[Dump] Captiva 10 Inch Tablet - Captivate General

Captiva 10 Inch Tablet
Modell CAPTIVA PAD 10
Android: 4.1.1
Kernel Version: 3.0.8+ [email protected] #29
Build-Number: RK30_ANDROID4.1.1-SDK-v1.00.00
ruifu_V2.60.20121105.dc72a7b
Well i did a dump from the Captiva 10 Inch Tablet. We had two, one died so we did a dump from the working one and put it back to the dead one and it is working again.
So now I want to share with you, how it worked for me, and of course the working system dump.
So if one Captiva Tablet isn’t working anymore turn it off.
After that do the following steps:
1. Load the 7-Zip file and extract it.
2. After that turn off the Captiva tablet.
3. Insert a Micro USB cable in your computer.
4. Hold Vol+ and put in the Micro USB cable in the USB Port on tablet side (not the “Host” port).
Now Windows should try to find a driver for the new unknown device.
5. So open up the device manager of your Windows system.
6. Right klick on the Unknown Device and update the driver manually.
You will find the driver in the Android Tool Folder which is included in the downloaded File.
Depending on your local Windows take the x86 or x64 driver.
7. After you installed the driver manually, you should see the device as a new class usb device, in this case “rockusb device” or like “rk30sdk”.
8. Next step is to open the “AndroidTool.exe”.
9. The bottom should display “Found One LOADER Device”.
10. You need to deactivate the “Loader”, “Resoruce” and “Parameter” in the Tool.
11. Next you change the path of “Kernel”, “Boot”, “Misc”, “Recovery” and “System”.
12. Just doubleclick on the Path to change it manually or click on the right field of the changing part and a pop-up windows displays your windows explorer, so you get manually the way through the explorer to the extracted file from our downloaded file.
13. I deleted the not necessary parts in my example. Even don’t wonder of the “No devices found”, because I did connect the captiva tablet to my computer for the tutorial.
14. After you changed everything like on my screenshot (Folderpaths can be different), click on “RUN”.
15. The tool will copy every IMG to the tablet.
16. After it finished your tablet should start again.
17. Please disconnect it from the USB cable.
18. Turn the Tablet off.
19. Hold the Vol+ and put in the Power Adapter.
20. Still Hold Vol+ and Push the Power Button.
21. The Tablet should start into Recovery. If there is an android with a red Triangle – You are in the recovery mode. If not, try again.
22. To go on push Power Button and Vol+ one time together.
23. The menu of the recovery should appear and just go to “Wipe Factory Reset” with the Vol+ and Vol- Button.
24. Press the Power button for Enter the Factory Reset.
25. Accept the Reset.
26. After that Reboot System.
27. Congrats. The Tablet should start normally.
Download: well i am new, so not able to post external links... please contact me so i will forward the link
Name: Neuer Ordner.7z - 212 MB
No Password
No warranty or something else if you damage your ablet. You do it on your own risk.

Hi,
hopefully, you have not already deleted your dump. I happen to have a Captiva Pad 10 which only boots into recovery mode (android with red triangle) and then reboots only to display that android with the red triangle again (boot loop).
Perhaps I can fix this device using your dump. Your help would be greatly appreciated.
Thank you very much in advance and kind regards,
DAC324

Schnapz88 said:
Captiva 10 Inch Tablet
Modell CAPTIVA PAD 10
Android: 4.1.1
Kernel Version: 3.0.8+ [email protected] #29
Build-Number: RK30_ANDROID4.1.1-SDK-v1.00.00
ruifu_V2.60.20121105.dc72a7b
Well i did a dump from the Captiva 10 Inch Tablet. We had two, one died so we did a dump from the working one and put it back to the dead one and it is working again.
So now I want to share with you, how it worked for me, and of course the working system dump.
So if one Captiva Tablet isn’t working anymore turn it off.
After that do the following steps:
1. Load the 7-Zip file and extract it.
2. After that turn off the Captiva tablet.
3. Insert a Micro USB cable in your computer.
4. Hold Vol+ and put in the Micro USB cable in the USB Port on tablet side (not the “Host” port).
Now Windows should try to find a driver for the new unknown device.
5. So open up the device manager of your Windows system.
6. Right klick on the Unknown Device and update the driver manually.
You will find the driver in the Android Tool Folder which is included in the downloaded File.
Depending on your local Windows take the x86 or x64 driver.
7. After you installed the driver manually, you should see the device as a new class usb device, in this case “rockusb device” or like “rk30sdk”.
8. Next step is to open the “AndroidTool.exe”.
9. The bottom should display “Found One LOADER Device”.
10. You need to deactivate the “Loader”, “Resoruce” and “Parameter” in the Tool.
11. Next you change the path of “Kernel”, “Boot”, “Misc”, “Recovery” and “System”.
12. Just doubleclick on the Path to change it manually or click on the right field of the changing part and a pop-up windows displays your windows explorer, so you get manually the way through the explorer to the extracted file from our downloaded file.
13. I deleted the not necessary parts in my example. Even don’t wonder of the “No devices found”, because I did connect the captiva tablet to my computer for the tutorial.
14. After you changed everything like on my screenshot (Folderpaths can be different), click on “RUN”.
15. The tool will copy every IMG to the tablet.
16. After it finished your tablet should start again.
17. Please disconnect it from the USB cable.
18. Turn the Tablet off.
19. Hold the Vol+ and put in the Power Adapter.
20. Still Hold Vol+ and Push the Power Button.
21. The Tablet should start into Recovery. If there is an android with a red Triangle – You are in the recovery mode. If not, try again.
22. To go on push Power Button and Vol+ one time together.
23. The menu of the recovery should appear and just go to “Wipe Factory Reset” with the Vol+ and Vol- Button.
24. Press the Power button for Enter the Factory Reset.
25. Accept the Reset.
26. After that Reboot System.
27. Congrats. The Tablet should start normally.
Download: well i am new, so not able to post external links... please contact me so i will forward the link
Name: Neuer Ordner.7z - 212 MB
No Password
No warranty or something else if you damage your ablet. You do it on your own risk.
Click to expand...
Click to collapse
Can you please send me the link

Related

Unlocked developers phone update to 1.5 not working

I have a developers phone that i am trying to update to 1.5 and am stuck on getting the ver updated.
As i am a new user to linux and have a ubuntu machine plus trying to learn these new programs am stuck.
i have tried a search on the net and tring to follow htc website fail on unloading the software as i am not sure which of the files to unload.
i tried this link
http://groups.google.com/group/Android-DevPhone-Updating/browse_thread/thread/d2970dd43f51d96c
when adding the updaew.zip file found the phone froze and on completion had to take out batterys to reboot.
still the files remain unchanged
baseband ver
62.33.20.08h_1.22.12.29
kernel ver2.6.25-01843-afea2660
[email protected]#6
build number
dream devphone-userdebug 1.0 unlocked 116222 test keys
i guess the way forward for me is a step by step upgrde that is relevant to my linux machine or find one for a windows machine as i have access to windows pc also.
thanks Vinny
1) download the recovery image from htc's website.
2) plug your phone into your USB.
3) copy the recovery image to the root of the USB drive as "update.zip".
4) unmount usb disk and wait for it to sync.
5) unplug usb cable
6) plug in charger (optional, make sure you have a full battery)
7) reboot holding the "home" key.
8) press "alt + L"
9) press "alt + S"
10) wait for it to do its thing.
11) press "home + back".
Done.

How to Flash Zeki TB782B, TB1082B Rom with Livesuit (UnBrick)

Zeki TB782B/TB1082B is using the Allwinner Chip A10.
I search in the web and found the Rom flash steps
Flash Tool LivesuitPack
http://hotfile.com/dl/136803097/cffe5ab/LiveSuitPack_v1.07_usb_drivers.rar.html
The flash ROM Demo video
http://www.youtube.com/watch?v=238RR-WvhrQ
You can get the Rom at below link
http://depositfiles.com/files/u7ew46yzm
FID HN TB1082B ROM
http://depositfiles.com/files/ay9hhvpyf
FID CF TB782B ROM
http://depositfiles.com/files/0wopipacg
FID BN TB1082B ROM
http://depositfiles.com/files/4uoxkwjc4
FIB BN TB782B ROM
1.Required files: Upgrade tool (Livesuit.exe)
2. Make sure your tablet is fully charged
3. Backup your data, device will be formatted during upgrade
4. The driver and upgrade software work for both Windows XP and Windows 7.
Upgrade Steps:
1. Unzip the upgrade tool and USB drive to your hard drive (recommend to put it in C:\ ).
Double-click the LiveSuitPack_v1.07.exe file, it will automatically install the driver files. Click “OK” to complete the driver installation.
2. Open Livesuit.exe
Double-click to open the upgrade tool LiveSuit.exe
3. Select the firmware
Click “No” to not choose the user upgrade wizard, and click the “Select Firmware” button (the first button from the left) to select the firmware .img file.
4. Turn off your tablet
Make sure the tablet is powered off (Turn it on, press the power button for more than 8 seconds to force power off)
5. Press the key combination to start it in the upgrade mode
a. Press and hold down the “Vol +”, button on TB782B,TB892B or “Home” button on TB1082B
b. Connect the USB cable to tablet and computer
c. After connecting the USB cable, press the power button 6 times quickly (you should get a popup window if done correctly, if not repeat step 5 from beginning)
d. DON’T release the “Vol+” button till the LiveSuit window pops up
e. You can now release the “Vol+” button
(Note: If you install the driver at this time the pop-up dialog box, the path to point to installation directory UsbDriver Livesuit folder, click Next to complete the driver installation prompts).
You should see Livesuit window pops up; otherwise, you didn’t do it correctly, you have to repeat step 4 and 5.
6. Select the format to force upgrade
Livesuit prompt “force format”, click “Yes” (Y). All of the original apps installed will be removed.
We highly recommend mandatory format! ! ! Otherwise the update is not complete and may brick! ! !
7. Upgrade begins
Pop-up “OK to force format” dialog box, select “Yes”, the upgrade begins:
8. The upgrade is complete
Firmware download process lasted about three and a half minutes or so, please wait until the prompt “upgrade successful.”
9. Automatic restart
After the upgrade is complete, your tablet will automatically restart, then you can unplug the USB cable.
Slow start-up time machine for the first time, please be patient.
If the machine does not restart automatically, press and hold the Power button for 8-10 seconds or more to ensure the power switch off, then press the Power button 3 seconds or more to turn on your tablet.
10. Congratulations! You have flashed the firmware.
you can get the Google Play at below link
http://forum.xda-developers.com/showthread.php?t=1621831
Do you have one for FID BN?
Sent from my GT-S5830 using xda app-developers app
Fid bn tb782b?
Need the ROM for FID BN TB782B, Can someone help so I can unbrick my Zeki 7? Thanks!
Thanks alot
I was searching for these ROM from along time. You saved my tablet.
in need of some help
Hello!
I bought 3 zeki tablets for my kids for xmas. I was able to follow another thread to put google play on them, and 2 of the 3 work great.
One of the tablets keeps freezing though. I did a factory reset, but in doing so, google play update stayed. So I found this thread and tried to follow the directions above.
Now I can't even get the tablet to turn on. :/
I am assuming it is something I did, and I am hoping that someone can help.
Thank you in advance!!
What's the FID shown on the back case.
Sent from my GT-N7000 using xda premium
Does this firmware add any new features? Also does the android version change?
Sent from my GT-S5830 using xda premium
Reflash the rom
Sent from my GT-N7000 using xda premium
All the rom is Andriod 4.04
Sent from my GT-N7000 using xda premium
Please help
cablepama said:
Zeki TB782B/TB1082B is using the Allwinner Chip A10.
I search in the web and found the Rom flash steps
Flash Tool LivesuitPack
http://hotfile.com/dl/136803097/cffe5ab/LiveSuitPack_v1.07_usb_drivers.rar.html
The flash ROM Demo video
http://www.youtube.com/watch?v=238RR-WvhrQ
You can get the Rom at below link
http://depositfiles.com/files/u7ew46yzm
FID HN TB1082B ROM
http://depositfiles.com/files/ay9hhvpyf
FID CF TB782B ROM
http://depositfiles.com/files/0wopipacg
FID BN TB1082B ROM
http://depositfiles.com/files/4uoxkwjc4
FIB BN TB782B ROM
1.Required files: Upgrade tool (Livesuit.exe)
2. Make sure your tablet is fully charged
3. Backup your data, device will be formatted during upgrade
4. The driver and upgrade software work for both Windows XP and Windows 7.
Upgrade Steps:
1. Unzip the upgrade tool and USB drive to your hard drive (recommend to put it in C:\ ).
Double-click the LiveSuitPack_v1.07.exe file, it will automatically install the driver files. Click “OK” to complete the driver installation.
2. Open Livesuit.exe
Double-click to open the upgrade tool LiveSuit.exe
3. Select the firmware
Click “No” to not choose the user upgrade wizard, and click the “Select Firmware” button (the first button from the left) to select the firmware .img file.
4. Turn off your tablet
Make sure the tablet is powered off (Turn it on, press the power button for more than 8 seconds to force power off)
5. Press the key combination to start it in the upgrade mode
a. Press and hold down the “Vol +”, button on TB782B,TB892B or “Home” button on TB1082B
b. Connect the USB cable to tablet and computer
c. After connecting the USB cable, press the power button 6 times quickly (you should get a popup window if done correctly, if not repeat step 5 from beginning)
d. DON’T release the “Vol+” button till the LiveSuit window pops up
e. You can now release the “Vol+” button
(Note: If you install the driver at this time the pop-up dialog box, the path to point to installation directory UsbDriver Livesuit folder, click Next to complete the driver installation prompts).
You should see Livesuit window pops up; otherwise, you didn’t do it correctly, you have to repeat step 4 and 5.
6. Select the format to force upgrade
Livesuit prompt “force format”, click “Yes” (Y). All of the original apps installed will be removed.
We highly recommend mandatory format! ! ! Otherwise the update is not complete and may brick! ! !
7. Upgrade begins
Pop-up “OK to force format” dialog box, select “Yes”, the upgrade begins:
8. The upgrade is complete
Firmware download process lasted about three and a half minutes or so, please wait until the prompt “upgrade successful.”
9. Automatic restart
After the upgrade is complete, your tablet will automatically restart, then you can unplug the USB cable.
Slow start-up time machine for the first time, please be patient.
If the machine does not restart automatically, press and hold the Power button for 8-10 seconds or more to ensure the power switch off, then press the Power button 3 seconds or more to turn on your tablet.
10. Congratulations! You have flashed the firmware.
you can get the Google Play at below link
http://forum.xda-developers.com/showthread.php?t=1621831
Click to expand...
Click to collapse
i cant install the driver
am formated the pc and also tried in another pc
please help me
Pratheesh T K said:
i cant install the driver
am formated the pc and also tried in another pc
please help me
Click to expand...
Click to collapse
I am in desperate need of a rom dump or even just the ft5x_ts.ko from a non 4.04 upgraded version of the Zeki TB 782B. If anyone reads this anymore and has one that has no been updated please send me a reply, I have found a way to repair ALL currupted FT5x touch panels but need an unmodified module to verify the process will work on other models as well.
Thanks.
i have the Zeki Quad Core 4.4.2 Android Tablet and i rooted it but now im looking for a custom recovery that supports my device can anyone help?
Link dead
This link is no longer work
Flash Tool LivesuitPack
http://hotfile.com/dl/136803097/cffe...ivers.rar.html
Dose anyone have new link that works or where I can find the tool
Not Working Getting Stuck @ 51%
cablepama said:
Zeki TB782B/TB1082B is using the Allwinner Chip A10.
I search in the web and found the Rom flash steps
Flash Tool LivesuitPack
http://hotfile.com/dl/136803097/cffe5ab/LiveSuitPack_v1.07_usb_drivers.rar.html
The flash ROM Demo video
http://www.youtube.com/watch?v=238RR-WvhrQ
You can get the Rom at below link
http://depositfiles.com/files/u7ew46yzm
FID HN TB1082B ROM
http://depositfiles.com/files/ay9hhvpyf
FID CF TB782B ROM
http://depositfiles.com/files/0wopipacg
FID BN TB1082B ROM
http://depositfiles.com/files/4uoxkwjc4
FIB BN TB782B ROM
1.Required files: Upgrade tool (Livesuit.exe)
2. Make sure your tablet is fully charged
3. Backup your data, device will be formatted during upgrade
4. The driver and upgrade software work for both Windows XP and Windows 7.
Upgrade Steps:
1. Unzip the upgrade tool and USB drive to your hard drive (recommend to put it in C:\ ).
Double-click the LiveSuitPack_v1.07.exe file, it will automatically install the driver files. Click “OK” to complete the driver installation.
2. Open Livesuit.exe
Double-click to open the upgrade tool LiveSuit.exe
3. Select the firmware
Click “No” to not choose the user upgrade wizard, and click the “Select Firmware” button (the first button from the left) to select the firmware .img file.
4. Turn off your tablet
Make sure the tablet is powered off (Turn it on, press the power button for more than 8 seconds to force power off)
5. Press the key combination to start it in the upgrade mode
a. Press and hold down the “Vol +”, button on TB782B,TB892B or “Home” button on TB1082B
b. Connect the USB cable to tablet and computer
c. After connecting the USB cable, press the power button 6 times quickly (you should get a popup window if done correctly, if not repeat step 5 from beginning)
d. DON’T release the “Vol+” button till the LiveSuit window pops up
e. You can now release the “Vol+” button
(Note: If you install the driver at this time the pop-up dialog box, the path to point to installation directory UsbDriver Livesuit folder, click Next to complete the driver installation prompts).
You should see Livesuit window pops up; otherwise, you didn’t do it correctly, you have to repeat step 4 and 5.
6. Select the format to force upgrade
Livesuit prompt “force format”, click “Yes” (Y). All of the original apps installed will be removed.
We highly recommend mandatory format! ! ! Otherwise the update is not complete and may brick! ! !
7. Upgrade begins
Pop-up “OK to force format” dialog box, select “Yes”, the upgrade begins:
8. The upgrade is complete
Firmware download process lasted about three and a half minutes or so, please wait until the prompt “upgrade successful.”
9. Automatic restart
After the upgrade is complete, your tablet will automatically restart, then you can unplug the USB cable.
Slow start-up time machine for the first time, please be patient.
If the machine does not restart automatically, press and hold the Power button for 8-10 seconds or more to ensure the power switch off, then press the Power button 3 seconds or more to turn on your tablet.
10. Congratulations! You have flashed the firmware.
you can get the Google Play at below link
http://forum.xda-developers.com/showthread.php?t=1621831
Click to expand...
Click to collapse
I have run the Livesuite and it appears to not work and I have been stuck for quite sometime. I need some help with getting a proper working image I was going to try to use:
FID BN TB1082B ROM
http://depositfiles.com/files/4uoxkwjc4
but the link is no longer active and would I haven't been able to use my tablet the other link is where it get stuck at 51% when trying to transfer the image
http://depositfiles.com/files/ay9hhvpyf
FID CF TB782B ROM
from this one and always gets stuck in the loading process of 51%
any other help with a link to the original image would be greatly appreciated. Thank you in advance!

[30.08.2014][ROM] JXD S7800B 8GB - CyanogenMod 11 Kitkat (With Power/Sleep fix)

Thought I would give people a heads up in case some wasn't aware about the beta of a ported CM11 rom. Seems great so far
ROM Download:
http://www.arctablet.com/blog/forum/crewrktablets-rk3188-entwicklung-customroms-development-croms/jxd-s7800b-gamepad-8gb-kitkat-cyanogenmod-11-rom/
Rom Installation:
1. Download Rockchip Batch Tool 1.7: http://www.cloudstor.es/file/m1_OTM0OA/
2. Connect your S7800B to your computer via USB 2.0 (avoid USB 3.0 ports).
3. Power up your device and run the file RKBatchTool.exe (requires administrator) on your computer.
4. You'll note the tool shows a pink color indicating the status (device is connected).
5. Click the "Switch" button and your device will reboot. Install drivers via Device Manager.
6. Press the "Reset" button your device, wait for it to boot up.
7. Again, click the "Switch" button, this time the area above will turn green - programming mode ready (if it doesn't you didn't install the driver).
8. Select the desired flash image file (.img) and press "Restore".
Power Button/Sleep Fix (RK3188-T users):
For those people who have the power button/sleep bug in most custom roms (RK3188-T users) you will also need to flash the extracted kernel.img from Webclaws 2G/SPECIAL rom.
Kernel.img/Flash tool:
http://boards.dingoonity.org/jxd-devices/%28kernel-only%29-powersleep-fix-for-jxd-s7800-%28rk3188-t%29/

Guide [Root]ing the [T230NU] for DUMMIES (Galaxy Tab 4 7.0)

1. To start off, make sure your tablet's battery is fully charged.
2. Download the 'T230NU Root Kit' & 'Samsung USB Driver' files to your PC & extract them.
3. Locate the 'Samsung USB Driver' file and install it on your PC.
4. In your Tablet go into Settings/General, scroll down and click on 'About device'. Look for where it says 'Build number', you need to TAP that continuously until it says 'Developer mode has been turned on'. You should now see 'Developer options' on top of 'About device', click it and checkmark 'USB Debugging'.
5. Connect the tablet to your PC with the USB cable.
6. In your PC locate the 'UPDATE-SuperSU-v2.46' file and copy it to your Tablet (Root directory of your tablet is fine or place it anywhere you want, remember the location and DO NOT EXTRACT IT, just copy it as it is).
7. Disconnect the tablet from your PC & power it off.
8. Put your Tablet into 'Download Mode' (push all these three buttons at the same time; Power/VolumeDOWN/Home) As soon as you see letters on the screen IMMEDIATELY hit the 'VolumeUP' button while letting go of the other three buttons). If you did it right, it should now say 'Downloading...', if not then power it off and try again.
9. Connect the tablet to your PC with the USB cable.
10. In your PC locate the 'Odin3 v3.09' file, right click it and choose 'Run as administrator'. Once the program opens it should automatically detect your tablet--it should say 'Added!!' under Message. Now click on the button that says 'BL' and locate the 'openrecovery-twrp-2.8.0.1-degas' file, select it and click open. Make sure to uncheck 'Auto-Reboot' and then click 'Start'. When it's done you should see the word RESET in blue on top & it should say 'RES OK!!' under message.
11. Disconnect the tablet from your PC & power it off by holding down the power button for at least 10 seconds.
12. Now that your tablet is off, go into 'Recovery Mode' (push all these three buttons at the same time; Power/VolumeUP/Home) As soon as the Samsung logo comes up let go of ONLY the power button, then as soon as you see the 'Teamwin' logo IMMEDIATELY let go of the other two buttons. If you did it right then you should now be inside the 'Teamwin' program, if not and your device booted up normally then you need to try again starting from step #7.
13. Click on 'Install' and locate the 'UPDATE-SuperSU-v2.46' file--depending on where you saved it in your tablet on step #6, now at the bottom where it says 'Swipe to Confirm Flash' swipe it to the right, wait until it is done flashing and then choose 'Reboot System'.
14. Before you start jumping for joy, lets first check for Root status (once your tablet boots up, go to the play store and download an app called 'Root Check',
install it, open it & it should say that your device is 'ROOTED').
15. Congratulations! You now have full control of your device.
Are you aware this is now the third how-to-root guide thread made for this exact method, for this model?
First
Second
its same device and same twrp so its for NU and no NU versions, works on both
I've been using the Acheron ROM for more than a year now and it has been a great experience.
AmelieCo said:
I've been using the Acheron ROM for more than a year now and it has been a great experience.
Click to expand...
Click to collapse
isnt acheron thread...... but ive used it too for 10 months now
How do I uninstall this root please?
blairrad said:
How do I uninstall this root please?
Click to expand...
Click to collapse
You can check the uninstall option in superSu app or Re-install your firmware(or install any rom). I also think there might be some kind of superSu-uninstaller script/app somewhere in forums.
how to root galaxy tab4, Model: SM-T230NW, T230NWBMW1ARB1

[STOCK ROM][TOOL][ALCATEL] One touch tab 7 (T15)

Probably, if you are here then your alcatel touch is running with the Prestigio 7.0 multipad stock rom (PM3970), with no wireless and no accelerometer. Finally, I got my hands on the stock rom for the Alcatel one touch (T15). I would lay out the instructions that finally got this tab to work.
I stumbled upon it on an arabic forum called gsm-flash.com, tested it and thought of sharing it with you:
Download the AmLogic USB burning tool attached
Run the AmLogic app with administrative privileges
Power off your device
Connect the device using the USB cable
Press Power & Vol + until you see that your device is connected on Port 1 of the app
If all is good, goto step 10,if it didn’t then you need the drivers, proceed to step 8
Locate the Amlogic tool folder and then select the AmLogicUSBurningDrive folder
Select the win7 folder, locate the right installer and run it as admin
Go back to 3
In the Amlogic app, select File, then Import, locate the Alcatel-tab 7 archive you downloaded from below, pass it as it is, don’t UNZIP it
Optionally, you can pass the Serial number of the device if you want,and the CU reference in this case, T105-3AALEU1, I didn’t pass either of them, but the CU reference was added under the model number in the about tablet
Click Start
Wait for the process to complete
If successful proceed to step 15, otherwise, goto step 3 and repeat, which was what happened to me, I repeated it 3 times
Finally, the phone reboots with Alcatel One Touch logo, it will take some time
I was impatient, restarted it, and waited, then rebooted into recovery by using Power & Vol +, and made a factory reset
And Voila.Congrats on restoring your device
I apologize, don't have the right to post external URLS at the moment. Copy and paste without the quotes.
"https://drive.google.com/file/d/1s0wh5NZCNpxG2j7-QneQGYbeB30MlkJr/view?usp=sharing"
"https://drive.google.com/file/d/1CRdXmZ7uQ1LSpgWV5hI-7-3yBgltF7XF/view?usp=sharing"
Hope this helps anyone.
Regards,

Categories

Resources