Database Info

How to Flash Zeki TB782B, TB1082B Rom with Livesuit (UnBrick)

Zeki TB782B/TB1082B is using the Allwinner Chip A10.
I search in the web and found the Rom flash steps
Flash Tool LivesuitPack
http://hotfile.com/dl/136803097/cffe5ab/LiveSuitPack_v1.07_usb_drivers.rar.html
The flash ROM Demo video
http://www.youtube.com/watch?v=238RR-WvhrQ
You can get the Rom at below link
http://depositfiles.com/files/u7ew46yzm
FID HN TB1082B ROM
http://depositfiles.com/files/ay9hhvpyf
FID CF TB782B ROM
http://depositfiles.com/files/0wopipacg
FID BN TB1082B ROM
http://depositfiles.com/files/4uoxkwjc4
FIB BN TB782B ROM
1.Required files: Upgrade tool (Livesuit.exe)
2. Make sure your tablet is fully charged
3. Backup your data, device will be formatted during upgrade
4. The driver and upgrade software work for both Windows XP and Windows 7.
Upgrade Steps:
1. Unzip the upgrade tool and USB drive to your hard drive (recommend to put it in C:\ ).
Double-click the LiveSuitPack_v1.07.exe file, it will automatically install the driver files. Click “OK” to complete the driver installation.
2. Open Livesuit.exe
Double-click to open the upgrade tool LiveSuit.exe
3. Select the firmware
Click “No” to not choose the user upgrade wizard, and click the “Select Firmware” button (the first button from the left) to select the firmware .img file.
4. Turn off your tablet
Make sure the tablet is powered off (Turn it on, press the power button for more than 8 seconds to force power off)
5. Press the key combination to start it in the upgrade mode
a. Press and hold down the “Vol +”, button on TB782B,TB892B or “Home” button on TB1082B
b. Connect the USB cable to tablet and computer
c. After connecting the USB cable, press the power button 6 times quickly (you should get a popup window if done correctly, if not repeat step 5 from beginning)
d. DON’T release the “Vol+” button till the LiveSuit window pops up
e. You can now release the “Vol+” button
(Note: If you install the driver at this time the pop-up dialog box, the path to point to installation directory UsbDriver Livesuit folder, click Next to complete the driver installation prompts).
You should see Livesuit window pops up; otherwise, you didn’t do it correctly, you have to repeat step 4 and 5.
6. Select the format to force upgrade
Livesuit prompt “force format”, click “Yes” (Y). All of the original apps installed will be removed.
We highly recommend mandatory format! ! ! Otherwise the update is not complete and may brick! ! !
7. Upgrade begins
Pop-up “OK to force format” dialog box, select “Yes”, the upgrade begins:
8. The upgrade is complete
Firmware download process lasted about three and a half minutes or so, please wait until the prompt “upgrade successful.”
9. Automatic restart
After the upgrade is complete, your tablet will automatically restart, then you can unplug the USB cable.
Slow start-up time machine for the first time, please be patient.
If the machine does not restart automatically, press and hold the Power button for 8-10 seconds or more to ensure the power switch off, then press the Power button 3 seconds or more to turn on your tablet.
10. Congratulations! You have flashed the firmware.
you can get the Google Play at below link
http://forum.xda-developers.com/showthread.php?t=1621831

Do you have one for FID BN?
Sent from my GT-S5830 using xda app-developers app

Fid bn tb782b?
Need the ROM for FID BN TB782B, Can someone help so I can unbrick my Zeki 7? Thanks!

Thanks alot
I was searching for these ROM from along time. You saved my tablet.

in need of some help
Hello!
I bought 3 zeki tablets for my kids for xmas. I was able to follow another thread to put google play on them, and 2 of the 3 work great.
One of the tablets keeps freezing though. I did a factory reset, but in doing so, google play update stayed. So I found this thread and tried to follow the directions above.
Now I can't even get the tablet to turn on. :/
I am assuming it is something I did, and I am hoping that someone can help.
Thank you in advance!!

What's the FID shown on the back case.
Sent from my GT-N7000 using xda premium

Does this firmware add any new features? Also does the android version change?
Sent from my GT-S5830 using xda premium

Reflash the rom
Sent from my GT-N7000 using xda premium

All the rom is Andriod 4.04
Sent from my GT-N7000 using xda premium

Please help
cablepama said:
Zeki TB782B/TB1082B is using the Allwinner Chip A10.
I search in the web and found the Rom flash steps
Flash Tool LivesuitPack
http://hotfile.com/dl/136803097/cffe5ab/LiveSuitPack_v1.07_usb_drivers.rar.html
The flash ROM Demo video
http://www.youtube.com/watch?v=238RR-WvhrQ
You can get the Rom at below link
http://depositfiles.com/files/u7ew46yzm
FID HN TB1082B ROM
http://depositfiles.com/files/ay9hhvpyf
FID CF TB782B ROM
http://depositfiles.com/files/0wopipacg
FID BN TB1082B ROM
http://depositfiles.com/files/4uoxkwjc4
FIB BN TB782B ROM
1.Required files: Upgrade tool (Livesuit.exe)
2. Make sure your tablet is fully charged
3. Backup your data, device will be formatted during upgrade
4. The driver and upgrade software work for both Windows XP and Windows 7.
Upgrade Steps:
1. Unzip the upgrade tool and USB drive to your hard drive (recommend to put it in C:\ ).
Double-click the LiveSuitPack_v1.07.exe file, it will automatically install the driver files. Click “OK” to complete the driver installation.
2. Open Livesuit.exe
Double-click to open the upgrade tool LiveSuit.exe
3. Select the firmware
Click “No” to not choose the user upgrade wizard, and click the “Select Firmware” button (the first button from the left) to select the firmware .img file.
4. Turn off your tablet
Make sure the tablet is powered off (Turn it on, press the power button for more than 8 seconds to force power off)
5. Press the key combination to start it in the upgrade mode
a. Press and hold down the “Vol +”, button on TB782B,TB892B or “Home” button on TB1082B
b. Connect the USB cable to tablet and computer
c. After connecting the USB cable, press the power button 6 times quickly (you should get a popup window if done correctly, if not repeat step 5 from beginning)
d. DON’T release the “Vol+” button till the LiveSuit window pops up
e. You can now release the “Vol+” button
(Note: If you install the driver at this time the pop-up dialog box, the path to point to installation directory UsbDriver Livesuit folder, click Next to complete the driver installation prompts).
You should see Livesuit window pops up; otherwise, you didn’t do it correctly, you have to repeat step 4 and 5.
6. Select the format to force upgrade
Livesuit prompt “force format”, click “Yes” (Y). All of the original apps installed will be removed.
We highly recommend mandatory format! ! ! Otherwise the update is not complete and may brick! ! !
7. Upgrade begins
Pop-up “OK to force format” dialog box, select “Yes”, the upgrade begins:
8. The upgrade is complete
Firmware download process lasted about three and a half minutes or so, please wait until the prompt “upgrade successful.”
9. Automatic restart
After the upgrade is complete, your tablet will automatically restart, then you can unplug the USB cable.
Slow start-up time machine for the first time, please be patient.
If the machine does not restart automatically, press and hold the Power button for 8-10 seconds or more to ensure the power switch off, then press the Power button 3 seconds or more to turn on your tablet.
10. Congratulations! You have flashed the firmware.
you can get the Google Play at below link
http://forum.xda-developers.com/showthread.php?t=1621831
Click to expand...
Click to collapse
i cant install the driver
am formated the pc and also tried in another pc
please help me

Pratheesh T K said:
i cant install the driver
am formated the pc and also tried in another pc
please help me
Click to expand...
Click to collapse
I am in desperate need of a rom dump or even just the ft5x_ts.ko from a non 4.04 upgraded version of the Zeki TB 782B. If anyone reads this anymore and has one that has no been updated please send me a reply, I have found a way to repair ALL currupted FT5x touch panels but need an unmodified module to verify the process will work on other models as well.
Thanks.

i have the Zeki Quad Core 4.4.2 Android Tablet and i rooted it but now im looking for a custom recovery that supports my device can anyone help?

Link dead
This link is no longer work
Flash Tool LivesuitPack
http://hotfile.com/dl/136803097/cffe...ivers.rar.html
Dose anyone have new link that works or where I can find the tool

Not Working Getting Stuck @ 51%
cablepama said:
Zeki TB782B/TB1082B is using the Allwinner Chip A10.
I search in the web and found the Rom flash steps
Flash Tool LivesuitPack
http://hotfile.com/dl/136803097/cffe5ab/LiveSuitPack_v1.07_usb_drivers.rar.html
The flash ROM Demo video
http://www.youtube.com/watch?v=238RR-WvhrQ
You can get the Rom at below link
http://depositfiles.com/files/u7ew46yzm
FID HN TB1082B ROM
http://depositfiles.com/files/ay9hhvpyf
FID CF TB782B ROM
http://depositfiles.com/files/0wopipacg
FID BN TB1082B ROM
http://depositfiles.com/files/4uoxkwjc4
FIB BN TB782B ROM
1.Required files: Upgrade tool (Livesuit.exe)
2. Make sure your tablet is fully charged
3. Backup your data, device will be formatted during upgrade
4. The driver and upgrade software work for both Windows XP and Windows 7.
Upgrade Steps:
1. Unzip the upgrade tool and USB drive to your hard drive (recommend to put it in C:\ ).
Double-click the LiveSuitPack_v1.07.exe file, it will automatically install the driver files. Click “OK” to complete the driver installation.
2. Open Livesuit.exe
Double-click to open the upgrade tool LiveSuit.exe
3. Select the firmware
Click “No” to not choose the user upgrade wizard, and click the “Select Firmware” button (the first button from the left) to select the firmware .img file.
4. Turn off your tablet
Make sure the tablet is powered off (Turn it on, press the power button for more than 8 seconds to force power off)
5. Press the key combination to start it in the upgrade mode
a. Press and hold down the “Vol +”, button on TB782B,TB892B or “Home” button on TB1082B
b. Connect the USB cable to tablet and computer
c. After connecting the USB cable, press the power button 6 times quickly (you should get a popup window if done correctly, if not repeat step 5 from beginning)
d. DON’T release the “Vol+” button till the LiveSuit window pops up
e. You can now release the “Vol+” button
(Note: If you install the driver at this time the pop-up dialog box, the path to point to installation directory UsbDriver Livesuit folder, click Next to complete the driver installation prompts).
You should see Livesuit window pops up; otherwise, you didn’t do it correctly, you have to repeat step 4 and 5.
6. Select the format to force upgrade
Livesuit prompt “force format”, click “Yes” (Y). All of the original apps installed will be removed.
We highly recommend mandatory format! ! ! Otherwise the update is not complete and may brick! ! !
7. Upgrade begins
Pop-up “OK to force format” dialog box, select “Yes”, the upgrade begins:
8. The upgrade is complete
Firmware download process lasted about three and a half minutes or so, please wait until the prompt “upgrade successful.”
9. Automatic restart
After the upgrade is complete, your tablet will automatically restart, then you can unplug the USB cable.
Slow start-up time machine for the first time, please be patient.
If the machine does not restart automatically, press and hold the Power button for 8-10 seconds or more to ensure the power switch off, then press the Power button 3 seconds or more to turn on your tablet.
10. Congratulations! You have flashed the firmware.
you can get the Google Play at below link
http://forum.xda-developers.com/showthread.php?t=1621831
Click to expand...
Click to collapse
I have run the Livesuite and it appears to not work and I have been stuck for quite sometime. I need some help with getting a proper working image I was going to try to use:
FID BN TB1082B ROM
http://depositfiles.com/files/4uoxkwjc4
but the link is no longer active and would I haven't been able to use my tablet the other link is where it get stuck at 51% when trying to transfer the image
http://depositfiles.com/files/ay9hhvpyf
FID CF TB782B ROM
from this one and always gets stuck in the loading process of 51%
any other help with a link to the original image would be greatly appreciated. Thank you in advance!

[Q] S3 working with tmobile but need help changing baseband

Hey everyone,
I recently was given a Verizon galaxy s3 I want to use it with tmobile. I used these steps
a) Download Samsung Drivers if you do not already have them. It is an Exe file: DOWNLOAD
b) Run what you just downloaded, to install the drivers.
c) Download the ODIN3 Software, this software lets you flash (which means write to the hardware of your computer which is normally not possible) your phone. The file you are downloading is compressed, which means you need to first uncompress it. DOWNLOAD
d) Extract (Uncompress) the folder you just downloaded, and run ODIN3 which will be one of the files inside the folder you just extracted.
NOTE ODIN3 is an Executable File, which means you do not install it, you just click on it to run it.
e) Now we need to download the file VRALEC Bootchain. This file will be used by to allow us to flash (using the ODIN3 software) a customized recovery image on to your phone. DOWNLOAD
NOTE: What an image is, is simply a snap shot of a harddrive, sort to speak. Someone who has advanced knowledge of the Android OS, created a snap shot of their Phone "Harddrive" (firmware) so that others could simply replace their current Android OS, with the customized one.
f) Turn off your phone. HOLD DOWN the Volume Down Key, Home Key, and the POWER down key. As soon as the phone Vibrates release the POWER button only. Once the ODIN Screen comes up, release the other two buttons and hit the Volume UP key.
g) Now connect your phone to your computer using your USB Cable.
h) Now on your computer, bring up ODIN3 and click on PDA, this will bring up a file selector. You want to select the VRALEC Bootchain you just downloaded (VRALEC.bootchain.tar.md5 for example).
WARNING: DO NOT CLICK ANY CHECK-BOXES, YOU WILL DAMAGE YOUR PHONE.
NOTE: After you select the file, the box next to the PDA button should now be populated with the location of the file: C:\Users\yourname\Downloads\VRALEC.bootchain.tar.md5.
i) Now locate the Start button, located below the PDA button.
WARNING: DO NOT UNPLUG YOUR PHONE OR TURN IT OFF DURING THIS PROCESS.
NOTE: Once it is complete, your phone will restart.
j) After your phone restarts, go back to ODIN3 and click the Reset button, it is located right next to the Start button.
k) Unplug your phone and then turn it off, and finally take the back cover off.
l) We need to get back to the ODIN mode. Turn off your phone (if its not off already). Push and hold down the Volume Down Button, Home Button, and the POWER Button. As soon as the phone Vibrates release the Power Button only. Once the ODIN Screen comes up, release the other two buttons and hit the Volume UP Button.
m) Once you are in ODIN Mode connect your phone again to your computer
n) Now you need to download ClockworkMod Touch Recovery 6.0.2.3 (a recover image that you will use to replace your current Android OS with a Unlocked one). DOWNLOAD
o) After you download it, bring up the ODIN3 software again, and this time you want to UNCHECK Auto-Reboot. This is very important, after you uncheck it, the only option that should be CHECKED is the F.Rest Time option.
p) Now click on the Bootloader button and select the Clockwork recovery image we downloaded at step n. (CWM6023TouchVZW.tar.md5 for example)
NOTE: After you select the recovery image, the box next to the should display the location of the; C:\Users\yourname\Downloads\CWM6023TouchVZW.tar.md5
q) Now locate and click the Start button again, located at the bottom of the ODIN3 Panel
WARNING: DO NOT UNPLUG YOUR PHONE OR TURN IT OFF DURING THIS PROCESS.
r) After it has finished running, disconnect your phone, turn it off, and take out the battery. Leave the battery out for at least 20 seconds.
s) We need to now turn on the Phone into Recovery. To get into Recovery mode follow these steps; Turn off your phone (if its not off already). Push and hold down the Volume UP Button, Home Button, and the POWER Key. As soon as the phone Vibrates release the Power Button only.
NOTE Once you see "Recovery Mode..." at the top left of the screen you can let go of the buttons.
t) Once in recover mode, select reboot system now, after you click it, it will ask you if you want to disable recovery flash. YOU MUST SELECT "Yes - Disable recovery flash"
ATTENTION : The following step is very important, you must select Yes - Disable recovery flash
u) We need to now download the Super User Package to grant us Root. DOWNLOAD
NOTE: This package is a compressed zip file. DO NOT UNCOMPRESS THIS FILE, YOU NEED IT TO BE COMPRESSED.
v) Connect your phone back to your computer, and copy the zip file you just downloaded in step u, to your phone's External SD card. (SuperSU_Bootloader_FIXED.zip for example, will be the name of the file that you will copy over)
w) We now need to get into Recovery mode again. To get into Recovery mode follow these steps; Turn off your phone. Push and hold down the Volume UP Button, Home Button, and the POWER Key. As soon as the phone Vibrates release the Power Button only.
NOTE Once you see "Recovery Mode..." at the top left of the screen you can let go of the buttons.
x) Once you are in recovery mode, select "- install zip from sdcard"
y) Then click on "- choose zip from external sdcard"
z) Now find the file you downloaded and copied over. (SuperSU_Bootloader_FIXED.zip for example) and select it.
NOTE: if you can't see the file, you may need to scroll down, to find it.
Sigh... this is a long process.... I am past step z!
z1) Click on "- Yes - Install SuperSU_Bootloader_FIXED.zip"
z2) After its finished, a you will see the menu again. Click on "++++++ Go Back+++++++"
z3) Click on "- reboot system now" your system should now be restarting.
We are not done yet, we now need to add the Tmobile APNs to our phone, however, the phone is set up to prevent you to do this, because of greed, corruption and a broken system.
Here are the original instructions to allow APNs unlocking in its entirety : Full Guide
z4) go to the Play Store, then search for and install BuildProp Editor
z5) Once it is installed, open it up and it will as you to grant the application superuser access, click on "GRANT"
z6) click the phone Menu Button, and when the menu comes up, click on Edit
z7) Scroll all the way to the botton, and add these two lines to it:
ril.sales_code=LOL
ro.csc.sales_code=LOL
z8) After entering the new in the two new lines, click on Save Icon located top right. It will pop up a message near the bottom center that will let you know it was saved.
z9) After you save it, restart your phone.go to
•Settings
•More Settings
•Mobile Networks
•Access Point Names
Here are the original instructions to set up Tmobile APN in its entirety : Full Guide
z10) Click on the phones Menu Button and click on "+ New APN"
z11) Click on Name, set it "T-Mobile" then click OK
z12) Click on APN, and set it to "epc.tmobile.com" then click OK
z13) Click on MMSC and set it to "mms.msg.eng.t-mobile.com/mms/wapenc" then Click OK
z14) Click on the phones Menu Button and click on "Save"
z15) Click on "T-Mobile" and then restart your phone.
THATS IT! We are done... man
to root and unlock the bootloader and shows my phone is rooted but in step t I did not get the "Yes - Disable recovery flash" message. I did continue to the rest of the steps and it shows that my phone is rooted but I still can not stick to tmobiles towers and I keep getting a pop up asking if I want to switch to global. Does not clicking "Yes - Disable recovery flash" make the difference to making it work with tmobile? If so how can I fix this. Also, I still can not send or receive picture messages. I have the Samsung galaxy s3 i535 4.1.2. baseband version i535vrbmf1. I hope someone can help me

Instead of selecting global, try GSM/UTS
Sent from my Last Ever Samsung Device.

0331 said:
Instead of selecting global, try GSM/UTS
Sent from my Last Ever Samsung Device.
Click to expand...
Click to collapse
I have and still nothing. I have also tried to network unlock Via secret menu umts,debug screen,phone control, network lock but after that their is no options. Anyway to manually change the bandbase?

The baseband can be changed by flashing a different modem, I believe. What do you want to change it to?
The messages issue sounds like an APN issue to me.
Sent from my Last Ever Samsung Device.
---------- Post added at 03:51 PM ---------- Previous post was at 03:46 PM ----------
Where did you find the guide that you followed? Can you provide a link?
Sent from my Last Ever Samsung Device.

0331 said:
The baseband can be changed by flashing a different modem, I believe. What do you want to change it to?
The messages issue sounds like an APN issue to me.
Sent from my Last Ever Samsung Device.
---------- Post added at 03:51 PM ---------- Previous post was at 03:46 PM ----------
Where did you find the guide that you followed? Can you provide a link?
Sent from my Last Ever Samsung Device.
Click to expand...
Click to collapse
I was told by tmobile I need to unlock the phone and then change the baseband. I was able to change the apn without any app.

[Completed] R

Alright for the past two week I had searched every corner of the internet looking up on how to install the “MOAR ROM”. Just getting the same answer install with “TWRP”. And to install TWRP you had to root your phone. So now I had to search on the internet and find a tutorial on how to root my phone. In the end I had to go through three different tutorials on how to get the MOAR ROM flashed on my phone. And where I had to go to get the files to download.
Well so you don’t have to do the long, and arbitrary tasks that I had to go through. Here is a tutorial – Telling you from start to finish on what you need to do.
This is for the Sprint Variant of the Samsung Galaxy S5. I don’t know if this will work on other version of the S5.
I apologize on the crudeness of this tutorial, a lot of this was written from memory.
All of the software you need to download is provided by clicking on words that are highlighted in brownish tan-ish color
I don’t not nor do the developers of the software you use are responsible for the lost of data and/or lost of your phone. You assume responsible for modifying your phone.
I have not created any of the software provide in this tutorial.
Step 1. Make sure you have VPU1BOA6 (Lollipop) OS installed on your phone.
-To see if you have this already installed your phone.
- You go to your phones “Setting”
- From there go to “About Device”
- You will then see “Software Version” and underneath that you will see “G900PVPU1BOA6”
If you see “OA6” you are good to go on to step 2. for rooting your device. So Please Continue. If you do not see this that is okay all you need to do is either update your phone or you need to flash the appropriate OS on your phone. To do this continue on to step 1a.
Step 1a. If you fail to see “OA6” in under “Software Version” then you will have to download some files.
- You will need to download Odin
- Then you will need to download the OS “Lollipop”
- Once you have both of these move to step 1b.
Step 1b. Warning!!! Installing this OS will wipe your phone of all its data. Highly recommend that you create back of contacts, photos, videos, etc.
- Now unzip Odin, and run SM-G900P_OA6_FullRestore.exe (This is will give you the Lollipop OS it will unzip it to the file destination you wish)
-Run Odin, Click on the AP button – A window should appear, navigate to where you unzip the OS and click on it.
- Now it is time to move on to set 1c.
Step 1c. Now it is time to put your phone into Recovery Mode and to connect to the computer.
- Power down the phone, once the phone is power down hold the “Home + Power + Volume Down Buttons” Do not let go until you see text show up in the upper left corner of the screen.
- Now some of you might see a screen that gives you a Warning about custom firmware and roms. And press up on the volume on button to continue or press volume down to restart the phone. If you want to continue press up.
- If you have elected to press up then you are awesome and it is time to continue on your route to being rooted. Now you will see the Android Guy “Downloading” or something to that effect. Plug your phone into your computer
- Now move to step 1d.
Step 1d. Again Warning: You will lose your phone data. Continue at your own risk.
- Press Start, on Odin once your phone is connected to your computer. Let it do its thing. Go make some coffee.
- Once it has installed the new OS go ahead and setup your “Slight used Phone”
-You ready for step 2. I think you are.
Step 2. Alright you have decide to root your phone, because you love all the options the Android OS has already provided you. But you know your phone can do more and you want more and deserve all of it.
- So first thing you need is the rooting tool and Odin if you don’t have download it. You will also need to two other additional files. SUPERSU and Knox Removal Mod Do Not Unzip these two (2) additional files.
-Now that you have the all four (4) items downloaded. Unzip the rooting tool and Odin. Now run Odin and click the AP button and find the rooting tool you just unzipped. Now let’s put your phone into download mode and connect to the computer.
- To put your phone into Download mode shut it down and hold the “Home + Power + Volume Down Buttons” until you see a Words in the upper left hand corner of the screen and a Paragraph that Say “Warning. Custom firmware Blah Blah Blah…etc. Press Volume Up to continue or Volume down to restart phone” Press up then Android guy shows up with downloading underneath him. Connect your phone at this point to the computer.
-Press start on Odin. Let it do its thing it should only take to 5 minutes at the most. Now that it is done. Shut your device completely down.
-Go to step 2a.
Step 2a. You will need a Micro SD card. Add those two other files. To the root of the SD card.
- Move to step 2b.
Step 2b. You need to put your phone into recovery mode.
- Your device should be completely shut off now. To put into recovery mode you need to hold down these buttons (Home + Power + Volume UP Buttons). You should see in the upper left hand corner of the screen text saying Recovery…
- You will see a list of options you will want to click to on “apply update from external storage” Find one of the two files you add to the root of the SD card and click. It should start to apply the update. Once that is complete. Repeat the process from Step 2b. for the other file.
- Go to Step 3.
Step 3. So you have decide you like to play risky and rooting just wasn’t cutting for you Daredevil.
- Go to “Play Store” Type into the Search bar “TWRP” – Install “TWRP Manager”
- Once it installed, Open the application, Grant the application root access. Now that the application has root access click on Menu icon in the upper left hand side. Once there go to “Install TWRP”.
- Click on “Device Name” and scroll through the device list and find the “Galaxy s5” and click it. It will then go back to “Install TWRP” page. Now press “Install Recovery” And let it work.
-Go to Step 4.
Step 4. Assuming everything for you so far has gone to plan. The next step is to install MOAR (Mother Of All Roms). Do not unzip the file.
-Connect your phone to the computer.
-Now that you have download MOAR. Move it the “Download” Folder on the SD Card. It will make easier to locate later.
- Now power down the phone and go into the recovery menu. To do this make sure your phone is off and now hold (Home + Power + Volume UP Buttons). Once there click on “Advance”, Then “File Manager”. There you will a list of options scroll until you see “external_sdcard”. Now you will see another list scroll until you see “download”.
-Now find the “MOAR” file. Click it, a couple of options will show up and press “Move”. Now a list will show up, scroll through it and locate the "sdcard”. Another list will show up, scroll through it and locate “TWRP” and press “Select” in the lower right corner and let it do its thing.
- Now go back to the Main Menu. Once you get there click “Install”. You should see the MOAR file, click it. It will take you to another screen and it will ask you to “Swipe to Confirm Flash”. After that your coffee should be done brewing and you might want to get a bagel while you are at.
If you get a couple of errors after installing MOAR, remove the battery and then stick back in and it should correct your problem.

Hi there,
Thank you for your share but here isn't the right place for such a threads. Please post your thread here:
Miscellaneous Android Development
Good luck
Thread closed

[GUIDE] Bypass FRP lock "Verify your account" on Samsung Galaxy devices

Hi, this is my first thread, so please forgive me some mistakes.
THIS IS ONLY FOR DEVICES WHICH BOOTS TO SYSTEM AND STUCK AT "VERYFING YOUR ACCOUNT"
What do You need:
1. Your device
2. USB cable
3. Computer (PC or MAC)
4. Samsung SideSync
5. Some Time
Steps to do:
1. On computer download Samsung SideSync from Samsung website (Google for it), then install and run it
2. Boot your phone and get to "Verify your account" screen
3. Now connect your computer and phone with USB cable
4. On the phone You should see a popup which asks to select action. Choose Google Chrome JUST ONCE and unplug USB
5. Click "Accept", "No, Thanks", then in adress bar type "Nova Launcher apk" (or whatever you prefer)
6. Download APK file form any website (click OK, when chrome prompts, you should see "Downloading..." message)
7. Keep pressing back buton until you get back to "Verify yout account" screen
8. Connect to computer again, and then choose "Galaxy Apps" JUST ONCE
9. Click "Agree" and then you schould see some errors, just click "OK" and in "Search" type "ES File Explorer"
10. Click Download, accept all, ignore errors (yeah, you will need Samsung account to download)
11. Run ES File Explorer, ignore update and navigate to Download folder
12. Click on APK downloaded in step 6, and install it (enable unknown sources and click install)
13. After that click open and BOOM! You are at home screen, but you must do one more thing
14. Navigate to settings -> Apps -> All -> Google Services Framework and Click Disable
15. Using back buton go back to home screen and open Play Store
16. As you can see it asks you to add Google account, so go ahead and add yours
17. Ignore errors by clicking "OK" and when Google play app shows (with apps or with Error) get back to home screen
18. Now hold power button and select "Restart"/"Reboot"
19. Now just complete first steps and Remember to enable back Google Services Framework
20. Volia, your device works :laugh:
If you have any questions just ask below
Regards, Filip

I have samsung s7 edge and whenever i connect to OTG FLASH DRIVE OR WITH SIDESYN it shows nothing (no popup windows,any one have any idea how can it be fixed??
Ta

lubomirdemeter91 said:
I have samsung s7 edge and whenever i connect to OTG FLASH DRIVE OR WITH SIDESYN it shows nothing (no popup windows,any one have any idea how can it be fixed??
Ta
Click to expand...
Click to collapse
Sorry, I can't test it, I don't have S7

help
otg or sidesync dont work. i tried many times.

help on step 4
picakia said:
Hi, this is my first thread, so please forgive me some mistakes.
THIS IS ONLY FOR DEVICES WHICH BOOTS TO SYSTEM AND STUCK AT "VERYFING YOUR ACCOUNT"
What do You need:
1. Your device
2. USB cable
3. Computer (PC or MAC)
4. Samsung SideSync
5. Some Time
Steps to do:
1. On computer download Samsung SideSync from Samsung website (Google for it), then install and run it
2. Boot your phone and get to "Verify your account" screen
3. Now connect your computer and phone with USB cable
4. On the phone You should see a popup which asks to select action. Choose Google Chrome JUST ONCE and unplug USB
5. Click "Accept", "No, Thanks", then in adress bar type "Nova Launcher apk" (or whatever you prefer)
6. Download APK file form any website (click OK, when chrome prompts, you should see "Downloading..." message)
7. Keep pressing back buton until you get back to "Verify yout account" screen
8. Connect to computer again, and then choose "Galaxy Apps" JUST ONCE
9. Click "Agree" and then you schould see some errors, just click "OK" and in "Search" type "ES File Explorer"
10. Click Download, accept all, ignore errors (yeah, you will need Samsung account to download)
11. Run ES File Explorer, ignore update and navigate to Download folder
12. Click on APK downloaded in step 6, and install it (enable unknown sources and click install)
13. After that click open and BOOM! You are at home screen, but you must do one more thing
14. Navigate to settings -> Apps -> All -> Google Services Framework and Click Disable
15. Using back buton go back to home screen and open Play Store
16. As you can see it asks you to add Google account, so go ahead and add yours
17. Ignore errors by clicking "OK" and when Google play app shows (with apps or with Error) get back to home screen
18. Now hold power button and select "Restart"/"Reboot"
19. Now just complete first steps and Remember to enable back Google Services Framework
20. Volia, your device works :laugh:
If you have any questions just ask below
Regards, Filip
Click to expand...
Click to collapse
On Step 4, I'm not getting a popup to select action. Any ideas why?
---------- Post added at 02:56 PM ---------- Previous post was at 02:53 PM ----------
milo123milo said:
otg or sidesync dont work. i tried many times.
Click to expand...
Click to collapse
I know this is an older thread but I'm just trying this now. Side Sync didn't work for me either. Did you ever find a way to bypass FRP lock?
---------- Post added at 03:06 PM ---------- Previous post was at 02:56 PM ----------
lubomirdemeter91 said:
I have samsung s7 edge and whenever i connect to OTG FLASH DRIVE OR WITH SIDESYN it shows nothing (no popup windows,any one have any idea how can it be fixed??
Ta
Click to expand...
Click to collapse
I have a an on5 but same issue, no pop up appears. Did you ever find a way to bypass the FRP lock?

[GUIDE] (Root, CWM, Bootloader) Acer Iconia Tab A3-A10 FINALLY!

Ladies and Gentlemen, I finally have all Files needed to ROOT, FLASH CWM and UNLOCK THE BOOTLOADER!
Original Post: No Longer exists
First, download the zip file that has all the tools needed:
A3-A10 BOOT UNLOCK TOOLS.zip Link:http://www.mediafire.com/file/aotfwsyvg9mcx51/Acer_Iconia_A3-A10_Boot_Unlock_Tools.zip/file
INSTALLING DRIVERS
Open the Downloaded "MTK_Signed_Drivers.zip" and unzip it.
Turn off your tablet and open the back cover, its hold on by some plastic clasps. (You can grab it by the ports on the left side.)
Disconnect the battery. As shown here:https://imgur.com/gallery/cTTeFjC
Now, connect the tablet to the computer. (Use a good cable, plug it in the back of the PC if you can)
You should now see "MT65xx Preloader" installing. If it fails, or it cannot find a driver, do this:
Open Device Manager
Look for the missing device
Right click it and press update driver
A window opens press "Search for a driver on the computer"
Then press "Select a driver from a list"
Now, press on the button "Have Disk"
Go to the folder you extracted the MTK Signed Driver into
Press next, next, wait for it to install.
Unlocking Bootloader and Flashing CWM
Unzip the Acer Unlock Pack.
Unzip SPFT and run "flash-tool.exe" as an administrator.
Click on "Scatter Loading" and select "Android emmc scatter" from the unlock pack.
Click on "Window" then "Write Memory"
Switch To the tab "Write Memory"
Click "Open Raw data" and choose "secuoff.img" from unlock pack
VERY IMPORTANT!!!!! SELECT EMMC
Now go to "Begin Address (Hex)" and write 0x3D0000
Disconnect your tablet if it is still connected
Click on Write memory, the one with the blue arrow.
Connect your tablet, SPFT detects it and starts Writing process.
When done, you should see A green ring and it should say "OK"
DONT TURN ON YOU TABLET!!!
Go back to "Download" tab
Select RECOVERY, PRELOADER and BOOTIMG
Double click on PRELOADER to choose "preloader_unlocked.bin" from unlock pack
Double click on BOOTIMG and choose the unsecure_KK_boot.img you downloaded
Double click on Recovery and choose the CWM image you downloaded.
If your tablet is connected, Disconnect it.
Click Download.
Connect your tablet
It starts flashing, when done it should show a green ring and say OK
OTHER STEPS
After flashing, reconnect the battery and put back the back cover.
Now, Press and Hold VOLUME UP and POWER at the same time, try to restart into recovery.
At first boot, CWM should ask you if you want to disable the flash of the Recovery stock (Acer), choose Yes
CONGRATS!! YOUR TABLET HAS UNLOCKED BOOTLOADER AND CWM!
ROOT
Place the SuperSU.zip into a micro SD Card and put it into the tablet
Reboot into CWM and flash it.
DONE.
THERE IS A RISK OF BRICKING YOU TAB, IM NOT RESPONSIBLE FOR ANITHING YOU DO WRONG.
ALL ACTIONS ARE ON YOUR OWN RISK!

battery disconnection
TimmSkiller said:
Ladies and Gentlemen, I finally have all Files needed to ROOT, FLASH CWM and UNLOCK THE BOOTLOADER!
Original Post: No Longer exists
First, download the zip file that has all the tools needed:
...
Click to expand...
Click to collapse
Why do you have to disconnect the battery? What if the battery's drained, should you still disconnect it?
(I'd rather let the back cover on 'cause I've already damaged a tab removing it)