why later.
also i'll be posting the pics of my diamond soon.
I bought a full cover from invisible shield about a week and a half ago but am still waiting for it to be shipped to me since I live in Australia and there is not stock here.
Didn't realize there was a cheaper alternate to it. I've got to say I'm a bit worried after just reading that post that says it can damage the screen when you remove it after a while...but hopefully I will never have to remove it
AdamHC said:
I bought a full cover from invisible shield about a week and a half ago but am still waiting for it to be shipped to me since I live in Australia and there is not stock here.
Didn't realize there was a cheaper alternate to it. I've got to say I'm a bit worried after just reading that post that says it can damage the screen when you remove it after a while...but hopefully I will never have to remove it
Click to expand...
Click to collapse
nothing to wory dude. even i first bought IS and den after an hour got to know about BSE so i ordered that too. i'd a talk with IS ppl and they say that when i receive the item, then i should take out the screen guard, put it in envelope and send it back to there address. thats it. they said they dont need the box of spray or anything. just the invisible shield in an envelope. and as soon as they receive it, they'll refund you the money. sending it back in envelope is much cheeper and you save alot. so order BSE now and wait for IS to arrive and send it back
invisible? are you blind?
Well, it's a good screen protector, but it's definitely not invisible...
Are you blind guys?
I just got the screen one and not the whole case skin because I own an o2 Ignito which has a lovely-grippy-rubber-feeling-matt-black back cover, although it is not as sexy as the standard Diamond my wife has.
I was honestly quite disappointed because it is expensive and honestly looks crap compared to cheaper alternatives.
Have you ever tried Vikuiti by 3M guys?
I have it on my Orbit (it's a PSP screen protector, I opened the Orbit and cut the film on the proper size of the display, once re-assembled you can't see any edge at all) it's impossible to leave fingerprints and it is anti-reflection.
The Diamond one is gloss finishing instead, it costs € 8 on eBay (german seller but ships worldwide)
The invisible shield finally arrived. It wouldn't stick to my screen...lol
Well it stuck to the screen, just that the edges are supposed to bend and protect the sides too and no matter how long i held the edges in their positions for they would just unpeel themselves after a couple of minutes. Gave up on the screen, the rest all went on easily and without any visible bubble thingies. I'm not sure if I really care enough to get a new screen protector for the screen, I was more worried about the back of the phone to be honest
Still kinda dissapointed that the screen protector ended up failing for me
AdamHC said:
The invisible shield finally arrived. It wouldn't stick to my screen...lol
Well it stuck to the screen, just that the edges are supposed to bend and protect the sides too and no matter how long i held the edges in their positions for they would just unpeel themselves after a couple of minutes. Gave up on the screen, the rest all went on easily and without any visible bubble thingies. I'm not sure if I really care enough to get a new screen protector for the screen, I was more worried about the back of the phone to be honest
Still kinda dissapointed that the screen protector ended up failing for me
Click to expand...
Click to collapse
i really don understand where u guys fail. i understand that d edges don stick up but it takes half an hour effort to do it. its easy but takes times and u constantly hav to make it stick.
rest both BSE and IS are great. the point is to make it wet properly and den apply.
the only issue i had is that the IS solution went in my front camera screen and has made it blurred.
rest both are the same according to me.
also to be noted that you do not need to use IS spray. instead you can even put your IS in soapy solutions and apply it like BSE.
the aim is to 1st attch is properly on front screen. let it dry and then bend the edges.
sunnyin86 said:
i really don understand where u guys fail. i understand that d edges don stick up but it takes half an hour effort to do it. its easy but takes times and u constantly hav to make it stick.
rest both BSE and IS are great. the point is to make it wet properly and den apply.
the only issue i had is that the IS solution went in my front camera screen and has made it blurred.
rest both are the same according to me.
also to be noted that you do not need to use IS spray. instead you can even put your IS in soapy solutions and apply it like BSE.
the aim is to 1st attch is properly on front screen. let it dry and then bend the edges.
Click to expand...
Click to collapse
I used enough of the solution, got it lined up perfectly with the phone. It was the edge bits that have to be bent to protect the sides where I went wrong. Just couldn't get them to stick and stay stuck properly for some reason
AdamHC said:
I used enough of the solution, got it lined up perfectly with the phone. It was the edge bits that have to be bent to protect the sides where I went wrong. Just couldn't get them to stick and stay stuck properly for some reason
Click to expand...
Click to collapse
it takes alot of time for sure. for half an hour i kept trying and thought maybe the adhesive wasnt strong enough. but there are two things, 1st you have to use alot of spray to smoothly allign it on screen and then this excess spray avoids the sides to stick onn. so patience, repeated efforts and only when the solution dries up, that is when it starts to stick onn. very tough for sure but in the end it pays off.
BUT the diff bet IS and BSE is that BSE only covers the screen and does not cover the sides so there is no bending problem like IS.
sunnyin86 said:
it takes alot of time for sure. for half an hour i kept trying and thought maybe the adhesive wasnt strong enough. but there are two things, 1st you have to use alot of spray to smoothly allign it on screen and then this excess spray avoids the sides to stick onn. so patience, repeated efforts and only when the solution dries up, that is when it starts to stick onn. very tough for sure but in the end it pays off.
BUT the diff bet IS and BSE is that BSE only covers the screen and does not cover the sides so there is no bending problem like IS.
Click to expand...
Click to collapse
In that case I think I might buy one of the BSE. I think that trying to protect the sides is simply too much effort and is tedious. Besides that, the sides are fairly scratch resistant and you can't even see those scratches if them do occur without having to look for them anyway. I really think IS should have skipped trying to protect them or made a second piece to go around the outside.
both are sam so betteer to opt for bse. am loving it.
more pros n cons on bse please......
i found that they didn't provide spray bottle....
mygreatdiamond said:
more pros n cons on bse please......
i found that they didn't provide spray bottle....
Click to expand...
Click to collapse
its best not to have spray. as spray gets into front camera and spoils it. best to use simple soap water.
BodyGuardz vs BestSkinsEver
Hello,
Here is my experience. I had a InvisibleSHIELD on my iPod Classic and it was great so I was considering buying one but after reading some of the the feed back it seemed that the product was good but the fit for our diamonds and even the iPhone (which i am now looking for) was not great.
I then heard about BestSkinsEver and because it was so cheap decided to go ahead and try it. I got it over 2 months ago and when I received it I applied it immediately. I have done a few of these so and since I am some what of a perfectionist I applied it to the best I could. It looked OK but after a few weeks the corners started peeling. Also due to the way the backing is placed it puts stress in areas which causes other areas to lift off (this is mostly on the corners). I ended up using a nail clipper to start clipping areas that were peeling off. After about 2 months it started to peal even more so I decided to go back to the reviews and see what was available. After doing some research I decided to go with the 12 piece BodyGuardz. It came in a set of 2 which is nice when i transfer the phone to my wife.
So all of this is to tell you that my first impressions of the BodyGuardz is well as good as I felt when I put the InvisibleSHIELD on my first iPod Classic. For me it did take a while (about 2-3 hours) to apply. This was not done in one sitting but instead because it was a 12 piece I applied each piece with 10 minute intervals allowing for tackiness to set in and so it would be easier to handle as I continued with the many pieces. First major thing I noticed and was really happy about was the BodyGuardz stickiness was considerably more than the BestSkinsEver. It stuck to the corners almost right away. Although throughout the process I did press down on the corners it was quite a bit easier as the BestSkinsEver did not have good stickiness. Also on a side note when i removed the BestSkinsEver it came of like a sticker which i know from my previous iPod is not normal and it usually takes a lot more effort to get it off carefully. Overall I am very happy at my first impressions of the BodyGuardz and the quality of the material seems to be better than the BestSkinsEver. Not to mention the 12 piece may seem like a lot of work but having individual pieces allows for no stress on the film in weird areas allowing it to sit flat with no parts lifting off (so far, i'll update in a month or two). Which is not the same case for the BestSkinsEver and from what I hear the InvisibleSHIELD. Newayz I hope this review helps someone.
Justin
Mr. Makk said:
its best not to have spray. as spray gets into front camera and spoils it. best to use simple soap water.
Click to expand...
Click to collapse
I never sprayed the device only the shield itself. I would not recommend spraying the device. That said I do like the spray on the shield as it is a bit more even but you can use any spray bottle. I got one with Bodyguardz but there was not enough fluid in it so i had to fill it up with my own solution newayz.
Sorry if this is the wrong place to ask...
I received my brand new Nexus S today, but I was disappointed to find a scuff on the screen, even under the protector that was shipped with it. Its small enough I don't want to ship it back, but it is annoying. Its def not a scratch. I've tried screen cleaner and rubbing it really hard, but it doesn't go away. I'm not for sure what kind of screen it is, so does anyone have any tips that won't scratch but might give me a chance to remove it?
It's likely to be a imperfection in the oleophobic coating. Normally it takes a few days and can wear off but you seem to have been unlucky. A way to prove it is to clean the screen well with a microfibre cloth - the scuff should now be almost invisible. If after you've touched the screen a few times it becomes much more obvious the diagnosis is confirmed.
Yeah that sounds exactly like the problem. Unfortunately it didn't get better. Its actually just above the display, closer to the camera and speaker. I was just hoping there was a quick fix to buffering it.
So I just took out my sensation from the box and noticed the stock screen protector was off set and already peeling back a great amount on the top corner. I looked closely and noticed that the small tab at the top of the screen protector is actually inside the ridge of the phone, in that small thin crack where the front-screen ends. That was what cause the screen protector to not lay flat and started bending inward. I slowly peeled the protector back and when it came to the part that was "stuck" or jammed into the crack it took a good tug (I guess it was the adhesive...or it was really in there) for it to pop out. This couldn't have done any damage right? The small crack leads to nothing does it?
Probably just means it got caught in the gap when being fitted. I assume when you say 'crack' you mean the gap where the screen meets the rest of the body of the phone?
Yeah, where the black part ends.
Also, I have removed it and replaced it on more accurately since then and noticed it sticks to the screen very well, even attaching itself to parts that I have not even smoothed my fingers over yet, must be the static? Are there any disadvantages in using this as opposed to buying a new screen protector?
If it works then continue using it. We don't get them pre-fitted in the UK so I bought a 3rd party one
edit: delete this thread please mod thank you
Hi,
first of all i will start with saying that I suppose I am not entitled to the official samsung warranty or customer service, as i bought my phone form ebay (unlocked version, shipped from Hong Kong). Unfortunately in my absence my younger brother managed to lightly scratch the screen when he was playing with it, he got scared and tried to get rid of the scratch by rubbing it with toothpaste (it's something he read on the internet, supposedly it was supposed to "polish" the light scratches and get rid of them). Of course it didn't work, and just made it worse. In fact it created a dull, round spot on the screen just where the scratch is, it was hard to clean and attracted moisture easily, moreover when screen was on you could notice a grainy/greasy spot. I guessed, that the toothpaste must've removed the oleophobic coating on the screen, so I thought i will buy a oleohobic coating kit, which i did. I went to Amazon and order the Crystalusion Liquid Glass, praying for it to fix it. After application it restored the hydro/oleophobic properties in that spot, and made it smooth just like the rest of the screen. Unfortunately the grainy/greasy effect while screen is on remained, and under direct light you can still see the dull spot, so i guess apart of removing the coating, he must've sanded the glass underneath it. I am thinking of putting a second layer of that liquid glass thingy, hoping it will fill the sanded pores, and smoothen the glass even more, maybe it will do the trick. It's not something that disturbs the every day usage, but i just cant get over the effect on the screen when its on .. and just the knowledge of not having a perfect, beautiful infinity display just after 3 weeks of having the phone is making me cry. And yes, I know i could use a screen protector .. I've tried those, and none of them suited me, first (samsung original) was not compatible with the case, and next two (wet application) ruined the screen quality (created that mentioned greasy/grainy effect on the entire screen), and after all the TGP reviews I decide just not to waste money on them, so i decided to go naked screen+case ... Do you think there any hope for me? Any ideas on how to fix it, or if it is even possible? Do You think that i can contact Samsung with a device bought on ebay? I will be grateful for any answer, and sorry if this is not the right place for this kind of thread.
Well it won't be covered udner warranty because it's damage caused by you. It's not a faulty product.
But you can maybe have it repaired by Samsung. They can replace the display with a new one. But this is quite expensive.
Putting a screen protector on might help mask the marks on the screen and make them less noticeable.