I've decided to open this thread for development md mmx ninja a45 .
Rom dump :
http://www.mediafire.com/?gla8fgpwl0r0hvf
ROOTING (credits:rishu)
pre requisites *a45 drivers and *superoneclick
firstly dissable ur antivirus...
1)download drivers available at micromax's site
2)Connect your device on your PC and be sure that USB Debugging is enabled.
Your PC will ask on how will you install the driver, choose “Install from a specific location” then navigate to where you had downloaded earlier.
3)After drivers has been already installed, open super one click.
4)Click the “Root” button.
Then rooting will start automatically....
Installing CWM: (credits antonysabish)
Micromax A45 Clockworkmod
Recovery
Here's how to get Clockworkmod recovery
with SP Flash Tool:
1. Download SP Flash Tool.
2. Download MT6573_Android_scatter.txt.
3. Download a45recovery-cwm.zip and extract it.
4. Extract SPF Tool.zip and Run
Flash_tool.exe from there.
5. Click File->Open Scatter-loading file and
select the MT6573_Android_scatter.txt you
downloaded.
6. Now uncheck everything except
RECOVERY . Click on recovery and select
a45recovery-cwm.img you downloaded.
7. Now turn off your Micromax A45,
remove battery and put it back( DONT
switch it back on).
8. Press Download in the SP Flash Tool
window, then When the countdown starts,
connect your phone to PC.
9. After it's done, disconnect the phone,
remove battery and put it back. Boot the
phone into Recovery mode, You should
have Clockworkmod v5.8.1.9
download super one click : http://205.196.120.108/ll71hms5t67g/l291ej5damzoujk/SuperOneClickv2.3.3-ShortFuse.rar
Anyone interested please join
This is a guide on rooting the Alcatel Pop C2 4032A using 2 methods.
Disclaimer: Your warranty is now void. You do this in your own risk. I do not take any responsibility to your device.
How to Root using the Framaroot method:
Enable unknown sources from settings to allow installation of third party apps.
Download latest framaroot.apk version from here .
Install framaroot and click on the Barahir root exploit.
Reboot device and enjoy root .
How to Root using the recovery method
Requirements
SP flash tools
Mtk VCOM drivers (preloader drivers)
ADB driver
USB Cable
Mtk6572 Scatter
Recovery of your choice
SuperSu zip
Android phone of course
Working brain
Download the SP flash tools and Mtk VCOM drivers and extract them to desktop.
Install the Mtk VCOM drivers.
Download the scatter file and place also on the desktop.
Download the SuperSu.zip and place it on the sdcard or internal storage.
Download the recovery of your choice and place it on your desktop
Open the folder with SP flash tools and run flash_tool as administrator
Select the scatter file by clicking on scatter loading
Check the recovery check box and click on location and select the recovery of your choice.
Turn off your phone.
Connect the usb cable to the computer but don't connect the phone as yet.
Click on the download button on the SP flash tool and then connect your phone to the computer.
Wait for it to flash and then reboot into recovery using adb commands once the phone has booted up.
Once the phone is in recovery select install zip from sdcard and locate the SuperSU.zip.
Reboot and there you go root access
To Enable USB Debugging.
1. Go to settings and about phone
2. Tap the build number 7 times to enable development mode.
3. Go back and then go in development mode.
4. Enable USB debugging.
Root : JB 4.2
Root LAVA iris 300
1. Download The Framaroot APK here and install it to your phone.
2. Goto Settings > Security > and tick “Unknown Sources“.
3. Run Framaroot, choose Superuser or SuperSU.
4. Select Boromir or Bahamir.
5. You will see Success.
6. Reboot device, Done. :good:
OR
1. Download The Kingoroot APK here and install it to your phone.
2. Run King Root application.
3. Click on Root button. It take sometime for the rooting process.
4. Reboot device, done. :good:
Stock Rom : JB 4.2
Unbrick your LAVA iris 300
1. Download Stock Rom from here (by xdafirmware)and extract it.
2. Download mtk_usb driver from here and install it.
3. Open Sp flash tool, select scatter.txt.
4. Click on download.
5. Power off your device (confirm off), then connect usb cable. (dnt press any key, flash with battery).
6. System will detect your device as mediatek_preloader_com.
7. Sp Tool will recognise your Phone and flashing will start.
8. Once the flashing process is completed, a green ring will appear on your system.
9. Dissconnect, Power On, Done :good:
Full Instructions with images here (by techsultan).
Nandroid Backup/restore (recommended)
Take Full backup of your LAVA iris 300
You can take full backup with Custom recovery (Carliv/TWRP).
OR
1. Download Mtkdroid tool here (by gsmhosting)and extract it.
2. Download Pdanet+ andoid usb driver from here and install it.
3. Install BusyBox.apk in your device from playstore.
4. Enable debugging mode on your phone > Settings > Development. Tap 'android usb debugging' and make sure it's checked.
(if there is no option for development then go to setting > about phone > build number, tap on it 7 times, Go back to Settings menu and now you'll be able to see “Developer options” there.)
5. Open MTK Droid Tools folder with right-click on 'MTKdroidTools.exe' and Select 'Run as administrator'.
6. Wait several seconds while MTK Droid Tools communicates with your device. give root permission to adb-shell on your device.
7. Click the 'root' button in MTK Droid Tools to get temporary root shell.
8. Now get nvram backup. For full backup go to 2nd tab click on backup.
9. Here will be saved all backup \MtkDroidTools\backups.
10. Prepare this backup to make it flashable through SP Flash Tool. To do it, click on To 'prepare blocks for Flash Tool.'
11. A new windows will appear asking for a .md5 file of the backup. So navigate to the MTK Droid Tools folder where your backup is found. Open the backup that your have created earlier and select the files.md5 click open.
12. Wait for MTK Droid Tools to copy the files for SP Flash Tool, check the status messages until the copying/task is complete. Done
Full Instructions with images here (by rajit).
Restore :
1. Open , SP Flash Tool.exe run as administrator. Load the scatter file (click scatter-loading) which you have prepared from MTK Droid Tools to be flashable through SP Flash Tool.
2. After you loaded scatter file, All must checked except for Cache and USERDATA and most importantly, do not check DSP_BL or Preloader else you'll brick it.
3. To restore device, click Download from SP Flash Tool, a prompt will appear, just click Yes. Immediately connect your Power OFF device to your computer via USB .
4. Wait for the tool to detect your device and restore the Stock ROM that you have made. An alert with a green circle appears after successfully downloading the restore.
Full Instructions with images here (by MTK Hacker Pro).
Custom Recovery : TWRP/CTR
( Download and flash it with Sp FLash tool. Press Vol up and Power Key to boot in Recovery. )
Twrp for LAVA iris 300
TWRP2.8.0 alpha here
Note : There is lots of bug in it. pls post here.
CTR for LAVA iris 300
Carliv 2.4 alpha here
Note : Flipped Screen Bug.
wahh! Now just make a best kitkat rom for 300 plz!! ur gr8
Guys This is the Guide to Root Leagoo KIICAA Mix-
Download Require Files-
1. Download SP flash tools https://androidfilehost.com/?fid=745425885120763929
2. V Com Driver Require https://androidfilehost.com/?fid=817550096634801170
3. twrp Require https://romprovider.com/2017/10/t-root-leagoo-kiicaa-mix/
4. Supersu Require https://forum.xda-developers.com/apps/supersu/v2-64-2-66-supersu-mode-t3286120
Instructions-
1. Install VCom Driver
2. Run SP flash tools and Load scatter from Recovery folder
3. check recovery only and under recovery section load twrp.img
4. click Download, and connect switched off Phone to PC
5. wait for success. Done twrp installed.
6. reboot to twrp by holding power and volume+ button
7. create a nandroid backup
8. flash supersu.zip, done successfully Rooted.
i hope You will get success.
which button(s) shoud i press on the installer?
when i press on the installer i have a lot of buttons(install miracle,install spd etc)
which i shoud i press?
and will it work on windows 7?
thanks
Hey there!
I would like to root this using a linux desktop, could you explain the process in more detail which tool is responsible for which function so I could try to adapt the process to function without a windows desktop?
kaefert said:
Hey there!
I would like to root this using a linux desktop, could you explain the process in more detail which tool is responsible for which function so I could try to adapt the process to function without a windows desktop?
Click to expand...
Click to collapse
Hi,
if you are running a debian based distro, you have first to install adb and fastboot from manager or using apt-get.
2/ check if file /etc/udev/rules.d/51-android.rules is present and contains correct description of your phone idVendor and idProduct
if not run lsusb and add the following line
Code:
SUBSYSTEMS=="usb", ATTRS{idVendor}=="your idVendor", ATTRS{idProduct}=="your idProduct", MODE="0666" GROUP="androiddev", SYMLINK+="android%n"
3/ service udev restart
4/ unplug and plug again your phone and run adb devices, it will show a long number and letters with UNAUTHORIZED. that's OK
5/enter fastboot mode and unlock your bootloader with : fastboot oem unlock
6/ enter fastboot mode when booting your phone and type this: fastboot flash recovery recovery.img
( you have to rename twrp.img to recovery.img)
that's done you can now boot to twrp and install su.
hey there avrmge!
thanks for the reply, but I already sent the device back to the seller, it was too far below my expectations.
kaefert said:
hey there avrmge!
thanks for the reply, but I already sent the device back to the seller, it was too far below my expectations.
Click to expand...
Click to collapse
Hello,
the procedure above generally works with any other android device,
i think the main problem with this phone is lack of notification led, no 3.5mm jack and sometimes battery drains too fast. except that, it is as normal as other models in same segment. what were your expectations ?
well, I was disappointed with the problems you mentioned and also:
-) no light sensor ( --> no automatic brightness)
-) accelerometer has only 2 axis working
-) no gyroscope
-) no proximity sensor
boot loop after root ! Ur guide to the hell
mark332 said:
Guys This is the Guide to Root Leagoo KIICAA Mix-
Download Require Files-
1. Download SP flash tools https://androidfilehost.com/?fid=745425885120763929
2. V Com Driver Require https://androidfilehost.com/?fid=817550096634801170
3. twrp Require https://romprovider.com/2017/10/t-root-leagoo-kiicaa-mix/
4. Supersu Require https://forum.xda-developers.com/apps/supersu/v2-64-2-66-supersu-mode-t3286120
Instructions-
1. Install VCom Driver
2. Run SP flash tools and Load scatter from Recovery folder
3. check recovery only and under recovery section load twrp.img
4. click Download, and connect switched off Phone to PC
5. wait for success. Done twrp installed.
6. reboot to twrp by holding power and volume+ button
7. create a nandroid backup
8. flash supersu.zip, done successfully Rooted.
i hope You will get success.
Click to expand...
Click to collapse
I need help, when i try to install the vcom drivers, i get an error. i can,t post image so...
can you add video?
how to imei change?
Maybe it's not the place but is there someone who get complain on that the speaker is so low can I increase it and make it louder cause people say we can't here you please help
mark332 said:
Guys This is the Guide to Root Leagoo KIICAA Mix-
Download Require Files-
1. Download SP flash tools https://androidfilehost.com/?fid=745425885120763929
2. V Com Driver Require https://androidfilehost.com/?fid=817550096634801170
3. twrp Require https://romprovider.com/2017/10/t-root-leagoo-kiicaa-mix/
4. Supersu Require https://forum.xda-developers.com/apps/supersu/v2-64-2-66-supersu-mode-t3286120
Instructions-
1. Install VCom Driver
2. Run SP flash tools and Load scatter from Recovery folder
3. check recovery only and under recovery section load twrp.img
4. click Download, and connect switched off Phone to PC
5. wait for success. Done twrp installed.
6. reboot to twrp by holding power and volume+ button
7. create a nandroid backup
8. flash supersu.zip, done successfully Rooted.
i hope You will get success.
Click to expand...
Click to collapse
I am having problems with twrp when installing and starting in recovery mode it freezes me forcing to restart the device
mark332 said:
Guys This is the Guide to Root Leagoo KIICAA Mix-
Download Require Files-
1. Download SP flash tools https://androidfilehost.com/?fid=745425885120763929
2. V Com Driver Require https://androidfilehost.com/?fid=817550096634801170
3. twrp Require https://romprovider.com/2017/10/t-root-leagoo-kiicaa-mix/
4. Supersu Require https://forum.xda-developers.com/apps/supersu/v2-64-2-66-supersu-mode-t3286120
Instructions-
1. Install VCom Driver
2. Run SP flash tools and Load scatter from Recovery folder
3. check recovery only and under recovery section load twrp.img
4. click Download, and connect switched off Phone to PC
5. wait for success. Done twrp installed.
6. reboot to twrp by holding power and volume+ button
7. create a nandroid backup
8. flash supersu.zip, done successfully Rooted.
i hope You will get success.
Click to expand...
Click to collapse
when i open twrp, it asks for a password. my phone doesn't have any password, and i need it to install a custom rom. is there someone able to help me? bc i really can't understand
*im assuming that i have to unlock oem, but is it really necessary?
Ciao, ho installato la twrp tutto a posto, poi ho messo pixel 1.2 rom, ma audio in telefonata pessimo mi serve un aiuto per migliorare grazie
I installed a proper twrp (fastboot flash)
Leagoo KIICAA Mix 3.1
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
REQUIREMENTS:
1. YOUR DEVICE ie Panasonic P71 or any Panasonic Device
2. YOUR STOCK BOOT.IMG OF YOUR DEVICE OR
FOR PANASONIC USER DOWNLOAD FIRMWARE FROM THIS SITE AND EXTRACT IT, U WILL FIND THAT BOOT IMAGE
SITE:
3. PC INSTALLED WITH MTK VCOM DRIVERS PROPERLY
4. SP FLASH TOOL ON YOUR PC
5. MAGISK MANAGER APK INSTALLED ON YOUR PHONE
6. ROOT CHECKER APP DOWNLOADED ON YOUR PHONE FROM PLAYSTORE.
PROCEDURE:
1. COPY AND PASTE YOUR STOCK BOOT.IMG FROM PC TO YOUR PHONE.
2. NOW OPEN MAGISK MANAGER ON YOUR PHONE AND CLICK ON INSTALL , THEN CLICK ON PATCH BOOT IMAGE FILE
.
3. AFTER THIS SELECT THE STOCK BOOT.IMG WHICH U COPIED EARLIER ON YOUR PHONE.
4. AFTER THIS SOME PROCESS WILL EXECUTE, LET IT COMPLETE, AFTER IT IS COMPLETED U WILL SEE MESSAGE: ALL DONE. NOW CLOSE MAGISK MANAGER AND CHECK YOUR PATCHED BOOT.IMG IN DOWNLOADS OR IN
MAGISK MANAGER FOLDER IN YOUR INTERNAL STORAGE.
5. NOW COPY YOUR PATCHED_BOOT.IMG TO YOUR PC.
NOTE: DO NOT UNINSTALL MAGISK MANAGER AFTER ABOVE PROCESS.
NOW ON PC
1. DOWNLOAD MEDIATEK SCATTER FILE ACCORDING TO YOUR DEVICE CHIPSET. FOR PANASONIC P71 IT IS MT6737M.
2. AFTER DOWNLOADING OPEN SP FLASH TOOL ON YOUR PC AND CLICK ON SCATTER LOADING FILE AND SELECT YOUR DOWNLOADED SCATTER FILE.
3. NOW SELECT BOOT OPTION AND BROWSE YOUR PATCHED_BOOT.IMG
4. NOW POWER OFF YOUR PHONE AND REMOVE YOUR BATTERY AND CONNECT TO YOUR PC.
5. NOW TAP ON DOWNLOAD BUTTON IN SP FLASH TOOL AFTER THAT FLASHING WILL BE DONE JUST WAIT FOR FEW SECONDS. A MESSAGE WILL POP UP CLOSE THE MESSAGE AND DISCONNECT YOUR PHONE.
6. AFTER THIS PUT YOUR BATTERY BACK AND POWER ON YOUR DEVICE.
7. AFTER STARTING ROOT CHECKER APP CHECK YOUR ROOT STATUS BY TAPPING ON VERIFY ROOT.
8. THEN IT WILL ASK PERMISSION OF SUPERUSER GRANT IT AND NOW YOUR PHONE IS ROOTED!!!
ENJOY.
FOR PANASONIC P71 USERS I CAN PROVIDE U THE PATCHED_BOOT.IMG AND SCATTER FILE OF MT6737M,
LINK:
FOR SCATTER FILE:
https://drive.google.com/open?id=1u_j39ob0qG4CiJ3NOqYYD5VI3GNRpNzj
FOR PATCHED BOOT IMAGE
https://drive.google.com/open?id=1ZyohxTuLwbG5eXReTRyoIXC87HoH_ESv
THANK YOU! ENJOY
FOR ANY PROBLEM COMMENT BELOW
Site for firmware of panasonic p71
-> firmwarefile google it