Related
Hi, I tried to install a rom such as an update (I took the update.img into the root of my archos and It started to update) but when it rebooted It did not start ... So I bricked my Archos 7 HT ;(
Do you know how can I unbrick my archos 7 ht, please ???
(Sorry for my poor english, but I am italian...)
Sent from my iPhone using Tapatalk
Anyone can help me ???
;((
Sent from my iPhone using Tapatalk
Hi,
look here:
http://forum.archosfans.com/viewforum.php?f=59
Then also watch "unbrick APAD" these are the same platforms RK2808.
http://www.slatedroid.com/index.php?topic=5092.0
http://www.youtube.com/watch?v=rqSydpZumno
Good luck
anyone knows where can i download rmandroiddm.exe ?
I restored it using this tuto
If you have a device which is not recognizable by the PC:
You need a 32-bit Windows (I used WinXP VMware player image from my Win7 64-bit)
In my case connecting the device to the PC did not resulted in access to the memory, only the drive letters appeared, but could not be mounted.
At the same time, the RKandroid tool did not recognize the device at all.
So, we need to reflash the archos 7ht. For this we need to enter update mode - and here is the trick:
1. Shutdown the tablet (in my case - pin reset shutdowns it)
2. LOCK the sliding button (for me this was the tricky part to find out)
3. Connect the USB cable and the powercable.
4. The winXP should detect a new USB device. Make him happy - give him the rk28usb-new drivers to install.
5. Now the RKAndroidTool.exe should be able to detect the RKandroid USB device.
Ok, if you've got this far, now we need to re-flash it. For safety, let's do this with the default Archos 7HT update image (which can be downloaded from the Archos website)
I think that the RKAndroidTool.exe needs extracted files from update.img. For this, extract them using AFPTool.exe:
AFPTool.exe -unpack update.img .
(or use the extractupdate.bat)
Now, we can finish the reflashing:
6. Start RKAndroidTool.exe.
7. If the extracted files from update.img are placed in rockdev folder and in image subfolder, the RKAndroidTool.exe should find them automatically.
8. Execute. Make sure the device is plugged to AC, because the process takes some time. IF THE PROCESS STOPS UNEXPECTEDLY YOU GET A HIGH-TECH BRICK (or so everyone says, I didn't test it).
9. You should see the device responding and starting the update process. It will take some time, dont ruch it.
~20 seconds – copy firmware to device,
~30 seconds – device firmware installation,
~3-8 minutes - First boot
10. The Archos Tablet should ask you to recalibrate the screen, and load the OS.
That's it. Good luck!
==========================================
Sent from my iPhone using Tapatalk
Zeki TB782B/TB1082B is using the Allwinner Chip A10.
I search in the web and found the Rom flash steps
Flash Tool LivesuitPack
http://hotfile.com/dl/136803097/cffe5ab/LiveSuitPack_v1.07_usb_drivers.rar.html
The flash ROM Demo video
http://www.youtube.com/watch?v=238RR-WvhrQ
You can get the Rom at below link
http://depositfiles.com/files/u7ew46yzm
FID HN TB1082B ROM
http://depositfiles.com/files/ay9hhvpyf
FID CF TB782B ROM
http://depositfiles.com/files/0wopipacg
FID BN TB1082B ROM
http://depositfiles.com/files/4uoxkwjc4
FIB BN TB782B ROM
1.Required files: Upgrade tool (Livesuit.exe)
2. Make sure your tablet is fully charged
3. Backup your data, device will be formatted during upgrade
4. The driver and upgrade software work for both Windows XP and Windows 7.
Upgrade Steps:
1. Unzip the upgrade tool and USB drive to your hard drive (recommend to put it in C:\ ).
Double-click the LiveSuitPack_v1.07.exe file, it will automatically install the driver files. Click “OK” to complete the driver installation.
2. Open Livesuit.exe
Double-click to open the upgrade tool LiveSuit.exe
3. Select the firmware
Click “No” to not choose the user upgrade wizard, and click the “Select Firmware” button (the first button from the left) to select the firmware .img file.
4. Turn off your tablet
Make sure the tablet is powered off (Turn it on, press the power button for more than 8 seconds to force power off)
5. Press the key combination to start it in the upgrade mode
a. Press and hold down the “Vol +”, button on TB782B,TB892B or “Home” button on TB1082B
b. Connect the USB cable to tablet and computer
c. After connecting the USB cable, press the power button 6 times quickly (you should get a popup window if done correctly, if not repeat step 5 from beginning)
d. DON’T release the “Vol+” button till the LiveSuit window pops up
e. You can now release the “Vol+” button
(Note: If you install the driver at this time the pop-up dialog box, the path to point to installation directory UsbDriver Livesuit folder, click Next to complete the driver installation prompts).
You should see Livesuit window pops up; otherwise, you didn’t do it correctly, you have to repeat step 4 and 5.
6. Select the format to force upgrade
Livesuit prompt “force format”, click “Yes” (Y). All of the original apps installed will be removed.
We highly recommend mandatory format! ! ! Otherwise the update is not complete and may brick! ! !
7. Upgrade begins
Pop-up “OK to force format” dialog box, select “Yes”, the upgrade begins:
8. The upgrade is complete
Firmware download process lasted about three and a half minutes or so, please wait until the prompt “upgrade successful.”
9. Automatic restart
After the upgrade is complete, your tablet will automatically restart, then you can unplug the USB cable.
Slow start-up time machine for the first time, please be patient.
If the machine does not restart automatically, press and hold the Power button for 8-10 seconds or more to ensure the power switch off, then press the Power button 3 seconds or more to turn on your tablet.
10. Congratulations! You have flashed the firmware.
you can get the Google Play at below link
http://forum.xda-developers.com/showthread.php?t=1621831
Do you have one for FID BN?
Sent from my GT-S5830 using xda app-developers app
Fid bn tb782b?
Need the ROM for FID BN TB782B, Can someone help so I can unbrick my Zeki 7? Thanks!
Thanks alot
I was searching for these ROM from along time. You saved my tablet.
in need of some help
Hello!
I bought 3 zeki tablets for my kids for xmas. I was able to follow another thread to put google play on them, and 2 of the 3 work great.
One of the tablets keeps freezing though. I did a factory reset, but in doing so, google play update stayed. So I found this thread and tried to follow the directions above.
Now I can't even get the tablet to turn on. :/
I am assuming it is something I did, and I am hoping that someone can help.
Thank you in advance!!
What's the FID shown on the back case.
Sent from my GT-N7000 using xda premium
Does this firmware add any new features? Also does the android version change?
Sent from my GT-S5830 using xda premium
Reflash the rom
Sent from my GT-N7000 using xda premium
All the rom is Andriod 4.04
Sent from my GT-N7000 using xda premium
Please help
cablepama said:
Zeki TB782B/TB1082B is using the Allwinner Chip A10.
I search in the web and found the Rom flash steps
Flash Tool LivesuitPack
http://hotfile.com/dl/136803097/cffe5ab/LiveSuitPack_v1.07_usb_drivers.rar.html
The flash ROM Demo video
http://www.youtube.com/watch?v=238RR-WvhrQ
You can get the Rom at below link
http://depositfiles.com/files/u7ew46yzm
FID HN TB1082B ROM
http://depositfiles.com/files/ay9hhvpyf
FID CF TB782B ROM
http://depositfiles.com/files/0wopipacg
FID BN TB1082B ROM
http://depositfiles.com/files/4uoxkwjc4
FIB BN TB782B ROM
1.Required files: Upgrade tool (Livesuit.exe)
2. Make sure your tablet is fully charged
3. Backup your data, device will be formatted during upgrade
4. The driver and upgrade software work for both Windows XP and Windows 7.
Upgrade Steps:
1. Unzip the upgrade tool and USB drive to your hard drive (recommend to put it in C:\ ).
Double-click the LiveSuitPack_v1.07.exe file, it will automatically install the driver files. Click “OK” to complete the driver installation.
2. Open Livesuit.exe
Double-click to open the upgrade tool LiveSuit.exe
3. Select the firmware
Click “No” to not choose the user upgrade wizard, and click the “Select Firmware” button (the first button from the left) to select the firmware .img file.
4. Turn off your tablet
Make sure the tablet is powered off (Turn it on, press the power button for more than 8 seconds to force power off)
5. Press the key combination to start it in the upgrade mode
a. Press and hold down the “Vol +”, button on TB782B,TB892B or “Home” button on TB1082B
b. Connect the USB cable to tablet and computer
c. After connecting the USB cable, press the power button 6 times quickly (you should get a popup window if done correctly, if not repeat step 5 from beginning)
d. DON’T release the “Vol+” button till the LiveSuit window pops up
e. You can now release the “Vol+” button
(Note: If you install the driver at this time the pop-up dialog box, the path to point to installation directory UsbDriver Livesuit folder, click Next to complete the driver installation prompts).
You should see Livesuit window pops up; otherwise, you didn’t do it correctly, you have to repeat step 4 and 5.
6. Select the format to force upgrade
Livesuit prompt “force format”, click “Yes” (Y). All of the original apps installed will be removed.
We highly recommend mandatory format! ! ! Otherwise the update is not complete and may brick! ! !
7. Upgrade begins
Pop-up “OK to force format” dialog box, select “Yes”, the upgrade begins:
8. The upgrade is complete
Firmware download process lasted about three and a half minutes or so, please wait until the prompt “upgrade successful.”
9. Automatic restart
After the upgrade is complete, your tablet will automatically restart, then you can unplug the USB cable.
Slow start-up time machine for the first time, please be patient.
If the machine does not restart automatically, press and hold the Power button for 8-10 seconds or more to ensure the power switch off, then press the Power button 3 seconds or more to turn on your tablet.
10. Congratulations! You have flashed the firmware.
you can get the Google Play at below link
http://forum.xda-developers.com/showthread.php?t=1621831
Click to expand...
Click to collapse
i cant install the driver
am formated the pc and also tried in another pc
please help me
Pratheesh T K said:
i cant install the driver
am formated the pc and also tried in another pc
please help me
Click to expand...
Click to collapse
I am in desperate need of a rom dump or even just the ft5x_ts.ko from a non 4.04 upgraded version of the Zeki TB 782B. If anyone reads this anymore and has one that has no been updated please send me a reply, I have found a way to repair ALL currupted FT5x touch panels but need an unmodified module to verify the process will work on other models as well.
Thanks.
i have the Zeki Quad Core 4.4.2 Android Tablet and i rooted it but now im looking for a custom recovery that supports my device can anyone help?
Link dead
This link is no longer work
Flash Tool LivesuitPack
http://hotfile.com/dl/136803097/cffe...ivers.rar.html
Dose anyone have new link that works or where I can find the tool
Not Working Getting Stuck @ 51%
cablepama said:
Zeki TB782B/TB1082B is using the Allwinner Chip A10.
I search in the web and found the Rom flash steps
Flash Tool LivesuitPack
http://hotfile.com/dl/136803097/cffe5ab/LiveSuitPack_v1.07_usb_drivers.rar.html
The flash ROM Demo video
http://www.youtube.com/watch?v=238RR-WvhrQ
You can get the Rom at below link
http://depositfiles.com/files/u7ew46yzm
FID HN TB1082B ROM
http://depositfiles.com/files/ay9hhvpyf
FID CF TB782B ROM
http://depositfiles.com/files/0wopipacg
FID BN TB1082B ROM
http://depositfiles.com/files/4uoxkwjc4
FIB BN TB782B ROM
1.Required files: Upgrade tool (Livesuit.exe)
2. Make sure your tablet is fully charged
3. Backup your data, device will be formatted during upgrade
4. The driver and upgrade software work for both Windows XP and Windows 7.
Upgrade Steps:
1. Unzip the upgrade tool and USB drive to your hard drive (recommend to put it in C:\ ).
Double-click the LiveSuitPack_v1.07.exe file, it will automatically install the driver files. Click “OK” to complete the driver installation.
2. Open Livesuit.exe
Double-click to open the upgrade tool LiveSuit.exe
3. Select the firmware
Click “No” to not choose the user upgrade wizard, and click the “Select Firmware” button (the first button from the left) to select the firmware .img file.
4. Turn off your tablet
Make sure the tablet is powered off (Turn it on, press the power button for more than 8 seconds to force power off)
5. Press the key combination to start it in the upgrade mode
a. Press and hold down the “Vol +”, button on TB782B,TB892B or “Home” button on TB1082B
b. Connect the USB cable to tablet and computer
c. After connecting the USB cable, press the power button 6 times quickly (you should get a popup window if done correctly, if not repeat step 5 from beginning)
d. DON’T release the “Vol+” button till the LiveSuit window pops up
e. You can now release the “Vol+” button
(Note: If you install the driver at this time the pop-up dialog box, the path to point to installation directory UsbDriver Livesuit folder, click Next to complete the driver installation prompts).
You should see Livesuit window pops up; otherwise, you didn’t do it correctly, you have to repeat step 4 and 5.
6. Select the format to force upgrade
Livesuit prompt “force format”, click “Yes” (Y). All of the original apps installed will be removed.
We highly recommend mandatory format! ! ! Otherwise the update is not complete and may brick! ! !
7. Upgrade begins
Pop-up “OK to force format” dialog box, select “Yes”, the upgrade begins:
8. The upgrade is complete
Firmware download process lasted about three and a half minutes or so, please wait until the prompt “upgrade successful.”
9. Automatic restart
After the upgrade is complete, your tablet will automatically restart, then you can unplug the USB cable.
Slow start-up time machine for the first time, please be patient.
If the machine does not restart automatically, press and hold the Power button for 8-10 seconds or more to ensure the power switch off, then press the Power button 3 seconds or more to turn on your tablet.
10. Congratulations! You have flashed the firmware.
you can get the Google Play at below link
http://forum.xda-developers.com/showthread.php?t=1621831
Click to expand...
Click to collapse
I have run the Livesuite and it appears to not work and I have been stuck for quite sometime. I need some help with getting a proper working image I was going to try to use:
FID BN TB1082B ROM
http://depositfiles.com/files/4uoxkwjc4
but the link is no longer active and would I haven't been able to use my tablet the other link is where it get stuck at 51% when trying to transfer the image
http://depositfiles.com/files/ay9hhvpyf
FID CF TB782B ROM
from this one and always gets stuck in the loading process of 51%
any other help with a link to the original image would be greatly appreciated. Thank you in advance!
First, I would like to thank Pogodancer in millions for his STEP by STEP tutorial which helped me to load STOCK ROM on my CUBOT C7 chinese phone. I am sure this tutorial will help others to fix their CUBOT C7 phone. This tutorial is also good for PHONES with SpreadTrum SP6820 on Android 2.3.6/4.0.1 . (Make sure you have the right STOCK ROM for your phone).
Here is the link to Pogodancer's original Post:
http://forum.xda-developers.com/showthread.php?t=2018023&page=2
HOW TO LOAD STOCK ROM ON YOUR CUBOT C7:
WARNING: YOU ARE DOING THIS PROCESS ON YOUR OWN AND I DO NOT TAKE ANY RESPONSIBILITY IF
SOMETHING GOES WRONG WITH YOUR PHONE. YOU ARE FULLY RESPONSIBLE DOING THIS PROCEDURE.
1) Download the CUBOT C7 Stock rom from here:
Stock Rom: www.cubot.net/UploadFile/Soft/C7_root_Software.rar ------ (After downloading the file EXTRACT or UNZIP it)
Here you can find other tools for CUBOT C7 - http://www.cubot.net/Service.aspx (NOTE: This is not required)
2) Download this package it has the USB Driver and Flashing Tools. Install USB Driver...
http://www55.zippyshare.com/v/44295424/file.html
3) Be sure to have installed the correct drivers. For my SC6820-device I see 5 items in Win7-32bit-device-manager (ADB-Composite, 2 x
COM-ports, 2 x USB devices: all without exclamation marks). You can use the drivers from the package folder "SCI-android-usb-driver-jungo-
v4-.rar".
4) Disable just in case your Win7 firewall. (If you are using Windows XP, you don't have to do this step)
5) Launch "ChannelServer.exe" from package folder "CHANNELSERVER" and allow firewall if asked.
6) Start "ResearchDownload.exe" from package folder "ResearchDownload".
7) In ResearchDownload-application chose firmware with first button (for me: 20121006_c909_JF_EAHC_V12.PAC).----- This is the STOCK
ROM file that you have downloaded and Extracted it on STEP 1.
8) Be sure to SET the Baudrate-settings in ResearchDownload-Settings (second button). I recommend 115200.
9) Press the Start (Play) button in ResearchDownload-application (third button).
10) Turn off the phone.
11) Keep holding the "volume down"-key.
12) Without releasing the button "volume down" plug the usb-cord from phone to your PC (install the driver if not done before in step 2).
13) Keep holding down the Volume Down button..... The process of firmware-burning should start now in ResearchDownload-application and
take approximately 1 Minute.
11. Wait until the firmware-flashing has been finished (A green sign appeares + "Passed" is written in ResearchDownload-application).
12. Remove the battery, wait 20 seconds. Put battery back and turn on the phone (first boot may take a while but not more than 5 minutes).
Use this at your own risk.
No cigar on Cubot C7
Tried, but did not work on Win7 64. Drivers install but Windows says the device would not run because signature is too old.
:crying:
z_man3007 said:
First, I would like to thank Pogodancer in millions for his STEP by STEP tutorial which helped me to load STOCK ROM on my CUBOT C7 chinese phone. I am sure this tutorial will help others to fix their CUBOT C7 phone. This tutorial is also good for PHONES with SpreadTrum SP6820 on Android 2.3.6/4.0.1 . (Make sure you have the right STOCK ROM for your phone).
Here is the link to Pogodancer's original Post:
http://forum.xda-developers.com/showthread.php?t=2018023&page=2
HOW TO LOAD STOCK ROM ON YOUR CUBOT C7:
WARNING: YOU ARE DOING THIS PROCESS ON YOUR OWN AND I DO NOT TAKE ANY RESPONSIBILITY IF
SOMETHING GOES WRONG WITH YOUR PHONE. YOU ARE FULLY RESPONSIBLE DOING THIS PROCEDURE.
1) Download the CUBOT C7 Stock rom from here:
Stock Rom: www.cubot.net/UploadFile/Soft/C7_root_Software.rar ------ (After downloading the file EXTRACT or UNZIP it)
Here you can find other tools for CUBOT C7 - http://www.cubot.net/Service.aspx (NOTE: This is not required)
2) Download this package it has the USB Driver and Flashing Tools. Install USB Driver...
http://www55.zippyshare.com/v/44295424/file.html
3) Be sure to have installed the correct drivers. For my SC6820-device I see 5 items in Win7-32bit-device-manager (ADB-Composite, 2 x
COM-ports, 2 x USB devices: all without exclamation marks). You can use the drivers from the package folder "SCI-android-usb-driver-jungo-
v4-.rar".
4) Disable just in case your Win7 firewall. (If you are using Windows XP, you don't have to do this step)
5) Launch "ChannelServer.exe" from package folder "CHANNELSERVER" and allow firewall if asked.
6) Start "ResearchDownload.exe" from package folder "ResearchDownload".
7) In ResearchDownload-application chose firmware with first button (for me: 20121006_c909_JF_EAHC_V12.PAC).----- This is the STOCK
ROM file that you have downloaded and Extracted it on STEP 1.
8) Be sure to SET the Baudrate-settings in ResearchDownload-Settings (second button). I recommend 115200.
9) Press the Start (Play) button in ResearchDownload-application (third button).
10) Turn off the phone.
11) Keep holding the "volume down"-key.
12) Without releasing the button "volume down" plug the usb-cord from phone to your PC (install the driver if not done before in step 2).
13) Keep holding down the Volume Down button..... The process of firmware-burning should start now in ResearchDownload-application and
take approximately 1 Minute.
11. Wait until the firmware-flashing has been finished (A green sign appeares + "Passed" is written in ResearchDownload-application).
12. Remove the battery, wait 20 seconds. Put battery back and turn on the phone (first boot may take a while but not more than 5 minutes).
Use this at your own risk.
Click to expand...
Click to collapse
Cubot C7
kostar said:
Tried, but did not work on Win7 64. Drivers install but Windows says the device would not run because signature is too old.
:crying:
Click to expand...
Click to collapse
Have you tried downloading the 64-bit driver from cubot dot net webside?. Here is the link
Darn, I cant post a link here.... go to cubot dot net website and click on services and download C7 USB Driver.
Once you download the file. Extract it and in there you will find X64 and X86 Folder. Use the drivers from X64 folder cause you are using 64-bit Windows 7.
Cant download the "C7_root_software.rar"
Ok so i just followed another tutorial on how to root the Cubot and unfortunatelz the telephone is stuck on bootcycle for whatever reason. I believe I didnt delete any critical application, but hey ... simply wont boot up.
Now I cant download the C7_root_software from the cubot-net website. Could anyone please upload the software somewhere else so I could download it and load stock ROM on my device. Would be a great help for me.
Thanks in advance to all of those concerned.
Worked
Hello guyz, an update after 2 hours. I did successfully load stock ROM on Cubot C7 from ebay. Exactly like the tutorial says. Thanks for the tutorial.
I just thought that as the download from cubot net is reaaaallly slow and I have even requested the ROM myself others may have the same problem so here you go a mega key for the files
C7_root_software: Hp2f3lp-UerqPjPs2pUu-jgzruFj59Dtz0B5ScLZSGE
Debug_Tool: ByLnzD1Q7XgPALRoYx35GnEnyIcsX_oIMCLlMyRSY7w
I cant post links and those are file keys to download from Mega.co.nz, simply search for "download from mega with file key".
Thanks for the tutorial and see you around.
CUBOT C7 - How to root
pijemcolu said:
Ok so i just followed another tutorial on how to root the Cubot and unfortunatelz the telephone is stuck on bootcycle for whatever reason. I believe I didnt delete any critical application, but hey ... simply wont boot up.
Now I cant download the C7_root_software from the cubot-net website. Could anyone please upload the software somewhere else so I could download it and load stock ROM on my device. Would be a great help for me.
Thanks in advance to all of those concerned.
Click to expand...
Click to collapse
The easiest way to root Cubot C7 is using Z4Root.apk tool. Download the pack from the web and copy over to your phones internal storage.
Here are the steps:
1) Install the Z4Root on your phone.
2) Run Z4Root on your phone.
3) First, run Temporary Root, You will see Superuser icon if it ran successfully.
4) Run Z4Root again and this time Run Permanent Root. You phone will boot and you will have your phone permanently rooted.
Thanks
Thank you so much for your help, follow the guide, all worked great, download was abit slow but I didn't worry about that knowing this is the only god dam tutrial I can find, thanks so much, had to register to make this post.
Thanks for the stock rom.I am now currently making a custom rom for the CUBOT C7
CUBOT C7
In case, anyone having trouble downloading the CUBOT C7 STOCK rom please download it from the following link. Thanks
https://mega.co.nz/#!5A1zURIK!BI-fQWVttxOcSDRd4jMTuzwl7xFcyxP9463-lq9GmqU
It's not working
Hello everyone,i did it just like above said,but it doesn't do anything,like the channel server is not connecting,and also the research download is not doing anything.
The drivers are installed,only a yellow triangle with information like signature,is there anyway to do something about it?
Windows 7 64bit,cubot c7 Android 2.3.9.
Now the reason is for the upgrading is that i have two issues,one with the signal is not wel,like cutting voice,from the mic of the phone,when talking through the phone but with the earphones it's much beter.second is that the bluetooth headset is only working for transfering audio like music to the BT earphone,and when talk to the phone i cannot hear or other people cannot hear me at all,it;s like muted the phone!!!!
Any one know about it,i cannot find anything here.
n.b.:tried 3 BT earphones
Also i see when i have a usim in the phone,it's like that there is 3G system!
Anybody?
Hello,i'm searching on the forum+net,but i cannot load again the update.zip from the site because there is no recovery option after install stock rom !Maybe someone has a solution for this?
Update the update.zip
gvanels said:
Hello everyone,i did it just like above said,but it doesn't do anything,like the channel server is not connecting,and also the research download is not doing anything.
The drivers are installed,only a yellow triangle with information like signature,is there anyway to do something about it?
Windows 7 64bit,cubot c7 Android 2.3.9.
Now the reason is for the upgrading is that i have two issues,one with the signal is not wel,like cutting voice,from the mic of the phone,when talking through the phone but with the earphones it's much beter.second is that the bluetooth headset is only working for transfering audio like music to the BT earphone,and when talk to the phone i cannot hear or other people cannot hear me at all,it;s like muted the phone!!!!
Any one know about it,i cannot find anything here.
n.b.:tried 3 BT earphones
Also i see when i have a usim in the phone,it's like that there is 3G system!
Click to expand...
Click to collapse
So after searching i did it!BUT in order to fix things(only fixed BT audio)there are many things that i don't can do....like a sync only apps,and after an restart i must put again a code,or the memory is out,and ofcourse no recovery menu,and other minor issues,How can i restore the rom that there is on there site/support.Maybe someone knows how to update the update.zip without recovery menu?
Thank you, on the very detailed,
Help please
Hello, I have a T999 dual sim (looks like a Xperia) it has sp6820a with 650mhz, Do you think I can use this ROM?
Please help me with this, I just kill a fake S3 i9300+ to follow another instructions.
Thank you so much from Argentina
QUOTE=z_man3007;37987768]First, I would like to thank Pogodancer in millions for his STEP by STEP tutorial which helped me to load STOCK ROM on my CUBOT C7 chinese phone. I am sure this tutorial will help others to fix their CUBOT C7 phone. This tutorial is also good for PHONES with SpreadTrum SP6820 on Android 2.3.6/4.0.1 . (Make sure you have the right STOCK ROM for your phone).
Here is the link to Pogodancer's original Post:
http://forum.xda-developers.com/showthread.php?t=2018023&page=2
HOW TO LOAD STOCK ROM ON YOUR CUBOT C7:
WARNING: YOU ARE DOING THIS PROCESS ON YOUR OWN AND I DO NOT TAKE ANY RESPONSIBILITY IF
SOMETHING GOES WRONG WITH YOUR PHONE. YOU ARE FULLY RESPONSIBLE DOING THIS PROCEDURE.
1) Download the CUBOT C7 Stock rom from here:
Stock Rom: www.cubot.net/UploadFile/Soft/C7_root_Software.rar ------ (After downloading the file EXTRACT or UNZIP it)
Here you can find other tools for CUBOT C7 - http://www.cubot.net/Service.aspx (NOTE: This is not required)
2) Download this package it has the USB Driver and Flashing Tools. Install USB Driver...
http://www55.zippyshare.com/v/44295424/file.html
3) Be sure to have installed the correct drivers. For my SC6820-device I see 5 items in Win7-32bit-device-manager (ADB-Composite, 2 x
COM-ports, 2 x USB devices: all without exclamation marks). You can use the drivers from the package folder "SCI-android-usb-driver-jungo-
v4-.rar".
4) Disable just in case your Win7 firewall. (If you are using Windows XP, you don't have to do this step)
5) Launch "ChannelServer.exe" from package folder "CHANNELSERVER" and allow firewall if asked.
6) Start "ResearchDownload.exe" from package folder "ResearchDownload".
7) In ResearchDownload-application chose firmware with first button (for me: 20121006_c909_JF_EAHC_V12.PAC).----- This is the STOCK
ROM file that you have downloaded and Extracted it on STEP 1.
8) Be sure to SET the Baudrate-settings in ResearchDownload-Settings (second button). I recommend 115200.
9) Press the Start (Play) button in ResearchDownload-application (third button).
10) Turn off the phone.
11) Keep holding the "volume down"-key.
12) Without releasing the button "volume down" plug the usb-cord from phone to your PC (install the driver if not done before in step 2).
13) Keep holding down the Volume Down button..... The process of firmware-burning should start now in ResearchDownload-application and
take approximately 1 Minute.
11. Wait until the firmware-flashing has been finished (A green sign appeares + "Passed" is written in ResearchDownload-application).
12. Remove the battery, wait 20 seconds. Put battery back and turn on the phone (first boot may take a while but not more than 5 minutes).
Use this at your own risk.[/QUOTE]
t9500-b
z_man3007 said:
First, I would like to thank Pogodancer in millions for his STEP by STEP tutorial which helped me to load STOCK ROM on my CUBOT C7 chinese phone. I am sure this tutorial will help others to fix their CUBOT C7 phone. This tutorial is also good for PHONES with SpreadTrum SP6820 on Android 2.3.6/4.0.1 . (Make sure you have the right STOCK ROM for your phone).
Here is the link to Pogodancer's original Post:
http://forum.xda-developers.com/showthread.php?t=2018023&page=2
HOW TO LOAD STOCK ROM ON YOUR CUBOT C7:
WARNING: YOU ARE DOING THIS PROCESS ON YOUR OWN AND I DO NOT TAKE ANY RESPONSIBILITY IF
SOMETHING GOES WRONG WITH YOUR PHONE. YOU ARE FULLY RESPONSIBLE DOING THIS PROCEDURE.
1) Download the CUBOT C7 Stock rom from here:
Stock Rom: www.cubot.net/UploadFile/Soft/C7_root_Software.rar ------ (After downloading the file EXTRACT or UNZIP it)
Here you can find other tools for CUBOT C7 - http://www.cubot.net/Service.aspx (NOTE: This is not required)
2) Download this package it has the USB Driver and Flashing Tools. Install USB Driver...
http://www55.zippyshare.com/v/44295424/file.html
3) Be sure to have installed the correct drivers. For my SC6820-device I see 5 items in Win7-32bit-device-manager (ADB-Composite, 2 x
COM-ports, 2 x USB devices: all without exclamation marks). You can use the drivers from the package folder "SCI-android-usb-driver-jungo-
v4-.rar".
4) Disable just in case your Win7 firewall. (If you are using Windows XP, you don't have to do this step)
5) Launch "ChannelServer.exe" from package folder "CHANNELSERVER" and allow firewall if asked.
6) Start "ResearchDownload.exe" from package folder "ResearchDownload".
7) In ResearchDownload-application chose firmware with first button (for me: 20121006_c909_JF_EAHC_V12.PAC).----- This is the STOCK
ROM file that you have downloaded and Extracted it on STEP 1.
8) Be sure to SET the Baudrate-settings in ResearchDownload-Settings (second button). I recommend 115200.
9) Press the Start (Play) button in ResearchDownload-application (third button).
10) Turn off the phone.
11) Keep holding the "volume down"-key.
12) Without releasing the button "volume down" plug the usb-cord from phone to your PC (install the driver if not done before in step 2).
13) Keep holding down the Volume Down button..... The process of firmware-burning should start now in ResearchDownload-application and
take approximately 1 Minute.
11. Wait until the firmware-flashing has been finished (A green sign appeares + "Passed" is written in ResearchDownload-application).
12. Remove the battery, wait 20 seconds. Put battery back and turn on the phone (first boot may take a while but not more than 5 minutes).
Use this at your own risk.
Click to expand...
Click to collapse
hello, this firware works whit t9500-b ??
Hi has anyone the firmware of cubot c7 ....
N83 can't be rooted using tools like bin4ary , one click or zhuodashi because exploits used in such tools were patched in last Jelly Bean builds. To root Sanei N83, one has to unpack the original firmware, root it and repack. What I am going to do, is provide the rooted firmware and a simple howto:
1. Download and unpack this archive: Sanei N83 rooted firmware
2. Power off your tablet
3. With volume + and power pressed together, insert quickly the usb cable.
During this step, the screen should be off and the tablet should enter in flash mode. If for some reason the screen lights and the tablet begins the boot sequence, it means it's not in flash mode and you should start again from beginning. You might have to give it a few tries if you don't manage to press both buttons and insert usb cable in time.
Windows will detect new hardware. If the drivers don't automatically install, go to Device Manager, find a device with an exclamation mark, right click, choose update drivers and install drivers from drivers folder inside the archive.
4. With device in flash mode, open rkbatchtool. You should see a green square. If the color is different or you don't see any colored square at all, you either didn't install the correct drivers, or the device isn't in flash mode.
5. Choose rooted_firmware.img and press Upgrade.
6. If all goes well, you should have a Sanei N83 or Ampe A85 with the last rooted firmware.
Note: When I patched the firmware, I forgot to edit build.prop, so the tablet will start in chinese. To switch to english or other language, open setting, scroll down until you see a icon with an A in the left side of the screen, press it. In the right side of the screen choose the first option from top and you should see a list of languages.
Enjoy your rooted N83.
edit:
I modified ro.secure so adb root and adb remount should work.
Hello, does this tablet have GPS?
DeathArrow said:
N83 can't be rooted using tools like bin4ary , one click or zhuodashi because exploits used in such tools were patched in last Jelly Bean builds. To root Sanei N83, one has to unpack the original firmware, root it and repack. What I am going to do, is provide the rooted firmware and a simple howto:
1. Download and unpack this archive: Sanei N83 rooted firmware
2. Power off your tablet
3. With volume + and power pressed together, insert quickly the usb cable.
During this step, the screen should be off and the tablet should enter in flash mode. If for some reason the screen lights and the tablet begins the boot sequence, it means it's not in flash mode and you should start again from beginning. You might have to give it a few tries if you don't manage to press both buttons and insert usb cable in time.
Windows will detect new hardware. If the drivers don't automatically install, go to Device Manager, find a device with an exclamation mark, right click, choose update drivers and install drivers from drivers folder inside the archive.
4. With device in flash mode, open rkbatchtool. You should see a green square. If the color is different or you don't see any colored square at all, you either didn't install the correct drivers, or the device isn't in flash mode.
5. Choose rooted_firmware.img and press Upgrade.
6. If all goes well, you should have a Sanei N83 or Ampe A85 with the last rooted firmware.
Note: When I patched the firmware, I forgot to edit build.prop, so the tablet will start in chinese. To switch to english or other language, open setting, scroll down until you see a icon with an A in the left side of the screen, press it. In the right side of the screen choose the first option from top and you should see a list of languages.
Enjoy your rooted N83.
edit:
I modified ro.secure so adb root and adb remount should work.
Click to expand...
Click to collapse
I have been trying this method and I am getting stuck on the drivers working on the Ampe A85.
It will not allow the drivers to be installed on the unknown device in device manager.
Any Ideas?
DeathArrow said:
Note: When I patched the firmware, I forgot to edit build.prop, so the tablet will start in chinese. To switch to english or other language, open setting, scroll down until you see a icon with an A in the left side of the screen, press it. In the right side of the screen choose the first option from top and you should see a list of languages.
Click to expand...
Click to collapse
How could the .img file be edited and repacked, to edit/add stuff?
will this method work on a Sanei N82 model?
DeathArrow said:
N83 can't be rooted using tools like bin4ary , one click or zhuodashi because exploits used in such tools were patched in last Jelly Bean builds. To root Sanei N83, one has to unpack the original firmware, root it and repack. What I am going to do, is provide the rooted firmware and a simple howto:
1. Download and unpack this archive: Sanei N83 rooted firmware
2. Power off your tablet
3. With volume + and power pressed together, insert quickly the usb cable.
During this step, the screen should be off and the tablet should enter in flash mode. If for some reason the screen lights and the tablet begins the boot sequence, it means it's not in flash mode and you should start again from beginning. You might have to give it a few tries if you don't manage to press both buttons and insert usb cable in time.
Windows will detect new hardware. If the drivers don't automatically install, go to Device Manager, find a device with an exclamation mark, right click, choose update drivers and install drivers from drivers folder inside the archive.
4. With device in flash mode, open rkbatchtool. You should see a green square. If the color is different or you don't see any colored square at all, you either didn't install the correct drivers, or the device isn't in flash mode.
5. Choose rooted_firmware.img and press Upgrade.
6. If all goes well, you should have a Sanei N83 or Ampe A85 with the last rooted firmware.
Note: When I patched the firmware, I forgot to edit build.prop, so the tablet will start in chinese. To switch to english or other language, open setting, scroll down until you see a icon with an A in the left side of the screen, press it. In the right side of the screen choose the first option from top and you should see a list of languages.
Enjoy your rooted N83.
edit:
I modified ro.secure so adb root and adb remount should work.
Click to expand...
Click to collapse
Will this method work on a Sanei N82 model? I just got the N82 with 4.2.2.
Thanks
hey man, can this work to revive an ampe a85 tablet? i'm trying to revive one with the official firmware offered in the page but i was wondering if this could be easier, can you reupload the file?
I am not responsible for anything that happens in your life. Including what happens as result of following steps in this thread.
Hello all. After a long journey here, we figured a new thread would be in order for new comers not to have to read through fifty pages of information. Here you will find firmware to fix or update your Viking Pro. You will also find root methods, bootloader unlock and custom recoveries for this tablet. Lets start with ROOT...
Method 1: Kingroot. Kingroot works on this device. you can find it here. It's pretty straight forward, just download and install the apk and root.
Method 1.5: SuperSu. Kingroot works but it's not the best root out there. once you have root, follow the instructions here and Kingroot will be replaced with SuperSu.
Method 2: Su flash-able ZIP. This method requires you to follow steps in posts No. 3 and 4. Once you have custom recovery installed, You can flash This.
This method is a bit redundant. However, it does allow you to make a completely stock unooted backup of your rom before making any changes.
Check out posts 2, 3, 4 & 5 for the good stuff.
I'm gonna go ahead and thank everyone responsible and If I forgot to mention you, please don't hesitate to tell me and I will correct the situation:
@Bogram (Edited the bootloader so it could be unlocked on x.12.x versions)
@Jacube22 (Duplicated the method from Bogram to make the bootloader on x.9.x versions unlockable)
@vampirefo (Compiled a compatible CWM recovery for us)
@ewilley2008 (Found most of the firmware)
@mayzemay (Initial root thread)
@NepoRood
@jerryvail35
@Sir Jaxxy
@Snigglez
@Spartan Legionnaire
@bobl61
@csla
@Chainfire (For root)
FIRMWARE
There are two main branches of development for this tablet. It is very important to know which one you have because they are incompatible with each other. I personally bricked my first one with firmware from a x.9.x while mine is x.12.x. How do you check? Simple. In your build number, you can find it in "About tablet" in Settings or in the text at the top of the recovery screen. It's at the end of the number and it will look like 1.12.30, 10.12.20, 2.12.20, 1.9.1, 1.9.5, 10.9.1...etc The number in the middle is the important one.
Steps(Windows): For step 2 you will have five seconds. Preloader mode is only active for five seconds. So read first!
1- Extract the drivers to the destktop and open the device manager.
2- Plug your tablet in as such: turn off the tablet. Plug a male to male USB wire from the computer to the USB port on the tablet. now plug the power wire into the tablet. now very quickly in the device manager locate the new device and right click on it. select "update driver software" then select "browse my computer for driver software" and "browse". Now navigate to the driver folder, select the "CDC" folder and click on "OK" the "Next". The driver should install at this point. Once that is done, unplug the power cable from the tablet.
3- Extract the firmware and the sp flash tools to your desktop.
4- Start the sp flash tools and where it says scatter file loading click and navigate to the folder where you have the firmware and load the scatter file. You will see the firmware get loaded and a checksum check.
5- Once that is done, uncheck the preloader from the list and click on the download button.
6- Plug the power cable into your tablet. At this point the sp flash tool will load the firmware into the tablet. DO NOT UNPLUG ANYTHING UNTIL THE SP FLASH TOOLS SHOWS YOU A GREEN CHECK MARK TO INDICATE THAT IT IS DONE OR YOUR TABLET COULD BE HARD BRICKED AND UNREPAIRABLE.
7- Press the reset button and turn it on. Done!
Drivers: https://drive.google.com/file/d/0Bz4bOoJ_E5XzRWJCbGFINndmVmc/view?usp=sharing
SP Flash tools: https://drive.google.com/file/d/0Bz4bOoJ_E5Xzb0g3ZnlEcHE0bEE/view?usp=sharing
Firmware x.9.x:
RCT6303W87DK-ANDROID5.0-V37-V10.9.21-NFC-V2.3LA-20150820
RCT6303W87DK-ANDROID5.0-V32-1.9.1-20150409
Do not flash the preloader for the Surf1001 versions!!
Firrmware x.12.x:
RCT6303W87DK-ANDROID5.0-V77-V1.12.50-EMMC-user-Kingston-V6.1_20160316
RCT6303W87DK-ANDROID5.0-V70-V1.12.30-B-EMMC-user-Kingston-V6.1_20160121
SURF1001-ANDROID5.0-V11-V7.15.0_T8515B_V6.3_SAMSUNG2G_20151116 (Use method No.2 for root)
RCT6303W87DK-ANDROID5.0-V63-V10.12.0_T8515B_V6.3_PCDDR31G_20151106
SURF1001-ANDROID5.0-V07-V7.15.0_T8515B_V6.3_SAMSUNG2G_20151016
RCT6503W87DK-ANDROID5.0-V66-V20.12.20-B-Camera-2M_PCDDR_V6.3-20150928
RCT6303W87DK-ANDROID5.0-V63-V2.12.20-B-EMMC-user-Kingston-V6.1_20150811
Sources:
http://laurentiumihet.ro/technology/...test-versions/
http://www.needrom.com/download/mtk-...er-v5-1453-03/
http://pan.baidu.com/share/home?uk=2...ategory/type=0
http://baiduyun.57fx.cn/so-result.ht...7DK&type=share
And Google of course...
Bootloader
So the bootloader on this tablet is locked. To unlock the bootloader, in a perfect world, you would usually boot the tablet in fastboot and type the command "fastboot oem unlock" and then follow the instructions on the screen. However RCA did not code in the volume keys in fastboot mode so it was impossible to unlock the bootloader that way. So our friend Bogram edited the bootloader and now the volume keys are not needed. What swell guy eh?
Unlocking your phone’s bootloader completely wipes (formats) your Android phone’s internal memory including applications, contacts, SMS and MMS messages etc.
So what you need is a scatter file like this one and a patched bootloader like these: x.12.x or x.9.x .
You will also need ADB & Fastboot and the drivers.
1- Just like in the FIRMWARE section, install drivers and SP Flash Tools.
2- Open SP Flash Tools and load the scatter file and in the line where you see "uboot" on the right click in the blank field and a window will pop up. select the patched bootloader. Make sure it checked and click on the "Download" button.
3- Now plug the male to male USB cable and then plug in the power. SP flash tool will flash the bootloader and then show you a nice little green check mark.
4- At this point you need to unpack the adb folder from the RAR file and place it in the root of you hard drive(C: ) then open a command prompt and nvigate to you adb folder (cd c:\adb) and leave it there for just a second.
5- On your tablet unplug the power wire, hit the reset button in the back and boot it into recovery mode by pressing and holding the volume up and power buttons together until the RCA splash screen comes up then release them.
6- In recovery, use the volume keys to navigate to "reboot to bootloader" and use the power button to select.
7- At this point your tablet will be in fastboot and your computer should detect it and install the driver. If not, the driver is in the "Android" folder in the driver files you extracted.
8- In your command prompt you left opened earlier, type "fastboot oem unlock".
9-Your tablet will do some magic, summon a demon, banish it to the depths of hell, reboot a couple of times and then it will have a unlocked bootloader.
10- Done. now you ca move on the next post and flash recovery.
Bogram also created a tool that patches the bootloader automatically should you have a different version we don't know about or what not...
Code:
RCA LittleKernel Unlock Patcher
By Bogram (http://forum.xda-developers.com/member.php?u=7182821)
Tested models:
RCA Viking Pro (RCT6303W87DK), RCA Maven Pro (RCT6213W87DK)
USE THIS TOOL AT YOUR OWN RISK, NO WARRANTY IS PROVIDED.
License: http://www.gnu.org/licenses/gpl-3.0.html
Input file:
W:/HaxeToolkit/projects/patcher/lk.bin
Wrote to:
W:/HaxeToolkit/projects/patcher/lk_patched.bin
Press any key to exit.
https://drive.google.com/file/d/0Bz4bOoJ_E5XzSnJ2R3d2NkxlU0k/view?usp=sharing
RECOVERY
This section depends on a unlocked bootloader. If you did not unlock your bootloader in the previous post, do so before continuing to this one.
So what you need is a scatter file like this one and a recovery.
CWM + Carliv compiled by vampirefo: (x.9.x)Clockworkmod recovery (x.12.x)Clockworkmod recovery
TWRP V3.00 compiled by Neporood: (x.9.x)TWRP V3.00 recovery (x.12.x)TWRP V3.00 recovery(Coming soon)
- Open SP Flash tool and select the scatter file.
- in the recovery line, on the right side in the blank field, click and select your downloaded recovery.
- Click on the download button.
- Make sure your tablet is off, plug the USB cable first and then the power cable.
- SP Flash tool will flash the recovery and show you a lovely green check mark.
- Once that is done your recovery will be flashed.
** The stock system has a file in the system folder called "recovery-from-boot.p". this file flashes stock recovery randomly at boot so with a rooted system, navigate to the folder with a root capable explorer and delete the file so that your new recovery stays there.
** When rebooting from recovery, cwm will tell you to fix root. Don't. Select no every time.
For thos of you who want a file explorer in recovery, You can download this Aroma installer flashable
It's a nice tool to have...
Aroma comes from here: http://forum.xda-developers.com/showthread.php?t=1646108
ROMS
Not yet but soon.....
I'd swear I've seen all this somewhere before... lol
Good job, brother!
Now , let the roms...begin.....
woot ... just in time as I brought my Viking Pro home from Wallyworld Saturday night.
Any thoughts on ADB? I couldn't make it all the way through the other thread and eventually just gave up.... ended up figuring out Kingroot on my own and then just enabled ADB over wifi. Would much rather have a wired ADB solution as moving an APK (I'm a developer, duh) over wifi can be somewhat s-l-o-w.
Any plans to make a thread like this for the RCA Maven Pro (RCT6213W87DK)? It'd be really swell.
EDIT: Actually, with those sources you posted, I actually might be able to do this on my own.
thevypr said:
Any plans to make a thread like this for the RCA Maven Pro (RCT6213W87DK)? It'd be really swell.
EDIT: Actually, with those sources you posted, I actually might be able to do this on my own.
Click to expand...
Click to collapse
I've got a Maven, and I've already done the porting. I'll be posting a guide tomorrow morning sometime. For now, I've sent you a PM with links to the firmware. Check your firmware version, mine is V36-1.9.21 (as long as you have the "9", you should be ok) The zip file has everything in it, preloader, scatter, custom recovery, etc...
Maven Guide is up, find it here
Synman said:
woot ... just in time as I brought my Viking Pro home from Wallyworld Saturday night.
Any thoughts on ADB? I couldn't make it all the way through the other thread and eventually just gave up.... ended up figuring out Kingroot on my own and then just enabled ADB over wifi. Would much rather have a wired ADB solution as moving an APK (I'm a developer, duh) over wifi can be somewhat s-l-o-w.
Click to expand...
Click to collapse
Still working on adb... Trying to make a flashable ROM with the fixes... No timeframe tho..
smartmanvartan said:
Still working on adb... Trying to make a flashable ROM with the fixes... No timeframe tho..
Click to expand...
Click to collapse
I can't get the port(s) to light up under OSX. I've tried a couple build.prop changes, plugging in micro usb, usb type a, power connector, and various combinations but none of them appear to trigger registration of a usb device of any kind on the host machine.
I can't even get simple stuff like MTP to work.
Synman said:
I can't get the port(s) to light up under OSX. I've tried a couple build.prop changes, plugging in micro usb, usb type a, power connector, and various combinations but none of them appear to trigger registration of a usb device of any kind on the host machine.
I can't even get simple stuff like MTP to work.
Click to expand...
Click to collapse
Time is my issue but I'm looking at two things. there is a firmware package i found on the Chinese server for a tablet with the model number rct6603w47dk with the same board as the viking pro but with a 8163 instead of the 8127. i think its doable to port over to our tablet. it is android 6. also the maven pro(rct6213w87dk) which is really close to our tablet with the same board but a larger screen, has adb working on it...
You should be getting a reaction through the micro usb port... on windows it shows up as a malfunctioning device.
i get nothing when sniffing the USB bus on my MBP.
Synman said:
i get nothing when sniffing the USB bus on my MBP.
Click to expand...
Click to collapse
I does the same thing on Ubuntu 14.04, absolutely nothing shows with "lsusb" in the terminal, unless it's in fastboot mode. You can use fastboot to flash the device, if you don't have access to a Windows machine...
I tested the new 1.9.3 firmware on my tablet... and it just shows a black screen.
DO NOT FLASH IT. it didn't work
Jacube22 said:
I tested the new 1.9.3 firmware on my tablet... and it just shows a black screen.
DO NOT FLASH IT. it didn't work
Click to expand...
Click to collapse
Ill find you guys some newer software that boots...
What's the difference between sp_drive_v2.0_finally & mtk_sp_drivers_v2.0
Because I got the sp_drive install but having a problem with the mtk_sp , it keep popping up as incompatible software.... I'm stuck on the boot loader section
e923 said:
What's the difference between sp_drive_v2.0_finally & mtk_sp_drivers_v2.0
Because I got the sp_drive install but having a problem with the mtk_sp , it keep popping up as incompatible software.... I'm stuck on the boot loader section
Click to expand...
Click to collapse
What version of Windows are you running..the difference is the drivers are signed or unsigned.. This matters more on newer versions of Windows.