Zeki TB782B/TB1082B is using the Allwinner Chip A10.
I search in the web and found the Rom flash steps
Flash Tool LivesuitPack
http://hotfile.com/dl/136803097/cffe5ab/LiveSuitPack_v1.07_usb_drivers.rar.html
The flash ROM Demo video
http://www.youtube.com/watch?v=238RR-WvhrQ
You can get the Rom at below link
http://depositfiles.com/files/u7ew46yzm
FID HN TB1082B ROM
http://depositfiles.com/files/ay9hhvpyf
FID CF TB782B ROM
http://depositfiles.com/files/0wopipacg
FID BN TB1082B ROM
http://depositfiles.com/files/4uoxkwjc4
FIB BN TB782B ROM
1.Required files: Upgrade tool (Livesuit.exe)
2. Make sure your tablet is fully charged
3. Backup your data, device will be formatted during upgrade
4. The driver and upgrade software work for both Windows XP and Windows 7.
Upgrade Steps:
1. Unzip the upgrade tool and USB drive to your hard drive (recommend to put it in C:\ ).
Double-click the LiveSuitPack_v1.07.exe file, it will automatically install the driver files. Click “OK” to complete the driver installation.
2. Open Livesuit.exe
Double-click to open the upgrade tool LiveSuit.exe
3. Select the firmware
Click “No” to not choose the user upgrade wizard, and click the “Select Firmware” button (the first button from the left) to select the firmware .img file.
4. Turn off your tablet
Make sure the tablet is powered off (Turn it on, press the power button for more than 8 seconds to force power off)
5. Press the key combination to start it in the upgrade mode
a. Press and hold down the “Vol +”, button on TB782B,TB892B or “Home” button on TB1082B
b. Connect the USB cable to tablet and computer
c. After connecting the USB cable, press the power button 6 times quickly (you should get a popup window if done correctly, if not repeat step 5 from beginning)
d. DON’T release the “Vol+” button till the LiveSuit window pops up
e. You can now release the “Vol+” button
(Note: If you install the driver at this time the pop-up dialog box, the path to point to installation directory UsbDriver Livesuit folder, click Next to complete the driver installation prompts).
You should see Livesuit window pops up; otherwise, you didn’t do it correctly, you have to repeat step 4 and 5.
6. Select the format to force upgrade
Livesuit prompt “force format”, click “Yes” (Y). All of the original apps installed will be removed.
We highly recommend mandatory format! ! ! Otherwise the update is not complete and may brick! ! !
7. Upgrade begins
Pop-up “OK to force format” dialog box, select “Yes”, the upgrade begins:
8. The upgrade is complete
Firmware download process lasted about three and a half minutes or so, please wait until the prompt “upgrade successful.”
9. Automatic restart
After the upgrade is complete, your tablet will automatically restart, then you can unplug the USB cable.
Slow start-up time machine for the first time, please be patient.
If the machine does not restart automatically, press and hold the Power button for 8-10 seconds or more to ensure the power switch off, then press the Power button 3 seconds or more to turn on your tablet.
10. Congratulations! You have flashed the firmware.
you can get the Google Play at below link
http://forum.xda-developers.com/showthread.php?t=1621831
Do you have one for FID BN?
Sent from my GT-S5830 using xda app-developers app
Fid bn tb782b?
Need the ROM for FID BN TB782B, Can someone help so I can unbrick my Zeki 7? Thanks!
Thanks alot
I was searching for these ROM from along time. You saved my tablet.
in need of some help
Hello!
I bought 3 zeki tablets for my kids for xmas. I was able to follow another thread to put google play on them, and 2 of the 3 work great.
One of the tablets keeps freezing though. I did a factory reset, but in doing so, google play update stayed. So I found this thread and tried to follow the directions above.
Now I can't even get the tablet to turn on. :/
I am assuming it is something I did, and I am hoping that someone can help.
Thank you in advance!!
What's the FID shown on the back case.
Sent from my GT-N7000 using xda premium
Does this firmware add any new features? Also does the android version change?
Sent from my GT-S5830 using xda premium
Reflash the rom
Sent from my GT-N7000 using xda premium
All the rom is Andriod 4.04
Sent from my GT-N7000 using xda premium
Please help
cablepama said:
Zeki TB782B/TB1082B is using the Allwinner Chip A10.
I search in the web and found the Rom flash steps
Flash Tool LivesuitPack
http://hotfile.com/dl/136803097/cffe5ab/LiveSuitPack_v1.07_usb_drivers.rar.html
The flash ROM Demo video
http://www.youtube.com/watch?v=238RR-WvhrQ
You can get the Rom at below link
http://depositfiles.com/files/u7ew46yzm
FID HN TB1082B ROM
http://depositfiles.com/files/ay9hhvpyf
FID CF TB782B ROM
http://depositfiles.com/files/0wopipacg
FID BN TB1082B ROM
http://depositfiles.com/files/4uoxkwjc4
FIB BN TB782B ROM
1.Required files: Upgrade tool (Livesuit.exe)
2. Make sure your tablet is fully charged
3. Backup your data, device will be formatted during upgrade
4. The driver and upgrade software work for both Windows XP and Windows 7.
Upgrade Steps:
1. Unzip the upgrade tool and USB drive to your hard drive (recommend to put it in C:\ ).
Double-click the LiveSuitPack_v1.07.exe file, it will automatically install the driver files. Click “OK” to complete the driver installation.
2. Open Livesuit.exe
Double-click to open the upgrade tool LiveSuit.exe
3. Select the firmware
Click “No” to not choose the user upgrade wizard, and click the “Select Firmware” button (the first button from the left) to select the firmware .img file.
4. Turn off your tablet
Make sure the tablet is powered off (Turn it on, press the power button for more than 8 seconds to force power off)
5. Press the key combination to start it in the upgrade mode
a. Press and hold down the “Vol +”, button on TB782B,TB892B or “Home” button on TB1082B
b. Connect the USB cable to tablet and computer
c. After connecting the USB cable, press the power button 6 times quickly (you should get a popup window if done correctly, if not repeat step 5 from beginning)
d. DON’T release the “Vol+” button till the LiveSuit window pops up
e. You can now release the “Vol+” button
(Note: If you install the driver at this time the pop-up dialog box, the path to point to installation directory UsbDriver Livesuit folder, click Next to complete the driver installation prompts).
You should see Livesuit window pops up; otherwise, you didn’t do it correctly, you have to repeat step 4 and 5.
6. Select the format to force upgrade
Livesuit prompt “force format”, click “Yes” (Y). All of the original apps installed will be removed.
We highly recommend mandatory format! ! ! Otherwise the update is not complete and may brick! ! !
7. Upgrade begins
Pop-up “OK to force format” dialog box, select “Yes”, the upgrade begins:
8. The upgrade is complete
Firmware download process lasted about three and a half minutes or so, please wait until the prompt “upgrade successful.”
9. Automatic restart
After the upgrade is complete, your tablet will automatically restart, then you can unplug the USB cable.
Slow start-up time machine for the first time, please be patient.
If the machine does not restart automatically, press and hold the Power button for 8-10 seconds or more to ensure the power switch off, then press the Power button 3 seconds or more to turn on your tablet.
10. Congratulations! You have flashed the firmware.
you can get the Google Play at below link
http://forum.xda-developers.com/showthread.php?t=1621831
Click to expand...
Click to collapse
i cant install the driver
am formated the pc and also tried in another pc
please help me
Pratheesh T K said:
i cant install the driver
am formated the pc and also tried in another pc
please help me
Click to expand...
Click to collapse
I am in desperate need of a rom dump or even just the ft5x_ts.ko from a non 4.04 upgraded version of the Zeki TB 782B. If anyone reads this anymore and has one that has no been updated please send me a reply, I have found a way to repair ALL currupted FT5x touch panels but need an unmodified module to verify the process will work on other models as well.
Thanks.
i have the Zeki Quad Core 4.4.2 Android Tablet and i rooted it but now im looking for a custom recovery that supports my device can anyone help?
Link dead
This link is no longer work
Flash Tool LivesuitPack
http://hotfile.com/dl/136803097/cffe...ivers.rar.html
Dose anyone have new link that works or where I can find the tool
Not Working Getting Stuck @ 51%
cablepama said:
Zeki TB782B/TB1082B is using the Allwinner Chip A10.
I search in the web and found the Rom flash steps
Flash Tool LivesuitPack
http://hotfile.com/dl/136803097/cffe5ab/LiveSuitPack_v1.07_usb_drivers.rar.html
The flash ROM Demo video
http://www.youtube.com/watch?v=238RR-WvhrQ
You can get the Rom at below link
http://depositfiles.com/files/u7ew46yzm
FID HN TB1082B ROM
http://depositfiles.com/files/ay9hhvpyf
FID CF TB782B ROM
http://depositfiles.com/files/0wopipacg
FID BN TB1082B ROM
http://depositfiles.com/files/4uoxkwjc4
FIB BN TB782B ROM
1.Required files: Upgrade tool (Livesuit.exe)
2. Make sure your tablet is fully charged
3. Backup your data, device will be formatted during upgrade
4. The driver and upgrade software work for both Windows XP and Windows 7.
Upgrade Steps:
1. Unzip the upgrade tool and USB drive to your hard drive (recommend to put it in C:\ ).
Double-click the LiveSuitPack_v1.07.exe file, it will automatically install the driver files. Click “OK” to complete the driver installation.
2. Open Livesuit.exe
Double-click to open the upgrade tool LiveSuit.exe
3. Select the firmware
Click “No” to not choose the user upgrade wizard, and click the “Select Firmware” button (the first button from the left) to select the firmware .img file.
4. Turn off your tablet
Make sure the tablet is powered off (Turn it on, press the power button for more than 8 seconds to force power off)
5. Press the key combination to start it in the upgrade mode
a. Press and hold down the “Vol +”, button on TB782B,TB892B or “Home” button on TB1082B
b. Connect the USB cable to tablet and computer
c. After connecting the USB cable, press the power button 6 times quickly (you should get a popup window if done correctly, if not repeat step 5 from beginning)
d. DON’T release the “Vol+” button till the LiveSuit window pops up
e. You can now release the “Vol+” button
(Note: If you install the driver at this time the pop-up dialog box, the path to point to installation directory UsbDriver Livesuit folder, click Next to complete the driver installation prompts).
You should see Livesuit window pops up; otherwise, you didn’t do it correctly, you have to repeat step 4 and 5.
6. Select the format to force upgrade
Livesuit prompt “force format”, click “Yes” (Y). All of the original apps installed will be removed.
We highly recommend mandatory format! ! ! Otherwise the update is not complete and may brick! ! !
7. Upgrade begins
Pop-up “OK to force format” dialog box, select “Yes”, the upgrade begins:
8. The upgrade is complete
Firmware download process lasted about three and a half minutes or so, please wait until the prompt “upgrade successful.”
9. Automatic restart
After the upgrade is complete, your tablet will automatically restart, then you can unplug the USB cable.
Slow start-up time machine for the first time, please be patient.
If the machine does not restart automatically, press and hold the Power button for 8-10 seconds or more to ensure the power switch off, then press the Power button 3 seconds or more to turn on your tablet.
10. Congratulations! You have flashed the firmware.
you can get the Google Play at below link
http://forum.xda-developers.com/showthread.php?t=1621831
Click to expand...
Click to collapse
I have run the Livesuite and it appears to not work and I have been stuck for quite sometime. I need some help with getting a proper working image I was going to try to use:
FID BN TB1082B ROM
http://depositfiles.com/files/4uoxkwjc4
but the link is no longer active and would I haven't been able to use my tablet the other link is where it get stuck at 51% when trying to transfer the image
http://depositfiles.com/files/ay9hhvpyf
FID CF TB782B ROM
from this one and always gets stuck in the loading process of 51%
any other help with a link to the original image would be greatly appreciated. Thank you in advance!
Cautions:
1.your warranty is now void.
2.do this at your own risk.
3.read the whole post before starting.
Flashing CWM recovery and taking backup :
1. Download the package and extract all files.
2. Extract the driver.zip located in drivers folder->1
3. Install the driver.if your OS is 64bit then install the x64 one.if the OS is 32bit,then the x86 one.
4. Open researchdownload application
5. Select the 2nd button with double cog sign.
6. Now a new window will appear like the screenshot attached.
7. Right click on the file name field.choose the files located in "Required files" folder of the package.
be careful here.Put fdl1 in fdl1 field,fdl2 in 2nd field and the recovery image(extract the "CWM-recovery-SC8810-nonpadded.zip") in recovery field. Then press the "OK" button.
8. Press the Start (Play) button in ResearchDownload -application (third button).
9. Turn off the phone.
10. Keep holding the "- volume" key. Without releasing the button "- volume" plug the usb cable
11. The process of CWM- burning should be started now in ResearchDownload-application and it will take approximately 1 Minute.
I think you can release the Vol.Button, but I had kept it nevertheless.
12. Wait until the CWM-flashing has been finished (A green sign will appeare and "Passed" will be shown in ResearchDownload- application window).
13. Remove the battery, wait 20 seconds. Put battery back and turn on the phone.
14. now hold the vol (-) and power button until the screen flashes (40 seconds or less or more) and now you are in the CWM recovery menu.
15. PLEASE make a full backup by the "backup and restore" option .make sure there's about 500mb free space in your micro SD card.
16. after the backup reboot the phone and PLEASE store the backup files in somewhere else..(the whole ''clockworkmod'' folder)
congratulation. you have done a full backup and flashed your CWM recovery.
Rooting device:
*don't do this.if u find that your backup size is lower than 250mb~300mb(slight +/- may occur)
1. download and put the "superuserandfullbackup.zip" in your micro SD card
2. power off your device.
2. Reboot to Recovery by holding volume (-) and power button until the screen flashes and recovery menu comes.
3. just go to "install zip from sdcard option and select the zip "superuserandfullbackup.zip"
4. flash it
5. reboot.
Advices:
Rooting is dangerous.so first make a full backup of your unrooted stock Rom just after flashing CWM.
Store the backup(size will be around 250mb~300mb(+/- ) in someplace safe.it's the life of your phone.If anything goes wrong,it's the only key to fix your phone.......be careful.........
Getting back your warranty:
Restore your stock Rom's backup.Then,flash the stock recovery(included in the package.find it in RECOVERIES folder),in the same way you've flashed the CWM.
good luck.and thanks for reading this.
***Disclaimer: I am not to held responsible if you somehow manage to brick, boot loop, or mess up your device in any way. If you correctly follow the instructions I've given you should not have these issues. Please keep in mind that you are the one choosing to make these changes to your phone, not me or anyone else.***
IMPORTANT! This will only work on this version of the phone! DO NOT try it on any other variant!
Instructions:
1: Plug your phone into your computer with the USB cable
2: Power your phone off
3: Hold the Volume Down, Home, and Power buttons until the phone asks if you want to enter download mode, then let go of the power button
4: Press Volume Up to enter download mode
5: Download the CF-Auto-Root file from My Drive below
6: Download Odin from My Drive
7: Unzip the root file into a folder and run Odin
8: Once Odin loads up click on "AP" and go to where you extracted the root file to, then choose "CF-Auto-Root-coreprimespr-smg360p.tar.md5
9: The file will pass verification
10: Click "Start" Warning! DO NOT unplug your phone while it's in the middle of downloading the file from your computer!
11: Your phone will reboot about three times after it's done. Don't worry, this is normal. After your phone boots you'll see that SuperSu is installed.
Downloads:
CF-Auto-Root: https://drive.google.com/open?id=0B-tlk6kNn789V2U2UzZDNW5sejg
Odin v3.12.3: https://drive.google.com/file/d/0B-tlk6kNn789bjVCejZ0aHBrc0k/view?usp=sharing
I finally succeeded it, after literally months of trial and error! So, I am writing this post in hope that someone who wants to install Oreo on Life One X in the future would find this post through Google search.
Here are the steps.
0. From this page (https://forum.xda-developers.com/android/development/rom-official-mados-wiko-fever-clones-t3762800), download the TWRP recovery and the madOS Oreo ROM.
1. Download the BLUEFEVER ROM from this page (https://www.npcglib.org/~stathis/blog/2016/04/13/turned-blu-life-one-x-wiko-fever-4g/).
2. Download the SP Flash Tool from the page above or through Google search. The version I used was 5.1812, which seemed to be the latest version.
3. Download the Universal ROM from this page (https://forum.xda-developers.com/android/development/flashable-wiko-fever-stock-marshmallow-t3720484)
4. The critical things is you should not flash the Universal ROM as it is, because that bricked my One X. You need to copy "preloader_l5460.bin" and "secro.img" from BLUEFEVER in step 1 and overwrite them to the Universal ROM.
5. You need to install the Mediatek Driver. I used "MT65XX USB VCOM" driver. I found it using Google search, but forgot where I got it from. But with that name, I think you can find it.
6. Now start the Flash Tool, and and select the download agent in the Flash Tool directory (MTK_AllInOne_DA.bin), and select the scatter file in the Universal rom (MMX BLU), and then select "Format all + Download". Then, this is very important, press the download button BEFORE connecting the phone, otherwise it will not work.
7. Now, turn off the phone (I mean, power off, not just screen off) and then connect it to the PC. If the tool does not recognise the phone, press volume up + down at the same time when you connect it until the device connected sound comes from Windows.
8. Now the tool flashs the rom. Wait. It may take a few minutes.
9. If it is bricked, just leave it for a month until the battery drains and completely turns off, and then try flashing again.
10. Now, boot up the phone, go to Settings -> About and hit the build number several times to enable the developer menu.
11. In the developer menu, enable OEM unlocking.
12. Now, install the Google USB Driver. This can be easily found through a Google search. You need to get the "platform-tools" directory of the Android SDK, which can also be easily found.
13. Now, turn off the phone, and hold volume up + power button. The phone shows tiny menu (really tiny...). The first is recovery, the second is fast boot, and the third is normal. Choose fast boot. Type "fastboot oem unlock". You need to press the volume up button on the phone now.
14. Now the phone is unlocked. Type "fastboot.exe flash recovery twrp_wiko_fever_oreo.img" to flash the recovery.
15. Restart in the recovery using the 13th step.
16. Go to Wipe -> Format data and format the data, otherwise the recovery will not recognise the storage and will not boot.
17. Go to Open Gapps and get ARM64, 8.1, micro. Editions above micro will NOT install with an error message that says insufficient storage.
18. Now connect the phone to the PC. The TWRP recovery automatically mounts the storage to the PC so that you can copy files into it. Copy the mad OS rom ZIP from step 0 and the OpenGapps from step 17.
19. Flash the two using the install menu of TWRP.
20. Done.
I do not use One X as a phone, so I skipped the radio flashing steps. It currently shows the baseband is unknown. If you want to use the phone feature, I think you need to flash the radio img or something using the instructions somewhere in the linked posts.
Find here SP Flash Tool
THIS WILL VOID YOUR WARRANTY OR MAY BRICK YOUR PHONE IF NOT DONE CORRECTLY.
I made this because i wanted to play AR games on an unsupported phone, so i want to help other people.
Follow this tutorial CLOSELY, or you'll mess up your phone
WARNING: THIS POST IS DIVIDED IN TO PARTS, IF YOU'RE HERE FOR THE A20e ROOT GUIDE, PLEASE CLICK (Coming soon)
1.0: Preparing.
1. Get your firmware from Sammobile or other sites
Get the NEWEST firmware that is from YOUR COUNTRY.
2. Download and install samsung mobile drivers.
3. Download ODIN Flash tool.
1.1: Unlocking your bootloader.
From this point on, you are taking a risk. You will void your warranty if you continue, i cant stress this enough.
1. Open the settings app, and navigate to: Device Info>Software Information and press Build number 7 times in a row. You will now have access to the developer settings.
2. Navigate back to settings, scroll down and press on "Developer settings"
3. Now, you should see a button called "OEM Unlock". PRESSING THIS WILL WIPE ALL OF YOUR DATA. (Which is normal.)
4. Go through the inital setup, and dont enter your data YET. Dont turn on wifi aswell, since youre going to wipe your data again later.
5. Now, turn off your phone.
6. When your phone is turned off, hold the Volume UP and DOWN button, and plug in your USB-Type C cable.
7. Now, hold the volume UP button for 8 seconds, until the screen changes. Press the volume UP button afterwards. Your data will get wiped again.
8. Go through the initial setup AGAIN, connect to wifi, but DONT enter your google/samsung account data just yet.
You have now unlocked your bootloader.
1.2: Unpacking your boot image.
1. Once you have the firmware, extract it using 7-Zip (Or any other extraction program).
2. You should now have a file called "boot.img.lz4"
3. Download the LZ4 Program on Github.
4. -Extract the zip in any EMPTY folder.
-Put the "boot.img.lz4" into the folder.
-Open CMD. Navigate to the folder you extracted LZ4 into.
- use this command to extract it: "lz4.exe -d boot.img.lz4 boot.img
- Done, now put the "boot.img" to your phone storage.
1.3: Patching the boot image.
1. After you copied the "boot.img" to your phone storage, open magisk manager.
2. Now, select the Install button on the TOP. Press "Patch an image"
3. Select the "boot.img" file you copied from your PC.
4. Wait.
5. Done. Copy the "magisk_patched.img" file to your computer.
6. Convert the ".img" file into a ".tar" file.
2.0: Rooting: Flashing the .tar to your phone.
Follow closely.
1. Turn off your phone, and hold the volume UP and Power button at the same time. After you booted into the recovery, select "reboot into bootloader".
2. Open odin, and firstly go to "options" and untick "Auto reboot". Then, press the "AP" Slot, and select the "magisk_patched.tar" file.
3. Connect your USB Cable, and press "start".
4. it should now say "PASS"
2.1: Rooting
1. hold the volume DOWN and Power button for 7 seconds.
2. QUICKLY hold the volume UP and Power button
3. Select "Wipe data". Press yes.
3. Now, go through the initial setup. You can now enter your data, since we arent wiping our phone anymore.
3. Final Touches
1. Download Magisk Manager again. Open it, and it will install a zip. It will automatically restart.
2. Open magisk manager. If there is a GREEN tick on the top, Well done! You've made it!
You are done with rooting your phone! you can now leave, or continue if you want to play AR games.
Other: AR Compatibility
1. Open magisk manager, press the 3 lines on the top left, and select "downloads"
2. Search "ARCore"
3. Install it, and reset your phone.
4. Now, go to the play store and install "ARCore"
5. You have AR access! Download games like "FNaF AR" or anything else.
This guide will get updated every week.
anyone can confirm this'll work?
Chiryn said:
anyone can confirm this'll work?
Click to expand...
Click to collapse
I tried it, but it didn't work. I think I downloaded a bad firmware tho. I am going to try it now. Btw. if you want an easy firm download I highly recomend Frija v.1.3.0. - only easy, fast and WORKING (at least for me) firmware downloader.
I am stuck at odin saying NAND Write Start!!.
Could anyone help me?