I have a developers phone that i am trying to update to 1.5 and am stuck on getting the ver updated.
As i am a new user to linux and have a ubuntu machine plus trying to learn these new programs am stuck.
i have tried a search on the net and tring to follow htc website fail on unloading the software as i am not sure which of the files to unload.
i tried this link
http://groups.google.com/group/Android-DevPhone-Updating/browse_thread/thread/d2970dd43f51d96c
when adding the updaew.zip file found the phone froze and on completion had to take out batterys to reboot.
still the files remain unchanged
baseband ver
62.33.20.08h_1.22.12.29
kernel ver2.6.25-01843-afea2660
[email protected]#6
build number
dream devphone-userdebug 1.0 unlocked 116222 test keys
i guess the way forward for me is a step by step upgrde that is relevant to my linux machine or find one for a windows machine as i have access to windows pc also.
thanks Vinny
1) download the recovery image from htc's website.
2) plug your phone into your USB.
3) copy the recovery image to the root of the USB drive as "update.zip".
4) unmount usb disk and wait for it to sync.
5) unplug usb cable
6) plug in charger (optional, make sure you have a full battery)
7) reboot holding the "home" key.
8) press "alt + L"
9) press "alt + S"
10) wait for it to do its thing.
11) press "home + back".
Done.
Hi,
I have 2 tablet onda v712 v2. When i try to flash the firmware one of them work succesful and now it's with OS android 4.1.1.
In the another one, in the moment i try to flash i thank that the tablet freeze because the white android robot don't dissappear in a short time (10 secs) y i try to turn off the tablet. So, since i did this, i can't turn on or reflash the tablet again. Please help me.
I try to download PCTool_SPI-1010.rar because i read in another forums (http://forum.xda-developers.com/showthread.php?t=1921691 ) that flash with this program would help with this, but this software don´t exist anymore (http://translate.google.com/transla....php?mod=viewthread&tid=170862&fromuid=211902 ).
Here i post the instructions for flash to 4.1.1:
First of all, back up your programs and configuration, because this firmware format your tablet.
1. Go to http://translate.google.cl/translat...ev=_t&hl=es&ie=UTF-8&eotf=1&u=onda.cn&act=url and download V712 the double nuclear the version-V2_v2.0 version firmware (applies only to models of V2 version)
2. Decompress and copy to root of sd card all files
3. Turn Off your tablet
4. Insert the sd in tablet
5. press and keep the home button pressed
6. press the power button and keep until white andorid robot appears
7. release home button
8. wait (don't turn off, if not you have the same problem that i)
9. a green android robot apears. Wait.
10. The tablet automatically turn off and automatically turn on, and voila, you have android 4.1.1.
11. First problem: Chineese language. but it's easy to change. (Go to settings, go to red cloud icon in left menu, in right menu select the first option and select your language)
Help me please with my problem!!!!!!
Hi,
I have 2 tablet onda v712 v2. When i try to flash the firmware one of them work succesful and now it's with OS android 4.1.1.
In the another one, in the moment i try to flash i thank that the tablet freeze because the white android robot don't dissappear in a short time (10 secs) y i try to turn off the tablet. So, since i did this, i can't turn on or reflash the tablet again. Please help me.
I try to download PCTool_SPI-1010.rar because i read in another forums (http://forum.xda-developers.com/show....php?t=1921691 ) that flash with this program would help with this, but this software don´t exist anymore (http://translate.google.com/translat...omuid=211902 ).
Here i post the instructions for flash to 4.1.1:
First of all, back up your programs and configuration, because this firmware format your tablet.
1. Go to http://translate.google.cl/translate...nda.cn&act=url and download V712 the double nuclear the version-V2_v2.0 version firmware (applies only to models of V2 version)
2. Decompress and copy to root of sd card all files
3. Turn Off your tablet
4. Insert the sd in tablet
5. press and keep the home button pressed
6. press the power button and keep until white andorid robot appears
7. release home button
8. wait (don't turn off, if not you have the same problem that i)
9. a green android robot apears. Wait.
10. The tablet automatically turn off and automatically turn on, and voila, you have android 4.1.1.
11. First problem: Chineese language. but it's easy to change. (Go to settings, go to red cloud icon in left menu, in right menu select the first option and select your language)
Help me please with my problem!!!!!!
netinhodj said:
Hi,
I have 2 tablet onda v712 v2. When i try to flash the firmware one of them work succesful and now it's with OS android 4.1.1.
In the another one, in the moment i try to flash i thank that the tablet freeze because the white android robot don't dissappear in a short time (10 secs) y i try to turn off the tablet. So, since i did this, i can't turn on or reflash the tablet again. Please help me.
I try to download PCTool_SPI-1010.rar because i read in another forums (http://forum.xda-developers.com/show....php?t=1921691 ) that flash with this program would help with this, but this software don´t exist anymore (http://translate.google.com/translat...omuid=211902 ).
Here i post the instructions for flash to 4.1.1:
First of all, back up your programs and configuration, because this firmware format your tablet.
1. Go to http://translate.google.cl/translate...nda.cn&act=url and download V712 the double nuclear the version-V2_v2.0 version firmware (applies only to models of V2 version)
2. Decompress and copy to root of sd card all files
3. Turn Off your tablet
4. Insert the sd in tablet
5. press and keep the home button pressed
6. press the power button and keep until white andorid robot appears
7. release home button
8. wait (don't turn off, if not you have the same problem that i)
9. a green android robot apears. Wait.
10. The tablet automatically turn off and automatically turn on, and voila, you have android 4.1.1.
11. First problem: Chineese language. but it's easy to change. (Go to settings, go to red cloud icon in left menu, in right menu select the first option and select your language)
Help me please with my problem!!!!!!
Click to expand...
Click to collapse
Any news?
First, I would like to thank Pogodancer in millions for his STEP by STEP tutorial which helped me to load STOCK ROM on my CUBOT C7 chinese phone. I am sure this tutorial will help others to fix their CUBOT C7 phone. This tutorial is also good for PHONES with SpreadTrum SP6820 on Android 2.3.6/4.0.1 . (Make sure you have the right STOCK ROM for your phone).
Here is the link to Pogodancer's original Post:
http://forum.xda-developers.com/showthread.php?t=2018023&page=2
HOW TO LOAD STOCK ROM ON YOUR CUBOT C7:
WARNING: YOU ARE DOING THIS PROCESS ON YOUR OWN AND I DO NOT TAKE ANY RESPONSIBILITY IF
SOMETHING GOES WRONG WITH YOUR PHONE. YOU ARE FULLY RESPONSIBLE DOING THIS PROCEDURE.
1) Download the CUBOT C7 Stock rom from here:
Stock Rom: www.cubot.net/UploadFile/Soft/C7_root_Software.rar ------ (After downloading the file EXTRACT or UNZIP it)
Here you can find other tools for CUBOT C7 - http://www.cubot.net/Service.aspx (NOTE: This is not required)
2) Download this package it has the USB Driver and Flashing Tools. Install USB Driver...
http://www55.zippyshare.com/v/44295424/file.html
3) Be sure to have installed the correct drivers. For my SC6820-device I see 5 items in Win7-32bit-device-manager (ADB-Composite, 2 x
COM-ports, 2 x USB devices: all without exclamation marks). You can use the drivers from the package folder "SCI-android-usb-driver-jungo-
v4-.rar".
4) Disable just in case your Win7 firewall. (If you are using Windows XP, you don't have to do this step)
5) Launch "ChannelServer.exe" from package folder "CHANNELSERVER" and allow firewall if asked.
6) Start "ResearchDownload.exe" from package folder "ResearchDownload".
7) In ResearchDownload-application chose firmware with first button (for me: 20121006_c909_JF_EAHC_V12.PAC).----- This is the STOCK
ROM file that you have downloaded and Extracted it on STEP 1.
8) Be sure to SET the Baudrate-settings in ResearchDownload-Settings (second button). I recommend 115200.
9) Press the Start (Play) button in ResearchDownload-application (third button).
10) Turn off the phone.
11) Keep holding the "volume down"-key.
12) Without releasing the button "volume down" plug the usb-cord from phone to your PC (install the driver if not done before in step 2).
13) Keep holding down the Volume Down button..... The process of firmware-burning should start now in ResearchDownload-application and
take approximately 1 Minute.
11. Wait until the firmware-flashing has been finished (A green sign appeares + "Passed" is written in ResearchDownload-application).
12. Remove the battery, wait 20 seconds. Put battery back and turn on the phone (first boot may take a while but not more than 5 minutes).
Use this at your own risk.
No cigar on Cubot C7
Tried, but did not work on Win7 64. Drivers install but Windows says the device would not run because signature is too old.
:crying:
z_man3007 said:
First, I would like to thank Pogodancer in millions for his STEP by STEP tutorial which helped me to load STOCK ROM on my CUBOT C7 chinese phone. I am sure this tutorial will help others to fix their CUBOT C7 phone. This tutorial is also good for PHONES with SpreadTrum SP6820 on Android 2.3.6/4.0.1 . (Make sure you have the right STOCK ROM for your phone).
Here is the link to Pogodancer's original Post:
http://forum.xda-developers.com/showthread.php?t=2018023&page=2
HOW TO LOAD STOCK ROM ON YOUR CUBOT C7:
WARNING: YOU ARE DOING THIS PROCESS ON YOUR OWN AND I DO NOT TAKE ANY RESPONSIBILITY IF
SOMETHING GOES WRONG WITH YOUR PHONE. YOU ARE FULLY RESPONSIBLE DOING THIS PROCEDURE.
1) Download the CUBOT C7 Stock rom from here:
Stock Rom: www.cubot.net/UploadFile/Soft/C7_root_Software.rar ------ (After downloading the file EXTRACT or UNZIP it)
Here you can find other tools for CUBOT C7 - http://www.cubot.net/Service.aspx (NOTE: This is not required)
2) Download this package it has the USB Driver and Flashing Tools. Install USB Driver...
http://www55.zippyshare.com/v/44295424/file.html
3) Be sure to have installed the correct drivers. For my SC6820-device I see 5 items in Win7-32bit-device-manager (ADB-Composite, 2 x
COM-ports, 2 x USB devices: all without exclamation marks). You can use the drivers from the package folder "SCI-android-usb-driver-jungo-
v4-.rar".
4) Disable just in case your Win7 firewall. (If you are using Windows XP, you don't have to do this step)
5) Launch "ChannelServer.exe" from package folder "CHANNELSERVER" and allow firewall if asked.
6) Start "ResearchDownload.exe" from package folder "ResearchDownload".
7) In ResearchDownload-application chose firmware with first button (for me: 20121006_c909_JF_EAHC_V12.PAC).----- This is the STOCK
ROM file that you have downloaded and Extracted it on STEP 1.
8) Be sure to SET the Baudrate-settings in ResearchDownload-Settings (second button). I recommend 115200.
9) Press the Start (Play) button in ResearchDownload-application (third button).
10) Turn off the phone.
11) Keep holding the "volume down"-key.
12) Without releasing the button "volume down" plug the usb-cord from phone to your PC (install the driver if not done before in step 2).
13) Keep holding down the Volume Down button..... The process of firmware-burning should start now in ResearchDownload-application and
take approximately 1 Minute.
11. Wait until the firmware-flashing has been finished (A green sign appeares + "Passed" is written in ResearchDownload-application).
12. Remove the battery, wait 20 seconds. Put battery back and turn on the phone (first boot may take a while but not more than 5 minutes).
Use this at your own risk.
Click to expand...
Click to collapse
Cubot C7
kostar said:
Tried, but did not work on Win7 64. Drivers install but Windows says the device would not run because signature is too old.
:crying:
Click to expand...
Click to collapse
Have you tried downloading the 64-bit driver from cubot dot net webside?. Here is the link
Darn, I cant post a link here.... go to cubot dot net website and click on services and download C7 USB Driver.
Once you download the file. Extract it and in there you will find X64 and X86 Folder. Use the drivers from X64 folder cause you are using 64-bit Windows 7.
Cant download the "C7_root_software.rar"
Ok so i just followed another tutorial on how to root the Cubot and unfortunatelz the telephone is stuck on bootcycle for whatever reason. I believe I didnt delete any critical application, but hey ... simply wont boot up.
Now I cant download the C7_root_software from the cubot-net website. Could anyone please upload the software somewhere else so I could download it and load stock ROM on my device. Would be a great help for me.
Thanks in advance to all of those concerned.
Worked
Hello guyz, an update after 2 hours. I did successfully load stock ROM on Cubot C7 from ebay. Exactly like the tutorial says. Thanks for the tutorial.
I just thought that as the download from cubot net is reaaaallly slow and I have even requested the ROM myself others may have the same problem so here you go a mega key for the files
C7_root_software: Hp2f3lp-UerqPjPs2pUu-jgzruFj59Dtz0B5ScLZSGE
Debug_Tool: ByLnzD1Q7XgPALRoYx35GnEnyIcsX_oIMCLlMyRSY7w
I cant post links and those are file keys to download from Mega.co.nz, simply search for "download from mega with file key".
Thanks for the tutorial and see you around.
CUBOT C7 - How to root
pijemcolu said:
Ok so i just followed another tutorial on how to root the Cubot and unfortunatelz the telephone is stuck on bootcycle for whatever reason. I believe I didnt delete any critical application, but hey ... simply wont boot up.
Now I cant download the C7_root_software from the cubot-net website. Could anyone please upload the software somewhere else so I could download it and load stock ROM on my device. Would be a great help for me.
Thanks in advance to all of those concerned.
Click to expand...
Click to collapse
The easiest way to root Cubot C7 is using Z4Root.apk tool. Download the pack from the web and copy over to your phones internal storage.
Here are the steps:
1) Install the Z4Root on your phone.
2) Run Z4Root on your phone.
3) First, run Temporary Root, You will see Superuser icon if it ran successfully.
4) Run Z4Root again and this time Run Permanent Root. You phone will boot and you will have your phone permanently rooted.
Thanks
Thank you so much for your help, follow the guide, all worked great, download was abit slow but I didn't worry about that knowing this is the only god dam tutrial I can find, thanks so much, had to register to make this post.
Thanks for the stock rom.I am now currently making a custom rom for the CUBOT C7
CUBOT C7
In case, anyone having trouble downloading the CUBOT C7 STOCK rom please download it from the following link. Thanks
https://mega.co.nz/#!5A1zURIK!BI-fQWVttxOcSDRd4jMTuzwl7xFcyxP9463-lq9GmqU
It's not working
Hello everyone,i did it just like above said,but it doesn't do anything,like the channel server is not connecting,and also the research download is not doing anything.
The drivers are installed,only a yellow triangle with information like signature,is there anyway to do something about it?
Windows 7 64bit,cubot c7 Android 2.3.9.
Now the reason is for the upgrading is that i have two issues,one with the signal is not wel,like cutting voice,from the mic of the phone,when talking through the phone but with the earphones it's much beter.second is that the bluetooth headset is only working for transfering audio like music to the BT earphone,and when talk to the phone i cannot hear or other people cannot hear me at all,it;s like muted the phone!!!!
Any one know about it,i cannot find anything here.
n.b.:tried 3 BT earphones
Also i see when i have a usim in the phone,it's like that there is 3G system!
Anybody?
Hello,i'm searching on the forum+net,but i cannot load again the update.zip from the site because there is no recovery option after install stock rom !Maybe someone has a solution for this?
Update the update.zip
gvanels said:
Hello everyone,i did it just like above said,but it doesn't do anything,like the channel server is not connecting,and also the research download is not doing anything.
The drivers are installed,only a yellow triangle with information like signature,is there anyway to do something about it?
Windows 7 64bit,cubot c7 Android 2.3.9.
Now the reason is for the upgrading is that i have two issues,one with the signal is not wel,like cutting voice,from the mic of the phone,when talking through the phone but with the earphones it's much beter.second is that the bluetooth headset is only working for transfering audio like music to the BT earphone,and when talk to the phone i cannot hear or other people cannot hear me at all,it;s like muted the phone!!!!
Any one know about it,i cannot find anything here.
n.b.:tried 3 BT earphones
Also i see when i have a usim in the phone,it's like that there is 3G system!
Click to expand...
Click to collapse
So after searching i did it!BUT in order to fix things(only fixed BT audio)there are many things that i don't can do....like a sync only apps,and after an restart i must put again a code,or the memory is out,and ofcourse no recovery menu,and other minor issues,How can i restore the rom that there is on there site/support.Maybe someone knows how to update the update.zip without recovery menu?
Thank you, on the very detailed,
Help please
Hello, I have a T999 dual sim (looks like a Xperia) it has sp6820a with 650mhz, Do you think I can use this ROM?
Please help me with this, I just kill a fake S3 i9300+ to follow another instructions.
Thank you so much from Argentina
QUOTE=z_man3007;37987768]First, I would like to thank Pogodancer in millions for his STEP by STEP tutorial which helped me to load STOCK ROM on my CUBOT C7 chinese phone. I am sure this tutorial will help others to fix their CUBOT C7 phone. This tutorial is also good for PHONES with SpreadTrum SP6820 on Android 2.3.6/4.0.1 . (Make sure you have the right STOCK ROM for your phone).
Here is the link to Pogodancer's original Post:
http://forum.xda-developers.com/showthread.php?t=2018023&page=2
HOW TO LOAD STOCK ROM ON YOUR CUBOT C7:
WARNING: YOU ARE DOING THIS PROCESS ON YOUR OWN AND I DO NOT TAKE ANY RESPONSIBILITY IF
SOMETHING GOES WRONG WITH YOUR PHONE. YOU ARE FULLY RESPONSIBLE DOING THIS PROCEDURE.
1) Download the CUBOT C7 Stock rom from here:
Stock Rom: www.cubot.net/UploadFile/Soft/C7_root_Software.rar ------ (After downloading the file EXTRACT or UNZIP it)
Here you can find other tools for CUBOT C7 - http://www.cubot.net/Service.aspx (NOTE: This is not required)
2) Download this package it has the USB Driver and Flashing Tools. Install USB Driver...
http://www55.zippyshare.com/v/44295424/file.html
3) Be sure to have installed the correct drivers. For my SC6820-device I see 5 items in Win7-32bit-device-manager (ADB-Composite, 2 x
COM-ports, 2 x USB devices: all without exclamation marks). You can use the drivers from the package folder "SCI-android-usb-driver-jungo-
v4-.rar".
4) Disable just in case your Win7 firewall. (If you are using Windows XP, you don't have to do this step)
5) Launch "ChannelServer.exe" from package folder "CHANNELSERVER" and allow firewall if asked.
6) Start "ResearchDownload.exe" from package folder "ResearchDownload".
7) In ResearchDownload-application chose firmware with first button (for me: 20121006_c909_JF_EAHC_V12.PAC).----- This is the STOCK
ROM file that you have downloaded and Extracted it on STEP 1.
8) Be sure to SET the Baudrate-settings in ResearchDownload-Settings (second button). I recommend 115200.
9) Press the Start (Play) button in ResearchDownload-application (third button).
10) Turn off the phone.
11) Keep holding the "volume down"-key.
12) Without releasing the button "volume down" plug the usb-cord from phone to your PC (install the driver if not done before in step 2).
13) Keep holding down the Volume Down button..... The process of firmware-burning should start now in ResearchDownload-application and
take approximately 1 Minute.
11. Wait until the firmware-flashing has been finished (A green sign appeares + "Passed" is written in ResearchDownload-application).
12. Remove the battery, wait 20 seconds. Put battery back and turn on the phone (first boot may take a while but not more than 5 minutes).
Use this at your own risk.[/QUOTE]
t9500-b
z_man3007 said:
First, I would like to thank Pogodancer in millions for his STEP by STEP tutorial which helped me to load STOCK ROM on my CUBOT C7 chinese phone. I am sure this tutorial will help others to fix their CUBOT C7 phone. This tutorial is also good for PHONES with SpreadTrum SP6820 on Android 2.3.6/4.0.1 . (Make sure you have the right STOCK ROM for your phone).
Here is the link to Pogodancer's original Post:
http://forum.xda-developers.com/showthread.php?t=2018023&page=2
HOW TO LOAD STOCK ROM ON YOUR CUBOT C7:
WARNING: YOU ARE DOING THIS PROCESS ON YOUR OWN AND I DO NOT TAKE ANY RESPONSIBILITY IF
SOMETHING GOES WRONG WITH YOUR PHONE. YOU ARE FULLY RESPONSIBLE DOING THIS PROCEDURE.
1) Download the CUBOT C7 Stock rom from here:
Stock Rom: www.cubot.net/UploadFile/Soft/C7_root_Software.rar ------ (After downloading the file EXTRACT or UNZIP it)
Here you can find other tools for CUBOT C7 - http://www.cubot.net/Service.aspx (NOTE: This is not required)
2) Download this package it has the USB Driver and Flashing Tools. Install USB Driver...
http://www55.zippyshare.com/v/44295424/file.html
3) Be sure to have installed the correct drivers. For my SC6820-device I see 5 items in Win7-32bit-device-manager (ADB-Composite, 2 x
COM-ports, 2 x USB devices: all without exclamation marks). You can use the drivers from the package folder "SCI-android-usb-driver-jungo-
v4-.rar".
4) Disable just in case your Win7 firewall. (If you are using Windows XP, you don't have to do this step)
5) Launch "ChannelServer.exe" from package folder "CHANNELSERVER" and allow firewall if asked.
6) Start "ResearchDownload.exe" from package folder "ResearchDownload".
7) In ResearchDownload-application chose firmware with first button (for me: 20121006_c909_JF_EAHC_V12.PAC).----- This is the STOCK
ROM file that you have downloaded and Extracted it on STEP 1.
8) Be sure to SET the Baudrate-settings in ResearchDownload-Settings (second button). I recommend 115200.
9) Press the Start (Play) button in ResearchDownload-application (third button).
10) Turn off the phone.
11) Keep holding the "volume down"-key.
12) Without releasing the button "volume down" plug the usb-cord from phone to your PC (install the driver if not done before in step 2).
13) Keep holding down the Volume Down button..... The process of firmware-burning should start now in ResearchDownload-application and
take approximately 1 Minute.
11. Wait until the firmware-flashing has been finished (A green sign appeares + "Passed" is written in ResearchDownload-application).
12. Remove the battery, wait 20 seconds. Put battery back and turn on the phone (first boot may take a while but not more than 5 minutes).
Use this at your own risk.
Click to expand...
Click to collapse
hello, this firware works whit t9500-b ??
Hi has anyone the firmware of cubot c7 ....
Captiva 10 Inch Tablet
Modell CAPTIVA PAD 10
Android: 4.1.1
Kernel Version: 3.0.8+ [email protected] #29
Build-Number: RK30_ANDROID4.1.1-SDK-v1.00.00
ruifu_V2.60.20121105.dc72a7b
Well i did a dump from the Captiva 10 Inch Tablet. We had two, one died so we did a dump from the working one and put it back to the dead one and it is working again.
So now I want to share with you, how it worked for me, and of course the working system dump.
So if one Captiva Tablet isn’t working anymore turn it off.
After that do the following steps:
1. Load the 7-Zip file and extract it.
2. After that turn off the Captiva tablet.
3. Insert a Micro USB cable in your computer.
4. Hold Vol+ and put in the Micro USB cable in the USB Port on tablet side (not the “Host” port).
Now Windows should try to find a driver for the new unknown device.
5. So open up the device manager of your Windows system.
6. Right klick on the Unknown Device and update the driver manually.
You will find the driver in the Android Tool Folder which is included in the downloaded File.
Depending on your local Windows take the x86 or x64 driver.
7. After you installed the driver manually, you should see the device as a new class usb device, in this case “rockusb device” or like “rk30sdk”.
8. Next step is to open the “AndroidTool.exe”.
9. The bottom should display “Found One LOADER Device”.
10. You need to deactivate the “Loader”, “Resoruce” and “Parameter” in the Tool.
11. Next you change the path of “Kernel”, “Boot”, “Misc”, “Recovery” and “System”.
12. Just doubleclick on the Path to change it manually or click on the right field of the changing part and a pop-up windows displays your windows explorer, so you get manually the way through the explorer to the extracted file from our downloaded file.
13. I deleted the not necessary parts in my example. Even don’t wonder of the “No devices found”, because I did connect the captiva tablet to my computer for the tutorial.
14. After you changed everything like on my screenshot (Folderpaths can be different), click on “RUN”.
15. The tool will copy every IMG to the tablet.
16. After it finished your tablet should start again.
17. Please disconnect it from the USB cable.
18. Turn the Tablet off.
19. Hold the Vol+ and put in the Power Adapter.
20. Still Hold Vol+ and Push the Power Button.
21. The Tablet should start into Recovery. If there is an android with a red Triangle – You are in the recovery mode. If not, try again.
22. To go on push Power Button and Vol+ one time together.
23. The menu of the recovery should appear and just go to “Wipe Factory Reset” with the Vol+ and Vol- Button.
24. Press the Power button for Enter the Factory Reset.
25. Accept the Reset.
26. After that Reboot System.
27. Congrats. The Tablet should start normally.
Download: well i am new, so not able to post external links... please contact me so i will forward the link
Name: Neuer Ordner.7z - 212 MB
No Password
No warranty or something else if you damage your ablet. You do it on your own risk.
Hi,
hopefully, you have not already deleted your dump. I happen to have a Captiva Pad 10 which only boots into recovery mode (android with red triangle) and then reboots only to display that android with the red triangle again (boot loop).
Perhaps I can fix this device using your dump. Your help would be greatly appreciated.
Thank you very much in advance and kind regards,
DAC324
Schnapz88 said:
Captiva 10 Inch Tablet
Modell CAPTIVA PAD 10
Android: 4.1.1
Kernel Version: 3.0.8+ [email protected] #29
Build-Number: RK30_ANDROID4.1.1-SDK-v1.00.00
ruifu_V2.60.20121105.dc72a7b
Well i did a dump from the Captiva 10 Inch Tablet. We had two, one died so we did a dump from the working one and put it back to the dead one and it is working again.
So now I want to share with you, how it worked for me, and of course the working system dump.
So if one Captiva Tablet isn’t working anymore turn it off.
After that do the following steps:
1. Load the 7-Zip file and extract it.
2. After that turn off the Captiva tablet.
3. Insert a Micro USB cable in your computer.
4. Hold Vol+ and put in the Micro USB cable in the USB Port on tablet side (not the “Host” port).
Now Windows should try to find a driver for the new unknown device.
5. So open up the device manager of your Windows system.
6. Right klick on the Unknown Device and update the driver manually.
You will find the driver in the Android Tool Folder which is included in the downloaded File.
Depending on your local Windows take the x86 or x64 driver.
7. After you installed the driver manually, you should see the device as a new class usb device, in this case “rockusb device” or like “rk30sdk”.
8. Next step is to open the “AndroidTool.exe”.
9. The bottom should display “Found One LOADER Device”.
10. You need to deactivate the “Loader”, “Resoruce” and “Parameter” in the Tool.
11. Next you change the path of “Kernel”, “Boot”, “Misc”, “Recovery” and “System”.
12. Just doubleclick on the Path to change it manually or click on the right field of the changing part and a pop-up windows displays your windows explorer, so you get manually the way through the explorer to the extracted file from our downloaded file.
13. I deleted the not necessary parts in my example. Even don’t wonder of the “No devices found”, because I did connect the captiva tablet to my computer for the tutorial.
14. After you changed everything like on my screenshot (Folderpaths can be different), click on “RUN”.
15. The tool will copy every IMG to the tablet.
16. After it finished your tablet should start again.
17. Please disconnect it from the USB cable.
18. Turn the Tablet off.
19. Hold the Vol+ and put in the Power Adapter.
20. Still Hold Vol+ and Push the Power Button.
21. The Tablet should start into Recovery. If there is an android with a red Triangle – You are in the recovery mode. If not, try again.
22. To go on push Power Button and Vol+ one time together.
23. The menu of the recovery should appear and just go to “Wipe Factory Reset” with the Vol+ and Vol- Button.
24. Press the Power button for Enter the Factory Reset.
25. Accept the Reset.
26. After that Reboot System.
27. Congrats. The Tablet should start normally.
Download: well i am new, so not able to post external links... please contact me so i will forward the link
Name: Neuer Ordner.7z - 212 MB
No Password
No warranty or something else if you damage your ablet. You do it on your own risk.
Click to expand...
Click to collapse
Can you please send me the link