Guys, Help, I get to No 3 of the instructions listed below, the box disapears and nothing else happens, any tips on how to over come the problem, keep the suggestions simple please
1. FLASH MAGLDR TO YOUR DEVICE
The Original MAGLDR Thread by Cotulla is *HERE*
NOTE1: LEO512 and LEO1024 are both supported
NOTE2: MAGLDR doesn't replace OSPL/HSPL. It runs in the chain after. So it's safe to install and remove it
NOTE3: You can flash between 1.11, 1.12 and 1.13 versions on Magldr without losing your NAND Rom
1. Synch Phone with PC in Windows Mobile!!! It has to be connected to activesync or WMDC via USB cable
NOTE: As an alternative method to activesync you can restart your phone in Bootloader Mode, then connect the usb cable and wait until 'usb' appears in the bottom half of your phones screen
2. Browse to the folder you extracted your Magldr Package files to on your pc, right click on ROMUpdateUtility.exe and select Run as Administrator
3. Tick the box to confirm you are aware of the risks and select 'Next'
4. Tick the box to confirm you have followed the preperation steps and select 'Next'
* The program will now check the usb connection *
5. Select 'Update'
6. Verify the image you will flash (it should say 2.00.000.0) and Select 'Next'
7. Read the process list and Select 'Next'
8. Your phone will enter BootLoader Mode and the progress will goto 100%
9. Your phone will now Reboot. Congrats, you just flashed MAGLDR.
NOTE: To Enter MAGLDR Menu Screen after installation, Long Hold the Power Button when resetting the phone and the menu will appear
Guys, Help, I get to No 3 of the instructions listed below, the box disapears and nothing else happens, I have downloaded from the links from here http://forum.xda-developers.com/showthread.php?t=893948, from these links
3. Download MAGLDR 1.13 package from *HERE* and extract to an empty folder on your pc
4. Download a NAND Android ROM from *THIS* Forum and extract to an empty folder on your pc any tips on how to over come the problem, keep the suggestions simple please
I've followed the instructions, but keep failing at No3 ....
Please help, lol, and keep it simple lol
1. FLASH MAGLDR TO YOUR DEVICE
The Original MAGLDR Thread by Cotulla is *HERE*
NOTE1: LEO512 and LEO1024 are both supported
NOTE2: MAGLDR doesn't replace OSPL/HSPL. It runs in the chain after. So it's safe to install and remove it
NOTE3: You can flash between 1.11, 1.12 and 1.13 versions on Magldr without losing your NAND Rom
1. Synch Phone with PC in Windows Mobile!!! It has to be connected to activesync or WMDC via USB cable
NOTE: As an alternative method to activesync you can restart your phone in Bootloader Mode, then connect the usb cable and wait until 'usb' appears in the bottom half of your phones screen
2. Browse to the folder you extracted your Magldr Package files to on your pc, right click on ROMUpdateUtility.exe and select Run as Administrator
3. Tick the box to confirm you are aware of the risks and select 'Next'
4. Tick the box to confirm you have followed the preperation steps and select 'Next'
* The program will now check the usb connection *
5. Select 'Update'
6. Verify the image you will flash (it should say 2.00.000.0) and Select 'Next'
7. Read the process list and Select 'Next'
8. Your phone will enter BootLoader Mode and the progress will goto 100%
9. Your phone will now Reboot. Congrats, you just flashed MAGLDR.
NOTE: To Enter MAGLDR Menu Screen after installation, Long Hold the Power Button when resetting the phone and the menu will appear
Zeki TB782B/TB1082B is using the Allwinner Chip A10.
I search in the web and found the Rom flash steps
Flash Tool LivesuitPack
http://hotfile.com/dl/136803097/cffe5ab/LiveSuitPack_v1.07_usb_drivers.rar.html
The flash ROM Demo video
http://www.youtube.com/watch?v=238RR-WvhrQ
You can get the Rom at below link
http://depositfiles.com/files/u7ew46yzm
FID HN TB1082B ROM
http://depositfiles.com/files/ay9hhvpyf
FID CF TB782B ROM
http://depositfiles.com/files/0wopipacg
FID BN TB1082B ROM
http://depositfiles.com/files/4uoxkwjc4
FIB BN TB782B ROM
1.Required files: Upgrade tool (Livesuit.exe)
2. Make sure your tablet is fully charged
3. Backup your data, device will be formatted during upgrade
4. The driver and upgrade software work for both Windows XP and Windows 7.
Upgrade Steps:
1. Unzip the upgrade tool and USB drive to your hard drive (recommend to put it in C:\ ).
Double-click the LiveSuitPack_v1.07.exe file, it will automatically install the driver files. Click “OK” to complete the driver installation.
2. Open Livesuit.exe
Double-click to open the upgrade tool LiveSuit.exe
3. Select the firmware
Click “No” to not choose the user upgrade wizard, and click the “Select Firmware” button (the first button from the left) to select the firmware .img file.
4. Turn off your tablet
Make sure the tablet is powered off (Turn it on, press the power button for more than 8 seconds to force power off)
5. Press the key combination to start it in the upgrade mode
a. Press and hold down the “Vol +”, button on TB782B,TB892B or “Home” button on TB1082B
b. Connect the USB cable to tablet and computer
c. After connecting the USB cable, press the power button 6 times quickly (you should get a popup window if done correctly, if not repeat step 5 from beginning)
d. DON’T release the “Vol+” button till the LiveSuit window pops up
e. You can now release the “Vol+” button
(Note: If you install the driver at this time the pop-up dialog box, the path to point to installation directory UsbDriver Livesuit folder, click Next to complete the driver installation prompts).
You should see Livesuit window pops up; otherwise, you didn’t do it correctly, you have to repeat step 4 and 5.
6. Select the format to force upgrade
Livesuit prompt “force format”, click “Yes” (Y). All of the original apps installed will be removed.
We highly recommend mandatory format! ! ! Otherwise the update is not complete and may brick! ! !
7. Upgrade begins
Pop-up “OK to force format” dialog box, select “Yes”, the upgrade begins:
8. The upgrade is complete
Firmware download process lasted about three and a half minutes or so, please wait until the prompt “upgrade successful.”
9. Automatic restart
After the upgrade is complete, your tablet will automatically restart, then you can unplug the USB cable.
Slow start-up time machine for the first time, please be patient.
If the machine does not restart automatically, press and hold the Power button for 8-10 seconds or more to ensure the power switch off, then press the Power button 3 seconds or more to turn on your tablet.
10. Congratulations! You have flashed the firmware.
you can get the Google Play at below link
http://forum.xda-developers.com/showthread.php?t=1621831
Do you have one for FID BN?
Sent from my GT-S5830 using xda app-developers app
Fid bn tb782b?
Need the ROM for FID BN TB782B, Can someone help so I can unbrick my Zeki 7? Thanks!
Thanks alot
I was searching for these ROM from along time. You saved my tablet.
in need of some help
Hello!
I bought 3 zeki tablets for my kids for xmas. I was able to follow another thread to put google play on them, and 2 of the 3 work great.
One of the tablets keeps freezing though. I did a factory reset, but in doing so, google play update stayed. So I found this thread and tried to follow the directions above.
Now I can't even get the tablet to turn on. :/
I am assuming it is something I did, and I am hoping that someone can help.
Thank you in advance!!
What's the FID shown on the back case.
Sent from my GT-N7000 using xda premium
Does this firmware add any new features? Also does the android version change?
Sent from my GT-S5830 using xda premium
Reflash the rom
Sent from my GT-N7000 using xda premium
All the rom is Andriod 4.04
Sent from my GT-N7000 using xda premium
Please help
cablepama said:
Zeki TB782B/TB1082B is using the Allwinner Chip A10.
I search in the web and found the Rom flash steps
Flash Tool LivesuitPack
http://hotfile.com/dl/136803097/cffe5ab/LiveSuitPack_v1.07_usb_drivers.rar.html
The flash ROM Demo video
http://www.youtube.com/watch?v=238RR-WvhrQ
You can get the Rom at below link
http://depositfiles.com/files/u7ew46yzm
FID HN TB1082B ROM
http://depositfiles.com/files/ay9hhvpyf
FID CF TB782B ROM
http://depositfiles.com/files/0wopipacg
FID BN TB1082B ROM
http://depositfiles.com/files/4uoxkwjc4
FIB BN TB782B ROM
1.Required files: Upgrade tool (Livesuit.exe)
2. Make sure your tablet is fully charged
3. Backup your data, device will be formatted during upgrade
4. The driver and upgrade software work for both Windows XP and Windows 7.
Upgrade Steps:
1. Unzip the upgrade tool and USB drive to your hard drive (recommend to put it in C:\ ).
Double-click the LiveSuitPack_v1.07.exe file, it will automatically install the driver files. Click “OK” to complete the driver installation.
2. Open Livesuit.exe
Double-click to open the upgrade tool LiveSuit.exe
3. Select the firmware
Click “No” to not choose the user upgrade wizard, and click the “Select Firmware” button (the first button from the left) to select the firmware .img file.
4. Turn off your tablet
Make sure the tablet is powered off (Turn it on, press the power button for more than 8 seconds to force power off)
5. Press the key combination to start it in the upgrade mode
a. Press and hold down the “Vol +”, button on TB782B,TB892B or “Home” button on TB1082B
b. Connect the USB cable to tablet and computer
c. After connecting the USB cable, press the power button 6 times quickly (you should get a popup window if done correctly, if not repeat step 5 from beginning)
d. DON’T release the “Vol+” button till the LiveSuit window pops up
e. You can now release the “Vol+” button
(Note: If you install the driver at this time the pop-up dialog box, the path to point to installation directory UsbDriver Livesuit folder, click Next to complete the driver installation prompts).
You should see Livesuit window pops up; otherwise, you didn’t do it correctly, you have to repeat step 4 and 5.
6. Select the format to force upgrade
Livesuit prompt “force format”, click “Yes” (Y). All of the original apps installed will be removed.
We highly recommend mandatory format! ! ! Otherwise the update is not complete and may brick! ! !
7. Upgrade begins
Pop-up “OK to force format” dialog box, select “Yes”, the upgrade begins:
8. The upgrade is complete
Firmware download process lasted about three and a half minutes or so, please wait until the prompt “upgrade successful.”
9. Automatic restart
After the upgrade is complete, your tablet will automatically restart, then you can unplug the USB cable.
Slow start-up time machine for the first time, please be patient.
If the machine does not restart automatically, press and hold the Power button for 8-10 seconds or more to ensure the power switch off, then press the Power button 3 seconds or more to turn on your tablet.
10. Congratulations! You have flashed the firmware.
you can get the Google Play at below link
http://forum.xda-developers.com/showthread.php?t=1621831
Click to expand...
Click to collapse
i cant install the driver
am formated the pc and also tried in another pc
please help me
Pratheesh T K said:
i cant install the driver
am formated the pc and also tried in another pc
please help me
Click to expand...
Click to collapse
I am in desperate need of a rom dump or even just the ft5x_ts.ko from a non 4.04 upgraded version of the Zeki TB 782B. If anyone reads this anymore and has one that has no been updated please send me a reply, I have found a way to repair ALL currupted FT5x touch panels but need an unmodified module to verify the process will work on other models as well.
Thanks.
i have the Zeki Quad Core 4.4.2 Android Tablet and i rooted it but now im looking for a custom recovery that supports my device can anyone help?
Link dead
This link is no longer work
Flash Tool LivesuitPack
http://hotfile.com/dl/136803097/cffe...ivers.rar.html
Dose anyone have new link that works or where I can find the tool
Not Working Getting Stuck @ 51%
cablepama said:
Zeki TB782B/TB1082B is using the Allwinner Chip A10.
I search in the web and found the Rom flash steps
Flash Tool LivesuitPack
http://hotfile.com/dl/136803097/cffe5ab/LiveSuitPack_v1.07_usb_drivers.rar.html
The flash ROM Demo video
http://www.youtube.com/watch?v=238RR-WvhrQ
You can get the Rom at below link
http://depositfiles.com/files/u7ew46yzm
FID HN TB1082B ROM
http://depositfiles.com/files/ay9hhvpyf
FID CF TB782B ROM
http://depositfiles.com/files/0wopipacg
FID BN TB1082B ROM
http://depositfiles.com/files/4uoxkwjc4
FIB BN TB782B ROM
1.Required files: Upgrade tool (Livesuit.exe)
2. Make sure your tablet is fully charged
3. Backup your data, device will be formatted during upgrade
4. The driver and upgrade software work for both Windows XP and Windows 7.
Upgrade Steps:
1. Unzip the upgrade tool and USB drive to your hard drive (recommend to put it in C:\ ).
Double-click the LiveSuitPack_v1.07.exe file, it will automatically install the driver files. Click “OK” to complete the driver installation.
2. Open Livesuit.exe
Double-click to open the upgrade tool LiveSuit.exe
3. Select the firmware
Click “No” to not choose the user upgrade wizard, and click the “Select Firmware” button (the first button from the left) to select the firmware .img file.
4. Turn off your tablet
Make sure the tablet is powered off (Turn it on, press the power button for more than 8 seconds to force power off)
5. Press the key combination to start it in the upgrade mode
a. Press and hold down the “Vol +”, button on TB782B,TB892B or “Home” button on TB1082B
b. Connect the USB cable to tablet and computer
c. After connecting the USB cable, press the power button 6 times quickly (you should get a popup window if done correctly, if not repeat step 5 from beginning)
d. DON’T release the “Vol+” button till the LiveSuit window pops up
e. You can now release the “Vol+” button
(Note: If you install the driver at this time the pop-up dialog box, the path to point to installation directory UsbDriver Livesuit folder, click Next to complete the driver installation prompts).
You should see Livesuit window pops up; otherwise, you didn’t do it correctly, you have to repeat step 4 and 5.
6. Select the format to force upgrade
Livesuit prompt “force format”, click “Yes” (Y). All of the original apps installed will be removed.
We highly recommend mandatory format! ! ! Otherwise the update is not complete and may brick! ! !
7. Upgrade begins
Pop-up “OK to force format” dialog box, select “Yes”, the upgrade begins:
8. The upgrade is complete
Firmware download process lasted about three and a half minutes or so, please wait until the prompt “upgrade successful.”
9. Automatic restart
After the upgrade is complete, your tablet will automatically restart, then you can unplug the USB cable.
Slow start-up time machine for the first time, please be patient.
If the machine does not restart automatically, press and hold the Power button for 8-10 seconds or more to ensure the power switch off, then press the Power button 3 seconds or more to turn on your tablet.
10. Congratulations! You have flashed the firmware.
you can get the Google Play at below link
http://forum.xda-developers.com/showthread.php?t=1621831
Click to expand...
Click to collapse
I have run the Livesuite and it appears to not work and I have been stuck for quite sometime. I need some help with getting a proper working image I was going to try to use:
FID BN TB1082B ROM
http://depositfiles.com/files/4uoxkwjc4
but the link is no longer active and would I haven't been able to use my tablet the other link is where it get stuck at 51% when trying to transfer the image
http://depositfiles.com/files/ay9hhvpyf
FID CF TB782B ROM
from this one and always gets stuck in the loading process of 51%
any other help with a link to the original image would be greatly appreciated. Thank you in advance!
Captiva 10 Inch Tablet
Modell CAPTIVA PAD 10
Android: 4.1.1
Kernel Version: 3.0.8+ [email protected] #29
Build-Number: RK30_ANDROID4.1.1-SDK-v1.00.00
ruifu_V2.60.20121105.dc72a7b
Well i did a dump from the Captiva 10 Inch Tablet. We had two, one died so we did a dump from the working one and put it back to the dead one and it is working again.
So now I want to share with you, how it worked for me, and of course the working system dump.
So if one Captiva Tablet isn’t working anymore turn it off.
After that do the following steps:
1. Load the 7-Zip file and extract it.
2. After that turn off the Captiva tablet.
3. Insert a Micro USB cable in your computer.
4. Hold Vol+ and put in the Micro USB cable in the USB Port on tablet side (not the “Host” port).
Now Windows should try to find a driver for the new unknown device.
5. So open up the device manager of your Windows system.
6. Right klick on the Unknown Device and update the driver manually.
You will find the driver in the Android Tool Folder which is included in the downloaded File.
Depending on your local Windows take the x86 or x64 driver.
7. After you installed the driver manually, you should see the device as a new class usb device, in this case “rockusb device” or like “rk30sdk”.
8. Next step is to open the “AndroidTool.exe”.
9. The bottom should display “Found One LOADER Device”.
10. You need to deactivate the “Loader”, “Resoruce” and “Parameter” in the Tool.
11. Next you change the path of “Kernel”, “Boot”, “Misc”, “Recovery” and “System”.
12. Just doubleclick on the Path to change it manually or click on the right field of the changing part and a pop-up windows displays your windows explorer, so you get manually the way through the explorer to the extracted file from our downloaded file.
13. I deleted the not necessary parts in my example. Even don’t wonder of the “No devices found”, because I did connect the captiva tablet to my computer for the tutorial.
14. After you changed everything like on my screenshot (Folderpaths can be different), click on “RUN”.
15. The tool will copy every IMG to the tablet.
16. After it finished your tablet should start again.
17. Please disconnect it from the USB cable.
18. Turn the Tablet off.
19. Hold the Vol+ and put in the Power Adapter.
20. Still Hold Vol+ and Push the Power Button.
21. The Tablet should start into Recovery. If there is an android with a red Triangle – You are in the recovery mode. If not, try again.
22. To go on push Power Button and Vol+ one time together.
23. The menu of the recovery should appear and just go to “Wipe Factory Reset” with the Vol+ and Vol- Button.
24. Press the Power button for Enter the Factory Reset.
25. Accept the Reset.
26. After that Reboot System.
27. Congrats. The Tablet should start normally.
Download: well i am new, so not able to post external links... please contact me so i will forward the link
Name: Neuer Ordner.7z - 212 MB
No Password
No warranty or something else if you damage your ablet. You do it on your own risk.
Hi,
hopefully, you have not already deleted your dump. I happen to have a Captiva Pad 10 which only boots into recovery mode (android with red triangle) and then reboots only to display that android with the red triangle again (boot loop).
Perhaps I can fix this device using your dump. Your help would be greatly appreciated.
Thank you very much in advance and kind regards,
DAC324
Schnapz88 said:
Captiva 10 Inch Tablet
Modell CAPTIVA PAD 10
Android: 4.1.1
Kernel Version: 3.0.8+ [email protected] #29
Build-Number: RK30_ANDROID4.1.1-SDK-v1.00.00
ruifu_V2.60.20121105.dc72a7b
Well i did a dump from the Captiva 10 Inch Tablet. We had two, one died so we did a dump from the working one and put it back to the dead one and it is working again.
So now I want to share with you, how it worked for me, and of course the working system dump.
So if one Captiva Tablet isn’t working anymore turn it off.
After that do the following steps:
1. Load the 7-Zip file and extract it.
2. After that turn off the Captiva tablet.
3. Insert a Micro USB cable in your computer.
4. Hold Vol+ and put in the Micro USB cable in the USB Port on tablet side (not the “Host” port).
Now Windows should try to find a driver for the new unknown device.
5. So open up the device manager of your Windows system.
6. Right klick on the Unknown Device and update the driver manually.
You will find the driver in the Android Tool Folder which is included in the downloaded File.
Depending on your local Windows take the x86 or x64 driver.
7. After you installed the driver manually, you should see the device as a new class usb device, in this case “rockusb device” or like “rk30sdk”.
8. Next step is to open the “AndroidTool.exe”.
9. The bottom should display “Found One LOADER Device”.
10. You need to deactivate the “Loader”, “Resoruce” and “Parameter” in the Tool.
11. Next you change the path of “Kernel”, “Boot”, “Misc”, “Recovery” and “System”.
12. Just doubleclick on the Path to change it manually or click on the right field of the changing part and a pop-up windows displays your windows explorer, so you get manually the way through the explorer to the extracted file from our downloaded file.
13. I deleted the not necessary parts in my example. Even don’t wonder of the “No devices found”, because I did connect the captiva tablet to my computer for the tutorial.
14. After you changed everything like on my screenshot (Folderpaths can be different), click on “RUN”.
15. The tool will copy every IMG to the tablet.
16. After it finished your tablet should start again.
17. Please disconnect it from the USB cable.
18. Turn the Tablet off.
19. Hold the Vol+ and put in the Power Adapter.
20. Still Hold Vol+ and Push the Power Button.
21. The Tablet should start into Recovery. If there is an android with a red Triangle – You are in the recovery mode. If not, try again.
22. To go on push Power Button and Vol+ one time together.
23. The menu of the recovery should appear and just go to “Wipe Factory Reset” with the Vol+ and Vol- Button.
24. Press the Power button for Enter the Factory Reset.
25. Accept the Reset.
26. After that Reboot System.
27. Congrats. The Tablet should start normally.
Download: well i am new, so not able to post external links... please contact me so i will forward the link
Name: Neuer Ordner.7z - 212 MB
No Password
No warranty or something else if you damage your ablet. You do it on your own risk.
Click to expand...
Click to collapse
Can you please send me the link
I finally succeeded it, after literally months of trial and error! So, I am writing this post in hope that someone who wants to install Oreo on Life One X in the future would find this post through Google search.
Here are the steps.
0. From this page (https://forum.xda-developers.com/android/development/rom-official-mados-wiko-fever-clones-t3762800), download the TWRP recovery and the madOS Oreo ROM.
1. Download the BLUEFEVER ROM from this page (https://www.npcglib.org/~stathis/blog/2016/04/13/turned-blu-life-one-x-wiko-fever-4g/).
2. Download the SP Flash Tool from the page above or through Google search. The version I used was 5.1812, which seemed to be the latest version.
3. Download the Universal ROM from this page (https://forum.xda-developers.com/android/development/flashable-wiko-fever-stock-marshmallow-t3720484)
4. The critical things is you should not flash the Universal ROM as it is, because that bricked my One X. You need to copy "preloader_l5460.bin" and "secro.img" from BLUEFEVER in step 1 and overwrite them to the Universal ROM.
5. You need to install the Mediatek Driver. I used "MT65XX USB VCOM" driver. I found it using Google search, but forgot where I got it from. But with that name, I think you can find it.
6. Now start the Flash Tool, and and select the download agent in the Flash Tool directory (MTK_AllInOne_DA.bin), and select the scatter file in the Universal rom (MMX BLU), and then select "Format all + Download". Then, this is very important, press the download button BEFORE connecting the phone, otherwise it will not work.
7. Now, turn off the phone (I mean, power off, not just screen off) and then connect it to the PC. If the tool does not recognise the phone, press volume up + down at the same time when you connect it until the device connected sound comes from Windows.
8. Now the tool flashs the rom. Wait. It may take a few minutes.
9. If it is bricked, just leave it for a month until the battery drains and completely turns off, and then try flashing again.
10. Now, boot up the phone, go to Settings -> About and hit the build number several times to enable the developer menu.
11. In the developer menu, enable OEM unlocking.
12. Now, install the Google USB Driver. This can be easily found through a Google search. You need to get the "platform-tools" directory of the Android SDK, which can also be easily found.
13. Now, turn off the phone, and hold volume up + power button. The phone shows tiny menu (really tiny...). The first is recovery, the second is fast boot, and the third is normal. Choose fast boot. Type "fastboot oem unlock". You need to press the volume up button on the phone now.
14. Now the phone is unlocked. Type "fastboot.exe flash recovery twrp_wiko_fever_oreo.img" to flash the recovery.
15. Restart in the recovery using the 13th step.
16. Go to Wipe -> Format data and format the data, otherwise the recovery will not recognise the storage and will not boot.
17. Go to Open Gapps and get ARM64, 8.1, micro. Editions above micro will NOT install with an error message that says insufficient storage.
18. Now connect the phone to the PC. The TWRP recovery automatically mounts the storage to the PC so that you can copy files into it. Copy the mad OS rom ZIP from step 0 and the OpenGapps from step 17.
19. Flash the two using the install menu of TWRP.
20. Done.
I do not use One X as a phone, so I skipped the radio flashing steps. It currently shows the baseband is unknown. If you want to use the phone feature, I think you need to flash the radio img or something using the instructions somewhere in the linked posts.
Find here SP Flash Tool