Cautions:
1.your warranty is now void.
2.do this at your own risk.
3.read the whole post before starting.
Flashing CWM recovery and taking backup :
1. Download the package and extract all files.
2. Extract the driver.zip located in drivers folder->1
3. Install the driver.if your OS is 64bit then install the x64 one.if the OS is 32bit,then the x86 one.
4. Open researchdownload application
5. Select the 2nd button with double cog sign.
6. Now a new window will appear like the screenshot attached.
7. Right click on the file name field.choose the files located in "Required files" folder of the package.
be careful here.Put fdl1 in fdl1 field,fdl2 in 2nd field and the recovery image(extract the "CWM-recovery-SC8810-nonpadded.zip") in recovery field. Then press the "OK" button.
8. Press the Start (Play) button in ResearchDownload -application (third button).
9. Turn off the phone.
10. Keep holding the "- volume" key. Without releasing the button "- volume" plug the usb cable
11. The process of CWM- burning should be started now in ResearchDownload-application and it will take approximately 1 Minute.
I think you can release the Vol.Button, but I had kept it nevertheless.
12. Wait until the CWM-flashing has been finished (A green sign will appeare and "Passed" will be shown in ResearchDownload- application window).
13. Remove the battery, wait 20 seconds. Put battery back and turn on the phone.
14. now hold the vol (-) and power button until the screen flashes (40 seconds or less or more) and now you are in the CWM recovery menu.
15. PLEASE make a full backup by the "backup and restore" option .make sure there's about 500mb free space in your micro SD card.
16. after the backup reboot the phone and PLEASE store the backup files in somewhere else..(the whole ''clockworkmod'' folder)
congratulation. you have done a full backup and flashed your CWM recovery.
Rooting device:
*don't do this.if u find that your backup size is lower than 250mb~300mb(slight +/- may occur)
1. download and put the "superuserandfullbackup.zip" in your micro SD card
2. power off your device.
2. Reboot to Recovery by holding volume (-) and power button until the screen flashes and recovery menu comes.
3. just go to "install zip from sdcard option and select the zip "superuserandfullbackup.zip"
4. flash it
5. reboot.
Advices:
Rooting is dangerous.so first make a full backup of your unrooted stock Rom just after flashing CWM.
Store the backup(size will be around 250mb~300mb(+/- ) in someplace safe.it's the life of your phone.If anything goes wrong,it's the only key to fix your phone.......be careful.........
Getting back your warranty:
Restore your stock Rom's backup.Then,flash the stock recovery(included in the package.find it in RECOVERIES folder),in the same way you've flashed the CWM.
good luck.and thanks for reading this.
Related
CWM 5.0.2.8
Instructions
A. To enter the recovery, you need to disable the device to clamp down "on" and press "Volume -".
Two. In order to mix between the elements in recovery need to use the "Volume -" and "Volume".
Three. To select a menu item, use the "House" (In the previous menu selection was carried out rekaveri button "on", so now this button is not working and when you click on it will be a blank screen with the logo of CWM (if you accidentally clicked on, then return in the normal state can press the button one more time "on" button or menu).
4. To go back to paragraph (meaning back), you should use the "Back"
Five. Like everything, if anyone has found the comments about the instructions, you can write to me about it in the LS
Installation manual
A. Unzip the downloaded archive
Two. Go to the folder "ClockWorkMod v5.0.2.8 by RusTorg and SaNek011"
Three. Run the file "install.bat"
4. Connect the phone mode or in "DFU" (http://4pda.ru/forum/index.php?s=&showtopic=300717&view=findpost&p=13072356) or "FTM" (need androyd off above 2.1!)
Five. Follow the instructions in the program
6. After installation, you will automatically fall into recovery on this installation is finished
Setting the phone
A. Download the archive.
Two. Remove from the archive file "CMW-5.0.2.8-v9.img".
Three. Put the SD and rename the "recovery.img".
4. In a terminal enter
su
flash_image recovery / sdcard / recovery.img.
Five. In this set rekaveri: happy:!
---------------------------------------
http://translate.google.com
DOWNLOAD
Hi guys
Straight on topic its 100% safe if you have brains.
Requirments
1-- odin3 installes on pc
2-- cwm recovery for your model
3-- a samsung galaxy device non rooted
4-- 50% or more battery
5-- kingroot update package
Not follow steps blindly
1-- go to setting - about device and tap 10 or more times on build number till you see "you are a developer now".
2-- go to developer option and enable usb debugging.
3-- switch off your device. Now press power + vol.down + home button to go to download mode.
4-- connect your device to your pc and open odin3.
5-- now on anseoid device press vol.up to continew.
6-- do not disturbe any option in odin. Paste the recovery.tar or recovery.img in odin folder and choose recovery in pda option and when brousing is done hit on start.
7-- your phone will reboot normally after some time.
8-- now power off device and press power + home + vol.up to boot to cwm recovery and use vol keys to scroll and power key to select.
9-- select backup and restore option and select backup. ( make shure you have an external sd card and atleast 1.8 gb is free in that).
10-- after you made a nandroid backup. Reboot your device normally and you will find a folder as clockworkmod. Inside that is your nandroid backup
Save that whole foldef onto pc. Never delete it.
THIS IS A NANDROID BACKUP YOU WILL NEED IN FUTURE FOR REPARING HARD OR SORT BRICKED DEVICE SO DO NEVER DELETE IT.
11-- now you have a custom recovery and nanddoid backup installed.
12-- reboot again to recovery and select install zip from sd card and choose the update zip and hit yes.
13-- when its done reboot normally and you have a rooted 100% wprking ssung galaxy device.
Hit thanks if it helped.
I will try providing the update.zip
If any problem my id is
[email protected] you can email me
Peace
There is no need for this, as there are numerous resources already available on how to root a Samsung device. Also, the methods described in your guide do not work for all Samsung Galaxy devices, and can be harmful to some devices. Unless you've actually fully vetted the methods you are posting, it's best not to post a guide.
Thread closed
Xposed
Notes : This is Xposed Framework + Modules. Please take a Backup of ur ROM if in case going to "soft-brick" ur device.
Pre-Requesites
Root access (# or superuser/supersu)
It is important to perform this to access the application to system partition to modify sensitive files.
BusyBox ( Stericsson/JRummy)
It is also recommended to install this after rooting ur device to be able the root access work properly and enable all features.
Custom Recovery (TWRP/CWM (official/unofficial) )
This is also recommended to install this after rooting and busybox installation. You need this to flash zip files (flashable zip file to device) and installing or updating ROM.
InstallationStep 1 : Install the zip through recovery. Not in normal Mode. To open recovery, Turn off your phone and after vibrates, Press and hold Vol- and Power button. On some devices, Vol+ and Power button On any other devices Vol+ + HomeButton +Power. (Samsung Devices) On any other devices While the phone is needed to turn on and while in home screen press and hold Power button + Volume- + Volume + ( Do IT Quickly) (Nexus Devices) and for Other Sony devices Power button and while in SONY Logo, a couple of Press Volume- and will enter into recovery mode. If you see that there's 'enter recovery', press power button.
Step 2 : (CWM RECOVERY) Press volume- and volume+ to scroll the highlight and power button is select. If you're using an old recovery, follow this. install zip --> apply update from sdcard /external sd or storage/sdcard0 or storage/sdcard1 and select the zip file. move the highlight to install "blahblahblahxyz.zip'' and reboot your phone.
Step 2. 1 : TWRP RECOVERY if u use touch version, go to install --> and select the directory under sdcard foler and swipe the arrow to flash and reboot your phone.
Step 3 : When your phone is booted up, it will install the Xposed installer , Flat style Indicator and Flat Style Colored Bar . Open the Xposed Installer and go to Framework , tick Install/Update and Press back button 2x . And go to Modules , tick checkbox the Flat Style Colored Bar and Flat Style Indicator.
Reboot
After reboot If bootloop presents, go to recovery and restore your back up ROM. :laugh: I have some screenshots.
Take note that the SystemUI in notification shade doesn't change and it will not replace SystemUI.apk
THUMBS UP and HIT THANKS.,. :good: :good:
XDA Assist is not the place for this.
Thread closed.
THIS WILL VOID YOUR WARRANTY OR MAY BRICK YOUR PHONE IF NOT DONE CORRECTLY.
I made this because i wanted to play AR games on an unsupported phone, so i want to help other people.
Follow this tutorial CLOSELY, or you'll mess up your phone
WARNING: THIS POST IS DIVIDED IN TO PARTS, IF YOU'RE HERE FOR THE A20e ROOT GUIDE, PLEASE CLICK (Coming soon)
1.0: Preparing.
1. Get your firmware from Sammobile or other sites
Get the NEWEST firmware that is from YOUR COUNTRY.
2. Download and install samsung mobile drivers.
3. Download ODIN Flash tool.
1.1: Unlocking your bootloader.
From this point on, you are taking a risk. You will void your warranty if you continue, i cant stress this enough.
1. Open the settings app, and navigate to: Device Info>Software Information and press Build number 7 times in a row. You will now have access to the developer settings.
2. Navigate back to settings, scroll down and press on "Developer settings"
3. Now, you should see a button called "OEM Unlock". PRESSING THIS WILL WIPE ALL OF YOUR DATA. (Which is normal.)
4. Go through the inital setup, and dont enter your data YET. Dont turn on wifi aswell, since youre going to wipe your data again later.
5. Now, turn off your phone.
6. When your phone is turned off, hold the Volume UP and DOWN button, and plug in your USB-Type C cable.
7. Now, hold the volume UP button for 8 seconds, until the screen changes. Press the volume UP button afterwards. Your data will get wiped again.
8. Go through the initial setup AGAIN, connect to wifi, but DONT enter your google/samsung account data just yet.
You have now unlocked your bootloader.
1.2: Unpacking your boot image.
1. Once you have the firmware, extract it using 7-Zip (Or any other extraction program).
2. You should now have a file called "boot.img.lz4"
3. Download the LZ4 Program on Github.
4. -Extract the zip in any EMPTY folder.
-Put the "boot.img.lz4" into the folder.
-Open CMD. Navigate to the folder you extracted LZ4 into.
- use this command to extract it: "lz4.exe -d boot.img.lz4 boot.img
- Done, now put the "boot.img" to your phone storage.
1.3: Patching the boot image.
1. After you copied the "boot.img" to your phone storage, open magisk manager.
2. Now, select the Install button on the TOP. Press "Patch an image"
3. Select the "boot.img" file you copied from your PC.
4. Wait.
5. Done. Copy the "magisk_patched.img" file to your computer.
6. Convert the ".img" file into a ".tar" file.
2.0: Rooting: Flashing the .tar to your phone.
Follow closely.
1. Turn off your phone, and hold the volume UP and Power button at the same time. After you booted into the recovery, select "reboot into bootloader".
2. Open odin, and firstly go to "options" and untick "Auto reboot". Then, press the "AP" Slot, and select the "magisk_patched.tar" file.
3. Connect your USB Cable, and press "start".
4. it should now say "PASS"
2.1: Rooting
1. hold the volume DOWN and Power button for 7 seconds.
2. QUICKLY hold the volume UP and Power button
3. Select "Wipe data". Press yes.
3. Now, go through the initial setup. You can now enter your data, since we arent wiping our phone anymore.
3. Final Touches
1. Download Magisk Manager again. Open it, and it will install a zip. It will automatically restart.
2. Open magisk manager. If there is a GREEN tick on the top, Well done! You've made it!
You are done with rooting your phone! you can now leave, or continue if you want to play AR games.
Other: AR Compatibility
1. Open magisk manager, press the 3 lines on the top left, and select "downloads"
2. Search "ARCore"
3. Install it, and reset your phone.
4. Now, go to the play store and install "ARCore"
5. You have AR access! Download games like "FNaF AR" or anything else.
This guide will get updated every week.
anyone can confirm this'll work?
Chiryn said:
anyone can confirm this'll work?
Click to expand...
Click to collapse
I tried it, but it didn't work. I think I downloaded a bad firmware tho. I am going to try it now. Btw. if you want an easy firm download I highly recomend Frija v.1.3.0. - only easy, fast and WORKING (at least for me) firmware downloader.
I am stuck at odin saying NAND Write Start!!.
Could anyone help me?
(EDIT)
OneUI 4.1 has finally arrived, if you haven't got your Tab s6 rooted, you can just follow the instructions below. This new part is for the people who followed the guide to root their Tab s6 and now want to update to the new firmware version without losing their data. This guide is inspired in https://forum.xda-developers.com/t/...te-rooted-device-whilst-keeping-data.4245989/. But for simplicity of search I have decided to place it here
(END OF EDIT)
I ran into some problems and took some time to figure out how to install TWRP and root the tablet. The normal procedure by which you flash TWRP and then flash Magisk doesn't work as the download mode won't accept non-official files.
Then, once I got my tablet rooted by the patching method of Magisk, I installed TWRP with their app and got stuck in the logo due to not formatting the data.
After some research and quite a lot of time, I managed to get around that and be able to do everything.
Here is a step by step detailed guide of how to do so.
ATTENTION: These modifications void your warranty and may brick your device. I am in no way responsible for any damage you may cause. Follow this guide at your own risk
Requirements:
-> Latest version of the firmware of your model (I used this site which had the latest version and decent download speeds https://galaxyfirmware.com/model/SM-T860)
(To find which version to download, go into the Phone app, and type *#1234#)
-> Latest Magisk.apk file (https://github.com/topjohnwu/Magisk/releases)
-> Disbale_Dm-Verity_ForceEncrypt zip file (https://zackptg5.com/android.php#disverfe)
-> Latest TWRP img (https://eu.dl.twrp.me/gts6l (europe) or https://dl.twrp.me/gts6l (americas))
-> Official TWRP tool (Play Store)
-> Samsung drivers (https://developer.samsung.com/android-usb-driver)
-> Latest Version of Odin (https://odindownload.com/SamsungOdin)
-> SD Card or Minimal ADB and Fastboot (https://forum.xda-developers.com/t/tool-minimal-adb-and-fastboot-2-9-18.2317790)
(If SD card)
Copy Magisk, AP file from the firmware zip, Disable_dm zip and TWRP img into the SD card, else, you will have to use adb sideload
0. Create a backup of all your data (we are going to wipe the data of the tablet)
(Tablet)
1. Activate developer settings (go to Settings->About Tablet->Software information, and tap 5 times on build number).
2. Go into developer settings and activate OEM unlocking and USB debugging.
3. Turn off the tablet and turn it back on pressing Power + Vol. Down buttons to enter Device Unlock Mode.
4. Press and hold Vol. Up and in the next menu, press Vol. Up to unlock the bootloader (attention, this will erase all of your data)
5. Run through the setup, but be sure to activate the internet (this will prevent the tablet from relocking).
6. Activate developer settings again, and go into it to check that OEM unlocking is greyed out.
7. Install Magisk
(PC)
8. (No SD) Copy the AP file to the Tablet.
(Tablet)
9. Go into Magisk, press Install->Patch a file->Recovery mode (on)->Select file (The AP file).
10. Copy the patched file back into your computer.
11. Shut down the tablet.
12. Press Vol. Up + Vol. Down and connect the tablet to your computer with a USB to enter download mode.
(PC)
13. Open Odin, it should show that your device is connected.
14. Go to the settings tab and uncheck the Auto-Reboot option.
15. Flash all the files of the latest firmware, using CSC (not HOME_CSC) but substituting the AP file with the patched one. (With the WiFi version, you might not have a CP file, don't worry)
CRITICAL STEP (if not followed correctly, may lead to bootloop)
(Tablet)
16. Once the flashing is complete, press Vol. Down + Power during 7 seconds to restart the tablet. As soon as the screen blacks out, swap to Vol. Up + Power (and keep pressing even though it asks to press power) to enter the recovery.
17. In the recovery, navigate to Wipe data/factory reset with the volume buttons and press power button to select. Confirm and reboot.
18. While rebooting, you need to press Vol. Up + Power during 3 seconds (Until the press power to continue appears). This is due to Magisk being installed in the recovery partition.
19. Run through the setup again, but this time you need to login into your google account to enter the Play Store.
20. You should have the Magisk app installed. Open it and it will configure itself.
21. When it reboots, press again Vol. Up + Power for 3 sec.
22. Download the Official TWRP app.
(PC)
23. (No SD) Copy the latest TWRP image previously downloaded into the tablet.
(Tablet)
24. Go into the TWRP app and give it root permissions.
25. Enter TWRP flash and select the latest TWRP img
26. Go into the reboot menu and select reboot recovery.
27. The phone will reboot into TWRP.
28. Tick don't show this message again and slide to allow modifications.
29. Wipe -> Wipe data, Cache and Dalvik and Format data.
30. Reboot -> Recovery.
31. (SD) Flash Disable_DM-Verity zip, and then flash Magisk zip.
32. (No SD) enter the advanced menu and open adb sideload. Connect to the PC, open Minimal adb and fastboot and adb sideload the zip files.
33. Reboot system
Congrats, you have a rooted Samsung Galaxy tab S6 with TWRP installed!
FAQ:
1) Ok, I f* up, I am now stuck in the Samsung logo, what do I do?
Press Power and Vol. Down for 7 seconds, this will auto reboot your tablet. Then, as soon as the screen goes off, try to press Vol. Down + Vol. Up and connect through USB to the PC. With some luck, you manage to get into download mode. If you don't, repeat.
Flash the files with the Magisk modified AP, reboot into recovery and factory reset (follow the next instructions if you want to install TWRP), or else flash the stock rom.
2) I am seeing some screens with some warning messages, is that Ok?
Yes, it is normal, Samsung does that to scare people off from installing modifications on their devices. Can I take them off? Yes, but it is not a simple process. If you really want to, follow this guide, but adapting to the device (https://forum.xda-developers.com/t/...sage-on-samsung-a30-after-root-device.3954589). Another important thing is, when you want to enter recovery, you need to keep pressing Vol. Up + Power, even when the tablet displays the message that asks to press the power button.
3) Don't know... You ask
Works perfectly, thank you!
I have a question: to decrypt the internal memory which files can I flash?