Hello, i'm a big problem for my motorola milestone 2 A953, I apologize for my language and my mistakes.
Hello, I recently purchased from eBay Milestone 2 has an English menu and is purchased in the UK, I wanted to upload to the new software CM9 best unless it can not be CM7, and right now I have a problem namely
I have bootloader 70.13, upload the file to the memory card from the CM9 and GAPPS bootloader fires (up arrow + power) via USB to the PC turn on RSD lite version 5.x choose the file with the extension *. SBF and then kicks me out of 100% and I turned on the phone once again turn to the new bootloader and shows the pass. My next step holds the power and turn off phone and then I hit 'x' + power and shows me a screen with an exclamation point in a triangle and android humanoids press volume + camera and then a magnifying glass on the keyboard and nothing happens no fires are no menu is the same I'll do it but as I press the @ button on the keyboard or anything, no menu: (
I did everything the instructions that I found on forum
http://forum.xda-developers.com/showthread.php?t=1338183
1) Install Bootstrap Recovery Droid2
2) Boot into recovery
3) OPTIONALLY: create a backup of your data
4) Choose Install zip from sdcard -> Choose zip from sdcard and select downloaded ZIP file.
5) OPTIONALLY: install Google Apps the same way
6) Wipe data / factory reset
7) Wipe cache partition
8) Reboot and enjoy
9) OPTIONALLY: use attached Baseband app switcher if you have troubles with phone signal.
all worked out, but when I went passed the phone rebote motorola logo and nothing else happens. I do not know how to solve this problem.
I can not run the recovery menu. I can only enter the bootloader version is 70.13.
I would like to upload the software from the Polish language.
Thanks for help.
This isn't the Milestone 2 forum.
Refer to http://forum.xda-developers.com/forumdisplay.php?f=958
Zeki TB782B/TB1082B is using the Allwinner Chip A10.
I search in the web and found the Rom flash steps
Flash Tool LivesuitPack
http://hotfile.com/dl/136803097/cffe5ab/LiveSuitPack_v1.07_usb_drivers.rar.html
The flash ROM Demo video
http://www.youtube.com/watch?v=238RR-WvhrQ
You can get the Rom at below link
http://depositfiles.com/files/u7ew46yzm
FID HN TB1082B ROM
http://depositfiles.com/files/ay9hhvpyf
FID CF TB782B ROM
http://depositfiles.com/files/0wopipacg
FID BN TB1082B ROM
http://depositfiles.com/files/4uoxkwjc4
FIB BN TB782B ROM
1.Required files: Upgrade tool (Livesuit.exe)
2. Make sure your tablet is fully charged
3. Backup your data, device will be formatted during upgrade
4. The driver and upgrade software work for both Windows XP and Windows 7.
Upgrade Steps:
1. Unzip the upgrade tool and USB drive to your hard drive (recommend to put it in C:\ ).
Double-click the LiveSuitPack_v1.07.exe file, it will automatically install the driver files. Click “OK” to complete the driver installation.
2. Open Livesuit.exe
Double-click to open the upgrade tool LiveSuit.exe
3. Select the firmware
Click “No” to not choose the user upgrade wizard, and click the “Select Firmware” button (the first button from the left) to select the firmware .img file.
4. Turn off your tablet
Make sure the tablet is powered off (Turn it on, press the power button for more than 8 seconds to force power off)
5. Press the key combination to start it in the upgrade mode
a. Press and hold down the “Vol +”, button on TB782B,TB892B or “Home” button on TB1082B
b. Connect the USB cable to tablet and computer
c. After connecting the USB cable, press the power button 6 times quickly (you should get a popup window if done correctly, if not repeat step 5 from beginning)
d. DON’T release the “Vol+” button till the LiveSuit window pops up
e. You can now release the “Vol+” button
(Note: If you install the driver at this time the pop-up dialog box, the path to point to installation directory UsbDriver Livesuit folder, click Next to complete the driver installation prompts).
You should see Livesuit window pops up; otherwise, you didn’t do it correctly, you have to repeat step 4 and 5.
6. Select the format to force upgrade
Livesuit prompt “force format”, click “Yes” (Y). All of the original apps installed will be removed.
We highly recommend mandatory format! ! ! Otherwise the update is not complete and may brick! ! !
7. Upgrade begins
Pop-up “OK to force format” dialog box, select “Yes”, the upgrade begins:
8. The upgrade is complete
Firmware download process lasted about three and a half minutes or so, please wait until the prompt “upgrade successful.”
9. Automatic restart
After the upgrade is complete, your tablet will automatically restart, then you can unplug the USB cable.
Slow start-up time machine for the first time, please be patient.
If the machine does not restart automatically, press and hold the Power button for 8-10 seconds or more to ensure the power switch off, then press the Power button 3 seconds or more to turn on your tablet.
10. Congratulations! You have flashed the firmware.
you can get the Google Play at below link
http://forum.xda-developers.com/showthread.php?t=1621831
Do you have one for FID BN?
Sent from my GT-S5830 using xda app-developers app
Fid bn tb782b?
Need the ROM for FID BN TB782B, Can someone help so I can unbrick my Zeki 7? Thanks!
Thanks alot
I was searching for these ROM from along time. You saved my tablet.
in need of some help
Hello!
I bought 3 zeki tablets for my kids for xmas. I was able to follow another thread to put google play on them, and 2 of the 3 work great.
One of the tablets keeps freezing though. I did a factory reset, but in doing so, google play update stayed. So I found this thread and tried to follow the directions above.
Now I can't even get the tablet to turn on. :/
I am assuming it is something I did, and I am hoping that someone can help.
Thank you in advance!!
What's the FID shown on the back case.
Sent from my GT-N7000 using xda premium
Does this firmware add any new features? Also does the android version change?
Sent from my GT-S5830 using xda premium
Reflash the rom
Sent from my GT-N7000 using xda premium
All the rom is Andriod 4.04
Sent from my GT-N7000 using xda premium
Please help
cablepama said:
Zeki TB782B/TB1082B is using the Allwinner Chip A10.
I search in the web and found the Rom flash steps
Flash Tool LivesuitPack
http://hotfile.com/dl/136803097/cffe5ab/LiveSuitPack_v1.07_usb_drivers.rar.html
The flash ROM Demo video
http://www.youtube.com/watch?v=238RR-WvhrQ
You can get the Rom at below link
http://depositfiles.com/files/u7ew46yzm
FID HN TB1082B ROM
http://depositfiles.com/files/ay9hhvpyf
FID CF TB782B ROM
http://depositfiles.com/files/0wopipacg
FID BN TB1082B ROM
http://depositfiles.com/files/4uoxkwjc4
FIB BN TB782B ROM
1.Required files: Upgrade tool (Livesuit.exe)
2. Make sure your tablet is fully charged
3. Backup your data, device will be formatted during upgrade
4. The driver and upgrade software work for both Windows XP and Windows 7.
Upgrade Steps:
1. Unzip the upgrade tool and USB drive to your hard drive (recommend to put it in C:\ ).
Double-click the LiveSuitPack_v1.07.exe file, it will automatically install the driver files. Click “OK” to complete the driver installation.
2. Open Livesuit.exe
Double-click to open the upgrade tool LiveSuit.exe
3. Select the firmware
Click “No” to not choose the user upgrade wizard, and click the “Select Firmware” button (the first button from the left) to select the firmware .img file.
4. Turn off your tablet
Make sure the tablet is powered off (Turn it on, press the power button for more than 8 seconds to force power off)
5. Press the key combination to start it in the upgrade mode
a. Press and hold down the “Vol +”, button on TB782B,TB892B or “Home” button on TB1082B
b. Connect the USB cable to tablet and computer
c. After connecting the USB cable, press the power button 6 times quickly (you should get a popup window if done correctly, if not repeat step 5 from beginning)
d. DON’T release the “Vol+” button till the LiveSuit window pops up
e. You can now release the “Vol+” button
(Note: If you install the driver at this time the pop-up dialog box, the path to point to installation directory UsbDriver Livesuit folder, click Next to complete the driver installation prompts).
You should see Livesuit window pops up; otherwise, you didn’t do it correctly, you have to repeat step 4 and 5.
6. Select the format to force upgrade
Livesuit prompt “force format”, click “Yes” (Y). All of the original apps installed will be removed.
We highly recommend mandatory format! ! ! Otherwise the update is not complete and may brick! ! !
7. Upgrade begins
Pop-up “OK to force format” dialog box, select “Yes”, the upgrade begins:
8. The upgrade is complete
Firmware download process lasted about three and a half minutes or so, please wait until the prompt “upgrade successful.”
9. Automatic restart
After the upgrade is complete, your tablet will automatically restart, then you can unplug the USB cable.
Slow start-up time machine for the first time, please be patient.
If the machine does not restart automatically, press and hold the Power button for 8-10 seconds or more to ensure the power switch off, then press the Power button 3 seconds or more to turn on your tablet.
10. Congratulations! You have flashed the firmware.
you can get the Google Play at below link
http://forum.xda-developers.com/showthread.php?t=1621831
Click to expand...
Click to collapse
i cant install the driver
am formated the pc and also tried in another pc
please help me
Pratheesh T K said:
i cant install the driver
am formated the pc and also tried in another pc
please help me
Click to expand...
Click to collapse
I am in desperate need of a rom dump or even just the ft5x_ts.ko from a non 4.04 upgraded version of the Zeki TB 782B. If anyone reads this anymore and has one that has no been updated please send me a reply, I have found a way to repair ALL currupted FT5x touch panels but need an unmodified module to verify the process will work on other models as well.
Thanks.
i have the Zeki Quad Core 4.4.2 Android Tablet and i rooted it but now im looking for a custom recovery that supports my device can anyone help?
Link dead
This link is no longer work
Flash Tool LivesuitPack
http://hotfile.com/dl/136803097/cffe...ivers.rar.html
Dose anyone have new link that works or where I can find the tool
Not Working Getting Stuck @ 51%
cablepama said:
Zeki TB782B/TB1082B is using the Allwinner Chip A10.
I search in the web and found the Rom flash steps
Flash Tool LivesuitPack
http://hotfile.com/dl/136803097/cffe5ab/LiveSuitPack_v1.07_usb_drivers.rar.html
The flash ROM Demo video
http://www.youtube.com/watch?v=238RR-WvhrQ
You can get the Rom at below link
http://depositfiles.com/files/u7ew46yzm
FID HN TB1082B ROM
http://depositfiles.com/files/ay9hhvpyf
FID CF TB782B ROM
http://depositfiles.com/files/0wopipacg
FID BN TB1082B ROM
http://depositfiles.com/files/4uoxkwjc4
FIB BN TB782B ROM
1.Required files: Upgrade tool (Livesuit.exe)
2. Make sure your tablet is fully charged
3. Backup your data, device will be formatted during upgrade
4. The driver and upgrade software work for both Windows XP and Windows 7.
Upgrade Steps:
1. Unzip the upgrade tool and USB drive to your hard drive (recommend to put it in C:\ ).
Double-click the LiveSuitPack_v1.07.exe file, it will automatically install the driver files. Click “OK” to complete the driver installation.
2. Open Livesuit.exe
Double-click to open the upgrade tool LiveSuit.exe
3. Select the firmware
Click “No” to not choose the user upgrade wizard, and click the “Select Firmware” button (the first button from the left) to select the firmware .img file.
4. Turn off your tablet
Make sure the tablet is powered off (Turn it on, press the power button for more than 8 seconds to force power off)
5. Press the key combination to start it in the upgrade mode
a. Press and hold down the “Vol +”, button on TB782B,TB892B or “Home” button on TB1082B
b. Connect the USB cable to tablet and computer
c. After connecting the USB cable, press the power button 6 times quickly (you should get a popup window if done correctly, if not repeat step 5 from beginning)
d. DON’T release the “Vol+” button till the LiveSuit window pops up
e. You can now release the “Vol+” button
(Note: If you install the driver at this time the pop-up dialog box, the path to point to installation directory UsbDriver Livesuit folder, click Next to complete the driver installation prompts).
You should see Livesuit window pops up; otherwise, you didn’t do it correctly, you have to repeat step 4 and 5.
6. Select the format to force upgrade
Livesuit prompt “force format”, click “Yes” (Y). All of the original apps installed will be removed.
We highly recommend mandatory format! ! ! Otherwise the update is not complete and may brick! ! !
7. Upgrade begins
Pop-up “OK to force format” dialog box, select “Yes”, the upgrade begins:
8. The upgrade is complete
Firmware download process lasted about three and a half minutes or so, please wait until the prompt “upgrade successful.”
9. Automatic restart
After the upgrade is complete, your tablet will automatically restart, then you can unplug the USB cable.
Slow start-up time machine for the first time, please be patient.
If the machine does not restart automatically, press and hold the Power button for 8-10 seconds or more to ensure the power switch off, then press the Power button 3 seconds or more to turn on your tablet.
10. Congratulations! You have flashed the firmware.
you can get the Google Play at below link
http://forum.xda-developers.com/showthread.php?t=1621831
Click to expand...
Click to collapse
I have run the Livesuite and it appears to not work and I have been stuck for quite sometime. I need some help with getting a proper working image I was going to try to use:
FID BN TB1082B ROM
http://depositfiles.com/files/4uoxkwjc4
but the link is no longer active and would I haven't been able to use my tablet the other link is where it get stuck at 51% when trying to transfer the image
http://depositfiles.com/files/ay9hhvpyf
FID CF TB782B ROM
from this one and always gets stuck in the loading process of 51%
any other help with a link to the original image would be greatly appreciated. Thank you in advance!
Hi,
I have 2 tablet onda v712 v2. When i try to flash the firmware one of them work succesful and now it's with OS android 4.1.1.
In the another one, in the moment i try to flash i thank that the tablet freeze because the white android robot don't dissappear in a short time (10 secs) y i try to turn off the tablet. So, since i did this, i can't turn on or reflash the tablet again. Please help me.
I try to download PCTool_SPI-1010.rar because i read in another forums (http://forum.xda-developers.com/show....php?t=1921691 ) that flash with this program would help with this, but this software don´t exist anymore (http://translate.google.com/translat...omuid=211902 ).
Here i post the instructions for flash to 4.1.1:
First of all, back up your programs and configuration, because this firmware format your tablet.
1. Go to http://translate.google.cl/translate...nda.cn&act=url and download V712 the double nuclear the version-V2_v2.0 version firmware (applies only to models of V2 version)
2. Decompress and copy to root of sd card all files
3. Turn Off your tablet
4. Insert the sd in tablet
5. press and keep the home button pressed
6. press the power button and keep until white andorid robot appears
7. release home button
8. wait (don't turn off, if not you have the same problem that i)
9. a green android robot apears. Wait.
10. The tablet automatically turn off and automatically turn on, and voila, you have android 4.1.1.
11. First problem: Chineese language. but it's easy to change. (Go to settings, go to red cloud icon in left menu, in right menu select the first option and select your language)
Help me please with my problem!!!!!!
netinhodj said:
Hi,
I have 2 tablet onda v712 v2. When i try to flash the firmware one of them work succesful and now it's with OS android 4.1.1.
In the another one, in the moment i try to flash i thank that the tablet freeze because the white android robot don't dissappear in a short time (10 secs) y i try to turn off the tablet. So, since i did this, i can't turn on or reflash the tablet again. Please help me.
I try to download PCTool_SPI-1010.rar because i read in another forums (http://forum.xda-developers.com/show....php?t=1921691 ) that flash with this program would help with this, but this software don´t exist anymore (http://translate.google.com/translat...omuid=211902 ).
Here i post the instructions for flash to 4.1.1:
First of all, back up your programs and configuration, because this firmware format your tablet.
1. Go to http://translate.google.cl/translate...nda.cn&act=url and download V712 the double nuclear the version-V2_v2.0 version firmware (applies only to models of V2 version)
2. Decompress and copy to root of sd card all files
3. Turn Off your tablet
4. Insert the sd in tablet
5. press and keep the home button pressed
6. press the power button and keep until white andorid robot appears
7. release home button
8. wait (don't turn off, if not you have the same problem that i)
9. a green android robot apears. Wait.
10. The tablet automatically turn off and automatically turn on, and voila, you have android 4.1.1.
11. First problem: Chineese language. but it's easy to change. (Go to settings, go to red cloud icon in left menu, in right menu select the first option and select your language)
Help me please with my problem!!!!!!
Click to expand...
Click to collapse
Any news?
hi guys
I'm in android 4.0 (10.4.4.25) and I want to update to android 4.2 (10.6.1.14.8)
I used to update in this way:
((((Alternative Firmware update Method
1. Decompress downloaded .zip file (it will be another .zip)
2. Rename it to EP201_768_SDUPDATE.zip
3. Format FAT32 the MicroSD card that you will be using for the update process
4. Copy the file to (the root directory of) your MicroSD
5. Insert it into the tablet
6. Shutdown (power off) the tablet
7. Power it on by pressing and holding VOLUME DOWN and POWER buttons simultaneously
8. When you see white text in the top left corner of the screen, release the buttons ^^ and press VOLUME UP button until you see Android logo and process bar
9. Wait patiently for 10 minutes or so))))))
but there is 2 question:
1- I read this thread ((ASUS JellyBean 4.2.1 updates - a warning)) and I want to know if I use that way I sayed, will it be a hard or soft brick for my tf700 or not?(I mean this has the new update the same problem like previous update ?
2- Can I use motochopper in JB 4.2.1 (10.6.1.14.8) to root my device? (my device is unlocked)
(excuse me if my writing has problem,because my English language is not too good.)
nasiroddin said:
hi guys
I'm in android 4.0 (10.4.4.25) and I want to update to android 4.2 (10.6.1.14.8)
I used to update in this way:
((((Alternative Firmware update Method
1. Decompress downloaded .zip file (it will be another .zip)
2. Rename it to EP201_768_SDUPDATE.zip
3. Format FAT32 the MicroSD card that you will be using for the update process
4. Copy the file to (the root directory of) your MicroSD
5. Insert it into the tablet
6. Shutdown (power off) the tablet
7. Power it on by pressing and holding VOLUME DOWN and POWER buttons simultaneously
8. When you see white text in the top left corner of the screen, release the buttons ^^ and press VOLUME UP button until you see Android logo and process bar
9. Wait patiently for 10 minutes or so))))))
but there is 2 question:
1- I read this thread ((ASUS JellyBean 4.2.1 updates - a warning)) and I want to know if I use that way I sayed, will it be a hard or soft brick for my tf700 or not?(I mean this has the new update the same problem like previous update ?
Click to expand...
Click to collapse
I'm not sure what you are trying to ask here -- let me read the thread again. EDIT: you'll be fine -- the issue is/was not with being unlocked but with having a custom recovery that was outdated and couldn't handle the new partition structure correctly. As long as you have the stock recovery (which is the only one that will allow this auto-update route anyway ) you shouldn't run into strange problems as long as you follow the procedure to the letter.
2- Can I use motochopper in JB 4.2.1 (10.6.1.14.8) to root my device? (my device is unlocked)
Click to expand...
Click to collapse
Yes, that should root your 700.
(excuse me if my writing has problem,because my English language is not too good.)
Click to expand...
Click to collapse
Greetings from Portugal.
I have a tablet made by the spanish toy manufacturer Imaginarium.
It's a tablet for kids, with special software for them. It also has android on it.
I was trying to update the android version it run on but I seem to have bricked it.
I uninstalled a few apps and now it doesn't starts. It just keeps running the start procedure but it doesn't complete the process so I can not use it.
In fact, I cannot even update the firmware because it doesn't allow me to start the process by simultaneously pressing the MENU, BACK and RESET buttons.
I'm also having trouble installing the drivers for the update tool, the RockUsbDriver for win7.
It shows an error message saying "the inf file you selected does not support this method of installation".
So I was wondering if there is any tool that allows me to hard reset any device, as I don't believe there is a tool for this device.
(I have a new firmware ready to install on it)
As a matter of fact, I don't even know witch hardware we're talking about,,, The only name this has is Superpaquito.
Thanks for your time!
additional info: if I press MENU + POWER buttons, a laying down android figure is showed, with its 'chest' open and with a 'danger' triangular sign on top of it,
Imaginarium Superpaquito Factory Reset
Hello, i was fighting a lot with this problem too but i have a solution for your problem
It's just a few steps :
The superpaquito must be off, and connected to charger:
1. Push 5 buttons (volume down, volume up, on / off, menu and back) at the same time until the screen with the android robot appears.
2. Push the button volume up and the on / off at the same time until you exit a menu with text in blue at the top of the screen.
3 Go to "wipe data / Factory rest" (move with the volume buttons +-) and select with the buttons on / off.
4 select the option "Yes - delete all user data".
5 The superpaquito restore factory settings and return to the original menu.
6. Select "reboot system now" and your device will reboot.
I hope it helped and that you didn't needed to buy a new one
I' having some issues with paquito mini, I tried to reset, went to store, sent email to spain no way to get an answear... How can I reset paquito mini? Can you help me?
What's the latest firmware update for the Paquito Mini?
Cheers
i need custum rom