[Howto][ROM] Root Sanei N83/Ampe A85 dual core the easy way - Miscellaneous Android Development

N83 can't be rooted using tools like bin4ary , one click or zhuodashi because exploits used in such tools were patched in last Jelly Bean builds. To root Sanei N83, one has to unpack the original firmware, root it and repack. What I am going to do, is provide the rooted firmware and a simple howto:
1. Download and unpack this archive: Sanei N83 rooted firmware
2. Power off your tablet
3. With volume + and power pressed together, insert quickly the usb cable.
During this step, the screen should be off and the tablet should enter in flash mode. If for some reason the screen lights and the tablet begins the boot sequence, it means it's not in flash mode and you should start again from beginning. You might have to give it a few tries if you don't manage to press both buttons and insert usb cable in time.
Windows will detect new hardware. If the drivers don't automatically install, go to Device Manager, find a device with an exclamation mark, right click, choose update drivers and install drivers from drivers folder inside the archive.
4. With device in flash mode, open rkbatchtool. You should see a green square. If the color is different or you don't see any colored square at all, you either didn't install the correct drivers, or the device isn't in flash mode.
5. Choose rooted_firmware.img and press Upgrade.
6. If all goes well, you should have a Sanei N83 or Ampe A85 with the last rooted firmware.
Note: When I patched the firmware, I forgot to edit build.prop, so the tablet will start in chinese. To switch to english or other language, open setting, scroll down until you see a icon with an A in the left side of the screen, press it. In the right side of the screen choose the first option from top and you should see a list of languages.
Enjoy your rooted N83.
edit:
I modified ro.secure so adb root and adb remount should work.

Hello, does this tablet have GPS?

DeathArrow said:
N83 can't be rooted using tools like bin4ary , one click or zhuodashi because exploits used in such tools were patched in last Jelly Bean builds. To root Sanei N83, one has to unpack the original firmware, root it and repack. What I am going to do, is provide the rooted firmware and a simple howto:
1. Download and unpack this archive: Sanei N83 rooted firmware
2. Power off your tablet
3. With volume + and power pressed together, insert quickly the usb cable.
During this step, the screen should be off and the tablet should enter in flash mode. If for some reason the screen lights and the tablet begins the boot sequence, it means it's not in flash mode and you should start again from beginning. You might have to give it a few tries if you don't manage to press both buttons and insert usb cable in time.
Windows will detect new hardware. If the drivers don't automatically install, go to Device Manager, find a device with an exclamation mark, right click, choose update drivers and install drivers from drivers folder inside the archive.
4. With device in flash mode, open rkbatchtool. You should see a green square. If the color is different or you don't see any colored square at all, you either didn't install the correct drivers, or the device isn't in flash mode.
5. Choose rooted_firmware.img and press Upgrade.
6. If all goes well, you should have a Sanei N83 or Ampe A85 with the last rooted firmware.
Note: When I patched the firmware, I forgot to edit build.prop, so the tablet will start in chinese. To switch to english or other language, open setting, scroll down until you see a icon with an A in the left side of the screen, press it. In the right side of the screen choose the first option from top and you should see a list of languages.
Enjoy your rooted N83.
edit:
I modified ro.secure so adb root and adb remount should work.
Click to expand...
Click to collapse
I have been trying this method and I am getting stuck on the drivers working on the Ampe A85.
It will not allow the drivers to be installed on the unknown device in device manager.
Any Ideas?

DeathArrow said:
Note: When I patched the firmware, I forgot to edit build.prop, so the tablet will start in chinese. To switch to english or other language, open setting, scroll down until you see a icon with an A in the left side of the screen, press it. In the right side of the screen choose the first option from top and you should see a list of languages.
Click to expand...
Click to collapse
How could the .img file be edited and repacked, to edit/add stuff?

will this method work on a Sanei N82 model?
DeathArrow said:
N83 can't be rooted using tools like bin4ary , one click or zhuodashi because exploits used in such tools were patched in last Jelly Bean builds. To root Sanei N83, one has to unpack the original firmware, root it and repack. What I am going to do, is provide the rooted firmware and a simple howto:
1. Download and unpack this archive: Sanei N83 rooted firmware
2. Power off your tablet
3. With volume + and power pressed together, insert quickly the usb cable.
During this step, the screen should be off and the tablet should enter in flash mode. If for some reason the screen lights and the tablet begins the boot sequence, it means it's not in flash mode and you should start again from beginning. You might have to give it a few tries if you don't manage to press both buttons and insert usb cable in time.
Windows will detect new hardware. If the drivers don't automatically install, go to Device Manager, find a device with an exclamation mark, right click, choose update drivers and install drivers from drivers folder inside the archive.
4. With device in flash mode, open rkbatchtool. You should see a green square. If the color is different or you don't see any colored square at all, you either didn't install the correct drivers, or the device isn't in flash mode.
5. Choose rooted_firmware.img and press Upgrade.
6. If all goes well, you should have a Sanei N83 or Ampe A85 with the last rooted firmware.
Note: When I patched the firmware, I forgot to edit build.prop, so the tablet will start in chinese. To switch to english or other language, open setting, scroll down until you see a icon with an A in the left side of the screen, press it. In the right side of the screen choose the first option from top and you should see a list of languages.
Enjoy your rooted N83.
edit:
I modified ro.secure so adb root and adb remount should work.
Click to expand...
Click to collapse
Will this method work on a Sanei N82 model? I just got the N82 with 4.2.2.
Thanks

hey man, can this work to revive an ampe a85 tablet? i'm trying to revive one with the official firmware offered in the page but i was wondering if this could be easier, can you reupload the file?

Related

[How to/MTK65xx] ROOT, Backup & Flash (MTKDroidTools, Spflashtool, CWM) [MTK Only]

[How to/MTK65xx] ROOT, Backup & Flash (MTKDroidTools, Spflashtool, CWM) [MTK Only]
Hi
This is a guide to ROOT, backup and flash your MTK65xx or Other device (Supported devices: http://forum.xda-developers.com/apps/framaroot/framaroot-supported-devices-t2722980 all credits to alephzain) written by s7yler.
More guides & reviews on my Youtubechannel http://www.Youtube.com/s7yler and http://s7yler.blogspot.com
(Tools used are Framaroot, MTKDroidtools/CWM and SpflashTool)
I will try to write this guide in step by step, so everyone can understand it. This is for PC and will work with Windows 7.
-> All is done by your own risk! this is just a guide to help people with the tools and process. <-
How to ROOT the phone first
1. Get the latest Framaroot apk here http://forum.xda-developers.com/apps/framaroot/root-framaroot-one-click-apk-to-root-t2130276
2. Download it and install it on the phone, open the Framaroot app on the phone.
3. Let it be on Install SuperSU, and try the last method, if that dont work, then try one of the 2 others.
4. Then it should say success root, and now reboot the phone.
5. After reboot the phone should be ROOTED, download root checker from the Play store and verify that your rooted.
How to make a simple backup (not completly 1:1) of your stock ROM / MTK phone
1. You have you brand new MTK phone.
2. What I do first is to install all possible drivers. So you go to your PC and install these apps/drivers:
Snappea - http://www.snappea.com/windows
Pdanet drivers - http://pdanet.co/a/ (When it ask what device you have in the install process, just say "Other")
Mediatek Preloader USB VCOM Drivers - (Install file) http://www.mediafire.com/download/cypm22rgs2k83ji/MT6577+USB+VCOM+drivers.rar and here the raw drivers http://www.magicdriver.com/driver4214-ver_1.1123.0.html
For the Preloader VCOM drivers for Windows 8 please read here, and follow this:
http://thebroodle.com/android/install-mediatek-mt65xx-usb-vcom-drivers-windows-8-8-1/
3. On your MTK phone you must in "Developer Options" enable "USB debugging mode".
4. Now download MTK Droid Tools here http://forum.xda-developers.com/showpost.php?p=49597819&postcount=922
5. Start MTK Droid Tools, and connect your phone with the USB cable to the PC. (if Windows install some drivers, then let it install them automatically).
6. Now on the first page of MTK Droid Tools, it should display all infos about the phone when you connect it.
7. If the sqare is Green, then you have root shell and ready, if its not green, press the ROOT button to the right in MTK Droid tools.
8. Click the "IMEI/NVRAM" button and then Backup to backup your IMEI/NVRAM, the backup files will be inside of the MTK Droid Tools folder.
Also you can manually write down your IMEI number just in case it should be lost.
9. Now go to the tap "root, backup, recovery" (in MTK Droid Tools).
10. Click the Backup button, and it will create a complete backup of your ROM. (in the end it will ask, if you want to pack it, just answer no)
11. When it is finished then also click "To prepare blocks for FlashTool", that will convert the backup to be compatible with Spflashtool. (choose the files.md5 inside the backup folder)
12. After the backup is done it will be inside "backup" in the MTK Droid Tools folder. And inside it there will also be a new folder called "!Files_to_FlashTool" Inside there the files for Spflashtool is. So when loading your backup with Spflashtool you must load the scatter file from inside there.
13. Now to install CWM (clockworkmod recovery) In MTK Droidtools, choose "To use boot from phone" and click the "Recovery and Boot" button. It will ask you a lot, just say yes every time, and it will end of sending CWM recovery to the phone and reboot into it on the phone. After you see CWM on the phone you know it is done. You can switch the menu with the volume keys, and the power is the select button.
14. Inside CWM you can also do a complete backup of your phone (remember to have enough space, you can do the backup to the internal storage OR to the SDcard - try "backup" if that fails then choose instead "backup to external sd" or vice versa). I recommed doing that because CWM makes another backup than the one made with MTK Droid Tools. So if you should get problems or loose something, you can always run your CWM backup into your phone and it will be as before.
15. After your done the backup, copy the backup also to a safe place on your PC. Just in case!
16. So now your Rooted, have installed CWM recovery, have a IMEI/NVRAM backup and a backup for Spflash Tools plus CWM backup.
To make a 100% FULL 1:1 (more advanced) ReadBack ROM backup using SP FlashTool please check these guides here, and learn how to:
http://mmx-unite2.blogspot.de/2014/08/how-to-create-readback-backup.html
http://forum.gsmhosting.com/vbb/f60...artphone-how-read-backup-1656510/#post9415324
or here:
http://pinoyscreencast.net/how-to/g...-smartphones-using-spft-mtk-droid-root-tools/
To flash a backup or ROM with Spflashtool:
Disclaimer: Don't flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones you will have a brick even if you download these blocks read from phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM. I take no responsibility for any harm done while attempting this!
1. Go download Spflash tool here http://forum.xda-developers.com/showthread.php?t=1982576
Both version 3 or 5 should be good to use. If your having problems with one of them or they crash, try this newer version here: http://forum.xda-developers.com/showthread.php?t=2650125
2. Disconnect your phone if connected with USB to the PC, and turn OFF the phone completely, also take out the battery if possible (but can also work with the battery inside the phone, for phones with builtin battery).
2. When you now again connect the USB cable to the phone with the PC while the phone is still off, Windows should popup and beginn to install the MTK65XX Preloader Drivers, this only happens if you installed the Mediatek Preloader USB VCOM Drivers correct in Windows. After they successfully installed, disconnect the USB cable again.
2. Start Flash_tool.exe to start the program
3. Now hit the "Scatter-loading" button, and go to the backup or ROM, inside the folder "!Flash files Spflashtool" load the scatter.txt file. (ALWAYS only load a ROM that is 100% made for your phone, flashing a wrong ROM may make your phone non-bootable)
4. When the scatter file is loaded, it will show all the content in the Spflashtool window.
5. If you only need for example to flash the EBR files, you can deselect all the others. But remember that it must be same ROM or backup.
6. Hit the "Download" button in Spflashtool. Then there should be some pink lines with colors showing that it loads the files.
7. When it stopps to flash/load, connect your phone with the USB cable, remember the phone must be OFF (and without the battery inside if possible to remove). If nothing happens then maybe it is necessary to press at the same time with connect of a cable the camera or volume buttons. For example, hold the volume up button down, insert the USB cable, and then insert the battery (still holding the volume up button down) when you hear it connect in Windows and the colored lines begins to move, let go off the volume up button.
8. Now it should connect (maybe Windows install some drivers by now - the MTK65xx Preloader drivers) and it will in the end continue to flash in Spflashtool when the phone is found and connected. (If you get PMT has changed error, you need to change in SP Flash Tool from "Download Only" to "Firmware Upgrade" but you will need a backup that contains ALL files then including the cache and usrdata files, or it will not allow to flash. Also the phone will be formatted first with Firmware Upgrade, and then flashed.)
9. Now wait while it flashes all files, when it is done, a window will popup white a Green circle. Now you can disconnect the cable, close Splflashtool and reboot the phone. The phone should now boot up with the new ROM.
10. A good thing can be to do a full factory reset after your booted or do it in CWM, to clear all caches. But not necessary.
To enter Recovery or Download mode - turn phone completly off then
Download mode = vol up + pwr (hold both down for several seconds)
Recovery = vol down + pwr (hold both down for several seconds)
ROMs can be found on
http://needrom.com
http://pan.baidu.com/share/home?uk=2637246389#category/type=0
How to 1-CLICK-ROOT Mediatek 4.2 or 4.4 KitKat Smartphones and change iRoot to normal SuperSU
How to BACKUP / READBACK Mediatek MTK Smartphones with MTK Droid Tools / SP Flash Tool
Here a video how you use SP Flash Tool and flash a ROM (whole process, using Windows 7)
How to repair/change IMEI's with MAUI META on Mediatek Smartphones
s7yler said:
Hi
This is a guide to ROOT, backup and flash your MTK65xx device written by s7yler.
More guides & reviews on my Youtubechannel http://www.Youtube.com/s7yler
(Tools used are Framaroot, MTKDroidtools/CWM and SpflashTool)
I will try to write this guide in step by step, so everyone can understand it. This is for PC and will work with Windows 7.
-> All is done by your own risk! this is just a guide to help people with the tools and process. <-
How to ROOT the phone first
1. Get the latest Framaroot apk here http://forum.xda-developers.com/apps/framaroot/root-framaroot-one-click-apk-to-root-t2130276
2. Download it and install it on the phone, open the Framaroot app on the phone.
3. Let it be on Install SuperSU, and try the last method, if that dont work, then try one of the 2 others.
4. Then it should say success root, and now reboot the phone.
5. After reboot the phone should be ROOTED, download root checker from the Play store and verify that your rooted.
How to make a backup of your stock ROM / MTK phone
1. You have you brand new MTK phone.
2. What I do first is to install all possible drivers. So you go to your PC and install these apps/drivers:
Snappea - http://www.snappea.com/windows
Pdanet drivers - http://pdanet.co/a/ (When it ask what device you have in the install process, just say "Other")
Mediatek Preloader USB VCOM Drivers - http://www.magicdriver.com/driver4214-ver_1.1123.0.html
3. On your MTK phone you must in "Developer Options" enable "USB debugging mode".
4. Now download MTK Droid Tools here http://forum.xda-developers.com/showpost.php?p=49597819&postcount=922
5. Start MTK Droid Tools, and connect your phone with the USB cable to the PC. (if Windows install some drivers, then let it install them automatically).
6. Now on the first page of MTK Droid Tools, it should display all infos about the phone when you connect it.
7. If the sqare is Green, then you have root shell and ready, if its not green, press the ROOT button to the right in MTK Droid tools.
8. Click the "IMEI/NVRAM" button and then Backup to backup your IMEI/NVRAM, the backup files will be inside of the MTK Droid Tools folder.
Also you can manually write down your IMEI number just in case it should be lost.
9. Now go to the tap "root, backup, recovery" (in MTK Droid Tools).
10. Click the Backup button, and it will create a complete backup of your ROM.
11. When it is finished then also click "To prepare blocks for FlashTool", that will convert the backup to be compatible with Spflashtool.
12. After the backup is done it will be inside "backup" in the MTK Droid Tools folder. And inside it there will also be a new folder called "!Flash files Spflashtool" Inside there the files for Spflashtool is. So when loading your backup with Spflashtool you must load the scatter file from inside there.
13. Now to install CWM (clockworkmod recovery) In MTK Droidtools, choose "To use boot from phone" and click the "Recovery and Boot" button. It will ask you a lot, just say yes every time, and it will end of sending CWM recovery to the phone and reboot into it on the phone. After you see CWM on the phone you know it is done. You can switch the menu with the volume keys, and the power is the select button.
14. Inside CWM you can also do a complete backup of your phone (remember to have enough space, you can do the backup to the internal storage OR to the SDcard). I recommed doing that because CWM makes another backup than the one made with MTK Droid Tools. That is more complete. So if you should get problems or loose something, you can always run your CWM backup into your phone and it will be as before.
15. After your done the backup, copy the backup also to a safe place on your PC. Just in case!
16. So now your Rooted, have installed CWM recovery, have a IMEI/NVRAM backup and a backup for Spflash Tools plus CWM backup.
To flash a backup or ROM with Spflashtool:
1. Go download Spflash tool here http://forum.xda-developers.com/showthread.php?t=1982576
Both version 3 or 5 should be good to use. If your having problems with one of them, try another version.
2. Disconnect your phone if connected with USB to the PC, and turn OFF the phone completely, also take out the battery if possible (but can also work with the battery inside the phone, for phones with builtin battery).
2. Start Flash_tool.exe to start the program
3. Now hit the "Scatter-loading" button, and go to the backup or ROM, inside the folder "!Flash files Spflashtool" load the scatter.txt file. (ALWAYS only load a ROM that is 100% made for your phone, flashing a wrong ROM may make your phone non-bootable)
4. When the scatter file is loaded, it will show all the content in the Spflashtool window.
5. If you only need for example to flash the EBR files, you can deselect all the others. But remember that it must be same ROM or backup.
6. Hit the "Download" button in Spflashtool. Then there should be some lines with colors showing that it loads the files.
7. When it stopps to flash/load, connect your phone with the USB cable, remember the phone must be OFF.
8. Now it should connect (maybe Windows install some drivers by now - the MTK65xx Preloader drivers) and it will in the end continue to flash in Spflashtool when the phone is found and connected.
9. Now wait while it flashes all files, when it is done, a window will popup white a Green circle. Now you can disconnect the cable, close Splflashtool and reboot the phone. The phone should now boot up with the new ROM.
10. A good thing can be to do a full factory reset after your booted or do it in CWM, to clear all caches. But not necessary.
Click to expand...
Click to collapse
hey great guide man, but please have a mod change the title, it makes it sound like any phone could be rooted this way only to open it and be disapointed that its for MTK65xx only. i would do something like this
[How to][MTK65XX] ROOT, Backup & Flash (MTKDroidTools, Spflashtool, CWM)
Trozzul said:
hey great guide man, but please have a mod change the title, it makes it sound like any phone could be rooted this way only to open it and be disapointed that its for MTK65xx only. i would do something like this
[How to][MTK65XX] ROOT, Backup & Flash (MTKDroidTools, Spflashtool, CWM)
Click to expand...
Click to collapse
thank you to my friends so Root I do not know how to just flash the file with flash ebr tools, I do not know the use that is why I ask for help on using just to flash the two files ; thank you again.
I do not know how to use the software to just flash the two files.
and im a french user
Trozzul said:
hey great guide man, but please have a mod change the title, it makes it sound like any phone could be rooted this way only to open it and be disapointed that its for MTK65xx only. i would do something like this
[How to][MTK65XX] ROOT, Backup & Flash (MTKDroidTools, Spflashtool, CWM)
Click to expand...
Click to collapse
Hey sorry, I changed my text now. The ROOT part is not only for MTK phones, also other devices. Here is alephzains list of supported devices: http://forum.xda-developers.com/apps/framaroot/framaroot-supported-devices-t2722980
You also may try it on others, the worst there can happen is that it just says root failed, and not rooting the device. But then you at least have tried.
Rocfiles said:
thank you to my friends so Root I do not know how to just flash the file with flash ebr tools, I do not know the use that is why I ask for help on using just to flash the two files ; thank you again.
I do not know how to use the software to just flash the two files.
and im a french user
Click to expand...
Click to collapse
In Spflash tool load the scatter file from the backup or ROM directory where you also have all files including the modded EBR files, when loaded it will show all the content to flash, every line has a checkmark in front, uncheck everything but the EBR1 and EBR2. And then flash as I write in the guide. That way it will only flash the EBR1 and 2 to the phone.
Hope i can get this right
Hey whats up bro. Thanks for your efforts on helping with this forum. I have the hdc one max and it do not have a removable battery. Im trying to use sp flash tool to retore to stock with rom but i have no way of getting spft to recognize the device to start. Any solution?
MajorsCloset said:
Hey whats up bro. Thanks for your efforts on helping with this forum. I have the hdc one max and it do not have a removable battery. Im trying to use sp flash tool to retore to stock with rom but i have no way of getting spft to recognize the device to start. Any solution?
Click to expand...
Click to collapse
So you did install all the drivers I write about in my guide, and rebooted? Normally Spflash tool should recognize the phone after that. (and set the USB debugging mode to on?)
Thank you! Thank you! Thank you!
s7yler said:
So you did install all the drivers I write about in my guide, and rebooted? Normally Spflash tool should recognize the phone after that. (and set the USB debugging mode to on?)
Click to expand...
Click to collapse
thanks for everything bro. i manage to finally get the vcom driver installed. with a lil help from usbreview. i flashed the rom i downloaded from needrom like you suggested and bam im back in business. thanks alot. i managed to control the flickering/random button pressing by turning brightness up as a temporary fix. i will try a fix i just found, a little later.
MajorsCloset said:
thanks for everything bro. i manage to finally get the vcom driver installed. with a lil help from usbreview. i flashed the rom i downloaded from needrom like you suggested and bam im back in business. thanks alot. i managed to control the flickering/random button pressing by turning brightness up as a temporary fix. i will try a fix i just found, a little later.
Click to expand...
Click to collapse
I am glad that it worked for you. Does the Youtube app work? can you login on Youtube? with the needrom ROM? or how does the Gapps react on this ROM now?
s7yler said:
I am glad that it worked for you. Does the Youtube app work? can you login on Youtube? with the needrom ROM? or how does the Gapps react on this ROM now?
Click to expand...
Click to collapse
it may be just a update for bugs. the only difference i notice was a x to kill all apps but it still dont work. oh and more notification shortcuts. still cant login in into yourtube and i really need my google apps. i used your guide but i got the drivers from 4shared. i appreciate all your help for real. only if this device wasnt defected from jump with this flicker i would deal with it. i might sell it. smh. i really like this device.lol.
Hi!
For the last few days I was trying to find the right ROM for me. So I had to learn about MTK Tools and SP Flash tool and I even succeeded with loading different ROMs. What I did not succeed is to restore the original backup made with MTK tools. I followed the tutorial from the first post, the flashing operation ended OK but my smartphone (THL w200s) just wouldn't start. As a matter of fact it starts the beginning but after it passes the animated log it stops. I did not flash the CWM recovery on my device before creating the backup as I wanted to save a snapshot of the original ROM as it was from the factory. More than this, I installed a fresh ROM (I guess it was exactly the same with the default one), everything was OK, I rooted and made my settings (configure emails, etc.) and I made a backup with MTK tools. I had the same issue: I restored the backup with SP Flash Tools, flashing was OK but after that the phone would not start.
What am I doing wrong?
s7yler said:
Hi
This is a guide to ROOT, backup and flash your MTK65xx or Other device (Supported devices: http://forum.xda-developers.com/apps/framaroot/framaroot-supported-devices-t2722980 all credits to alephzain) written by s7yler.
More guides & reviews on my Youtubechannel http://www.Youtube.com/s7yler
(Tools used are Framaroot, MTKDroidtools/CWM and SpflashTool)
I will try to write this guide in step by step, so everyone can understand it. This is for PC and will work with Windows 7.
-> All is done by your own risk! this is just a guide to help people with the tools and process. <-
How to ROOT the phone first
1. Get the latest Framaroot apk here http://forum.xda-developers.com/apps/framaroot/root-framaroot-one-click-apk-to-root-t2130276
2. Download it and install it on the phone, open the Framaroot app on the phone.
3. Let it be on Install SuperSU, and try the last method, if that dont work, then try one of the 2 others.
4. Then it should say success root, and now reboot the phone.
5. After reboot the phone should be ROOTED, download root checker from the Play store and verify that your rooted.
How to make a simple backup of your stock ROM / MTK phone
1. You have you brand new MTK phone.
2. What I do first is to install all possible drivers. So you go to your PC and install these apps/drivers:
Snappea - http://www.snappea.com/windows
Pdanet drivers - http://pdanet.co/a/ (When it ask what device you have in the install process, just say "Other")
Mediatek Preloader USB VCOM Drivers - (Install file) http://www.mediafire.com/download/cypm22rgs2k83ji/MT6577+USB+VCOM+drivers.rar and here the raw drivers http://www.magicdriver.com/driver4214-ver_1.1123.0.html
3. On your MTK phone you must in "Developer Options" enable "USB debugging mode".
4. Now download MTK Droid Tools here http://forum.xda-developers.com/showpost.php?p=49597819&postcount=922
5. Start MTK Droid Tools, and connect your phone with the USB cable to the PC. (if Windows install some drivers, then let it install them automatically).
6. Now on the first page of MTK Droid Tools, it should display all infos about the phone when you connect it.
7. If the sqare is Green, then you have root shell and ready, if its not green, press the ROOT button to the right in MTK Droid tools.
8. Click the "IMEI/NVRAM" button and then Backup to backup your IMEI/NVRAM, the backup files will be inside of the MTK Droid Tools folder.
Also you can manually write down your IMEI number just in case it should be lost.
9. Now go to the tap "root, backup, recovery" (in MTK Droid Tools).
10. Click the Backup button, and it will create a complete backup of your ROM. (in the end it will ask, if you want to pack it, just answer no)
11. When it is finished then also click "To prepare blocks for FlashTool", that will convert the backup to be compatible with Spflashtool. (choose the files.md5 inside the backup folder)
12. After the backup is done it will be inside "backup" in the MTK Droid Tools folder. And inside it there will also be a new folder called "!Files_to_FlashTool" Inside there the files for Spflashtool is. So when loading your backup with Spflashtool you must load the scatter file from inside there.
13. Now to install CWM (clockworkmod recovery) In MTK Droidtools, choose "To use boot from phone" and click the "Recovery and Boot" button. It will ask you a lot, just say yes every time, and it will end of sending CWM recovery to the phone and reboot into it on the phone. After you see CWM on the phone you know it is done. You can switch the menu with the volume keys, and the power is the select button.
14. Inside CWM you can also do a complete backup of your phone (remember to have enough space, you can do the backup to the internal storage OR to the SDcard - try "backup" if that fails then choose instead "backup to external sd" or vice versa). I recommed doing that because CWM makes another backup than the one made with MTK Droid Tools. So if you should get problems or loose something, you can always run your CWM backup into your phone and it will be as before.
15. After your done the backup, copy the backup also to a safe place on your PC. Just in case!
16. So now your Rooted, have installed CWM recovery, have a IMEI/NVRAM backup and a backup for Spflash Tools plus CWM backup.
To make a more advanced & complete 1:1 ReadBack ROM backup using SP FlashTool please check this guide here:
http://forum.gsmhosting.com/vbb/f60...artphone-how-read-backup-1656510/#post9415324
or here:
http://pinoyscreencast.net/how-to/g...-smartphones-using-spft-mtk-droid-root-tools/
To flash a backup or ROM with Spflashtool:
Never needlessly Download preloader and DSP_BL blocks! It is always dangerous! On some models of phones you will have a brick even if you download these blocks read from phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.
1. Go download Spflash tool here http://forum.xda-developers.com/showthread.php?t=1982576
Both version 3 or 5 should be good to use. If your having problems with one of them, try another version.
2. Disconnect your phone if connected with USB to the PC, and turn OFF the phone completely, also take out the battery if possible (but can also work with the battery inside the phone, for phones with builtin battery).
2. When you now again connect the USB cable to the phone with the PC while the phone is still off, Windows should popup and beginn to install the MTK65XX Preloader Drivers, this only happens if you installed the Mediatek Preloader USB VCOM Drivers correct in Windows. After they successfully installed, disconnect the USB cable again.
2. Start Flash_tool.exe to start the program
3. Now hit the "Scatter-loading" button, and go to the backup or ROM, inside the folder "!Flash files Spflashtool" load the scatter.txt file. (ALWAYS only load a ROM that is 100% made for your phone, flashing a wrong ROM may make your phone non-bootable)
4. When the scatter file is loaded, it will show all the content in the Spflashtool window.
5. If you only need for example to flash the EBR files, you can deselect all the others. But remember that it must be same ROM or backup.
6. Hit the "Download" button in Spflashtool. Then there should be some pink lines with colors showing that it loads the files.
7. When it stopps to flash/load, connect your phone with the USB cable, remember the phone must be OFF (and without the battery inside if possible to remove). If nothing happens then maybe it is necessary to press at the same time with connect of a cable the camera or volume buttons. For example, hold the volume up button down, insert the USB cable, and then insert the battery (still holding the volume up button down) when you hear it connect in Windows and the colored lines begins to move, let go off the volume up button.
8. Now it should connect (maybe Windows install some drivers by now - the MTK65xx Preloader drivers) and it will in the end continue to flash in Spflashtool when the phone is found and connected.
9. Now wait while it flashes all files, when it is done, a window will popup white a Green circle. Now you can disconnect the cable, close Splflashtool and reboot the phone. The phone should now boot up with the new ROM.
10. A good thing can be to do a full factory reset after your booted or do it in CWM, to clear all caches. But not necessary.
To enter Recovery or Download mode - turn phone completly off then
Download mode = vol up + pwr (hold both down for several seconds)
Recovery = vol down + pwr (hold both down for several seconds)
ROMs can be found on
http://needrom.com
http://pan.baidu.com/share/home?uk=2637246389#category/type=0
Click to expand...
Click to collapse
thax a lot bro,.,.i tried so many ways to port CW<M to my spice Mi-436,.,bt never succeded
bt after reading your toturial i did it man!!!!
A TONSSSSS of thanks !!!!!
Shaunak Falconzz Pandey said:
thax a lot bro,.,.i tried so many ways to port CW<M to my spice Mi-436,.,bt never succeded
bt after reading your toturial i did it man!!!!
A TONSSSSS of thanks !!!!!
Click to expand...
Click to collapse
I am happy to hear that it worked for you thanks for your comment.
I'm friends with Ruth framaroot phone and then off ... then mtk droid software with admin access and I'll be left bottom blue square root, and after OK, now I'm off to re-using software I could not come up with the phone and check it again before going off the bright green and blue non Ruth ... WHenever the phone or out ROM Mikham CWR Rykhn and are forced to ROM Disturb mobile phone you like'm going to be all Fast boot he has to change imei number do so because they must complete phone mtk software up to took root after changing the number (phone number, I jumped backups without ....) time for the tell greenfield No refused'd action I called the representative has not taken a pay ..... not so mythical after a few moments she wants a ...
I will be grateful if anyone knows how to fix the flaw lead ...
All are according to the latest software version XDA
my phone.....huawei g700-u10
MTK Droid error message
s7yler said:
Hi
This is a guide to ROOT, backup and flash your MTK65xx or Other device (Supported devices: http://forum.xda-developers.com/apps/framaroot/framaroot-supported-devices-t2722980 all credits to alephzain) written by s7yler.
More guides & reviews on my Youtubechannel http://www.Youtube.com/s7yler
(Tools used are Framaroot, MTKDroidtools/CWM and SpflashTool)
I will try to write this guide in step by step, so everyone can understand it. This is for PC and will work with Windows 7.
-> All is done by your own risk! this is just a guide to help people with the tools and process. <-
How to ROOT the phone first
1. Get the latest Framaroot apk here http://forum.xda-developers.com/apps/framaroot/root-framaroot-one-click-apk-to-root-t2130276
2. Download it and install it on the phone, open the Framaroot app on the phone.
3. Let it be on Install SuperSU, and try the last method, if that dont work, then try one of the 2 others.
4. Then it should say success root, and now reboot the phone.
5. After reboot the phone should be ROOTED, download root checker from the Play store and verify that your rooted.
How to make a simple backup (not completly 1:1) of your stock ROM / MTK phone
1. You have you brand new MTK phone.
2. What I do first is to install all possible drivers. So you go to your PC and install these apps/drivers:
Snappea - http://www.snappea.com/windows
Pdanet drivers - http://pdanet.co/a/ (When it ask what device you have in the install process, just say "Other")
Mediatek Preloader USB VCOM Drivers - (Install file) http://www.mediafire.com/download/cypm22rgs2k83ji/MT6577+USB+VCOM+drivers.rar and here the raw drivers http://www.magicdriver.com/driver4214-ver_1.1123.0.html
3. On your MTK phone you must in "Developer Options" enable "USB debugging mode".
4. Now download MTK Droid Tools here http://forum.xda-developers.com/showpost.php?p=49597819&postcount=922
5. Start MTK Droid Tools, and connect your phone with the USB cable to the PC. (if Windows install some drivers, then let it install them automatically).
6. Now on the first page of MTK Droid Tools, it should display all infos about the phone when you connect it.
7. If the sqare is Green, then you have root shell and ready, if its not green, press the ROOT button to the right in MTK Droid tools.
8. Click the "IMEI/NVRAM" button and then Backup to backup your IMEI/NVRAM, the backup files will be inside of the MTK Droid Tools folder.
Also you can manually write down your IMEI number just in case it should be lost.
9. Now go to the tap "root, backup, recovery" (in MTK Droid Tools).
10. Click the Backup button, and it will create a complete backup of your ROM. (in the end it will ask, if you want to pack it, just answer no)
11. When it is finished then also click "To prepare blocks for FlashTool", that will convert the backup to be compatible with Spflashtool. (choose the files.md5 inside the backup folder)
12. After the backup is done it will be inside "backup" in the MTK Droid Tools folder. And inside it there will also be a new folder called "!Files_to_FlashTool" Inside there the files for Spflashtool is. So when loading your backup with Spflashtool you must load the scatter file from inside there.
13. Now to install CWM (clockworkmod recovery) In MTK Droidtools, choose "To use boot from phone" and click the "Recovery and Boot" button. It will ask you a lot, just say yes every time, and it will end of sending CWM recovery to the phone and reboot into it on the phone. After you see CWM on the phone you know it is done. You can switch the menu with the volume keys, and the power is the select button.
14. Inside CWM you can also do a complete backup of your phone (remember to have enough space, you can do the backup to the internal storage OR to the SDcard - try "backup" if that fails then choose instead "backup to external sd" or vice versa). I recommed doing that because CWM makes another backup than the one made with MTK Droid Tools. So if you should get problems or loose something, you can always run your CWM backup into your phone and it will be as before.
15. After your done the backup, copy the backup also to a safe place on your PC. Just in case!
16. So now your Rooted, have installed CWM recovery, have a IMEI/NVRAM backup and a backup for Spflash Tools plus CWM backup.
To make a 100% FULL 1:1 (more advanced) ReadBack ROM backup using SP FlashTool please check these guides here, and learn how to:
http://forum.gsmhosting.com/vbb/f60...artphone-how-read-backup-1656510/#post9415324
or here:
http://pinoyscreencast.net/how-to/g...-smartphones-using-spft-mtk-droid-root-tools/
To flash a backup or ROM with Spflashtool:
Disclaimer: Don't flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones you will have a brick even if you download these blocks read from phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM. I take no responsibility for any harm done while attempting this!
1. Go download Spflash tool here http://forum.xda-developers.com/showthread.php?t=1982576
Both version 3 or 5 should be good to use. If your having problems with one of them or they crash, try this newer version here: http://forum.xda-developers.com/showthread.php?t=2650125
2. Disconnect your phone if connected with USB to the PC, and turn OFF the phone completely, also take out the battery if possible (but can also work with the battery inside the phone, for phones with builtin battery).
2. When you now again connect the USB cable to the phone with the PC while the phone is still off, Windows should popup and beginn to install the MTK65XX Preloader Drivers, this only happens if you installed the Mediatek Preloader USB VCOM Drivers correct in Windows. After they successfully installed, disconnect the USB cable again.
2. Start Flash_tool.exe to start the program
3. Now hit the "Scatter-loading" button, and go to the backup or ROM, inside the folder "!Flash files Spflashtool" load the scatter.txt file. (ALWAYS only load a ROM that is 100% made for your phone, flashing a wrong ROM may make your phone non-bootable)
4. When the scatter file is loaded, it will show all the content in the Spflashtool window.
5. If you only need for example to flash the EBR files, you can deselect all the others. But remember that it must be same ROM or backup.
6. Hit the "Download" button in Spflashtool. Then there should be some pink lines with colors showing that it loads the files.
7. When it stopps to flash/load, connect your phone with the USB cable, remember the phone must be OFF (and without the battery inside if possible to remove). If nothing happens then maybe it is necessary to press at the same time with connect of a cable the camera or volume buttons. For example, hold the volume up button down, insert the USB cable, and then insert the battery (still holding the volume up button down) when you hear it connect in Windows and the colored lines begins to move, let go off the volume up button.
8. Now it should connect (maybe Windows install some drivers by now - the MTK65xx Preloader drivers) and it will in the end continue to flash in Spflashtool when the phone is found and connected.
9. Now wait while it flashes all files, when it is done, a window will popup white a Green circle. Now you can disconnect the cable, close Splflashtool and reboot the phone. The phone should now boot up with the new ROM.
10. A good thing can be to do a full factory reset after your booted or do it in CWM, to clear all caches. But not necessary.
To enter Recovery or Download mode - turn phone completly off then
Download mode = vol up + pwr (hold both down for several seconds)
Recovery = vol down + pwr (hold both down for several seconds)
ROMs can be found on
http://needrom.com
http://pan.baidu.com/share/home?uk=2637246389#category/type=0
Click to expand...
Click to collapse
------------------------------------------------------------------------------------------------------------
I'm receiving an error message "SU inaccessible" after hitting the ROOT icon. The phone is a No.1 S7 MTK6589.
I previously tried using the Frameroot app but it failed as well.
Any ideas what the problem might be and how to solve?
Thanks,
Ruby
UPDATE
I have updated the Original Post with a video now, that show the whole process how to flash and use SP Flash Tool.
As always, everything is done at your own risk. It is just a guide. This video is for education only.
Very Useful Tips
Hy Man Thanks 4 This Useful Tips. Very Impressed.I Like Xda VeryMuch.
Fun accident
Well here's my story.
I was trying to debrand some Huawei Y330-U05 in order to resell them. My first clue was to root the devices and remove all the Entel PCS crap, but I was unable to remove the Boot Splashscreen. So I looked over the net and I could not find a compatible ROM for my model. I downloaded a Y330-U01 ROM from Europe and I tried to flash it figuring that later I'd have to fix the 3G bands. FlashTools did not let me do that and I had the stupid idea to boot the biit.img and recovery.img from the U01 into the U05 with MTKdroidTools. Bricked the phone, and the only way to bring it back was to use the U01 ROM and flash it back. I changed my device from U05 to U01, like I wanted at first but I cant change the 3G bands and I don't have 3G connnection now.
I can't flash back the U05 backup ROMs I did from the phone before I started messing with them because the of the model mismatch (Phone now thinks it is a U01 version). And since there is no stock ROM for the U05 model to download, except for an UPDATE.APP from Movistar Mexico that phone refuses to accept, I'm afraid that if I reverse the whloe process I will end up with a bricked phone and no Stock ROM to bring it back.
Here comes the question. How do I force install a WRONG ROM into my phone? Remember: my Y330-U05 now thinks it is a Y330-U01.
Thanks a lot!
Blu Studio 5.0 C HD
Can the blu studio 5.0c hd be rooted this way? A bit scared to do it because this is my daily driver
SU Inaccessible error
Ruby_97 said:
------------------------------------------------------------------------------------------------------------
I'm receiving an error message "SU inaccessible" after hitting the ROOT icon. The phone is a No.1 S7 MTK6589.
I previously tried using the Frameroot app but it failed as well.
Any ideas what the problem might be and how to solve?
Thanks,
Ruby
Click to expand...
Click to collapse
i saw your screenshot and yellow box at the bottom clearly indicates that your device has not been rooted properly. adb still exists as secure region. it is said that your device should said to be rooted properly only when your device got adb insecure. However, if your device has locked bootloader, doing so, i.e. entering or making adb insecure may lead your device to dead boot, a stage from which there are only two ways to survive from:- JTAG/RIFF box OR by replacing motherboard!!!!
However, if your bootloader is unlocked and only if your device is dev friendly, following link may help you to get green box at the bottom of MTK Droid Root Tools indicating your device has proper root access.
However, i have successfully solved this error in my panasonic p81 by making adb insecure.
Though, Do this on your own risk....Remember again, making adb insecure may make your device FAIL!!!!
Head over to following link:-
http://forum.xda-developers.com/showthread.php?t=1687590
Thanks to dev Chainfire again for this wonderful application....

[ROOT][FIRMWARE][BOOTLOADER][RECOVERY] RCA Viking Pro (RCT6303W87DK) One Stop Shop!

I am not responsible for anything that happens in your life. Including what happens as result of following steps in this thread.
Hello all. After a long journey here, we figured a new thread would be in order for new comers not to have to read through fifty pages of information. Here you will find firmware to fix or update your Viking Pro. You will also find root methods, bootloader unlock and custom recoveries for this tablet. Lets start with ROOT...
Method 1: Kingroot. Kingroot works on this device. you can find it here. It's pretty straight forward, just download and install the apk and root.
Method 1.5: SuperSu. Kingroot works but it's not the best root out there. once you have root, follow the instructions here and Kingroot will be replaced with SuperSu.
Method 2: Su flash-able ZIP. This method requires you to follow steps in posts No. 3 and 4. Once you have custom recovery installed, You can flash This.
This method is a bit redundant. However, it does allow you to make a completely stock unooted backup of your rom before making any changes.
Check out posts 2, 3, 4 & 5 for the good stuff.
I'm gonna go ahead and thank everyone responsible and If I forgot to mention you, please don't hesitate to tell me and I will correct the situation:
@Bogram (Edited the bootloader so it could be unlocked on x.12.x versions)
@Jacube22 (Duplicated the method from Bogram to make the bootloader on x.9.x versions unlockable)
@vampirefo (Compiled a compatible CWM recovery for us)
@ewilley2008 (Found most of the firmware)
@mayzemay (Initial root thread)
@NepoRood
@jerryvail35
@Sir Jaxxy
@Snigglez
@Spartan Legionnaire
@bobl61
@csla
@Chainfire (For root)
FIRMWARE
There are two main branches of development for this tablet. It is very important to know which one you have because they are incompatible with each other. I personally bricked my first one with firmware from a x.9.x while mine is x.12.x. How do you check? Simple. In your build number, you can find it in "About tablet" in Settings or in the text at the top of the recovery screen. It's at the end of the number and it will look like 1.12.30, 10.12.20, 2.12.20, 1.9.1, 1.9.5, 10.9.1...etc The number in the middle is the important one.
Steps(Windows): For step 2 you will have five seconds. Preloader mode is only active for five seconds. So read first!
1- Extract the drivers to the destktop and open the device manager.
2- Plug your tablet in as such: turn off the tablet. Plug a male to male USB wire from the computer to the USB port on the tablet. now plug the power wire into the tablet. now very quickly in the device manager locate the new device and right click on it. select "update driver software" then select "browse my computer for driver software" and "browse". Now navigate to the driver folder, select the "CDC" folder and click on "OK" the "Next". The driver should install at this point. Once that is done, unplug the power cable from the tablet.
3- Extract the firmware and the sp flash tools to your desktop.
4- Start the sp flash tools and where it says scatter file loading click and navigate to the folder where you have the firmware and load the scatter file. You will see the firmware get loaded and a checksum check.
5- Once that is done, uncheck the preloader from the list and click on the download button.
6- Plug the power cable into your tablet. At this point the sp flash tool will load the firmware into the tablet. DO NOT UNPLUG ANYTHING UNTIL THE SP FLASH TOOLS SHOWS YOU A GREEN CHECK MARK TO INDICATE THAT IT IS DONE OR YOUR TABLET COULD BE HARD BRICKED AND UNREPAIRABLE.
7- Press the reset button and turn it on. Done!
Drivers: https://drive.google.com/file/d/0Bz4bOoJ_E5XzRWJCbGFINndmVmc/view?usp=sharing
SP Flash tools: https://drive.google.com/file/d/0Bz4bOoJ_E5Xzb0g3ZnlEcHE0bEE/view?usp=sharing
Firmware x.9.x:
RCT6303W87DK-ANDROID5.0-V37-V10.9.21-NFC-V2.3LA-20150820
RCT6303W87DK-ANDROID5.0-V32-1.9.1-20150409
Do not flash the preloader for the Surf1001 versions!!
Firrmware x.12.x:
RCT6303W87DK-ANDROID5.0-V77-V1.12.50-EMMC-user-Kingston-V6.1_20160316
RCT6303W87DK-ANDROID5.0-V70-V1.12.30-B-EMMC-user-Kingston-V6.1_20160121
SURF1001-ANDROID5.0-V11-V7.15.0_T8515B_V6.3_SAMSUNG2G_20151116 (Use method No.2 for root)
RCT6303W87DK-ANDROID5.0-V63-V10.12.0_T8515B_V6.3_PCDDR31G_20151106
SURF1001-ANDROID5.0-V07-V7.15.0_T8515B_V6.3_SAMSUNG2G_20151016
RCT6503W87DK-ANDROID5.0-V66-V20.12.20-B-Camera-2M_PCDDR_V6.3-20150928
RCT6303W87DK-ANDROID5.0-V63-V2.12.20-B-EMMC-user-Kingston-V6.1_20150811
Sources:
http://laurentiumihet.ro/technology/...test-versions/
http://www.needrom.com/download/mtk-...er-v5-1453-03/
http://pan.baidu.com/share/home?uk=2...ategory/type=0
http://baiduyun.57fx.cn/so-result.ht...7DK&type=share
And Google of course...
Bootloader
So the bootloader on this tablet is locked. To unlock the bootloader, in a perfect world, you would usually boot the tablet in fastboot and type the command "fastboot oem unlock" and then follow the instructions on the screen. However RCA did not code in the volume keys in fastboot mode so it was impossible to unlock the bootloader that way. So our friend Bogram edited the bootloader and now the volume keys are not needed. What swell guy eh?
Unlocking your phone’s bootloader completely wipes (formats) your Android phone’s internal memory including applications, contacts, SMS and MMS messages etc.
So what you need is a scatter file like this one and a patched bootloader like these: x.12.x or x.9.x .
You will also need ADB & Fastboot and the drivers.
1- Just like in the FIRMWARE section, install drivers and SP Flash Tools.
2- Open SP Flash Tools and load the scatter file and in the line where you see "uboot" on the right click in the blank field and a window will pop up. select the patched bootloader. Make sure it checked and click on the "Download" button.
3- Now plug the male to male USB cable and then plug in the power. SP flash tool will flash the bootloader and then show you a nice little green check mark.
4- At this point you need to unpack the adb folder from the RAR file and place it in the root of you hard drive(C: ) then open a command prompt and nvigate to you adb folder (cd c:\adb) and leave it there for just a second.
5- On your tablet unplug the power wire, hit the reset button in the back and boot it into recovery mode by pressing and holding the volume up and power buttons together until the RCA splash screen comes up then release them.
6- In recovery, use the volume keys to navigate to "reboot to bootloader" and use the power button to select.
7- At this point your tablet will be in fastboot and your computer should detect it and install the driver. If not, the driver is in the "Android" folder in the driver files you extracted.
8- In your command prompt you left opened earlier, type "fastboot oem unlock".
9-Your tablet will do some magic, summon a demon, banish it to the depths of hell, reboot a couple of times and then it will have a unlocked bootloader.
10- Done. now you ca move on the next post and flash recovery.
Bogram also created a tool that patches the bootloader automatically should you have a different version we don't know about or what not...
Code:
RCA LittleKernel Unlock Patcher
By Bogram (http://forum.xda-developers.com/member.php?u=7182821)
Tested models:
RCA Viking Pro (RCT6303W87DK), RCA Maven Pro (RCT6213W87DK)
USE THIS TOOL AT YOUR OWN RISK, NO WARRANTY IS PROVIDED.
License: http://www.gnu.org/licenses/gpl-3.0.html
Input file:
W:/HaxeToolkit/projects/patcher/lk.bin
Wrote to:
W:/HaxeToolkit/projects/patcher/lk_patched.bin
Press any key to exit.
https://drive.google.com/file/d/0Bz4bOoJ_E5XzSnJ2R3d2NkxlU0k/view?usp=sharing
RECOVERY
This section depends on a unlocked bootloader. If you did not unlock your bootloader in the previous post, do so before continuing to this one.
So what you need is a scatter file like this one and a recovery.
CWM + Carliv compiled by vampirefo: (x.9.x)Clockworkmod recovery (x.12.x)Clockworkmod recovery
TWRP V3.00 compiled by Neporood: (x.9.x)TWRP V3.00 recovery (x.12.x)TWRP V3.00 recovery(Coming soon)
- Open SP Flash tool and select the scatter file.
- in the recovery line, on the right side in the blank field, click and select your downloaded recovery.
- Click on the download button.
- Make sure your tablet is off, plug the USB cable first and then the power cable.
- SP Flash tool will flash the recovery and show you a lovely green check mark.
- Once that is done your recovery will be flashed.
** The stock system has a file in the system folder called "recovery-from-boot.p". this file flashes stock recovery randomly at boot so with a rooted system, navigate to the folder with a root capable explorer and delete the file so that your new recovery stays there.
** When rebooting from recovery, cwm will tell you to fix root. Don't. Select no every time.
For thos of you who want a file explorer in recovery, You can download this Aroma installer flashable
It's a nice tool to have...
Aroma comes from here: http://forum.xda-developers.com/showthread.php?t=1646108
ROMS
Not yet but soon.....
I'd swear I've seen all this somewhere before... lol
Good job, brother!
Now , let the roms...begin.....
woot ... just in time as I brought my Viking Pro home from Wallyworld Saturday night.
Any thoughts on ADB? I couldn't make it all the way through the other thread and eventually just gave up.... ended up figuring out Kingroot on my own and then just enabled ADB over wifi. Would much rather have a wired ADB solution as moving an APK (I'm a developer, duh) over wifi can be somewhat s-l-o-w.
Any plans to make a thread like this for the RCA Maven Pro (RCT6213W87DK)? It'd be really swell.
EDIT: Actually, with those sources you posted, I actually might be able to do this on my own.
thevypr said:
Any plans to make a thread like this for the RCA Maven Pro (RCT6213W87DK)? It'd be really swell.
EDIT: Actually, with those sources you posted, I actually might be able to do this on my own.
Click to expand...
Click to collapse
I've got a Maven, and I've already done the porting. I'll be posting a guide tomorrow morning sometime. For now, I've sent you a PM with links to the firmware. Check your firmware version, mine is V36-1.9.21 (as long as you have the "9", you should be ok) The zip file has everything in it, preloader, scatter, custom recovery, etc...
Maven Guide is up, find it here
Synman said:
woot ... just in time as I brought my Viking Pro home from Wallyworld Saturday night.
Any thoughts on ADB? I couldn't make it all the way through the other thread and eventually just gave up.... ended up figuring out Kingroot on my own and then just enabled ADB over wifi. Would much rather have a wired ADB solution as moving an APK (I'm a developer, duh) over wifi can be somewhat s-l-o-w.
Click to expand...
Click to collapse
Still working on adb... Trying to make a flashable ROM with the fixes... No timeframe tho..
smartmanvartan said:
Still working on adb... Trying to make a flashable ROM with the fixes... No timeframe tho..
Click to expand...
Click to collapse
I can't get the port(s) to light up under OSX. I've tried a couple build.prop changes, plugging in micro usb, usb type a, power connector, and various combinations but none of them appear to trigger registration of a usb device of any kind on the host machine.
I can't even get simple stuff like MTP to work.
Synman said:
I can't get the port(s) to light up under OSX. I've tried a couple build.prop changes, plugging in micro usb, usb type a, power connector, and various combinations but none of them appear to trigger registration of a usb device of any kind on the host machine.
I can't even get simple stuff like MTP to work.
Click to expand...
Click to collapse
Time is my issue but I'm looking at two things. there is a firmware package i found on the Chinese server for a tablet with the model number rct6603w47dk with the same board as the viking pro but with a 8163 instead of the 8127. i think its doable to port over to our tablet. it is android 6. also the maven pro(rct6213w87dk) which is really close to our tablet with the same board but a larger screen, has adb working on it...
You should be getting a reaction through the micro usb port... on windows it shows up as a malfunctioning device.
i get nothing when sniffing the USB bus on my MBP.
Synman said:
i get nothing when sniffing the USB bus on my MBP.
Click to expand...
Click to collapse
I does the same thing on Ubuntu 14.04, absolutely nothing shows with "lsusb" in the terminal, unless it's in fastboot mode. You can use fastboot to flash the device, if you don't have access to a Windows machine...
I tested the new 1.9.3 firmware on my tablet... and it just shows a black screen.
DO NOT FLASH IT. it didn't work
Jacube22 said:
I tested the new 1.9.3 firmware on my tablet... and it just shows a black screen.
DO NOT FLASH IT. it didn't work
Click to expand...
Click to collapse
Ill find you guys some newer software that boots...
What's the difference between sp_drive_v2.0_finally & mtk_sp_drivers_v2.0
Because I got the sp_drive install but having a problem with the mtk_sp , it keep popping up as incompatible software.... I'm stuck on the boot loader section
e923 said:
What's the difference between sp_drive_v2.0_finally & mtk_sp_drivers_v2.0
Because I got the sp_drive install but having a problem with the mtk_sp , it keep popping up as incompatible software.... I'm stuck on the boot loader section
Click to expand...
Click to collapse
What version of Windows are you running..the difference is the drivers are signed or unsigned.. This matters more on newer versions of Windows.

[GUIDE]RCA Maven Pro (RCT6213W87DK), Bootloader, Custom Recoveries, Firmware and Root

SPECIAL KNO'DIS: This Guide has been changed to refelct proper installation for both types of Maven Pro tablets, be Sure to follow the appropriate guide.
For the purpose of this guide, I'll assume you already have working ADB and Fastboot on your PC, if not, you'll need to set that up first. This guide doesn't cover installation of ether of those. If you're looking for the guide to the Viking Pro (RCT6303W87DK), go here.
KNO'DIS: I, OR ANYONE ELSE AT XDA, WILL NOT BE HELD RESPONSIBLE FOR "BRICKING" YOUR TABLET!! IF YOU MANAGE TO MAKE A BRICK, DUE TO YOUR "FUN-DA-MENTAL" INABILITY TO READ, GO BUILD A BBQ PIT WITH IT!!​ (Or ask for help, there's a lot of friendly people around here)​
So, without further ado, lets get started. First, you'll need to know which version of firmware your device is running, this can be found in 2 different ways. From a running device go to: Settings/About tablet and look at the Build number. Or you can boot into stock recovery and the firmware version will be at the top left of the screen.
You should see something like the following, and note the 2nd number after the 2nd "V":
Code:
RCT6213W87DK-ANDROID5.0-V37-V1.9.30 <-- This is x.9.x version of firmware
or
RCT6213W87DK-ANDROID5.0-V68-V1.12.30-B <-- This is x.12.x version of firmware
Now that you know which firmware you have, follow the approriate guide below. I've broken this post into 2 different sections, as each tablet is just a little bit different.
About the Bootloader​
This applies to both versions of firmware and tablet users. Turns out, the booloader doesn't have to be unlocked in order to install a custom recovery or root the device. So there's really no reason to unlock it, and I have removed that portion of this guide.
Installing MTK Preloader Signed Drivers​
Drivers located Here
x.9.x Versions
Steps (Windows 8/8.1/10): For step 2 you will have less than five seconds. Preloader mode is only active for a few seconds. So read first!
1- Extract the drivers to the Desktop and open the Device Manager ("right click" on the Start button, select "Device Manager")
2- Plug your tablet in as such: turn off the tablet. Plug in the micro USB on the tablet, the other to the USB port on the PC, now very quickly in the device manager locate the new device and right click on it. For me, it showed up under "Other devices" and read MT65XX.
3- Select "update driver software" then select "browse my computer for driver software" (make sure "Include subfolders" is selected.
4- Click "Browse..." and navigate to where you extracted the driver zip. You "should" be at the following path: Desktop/MTK Preloader Signed Drivers
5- Click on "OK" then "Next". The driver should install at this point. Once that is done, unplug the usb cable from the pc (I find it easier to just keep the micro in the tablet).
x.12.x Versions (Requires Full size Male-to-Male USB Cable)
Steps (Windows 8/8.1/10): For step 2 you will have less than five seconds. Preloader mode is only active for a few seconds. So read first!
1- Extract the drivers to the Desktop and open the Device Manager ("right click" on the Start button, select "Device Manager")
2- Plug your tablet in as such: turn off the tablet. Plug in the full size USB cable to both the tablet and the PC.
3- Plug the micro USB into the tablet, the other to another USB port on the PC, now very quickly in the device manager locate the new device and right click on it. For me, it showed up under "Other devices" and read MT65XX.
4- Select "update driver software" then select "browse my computer for driver software" (make sure "Include subfolders" is selected.
5- Click "Browse..." and navigate to where you extracted the driver zip. You "should" be at the following path: Desktop/MTK Preloader Signed Drivers
6- Click on "OK" then "Next". The driver should install at this point. Once that is done, unplug both USB cables from the PC (I find it easier to just keep them in the tablet).
Installing TWRP​
Firmware/TWRP Downloads
Maven x.9.x (Currently Contains: V37-1.9.30 and TWRP)
Maven x.12.x (Currently Contains: V63-V1.12.0-20150802 and V66-1.12.20-B-20150831 Firmware and TWRP)
Special Thanks to: @ShadowCX11 for testing for me.
Be sure you are using the appropriate TWRP for your version of firmware, and do the following:
1- Extract the firmware and the SP Flash Tool to your desktop.
2- Start the SP Flash Tool, and where it says "scatter file loading" click and navigate to the folder where you have the firmware and load the scatter file (depending on device, it could be in the "Images" folder).
3- Once that is done, uncheck everything, and select "recovery" only, from the list, navigate to the TWRP image file and click "Open", then click on the download button.
4- Plug the USB cable(s)* back into your PC. At this point the flash tool will load the recovery to the tablet. DO NOT UNPLUG ANYTHING UNTIL THE FLASH TOOL SHOWS YOU A GREEN CHECK MARK TO INDICATE THAT IT IS DONE, OR YOUR TABLET COULD BE HARD BRICKED AND IRREPARABLE.
5- After you get your check mark, unplug and boot into recovery, hold the Volume + and Power button. When splash screen comes up (the 2 dogs) release the power button.
6- Welcome to TWRP
*Remember, x.12.x requires 2 USB cables to work
ROOT​
You can get root by flashing the latest SuperSu zip file located here, be sure to download the flashable zip.
Otherwise, for root, you can use the KingRoot app located here, (get the apk, or "Download for Android") and if you don't want a Chinesse Super User app, you can replace it with the ChainFire SuperSu by going here.
NOTE: This method of replacing KingRoot with SuperSu no longer works properly, and results in a bricked device.
Device Tree
GitHub
CREDITS
@vampirefo (for the CWM Recovery and teaching me about TWRP, there would be no recoveries if it wasn't for him!)
@Bogram (for the lk.bin patch trick)
@smartmanvartan (for the flashing guide)
Reserved
Reserved #2
Hello! I've had my Maven Pro for a couple months now and I still haven't rooted it like I have with the rest of my devices. I'd love to do it too, but reviewing your instructions, I found that my version number is way different. V66-V1.12.20-B. will that version patch tool still work for it? is there an update that it's refusing to download? Thanks!
Edit: on top of this, i can't get it to even connect (step 2) with any of my microUSB cables. (they work with my other devices)
equinox13 said:
Hello! I've had my Maven Pro for a couple months now and I still haven't rooted it like I have with the rest of my devices. I'd love to do it too, but reviewing your instructions, I found that my version number is way different. V66-V1.12.20-B. will that version patch tool still work for it? is there an update that it's refusing to download? Thanks!
Edit: on top of this, i can't get it to even connect (step 2) with any of my microUSB cables. (they work with my other devices)
Click to expand...
Click to collapse
Ooh, a v12, sorry friend, lol. Make sure the tablet is off, and be ready with "Device Manager" open, the preloader only shows up for a bit, then it disappears. The patch tool should still work for you, but the TWRP recovery may not. If it doesn't, the CWM recovery will after I modify it, because it's non-touch.
If neither recovery works for you, you can give me a copy of your "boot.img" file, and I can convert TWRP or CWM to work on your tablet. Also, I've changed the guide up top to include other root methods.
If you have any trouble, by all mean, post, and I'll try to help you through it
Regards,
Nepo
EDIT:
A friend found some V12 firmware, and I'll be uploading it soon. I can get a boot.img file from it to make a recovery.
My maven pro is stuck in a bootloop after I rooted now I don't know what to do. I can't even shut it down
GartimusPrime said:
My maven pro is stuck in a bootloop after I rooted now I don't know what to do. I can't even shut it down
Click to expand...
Click to collapse
You can reflash firmware while it is in a bootloop, I've done this many times. If you have everything set up, drivers, SP Flash Tool, firmware, etc..
Do the following:
1) Startup the Flash Tool and Load your firmware, as described in the OP (be sure to "uncheck" the Preloader)
2) Plug in your micro USB cable to both the PC and the tablet
3) Press and hold the "Reset" button located on the back
4) Click the Download button, then let go of the reset button, it should start flashing the firmware.
If it doesn't the first time, retry steps 3 and 4. I've had it fail the first time before, but work on the second.
Good Luck and let me know how it goes. Also, if the battery is completely drained by the time you read this, just flash firmware normally (again, uncheck the preloader). The tablet has to be powered off to flash it anyway.
Regards
Nepo
So after reflashing my tablet (a Canadian V12 that had V68, and flashed to V66 trying to unlock the boot loader and install CWM), USB doesn't work. The port doesn't output any voltage, and neither does the keyboard connector. The tablet acts like nothing is there, as does the PS3 controller I tried. Also, before, Firmware Update would say there's no updated firmware. Now, it doesn't seem to do anything. I flashed every partition except preloader, MBR and ebr, and the sec partitions. Do I have to reflash again, or is there something else I can do?
On a completely different note, I tried flashing a patched lk.bin, and it failed with an error I don't remember (I had temporary access to a PC).
One more thing that was quite interesting to me. It seems if you reboot into recovery or bootloader from Android (APM+ or root), you're then able to access the recovery with Power + Vol. Up. Is this known, or was it a fluke?
ShadowCX11 said:
So after reflashing my tablet (a Canadian V12 that had V68, and flashed to V66 trying to unlock the boot loader and install CWM), USB doesn't work. The port doesn't output any voltage, and neither does the keyboard connector. The tablet acts like nothing is there, as does the PS3 controller I tried. Also, before, Firmware Update would say there's no updated firmware. Now, it doesn't seem to do anything. I flashed every partition except preloader, MBR and ebr, and the sec partitions. Do I have to reflash again, or is there something else I can do?
On a completely different note, I tried flashing a patched lk.bin, and it failed with an error I don't remember (I had temporary access to a PC).
One more thing that was quite interesting to me. It seems if you reboot into recovery or bootloader from Android (APM+ or root), you're then able to access the recovery with Power + Vol. Up. Is this known, or was it a fluke?
Click to expand...
Click to collapse
No USB is a new one on me, I wish I had a x.12 version of this tablet to test on (mine's x.9) I'd try a re-flash, this time, do everything but the preloader, the reason for not flashing a preloader is because it sometimes semi-bricks one of these tablets.
Interesting note, there was a guy on the Viking thread (RCT6303W87DK) that flashed CWM without unlocking his bootloader, and everything is working fine for him...
Regards,
Nepo
PS, Power + Vol Up is the standard way to enter recovery on this device (I have the Xposed APM+ apk installed too)
NepoRood said:
No USB is a new one on me, I wish I had a x.12 version of this tablet to test on (mine's x.9) I'd try a re-flash, this time, do everything but the preloader, the reason for not flashing a preloader is because it sometimes semi-bricks one of these tablets.
Interesting note, there was a guy on the Viking thread (RCT6303W87DK) that flashed CWM without unlocking his bootloader, and everything is working fine for him...
Regards,
Nepo
PS, Power + Vol Up is the standard way to enter recovery on this device (I have the Xposed APM+ apk installed too)
Click to expand...
Click to collapse
So just a quick question: Is the device /dev/recovery for sure recovery? I want to see if I can just use dd to flash recovery.
ShadowCX11 said:
So just a quick question: Is the device /dev/recovery for sure recovery? I want to see if I can just use dd to flash recovery.
Click to expand...
Click to collapse
Yes, to pull a copy from a running tablet you use dd, and the path is: /dev/recovery
So, I'd do it this way, using adb:
Code:
adb push NAME_OF_RECOVERY.img /data/local/tmp
# Wait for it, then type:
adb shell
#Followed by:
dd if=/data/local/tmp/NAME_OF_RECOVERY.img of=/dev/recovery
#After it finishes:
reboot recovery
Okay, I got CWM installed! Now to see if I can find a way to build TWRP...
ShadowCX11 said:
Okay, I got CWM installed! Now to see if I can find a way to build TWRP...
Click to expand...
Click to collapse
Great! Is the CWM in portrait or landscape? You can always try to port the one I built for the x.9's, just unpack stock recovery, unpack TWRP, swap out the prebuilt kernel and repack.
NepoRood said:
Great! Is the CWM in portrait or landscape? You can always try to port the one I built for the x.9's, just unpack stock recovery, unpack TWRP, swap out the prebuilt kernel and repack.
Click to expand...
Click to collapse
It's in landscape, and works quite well! I just like the touch interface a bit more. I'll try the kernel replacement.
ShadowCX11 said:
It's in landscape, and works quite well! I just like the touch interface a bit more. I'll try the kernel replacement.
Click to expand...
Click to collapse
I prefer TWRP as well, that's why I built it
The only reason I don't have one posted for x.12 users is I can't test it. If you get it to work properly, let me know and I'll add it to the OP so others can benefit. :good:
If not, I can do some builds for you to test, if you don't mind. I have the x.12 kernel in my repo
NepoRood said:
I prefer TWRP as well, that's why I built it
The only reason I don't have one posted for x.12 users is I can't test it. If you get it to work properly, let me know and I'll add it to the OP so others can benefit. :good:
If not, I can do some builds for you to test, if you don't mind. I have the x.12 kernel in my repo
Click to expand...
Click to collapse
Yeah, I can't figure out how to extract the kernel, because I don't usually have access to a PC. However, I'll take some testing builds if you can make them.
Also, back to the USB issue, a reflash of everything except preloader didn't fix it. However, checking the firmware update now tells me that this is the latest version (which is definitely wrong, since I had v68). It must be an incompatibility between the USA and Canadian variants. If you find a Canadian firm dump, can you send me a link?
---
Hmm, okay.
So I just took a look at the model number on my box, and it's RCT5213W87DKF. That extra letter is what changes this a bit. I'll try seeing what I can dig up in terms of OTA updates, and I'll keep posting about what I find.
---
Okay, so after a few packet captures, I found the tablet makes a GET request to http://tablet12.gyrodock.com:2300/OtaUpdater/android?device=RCT6213W87DK with the User-Agent rk29sdk/4.0, but the server returns a 404 page. When I do this in the browser, however, I get something quite peculiar happen, which interests me. Most of the other places on the site return a Tomcat 404 that has the path in the parenthesis. However, for the OTA URL, it just has empty parenthesis. POST requests to that URL return a 200 OK with no return data, which is also interesting. I'll keep hunting around.
Some people might not have a PC to run flash_tool on, so here's how you can flash recovery/uboot/mbr/ebr2/logo/sec_ro from within Android
I'll use recovery as an example. I'm using a V12 tablet, so steps might be different if you have a V9. I tried to make this guide as revision-agnostic as possible, so correct me if I mess something up.
Root your device. The method I use is KingRoot, because it doesn't require any weird things. You can uninstall KingRoot and flash SuperSU later.
Download a recovery image. Make sure if you have a V12 tablet, you download a recovery image for V12, and a V9 recovery for a V9 tablet, or you'll brick your recovery. I personally prefer TWRP, because it has more features and a nicer UI, but CWM works too.
Get shell access. You can use a terminal emulator.
Type in su, and give the terminal superuser access on your device.
Type in dd if=/sdcard/Download/mavenVY_XXX.img of=/dev/recovery, where Y is 9 or 12, and XXX is CWM or twrp3.0.2. This will flash the recovery image.
Finally, type in reboot recovery. This should reboot into your custom recovery! It might also enable Power + Vol Up access to recovery, however, this hasn't been confirmed.
All the other partitions are similar, just replace the references to recovery images with the respective file names for the raw partition, and /dev/recovery with /dev/[PARTITION]. You can NOT flash the android or usrdata partition while in Android or you'll most likely soft-brick your tablet, however, you can boot into TWRP and go to the terminal and do the flash. You must copy your disk images to /tmp when doing so however, or you'll probably lose the disk image during the flash, effectively causing a brick.
Hope this helps people out!
ShadowCX11 said:
I've found out that it seems the v12 tablets strictly enforce the checksums of partition images, so flashing a custom recovery or uboot does not work with flashtool.
Click to expand...
Click to collapse
Nice addition, but all you have to do is disable it in the Checksum.ini file (change the 1 to 0):
Code:
[IsEnableChecksum]
CHECKSUM_SWITCH=0
I did that for the v9 versions, but only uploaded the v12 firmware...
NepoRood said:
Nice addition, but all you have to do is disable it in the Checksum.ini file (change the 1 to 0):
Code:
[IsEnableChecksum]
CHECKSUM_SWITCH=0
I did that for the v9 versions, but only uploaded the v12 firmware...
Click to expand...
Click to collapse
Oh... makes sense...
ShadowCX11 said:
Oh... makes sense...
Click to expand...
Click to collapse
I'm glad you posted that info, it'll be super handy for folks that may not have access to a PC, or would rather use their device instead of a PC :good:

[Completed] I am having alot of problems uprading my routed k1 ideapad. What can I do?

Hi, I have a Lenovo K1 Ideapad (routed Android 3.1, 2.6.36.3 kernel version. ROM version: K1_A301_02_02_110930_CA ) and I am wanting to upgrade to a 4.2.2 Custom ROM or higher , but I can't get my tablet to go into recovery mode. I have tried doing it manually (hold Vol+ and vol- while holding power) but it goes to boot up and all I get at that point is an all black screen and my side swipe sensor LED's light up and stay on. The screen is black (fully). The recovery screen doesn't show up. Even after waiting for 30 minutes:. I can still boot it up normally, and it works. But no recovery. I have also tried adb, and various terminal apps, but they only reboot my tablet - regardless that I type "su reboot recovery" or the other similar commands. I have tried using ROM Manager, but the k1 isn't supported and when i press the reboot to recovery option, the k1 just reboots normally. I have rooted my k1 using this method:
1. Extract K1Root.rar to the directory of your choosing.
2. Connect your tablet to your PC with the USB cable.
3. With your tablet off, press POWER+VOL_UP+VOL_DOWN until the screen turns on, but displays only black.
4. Windows should detect the device, but not install drivers.
5. Go into device manager, select the APX device, choose update
drivers, and install the drivers from the aptly named NVFlash_Drivers
folder.
6. Open up the NVFLASH_HOME folder and run the file K1Flash.bat
7. Make your desired choices when prompted, and enjoy.
I downloaded superuser, ROM Manager, Busybox and root checker. and
checked the status of the root, and it said the root was successful. The tablet ran well. But as I played with it a bit I found that an alarming amount of apps were becoming incompatible (ones I had wanted before rooting n stuff). One game that was preloaded was no longer playable (until they updated it a few months later), More and more apps now aren't compatible with android 3.1 anymore, thus me trying a custom ROM. All instructions followed were for the K1 Ideapad. I am now noticing that various processes are now coming up as needing to be force closed, like the launcher process for example. I am at a loss of what to do. Do you have any advice? Thanks in advance!
Hello,
Welcome to XDA.
Most of the threads for your device are not very active anymore so try posting your issue in the forum linked below.
http://forum.xda-developers.com/android/help
The experts there may be able to help.
Register an XDA account to post and reply in the forums. Good luck.

[STOCK ROM][TOOL][ALCATEL] One touch tab 7 (T15)

Probably, if you are here then your alcatel touch is running with the Prestigio 7.0 multipad stock rom (PM3970), with no wireless and no accelerometer. Finally, I got my hands on the stock rom for the Alcatel one touch (T15). I would lay out the instructions that finally got this tab to work.
I stumbled upon it on an arabic forum called gsm-flash.com, tested it and thought of sharing it with you:
Download the AmLogic USB burning tool attached
Run the AmLogic app with administrative privileges
Power off your device
Connect the device using the USB cable
Press Power & Vol + until you see that your device is connected on Port 1 of the app
If all is good, goto step 10,if it didn’t then you need the drivers, proceed to step 8
Locate the Amlogic tool folder and then select the AmLogicUSBurningDrive folder
Select the win7 folder, locate the right installer and run it as admin
Go back to 3
In the Amlogic app, select File, then Import, locate the Alcatel-tab 7 archive you downloaded from below, pass it as it is, don’t UNZIP it
Optionally, you can pass the Serial number of the device if you want,and the CU reference in this case, T105-3AALEU1, I didn’t pass either of them, but the CU reference was added under the model number in the about tablet
Click Start
Wait for the process to complete
If successful proceed to step 15, otherwise, goto step 3 and repeat, which was what happened to me, I repeated it 3 times
Finally, the phone reboots with Alcatel One Touch logo, it will take some time
I was impatient, restarted it, and waited, then rebooted into recovery by using Power & Vol +, and made a factory reset
And Voila.Congrats on restoring your device
I apologize, don't have the right to post external URLS at the moment. Copy and paste without the quotes.
"https://drive.google.com/file/d/1s0wh5NZCNpxG2j7-QneQGYbeB30MlkJr/view?usp=sharing"
"https://drive.google.com/file/d/1CRdXmZ7uQ1LSpgWV5hI-7-3yBgltF7XF/view?usp=sharing"
Hope this helps anyone.
Regards,

Categories

Resources