***Disclaimer: I am not to held responsible if you somehow manage to brick, boot loop, or mess up your device in any way. If you correctly follow the instructions I've given you should not have these issues. Please keep in mind that you are the one choosing to make these changes to your phone, not me or anyone else.***
IMPORTANT! This will only work on this version of the phone! DO NOT try it on any other variant!
Instructions:
1: Plug your phone into your computer with the USB cable
2: Power your phone off
3: Hold the Volume Down, Home, and Power buttons until the phone asks if you want to enter download mode, then let go of the power button
4: Press Volume Up to enter download mode
5: Download the CF-Auto-Root file from My Drive below
6: Download Odin from My Drive
7: Unzip the root file into a folder and run Odin
8: Once Odin loads up click on "AP" and go to where you extracted the root file to, then choose "CF-Auto-Root-coreprimespr-smg360p.tar.md5
9: The file will pass verification
10: Click "Start" Warning! DO NOT unplug your phone while it's in the middle of downloading the file from your computer!
11: Your phone will reboot about three times after it's done. Don't worry, this is normal. After your phone boots you'll see that SuperSu is installed.
Downloads:
CF-Auto-Root: https://drive.google.com/open?id=0B-tlk6kNn789V2U2UzZDNW5sejg
Odin v3.12.3: https://drive.google.com/file/d/0B-tlk6kNn789bjVCejZ0aHBrc0k/view?usp=sharing
Related
HeXen ROM (Froyo) FINAL uesed user
so sdf upgread 2.4.330
1. First you need to download RSD Lite and the drivers from the link above and consequently install the drivers.
2. Then, download the SBF package and extract it.
3. Now, power off the phone and then hold the Volume Up key and Power button together till you enter bootloader mode.
4. After that, launch RSD Lite on your PC and click the “…” button next to the box labeled Filename.
5. Then, choose the SBF file you extracted from the SBF download.
6. Now, plug the device to the PC via USB and RSD Lite should recognize the device.
7. Then, hit the Start button and sit back and relax as the files are flashed to your phone.
8. Lastly, after the files are flashed the phone will reboot.
complate. after Infinity reboot phone
and
1. To begin, download the firmware from the link above, extract the ROM and rename it to update.zip.
2. After that, copy it to the root of your SD card.
3. Then, turn the phone off, and turn it back on by pressing the holding the X key as you press the power button to turn it on and then hitting the magnifying glass and choosing to install the ROM.
4. After the ROM is flashed, you just need to reboot the device once more
this process progress problem 3 to 4
this link Photo problem 3 to 4
not view menu. why?
Here's the complete steps for rooting Samsung Galaxy ACE II (for newbie) thanks to this site (http://support.evanhe.com/2012/11/13/how-to-root-samsung-galaxy-ace-ii/)
1. Download this (https://www.opendrive.com/files/63284615_5VxZV/RootPack.zip)
2. Connect your phone to the PC with the USB cable and open it up in the file manager. (You can then also backup all your stuff.)
3. Right click RootPack.zip and choose extract here, then copy upd.zip to “Phone” on the file manager. Leave your phone connected to the PC via USB up to step #8
4. In the extracted files of RootPack.zip open Odin3-v1.85 -> Odin3 v1.85.exe
5. Click on PDA and choose I8160XXLD8_ready_to_root_ANT.tar.md5 that you’ll find in the extracted files of RootPack.zip Do not click start.
6. Boot your phone in download mode (hold vol down + home + power) and wait a few seconds so that your PC detected it.
7. Now click start in Odin. If the box on the left upper side isn’t turning green hit start a 2nd time.
8. Once odin has finished, disconnect your phone from the USB and boot your phone into recovery mode (vol up + home + power)
9. Select update from SD Card via the volume keys and select upd.zip and flash it.
This is for newbie like me. Credits to evanhe
Cache
can we install the cwm from cahce
if our device is rooted ?
First Of All make Sure you have a backup of your stock rom.
[Not Responsible If Your Device Bricks and All, Do it at your own Risk]
Step 1: Download SP-Flash Tool
Step 2: Make sure you have your scatter file for XPlay P9i if u dont have it then get it from here
Step 3: Download the Recovery (not ported by me all rights given to the porter)
Note: After Downloading both the files Put them into a folder and then load the scatter file
Step 4: Make sure to enable USB Debugging From Developer Options and connect your phone by removing the battery and leave it with USB cable attached with the PC.
Step 5: Open SP-Flash tool and Load the Scatter file and hit the download button and when its done it will show the green ring with a tick inside saying download ok
Step 6: Insert the battery and go in recovery mode pressing volume + and power button
Step 7: Flash the SuperSu Zip and voila its done.
THIS WILL VOID YOUR WARRANTY OR MAY BRICK YOUR PHONE IF NOT DONE CORRECTLY.
I made this because i wanted to play AR games on an unsupported phone, so i want to help other people.
Follow this tutorial CLOSELY, or you'll mess up your phone
WARNING: THIS POST IS DIVIDED IN TO PARTS, IF YOU'RE HERE FOR THE A20e ROOT GUIDE, PLEASE CLICK (Coming soon)
1.0: Preparing.
1. Get your firmware from Sammobile or other sites
Get the NEWEST firmware that is from YOUR COUNTRY.
2. Download and install samsung mobile drivers.
3. Download ODIN Flash tool.
1.1: Unlocking your bootloader.
From this point on, you are taking a risk. You will void your warranty if you continue, i cant stress this enough.
1. Open the settings app, and navigate to: Device Info>Software Information and press Build number 7 times in a row. You will now have access to the developer settings.
2. Navigate back to settings, scroll down and press on "Developer settings"
3. Now, you should see a button called "OEM Unlock". PRESSING THIS WILL WIPE ALL OF YOUR DATA. (Which is normal.)
4. Go through the inital setup, and dont enter your data YET. Dont turn on wifi aswell, since youre going to wipe your data again later.
5. Now, turn off your phone.
6. When your phone is turned off, hold the Volume UP and DOWN button, and plug in your USB-Type C cable.
7. Now, hold the volume UP button for 8 seconds, until the screen changes. Press the volume UP button afterwards. Your data will get wiped again.
8. Go through the initial setup AGAIN, connect to wifi, but DONT enter your google/samsung account data just yet.
You have now unlocked your bootloader.
1.2: Unpacking your boot image.
1. Once you have the firmware, extract it using 7-Zip (Or any other extraction program).
2. You should now have a file called "boot.img.lz4"
3. Download the LZ4 Program on Github.
4. -Extract the zip in any EMPTY folder.
-Put the "boot.img.lz4" into the folder.
-Open CMD. Navigate to the folder you extracted LZ4 into.
- use this command to extract it: "lz4.exe -d boot.img.lz4 boot.img
- Done, now put the "boot.img" to your phone storage.
1.3: Patching the boot image.
1. After you copied the "boot.img" to your phone storage, open magisk manager.
2. Now, select the Install button on the TOP. Press "Patch an image"
3. Select the "boot.img" file you copied from your PC.
4. Wait.
5. Done. Copy the "magisk_patched.img" file to your computer.
6. Convert the ".img" file into a ".tar" file.
2.0: Rooting: Flashing the .tar to your phone.
Follow closely.
1. Turn off your phone, and hold the volume UP and Power button at the same time. After you booted into the recovery, select "reboot into bootloader".
2. Open odin, and firstly go to "options" and untick "Auto reboot". Then, press the "AP" Slot, and select the "magisk_patched.tar" file.
3. Connect your USB Cable, and press "start".
4. it should now say "PASS"
2.1: Rooting
1. hold the volume DOWN and Power button for 7 seconds.
2. QUICKLY hold the volume UP and Power button
3. Select "Wipe data". Press yes.
3. Now, go through the initial setup. You can now enter your data, since we arent wiping our phone anymore.
3. Final Touches
1. Download Magisk Manager again. Open it, and it will install a zip. It will automatically restart.
2. Open magisk manager. If there is a GREEN tick on the top, Well done! You've made it!
You are done with rooting your phone! you can now leave, or continue if you want to play AR games.
Other: AR Compatibility
1. Open magisk manager, press the 3 lines on the top left, and select "downloads"
2. Search "ARCore"
3. Install it, and reset your phone.
4. Now, go to the play store and install "ARCore"
5. You have AR access! Download games like "FNaF AR" or anything else.
This guide will get updated every week.
anyone can confirm this'll work?
Chiryn said:
anyone can confirm this'll work?
Click to expand...
Click to collapse
I tried it, but it didn't work. I think I downloaded a bad firmware tho. I am going to try it now. Btw. if you want an easy firm download I highly recomend Frija v.1.3.0. - only easy, fast and WORKING (at least for me) firmware downloader.
I am stuck at odin saying NAND Write Start!!.
Could anyone help me?
This is my personal way on how I got to root my phone
WARNING: ROOTING WILL VOID WARRANTY (MEANING NO WARRANTY) AND WILL DELETE ALL DATA
You need around 2 hours to do this if you don't have experience with it!
Requirements:
Unlocked bootloader
Latest version of Odin 3.13.3
Your firmware CSC (go to settings > about phone > software information > Service provider software version and see the last 3 letters, that is your CSC)
A brain, patience, common sense, time, basic computer knowledge
Step 1: Download firmware from here, in the link change CNX to your CSC (3 letter thing mentioned in requirements)
Step 2: Extract your AP file from the firmware zip
Step 3: Patch your entire AP file with magisk, from your phone
Step 4: Move the patched AP file to your pc
Step 5: Click AP in ODIN and choose the patched file
Step 6: Close your phone, hold vol up and vol down and after 8 seconds, connect your USB into your phone, then open download mode by pressing the vol up key
Step 7: Disable auto reboot from options. Now press START on ODIN, wait till it says Pass!
Step 8: Re-download the magisk app used to patch the AP file, and follow the steps that magisk gives! (DO NOT RESTART YOUR PHONE BEFORE FINISHING WITH THIS STEP, YOU WILL HAVE TO FLASH ALL ORIGINAL FILES AGAIN)
Congratulations, you are now rooted!
Hello after successful rooting I'm having issues with Sim.It basically won't recognize Sims on both slots when device starts up it gives me message "IMEI (or MEID) is missing".Any ideas?I have removed all root/restored original firmware and relocked bootloader doesn't seem to work.
Not sure, I'm one of the noobs too, have you over clocked? Maybe it broke it.
Try erasing all data, and reinsert the SIM
Tried everything nothing works even flashing older firmwares doesn't help
Nope didn't overclock just rooted
Get it to a service, they will tell you the problem with the tray, did you root with my tutorial?
KASSINOs said:
This is my personal way on how I got to root my phone
WARNING: ROOTING WILL VOID WARRANTY (MEANING NO WARRANTY) AND WILL DELETE ALL DATA
You need around 2 hours to do this if you don't have experience with it!
Requirements:
Unlocked bootloader
Latest version of Odin 3.13.3
Your firmware CSC (go to settings > about phone > software information > Service provider software version and see the last 3 letters, that is your CSC)
A brain, patience, common sense, time, basic computer knowledge
Step 1: Download firmware from here, in the link change CNX to your CSC (3 letter thing mentioned in requirements)
Step 2: Extract your AP file from the firmware zip
Step 3: Patch your entire AP file with magisk, from your phone
Step 4: Move the patched AP file to your pc
Step 5: Click AP in ODIN and choose the patched file
Step 6: Close your phone, hold vol up and vol down and after 8 seconds, connect your USB into your phone, then open download mode by pressing the vol up key
Step 7: Disable auto reboot from options. Now press START on ODIN, wait till it says Pass!
Step 8: Re-download the magisk app used to patch the AP file, and follow the steps that magisk gives! (DO NOT RESTART YOUR PHONE BEFORE FINISHING WITH THIS STEP, YOU WILL HAVE TO FLASH ALL ORIGINAL FILES AGAIN)
Congratulations, you are now rooted!
Click to expand...
Click to collapse
My odin says pass but my phone isnt doing anything, what do i do?
patch the entire AP file, that should work, does it say pass after 3 seconds?