I need a help!!! motorola milestone 2 A953.

I need a help!!! motorola milestone 2 A953. - Droid 2 Global General

Hello, i'm a big problem for my motorola milestone 2 A953, I apologize for my language and my mistakes.
Hello, I recently purchased from eBay Milestone 2 has an English menu and is purchased in the UK, I wanted to upload to the new software CM9 best unless it can not be CM7, and right now I have a problem namely
I have bootloader 70.13, upload the file to the memory card from the CM9 and GAPPS bootloader fires (up arrow + power) via USB to the PC turn on RSD lite version 5.x choose the file with the extension *. SBF and then kicks me out of 100% and I turned on the phone once again turn to the new bootloader and shows the pass. My next step holds the power and turn off phone and then I hit 'x' + power and shows me a screen with an exclamation point in a triangle and android humanoids press volume + camera and then a magnifying glass on the keyboard and nothing happens no fires are no menu is the same I'll do it but as I press the @ button on the keyboard or anything, no menu: (
I did everything the instructions that I found on forum
http://forum.xda-developers.com/showthread.php?t=1338183
1) Install Bootstrap Recovery Droid2
2) Boot into recovery
3) OPTIONALLY: create a backup of your data
4) Choose Install zip from sdcard -> Choose zip from sdcard and select downloaded ZIP file.
5) OPTIONALLY: install Google Apps the same way
6) Wipe data / factory reset
7) Wipe cache partition
8) Reboot and enjoy
9) OPTIONALLY: use attached Baseband app switcher if you have troubles with phone signal.
all worked out, but when I went passed the phone rebote motorola logo and nothing else happens. I do not know how to solve this problem.
I can not run the recovery menu. I can only enter the bootloader version is 70.13.
I would like to upload the software from the Polish language.
Thanks for help.

This isn't the Milestone 2 forum.
Refer to http://forum.xda-developers.com/forumdisplay.php?f=958

Related

A2107A-H Firmware update, Custom Rom and CWM Recovery (calling feature - unlocked)

Finally it happend, NEW CUSTOM ROM (CWM Backup Mode) made by me.
screenshots
https://www.dropbox.com/sh/yc7z5904i0e1ua6/6FSVniszMM#/
Just see it in action: http://www.youtube.com/watch?v=joeJtkw-85c
- CWM Recovery
- Firmware version S314
- Calling feature
- Fully working google service
- Fully Roted
- Titanum Backup
- TouchPal Keyboard
- Stock Browser
- Full synchronization with google service
- Radio without headphones
and many more
The installation is very simple and will take about 5 minutes if you already have a CWM Recovery
I spend nearly whole week to build this customisation, so I decide to ask you guys for some support for my work. So if you like the job I done so far and want to see a new improvements in a future including a Jelly Bean on Lenovo A2107A-H please support me. In this case I made a auction on a EBAY for this modiffication and it will cost just a £5. Please respect my work and don't distribute my mod behind my back. If you not agreed with this, I waiting for your coments guys. Thank you.
http://www.ebay.co.uk/itm/221163148...l?_sacat=0&_from=R40&_nkw=221163148891&_rdc=1
I will send you a link to a firmware and manual after a payment
Enjoy!!!
OLD MANUAL (no files on a server)
Manual and files for installation Custom ROM + CWM Recovery + IMEI repair + ROOT + Calling Feature on IdeaPad A2107A-H
Password for archive:"xdadevpemergency"
Firmware
1. CWM Recovery ROM.
https://rapidshare.com/files/3358458529/CWM Firmware.zip
2. A2107A-H v9 ROM in a zip format for install by CWM Recovery.
https://rapidshare.com/files/241044528/A2107A-H v9.zip
3. Google apps for google store and account sync (installation by CWM Recovery)
https://rapidshare.com/files/2713449644/gapp-ics.zip
Tools
1. SP Flash Tool for formating device NAND FLASH.
https://rapidshare.com/files/1465167471/SP_Flash_Tool_v3.1206.01.zip
2. Smarthphone Multiport for Flash the CWM REcovery ROM.
https://rapidshare.com/files/2880421726/SP_MDT_src_v3.1216.02_A2012.05.22.zip
3. MTK Droid Tools for easy IMEI repair and easy ROOT install.
https://rapidshare.com/files/3431631170/MTKdroidTools.zip
Manual
Device formating
1. Open SP Flash Tool
2. Choose a "Scatter-loading" file from "CWM Recovery ROM" folder
3. Press "Format" in a left top corner of SP Flash Tool
4. Choose "Auto Format Nand Flash" -> "Format whole flash" and press "OK"
5. Connect device to PC, press "reset" button on a back of your device
Your device should be formated on this point.
6. Close SP Flash Tool
Installing CWM Recovery ROM
1. Open Smartphone Multiport
2. Press the "Scatter File" button and choose this file from a CWM Recovery ROM folder
3. Tick to both "Sel All"
Settings for Smartphone Multiport:
Type: Firmware upgrade
Baud rate: 921600
DA download all: High speed
USB Port: BootRom --->DA
4. Press Start all
On this point firmware should be downloaded on your decive, if nothing happend press the "reset button" on a back of your device.
After this operation you will have a CWM Recovery, but not a main firmware!!!
Installing main firmware
1. Copy A2107A-H v9.zip and gapp-ics.zip to sd card.
2. Boot in to CWM Recovery mode by:
- Press the "reset" button on your device
- Press and hold for a 3 sec. "power" button on your device (after 3 sec. releas the buton)
- When you see "lenovo" logo press and hold vol+ and vol- untill you will boot in to CWM Recovery mode
In a CWM Recovery Mode
Menu down = vol-
Menu up= vol+
accept= power button
1. Choose "wipe data/factory reset"
2. Choose "wipe cache partition"
3. Choose "Advanced" -> "Wipe Dalvik Cache"
4. Go to main menu of CWM Recovery mode
5. Choose "install zip from sdcard"
6. Choose "choose zip from sdcard"
7. Find the A2107A-H v9.zip file.
8. Choose "Yes - Install A2107A-H v9.zip"
Do the same think with gapp-ics.zip and reboot your device.
IMEI repair and ROOT installation
1. Connect your device to the PC (device must be turned on and connected as "USB debugging" and "Media device)
2. Start MTK Droid Tools
3. Press Replace IMEI (fill up IMEI 1 and IMEI 2) and save
4. Reboot device
On this point you should have a IMEI working, if not repeat IMEI repair from point 3.
5. Press ROOT button if the program ask for anythink press "YES" (your device will reboot 2 or 3 times and it will be ready to go).
Click to expand...
Click to collapse

Reupload Please

Please reupload the tools section.
Thank you in advance

I will but I dont know where, they was on rapidshare, Blocked already, on a dropbox, blocked already. Any ideas where to upload them?

pemergency said:
I will but I dont know where, they was on rapidshare, Blocked already, on a dropbox, blocked already. Any ideas where to upload them?
Click to expand...
Click to collapse
Hi there,
Can you try http://uploaded.net/ ?
I used it for many files so far and seems to work OK.
Thank you.

re
yesterday on Chinese side get everything.
flashed - rom (lots of Chinese garbage) does - only Chinese and English.
English also very buggy - phone goes.
sorry ... google translator

.................................................

german language ?

Yes for settings and all stock app. All apps added by myself are not translated
Sent from my GT-N7000 using xda app-developers app

brief assessment of the costum rom "pemergency" mod = which must be paid
- Setup / flash -> OK
- IMEI must be corrected manually by terminal as tool does not work
- Constant error message "simcard failed" (slot2) although only 1 slot has
- "apex launcher" can not uninstall, then stops at the boot process lenovo screen -> I would also like to use but "default / original" surface.
- Spoke only Russian / English / chinese integrated as standart
- Morelocale2 indeed is an alternative but not "original"
ok, first feedback - hope the rom is modified?

mrbonsen said:
brief assessment of the costum rom "pemergency" mod = which must be paid
a) Setup / flash -> OK
b) IMEI must be corrected manually by terminal as tool does not work
c) Constant error message "simcard failed" (slot2) although only 1 slot has
d) "apex launcher" can not uninstall, then stops at the boot process lenovo screen -> I would also like to use but "default / original" surface.
e) Spoke only Russian / English / chinese integrated as standart
f) Morelocale2 indeed is an alternative but not "original"
ok, first feedback - hope the rom is modified?
Click to expand...
Click to collapse
a) no comment
b) IMEI must be corrected and it is mentioned in a manual, it doesnt need to be done by terminal, you can simple generate a file and swap with a root explorer
c) This Rom is for A2107a-h which is a 2 slots device, so I dont see a problem on this point
d) I said as this is modiffication, I decide to remove a stock launcher, you can install any other one of your choice
e) I also answered to your question as for german language only original apps are translated and the main system, on other threeead is clearlly said as this rom using more locale 2 for translation.
f) and as a last one, why you expecting anything original in a modiffied ROM?
I stoping to doing anything with this ROM for a simple reason:
- FREE ROM = 900 downloads,
- PAID ROM FOR £5 = 5 downloads - embarrassing
Why?
and one more thing...
My correspondence with mrbonsen, when I tried to help him out with the installation process is also interesting. About 10 emails with instructions to mrbonsen and also 10 emails of insults from mrbonsen. That means something....
So conclusion is simply... go back to your original firmware and I will give you your £5 back

and also 10 emails of insults from mrbonsen.
Click to expand...
Click to collapse
I would, at least at three mail the conversation ended :victory:
b) IMEI must be corrected and it is mentioned in a manual, it doesnt need to be done by terminal, you can simple generate a file and swap with a root explorer
Click to expand...
Click to collapse
if you tool mitsendest + description for the correction of the IMEI, it should work well. not every user knows another solution
But no matter now - can only recommend not to use this rom :good:
ask no insult but (as in the mails) what's wrong on the screen, apex launcher bug or "bug mrbonsen" - display does not turn or apex

mrbonsen said:
I would, at least at three mail the conversation ended :victory:
if you tool mitsendest + description for the correction of the IMEI, it should work well. not every user knows another solution
But no matter now - can only recommend not to use this rom :good:
ask no insult but (as in the mails) what's wrong on the screen, apex launcher bug or "bug mrbonsen" - display does not turn or apex
Click to expand...
Click to collapse
Hehe, ok, this is all my fault, I just should expecting as this ROM could be installed by a persona like you, my bad
BTW I using this ROM from a weak or more and have no problem at all. Waiting for comment from other users ...
Sent from my IdeaTab A2107A-H using XDA Premium HD app

And one more thing, what model do you have? if anything was wrong you could always ask, you didn't so....
Sent from my IdeaTab A2107A-H using XDA Premium HD app

pemergency said:
And one more thing, what model do you have? if anything was wrong you could always ask, you didn't so....
Sent from my IdeaTab A2107A-H using XDA Premium HD app
Click to expand...
Click to collapse
You did a great job and 900 downloads are impressive. i have a A2107A-H 1GHz 1GB RAM 16GB Flash - how come nobody is providing feedback or helping out in this development? Could there be a way to update.zip just the standard factory ROM? maybe that could be possible by doing a diff on the chinese and european source code? sorry i'm just a lamer looking to help out. any news from lenovo developers on the 4.1 release?
today is your cwm rom accessible for download for trial?

Ofcourse it is possible to get back the standard ROM just ask someone who still have a European ROM to do a copy by nandroid backup and you can restore this by centeCWM. So after that you will have a stock ROM with CWM but without calling feature.
I nearly finish another ROM with calling feature but this will be based on Russian ROM. I just need to get European system backup to do it same thing with European ROM.
Sent from my IdeaTab A2107A-H using XDA Premium HD app

Password for CWM Firmware : xdadevpemergency
NEW MANUAL AND FILES (discontinued project)
For both option's copy "clockworkmode/backup/modpemergency" folder to sdcard internal or external!!!
OPTION 1: For CWM Recovery devices:
Downloads:
Pemergency MOD custom firmware https://hotfile.com/dl/182755080/f7d30b5/07122012.rar.html
1. Unpack archive 07122012.rar
2. Copy whole folder clockworkmode to your internal storage or external sdcard.
It should looks like this one:
/sdcard/clockworkmode/backup/modpemergency (nandroid.md5 and system.ext4.tar inside this folder)
Boot in to CWM Recovery:
1. switch off dfevice
2. Hold Power Button for 3 sek, release and hold vol+ and - together untill you will boot in to recovery mod
In CWM Recovery:
1. Choose "backup and restore"
2. Choose "advanced restore from internal sdcard" or "advanced restore" in a case of using external card
3. Choose "modpemergency/"
4. Choose "Restore system"
5. Choose "Yes - Restore System"
After update choose
1. "wipe data/factory reset"
2. "wipe cache partition"
4. "advanced/wipe dalvik"
5. reboot.
It will take a while to boot for a first time so no worries
OPTION 2: For non CWM recovery devices
Copy clockworkmode/backup/modpemergency to your external card, it should looks like this:
/sdcard/clockworkmode/backup/modpemergency (nandroid.md5 and system.ext4.tar inside this folder)
downloads:
1. CWM Recovery https://hotfile.com/dl/182805290/fe4ac19/CWM_Firmware.zip.html
2. Flash Tools https://hotfile.com/dl/182820835/8dd3c06/Tools.rar.html
3. New Flash Tool without error (replacement for the one from Tools.rar package https://hotfile.com/dl/183057140/692cbbb/SP_MDT_src_v3.1216.02_A2012.05.22.zip.html
4. Pemergency MOD custom firmware https://hotfile.com/dl/182755080/f7d30b5/07122012.rar.html
5. USB Driver
For windows xp https://hotfile.com/dl/182950442/360c725/USB_VCOM_Driver.zip.html
For windows seven https://hotfile.com/dl/182950251/0c9ee3d/usb_driver.zip.html
Install CWM Recovery:
Device formating
1. Open SP Flash Tool
2. Choose a "Scatter-loading" file from "CWM Recovery ROM" folder
3. Press "Format" in a left top corner of SP Flash Tool
4. Choose "Auto Format Nand Flash" -> "Format whole flash" and press "OK"
5. Connect device to PC, press "reset" button on a back of your device
Your device should be formated on this point.
6. Close SP Flash Tool
Installing CWM Recovery ROM
1. Open Smartphone Multiport
The "Data source file" and "Da file name" should have assigned path from SP_MDT_src_v3.1216.02_A2012.05.22 folder. If is not assigned properly please do the folowing steps:
- File/Open Download Agent File and choose file MTK_DATABASE.mdb from SP_MDT_src_v3.1216.02_A2012.05.22 folder
and
- Factory database/Setup data source file and choose file MTK_AllInOne_DA.bin from SP_MDT_src_v3.1216.02_A2012.05.22 folder
2. Press the "Scatter File" button and choose this file from a CWM Recovery ROM folder
3. Tick to both "Sel All"
Settings for Smartphone Multiport:
Type: Firmware upgrade
Baud rate: 921600
DA download all: High speed
USB Port: BootRom --->DA
4. Press Start all
On this point firmware should be downloaded on your decive, if nothing happend press the "reset button" on a back of your device.
After this operation you will have a CWM Recovery, but not a main firmware!!!
Install pemergency custom ROM
1. Unpack archive 07122012.rar
2. Copy whole folder clockworkmode to your external sdcard.
Boot in to CWM Recovery:
1. switch off dfevice
2. Hold Power Button for 3 sek, release and hold vol+ and - together untill you will boot in to recovery mod
In CWM Recovery:
1. Choose "backup and restore"
2. Choose "advanced restore"
3. Choose "modpemergency/"
4. Choose "Restore system"
5. Choose "Yes - Restore System"
After update choose
1. "wipe data/factory reset"
2. "wipe cache partition"
4. "advancedwipe dalvik"
5. reboot.
It will take a while to boot for a first time so no worries
After that sometimes it is nessesary to repair IMEI
IMEI repair
1. Connect your device to the PC (device must be turned on and connected as "USB debugging" and "Media device)
2. Start MTK Droid Tools
3. Press Replace IMEI (fill up IMEI 1 and IMEI 2) and save
4. Reboot device
Good Luck...

NEW ROM on the way. Will be posted on the end of this week.
- oryginal multilanguage for most of languages like in a stock european ROM (not more locale)
- fixed most bugs from the previous pemergency mod
- stock launcher
- Battery life incresed to 30% more then oryginal ROM
- Battery status in a settings
- Downloading all apps from google store (no incompatibility problem)
- Quick Boot
- Better sim management
- All options for synchronisation, like in oryginal european stock ROM
and many many more...
Finished in 98%
Anyone would like to pay for this £5?
Free update for everyone who bought the previous version!!!

ok, I certainly update :good:
may inform some user from the German forum.
pretty much at the end of the page
http://www.android-hilfe.de/lenovo-ideapad-a2-forum/341347-a2107a-root-cwm-custom-rom-5.html

Huawei Honor 2 U9508, Install ROM, Install GAPPS, Root.

Huawei Honor 2 U9508
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So this is the easiest and the safest way to upgrade your phone (new ROM Android), install GAPPS and Root.
I have done this with (B544) and (B550) U9508_EmotionUI_1.5_V100R001CHNC00B550 Android 4.1.2, so you also can do this with B628 and B629 and others:
http://www.emui.com/plugin.php?id=hwdownload&mod=detail&mid=47
Here is B107 Stable (Android 4.0.4):
http://download-c.huawei.com/download/downloadCenter?downloadId=13991&siteCode=worldwide
MEGA: https://mega.nz/#!29glQa4R!dXLed1nlDMDYZxqSQPYXqf9HVatqHxzkW4dcPIMbUxE
Here is B509 Stable (Android 4.1.2 with EmotionUI 1.5) with Google Play Store and Multi language:
www.huaweidevices.de/getAttachment.php?file=U9508_V100R001C00B509.zip&force=true
MEGA: https://mega.nz/#!qkYGCJqI!vmD7eaGEMB7KBnf8_HCka08tw5dfIKKz0uwHBhUCkeg
B509 is the same as B550, but then with Google Play Store and Multi language
Here is B703 Stable (Android 4.2.2 with EmotionUI 1.6) with Google Play Store and Multi language:
www.huaweidevices.de/getAttachment.php?file=HUAWEI_Ascend_G615_Emotion_UI_SD_Card_Update.zip&force=true
MEGA: https://mega.nz/#!T1YgSToC!65sIKjnUVxz9Fkt_LvPd5ssoBOd4gqjCSe3dcvLCTtU
Here is B704 Stable (Android 4.2.2 with EmotionUI 1.6):
MEGA: https://mega.nz/#!jxAGAZjL!sgx5mPPsON1lvLEZx_QqzkBMac6PzfIXP2RsXpGRxVU
Here is B706 Beta (Android 4.2.2 with EmotionUI 1.6), it has the Bluetooth fix and Volume fix:
www.emui.com/nsp/geturl.php?path=U9508_EmotionUI_1.6_V100R001CHNC00B706.zip&rid=252
MEGA: https://mega.nz/#!P4Q2TIBI!ig5UAixOHTBE07oT2IDrKeO2t7MQyrcrXF_jpAyK1-4
Here is B709 Stable (Android 4.2.2 with EmotionUI 1.6)it has the Bluetooth fix with bluetooth auto connect without awaking the device and Volume fix:
www.emui.com/nsp/geturl.php?path=U9508_EmotionUI_1.6_V100R001CHNC00B709.zip&rid=384
MEGA: https://mega.nz/#!3hIzFBST!lj9xw5zw0C24R3KJwvTRXYYQ70xQgjQur8qOzAN-kDM
Here is B804 Stable (Android 4.2.2 with EmotionUI 2.0):
www.emui.com/nsp/geturl.php?path=U9508_EMUI_2.0_V100R001CHNC00B804.zip&rid=513
MEGA: https://mega.nz/#!TsoXGYba!bLemytfZedBa7lgaqP6EUlN37A-Va4V-xrL3jjKmMjU
First update to B709 and then do a Factory data reset and a Erase internal storage (do not forget to make a copy of the backup (HuaweiBackup) on your computer or SD Card) and
then flash it to B804.
Ow and before you install a new Firmware on your phone, you first use the App Back-up to backup all your Apps (including Google Play Store and Google Play-services)
and contacts and SMS and more, then you installed the new Firmware.
Then you used Back-up again and installed all your Apps back on your phone including Google Play Store and Google Play-services, and now Google Play works and
you do NOT have to install Chinese recovery, so if you had a old Firmware on your phone before you installed the New Firmware, you do not need Chinese
recovery, just use the App Back-up that came with the Firmware.
You don't need Chinese recovery to root your phone.
Ow and you need to press 7 times on the build number to see developers settings, in B7*** and above.
And put a copy of your backup on a Computer, and on your SD-Card if the App have not done that already.
You have to sign into gapps before the backup app will allow the option to backup google services.
Here is recovery6.0.1.9_AscendHonor2.exe:
https://mega.nz/#!fhZRzYDa!UbsyaMmDtUrbUa0tozjdQVsLM6u36q1VnUfNGO-Frys
Here is Motochopper:
http://www.mediafire.com/?f4lipgd1hh3jug2
Here is AnzhiRoot_U9508:
https://mega.nz/#!fpJSwDAa!v0UpoAmYK58_z-JCqDWY-JWV0FBFGmzBp7HXi_0frJY
Here is Genotools:
https://mega.co.nz/#!d0cknTIC!3j0dMKVNSy2TOmQBO7ToAlvkfZNdGCKeI6-tyLM6KQ0
Here is Root Genius:
https://mega.nz/#!G1Z1gQjI!PrLVCBW0yyd7N4EMw96F2v-SGvrlpj6jcWO2mVHeE7I
GAPPS
http://goo.im/gapps/gapps-jb-20121011-signed.zip Android 4.1.2.
https://mega.co.nz/#!0lUkgYqL!LtoCVV5nbbb7WOxbi4J3HAFWnGUlz2KxjslfoeVFRkw Android 4.2.2.
Here is SuperSU 0.99:
http://forum.xda-developers.com/attachment.php?attachmentid=1707684&d=1360134287
This is how you Replace Chinese Recovery with original recovery
1. Go to Settings and go to Developer options, and enable USB debugging.
2. Plug the phone in the computer, and Choose USB storage device (or Media device (MTP).
3. Restart phone and boot phone with Power & - volume
4. Open Recovery6.0.1.9_AscendHonor2.exe.
5. Now press 2 for The original recovery (1 is Chinese recovery), and press Enter.
6. If all is OK, the program will do its job and Reboot into FASTBOOT MOD, then he Flash the selected recovery and then he reboot the device 2 times.
7. Now your selected recovery have been installed.
Before starting the firmware you need to have:
If you unlocked the boatloader you cannot use official updates (Firmwares) from Huawei.
1. SD card of at least 2GB
2. Phone with a charged battery at least 50%
1. Plug the phone in the computer.
2. Unpack the archive with the firmware and throw dload folder to the root of the memory card.
3. Unplug the phone from the computer.
4. In the phone menu - Settings - Storage - Software Update - SD card Upgrade (or Settings - About phone -
System update - (Local update) Update via SD Card).
5.The phone will reboot and begin the upgrade process and you will see the following picture (be patient it can take a few minutes).
If you see a lot of Chinese letters after you boot, it means that you have installed Chinese recovery with recovery6.0.1.9_AscendHonor2.exe,
and you have to replace Chinese Recovery like you see above.
First backup all your Apps and your Massages and Browser history and Call logs and more with Back-up,
thats a App that came with your phone.
After the update the phone will reboot and start (also be patient).
Google Play Store
1. Connect phone to computer, (first install the Huawei USB Drivers) then put
GAPPS on you intern or extern Storage, now power down phone.
2. Power up your phone whilst holding Power & - volume.
3. Now your phone should be stuck in the "Huawei Ascend" logo, now connect to computer and run recovery6.0.1.9_AscendHonor2.exe
and press 1 and enter.
Then if he ask something about 1 and 2 option, and nothing happens do this:
Press CTRL+C then N. And it should start.
Make sure fastboot is OFF and USB debugging is ON
4. Now you should have custom recovery (woo), disconnect usb and remove battery.
5. put battery in and boot phone with Power & + volume.
6. So now you notice everythings chinese MYGOOOD, so do this:
Menu button 2 --> Menu button 1 [zip from internal memory]
Menu button 2 --> Menu button 4 [zip from external memory]
And select your GAPPS zip file.
Then a few seconds later GAPPS (Google Plays Store) is installed.
Then go back, Menu button 5 and then press menu button 1 (this will boot your phone).
Root your Phone
There are 4 ways you can Root this phone, first one is with Motochopper, and the second one is with AnzhiRoot_U9508, and the third is with Genotools,
and the fourth is with Chinese Recovery 6.0.1.9, do not forget to install the Huawei USB Drivers, and also HiSuite is useful to have.
It's easer with Motochopper and AnzhiRoot_U9508 and Genotools .
Motochopper
Instructions:
1. Download the file (Motochopper) to your PC.
2. Extract the entire contents of the zip file.
3. If you are using Windows, ensure you have installed the latest Huawei USB Drivers) available for your phone.
4. Connect phone to computer ensure USB Debugging mode is enabled on your device.
5. If you are using Windows, navigate to the extracted directory and execute “run.bat”. If you are using Linux or OS X, navigate to the extracted
directory in a terminal and execute “./run.sh”.
AnzhiRoot_U9508
1. connect dev to pc (usb debuging on)
2. run program
3. press one button "root"
Don't forget to restart your phone.
warnings: Dr.Web determines such program as virus (Tool.Rooter.18.origin)
Genotools
1. Connect your phone to your computer via a USB cable, select HiSuite.
2. Run GenoTool.
3. Go to tab 4.
4. Click "Root 1"
Root Genius
Works good with B804
1. Enable USB Debugging on your Android Sartphone.
2. Open Root Genius on your Windows Computer.
3. Once Roor Genius has started, connect your smartphone to the computer with USB Cable.
4. Once your smartphone is connected succsessfully to the Computer, Root genius will automatically detect your Smart phone.
5. Now click on the Root Now button to begin the rooting process.
6. Now Root Genius will Automatically Root your Smartphone and install KingUser App.
7. Now your smartphone is Rooted.
Chinese Recovery
Only works if you installed recovery6.0.1.9_AscendHonor2.exe, like you see above.
Download and copy CWM-SuperSU-v0.99.zip (or any similar SuperSU) to your SD Card.
Shutdown your phone, restart by pressing Power + Volume Up buttons until you enter CWM screen.
Menu button 2 --> Menu button 1 [zip from internal memory]
Menu button 2 --> Menu button 4 [zip from external memory]
And select CWM-SuperSU-v0.99.zip file.
Then a few seconds later CWM-SuperSU-v0.99.zip (SuperSU 0.99) is installed.
Then go back, Menu button 5 and then press menu button 1 (this will reboot your phone).
Pleas note that, you only get your phone rooted after this.
Removing Chinese apps
Only works if you have Rooted your Phone.
1. Download Root App Delete and start it.
2. Now select System Apps and then select ProMode
3. Now select the App and select Uninstall.
4. thats all now the App is uninstalled and is gone from your phone.
If Root App Delete don't work use Final Cleaner & Task Killer
I have done it and it's very easy, if you already had MoreLocale 2 on your phone and selected your language then he will go to your language
in a view clicks, and if you had English in settings then you also still will have that, also with ADW.Launcher or (i hear better) with
Apex Launcher you have your App Drawer and more back.
Why is my notification bar (panel) gone?
To have a working notification bar, there are a few conditions to be achieved by the rom:
-the file cust/channel/*countryname*/xml/hw_defaults.xml must contain two lines:
<integer toolBoxSwitch="1"/>
<string toolBoxDisplayWidgetNameArray="com.huawei.android. toolbox,com.huawei.android.toolbox.ToolBoxProvider "/>
-the file system/build.prop must contain the line: ro.config.hw_toolbox=true
-the updater-script must contain the correct symlink, like: symlink("/cust/channel/cn", "/data/cust");
When using an original update from a country different than the phone's country, there is no symlink made, so all the files in the cust partition are not
seen by the phone, which leads to no notification bar and other issues!
In a custom rom the symlink is forced in the updater-script, so if everything else is ok, everything works!
Also, if someone flash a rom of Batty86 for example, and clean data after flashing, the symlink leads to a deletion of the cust partition, so again we have
no notification bar and so on.
I hope it's a bit more clear now.
Change languages without morelocale2
To get more languages without morelocale2, you can look for /сust/channel/cn/xml/hw_defaults.xml on your phone (use Root Browser to select file).
Now go about 60% down till you are at Phone related, and then you will see:
<string white_languages="zh_CH,en_US"/>
And put between en_US and "/> your language you want, en_GB is British English language, fr_FR is French language, de_DE is German language, and so on and so on.
So if you want your Phone to be French you have to do this <string white_languages="zh_CH,en_US,fr_FR"/>
And also do that with:

Wipe data/factory reset the phone once again, and you should have more languages at your disposal.
SO now you can choose your language, and never have to use morelocale2 anymore (until you reflash your Firmware of course).
You need root access for this.
Good luck everybody.
With thanks to maikzen, for how to flash GAPPS and octop and soudy1994 and Pimorez and vkukfor and androidxda how to Root and Batty86 for why the notification bar (panel) is gone.

And the caller ID its works on Android 4.1.2 ?
AmigaWolf said:
So this is the easiest way to upgrade your phone (new ROM Android), install GAPPS and Root, it's the safest.
I have don this with (B544) U9508_EmotionUI_1.5_V100R001CHNC00B544 Android 4.1.2, so you also can do this with B605 and B610 and B615 others:
http://cn.ui.vmall.com/emotiondownload.php?type=%E8%8D%A3%E8%80%80%E5%9B%9B%E6%A0%B8
Here are GAPPS:
http://goo.im/gapps/gapps-jb-20121011-signed.zip
Here is SuperSU 0.99:
http://forum.xda-developers.com/attachment.php?attachmentid=1707684&d=1360134287
Before starting the firmware you need to have:
1. SD card of at least 2GB
2. Phone with a charged battery at least 50%
1. Unpack the archive with the firmware and throw dload folder to the root of the memory card.
2. Turning off the phone from the computer.
3. In the phone menu - Settings - Storage - Software Update - SD card Upgrade (or Settings - About phone - System update - Update via SD Card).
4.The phone will reboot and begin the upgrade process and you will see the following picture.
After the update the phone will reboot and start.
Google Play Store
1. Connect phone to computer, (first install the Drivers) then put GAPPS on you intern or extern Storage, now power down phone.
2. Power up your phone whilst holding Power & - volume.
3. Now your phone should be stuck in the "Huawei Ascend" logo, now connect to computer and run recovery6.0.1.9_AscendHonor2.exe and press 1 and enter.
4. Now you should have custom recovery (woo), disconnect usb and remove battery.
5. put battery in and boot phone with Power & + volume.
5. So now you notice everythings chinese MYGOOOD, so do this:
Menu button 2 --> Menu button 1 [zip from internal memory]
Menu button 2 --> Menu button 4 [zip from external memory]
And select your GAPPS zip file.
Then a few seconds later GAPPS (Google Plays Store) is installed.
Then go back, Menu button 5 and then press menu button 1 (this will boot your phone).
Root your Phone
Download and copy CWM-SuperSU-v0.99.zip (or any similar SuperSU) to your SD Card.
Shutdown your phone, restart by pressing Power + Volume Up buttons until you enter CWM screen.
Menu button 2 --> Menu button 1 [zip from internal memory]
Menu button 2 --> Menu button 4 [zip from external memory]
And select CWM-SuperSU-v0.99.zip file.
Then a few seconds later CWM-SuperSU-v0.99.zip (SuperSU 0.99) is installed.
Then go back, Menu button 5 and then press menu button 1 (this will boot your phone).
Pleas note that, you only get your phone rooted after this.
I have don it and it's very easy, if you already had MoreLocale 2 on your phone and selected your language then he will go to your language in a view clicks, and
if you had English in settings then you also still will have that, also with ASW Launcher you have your App Drawer and more back.
Good luck everybody.
With thanks to maikzen, for how to flash GAPPS and octop for how to Root
Click to expand...
Click to collapse
And the caller ID its works on Android 4.1.2 ?
Here in my Cellphone didn't work, the cellphone was in my google account contatcs and show "Unknown Number" when someone calls me ...
I dont know what it is !

AmigaWolf said:
So this is the easiest way to upgrade your phone (new ROM Android), install GAPPS and Root, it's the safest.
I have don this with (B544) U9508_EmotionUI_1.5_V100R001CHNC00B544 Android 4.1.2, so you also can do this with B605 and B610 and B615 others:
http://cn.ui.vmall.com/emotiondownload.php?type=%E8%8D%A3%E8%80%80%E5%9B%9B%E6%A0%B8
Here are GAPPS:
http://goo.im/gapps/gapps-jb-20121011-signed.zip
Here is SuperSU 0.99:
http://forum.xda-developers.com/attachment.php?attachmentid=1707684&d=1360134287
Before starting the firmware you need to have:
1. SD card of at least 2GB
2. Phone with a charged battery at least 50%
1. Unpack the archive with the firmware and throw dload folder to the root of the memory card.
2. Turning off the phone from the computer.
3. In the phone menu - Settings - Storage - Software Update - SD card Upgrade (or Settings - About phone - System update - Update via SD Card).
4.The phone will reboot and begin the upgrade process and you will see the following picture.
After the update the phone will reboot and start.
Google Play Store
1. Connect phone to computer, (first install the Drivers) then put GAPPS on you intern or extern Storage, now power down phone.
2. Power up your phone whilst holding Power & - volume.
3. Now your phone should be stuck in the "Huawei Ascend" logo, now connect to computer and run recovery6.0.1.9_AscendHonor2.exe and press 1 and enter.
4. Now you should have custom recovery (woo), disconnect usb and remove battery.
5. put battery in and boot phone with Power & + volume.
5. So now you notice everythings chinese MYGOOOD, so do this:
Menu button 2 --> Menu button 1 [zip from internal memory]
Menu button 2 --> Menu button 4 [zip from external memory]
And select your GAPPS zip file.
Then a few seconds later GAPPS (Google Plays Store) is installed.
Then go back, Menu button 5 and then press menu button 1 (this will boot your phone).
Root your Phone
Download and copy CWM-SuperSU-v0.99.zip (or any similar SuperSU) to your SD Card.
Shutdown your phone, restart by pressing Power + Volume Up buttons until you enter CWM screen.
Menu button 2 --> Menu button 1 [zip from internal memory]
Menu button 2 --> Menu button 4 [zip from external memory]
And select CWM-SuperSU-v0.99.zip file.
Then a few seconds later CWM-SuperSU-v0.99.zip (SuperSU 0.99) is installed.
Then go back, Menu button 5 and then press menu button 1 (this will boot your phone).
Pleas note that, you only get your phone rooted after this.
I have don it and it's very easy, if you already had MoreLocale 2 on your phone and selected your language then he will go to your language in a view clicks, and
if you had English in settings then you also still will have that, also with ASW Launcher you have your App Drawer and more back.
Good luck everybody.
With thanks to maikzen, for how to flash GAPPS and octop for how to Root
Click to expand...
Click to collapse
How can i get back my original bootloader ? in english ?
Because now i cant install original roms using dload folder and pressing + and - volume + power on start =(
how can i install my original rom again ?
Thanks

marcio carvalho moura said:
How can i get back my original bootloader ? in english ?
Because now i cant install original roms using dload folder and pressing + and - volume + power on start =(
how can i install my original rom again ?
Thanks
Click to expand...
Click to collapse
Sorry been sick almost the whole week, and i am still sick, but what do you mean How can i get back my original bootloader ? in english ?
What have happened, you have flash (B544) U9508_EmotionUI_1.5_V100R001CHNC00B544 like i have sad:
1. SD card of at least 2GB
2. Phone with a charged battery at least 50%
1. Unpack the archive with the firmware and throw dload folder to the root of the memory card.
2. Turning off the phone from the computer.
3. In the phone menu - Settings - Storage - Software Update - SD card Upgrade (or Settings - About phone - System update - Update via SD Card).
4.The phone will reboot and begin the upgrade process and you will see the following picture.
After the update the phone will reboot and start.
I do not know what is wronge with your caller ID because i still have caller ID after flashing to B544, and i don't use google account contacts because i like my privacy.

thank for share
:good::good::good::good::good::good::good::good:

Need help
I keep getting the error: Couldn't sign in. Can't establish a reliable data connection to the server
help please

Eustis said:
I keep getting the error: Couldn't sign in. Can't establish a reliable data connection to the server
help please
Click to expand...
Click to collapse
What sign in, which server with program??????
You don't give me any useful info, and i am no programmer i only know a view things, like how to update
your OS (Android) and GAPPS and Rooting.
tuananh5292 said:
:good::good::good::good::good::good::good::good:
Click to expand...
Click to collapse
Thank you for your Thanks, and good to hear that i could help you.

AmigaWolf said:
What sign in, which server with program??????
You don't give me any useful info, and i am no programmer i only know a view things, like how to update
your OS (Android) and GAPPS and Rooting.
Thank you for your Thanks, and good to hear that i could help you.
Click to expand...
Click to collapse
im sorry. I keep getting that error in google play store/every sign in needed google, for example youtube. I have tried many things to fix it, but none seem to work
i have emotion B537, rooted, and with gapps

Eustis said:
im sorry. I keep getting that error in google play store/every sign in needed google, for example youtube. I have tried many things to fix it, but none seem to work
i have emotion B537, rooted, and with gapps
Click to expand...
Click to collapse
Then it sounds more like you are typing your Password or User name wrong, had the same problem also once.
UPDATE: Have you ROOTED your phone, because GAPPS won't work without a rooted phone.

AmigaWolf said:
Then it sounds more like you are typing your Password or User name wrong, had the same problem also once.
UPDATE: Have you ROOTED your phone, because GAPPS won't work without a rooted phone.
Click to expand...
Click to collapse
yes its rooted.. and im sure its the right password... i have tried many accounts, even tried making a new one. still doesnt work
I have tried many things to fix it like these methods:
1- pull sim card
2- log into youtube, but it only comes to the same google login problem :S
3- factory reset
4- changing time
its really frustrating, i cant login to any google account, like youtube, playstore or gmail

Eustis said:
yes its rooted.. and im sure its the right password... i have tried many accounts, even tried making a new one. still doesnt work
I have tried many things to fix it like these methods:
1- pull sim card
2- log into youtube, but it only comes to the same google login problem :S
3- factory reset
4- changing time
its really frustrating, i cant login to any google account, like youtube, playstore or gmail
Click to expand...
Click to collapse
Then try to reinstall GAPPS, or try a different one, like a new one.
Or just put the newest Stable Emui on your phone like i have done B544, works perfect on my phone, so must also work on yours.

AmigaWolf said:
Then try to reinstall GAPPS, or try a different one, like a new one.
Or just put the newest Stable Emui on your phone like i have done B544, works perfect on my phone, so must also work on yours.
Click to expand...
Click to collapse
Could you show us some screenshots of the rom and how many Chinese things are on it.. thanks

PCTechRoss said:
Could you show us some screenshots of the rom and how many Chinese things are on it.. thanks
Click to expand...
Click to collapse
There are almost no Chinese things on it anymore, you can delete them almost all, and also disable them if you want.
Ok i will make some screen shots, and then put them here.
This is how MY B544 EmotionUI_1.5_V100R001CHNC00B544 Android 4.1.2 looks like.
So if you first install B544 it looks different, you can change everything you like, even how icons looks and so on.

Chopinko said:
There is some little problem with installing the B605.
After i copy the dload folder to the sd card, turn off, then (Vol + Vol - and Power) or (Settings - Storage - Software Update - SD card Upgrade)
it boots into Geno mod screen, with a lot of Chinese ****.
something like 7-8 options.
All this, instead of installing the new B605...
BTW, now i'm on MIUI.
How to solve this? If i do get it right, the recovery of mine is not the original, coz once i've installed it via recovery6.0.1.9_AscendHonor2.
But now, i dont know how to rollback to original recovery....
Click to expand...
Click to collapse
You have to ask maikzen about that, i just let people know how to flash there phone with B544 and B605 and B610 and B615, i don't
know how to rollback to original recovery.

I already have recovery installed. How do i remove it so i can upgrade fimeware to b544??
EDIT: i used the custom recovery installer and pressed 2 (install original recovery) And now when i try to upgrade it says FAILED or something like that in big letters. I also tried factory reseting from recovery and it says FAIL again. Please help. I also have gapps and superuser installed.. how do i remove it or how do i do a COMPLETE reset, delet gapps and superuser? I earlier tried resetting from settings, and it worked but gapps and superuser was still there

Eustis said:
I already have recovery installed. How do i remove it so i can upgrade fimeware to b544??
EDIT: i used the custom recovery installer and pressed 2 (install original recovery) And now when i try to upgrade it says FAILED or something like that in big letters. I also tried factory reseting from recovery and it says FAIL again. Please help. I also have gapps and superuser installed.. how do i remove it or how do i do a COMPLETE reset, delet gapps and superuser? I earlier tried resetting from settings, and it worked but gapps and superuser was still there
Click to expand...
Click to collapse
You have to ask maikzen about that, i just let people know how to flash there phone with B544.
So sorry i don't know, i had no problems installing B544, i also installed recovery6.0.1.9_AscendHonor2.exe and had no problem installing B544.
Maybe THIS will help you, it's don on a Huawei Ascend C881 but maybe it will work on this phone.

flyme
Hello is it possible here to request flyme os port for hh2 ??? or where should i ask ???))

lexeyd said:
Hello is it possible here to request flyme os port for hh2 ??? or where should i ask ???))
Click to expand...
Click to collapse
Maybe you can ask that here: http://forum.xda-developers.com/showthread.php?t=2039998&page=144

How to go back to stock ROM ?? (HUAWEI_Honor2_firmware(U9508,Android_4.0,V100R001C00B107,Normal,05011HWL).zip)
Settings->Storage->Software Upgrade->SD card Upgrade->Confirm->Upgrade option NOT there...
Can't find anything usable..

BLU Quattro 4.5 rom list and how to instructions

Found this online. *****this is not my work****** All credit goes to the author quattrodevelopment.blogspot.com
Here is a step by step with roms included for the 4.5 quattro Not the HD or 5.7 HD maybe soon.
Disclaimer: These ROMs/Recoveries are only intended for the BLU Quattro 4.5, or the K-Touch v9(which is the chinese version) These WILL NOT work on the 4.5HD or 5.7HD devices(I will release ROMs/Recoveries specifically for your device at a later time)
Drivers: https://copy.com/BUMmsS9rhLJe
English Recovery: https://copy.com/XZxTDht2lQiz
Gapps(4.2) https://copy.com/utkbZgwRpsVB
Gapps(4.1) https://copy.com/pSd8SsqU9pdI
ROMs With Less Bugs: MIUI v5 (4.1) https://copy.com/sbmcN6PHwFfi CM/AOKP Hybrid? JB (4.1) https://copy.com/VeLz1VLbkNNI Shendu ROM 4.1(Modified/Tweaked by me) https://copy.com/NwiFnlO8JAek
ROMs With More Bugs: Cyanogenmod 10.1 (4.2) https://copy.com/8kt2EAU2ll8y
1- Download the drivers from link posted above, and extract it to the folder of your desire. Now turn the phone off, and hold Vol+ (volume up button) and Power button at the same time until you see a green screen, then release both buttons immediately. You should now be in APX mode(nvflash) it will be a black screen
2- Connect phone to computer via usb cable. Now you should get a pop-up window about installing drivers, you're going to want to choose to browse computer for driver software manually. Then choose let me pick from a list of device drivers on my computer, and click have disk. Now you're going to browse to the location where you extracted the drivers to, and click on it(Ignore warning if it pops up, and choose install)
3- Assuming everything went as planned, now download the recovery and extract it to the location you desire(must be in a directory that you can issue adb commands from) inside of that folder, locate a file named recovery.bat. Double click on that file and a command prompt with a bunch of chinese pops up. Give it a second and press enter, it will go through the process and flash a recovery onto your phone
4- After everything is done, hold down the power button for about ten seconds(until the device powers off) Power the device back on normally, and download the ROM/ROMs if you haven't already and place them on the internal or external sd card(your choice) With device connected to pc, open command prompt and type in "adb reboot recovery" (without quotes) and the device will boot into recovery mode
5- Now that we have an English recovery, the translations below aren't really needed. However, I'm going to leave them up for a few days, just until everybody can transition to the English recovery. They will be deleted after that!
Recovery Main Menu: -Reboot -Install from SD card -Wipe Data/Factory Reset -Wipe Cache -Backup&Restore -Mount/Format -Advanced
Install From SD Card Menu: -Install zip from external SD -Apply update.zip -Unknown* -Install zip from internal SD
Backup&Restore Menu: -Backup -Restore -The rest are unknown*
Advanced Menu: -Reboot Recovery -Wipe Dalvik Cache -The rest are unknown*
To install ROM- In recovery mode, Factory Reset/Wipe Cache/Wipe Dalvik Cache. Then choose install zip from sd card(then choose internal or external and locate the ROM you want to install) After that you need to do the same thing to install the gapps package(you need the gapps package for google apps to function) once all is done, reboot and wait(it takes a while to boot the first time after flashing new ROMs, it has to rebuild the Dalvik cache)
NOTE: In case you aren't familiar with flashing ROMs, once you click on something( "backup" for example) a menu pops up pretty much asing you if you're sure you want to do that. It will have a bunch of lines of the same thing(which is no) and then one of the lines will have a bunch of writing beside it(which means yes). Also BEFORE you flash any ROMs, make sure you factory reset/wipe cache/and wipe dalvik cache, then you can flash the ROM and gapps package
*These will be updated regularly, as I discover what they are **More ROMs to come!

Internal Memory
The "BLU Quattro 4.5" has 4GB internal memory partitioned into 0.98GB for ROM and apps and an internal usb-memory of 1.63GB.
Is it possible to merge or resize the partitions?
I have 16GB external SD so the 1.63GB internal reserved usb-memory is useless and I still having trouble out of space in primary partition.
Thanks and sorry my english =/

TechSoft said:
Found this online. *****this is not my work****** All credit goes to the author quattrodevelopment.blogspot.com
Here is a step by step with roms included for the 4.5 quattro Not the HD or 5.7 HD maybe soon.
Disclaimer: These ROMs/Recoveries are only intended for the BLU Quattro 4.5, or the K-Touch v9(which is the chinese version) These WILL NOT work on the 4.5HD or 5.7HD devices(I will release ROMs/Recoveries specifically for your device at a later time)
Drivers: https://copy.com/BUMmsS9rhLJe
English Recovery: https://copy.com/XZxTDht2lQiz
Gapps(4.2) https://copy.com/utkbZgwRpsVB
Gapps(4.1) https://copy.com/pSd8SsqU9pdI
ROMs With Less Bugs: MIUI v5 (4.1) https://copy.com/sbmcN6PHwFfi CM/AOKP Hybrid? JB (4.1) https://copy.com/VeLz1VLbkNNI Shendu ROM 4.1(Modified/Tweaked by me) https://copy.com/NwiFnlO8JAek
ROMs With More Bugs: Cyanogenmod 10.1 (4.2) https://copy.com/8kt2EAU2ll8y
1- Download the drivers from link posted above, and extract it to the folder of your desire. Now turn the phone off, and hold Vol+ (volume up button) and Power button at the same time until you see a green screen, then release both buttons immediately. You should now be in APX mode(nvflash) it will be a black screen
2- Connect phone to computer via usb cable. Now you should get a pop-up window about installing drivers, you're going to want to choose to browse computer for driver software manually. Then choose let me pick from a list of device drivers on my computer, and click have disk. Now you're going to browse to the location where you extracted the drivers to, and click on it(Ignore warning if it pops up, and choose install)
3- Assuming everything went as planned, now download the recovery and extract it to the location you desire(must be in a directory that you can issue adb commands from) inside of that folder, locate a file named recovery.bat. Double click on that file and a command prompt with a bunch of chinese pops up. Give it a second and press enter, it will go through the process and flash a recovery onto your phone
4- After everything is done, hold down the power button for about ten seconds(until the device powers off) Power the device back on normally, and download the ROM/ROMs if you haven't already and place them on the internal or external sd card(your choice) With device connected to pc, open command prompt and type in "adb reboot recovery" (without quotes) and the device will boot into recovery mode
5- Now that we have an English recovery, the translations below aren't really needed. However, I'm going to leave them up for a few days, just until everybody can transition to the English recovery. They will be deleted after that!
Recovery Main Menu: -Reboot -Install from SD card -Wipe Data/Factory Reset -Wipe Cache -Backup&Restore -Mount/Format -Advanced
Install From SD Card Menu: -Install zip from external SD -Apply update.zip -Unknown* -Install zip from internal SD
Backup&Restore Menu: -Backup -Restore -The rest are unknown*
Advanced Menu: -Reboot Recovery -Wipe Dalvik Cache -The rest are unknown*
To install ROM- In recovery mode, Factory Reset/Wipe Cache/Wipe Dalvik Cache. Then choose install zip from sd card(then choose internal or external and locate the ROM you want to install) After that you need to do the same thing to install the gapps package(you need the gapps package for google apps to function) once all is done, reboot and wait(it takes a while to boot the first time after flashing new ROMs, it has to rebuild the Dalvik cache)
NOTE: In case you aren't familiar with flashing ROMs, once you click on something( "backup" for example) a menu pops up pretty much asing you if you're sure you want to do that. It will have a bunch of lines of the same thing(which is no) and then one of the lines will have a bunch of writing beside it(which means yes). Also BEFORE you flash any ROMs, make sure you factory reset/wipe cache/and wipe dalvik cache, then you can flash the ROM and gapps package
*These will be updated regularly, as I discover what they are **More ROMs to come!
Click to expand...
Click to collapse
Please rename this For Others Such as [GUIDE]BLU Quattro HowtoRoot/Rom list. Thanks for the awesome Guide!

alanfrank said:
The "BLU Quattro 4.5" has 4GB internal memory partitioned into 0.98GB for ROM and apps and an internal usb-memory of 1.63GB.
Is it possible to merge or resize the partitions?
I have 16GB external SD so the 1.63GB internal reserved usb-memory is useless and I still having trouble out of space in primary partition.
Thanks and sorry my english =/
Click to expand...
Click to collapse
I've found this: http://forum.xda-developers.com/showthread.php?t=1171531
Any idea if this can be used with another phone them the LG one he have used in the guide?
I cant post in the thread because Im new user here =/

problem
I have done everithing you said, and my cell freezes on boot forever, now what????

BLU Quattro 4.5 HD & 5.7
Need to know how to restore both devices to stock. Any aplication ODIN like to restore it back to stock from the download mode?

Please help me root, i try binary method but i just get boot loop.

Recovery + Root My experience
Hello... I got my BLU Quattro 4.5 (D440) a while back, didn't fuzz with it much right off. The Stock ROM was sluggish at best thought there was even an issue with the Digitizer/screen. But this thread was extremely helpful. I am now running Shendu ROM 4.1.2 one of the suggested ROM's above. I tried the other 2 first and they were mostly in Chineese and I had an especially hard time getting them switched over to English. Either way onward to the point. I have put together a few helpful tips-tricks for my experience with this phone and its phoenix transition to an awesome handset. Thats right now this is my daily driver and I love it! See below hope its helpful.
BLU Quattro 4.5 (440D) GSM Recovery+Root
These steps for this phone only!! Not responsible for any issues.
1. download ROM's, Recovery, & Driver from XDA (this thread)
http://forum.xda-developers.com/showthread.php?t=2327417
2. Enable USB Debugging! Go into Apps-Settings-DevOptions - Check box for USB Debug
3. Have original USB cord if handy! I tried with a Samsung OEM cable but no luck getting drivers to stick. Use original is best. (If you have one.)
Plug in USB Cord to PC then Phone and see if windows detects drivers. let it. It wont get the ones u need later, but what it does find is for USB storage. (you can move over your ROM's/Gapps to storage, downloads folder is a good spot).
4. Go to... http://junefabrics.com/android/downloadold.php to get pdanet software. Install it and it will give i the right drivers for ADB support. I used 4.01 to match the android version currently on my phone.
5. Extract the Driver provided from XDA. Put it in a folder with the ADB commands. Or you can get it all here... http://downloadandroidrom.com/file/GalaxyNexus/rooting/GalaxyNexusRootNew.zipn <-- I know this isn't for BLU but, if you extract this to a folder, and also add the drivers extracted to it as well this works! I've done it.
6. Extract the English Recovery to the same folder.
7. Turn off your phone. Hold down Vol up and Power button for about 5-9 seconds. Once you see a green screen let go of both. Screen may flicker then go black but the icons at the bottom will stay lit. You are now in APX mode (nvflash) mode. (as stated above in original post)
8. Check your Win 7 PC device manager. For a Phone device with ADB. If you you may need to update driver with the one that came from XDA, but the PDANet software should make it work.
8. Go to the folder and find Recovery.bat file (may have Chinese in file name. Double click and a command prompt window will pop up with a bunch of unknown characters, wait 5 sec then hit enter. The batch file should take of pushing the necessary recovery through ADB to the phone. It will error if it can't.
9. If completes OK. Push power for 7-9 seconds to power off the phone. Hit power like normal to turn it back on. It will boot up like normal (or it should).
10. USB is still connected this whole time and you can open a command prompt window. Navigate to the folder you placed the Recovery into. Something like user/username/desktop/BLU/recovery..etc)
Type ADB devices....it should show you that is is connected to your device. Then type " adb reboot recovery " and the device should reboot, give it some time.
11. Once in recovery. Best to do a backup of the original ROM & system. that way you can get back into recovery if anything goes wrong and wipe out the problem by restoring and starting again.
After you backup === you can get into recovery without the command being typed in or even being connected to your PC.... By holding Vol up + Power till you see the green screen then let go of power but keep holding Vol up till you see the BLU Products boot screen then let go ===
Clockworkmod Recovery should be on your screen.
you can reboot phone now and get back to original with no changes. Or you can venture into the world of loading ROM's (There in your downloads folder if you saved them in Step 3)
ROM 101
BACKUP-BACKUP-BACKUP 1st thing once in Recovery ...can't stress enough how much of trouble you can keep yourself out of by keeping an original backup.
As I stated before the Shendu ROM + Gapps is running smooth and all features I've been trying are working flawlessly!! Thanks to original post for getting me going. Just thought I'd add my 2 Cents.

Ok, here are the BEST 2 ROMS for this Phone:
Android 4.0.4(close to vanilla) : MEGA
Cyanogenmod 10.2 (Android 4.3.1) : (some audio and video issues, in BETA version ) MEGA
Need to merge internal partitions ? (merge memories) this one really "resize" the partitions (first one 1,7GB, another one new size is 2Mb) the flash.cfg file you need to flash:
This phone dont have notificaion led, fixed with this app: MEGA (flash the botton menu buttons)

Altomugriento said:
Ok, here are the BEST 2 ROMS for this Phone:
Android 4.0.4(close to vanilla) : MEGA
Cyanogenmod 10.2 (Android 4.3.1) : (some audio and video issues, in BETA version ) MEGA
Need to merge internal partitions ? (merge memories) this one really "resize" the partitions (first one 1,7GB, another one new size is 2Mb) the flash.cfg file you need to flash:
This phone dont have notificaion led, fixed with this app: MEGA (flash the botton menu buttons)
Click to expand...
Click to collapse
Can you explain the merge memories procedure? it will be reaaaaally needed!!
tryed from a spanish forum with no luck
thanks

dinizbruno said:
Can you explain the merge memories procedure? it will be reaaaaally needed!!
tryed from a spanish forum with no luck
thanks
Click to expand...
Click to collapse
Do you try the procedure posted in 3dgames . com . ar? ( its my work translated from the 592zn page, all the credits for the chinesse people)

Anyone tried the K-touch V9 kit kat in the BLU??
www
needrom
com/
download/
k-touch-v9-miui-v5-kk

Yes, those roms (v5) are very slow. Just use the 4.0.4 stock.
I want to try the JB stock, but i can´t find the official one anywhere.
Blu quattro 4.5 official rom to download, after you delete the bloatware and put a nice and clean theme you´ll get a nice speed.

orig D440 (quattro 4.5) rom
You can find the rom on google plus under BLU Products Development search for the model!
Hope that helps. I took your advice tonight and I am back running old school. Works ok husfar

I need phone.apk of this rom for Blu Quattro
Trozzul said:
Please rename this For Others Such as [GUIDE]BLU Quattro HowtoRoot/Rom list. Thanks for the awesome Guide!
Click to expand...
Click to collapse
I need phone.apk for blu quatro
please send me the file
[email protected]

[Q] ZTE V5 Red Bull V9180 WCDMA 2GB RAM, 8GB ROM- root, cwm

So by today (22.09.2014) is your phone oficialy renamed from "ZTE Red Bull V5" to "ZTE V5"
POSTING A PROBLEM
If you have some sort of problem with your device please please get us this info, so we could help you:
1-what rom/firmware are you using
2-what recovery
3-if you have rooted your device
4-what caused the problem
5-step by step description what you did before the problem shows up.
Hi i just made this thread to make a base for everyone who bought this (form me) superb phone.
So far we got root, custom recovery, and many chinese roms (based on Nubia UI, Color OS, LEWA OS, FROG OS...).
There are Mokee AOSP 4.4.4. rom in develpoment and CM11 in development, CM12 also.
2015.02.13 - Latest firmware is 1.17 (andorid 4.4.2, nubia UI2.5.1)!!!
Changelog(google translation from chineese):
-optimize the signal problem
-solving open U disk mode or restart the phone, ringtones revert to the default issue
into the video again, this video from one schedule to start playing the video
-update time management software, to solve the problem of the shutdown alarm clock does not ring
-media library interface, Pictures Pictures folder appear as a blank
-to use the gallery under OTG open unsupported file error
-switching to the media library interface, multiple exposure, suggesting that language View screenshot untranslated
-save the video recording status suspended again after recording, the Pause button to display the error
-optimization manually Focus
-video recording in the recording pause again, long display of detailed information is incorrect
-horizontal screen - portrait - horizontal screen operation, not full screen
-video player interface to open the USB mass storage press the return key error
here is link to my google drive. It contains stock roms from 0.50 to 1.12, GAPPS ect. Also contains tools to root and flash custom recovery.
MY GOOGLE DRIVE ZTE V9180 FOLDER
In my Google Drive there is also two custom recovery CWM and TWRP (thanx a lot to FAZERGOO from 4PDA.ru, here on XDA it is fazerg, so please thank him for his work)..the script in my root+recovery folder is updated, so you have option to flash CWM (6.0.5.1) or TWRP (2.8.0.0.)
here is list of commands you can dial in dialer and get some hidden menu and settings:
*#06# - displays IMEI
##36 - update server settings for OTA
*#*#4636#*#* - display phone information, battery information, battery history, usage statistics, WiFi information
*#406# - touch screen calibration
--proximity sensor calibration--
*#777# - no cover of proximity sensor
*#776# - cover proximity sensor with hand 2-5 cm above..so the bar is in the green
*# 405# - MHL test
to go to recovery you have to poweroff the phone and hold "vol+" and "power" for 2 sec
to go to safe mode....???
best resources for ROMS (chinese sites):
bbs.anzhi.com
www.tdbeta.cn
www.ztehn.com
And of course our friends from Russia thread:
www.4pda.ru
proDOOMmans mega drive where you can find all Mokee, CM11, PAC roms:
HERE! and dont forget to hit THANKS button for everyone who develop and help us to use this device!!!!
TIPS & TRICKS
-HOW TO CHANGE LCD DENSITY and switch to phablet UI!!! Beware, the camera app is little bit smaller then the screen, becaouse of the density, but still works well.
-HOW TO ADD ONE HAND FEATURE
-did you know that when holding home button on locked screen lights a flashlight?
-when you double tap home button on locked screen the time changes to media player controls?
-when you tap several times on any home screen your glas will broke?
-when you zoom out with two fingers on any home screen you will get into screen manager?
-in alarm clock app there is setting "power of alarm", when turned on, you can turn off your phone at night and the phone turns on by itself in the alarmclock time and wakes you up?

complete guide by navin_n
People always asking again and again on flashing ROMs, Recovery, GApps, Root etc. So, I have made detailed step by step guide for this. Hope now it will be clear to everyone for these processes:
BEFORE YOU DO ANYTHING FROM FOLLOWING, PLEASE MAKE ANANDROID BACKUP, BEST WITH TWRP!!!BECAUSE TWRP CAN MAKE BACKUP INCLUDING PRESIST AND MODEMST PARTITIONS!!![/CENTER]
GUIDE TO FLASH STOCK ROM:
NOTE:
1. Be sure to backup all important data (contacts, messages, call records, etc.) before proceeding
2. Ensure that Phone Battery is at least 40%.
3. Downloaded required STOCK ROM.
4. Phone with Stock Recovery.
STEPS:
1. Copy the downloaded zipped STOCK ROM to the root directory of External SD card or Internal SD card.
2. Power-off the phone.
3. Put the phone in the Recovery Mode and for this you need to press Vol+ and Power button at the same time for few secs and then release the Power Button.
4. In the Stock Recovery, perform wipe data/factory reset and wipe cache partition (In the menu, use +/- volume keys to scroll up/down & power button for confirmation).
5. Depending on which SD card you have copied the zipped STOCK ROM, choose "Apply update from /sdcard" or "Apply update from external /sdcard" accordingly.
6. Select the zipped STOCK ROM to flash.
7. Wait until you get the confirmation of successful flashing.
8. Reboot the phone by selecting "reboot system now".
9. DONE. (Initial boot may take some time so have patience.)
GUIDE TO INSTALL CUSTOM RECOVERY + CUSTOM ROM:
AS FOR CERTAIN REPORTS IT IS STRONGLY RECOMMENDED TO FLASH CWM RECOVERY IF YOU HAVE 1/8 VERSION
REQUIREMENTS:
1. Be sure to backup all important data (contacts, messages, call records, etc.) before proceeding.
2. Working Windows PC with ADB Drivers installed - without proper installation of drivers the process will not be successful.
3. Ensure that Phone Battery is at least 40%.
STEPS: (If you need only Custom Recovery, then follow the steps from 2 to 7, other steps you can skip)
1. Download the required zipped Custom ROM and copy it to the root directory of External SD card or Internal SD card.
2. Download the Recovery Tool zip file. (Link to download the Tool) . Make sure to download whole files. After that copy the zipped file to the root directory of C:\ or any place you prefer and then unzip the downloaded file.
3. Enable USB debuging mode. ("Menu Button" >> System settings(Settings) >> About phone(On the phone) >> Tap 6 times on Build number>>"Back button">> More >> Developer options >> Enable USB Debugging)
4. Connect the phone to the PC.
5. Go to the folder where you have unzipped the Recovery Tool file, and then execute the batch file "run.bat".
6. In PC, new window will open. Input your choice of Custom Recovery accordingly.
7. Follow the steps on-screen until all completes.
8. After completion, in the Fastboot menu, select "Boot recovery".
9. If the Custom Recovery was flashed succesfully, you will get CWM or TWRP recovery menu.
10. Perform wipe data/factory reset and wipe cache partition.
11. To flash the firmware: Select "Install ZIP" >> "choose zip from sdcard0 or sdcard1" depending on which SD card you have copied the ROM, external or internal >> Select Custom ROM >> Click Yes to flash selected ROM.
12. Wait until you get the confirmation of successful flashing.
13. Reboot the phone by selecting "reboot system now".
14. DONE. (Initial boot may take some time so have patience.)
GUIDE TO INSTALL GAPPs & ROOT:
REQUIREMENTS:
1. Backup all important data (contacts, messages, call records, etc.) before proceeding, if necessary.
2. Requires CUSTOM RECOVERY.(Mandatory)
STEPS:
1. Download appropriate flashable zipped GAPPS & ROOT files and copy it to the root directory of External SD card or Internal SD card.
2. Power-off the phone.
3. Put the phone in the CWM or TWRP Recovery Mode and for this you need to press Vol+ and Power button at the same time for few secs and then release the Power Button.
4. Flash the zipped files (one at a time): Select "Install ZIP" >> "choose zip from sdcard0 or sdcard1" depending on which SD card you have copied the file, external or internal >> Select Zipped File >> Click Yes to flash selected file.
(No need to do wipe data/factory reset and wipe cache partition)
5. After successful flashing, reboot the phone by selecting "reboot system now". If it ask to fix the permission when you reboot, select Yes.
7. Wait until you get the confirmation of successful flashing.
8. DONE. (Your phone will have GApps and Root Permission)
and don´t forget to hit thanx button to @navin_n, @fazerg and me maybe @DallasCZ

APPS taht can be remover (thanx navin_n)
If you have already Rooted your device then you can easily uninstall the system apps using "Root Uninstallers" available in Google Play.
However, for me , i prefer to use Root Explorer and delete the apps from system folder. The following apps are safe to delete but still i advise you to backup the files before deleting. If you use Root Explorer, make sure to change attribute of the system folder from Read Only (R/O) to Read Write (R/W) when deleting.
Be ware you make it on your own!! If there is also odex file, delete them too!!!
APPs that can be deleted:
folder --> /system/app
nubia_account.apk - only if you log in in nubia account (maybe you need this to use themes)
nubia_Calculator_v1.2.1.apk - calculator app (i dont like it so i installe another one and delete this)
nubia_Calendar_v1.0.apk - nubia calendar app
nubia_ClockWidget.apk - clock widget
nubia_Music.apk - nubia music player
nubia_myfile.apk - nubia file manager
nubia_NBSecurity.apk - nubia antivirus and system cleaner
nubia_NotePad_v1.1.5.apk - nubia notepad
nubia_zbiglauncher_v2.0.apk - nubia launcher for old people (everything is biiig)
NubiaPlatLogo_V1.0.0.apk - nubia lanim showing when you tap on NUBIA version in "about phone"
ZAppDataBackup.apk - nubia main app for backup your phone
ZDataBackup.apk - nubia backup app
ZQuickSearchBox.apk - nubia quick search box (if you install GAPPS it contains original google search box)
ZVideo.apk - very basic media player
If you dont use Live Wallpapers you cen delete the main app:
LiveWallpapersPicker.apk
and of course all livepaper apks
BasicDreams.apk
HoloSpiralWallpaper.apk
LiveWallpapers.apk
MagicSmokeWallpapers.apk
NoiseField.apk
PhaseBeam.apk
folder --> /system/preset_apps
TP_360AppStore_1.9.203.apk
TP_360Video_1.2.0_Nubia.apk
TP_BaiduInput_1000541a.apk
TP_baidumap_6.2.0.apk
TP_baiduvideo_5.3.0.apk
TP_gowhere_1044_131118_150501.apk
TP_iReader_2013122410.apk
TP_JdAndroid_2.6.0.apk
TP_QQ_4.2.apk
TP_QRCodeScaner_v1.0.apk
TP_tieba_5.5.2.apk
TP_Weibo_4.0.0_602.apk
TP_weixin_502.apk

Hi, I'm interested in buying this phone.. Could you tell me your first impressions?
It seems very good but I can't see any support for it, even if it has a Snapdragon 400..
Sent from my VOTO X2

DallasCZ said:
ROOT
the only way to root it so far is to run an Chinese exe, which will root your phone and install superuser (chinese one). Then you need to uninstall the superuser and install one from google play.
CWM
so far there is only chinese CWM 6.0.4.6..looking for someone who can make it english.
Click to expand...
Click to collapse
Hi, can you please provide me the exe file to root and explain me the process to root? I would be really grateful for your help! Thanks
I have WCDMA/GSM V5 3G 9180

ROOT CWM
Hello,
i made a simple bat file, which will root your phone, install custom recovery or original recovery.
here is the link: Dallas Google Drive.
you made everything on your own ..i am not responsible for any phone software/hardware damage.

jday17 said:
Hi, I'm interested in buying this phone.. Could you tell me your first impressions?
It seems very good but I can't see any support for it, even if it has a Snapdragon 400..
Sent from my VOTO X2
Click to expand...
Click to collapse
Hi,
there ar ea lot of Chinese phones, this phone is ment to be sell china only.
There are many forums but in Chinese.
I wrote a little review on gizchina.cz (is in Czech language,so use google translator)

TIP
For new users i recommend do this:
-boot your phone and see vhich version of formware you have (latest at this time is 0.50).
-If you have 0.44, then go to dialer and dial ##36. You get to the menu where you can select which server will be used for updates (at this time is 0.50 only for few people for feedback). then go to ybout phone and tap serach for updates and you get the update.
-after update is installed, go to about phone and tap 5times "build number" line , go back and go to "more" and "developer option" and turn on usb debugging.
-launch my root.bat, select root your phone and th ephone will reboot to bootloader and will be rooted.
-now you can install custom recovery (from my bat.file) it is bilangual CWM 6.0.4.9 recovery. Everything works fine as i used it.
-now after root and cwm recovery installed, make backup of your 0.50 rom and then you can proceed to delete bloatware (a lot of bloatware).
for rotted phones with CWM recovery:
if you want to make update from ZTE OTA, you have to load original recovery, the one in my package is not functional with update to 0.50 and above, so you have to flash from CWM recovery this package, then reboot and get the proper stock recovery, which will be functional with the update 0.44-0.50 and later.

DallasCZ said:
For new users i recommend do this:
-boot your phone and see vhich version of formware you have (latest at this time is 0.50).
-If you have 0.44, then go to dialer and dial ##36. You get to the menu where you can select which server will be used for updates (at this time is 0.50 only for few people for feedback). then go to ybout phone and tap serach for updates and you get the update.
-after update is installed, go to about phone and tap 5times "build number" line , go back and go to "more" and "developer option" and turn on usb debugging.
-launch my root.bat, select root your phone and th ephone will reboot to bootloader and will be rooted.
-now you can install custom recovery (from my bat.file) it is bilangual CWM 6.0.4.9 recovery. Everything works fine as i used it.
-now after root and cwm recovery installed, make backup of your 0.50 rom and then you can proceed to delete bloatware (a lot of bloatware).
for rotted phones with CWM recovery:
if you want to make update from ZTE OTA, you have to load original recovery, the one in my package is not functional with update to 0.50 and above, so you have to flash from CWM recovery , then reboot and get the proper stock recovery, which will be functional with the update 0.44-0.50 and later.
Click to expand...
Click to collapse
Thanks for the info! I'm currently updating to 0.5 and will let you know if I manage to root it too.
I`ve read the review and mine phone too has the squeaky back cover. It started squeaky after just few back panel removals. This is not a concern for me, but I wanted to ask you something else: How is you call quality? When I do calls the other side can hear me perfectly but the sound through my ear speaker is muffled and not very clear. Increasing the volume make it even worse. Do you experience such an issue?

-the back cover is really squeaky (i allready ordered another one)
-I am very happy vith the call quality. I had a nexus s whos volume vas up to 100%. Now i am about 60% and everything is loud and clear as i can hear
root and installing cwm is like a charm..i made it in the las 2 weeks (as i own the phone) about 10times
one Question: If you reboot the device do you also have the message "android is upgrading" every time no matter what you do or not do with the system?

DallasCZ said:
-the back cover is really squeaky (i allready ordered another one)
-I am very happy vith the call quality. I had a nexus s whos volume vas up to 100%. Now i am about 60% and everything is loud and clear as i can hear
root and installing cwm is like a charm..i made it in the las 2 weeks (as i own the phone) about 10times
one Question: If you reboot the device do you also have the message "android is upgrading" every time no matter what you do or not do with the system?
Click to expand...
Click to collapse
- I tried updating to 0.5 both through FOTA and with direclty downloaded update from the chinese official site to the sd card, but I always get some error (forgot what it was), will try tomorrow once again.
- My apps are upgrade after each reboot too. I was hoping that 0.5 will fix this issue, but It seems this is not the case.
- I'm on the hunt for a new back cover too, but I will wait for the official blue ones Share your thoughts on the one you purchased after a few days of usage
My only problem with the phone I experience is the bad incoming sound quality during calls. I will have try another sim card.
ps: boy this phone is a beauty

HuKuTo said:
- I tried updating to 0.5 both through FOTA and with direclty downloaded update from the chinese official site to the sd card, but I always get some error (forgot what it was), will try tomorrow once again.
- My apps are upgrade after each reboot too. I was hoping that 0.5 will fix this issue, but It seems this is not the case.
- I'm on the hunt for a new back cover too, but I will wait for the official blue ones Share your thoughts on the one you purchased after a few days of usage
My only problem with the phone I experience is the bad incoming sound quality during calls. I will have try another sim card.
ps: boy this phone is a beauty
Click to expand...
Click to collapse
Hi, can you please tell the name of chinese official site for our phone? thanks!

SITES IN cHINESE LANGUAGE
Hello,
so there are many sites. To see attachments you have to register to the sites, which is a little bit tricky due to instatnt need of translation in the registration process, but it can be done.
official with a lot of new information also from ZTE service:ztehn.com
the best for custom ROM and Recovery (development):anzhi.com
to see anzhi.com you need to add two adress in your windows hosts file see here
also some good information can be found here on myzte.cn

another tip
-If you get the "android is upgrading" on every boot, then you have to uninstall titanium backup, reboot, wait 3 minutes and let the system settle down, then install titanium again, reboot, and its done.
-if you want to restore WIFI access point and passwords form Titanium Backup, use backup from tar file, not from XML!!!

Waiting on a custom rom
Hello everyone,
I used the method I found at needrom.
It did the trick; the device was rooted, gapps installed, an multilangual.
But I didn't manage to install the latest update (50). I thought it was because the device was rooted, so I removed root, whitout succes, I am still not able to install the update.
Also I think the contact manager is buggy; newly added contacts dissapear after rebooting the device, it doesn't matter if I sync the device. I have to import my contacts from my SD card every time this happens.
So, I hope there comes a good custom rom for this device with this excellent hardware! I have Miui unofficiall on my Xiaomi Mi2s, it works like a charm. I hope soon this device appears on the list one of these days

update
-if you installed the ROm from needrom, i think you cannot upgrade to 0.50.
-on www.ztehn.com you can download the full 0.50 rom (only english and chinese language) this rom you can flash.
-contacts: If you are in contacts, press "more" and "advanced" and check the "default storage" it must be set to your google account. Then go back and check "display settings" and check which accounts are to show in contact list.
I had same problem and the problem was, that all new contact automaticly save to local storage and i have the local storage unchecked to display..so i havent seen my newly added contacts!!!

I have same issue
I have same isse. I dont hear anyone. But everyone hear me. i think that built in speaker doesnt work.

ZTE v5 DualSIM v1.06 beta released (4.4.2 + Nubia UI 2.0, package contains new recovery, H106 update package and G050 restore package)
http://pan.baidu.com/share/link?shareid=2878143782&uk=2436317143 Pass: [COLOR=#0640]j7cb
MD5:[/COLOR][COLOR=#0640]3C318AE402AC5424444F5862B540AF2D
[COLOR=#0640]Uploaded to my MEGA acc: link (1.06 unzipped too)
[COLOR=#0640]BETA release [COLOR=#0640]but seems stable (according to chinese forum feedbacks) I will try thi[COLOR=#0640]s next week, when i receive my v9180 2/8G. [/COLOR][/COLOR][/COLOR]
[/COLOR][/COLOR]

I sucessfully installed 1.06 and its looking good so far. The problem Im facing is the "No connection to google servers" error when I try to add my google account. There is no playstore and I tried to manually install it trhough .apk but again no luck. Have you guys managed to run the playstore with this new firmware?

install my gapps package trough cwm recovery.

Rooting SM-T860 OneUi-3.1 and installing TWRP (UPDATE: Updating to latest version without losing data)

(EDIT)
OneUI 4.1 has finally arrived, if you haven't got your Tab s6 rooted, you can just follow the instructions below. This new part is for the people who followed the guide to root their Tab s6 and now want to update to the new firmware version without losing their data. This guide is inspired in https://forum.xda-developers.com/t/...te-rooted-device-whilst-keeping-data.4245989/. But for simplicity of search I have decided to place it here
(END OF EDIT)
I ran into some problems and took some time to figure out how to install TWRP and root the tablet. The normal procedure by which you flash TWRP and then flash Magisk doesn't work as the download mode won't accept non-official files.
Then, once I got my tablet rooted by the patching method of Magisk, I installed TWRP with their app and got stuck in the logo due to not formatting the data.
After some research and quite a lot of time, I managed to get around that and be able to do everything.
Here is a step by step detailed guide of how to do so.
ATTENTION: These modifications void your warranty and may brick your device. I am in no way responsible for any damage you may cause. Follow this guide at your own risk
Requirements:
-> Latest version of the firmware of your model (I used this site which had the latest version and decent download speeds https://galaxyfirmware.com/model/SM-T860)
(To find which version to download, go into the Phone app, and type *#1234#)
-> Latest Magisk.apk file (https://github.com/topjohnwu/Magisk/releases)
-> Disbale_Dm-Verity_ForceEncrypt zip file (https://zackptg5.com/android.php#disverfe)
-> Latest TWRP img (https://eu.dl.twrp.me/gts6l (europe) or https://dl.twrp.me/gts6l (americas))
-> Official TWRP tool (Play Store)
-> Samsung drivers (https://developer.samsung.com/android-usb-driver)
-> Latest Version of Odin (https://odindownload.com/SamsungOdin)
-> SD Card or Minimal ADB and Fastboot (https://forum.xda-developers.com/t/tool-minimal-adb-and-fastboot-2-9-18.2317790)
(If SD card)
Copy Magisk, AP file from the firmware zip, Disable_dm zip and TWRP img into the SD card, else, you will have to use adb sideload
0. Create a backup of all your data (we are going to wipe the data of the tablet)
(Tablet)
1. Activate developer settings (go to Settings->About Tablet->Software information, and tap 5 times on build number).
2. Go into developer settings and activate OEM unlocking and USB debugging.
3. Turn off the tablet and turn it back on pressing Power + Vol. Down buttons to enter Device Unlock Mode.
4. Press and hold Vol. Up and in the next menu, press Vol. Up to unlock the bootloader (attention, this will erase all of your data)
5. Run through the setup, but be sure to activate the internet (this will prevent the tablet from relocking).
6. Activate developer settings again, and go into it to check that OEM unlocking is greyed out.
7. Install Magisk
(PC)
8. (No SD) Copy the AP file to the Tablet.
(Tablet)
9. Go into Magisk, press Install->Patch a file->Recovery mode (on)->Select file (The AP file).
10. Copy the patched file back into your computer.
11. Shut down the tablet.
12. Press Vol. Up + Vol. Down and connect the tablet to your computer with a USB to enter download mode.
(PC)
13. Open Odin, it should show that your device is connected.
14. Go to the settings tab and uncheck the Auto-Reboot option.
15. Flash all the files of the latest firmware, using CSC (not HOME_CSC) but substituting the AP file with the patched one. (With the WiFi version, you might not have a CP file, don't worry)
CRITICAL STEP (if not followed correctly, may lead to bootloop)
(Tablet)
16. Once the flashing is complete, press Vol. Down + Power during 7 seconds to restart the tablet. As soon as the screen blacks out, swap to Vol. Up + Power (and keep pressing even though it asks to press power) to enter the recovery.
17. In the recovery, navigate to Wipe data/factory reset with the volume buttons and press power button to select. Confirm and reboot.
18. While rebooting, you need to press Vol. Up + Power during 3 seconds (Until the press power to continue appears). This is due to Magisk being installed in the recovery partition.
19. Run through the setup again, but this time you need to login into your google account to enter the Play Store.
20. You should have the Magisk app installed. Open it and it will configure itself.
21. When it reboots, press again Vol. Up + Power for 3 sec.
22. Download the Official TWRP app.
(PC)
23. (No SD) Copy the latest TWRP image previously downloaded into the tablet.
(Tablet)
24. Go into the TWRP app and give it root permissions.
25. Enter TWRP flash and select the latest TWRP img
26. Go into the reboot menu and select reboot recovery.
27. The phone will reboot into TWRP.
28. Tick don't show this message again and slide to allow modifications.
29. Wipe -> Wipe data, Cache and Dalvik and Format data.
30. Reboot -> Recovery.
31. (SD) Flash Disable_DM-Verity zip, and then flash Magisk zip.
32. (No SD) enter the advanced menu and open adb sideload. Connect to the PC, open Minimal adb and fastboot and adb sideload the zip files.
33. Reboot system
Congrats, you have a rooted Samsung Galaxy tab S6 with TWRP installed!
FAQ:
1) Ok, I f* up, I am now stuck in the Samsung logo, what do I do?
Press Power and Vol. Down for 7 seconds, this will auto reboot your tablet. Then, as soon as the screen goes off, try to press Vol. Down + Vol. Up and connect through USB to the PC. With some luck, you manage to get into download mode. If you don't, repeat.
Flash the files with the Magisk modified AP, reboot into recovery and factory reset (follow the next instructions if you want to install TWRP), or else flash the stock rom.
2) I am seeing some screens with some warning messages, is that Ok?
Yes, it is normal, Samsung does that to scare people off from installing modifications on their devices. Can I take them off? Yes, but it is not a simple process. If you really want to, follow this guide, but adapting to the device (https://forum.xda-developers.com/t/...sage-on-samsung-a30-after-root-device.3954589). Another important thing is, when you want to enter recovery, you need to keep pressing Vol. Up + Power, even when the tablet displays the message that asks to press the power button.
3) Don't know... You ask

Works perfectly, thank you!

I have a question: to decrypt the internal memory which files can I flash?

Database Info

welcome