CUBOT C7 --- Install USB Driver and Load STOCK ROM.

CUBOT C7 --- Install USB Driver and Load STOCK ROM. - Android General

First, I would like to thank Pogodancer in millions for his STEP by STEP tutorial which helped me to load STOCK ROM on my CUBOT C7 chinese phone. I am sure this tutorial will help others to fix their CUBOT C7 phone. This tutorial is also good for PHONES with SpreadTrum SP6820 on Android 2.3.6/4.0.1 . (Make sure you have the right STOCK ROM for your phone).
Here is the link to Pogodancer's original Post:
http://forum.xda-developers.com/showthread.php?t=2018023&page=2
HOW TO LOAD STOCK ROM ON YOUR CUBOT C7:
WARNING: YOU ARE DOING THIS PROCESS ON YOUR OWN AND I DO NOT TAKE ANY RESPONSIBILITY IF
SOMETHING GOES WRONG WITH YOUR PHONE. YOU ARE FULLY RESPONSIBLE DOING THIS PROCEDURE.
1) Download the CUBOT C7 Stock rom from here:
Stock Rom: www.cubot.net/UploadFile/Soft/C7_root_Software.rar ------ (After downloading the file EXTRACT or UNZIP it)
Here you can find other tools for CUBOT C7 - http://www.cubot.net/Service.aspx (NOTE: This is not required)
2) Download this package it has the USB Driver and Flashing Tools. Install USB Driver...
http://www55.zippyshare.com/v/44295424/file.html
3) Be sure to have installed the correct drivers. For my SC6820-device I see 5 items in Win7-32bit-device-manager (ADB-Composite, 2 x
COM-ports, 2 x USB devices: all without exclamation marks). You can use the drivers from the package folder "SCI-android-usb-driver-jungo-
v4-.rar".
4) Disable just in case your Win7 firewall. (If you are using Windows XP, you don't have to do this step)
5) Launch "ChannelServer.exe" from package folder "CHANNELSERVER" and allow firewall if asked.
6) Start "ResearchDownload.exe" from package folder "ResearchDownload".
7) In ResearchDownload-application chose firmware with first button (for me: 20121006_c909_JF_EAHC_V12.PAC).----- This is the STOCK
ROM file that you have downloaded and Extracted it on STEP 1.
8) Be sure to SET the Baudrate-settings in ResearchDownload-Settings (second button). I recommend 115200.
9) Press the Start (Play) button in ResearchDownload-application (third button).
10) Turn off the phone.
11) Keep holding the "volume down"-key.
12) Without releasing the button "volume down" plug the usb-cord from phone to your PC (install the driver if not done before in step 2).
13) Keep holding down the Volume Down button..... The process of firmware-burning should start now in ResearchDownload-application and
take approximately 1 Minute.
11. Wait until the firmware-flashing has been finished (A green sign appeares + "Passed" is written in ResearchDownload-application).
12. Remove the battery, wait 20 seconds. Put battery back and turn on the phone (first boot may take a while but not more than 5 minutes).
Use this at your own risk.

No cigar on Cubot C7
Tried, but did not work on Win7 64. Drivers install but Windows says the device would not run because signature is too old.
:crying:
z_man3007 said:
First, I would like to thank Pogodancer in millions for his STEP by STEP tutorial which helped me to load STOCK ROM on my CUBOT C7 chinese phone. I am sure this tutorial will help others to fix their CUBOT C7 phone. This tutorial is also good for PHONES with SpreadTrum SP6820 on Android 2.3.6/4.0.1 . (Make sure you have the right STOCK ROM for your phone).
Here is the link to Pogodancer's original Post:
http://forum.xda-developers.com/showthread.php?t=2018023&page=2
HOW TO LOAD STOCK ROM ON YOUR CUBOT C7:
WARNING: YOU ARE DOING THIS PROCESS ON YOUR OWN AND I DO NOT TAKE ANY RESPONSIBILITY IF
SOMETHING GOES WRONG WITH YOUR PHONE. YOU ARE FULLY RESPONSIBLE DOING THIS PROCEDURE.
1) Download the CUBOT C7 Stock rom from here:
Stock Rom: www.cubot.net/UploadFile/Soft/C7_root_Software.rar ------ (After downloading the file EXTRACT or UNZIP it)
Here you can find other tools for CUBOT C7 - http://www.cubot.net/Service.aspx (NOTE: This is not required)
2) Download this package it has the USB Driver and Flashing Tools. Install USB Driver...
http://www55.zippyshare.com/v/44295424/file.html
3) Be sure to have installed the correct drivers. For my SC6820-device I see 5 items in Win7-32bit-device-manager (ADB-Composite, 2 x
COM-ports, 2 x USB devices: all without exclamation marks). You can use the drivers from the package folder "SCI-android-usb-driver-jungo-
v4-.rar".
4) Disable just in case your Win7 firewall. (If you are using Windows XP, you don't have to do this step)
5) Launch "ChannelServer.exe" from package folder "CHANNELSERVER" and allow firewall if asked.
6) Start "ResearchDownload.exe" from package folder "ResearchDownload".
7) In ResearchDownload-application chose firmware with first button (for me: 20121006_c909_JF_EAHC_V12.PAC).----- This is the STOCK
ROM file that you have downloaded and Extracted it on STEP 1.
8) Be sure to SET the Baudrate-settings in ResearchDownload-Settings (second button). I recommend 115200.
9) Press the Start (Play) button in ResearchDownload-application (third button).
10) Turn off the phone.
11) Keep holding the "volume down"-key.
12) Without releasing the button "volume down" plug the usb-cord from phone to your PC (install the driver if not done before in step 2).
13) Keep holding down the Volume Down button..... The process of firmware-burning should start now in ResearchDownload-application and
take approximately 1 Minute.
11. Wait until the firmware-flashing has been finished (A green sign appeares + "Passed" is written in ResearchDownload-application).
12. Remove the battery, wait 20 seconds. Put battery back and turn on the phone (first boot may take a while but not more than 5 minutes).
Use this at your own risk.
Click to expand...
Click to collapse

Cubot C7
kostar said:
Tried, but did not work on Win7 64. Drivers install but Windows says the device would not run because signature is too old.
:crying:
Click to expand...
Click to collapse
Have you tried downloading the 64-bit driver from cubot dot net webside?. Here is the link
Darn, I cant post a link here.... go to cubot dot net website and click on services and download C7 USB Driver.
Once you download the file. Extract it and in there you will find X64 and X86 Folder. Use the drivers from X64 folder cause you are using 64-bit Windows 7.

Cant download the "C7_root_software.rar"
Ok so i just followed another tutorial on how to root the Cubot and unfortunatelz the telephone is stuck on bootcycle for whatever reason. I believe I didnt delete any critical application, but hey ... simply wont boot up.
Now I cant download the C7_root_software from the cubot-net website. Could anyone please upload the software somewhere else so I could download it and load stock ROM on my device. Would be a great help for me.
Thanks in advance to all of those concerned.

Worked
Hello guyz, an update after 2 hours. I did successfully load stock ROM on Cubot C7 from ebay. Exactly like the tutorial says. Thanks for the tutorial.
I just thought that as the download from cubot net is reaaaallly slow and I have even requested the ROM myself others may have the same problem so here you go a mega key for the files
C7_root_software: Hp2f3lp-UerqPjPs2pUu-jgzruFj59Dtz0B5ScLZSGE
Debug_Tool: ByLnzD1Q7XgPALRoYx35GnEnyIcsX_oIMCLlMyRSY7w
I cant post links and those are file keys to download from Mega.co.nz, simply search for "download from mega with file key".
Thanks for the tutorial and see you around.

CUBOT C7 - How to root
pijemcolu said:
Ok so i just followed another tutorial on how to root the Cubot and unfortunatelz the telephone is stuck on bootcycle for whatever reason. I believe I didnt delete any critical application, but hey ... simply wont boot up.
Now I cant download the C7_root_software from the cubot-net website. Could anyone please upload the software somewhere else so I could download it and load stock ROM on my device. Would be a great help for me.
Thanks in advance to all of those concerned.
Click to expand...
Click to collapse
The easiest way to root Cubot C7 is using Z4Root.apk tool. Download the pack from the web and copy over to your phones internal storage.
Here are the steps:
1) Install the Z4Root on your phone.
2) Run Z4Root on your phone.
3) First, run Temporary Root, You will see Superuser icon if it ran successfully.
4) Run Z4Root again and this time Run Permanent Root. You phone will boot and you will have your phone permanently rooted.
Thanks

Thank you so much for your help, follow the guide, all worked great, download was abit slow but I didn't worry about that knowing this is the only god dam tutrial I can find, thanks so much, had to register to make this post.

Thanks for the stock rom.I am now currently making a custom rom for the CUBOT C7

CUBOT C7
In case, anyone having trouble downloading the CUBOT C7 STOCK rom please download it from the following link. Thanks
https://mega.co.nz/#!5A1zURIK!BI-fQWVttxOcSDRd4jMTuzwl7xFcyxP9463-lq9GmqU

It's not working
Hello everyone,i did it just like above said,but it doesn't do anything,like the channel server is not connecting,and also the research download is not doing anything.
The drivers are installed,only a yellow triangle with information like signature,is there anyway to do something about it?
Windows 7 64bit,cubot c7 Android 2.3.9.
Now the reason is for the upgrading is that i have two issues,one with the signal is not wel,like cutting voice,from the mic of the phone,when talking through the phone but with the earphones it's much beter.second is that the bluetooth headset is only working for transfering audio like music to the BT earphone,and when talk to the phone i cannot hear or other people cannot hear me at all,it;s like muted the phone!!!!
Any one know about it,i cannot find anything here.
n.b.:tried 3 BT earphones
Also i see when i have a usim in the phone,it's like that there is 3G system!

Anybody?
Hello,i'm searching on the forum+net,but i cannot load again the update.zip from the site because there is no recovery option after install stock rom !Maybe someone has a solution for this?

Update the update.zip
gvanels said:
Hello everyone,i did it just like above said,but it doesn't do anything,like the channel server is not connecting,and also the research download is not doing anything.
The drivers are installed,only a yellow triangle with information like signature,is there anyway to do something about it?
Windows 7 64bit,cubot c7 Android 2.3.9.
Now the reason is for the upgrading is that i have two issues,one with the signal is not wel,like cutting voice,from the mic of the phone,when talking through the phone but with the earphones it's much beter.second is that the bluetooth headset is only working for transfering audio like music to the BT earphone,and when talk to the phone i cannot hear or other people cannot hear me at all,it;s like muted the phone!!!!
Any one know about it,i cannot find anything here.
n.b.:tried 3 BT earphones
Also i see when i have a usim in the phone,it's like that there is 3G system!
Click to expand...
Click to collapse
So after searching i did it!BUT in order to fix things(only fixed BT audio)there are many things that i don't can do....like a sync only apps,and after an restart i must put again a code,or the memory is out,and ofcourse no recovery menu,and other minor issues,How can i restore the rom that there is on there site/support.Maybe someone knows how to update the update.zip without recovery menu?

Thank you, on the very detailed,

Help please
Hello, I have a T999 dual sim (looks like a Xperia) it has sp6820a with 650mhz, Do you think I can use this ROM?
Please help me with this, I just kill a fake S3 i9300+ to follow another instructions.
Thank you so much from Argentina
QUOTE=z_man3007;37987768]First, I would like to thank Pogodancer in millions for his STEP by STEP tutorial which helped me to load STOCK ROM on my CUBOT C7 chinese phone. I am sure this tutorial will help others to fix their CUBOT C7 phone. This tutorial is also good for PHONES with SpreadTrum SP6820 on Android 2.3.6/4.0.1 . (Make sure you have the right STOCK ROM for your phone).
Here is the link to Pogodancer's original Post:
http://forum.xda-developers.com/showthread.php?t=2018023&page=2
HOW TO LOAD STOCK ROM ON YOUR CUBOT C7:
WARNING: YOU ARE DOING THIS PROCESS ON YOUR OWN AND I DO NOT TAKE ANY RESPONSIBILITY IF
SOMETHING GOES WRONG WITH YOUR PHONE. YOU ARE FULLY RESPONSIBLE DOING THIS PROCEDURE.
1) Download the CUBOT C7 Stock rom from here:
Stock Rom: www.cubot.net/UploadFile/Soft/C7_root_Software.rar ------ (After downloading the file EXTRACT or UNZIP it)
Here you can find other tools for CUBOT C7 - http://www.cubot.net/Service.aspx (NOTE: This is not required)
2) Download this package it has the USB Driver and Flashing Tools. Install USB Driver...
http://www55.zippyshare.com/v/44295424/file.html
3) Be sure to have installed the correct drivers. For my SC6820-device I see 5 items in Win7-32bit-device-manager (ADB-Composite, 2 x
COM-ports, 2 x USB devices: all without exclamation marks). You can use the drivers from the package folder "SCI-android-usb-driver-jungo-
v4-.rar".
4) Disable just in case your Win7 firewall. (If you are using Windows XP, you don't have to do this step)
5) Launch "ChannelServer.exe" from package folder "CHANNELSERVER" and allow firewall if asked.
6) Start "ResearchDownload.exe" from package folder "ResearchDownload".
7) In ResearchDownload-application chose firmware with first button (for me: 20121006_c909_JF_EAHC_V12.PAC).----- This is the STOCK
ROM file that you have downloaded and Extracted it on STEP 1.
8) Be sure to SET the Baudrate-settings in ResearchDownload-Settings (second button). I recommend 115200.
9) Press the Start (Play) button in ResearchDownload-application (third button).
10) Turn off the phone.
11) Keep holding the "volume down"-key.
12) Without releasing the button "volume down" plug the usb-cord from phone to your PC (install the driver if not done before in step 2).
13) Keep holding down the Volume Down button..... The process of firmware-burning should start now in ResearchDownload-application and
take approximately 1 Minute.
11. Wait until the firmware-flashing has been finished (A green sign appeares + "Passed" is written in ResearchDownload-application).
12. Remove the battery, wait 20 seconds. Put battery back and turn on the phone (first boot may take a while but not more than 5 minutes).
Use this at your own risk.[/QUOTE]

t9500-b
z_man3007 said:
First, I would like to thank Pogodancer in millions for his STEP by STEP tutorial which helped me to load STOCK ROM on my CUBOT C7 chinese phone. I am sure this tutorial will help others to fix their CUBOT C7 phone. This tutorial is also good for PHONES with SpreadTrum SP6820 on Android 2.3.6/4.0.1 . (Make sure you have the right STOCK ROM for your phone).
Here is the link to Pogodancer's original Post:
http://forum.xda-developers.com/showthread.php?t=2018023&page=2
HOW TO LOAD STOCK ROM ON YOUR CUBOT C7:
WARNING: YOU ARE DOING THIS PROCESS ON YOUR OWN AND I DO NOT TAKE ANY RESPONSIBILITY IF
SOMETHING GOES WRONG WITH YOUR PHONE. YOU ARE FULLY RESPONSIBLE DOING THIS PROCEDURE.
1) Download the CUBOT C7 Stock rom from here:
Stock Rom: www.cubot.net/UploadFile/Soft/C7_root_Software.rar ------ (After downloading the file EXTRACT or UNZIP it)
Here you can find other tools for CUBOT C7 - http://www.cubot.net/Service.aspx (NOTE: This is not required)
2) Download this package it has the USB Driver and Flashing Tools. Install USB Driver...
http://www55.zippyshare.com/v/44295424/file.html
3) Be sure to have installed the correct drivers. For my SC6820-device I see 5 items in Win7-32bit-device-manager (ADB-Composite, 2 x
COM-ports, 2 x USB devices: all without exclamation marks). You can use the drivers from the package folder "SCI-android-usb-driver-jungo-
v4-.rar".
4) Disable just in case your Win7 firewall. (If you are using Windows XP, you don't have to do this step)
5) Launch "ChannelServer.exe" from package folder "CHANNELSERVER" and allow firewall if asked.
6) Start "ResearchDownload.exe" from package folder "ResearchDownload".
7) In ResearchDownload-application chose firmware with first button (for me: 20121006_c909_JF_EAHC_V12.PAC).----- This is the STOCK
ROM file that you have downloaded and Extracted it on STEP 1.
8) Be sure to SET the Baudrate-settings in ResearchDownload-Settings (second button). I recommend 115200.
9) Press the Start (Play) button in ResearchDownload-application (third button).
10) Turn off the phone.
11) Keep holding the "volume down"-key.
12) Without releasing the button "volume down" plug the usb-cord from phone to your PC (install the driver if not done before in step 2).
13) Keep holding down the Volume Down button..... The process of firmware-burning should start now in ResearchDownload-application and
take approximately 1 Minute.
11. Wait until the firmware-flashing has been finished (A green sign appeares + "Passed" is written in ResearchDownload-application).
12. Remove the battery, wait 20 seconds. Put battery back and turn on the phone (first boot may take a while but not more than 5 minutes).
Use this at your own risk.
Click to expand...
Click to collapse
hello, this firware works whit t9500-b ??

Hi has anyone the firmware of cubot c7 ....

Related

[Q] How can I overclock my i5801?

Hi everyone,
I am a user of Samsung i5801. My device has been already rooted and ran with serveral root apps. Now, I would like to overclock my phone. I can only hold the frequency at 667Mhz with SetCPU, but I cannot set it to a higher one. How can I solve this problem? I really want to make my device running faster.
I am looking forward to your reply, thank you!

me 2!!
same fr me i want to overclock my rooted i5801...some 1 pls help!!
and if possible for the froyo version 2!!
iv searched the web but cant find any roms for the 15800 or i5801..

@unreal: yeh, even i waz searchin' lyk a hell for froyo on ma i5801 device but now no more search coz i already installed froyo on ma apollo i5801..
juz follow the steps:
What you will NEED!
1. A Samsung Galaxy 3 (DUH!).
2. The 2.2 Firmware
3. ODIN downloader
4. OPS files
5. A windows PC + samsung data cable.
download files:
firmware: I5800XXJPA.rar (108.32 MB)
Odin downloader : I5800_Odin_Multi_Downloader_v4.252.exe (435 KB)
ops files :apollo_0531.zip (207 Bytes)
then back up ya device with latest kies,afta back up juz reset to factory settings by typing *#*#7780#*#* in case not necessary though,
STEP 1
Download all the files above, and make sure you have the latest version of KIES software installed.
STEP 2
Extract the RAR to get a .tar file.
STEP 3
Open ODIN Downloader.
MAKE SURE you select One Package, Auto Reboot and Protect Ops checkboxes.
Select the Ops file (the file we downloaded earlier).
And finally select the tar package we extracted from the RAR earlier.
NOW CLOSE ODIN.
STEP 4
Backup you phone and data with the KIES software (after you are done exit KIES)
Turn OFF the Galaxy 3 and remove the Battery
Reinsert The Battery and Press the following buttons together
Home + Menu + Volume + Power
(it could be volume up / volume down / volume up+down , So, try all three)
Hold the buttons together till you see the downloading screen.
Step 5
Now Connect your Phone with your PC using the ORIGINAL DATA cable and wait for windows to finish installing the hardware
Once you get a prompt – “the device is ready to use”
Fire up ODIN DOWNLOADER (make sure the settings are same as before) Your phone will now show up connected in Com Port
STEP 6 (Final Step)
CLICK START and wait for process to finish, once done your device will automatically reboot and will have Android 2.2 running on it.
Enjoy!

I am a Hong Kong user, can I use this firmware update?

Overclocking
Dude you need a kernel that supports overclocking. obviously stock ROM doesn't suuport.
some links for kernels:
best out there : http://forum.xda-developers.com/showthread.php?t=997367
g3mod: http://forum.xda-developers.com/showthread.php?t=1252707
enjoy ...

[GUIDE] Sky a850 vega r3 rooting

Hello guy!Today i'll help you rooting your SKY VEGA R3 A850-a quadcore 1.5Ghz phone from Korea
Ok!Let's follow this tutorial,very easy!
farm9.staticflickr.com/8194/8096513506_25133a8bf2.jpg
Root:
- On your phone,be sure that you have enabled "USB debuging mode"(Seting>System>Developer options), and Unknown source(Seting>System>Security)
- Download and install LG USB DRIVER
- Download this file and unrar it,you'll have "RootOptimusG" folder
Link: http://www.fshare.vn/file/T6CD2X1ZKT/
- Run "RootOptimusG.bat", chose "y" then hit "Enter"
- Look up to your phone screen,select "Restore my data"
- Have a coffee ultil it completed, check SuperSU icon on the phone screen!
Credit: choimobile.vn team
Please click thanks if you found out it is usefull and visit our website at www.cafe.choimobile.vn or like us on facebook https://www.facebook.com/ChoiMobile.vn to encourge us
Thanks!
we are porting Clockwork mod recovery,follow this topic to update our latest develop
Sent from my SHV-E140L using xda app-developers app

Any ideas where to buy this phone online?

thanks man!!! i just need this!!!

nice!
more reason to get this phone, but i'm still getting more info on the freq if it can work in either China or Philippines.
thanks

A850 CWM
Here is a CWM for A850, creadit to bbs.wpcnn.com for this one.
Download the file from here: http://www.mediafire.com/download.php?lkqaspemne2l0o3
Copy this file to ADB directory
1. Make sure that fastboot.exe is placed in ABD folder
2. Power off your phone
3. Hold Vol - keep it held, hold power button and wait for the phone to boot in fastboot mode
4. Connect USB cable and run the following command: fastboot flash recovery recovery.img
5. All done
In order to boot in recovery- Power off phone then Hold Vol + keep it held, hold power button.

Need help.
how do you run it ?,went i run the file, no msg appear on the phone ?
edit
got the root to work :laugh: :victory:
Thank you

If I don have adb how? I duno how to do adb...
Sent from my IM-A850L using xda app-developers app

A850L 4.1.2 SMS fix, let try
choimobile.vn/threads/a850l-rom-jb-4-1-2-full-tieng-viet-fix-tin-nhan-sms-3g-sky-im-a850l-a850.1916

There is an update 4.1.2 in march13. Can it be rooted using the same method. Using a850s

I tried this method but it doesn't work on my A850K running 4.1.2. After I confirm on the phone data restore nothing happens. Because I didn't find LG Drivers I installed Vega USB Drivers. If anyone succedeed rooting 4.1.2 please tell me.

Whoever wants root for JB follow below:
(I will not be responsible for any bricked device, so try this on your own risk)
Download the usb driver from below:
For K version: http://file.isky.co.kr/upload/software/USB/IMA850K_USBDriver.zip
For L version: http://file.isky.co.kr/upload/software/USB/IMA850L_USBDriver.zip
For S version: http://file.isky.co.kr/upload/software/USB/IMA850S_USBDriver.zip
Download Recovery Below:
https://vkl.box.com/s/rlrm9ehql8d5h86jo60r
Download Root zip below:
850K : http://dl.dropbox.com/u/51675047/Sky Vega R3/Jelly Bean/A850K_Root_JB_2.12_10-4-2013.zip
850L: https://dl.dropboxusercontent.com/u/51675047/Sky Vega R3/Jelly Bean/A850L_Root_JB_2.11_23-4-2013.zip
850S: https://dl.dropboxusercontent.com/u/51675047/Sky Vega R3/Jelly Bean/A850S_Root_JB_2.15_23-4-2013.zip
HOW TO ROOT:
1. Install USB drivers and enable USB debugging on the phone. (Choose the one applicable for your phone K, L or S)
2. Copy the root Zip file to the sd card (USE THE CORRECT FILE FOR VERSION S, L, OR K)
3. Power off phone, hold the VOL+ , VOL- and Power button (all three together)
4. Scroll down to fastboot using volume keys and press power key to select fastboot. (wait for computer to install the driver)
5. Run the "Install recovery from fastboot" from the "IM-A850_Recovery_All in one_06-4-2013.rar"
6. Select the recovery you want to install (I chose 8) select 8 and press enter.
7. select "install zip from sd card" using volume keys and select it using power key then select "choose zip from sdcard"
8. select the file according to your version and select using power key and then confirm.
9. Reboot phone.
Your phone is rooted! Enjoy

papa.khan123 said:
Whoever wants root for JB follow below:
(I will not be responsible for any bricked device, so try this on your own risk)
Download the usb driver from below:
For K version: http://file.isky.co.kr/upload/software/USB/IMA850K_USBDriver.zip
For L version: http://file.isky.co.kr/upload/software/USB/IMA850L_USBDriver.zip
For S version: http://file.isky.co.kr/upload/software/USB/IMA850S_USBDriver.zip
Download Recovery Below:
https://vkl.box.com/s/rlrm9ehql8d5h86jo60r
Download Root zip below:
850K : http://dl.dropbox.com/u/51675047/Sky Vega R3/Jelly Bean/A850K_Root_JB_2.12_10-4-2013.zip
850L: https://dl.dropboxusercontent.com/u/51675047/Sky Vega R3/Jelly Bean/A850L_Root_JB_2.11_23-4-2013.zip
850S: https://dl.dropboxusercontent.com/u/51675047/Sky Vega R3/Jelly Bean/A850S_Root_JB_2.15_23-4-2013.zip
HOW TO ROOT:
1. Install USB drivers and enable USB debugging on the phone. (Choose the one applicable for your phone K, L or S)
2. Copy the root Zip file to the sd card (USE THE CORRECT FILE FOR VERSION S, L, OR K)
3. Power off phone, hold the VOL+ , VOL- and Power button (all three together)
4. Scroll down to fastboot using volume keys and press power key to select fastboot. (wait for computer to install the driver)
5. Run the "Install recovery from fastboot" from the "IM-A850_Recovery_All in one_06-4-2013.rar"
6. Select the recovery you want to install (I chose 8) select 8 and press enter.
7. select "install zip from sd card" using volume keys and select it using power key then select "choose zip from sdcard"
8. select the file according to your version and select using power key and then confirm.
9. Reboot phone.
Your phone is rooted! Enjoy
Click to expand...
Click to collapse
Man u're gr8! It worked like a charm! Thanks a lot!!! You made my day!!!

Whoever wants root for JB follow below:
(I will not be responsible for any bricked device, so try this on your own risk)
Download the usb driver from below:
For K version: http://file.isky.co.kr/upload/softwa..._USBDriver.zip
For L version: http://file.isky.co.kr/upload/softwa..._USBDriver.zip
For S version: http://file.isky.co.kr/upload/softwa..._USBDriver.zip
Download Recovery Below:
https://vkl.box.com/s/rlrm9ehql8d5h86jo60r
Download Root zip below:
850K : http://dl.dropbox.com/u/51675047/Sky..._10-4-2013.zip
850L: https://dl.dropboxusercontent.com/u/..._23-4-2013.zip
850S: https://dl.dropboxusercontent.com/u/..._23-4-2013.zip
HOW TO ROOT:
1. Install USB drivers and enable USB debugging on the phone. (Choose the one applicable for your phone K, L or S)
2. Copy the root Zip file to the sd card (USE THE CORRECT FILE FOR VERSION S, L, OR K)
3. Power off phone, hold the VOL+ , VOL- and Power button (all three together)
4. Scroll down to fastboot using volume keys and press power key to select fastboot. (wait for computer to install the driver)
5. Run the "Install recovery from fastboot" from the "IM-A850_Recovery_All in one_06-4-2013.rar"
6. Select the recovery you want to install (I chose 8) select 8 and press enter.
7. select "install zip from sd card" using volume keys and select it using power key then select "choose zip from sdcard"
8. select the file according to your version and select using power key and then confirm.
9. Reboot phone.
Your phone is rooted! Enjoy
Click to expand...
Click to collapse
sorry for the newb question, but this will not only root my phone but install a custom recovery that i can use on installing custom roms?

sethxavier said:
sorry for the newb question, but this will not only root my phone but install a custom recovery that i can use on installing custom roms?
Click to expand...
Click to collapse
Yes it will install custom recovery on your phone and you can install custom roms (if there are any good ROMS out there which are better then stock).
But I wouldnt suggest trying any other ROMS for 3 reasons;
1. The bootloader of a lot of the Sky-850 variants are locked so you might brick your phone by trying to install another rom (I did once took me a good 5 hours to bring it back to life)
2. They are all in Chinese and Vietnamese so you can accidentally flash a wrong ROM without Knowing the right one.
3. None of these ROMS out there are any better then the stock one, not even close so you better stick to the Stock ROM.

papa.khan123 said:
Yes it will install custom recovery on your phone and you can install custom roms (if there are any good ROMS out there which are better then stock).
But I wouldnt suggest trying any other ROMS for 3 reasons;
1. The bootloader of a lot of the Sky-850 variants are locked so you might brick your phone by trying to install another rom (I did once took me a good 5 hours to bring it back to life)
2. They are all in Chinese and Vietnamese so you can accidentally flash a wrong ROM without Knowing the right one.
3. None of these ROMS out there are any better then the stock one, not even close so you better stick to the Stock ROM.
Click to expand...
Click to collapse
I've got an A850S, and the only reason why im looking for a custom ROM is for the SMS fix, I'm using the phone outside korea you see. I'm actually looking for a modded stock rom for the SMS fix, or like a patch i can install for the sms fix, but haven't found any yet.

sethxavier said:
I've got an A850S, and the only reason why im looking for a custom ROM is for the SMS fix, I'm using the phone outside korea you see. I'm actually looking for a modded stock rom for the SMS fix, or like a patch i can install for the sms fix, but haven't found any yet.
Click to expand...
Click to collapse
I also have the S version, Just Install Go SMS or Pansi SMS from the market. You will be good to go.
You can also root the device using the method above and freeze the stock messaging app (which I would not recommend for you).
So the best way is Install a good messaging app from the market and hide your stock messaging app using the hide feature in the app drawer.

papa.khan123 said:
I also have the S version, Just Install Go SMS or Pansi SMS from the market. You will be good to go.
You can also root the device using the method above and freeze the stock messaging app (which I would not recommend for you).
So the best way is Install a good messaging app from the market and hide your stock messaging app using the hide feature in the app drawer.
Click to expand...
Click to collapse
I know what you mean by freezing the stock messaging app, thing is, if i use go sms or whatever sms app, im able to send messages with 160 characters fine, but anything more than that, it says unable to send message at this time, please wait until the service becomes available. I can set handcent to break the message into 2 separate ones, but id like it to be just one message if you know what i mean. (sorry kinda OC)

i try 2 machine but both cannot detect the driver when i plug in the phone a850s, both were 64 bits with windows 7 and window xp machine. i have install the driver given but it just cannot find the sky driver . i cannot reinstall the driver as it will prompt me i had already done so. please help

mrdaris said:
i try 2 machine but both cannot detect the driver when i plug in the phone a850s, both were 64 bits with windows 7 and window xp machine. i have install the driver given but it just cannot find the sky driver . i cannot reinstall the driver as it will prompt me i had already done so. please help
Click to expand...
Click to collapse
Finally get it rooted,
happen to have another os window 8 which i haven't used it for months, after boot up it take quite a long time to search for driver (not sure how long cause was away for an hour) , i never install the driver from this website link. after that i just run the software and it works, and follow all the steps given except i need to swop to my sdcard2 for the zip file as the sdcard is the internal memory of the phone

Is there any way to roll back to original recovery and unroot

How to Flash Zeki TB782B, TB1082B Rom with Livesuit (UnBrick)

Zeki TB782B/TB1082B is using the Allwinner Chip A10.
I search in the web and found the Rom flash steps
Flash Tool LivesuitPack
http://hotfile.com/dl/136803097/cffe5ab/LiveSuitPack_v1.07_usb_drivers.rar.html
The flash ROM Demo video
http://www.youtube.com/watch?v=238RR-WvhrQ
You can get the Rom at below link
http://depositfiles.com/files/u7ew46yzm
FID HN TB1082B ROM
http://depositfiles.com/files/ay9hhvpyf
FID CF TB782B ROM
http://depositfiles.com/files/0wopipacg
FID BN TB1082B ROM
http://depositfiles.com/files/4uoxkwjc4
FIB BN TB782B ROM
1.Required files: Upgrade tool (Livesuit.exe)
2. Make sure your tablet is fully charged
3. Backup your data, device will be formatted during upgrade
4. The driver and upgrade software work for both Windows XP and Windows 7.
Upgrade Steps:
1. Unzip the upgrade tool and USB drive to your hard drive (recommend to put it in C:\ ).
Double-click the LiveSuitPack_v1.07.exe file, it will automatically install the driver files. Click “OK” to complete the driver installation.
2. Open Livesuit.exe
Double-click to open the upgrade tool LiveSuit.exe
3. Select the firmware
Click “No” to not choose the user upgrade wizard, and click the “Select Firmware” button (the first button from the left) to select the firmware .img file.
4. Turn off your tablet
Make sure the tablet is powered off (Turn it on, press the power button for more than 8 seconds to force power off)
5. Press the key combination to start it in the upgrade mode
a. Press and hold down the “Vol +”, button on TB782B,TB892B or “Home” button on TB1082B
b. Connect the USB cable to tablet and computer
c. After connecting the USB cable, press the power button 6 times quickly (you should get a popup window if done correctly, if not repeat step 5 from beginning)
d. DON’T release the “Vol+” button till the LiveSuit window pops up
e. You can now release the “Vol+” button
(Note: If you install the driver at this time the pop-up dialog box, the path to point to installation directory UsbDriver Livesuit folder, click Next to complete the driver installation prompts).
You should see Livesuit window pops up; otherwise, you didn’t do it correctly, you have to repeat step 4 and 5.
6. Select the format to force upgrade
Livesuit prompt “force format”, click “Yes” (Y). All of the original apps installed will be removed.
We highly recommend mandatory format! ! ! Otherwise the update is not complete and may brick! ! !
7. Upgrade begins
Pop-up “OK to force format” dialog box, select “Yes”, the upgrade begins:
8. The upgrade is complete
Firmware download process lasted about three and a half minutes or so, please wait until the prompt “upgrade successful.”
9. Automatic restart
After the upgrade is complete, your tablet will automatically restart, then you can unplug the USB cable.
Slow start-up time machine for the first time, please be patient.
If the machine does not restart automatically, press and hold the Power button for 8-10 seconds or more to ensure the power switch off, then press the Power button 3 seconds or more to turn on your tablet.
10. Congratulations! You have flashed the firmware.
you can get the Google Play at below link
http://forum.xda-developers.com/showthread.php?t=1621831

Do you have one for FID BN?
Sent from my GT-S5830 using xda app-developers app

Fid bn tb782b?
Need the ROM for FID BN TB782B, Can someone help so I can unbrick my Zeki 7? Thanks!

Thanks alot
I was searching for these ROM from along time. You saved my tablet.

in need of some help
Hello!
I bought 3 zeki tablets for my kids for xmas. I was able to follow another thread to put google play on them, and 2 of the 3 work great.
One of the tablets keeps freezing though. I did a factory reset, but in doing so, google play update stayed. So I found this thread and tried to follow the directions above.
Now I can't even get the tablet to turn on. :/
I am assuming it is something I did, and I am hoping that someone can help.
Thank you in advance!!

What's the FID shown on the back case.
Sent from my GT-N7000 using xda premium

Does this firmware add any new features? Also does the android version change?
Sent from my GT-S5830 using xda premium

Reflash the rom
Sent from my GT-N7000 using xda premium

All the rom is Andriod 4.04
Sent from my GT-N7000 using xda premium

Please help
cablepama said:
Zeki TB782B/TB1082B is using the Allwinner Chip A10.
I search in the web and found the Rom flash steps
Flash Tool LivesuitPack
http://hotfile.com/dl/136803097/cffe5ab/LiveSuitPack_v1.07_usb_drivers.rar.html
The flash ROM Demo video
http://www.youtube.com/watch?v=238RR-WvhrQ
You can get the Rom at below link
http://depositfiles.com/files/u7ew46yzm
FID HN TB1082B ROM
http://depositfiles.com/files/ay9hhvpyf
FID CF TB782B ROM
http://depositfiles.com/files/0wopipacg
FID BN TB1082B ROM
http://depositfiles.com/files/4uoxkwjc4
FIB BN TB782B ROM
1.Required files: Upgrade tool (Livesuit.exe)
2. Make sure your tablet is fully charged
3. Backup your data, device will be formatted during upgrade
4. The driver and upgrade software work for both Windows XP and Windows 7.
Upgrade Steps:
1. Unzip the upgrade tool and USB drive to your hard drive (recommend to put it in C:\ ).
Double-click the LiveSuitPack_v1.07.exe file, it will automatically install the driver files. Click “OK” to complete the driver installation.
2. Open Livesuit.exe
Double-click to open the upgrade tool LiveSuit.exe
3. Select the firmware
Click “No” to not choose the user upgrade wizard, and click the “Select Firmware” button (the first button from the left) to select the firmware .img file.
4. Turn off your tablet
Make sure the tablet is powered off (Turn it on, press the power button for more than 8 seconds to force power off)
5. Press the key combination to start it in the upgrade mode
a. Press and hold down the “Vol +”, button on TB782B,TB892B or “Home” button on TB1082B
b. Connect the USB cable to tablet and computer
c. After connecting the USB cable, press the power button 6 times quickly (you should get a popup window if done correctly, if not repeat step 5 from beginning)
d. DON’T release the “Vol+” button till the LiveSuit window pops up
e. You can now release the “Vol+” button
(Note: If you install the driver at this time the pop-up dialog box, the path to point to installation directory UsbDriver Livesuit folder, click Next to complete the driver installation prompts).
You should see Livesuit window pops up; otherwise, you didn’t do it correctly, you have to repeat step 4 and 5.
6. Select the format to force upgrade
Livesuit prompt “force format”, click “Yes” (Y). All of the original apps installed will be removed.
We highly recommend mandatory format! ! ! Otherwise the update is not complete and may brick! ! !
7. Upgrade begins
Pop-up “OK to force format” dialog box, select “Yes”, the upgrade begins:
8. The upgrade is complete
Firmware download process lasted about three and a half minutes or so, please wait until the prompt “upgrade successful.”
9. Automatic restart
After the upgrade is complete, your tablet will automatically restart, then you can unplug the USB cable.
Slow start-up time machine for the first time, please be patient.
If the machine does not restart automatically, press and hold the Power button for 8-10 seconds or more to ensure the power switch off, then press the Power button 3 seconds or more to turn on your tablet.
10. Congratulations! You have flashed the firmware.
you can get the Google Play at below link
http://forum.xda-developers.com/showthread.php?t=1621831
Click to expand...
Click to collapse
i cant install the driver
am formated the pc and also tried in another pc
please help me

Pratheesh T K said:
i cant install the driver
am formated the pc and also tried in another pc
please help me
Click to expand...
Click to collapse
I am in desperate need of a rom dump or even just the ft5x_ts.ko from a non 4.04 upgraded version of the Zeki TB 782B. If anyone reads this anymore and has one that has no been updated please send me a reply, I have found a way to repair ALL currupted FT5x touch panels but need an unmodified module to verify the process will work on other models as well.
Thanks.

i have the Zeki Quad Core 4.4.2 Android Tablet and i rooted it but now im looking for a custom recovery that supports my device can anyone help?

Link dead
This link is no longer work
Flash Tool LivesuitPack
http://hotfile.com/dl/136803097/cffe...ivers.rar.html
Dose anyone have new link that works or where I can find the tool

Not Working Getting Stuck @ 51%
cablepama said:
Zeki TB782B/TB1082B is using the Allwinner Chip A10.
I search in the web and found the Rom flash steps
Flash Tool LivesuitPack
http://hotfile.com/dl/136803097/cffe5ab/LiveSuitPack_v1.07_usb_drivers.rar.html
The flash ROM Demo video
http://www.youtube.com/watch?v=238RR-WvhrQ
You can get the Rom at below link
http://depositfiles.com/files/u7ew46yzm
FID HN TB1082B ROM
http://depositfiles.com/files/ay9hhvpyf
FID CF TB782B ROM
http://depositfiles.com/files/0wopipacg
FID BN TB1082B ROM
http://depositfiles.com/files/4uoxkwjc4
FIB BN TB782B ROM
1.Required files: Upgrade tool (Livesuit.exe)
2. Make sure your tablet is fully charged
3. Backup your data, device will be formatted during upgrade
4. The driver and upgrade software work for both Windows XP and Windows 7.
Upgrade Steps:
1. Unzip the upgrade tool and USB drive to your hard drive (recommend to put it in C:\ ).
Double-click the LiveSuitPack_v1.07.exe file, it will automatically install the driver files. Click “OK” to complete the driver installation.
2. Open Livesuit.exe
Double-click to open the upgrade tool LiveSuit.exe
3. Select the firmware
Click “No” to not choose the user upgrade wizard, and click the “Select Firmware” button (the first button from the left) to select the firmware .img file.
4. Turn off your tablet
Make sure the tablet is powered off (Turn it on, press the power button for more than 8 seconds to force power off)
5. Press the key combination to start it in the upgrade mode
a. Press and hold down the “Vol +”, button on TB782B,TB892B or “Home” button on TB1082B
b. Connect the USB cable to tablet and computer
c. After connecting the USB cable, press the power button 6 times quickly (you should get a popup window if done correctly, if not repeat step 5 from beginning)
d. DON’T release the “Vol+” button till the LiveSuit window pops up
e. You can now release the “Vol+” button
(Note: If you install the driver at this time the pop-up dialog box, the path to point to installation directory UsbDriver Livesuit folder, click Next to complete the driver installation prompts).
You should see Livesuit window pops up; otherwise, you didn’t do it correctly, you have to repeat step 4 and 5.
6. Select the format to force upgrade
Livesuit prompt “force format”, click “Yes” (Y). All of the original apps installed will be removed.
We highly recommend mandatory format! ! ! Otherwise the update is not complete and may brick! ! !
7. Upgrade begins
Pop-up “OK to force format” dialog box, select “Yes”, the upgrade begins:
8. The upgrade is complete
Firmware download process lasted about three and a half minutes or so, please wait until the prompt “upgrade successful.”
9. Automatic restart
After the upgrade is complete, your tablet will automatically restart, then you can unplug the USB cable.
Slow start-up time machine for the first time, please be patient.
If the machine does not restart automatically, press and hold the Power button for 8-10 seconds or more to ensure the power switch off, then press the Power button 3 seconds or more to turn on your tablet.
10. Congratulations! You have flashed the firmware.
you can get the Google Play at below link
http://forum.xda-developers.com/showthread.php?t=1621831
Click to expand...
Click to collapse
I have run the Livesuite and it appears to not work and I have been stuck for quite sometime. I need some help with getting a proper working image I was going to try to use:
FID BN TB1082B ROM
http://depositfiles.com/files/4uoxkwjc4
but the link is no longer active and would I haven't been able to use my tablet the other link is where it get stuck at 51% when trying to transfer the image
http://depositfiles.com/files/ay9hhvpyf
FID CF TB782B ROM
from this one and always gets stuck in the loading process of 51%
any other help with a link to the original image would be greatly appreciated. Thank you in advance!

[How to/MTK65xx] ROOT, Backup & Flash (MTKDroidTools, Spflashtool, CWM) [MTK Only]

[How to/MTK65xx] ROOT, Backup & Flash (MTKDroidTools, Spflashtool, CWM) [MTK Only]
Hi
This is a guide to ROOT, backup and flash your MTK65xx or Other device (Supported devices: http://forum.xda-developers.com/apps/framaroot/framaroot-supported-devices-t2722980 all credits to alephzain) written by s7yler.
More guides & reviews on my Youtubechannel http://www.Youtube.com/s7yler and http://s7yler.blogspot.com
(Tools used are Framaroot, MTKDroidtools/CWM and SpflashTool)
I will try to write this guide in step by step, so everyone can understand it. This is for PC and will work with Windows 7.
-> All is done by your own risk! this is just a guide to help people with the tools and process. <-
How to ROOT the phone first
1. Get the latest Framaroot apk here http://forum.xda-developers.com/apps/framaroot/root-framaroot-one-click-apk-to-root-t2130276
2. Download it and install it on the phone, open the Framaroot app on the phone.
3. Let it be on Install SuperSU, and try the last method, if that dont work, then try one of the 2 others.
4. Then it should say success root, and now reboot the phone.
5. After reboot the phone should be ROOTED, download root checker from the Play store and verify that your rooted.
How to make a simple backup (not completly 1:1) of your stock ROM / MTK phone
1. You have you brand new MTK phone.
2. What I do first is to install all possible drivers. So you go to your PC and install these apps/drivers:
Snappea - http://www.snappea.com/windows
Pdanet drivers - http://pdanet.co/a/ (When it ask what device you have in the install process, just say "Other")
Mediatek Preloader USB VCOM Drivers - (Install file) http://www.mediafire.com/download/cypm22rgs2k83ji/MT6577+USB+VCOM+drivers.rar and here the raw drivers http://www.magicdriver.com/driver4214-ver_1.1123.0.html
For the Preloader VCOM drivers for Windows 8 please read here, and follow this:
http://thebroodle.com/android/install-mediatek-mt65xx-usb-vcom-drivers-windows-8-8-1/
3. On your MTK phone you must in "Developer Options" enable "USB debugging mode".
4. Now download MTK Droid Tools here http://forum.xda-developers.com/showpost.php?p=49597819&postcount=922
5. Start MTK Droid Tools, and connect your phone with the USB cable to the PC. (if Windows install some drivers, then let it install them automatically).
6. Now on the first page of MTK Droid Tools, it should display all infos about the phone when you connect it.
7. If the sqare is Green, then you have root shell and ready, if its not green, press the ROOT button to the right in MTK Droid tools.
8. Click the "IMEI/NVRAM" button and then Backup to backup your IMEI/NVRAM, the backup files will be inside of the MTK Droid Tools folder.
Also you can manually write down your IMEI number just in case it should be lost.
9. Now go to the tap "root, backup, recovery" (in MTK Droid Tools).
10. Click the Backup button, and it will create a complete backup of your ROM. (in the end it will ask, if you want to pack it, just answer no)
11. When it is finished then also click "To prepare blocks for FlashTool", that will convert the backup to be compatible with Spflashtool. (choose the files.md5 inside the backup folder)
12. After the backup is done it will be inside "backup" in the MTK Droid Tools folder. And inside it there will also be a new folder called "!Files_to_FlashTool" Inside there the files for Spflashtool is. So when loading your backup with Spflashtool you must load the scatter file from inside there.
13. Now to install CWM (clockworkmod recovery) In MTK Droidtools, choose "To use boot from phone" and click the "Recovery and Boot" button. It will ask you a lot, just say yes every time, and it will end of sending CWM recovery to the phone and reboot into it on the phone. After you see CWM on the phone you know it is done. You can switch the menu with the volume keys, and the power is the select button.
14. Inside CWM you can also do a complete backup of your phone (remember to have enough space, you can do the backup to the internal storage OR to the SDcard - try "backup" if that fails then choose instead "backup to external sd" or vice versa). I recommed doing that because CWM makes another backup than the one made with MTK Droid Tools. So if you should get problems or loose something, you can always run your CWM backup into your phone and it will be as before.
15. After your done the backup, copy the backup also to a safe place on your PC. Just in case!
16. So now your Rooted, have installed CWM recovery, have a IMEI/NVRAM backup and a backup for Spflash Tools plus CWM backup.
To make a 100% FULL 1:1 (more advanced) ReadBack ROM backup using SP FlashTool please check these guides here, and learn how to:
http://mmx-unite2.blogspot.de/2014/08/how-to-create-readback-backup.html
http://forum.gsmhosting.com/vbb/f60...artphone-how-read-backup-1656510/#post9415324
or here:
http://pinoyscreencast.net/how-to/g...-smartphones-using-spft-mtk-droid-root-tools/
To flash a backup or ROM with Spflashtool:
Disclaimer: Don't flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones you will have a brick even if you download these blocks read from phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM. I take no responsibility for any harm done while attempting this!
1. Go download Spflash tool here http://forum.xda-developers.com/showthread.php?t=1982576
Both version 3 or 5 should be good to use. If your having problems with one of them or they crash, try this newer version here: http://forum.xda-developers.com/showthread.php?t=2650125
2. Disconnect your phone if connected with USB to the PC, and turn OFF the phone completely, also take out the battery if possible (but can also work with the battery inside the phone, for phones with builtin battery).
2. When you now again connect the USB cable to the phone with the PC while the phone is still off, Windows should popup and beginn to install the MTK65XX Preloader Drivers, this only happens if you installed the Mediatek Preloader USB VCOM Drivers correct in Windows. After they successfully installed, disconnect the USB cable again.
2. Start Flash_tool.exe to start the program
3. Now hit the "Scatter-loading" button, and go to the backup or ROM, inside the folder "!Flash files Spflashtool" load the scatter.txt file. (ALWAYS only load a ROM that is 100% made for your phone, flashing a wrong ROM may make your phone non-bootable)
4. When the scatter file is loaded, it will show all the content in the Spflashtool window.
5. If you only need for example to flash the EBR files, you can deselect all the others. But remember that it must be same ROM or backup.
6. Hit the "Download" button in Spflashtool. Then there should be some pink lines with colors showing that it loads the files.
7. When it stopps to flash/load, connect your phone with the USB cable, remember the phone must be OFF (and without the battery inside if possible to remove). If nothing happens then maybe it is necessary to press at the same time with connect of a cable the camera or volume buttons. For example, hold the volume up button down, insert the USB cable, and then insert the battery (still holding the volume up button down) when you hear it connect in Windows and the colored lines begins to move, let go off the volume up button.
8. Now it should connect (maybe Windows install some drivers by now - the MTK65xx Preloader drivers) and it will in the end continue to flash in Spflashtool when the phone is found and connected. (If you get PMT has changed error, you need to change in SP Flash Tool from "Download Only" to "Firmware Upgrade" but you will need a backup that contains ALL files then including the cache and usrdata files, or it will not allow to flash. Also the phone will be formatted first with Firmware Upgrade, and then flashed.)
9. Now wait while it flashes all files, when it is done, a window will popup white a Green circle. Now you can disconnect the cable, close Splflashtool and reboot the phone. The phone should now boot up with the new ROM.
10. A good thing can be to do a full factory reset after your booted or do it in CWM, to clear all caches. But not necessary.
To enter Recovery or Download mode - turn phone completly off then
Download mode = vol up + pwr (hold both down for several seconds)
Recovery = vol down + pwr (hold both down for several seconds)
ROMs can be found on
http://needrom.com
http://pan.baidu.com/share/home?uk=2637246389#category/type=0
How to 1-CLICK-ROOT Mediatek 4.2 or 4.4 KitKat Smartphones and change iRoot to normal SuperSU
How to BACKUP / READBACK Mediatek MTK Smartphones with MTK Droid Tools / SP Flash Tool
Here a video how you use SP Flash Tool and flash a ROM (whole process, using Windows 7)
How to repair/change IMEI's with MAUI META on Mediatek Smartphones

s7yler said:
Hi
This is a guide to ROOT, backup and flash your MTK65xx device written by s7yler.
More guides & reviews on my Youtubechannel http://www.Youtube.com/s7yler
(Tools used are Framaroot, MTKDroidtools/CWM and SpflashTool)
I will try to write this guide in step by step, so everyone can understand it. This is for PC and will work with Windows 7.
-> All is done by your own risk! this is just a guide to help people with the tools and process. <-
How to ROOT the phone first
1. Get the latest Framaroot apk here http://forum.xda-developers.com/apps/framaroot/root-framaroot-one-click-apk-to-root-t2130276
2. Download it and install it on the phone, open the Framaroot app on the phone.
3. Let it be on Install SuperSU, and try the last method, if that dont work, then try one of the 2 others.
4. Then it should say success root, and now reboot the phone.
5. After reboot the phone should be ROOTED, download root checker from the Play store and verify that your rooted.
How to make a backup of your stock ROM / MTK phone
1. You have you brand new MTK phone.
2. What I do first is to install all possible drivers. So you go to your PC and install these apps/drivers:
Snappea - http://www.snappea.com/windows
Pdanet drivers - http://pdanet.co/a/ (When it ask what device you have in the install process, just say "Other")
Mediatek Preloader USB VCOM Drivers - http://www.magicdriver.com/driver4214-ver_1.1123.0.html
3. On your MTK phone you must in "Developer Options" enable "USB debugging mode".
4. Now download MTK Droid Tools here http://forum.xda-developers.com/showpost.php?p=49597819&postcount=922
5. Start MTK Droid Tools, and connect your phone with the USB cable to the PC. (if Windows install some drivers, then let it install them automatically).
6. Now on the first page of MTK Droid Tools, it should display all infos about the phone when you connect it.
7. If the sqare is Green, then you have root shell and ready, if its not green, press the ROOT button to the right in MTK Droid tools.
8. Click the "IMEI/NVRAM" button and then Backup to backup your IMEI/NVRAM, the backup files will be inside of the MTK Droid Tools folder.
Also you can manually write down your IMEI number just in case it should be lost.
9. Now go to the tap "root, backup, recovery" (in MTK Droid Tools).
10. Click the Backup button, and it will create a complete backup of your ROM.
11. When it is finished then also click "To prepare blocks for FlashTool", that will convert the backup to be compatible with Spflashtool.
12. After the backup is done it will be inside "backup" in the MTK Droid Tools folder. And inside it there will also be a new folder called "!Flash files Spflashtool" Inside there the files for Spflashtool is. So when loading your backup with Spflashtool you must load the scatter file from inside there.
13. Now to install CWM (clockworkmod recovery) In MTK Droidtools, choose "To use boot from phone" and click the "Recovery and Boot" button. It will ask you a lot, just say yes every time, and it will end of sending CWM recovery to the phone and reboot into it on the phone. After you see CWM on the phone you know it is done. You can switch the menu with the volume keys, and the power is the select button.
14. Inside CWM you can also do a complete backup of your phone (remember to have enough space, you can do the backup to the internal storage OR to the SDcard). I recommed doing that because CWM makes another backup than the one made with MTK Droid Tools. That is more complete. So if you should get problems or loose something, you can always run your CWM backup into your phone and it will be as before.
15. After your done the backup, copy the backup also to a safe place on your PC. Just in case!
16. So now your Rooted, have installed CWM recovery, have a IMEI/NVRAM backup and a backup for Spflash Tools plus CWM backup.
To flash a backup or ROM with Spflashtool:
1. Go download Spflash tool here http://forum.xda-developers.com/showthread.php?t=1982576
Both version 3 or 5 should be good to use. If your having problems with one of them, try another version.
2. Disconnect your phone if connected with USB to the PC, and turn OFF the phone completely, also take out the battery if possible (but can also work with the battery inside the phone, for phones with builtin battery).
2. Start Flash_tool.exe to start the program
3. Now hit the "Scatter-loading" button, and go to the backup or ROM, inside the folder "!Flash files Spflashtool" load the scatter.txt file. (ALWAYS only load a ROM that is 100% made for your phone, flashing a wrong ROM may make your phone non-bootable)
4. When the scatter file is loaded, it will show all the content in the Spflashtool window.
5. If you only need for example to flash the EBR files, you can deselect all the others. But remember that it must be same ROM or backup.
6. Hit the "Download" button in Spflashtool. Then there should be some lines with colors showing that it loads the files.
7. When it stopps to flash/load, connect your phone with the USB cable, remember the phone must be OFF.
8. Now it should connect (maybe Windows install some drivers by now - the MTK65xx Preloader drivers) and it will in the end continue to flash in Spflashtool when the phone is found and connected.
9. Now wait while it flashes all files, when it is done, a window will popup white a Green circle. Now you can disconnect the cable, close Splflashtool and reboot the phone. The phone should now boot up with the new ROM.
10. A good thing can be to do a full factory reset after your booted or do it in CWM, to clear all caches. But not necessary.
Click to expand...
Click to collapse
hey great guide man, but please have a mod change the title, it makes it sound like any phone could be rooted this way only to open it and be disapointed that its for MTK65xx only. i would do something like this
[How to][MTK65XX] ROOT, Backup & Flash (MTKDroidTools, Spflashtool, CWM)

Trozzul said:
hey great guide man, but please have a mod change the title, it makes it sound like any phone could be rooted this way only to open it and be disapointed that its for MTK65xx only. i would do something like this
[How to][MTK65XX] ROOT, Backup & Flash (MTKDroidTools, Spflashtool, CWM)
Click to expand...
Click to collapse
thank you to my friends so Root I do not know how to just flash the file with flash ebr tools, I do not know the use that is why I ask for help on using just to flash the two files ; thank you again.
I do not know how to use the software to just flash the two files.
and im a french user

Trozzul said:
hey great guide man, but please have a mod change the title, it makes it sound like any phone could be rooted this way only to open it and be disapointed that its for MTK65xx only. i would do something like this
[How to][MTK65XX] ROOT, Backup & Flash (MTKDroidTools, Spflashtool, CWM)
Click to expand...
Click to collapse
Hey sorry, I changed my text now. The ROOT part is not only for MTK phones, also other devices. Here is alephzains list of supported devices: http://forum.xda-developers.com/apps/framaroot/framaroot-supported-devices-t2722980
You also may try it on others, the worst there can happen is that it just says root failed, and not rooting the device. But then you at least have tried.

Rocfiles said:
thank you to my friends so Root I do not know how to just flash the file with flash ebr tools, I do not know the use that is why I ask for help on using just to flash the two files ; thank you again.
I do not know how to use the software to just flash the two files.
and im a french user
Click to expand...
Click to collapse
In Spflash tool load the scatter file from the backup or ROM directory where you also have all files including the modded EBR files, when loaded it will show all the content to flash, every line has a checkmark in front, uncheck everything but the EBR1 and EBR2. And then flash as I write in the guide. That way it will only flash the EBR1 and 2 to the phone.

Hope i can get this right
Hey whats up bro. Thanks for your efforts on helping with this forum. I have the hdc one max and it do not have a removable battery. Im trying to use sp flash tool to retore to stock with rom but i have no way of getting spft to recognize the device to start. Any solution?

MajorsCloset said:
Hey whats up bro. Thanks for your efforts on helping with this forum. I have the hdc one max and it do not have a removable battery. Im trying to use sp flash tool to retore to stock with rom but i have no way of getting spft to recognize the device to start. Any solution?
Click to expand...
Click to collapse
So you did install all the drivers I write about in my guide, and rebooted? Normally Spflash tool should recognize the phone after that. (and set the USB debugging mode to on?)

Thank you! Thank you! Thank you!
s7yler said:
So you did install all the drivers I write about in my guide, and rebooted? Normally Spflash tool should recognize the phone after that. (and set the USB debugging mode to on?)
Click to expand...
Click to collapse
thanks for everything bro. i manage to finally get the vcom driver installed. with a lil help from usbreview. i flashed the rom i downloaded from needrom like you suggested and bam im back in business. thanks alot. i managed to control the flickering/random button pressing by turning brightness up as a temporary fix. i will try a fix i just found, a little later.

MajorsCloset said:
thanks for everything bro. i manage to finally get the vcom driver installed. with a lil help from usbreview. i flashed the rom i downloaded from needrom like you suggested and bam im back in business. thanks alot. i managed to control the flickering/random button pressing by turning brightness up as a temporary fix. i will try a fix i just found, a little later.
Click to expand...
Click to collapse
I am glad that it worked for you. Does the Youtube app work? can you login on Youtube? with the needrom ROM? or how does the Gapps react on this ROM now?

s7yler said:
I am glad that it worked for you. Does the Youtube app work? can you login on Youtube? with the needrom ROM? or how does the Gapps react on this ROM now?
Click to expand...
Click to collapse
it may be just a update for bugs. the only difference i notice was a x to kill all apps but it still dont work. oh and more notification shortcuts. still cant login in into yourtube and i really need my google apps. i used your guide but i got the drivers from 4shared. i appreciate all your help for real. only if this device wasnt defected from jump with this flicker i would deal with it. i might sell it. smh. i really like this device.lol.

Hi!
For the last few days I was trying to find the right ROM for me. So I had to learn about MTK Tools and SP Flash tool and I even succeeded with loading different ROMs. What I did not succeed is to restore the original backup made with MTK tools. I followed the tutorial from the first post, the flashing operation ended OK but my smartphone (THL w200s) just wouldn't start. As a matter of fact it starts the beginning but after it passes the animated log it stops. I did not flash the CWM recovery on my device before creating the backup as I wanted to save a snapshot of the original ROM as it was from the factory. More than this, I installed a fresh ROM (I guess it was exactly the same with the default one), everything was OK, I rooted and made my settings (configure emails, etc.) and I made a backup with MTK tools. I had the same issue: I restored the backup with SP Flash Tools, flashing was OK but after that the phone would not start.
What am I doing wrong?

s7yler said:
Hi
This is a guide to ROOT, backup and flash your MTK65xx or Other device (Supported devices: http://forum.xda-developers.com/apps/framaroot/framaroot-supported-devices-t2722980 all credits to alephzain) written by s7yler.
More guides & reviews on my Youtubechannel http://www.Youtube.com/s7yler
(Tools used are Framaroot, MTKDroidtools/CWM and SpflashTool)
I will try to write this guide in step by step, so everyone can understand it. This is for PC and will work with Windows 7.
-> All is done by your own risk! this is just a guide to help people with the tools and process. <-
How to ROOT the phone first
1. Get the latest Framaroot apk here http://forum.xda-developers.com/apps/framaroot/root-framaroot-one-click-apk-to-root-t2130276
2. Download it and install it on the phone, open the Framaroot app on the phone.
3. Let it be on Install SuperSU, and try the last method, if that dont work, then try one of the 2 others.
4. Then it should say success root, and now reboot the phone.
5. After reboot the phone should be ROOTED, download root checker from the Play store and verify that your rooted.
How to make a simple backup of your stock ROM / MTK phone
1. You have you brand new MTK phone.
2. What I do first is to install all possible drivers. So you go to your PC and install these apps/drivers:
Snappea - http://www.snappea.com/windows
Pdanet drivers - http://pdanet.co/a/ (When it ask what device you have in the install process, just say "Other")
Mediatek Preloader USB VCOM Drivers - (Install file) http://www.mediafire.com/download/cypm22rgs2k83ji/MT6577+USB+VCOM+drivers.rar and here the raw drivers http://www.magicdriver.com/driver4214-ver_1.1123.0.html
3. On your MTK phone you must in "Developer Options" enable "USB debugging mode".
4. Now download MTK Droid Tools here http://forum.xda-developers.com/showpost.php?p=49597819&postcount=922
5. Start MTK Droid Tools, and connect your phone with the USB cable to the PC. (if Windows install some drivers, then let it install them automatically).
6. Now on the first page of MTK Droid Tools, it should display all infos about the phone when you connect it.
7. If the sqare is Green, then you have root shell and ready, if its not green, press the ROOT button to the right in MTK Droid tools.
8. Click the "IMEI/NVRAM" button and then Backup to backup your IMEI/NVRAM, the backup files will be inside of the MTK Droid Tools folder.
Also you can manually write down your IMEI number just in case it should be lost.
9. Now go to the tap "root, backup, recovery" (in MTK Droid Tools).
10. Click the Backup button, and it will create a complete backup of your ROM. (in the end it will ask, if you want to pack it, just answer no)
11. When it is finished then also click "To prepare blocks for FlashTool", that will convert the backup to be compatible with Spflashtool. (choose the files.md5 inside the backup folder)
12. After the backup is done it will be inside "backup" in the MTK Droid Tools folder. And inside it there will also be a new folder called "!Files_to_FlashTool" Inside there the files for Spflashtool is. So when loading your backup with Spflashtool you must load the scatter file from inside there.
13. Now to install CWM (clockworkmod recovery) In MTK Droidtools, choose "To use boot from phone" and click the "Recovery and Boot" button. It will ask you a lot, just say yes every time, and it will end of sending CWM recovery to the phone and reboot into it on the phone. After you see CWM on the phone you know it is done. You can switch the menu with the volume keys, and the power is the select button.
14. Inside CWM you can also do a complete backup of your phone (remember to have enough space, you can do the backup to the internal storage OR to the SDcard - try "backup" if that fails then choose instead "backup to external sd" or vice versa). I recommed doing that because CWM makes another backup than the one made with MTK Droid Tools. So if you should get problems or loose something, you can always run your CWM backup into your phone and it will be as before.
15. After your done the backup, copy the backup also to a safe place on your PC. Just in case!
16. So now your Rooted, have installed CWM recovery, have a IMEI/NVRAM backup and a backup for Spflash Tools plus CWM backup.
To make a more advanced & complete 1:1 ReadBack ROM backup using SP FlashTool please check this guide here:
http://forum.gsmhosting.com/vbb/f60...artphone-how-read-backup-1656510/#post9415324
or here:
http://pinoyscreencast.net/how-to/g...-smartphones-using-spft-mtk-droid-root-tools/
To flash a backup or ROM with Spflashtool:
Never needlessly Download preloader and DSP_BL blocks! It is always dangerous! On some models of phones you will have a brick even if you download these blocks read from phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.
1. Go download Spflash tool here http://forum.xda-developers.com/showthread.php?t=1982576
Both version 3 or 5 should be good to use. If your having problems with one of them, try another version.
2. Disconnect your phone if connected with USB to the PC, and turn OFF the phone completely, also take out the battery if possible (but can also work with the battery inside the phone, for phones with builtin battery).
2. When you now again connect the USB cable to the phone with the PC while the phone is still off, Windows should popup and beginn to install the MTK65XX Preloader Drivers, this only happens if you installed the Mediatek Preloader USB VCOM Drivers correct in Windows. After they successfully installed, disconnect the USB cable again.
2. Start Flash_tool.exe to start the program
3. Now hit the "Scatter-loading" button, and go to the backup or ROM, inside the folder "!Flash files Spflashtool" load the scatter.txt file. (ALWAYS only load a ROM that is 100% made for your phone, flashing a wrong ROM may make your phone non-bootable)
4. When the scatter file is loaded, it will show all the content in the Spflashtool window.
5. If you only need for example to flash the EBR files, you can deselect all the others. But remember that it must be same ROM or backup.
6. Hit the "Download" button in Spflashtool. Then there should be some pink lines with colors showing that it loads the files.
7. When it stopps to flash/load, connect your phone with the USB cable, remember the phone must be OFF (and without the battery inside if possible to remove). If nothing happens then maybe it is necessary to press at the same time with connect of a cable the camera or volume buttons. For example, hold the volume up button down, insert the USB cable, and then insert the battery (still holding the volume up button down) when you hear it connect in Windows and the colored lines begins to move, let go off the volume up button.
8. Now it should connect (maybe Windows install some drivers by now - the MTK65xx Preloader drivers) and it will in the end continue to flash in Spflashtool when the phone is found and connected.
9. Now wait while it flashes all files, when it is done, a window will popup white a Green circle. Now you can disconnect the cable, close Splflashtool and reboot the phone. The phone should now boot up with the new ROM.
10. A good thing can be to do a full factory reset after your booted or do it in CWM, to clear all caches. But not necessary.
To enter Recovery or Download mode - turn phone completly off then
Download mode = vol up + pwr (hold both down for several seconds)
Recovery = vol down + pwr (hold both down for several seconds)
ROMs can be found on
http://needrom.com
http://pan.baidu.com/share/home?uk=2637246389#category/type=0
Click to expand...
Click to collapse
thax a lot bro,.,.i tried so many ways to port CW<M to my spice Mi-436,.,bt never succeded
bt after reading your toturial i did it man!!!!
A TONSSSSS of thanks !!!!!

Shaunak Falconzz Pandey said:
thax a lot bro,.,.i tried so many ways to port CW<M to my spice Mi-436,.,bt never succeded
bt after reading your toturial i did it man!!!!
A TONSSSSS of thanks !!!!!
Click to expand...
Click to collapse
I am happy to hear that it worked for you thanks for your comment.

I'm friends with Ruth framaroot phone and then off ... then mtk droid software with admin access and I'll be left bottom blue square root, and after OK, now I'm off to re-using software I could not come up with the phone and check it again before going off the bright green and blue non Ruth ... WHenever the phone or out ROM Mikham CWR Rykhn and are forced to ROM Disturb mobile phone you like'm going to be all Fast boot he has to change imei number do so because they must complete phone mtk software up to took root after changing the number (phone number, I jumped backups without ....) time for the tell greenfield No refused'd action I called the representative has not taken a pay ..... not so mythical after a few moments she wants a ...
I will be grateful if anyone knows how to fix the flaw lead ...
All are according to the latest software version XDA
my phone.....huawei g700-u10

MTK Droid error message
s7yler said:
Hi
This is a guide to ROOT, backup and flash your MTK65xx or Other device (Supported devices: http://forum.xda-developers.com/apps/framaroot/framaroot-supported-devices-t2722980 all credits to alephzain) written by s7yler.
More guides & reviews on my Youtubechannel http://www.Youtube.com/s7yler
(Tools used are Framaroot, MTKDroidtools/CWM and SpflashTool)
I will try to write this guide in step by step, so everyone can understand it. This is for PC and will work with Windows 7.
-> All is done by your own risk! this is just a guide to help people with the tools and process. <-
How to ROOT the phone first
1. Get the latest Framaroot apk here http://forum.xda-developers.com/apps/framaroot/root-framaroot-one-click-apk-to-root-t2130276
2. Download it and install it on the phone, open the Framaroot app on the phone.
3. Let it be on Install SuperSU, and try the last method, if that dont work, then try one of the 2 others.
4. Then it should say success root, and now reboot the phone.
5. After reboot the phone should be ROOTED, download root checker from the Play store and verify that your rooted.
How to make a simple backup (not completly 1:1) of your stock ROM / MTK phone
1. You have you brand new MTK phone.
2. What I do first is to install all possible drivers. So you go to your PC and install these apps/drivers:
Snappea - http://www.snappea.com/windows
Pdanet drivers - http://pdanet.co/a/ (When it ask what device you have in the install process, just say "Other")
Mediatek Preloader USB VCOM Drivers - (Install file) http://www.mediafire.com/download/cypm22rgs2k83ji/MT6577+USB+VCOM+drivers.rar and here the raw drivers http://www.magicdriver.com/driver4214-ver_1.1123.0.html
3. On your MTK phone you must in "Developer Options" enable "USB debugging mode".
4. Now download MTK Droid Tools here http://forum.xda-developers.com/showpost.php?p=49597819&postcount=922
5. Start MTK Droid Tools, and connect your phone with the USB cable to the PC. (if Windows install some drivers, then let it install them automatically).
6. Now on the first page of MTK Droid Tools, it should display all infos about the phone when you connect it.
7. If the sqare is Green, then you have root shell and ready, if its not green, press the ROOT button to the right in MTK Droid tools.
8. Click the "IMEI/NVRAM" button and then Backup to backup your IMEI/NVRAM, the backup files will be inside of the MTK Droid Tools folder.
Also you can manually write down your IMEI number just in case it should be lost.
9. Now go to the tap "root, backup, recovery" (in MTK Droid Tools).
10. Click the Backup button, and it will create a complete backup of your ROM. (in the end it will ask, if you want to pack it, just answer no)
11. When it is finished then also click "To prepare blocks for FlashTool", that will convert the backup to be compatible with Spflashtool. (choose the files.md5 inside the backup folder)
12. After the backup is done it will be inside "backup" in the MTK Droid Tools folder. And inside it there will also be a new folder called "!Files_to_FlashTool" Inside there the files for Spflashtool is. So when loading your backup with Spflashtool you must load the scatter file from inside there.
13. Now to install CWM (clockworkmod recovery) In MTK Droidtools, choose "To use boot from phone" and click the "Recovery and Boot" button. It will ask you a lot, just say yes every time, and it will end of sending CWM recovery to the phone and reboot into it on the phone. After you see CWM on the phone you know it is done. You can switch the menu with the volume keys, and the power is the select button.
14. Inside CWM you can also do a complete backup of your phone (remember to have enough space, you can do the backup to the internal storage OR to the SDcard - try "backup" if that fails then choose instead "backup to external sd" or vice versa). I recommed doing that because CWM makes another backup than the one made with MTK Droid Tools. So if you should get problems or loose something, you can always run your CWM backup into your phone and it will be as before.
15. After your done the backup, copy the backup also to a safe place on your PC. Just in case!
16. So now your Rooted, have installed CWM recovery, have a IMEI/NVRAM backup and a backup for Spflash Tools plus CWM backup.
To make a 100% FULL 1:1 (more advanced) ReadBack ROM backup using SP FlashTool please check these guides here, and learn how to:
http://forum.gsmhosting.com/vbb/f60...artphone-how-read-backup-1656510/#post9415324
or here:
http://pinoyscreencast.net/how-to/g...-smartphones-using-spft-mtk-droid-root-tools/
To flash a backup or ROM with Spflashtool:
Disclaimer: Don't flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones you will have a brick even if you download these blocks read from phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM. I take no responsibility for any harm done while attempting this!
1. Go download Spflash tool here http://forum.xda-developers.com/showthread.php?t=1982576
Both version 3 or 5 should be good to use. If your having problems with one of them or they crash, try this newer version here: http://forum.xda-developers.com/showthread.php?t=2650125
2. Disconnect your phone if connected with USB to the PC, and turn OFF the phone completely, also take out the battery if possible (but can also work with the battery inside the phone, for phones with builtin battery).
2. When you now again connect the USB cable to the phone with the PC while the phone is still off, Windows should popup and beginn to install the MTK65XX Preloader Drivers, this only happens if you installed the Mediatek Preloader USB VCOM Drivers correct in Windows. After they successfully installed, disconnect the USB cable again.
2. Start Flash_tool.exe to start the program
3. Now hit the "Scatter-loading" button, and go to the backup or ROM, inside the folder "!Flash files Spflashtool" load the scatter.txt file. (ALWAYS only load a ROM that is 100% made for your phone, flashing a wrong ROM may make your phone non-bootable)
4. When the scatter file is loaded, it will show all the content in the Spflashtool window.
5. If you only need for example to flash the EBR files, you can deselect all the others. But remember that it must be same ROM or backup.
6. Hit the "Download" button in Spflashtool. Then there should be some pink lines with colors showing that it loads the files.
7. When it stopps to flash/load, connect your phone with the USB cable, remember the phone must be OFF (and without the battery inside if possible to remove). If nothing happens then maybe it is necessary to press at the same time with connect of a cable the camera or volume buttons. For example, hold the volume up button down, insert the USB cable, and then insert the battery (still holding the volume up button down) when you hear it connect in Windows and the colored lines begins to move, let go off the volume up button.
8. Now it should connect (maybe Windows install some drivers by now - the MTK65xx Preloader drivers) and it will in the end continue to flash in Spflashtool when the phone is found and connected.
9. Now wait while it flashes all files, when it is done, a window will popup white a Green circle. Now you can disconnect the cable, close Splflashtool and reboot the phone. The phone should now boot up with the new ROM.
10. A good thing can be to do a full factory reset after your booted or do it in CWM, to clear all caches. But not necessary.
To enter Recovery or Download mode - turn phone completly off then
Download mode = vol up + pwr (hold both down for several seconds)
Recovery = vol down + pwr (hold both down for several seconds)
ROMs can be found on
http://needrom.com
http://pan.baidu.com/share/home?uk=2637246389#category/type=0
Click to expand...
Click to collapse
------------------------------------------------------------------------------------------------------------
I'm receiving an error message "SU inaccessible" after hitting the ROOT icon. The phone is a No.1 S7 MTK6589.
I previously tried using the Frameroot app but it failed as well.
Any ideas what the problem might be and how to solve?
Thanks,
Ruby

UPDATE
I have updated the Original Post with a video now, that show the whole process how to flash and use SP Flash Tool.
As always, everything is done at your own risk. It is just a guide. This video is for education only.

Very Useful Tips
Hy Man Thanks 4 This Useful Tips. Very Impressed.I Like Xda VeryMuch.

Fun accident
Well here's my story.
I was trying to debrand some Huawei Y330-U05 in order to resell them. My first clue was to root the devices and remove all the Entel PCS crap, but I was unable to remove the Boot Splashscreen. So I looked over the net and I could not find a compatible ROM for my model. I downloaded a Y330-U01 ROM from Europe and I tried to flash it figuring that later I'd have to fix the 3G bands. FlashTools did not let me do that and I had the stupid idea to boot the biit.img and recovery.img from the U01 into the U05 with MTKdroidTools. Bricked the phone, and the only way to bring it back was to use the U01 ROM and flash it back. I changed my device from U05 to U01, like I wanted at first but I cant change the 3G bands and I don't have 3G connnection now.
I can't flash back the U05 backup ROMs I did from the phone before I started messing with them because the of the model mismatch (Phone now thinks it is a U01 version). And since there is no stock ROM for the U05 model to download, except for an UPDATE.APP from Movistar Mexico that phone refuses to accept, I'm afraid that if I reverse the whloe process I will end up with a bricked phone and no Stock ROM to bring it back.
Here comes the question. How do I force install a WRONG ROM into my phone? Remember: my Y330-U05 now thinks it is a Y330-U01.
Thanks a lot!

Blu Studio 5.0 C HD
Can the blu studio 5.0c hd be rooted this way? A bit scared to do it because this is my daily driver

SU Inaccessible error
Ruby_97 said:
------------------------------------------------------------------------------------------------------------
I'm receiving an error message "SU inaccessible" after hitting the ROOT icon. The phone is a No.1 S7 MTK6589.
I previously tried using the Frameroot app but it failed as well.
Any ideas what the problem might be and how to solve?
Thanks,
Ruby
Click to expand...
Click to collapse
i saw your screenshot and yellow box at the bottom clearly indicates that your device has not been rooted properly. adb still exists as secure region. it is said that your device should said to be rooted properly only when your device got adb insecure. However, if your device has locked bootloader, doing so, i.e. entering or making adb insecure may lead your device to dead boot, a stage from which there are only two ways to survive from:- JTAG/RIFF box OR by replacing motherboard!!!!
However, if your bootloader is unlocked and only if your device is dev friendly, following link may help you to get green box at the bottom of MTK Droid Root Tools indicating your device has proper root access.
However, i have successfully solved this error in my panasonic p81 by making adb insecure.
Though, Do this on your own risk....Remember again, making adb insecure may make your device FAIL!!!!
Head over to following link:-
http://forum.xda-developers.com/showthread.php?t=1687590
Thanks to dev Chainfire again for this wonderful application....

[STOCK ROM][TOOL][ALCATEL] One touch tab 7 (T15)

Probably, if you are here then your alcatel touch is running with the Prestigio 7.0 multipad stock rom (PM3970), with no wireless and no accelerometer. Finally, I got my hands on the stock rom for the Alcatel one touch (T15). I would lay out the instructions that finally got this tab to work.
I stumbled upon it on an arabic forum called gsm-flash.com, tested it and thought of sharing it with you:
Download the AmLogic USB burning tool attached
Run the AmLogic app with administrative privileges
Power off your device
Connect the device using the USB cable
Press Power & Vol + until you see that your device is connected on Port 1 of the app
If all is good, goto step 10,if it didn’t then you need the drivers, proceed to step 8
Locate the Amlogic tool folder and then select the AmLogicUSBurningDrive folder
Select the win7 folder, locate the right installer and run it as admin
Go back to 3
In the Amlogic app, select File, then Import, locate the Alcatel-tab 7 archive you downloaded from below, pass it as it is, don’t UNZIP it
Optionally, you can pass the Serial number of the device if you want,and the CU reference in this case, T105-3AALEU1, I didn’t pass either of them, but the CU reference was added under the model number in the about tablet
Click Start
Wait for the process to complete
If successful proceed to step 15, otherwise, goto step 3 and repeat, which was what happened to me, I repeated it 3 times
Finally, the phone reboots with Alcatel One Touch logo, it will take some time
I was impatient, restarted it, and waited, then rebooted into recovery by using Power & Vol +, and made a factory reset
And Voila.Congrats on restoring your device
I apologize, don't have the right to post external URLS at the moment. Copy and paste without the quotes.
"https://drive.google.com/file/d/1s0wh5NZCNpxG2j7-QneQGYbeB30MlkJr/view?usp=sharing"
"https://drive.google.com/file/d/1CRdXmZ7uQ1LSpgWV5hI-7-3yBgltF7XF/view?usp=sharing"
Hope this helps anyone.
Regards,

Database Info

welcome