First Of All make Sure you have a backup of your stock rom.
[Not Responsible If Your Device Bricks and All, Do it at your own Risk]
Step 1: Download SP-Flash Tool
Step 2: Make sure you have your scatter file for XPlay P9i if u dont have it then get it from here
Step 3: Download the Recovery (not ported by me all rights given to the porter)
Note: After Downloading both the files Put them into a folder and then load the scatter file
Step 4: Make sure to enable USB Debugging From Developer Options and connect your phone by removing the battery and leave it with USB cable attached with the PC.
Step 5: Open SP-Flash tool and Load the Scatter file and hit the download button and when its done it will show the green ring with a tick inside saying download ok
Step 6: Insert the battery and go in recovery mode pressing volume + and power button
Step 7: Flash the SuperSu Zip and voila its done.
Related
Requirements For Root Symphony i50:
1. Windows PC
2. Mobile
3. installment of usb/vcom drivers
4. SuperSU
Disclaimer:
I am not responsible for bricked devices.
I will not give support, if you did not follow flash instructions 'word by word'.
Click to expand...
Click to collapse
Download Require Files - Here>>
And Extract
Step 1 : First install the vcom & usb drivers
Step 2: Copy "SuperSU.zip" in your phone memory.
Step 2 : Now open sp flash tools & select scatter file "MT6580_Android_scatter.txt" with recovery.img.
Step 3 : Remove battery From Phone, Click "Download" on sp flash tool & Connect USB With Cable with PC,
Wait till Successfull.
Step 4 : Now connect battery & press on Vollum Up key and power key at same time.
Step 5 : Press on install button and Select "SuperSU.zip"
Step 6: Now Swipe on install Button.
Step 7 : After successfully instaling supersu, reboot the system.
A Video example (its for i10) - https://www.youtube.com/watch?v=A-hbCWRHaYw&feature=youtu.be
Hit Thanks if you success.
It worked now my i50 is rooted now but i need a cm14 custom rom for it can you help? Please
I need a Symphony i18 twrp or root
Place help us
Need CWM recovery zip file for Symphony Z15
My device name is Symphony Z15 I need CWM recovery zip file,plz help.
Pre-Requisites
1- You need a PC
2- Sp Flash tools
3- Twrp recovery( search Google)
4- 7zip
5- mtk vcom drivers(also search Google)
Let's Begin
: 1st step install the adb,do it right then reboot
2nd step unzip the twrp folder and get to the the end where you will see a scatter file and the recovery image, then minimize
3rd step open the spflash tools folder then double click on flash_tool
: 4th step click on the choose button in the middle of the three choose buttons you see
5th step locate the folder with the scatter file and twrp
6th step, you will see only the scatter file, double click on it
***********************
The real rooting begins here
***********************
: Click the download button, then put off your phone and remove the battery,
Then connect your phone to the pc
: It will then install twrp
: Once a good sign on the screen of the laptop, unplug the phone
: Then put back the battery of the phone
: Then press and hold the power button and volume up button at the same time till your recovery shows
: Click on the install button on twrp, then locate the SuperSU zip I sent to you, click it and swipe to install, then reboot...
:You should see the SuperSU icon in your app menu upon reboot
Good tut
I need a lineage 13 or 14- based custom rom for tecno w2. Any leads on where to find one? Thanks
***Disclaimer: I am not to held responsible if you somehow manage to brick, boot loop, or mess up your device in any way. If you correctly follow the instructions I've given you should not have these issues. Please keep in mind that you are the one choosing to make these changes to your phone, not me or anyone else.***
IMPORTANT! This will only work on this version of the phone! DO NOT try it on any other variant!
Instructions:
1: Plug your phone into your computer with the USB cable
2: Power your phone off
3: Hold the Volume Down, Home, and Power buttons until the phone asks if you want to enter download mode, then let go of the power button
4: Press Volume Up to enter download mode
5: Download the CF-Auto-Root file from My Drive below
6: Download Odin from My Drive
7: Unzip the root file into a folder and run Odin
8: Once Odin loads up click on "AP" and go to where you extracted the root file to, then choose "CF-Auto-Root-coreprimespr-smg360p.tar.md5
9: The file will pass verification
10: Click "Start" Warning! DO NOT unplug your phone while it's in the middle of downloading the file from your computer!
11: Your phone will reboot about three times after it's done. Don't worry, this is normal. After your phone boots you'll see that SuperSu is installed.
Downloads:
CF-Auto-Root: https://drive.google.com/open?id=0B-tlk6kNn789V2U2UzZDNW5sejg
Odin v3.12.3: https://drive.google.com/file/d/0B-tlk6kNn789bjVCejZ0aHBrc0k/view?usp=sharing
How To Flash Idea Alcatel One Touch 5036D done by Smart Phone Help
flash tool https://spflashtools.com/windows/sp-flash-tool-v5-1812
Firmware 1: http://infopade.com/4sSA
Password: touch
if the above firmware doesn't work for you, try this
Firmware 2: http://infopade.com/4sWN
Password - Gsmtel.in
like video: https://youtu.be/lwN-BLvenEo
Thanks for watching, & please remember to Like this video, if it helped you. I will answer all comments below,
Be sure to share with your friends. !!
Please Reply Me For More Future Videos !!
Once Again, Thanks For Watching Subscribe for more future videos
Steps:
- Step 1: Download and Install the android USB drivers on your computer. In case you have already installed them, you can skip this step.
Step 2: Switch off you Android Phone .
Step 3: Now download the stock ROM or the custom ROM which you want to install on your phone. After downloading, extract the zip file on you system.
Step 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.
Step 5: Form the files listed run the Flash_tool.exe file.
Step 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side.
Step 7: Now locate the scatter file in your custom or stock ROM. It is generally located in the bin/directory.
Step 8: Now click the Download button to start the downloading process.
Step 9: After completed all the above steps, connect your smart phone to your system using the USB cable and press any button other than power button so that your system will detect your device. You can use volume buttons.
Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your device and switch it ON.
Requirements:- Your phone must have atleast 40-50% of battery and USB Drivers
Just for those who may find this helpful. I made a patched boot with EFT Dongle, and it will require you to flash using EFT.
Precaution:
Do know that this procedure will brick your warranty, i will not be held responsible if you brick your device as a result of following this guide. Make sure you follow guide properly and do not miss a single step!
How To Root SM-J730GM Android Oreo,8.1.0, Binary 5.
Step 1. Go to this page, download the Root file
Link To Get Root File
Step 2. Open EFT Dongle Software, Go to Android, Next Samsung.
Step 3. Click On EFT, then Tap On .EFT File and go to where you saved the root file above.
Step 4. Enable Oem and usd debugging mode.
Step 5. Boot device to download mode, connect to PC and scan usb port.
Step 6. Press Flash, wait for device to disaplay verification failed, press reset and wait for device to completely erased and restarted.
Step 7. Set up device and enable Oem and Usb debugging mode again.
Step 8 Boot back to download mode, connect to PC , scan usb port, then press flash finally.
Step 9. Your device should boot up completely now and you will be rooted.
You can install superuser apk from GooglePlaystore if need be.