Database Info

Micromax a 45 - ALL THINGS ROOT !

I've decided to open this thread for development md mmx ninja a45 .
Rom dump :
http://www.mediafire.com/?gla8fgpwl0r0hvf
ROOTING (credits:rishu)
pre requisites *a45 drivers and *superoneclick
firstly dissable ur antivirus...
1)download drivers available at micromax's site
2)Connect your device on your PC and be sure that USB Debugging is enabled.
Your PC will ask on how will you install the driver, choose “Install from a specific location” then navigate to where you had downloaded earlier.
3)After drivers has been already installed, open super one click.
4)Click the “Root” button.
Then rooting will start automatically....
Installing CWM: (credits antonysabish)
Micromax A45 Clockworkmod
Recovery
Here's how to get Clockworkmod recovery
with SP Flash Tool:
1. Download SP Flash Tool.
2. Download MT6573_Android_scatter.txt.
3. Download a45recovery-cwm.zip and extract it.
4. Extract SPF Tool.zip and Run
Flash_tool.exe from there.
5. Click File->Open Scatter-loading file and
select the MT6573_Android_scatter.txt you
downloaded.
6. Now uncheck everything except
RECOVERY . Click on recovery and select
a45recovery-cwm.img you downloaded.
7. Now turn off your Micromax A45,
remove battery and put it back( DONT
switch it back on).
8. Press Download in the SP Flash Tool
window, then When the countdown starts,
connect your phone to PC.
9. After it's done, disconnect the phone,
remove battery and put it back. Boot the
phone into Recovery mode, You should
have Clockworkmod v5.8.1.9
download super one click : http://205.196.120.108/ll71hms5t67g/l291ej5damzoujk/SuperOneClickv2.3.3-ShortFuse.rar
Anyone interested please join

[GUIDE] [ROOT] Alcatel One Touch T' Pop

Hello again XDA, kirito9 here with another guide on how to root the Alcatel One Touch T'pop. I decided to make a guide because i have not seen any guide on XDA concerning this phone and rooting.
Disclaimer: Your warranty is now void. You do this in your own risk. I do not take any responsibility to your device.
BACKUP YOUR DEVICE BEFORE DOING ANYTHING IN THE EVENT SOMETHING GOES WRONG.
Requirements:
- Windows 7 PC ( tested only on this)
- ADB drivers
- MTK drivers
- MT6575 Scatter file
- CWM or TWRP recovery
- SP Flash Tools
- SuperSU
Lets Begin
Flashing CWM or TWRP
1. First thing to do is to make sure all required drivers are installed. Do that by downloading the Universal ADB driver from this link and install it.
2. Then install the MTK drivers so that SP flash tools can work. Get those here, extract and install the drivers for windows 7.
3. Download your preferred recovery either CWM or TWRP below and place somewhere on your computer where you can find it easily.
4. Download the SP flash tools here and extract them.
5. Download the MT6575 Scatter file attached below.
6. Download the SuperSU zip file and place it either on internal or external of the phone.
6. Go to the sp flash tools folder and run flashtool.exe as administrator.
7. Click on scatter loading and select the MT6575 scatter file you downloaded.
8. Click on the recovery checkbox and then click on the white space in location. Select the recovery of your choice.
9. Turn off the phone, remove the battery then reinsert it.
10. Click on download and then connect the phone.
11. Wait for the flashing to complete then remove your phone.
Rooting the phone.
1. Boot into recovery then go to install, select the SuperSu zip file and install it.
2. After the flashing is complete, reboot your phone and see the SuperSU app in the app drawer
Credits
- me
-Chainfire for his SuperSu

May you also upload any stock ROM for OT-4010D ???

[ROOT][CWM] Starmobile Play Boost CWM Recovery Port + Root Files

I've ported Lenovo a1000 cwm recovery to Starmobile Play boost!
link: below
JUST RENAME IT WITH "recovery.img" without quotes!
NOTE: THE CWM RECOVERY IS NOT FULLY PORTED.. (PROBLEMS IN LOGGING) you cant see the progress of
flashing fully but it works!
ROOT GUIDE:
TO ROOT STARMOBILE PLAY BOOST.. FLASH THE SUPERSU ZIP ROOT USING CWM RECOVERY I PROVIDED!
(it works! VERIFIED BY ME)
Link for supersu: below
METHOD FOR FLASHING THE RECOVERY:
MY METHOD IS INVOLVING WIPING DATA.. YOU CAN USE YOUR'E OWN METHOD BUT THIS IS THE METHOD I USE TO FLASH THE RECOVERY TO MY PHONE
INSTALL SPREADTRUM DRIVERS, LINK: below
INSTALLING SPREADTRUM DRIVERS NEEDED DISABLED DRIVER SIGNATURE ENFORCEMENT... LINK FOR DISABLING IT: below
SPREADTRUM UPDATE UTILITY:below
STARMOBILE PLAY BOOST STOCK ROM: below
STEPS FOR FLASHING: INVOLVES DATA WIPING!!!!
STEP 1: INSTALL SPREADTRUM DRIVERS: GUIDE:
STEP 2: EXTRACT THE STOCK ROM (.PAC) FILE AND THE UPGRADE UTILITY IN ONE FOLDER
STEP 3: OPEN THE "UpgradedDownload.exe" PROGRAM
STEP 4: PRESS THE SINGLE COG LOGO (OPEN PACKET FILE) AND LOCATE THE STOCK ROM .PAC TO THE SAME FOLDER
STEP 5: WAIT THE UTILITY TO EXTRACT THE FILES
STEP 6: AFTER THE FILES EXTRACTED, GO TO THE DIRECTORY OF THE UTILITY, YOU WILL SEE "ImageFiles" FOLDER, OPEN IT
STEP 7: YOU WILL SEE A FOLDER THERE NAMED "_DownloadFiles*******", OPEN IT!
STEP 8: ONCE YOU ARE THERE, DELETE THE EXISTING STOCK "recovery.img" THERE AND REPLACE IT WITH THE CWM THAT I PROVIDE "rename it with recovery.img"
STEP 9: GO BACK TO THE UTILITY AND PRESS THE PLAY BUTTON
STEP 10: TO START THE DOWNLOAD PROCESS:
TURN OFF YOUR'E DEVICE
MAKE SURE YOU INSTALLED THE SPREADTRUM DRIVERS CORRECTLY!
REMOVE THE BATTERIES
PUT THE BATTERIES BACK
PRESS VOL UP + POWER BUTTON WHILE PLUGGING THE USB CABLE
IT WILL START THE PROCESS
STEP 11: WAIT THE UTILITY TO STATE "passed" AND YOUR'E GOOD TO GO! "WIPED DATA + CWM RECOVERY INSTALLED!"
EXTRAS: ADB DRIVERS: below
GLAD TO HELP SOMEONE! to acquire links go to pastebin and /AGNYFQ62

Help!!!
Most of the links are expired or can't be found.....

TweakBox04 said:
Most of the links are expired or can't be found.....
Click to expand...
Click to collapse
email me here > [email protected]

TweakBox04 said:
Most of the links are expired or can't be found.....
Click to expand...
Click to collapse
yes it's impossible to find them

recovery img dropbox. com/s/83777cy ayia8ti3/STARM OBILE %20RECOV% 20CWM .img?dl=0
supersu root zip drop box .com/s/qfhl78 bifwawj3f/supe rsu-flashable- root.zip?dl=0
spreadtrum driver dropbox. com/ s/go1r5 xylh6ghmj k/android_spreadt rum_driver. zip?dl=0
disable driver signature enforcement guide packard-bell-scandic.cus thelp. com/app/answers/detail /a_id/38288/~/windows -10%3A-disable-signed-driver- enforcement
spreadtrum utility drop box. com / s/7nemx01hd0c u30u/SPD_ Upgrade_Tool_R17 .0.0001.zip?dl=0
stock rom needrom. com /download /starmobile-play- boost/
guide install spreadtrum drivers android mtk. com/ install-spreadtrum- usb-driver-manually
adb drivers dropbox.
com/ s/kwddnc xu000ue7 8/adb-setup-1. 4.3.exe?dl=0[
urls are not allowed to post sorry.

[CONFIRMED] How To Root Tecno W2

Pre-Requisites
1- You need a PC
2- Sp Flash tools
3- Twrp recovery( search Google)
4- 7zip
5- mtk vcom drivers(also search Google)
Let's Begin
: 1st step install the adb,do it right then reboot
2nd step unzip the twrp folder and get to the the end where you will see a scatter file and the recovery image, then minimize
3rd step open the spflash tools folder then double click on flash_tool
: 4th step click on the choose button in the middle of the three choose buttons you see
5th step locate the folder with the scatter file and twrp
6th step, you will see only the scatter file, double click on it
***********************
The real rooting begins here
***********************
: Click the download button, then put off your phone and remove the battery,
Then connect your phone to the pc
: It will then install twrp
: Once a good sign on the screen of the laptop, unplug the phone
: Then put back the battery of the phone
: Then press and hold the power button and volume up button at the same time till your recovery shows
: Click on the install button on twrp, then locate the SuperSU zip I sent to you, click it and swipe to install, then reboot...
:You should see the SuperSU icon in your app menu upon reboot

Good tut

I need a lineage 13 or 14- based custom rom for tecno w2. Any leads on where to find one? Thanks

Alcatel one touch pop c5 unroot,unbrick,flash stock rom

How To Flash Idea Alcatel One Touch 5036D done by Smart Phone Help
flash tool https://spflashtools.com/windows/sp-flash-tool-v5-1812
Firmware 1: http://infopade.com/4sSA
Password: touch
if the above firmware doesn't work for you, try this
Firmware 2: http://infopade.com/4sWN
Password - Gsmtel.in
like video: https://youtu.be/lwN-BLvenEo
Thanks for watching, & please remember to Like this video, if it helped you. I will answer all comments below,
Be sure to share with your friends. !!
Please Reply Me For More Future Videos !!
Once Again, Thanks For Watching Subscribe for more future videos
Steps:
- Step 1: Download and Install the android USB drivers on your computer. In case you have already installed them, you can skip this step.
Step 2: Switch off you Android Phone .
Step 3: Now download the stock ROM or the custom ROM which you want to install on your phone. After downloading, extract the zip file on you system.
Step 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.
Step 5: Form the files listed run the Flash_tool.exe file.
Step 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side.
Step 7: Now locate the scatter file in your custom or stock ROM. It is generally located in the bin/directory.
Step 8: Now click the Download button to start the downloading process.
Step 9: After completed all the above steps, connect your smart phone to your system using the USB cable and press any button other than power button so that your system will detect your device. You can use volume buttons.
Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your device and switch it ON.
Requirements:- Your phone must have atleast 40-50% of battery and USB Drivers