This is a guide on rooting the Alcatel Pop C2 4032A using 2 methods.
Disclaimer: Your warranty is now void. You do this in your own risk. I do not take any responsibility to your device.
How to Root using the Framaroot method:
Enable unknown sources from settings to allow installation of third party apps.
Download latest framaroot.apk version from here .
Install framaroot and click on the Barahir root exploit.
Reboot device and enjoy root .
How to Root using the recovery method
Requirements
SP flash tools
Mtk VCOM drivers (preloader drivers)
ADB driver
USB Cable
Mtk6572 Scatter
Recovery of your choice
SuperSu zip
Android phone of course
Working brain
Download the SP flash tools and Mtk VCOM drivers and extract them to desktop.
Install the Mtk VCOM drivers.
Download the scatter file and place also on the desktop.
Download the SuperSu.zip and place it on the sdcard or internal storage.
Download the recovery of your choice and place it on your desktop
Open the folder with SP flash tools and run flash_tool as administrator
Select the scatter file by clicking on scatter loading
Check the recovery check box and click on location and select the recovery of your choice.
Turn off your phone.
Connect the usb cable to the computer but don't connect the phone as yet.
Click on the download button on the SP flash tool and then connect your phone to the computer.
Wait for it to flash and then reboot into recovery using adb commands once the phone has booted up.
Once the phone is in recovery select install zip from sdcard and locate the SuperSU.zip.
Reboot and there you go root access
To Enable USB Debugging.
1. Go to settings and about phone
2. Tap the build number 7 times to enable development mode.
3. Go back and then go in development mode.
4. Enable USB debugging.
Related
I've decided to open this thread for development md mmx ninja a45 .
Rom dump :
http://www.mediafire.com/?gla8fgpwl0r0hvf
ROOTING (credits:rishu)
pre requisites *a45 drivers and *superoneclick
firstly dissable ur antivirus...
1)download drivers available at micromax's site
2)Connect your device on your PC and be sure that USB Debugging is enabled.
Your PC will ask on how will you install the driver, choose “Install from a specific location” then navigate to where you had downloaded earlier.
3)After drivers has been already installed, open super one click.
4)Click the “Root” button.
Then rooting will start automatically....
Installing CWM: (credits antonysabish)
Micromax A45 Clockworkmod
Recovery
Here's how to get Clockworkmod recovery
with SP Flash Tool:
1. Download SP Flash Tool.
2. Download MT6573_Android_scatter.txt.
3. Download a45recovery-cwm.zip and extract it.
4. Extract SPF Tool.zip and Run
Flash_tool.exe from there.
5. Click File->Open Scatter-loading file and
select the MT6573_Android_scatter.txt you
downloaded.
6. Now uncheck everything except
RECOVERY . Click on recovery and select
a45recovery-cwm.img you downloaded.
7. Now turn off your Micromax A45,
remove battery and put it back( DONT
switch it back on).
8. Press Download in the SP Flash Tool
window, then When the countdown starts,
connect your phone to PC.
9. After it's done, disconnect the phone,
remove battery and put it back. Boot the
phone into Recovery mode, You should
have Clockworkmod v5.8.1.9
download super one click : http://205.196.120.108/ll71hms5t67g/l291ej5damzoujk/SuperOneClickv2.3.3-ShortFuse.rar
Anyone interested please join
cwm for all mtk . via mtkdroid toool
A rooted mtk65xx phone
mtk65xx Drivers
MtkDroidTools (latest preferred)
Original Rom
MTK MobileUncle Tools app (PlayStore)
step 1
you will need to extract the boot.img from the stock rom of your phone.
step 2
connect ur device with usb debugging on .. with usb data cable
step 3
now open adb terminal
and type adb devices
if devices detected go to next step
if devices not detected install adb driver using moboginiee
step 4
Open the root, backup, recovery tab and click on "To choose the boot.img file". Leave all the rest as they are. Then click on Recovery and Boot and select the boot.img we got earlier from the phone's Stock Rom.
step 5
A prompt will appear and there choose YES. A few seconds later, you will see task complete. Go back to the MTKdroidTools folder and you will see a new folder called recovery. Inside, you have two files. Take the one with the word recovery and place it in the root of your phone’s SD card (not in any folder).
From here on we work with the phone.
Open MobileUncle Tools and go to the Recovery Update. You should see the recovery you placed in your SD card. Select it and click on OK.
Finally, choose reboot to Recovery. If all was done correctly, your phone should boot into your new cwm recovery.
if i help u hit thanksssssss
download link in txt file attachment just copy from it and download
Hello again XDA, kirito9 here with another guide on how to root the Alcatel One Touch T'pop. I decided to make a guide because i have not seen any guide on XDA concerning this phone and rooting.
Disclaimer: Your warranty is now void. You do this in your own risk. I do not take any responsibility to your device.
BACKUP YOUR DEVICE BEFORE DOING ANYTHING IN THE EVENT SOMETHING GOES WRONG.
Requirements:
- Windows 7 PC ( tested only on this)
- ADB drivers
- MTK drivers
- MT6575 Scatter file
- CWM or TWRP recovery
- SP Flash Tools
- SuperSU
Lets Begin
Flashing CWM or TWRP
1. First thing to do is to make sure all required drivers are installed. Do that by downloading the Universal ADB driver from this link and install it.
2. Then install the MTK drivers so that SP flash tools can work. Get those here, extract and install the drivers for windows 7.
3. Download your preferred recovery either CWM or TWRP below and place somewhere on your computer where you can find it easily.
4. Download the SP flash tools here and extract them.
5. Download the MT6575 Scatter file attached below.
6. Download the SuperSU zip file and place it either on internal or external of the phone.
6. Go to the sp flash tools folder and run flashtool.exe as administrator.
7. Click on scatter loading and select the MT6575 scatter file you downloaded.
8. Click on the recovery checkbox and then click on the white space in location. Select the recovery of your choice.
9. Turn off the phone, remove the battery then reinsert it.
10. Click on download and then connect the phone.
11. Wait for the flashing to complete then remove your phone.
Rooting the phone.
1. Boot into recovery then go to install, select the SuperSu zip file and install it.
2. After the flashing is complete, reboot your phone and see the SuperSU app in the app drawer
Credits
- me
-Chainfire for his SuperSu
May you also upload any stock ROM for OT-4010D ???
Here is the new easy guide to Root Your A092 Unite..
(By Shantanu Suryawanshi)
Requirements:
1. A092 Windows Drivers..
2. Root Tool Kit.zip
3. Supersu.zip (Root Access.zip)
PROCEDURE:
At the beginning install all the A092 Drivers.
Turn our mobile's USB-DEBUGGING On..
(By going to Setting- Developer Option- USB Debugging.)
Copy Supersu.zip in your sdcard.
Connect the mobile with USB to your Computer & Open Flash all.bat
You are done you have just flashed Philz Touch Recovery.
Then switch off your A092.
Then just go to recovery by holding volume up + power button simultaneously when your A092.
Select Install Zip from sdacrd.
Select Supersu.zip
Reboot system..
You are done you have rooted your A092..
So Enjoy..
I am not responsible if you brick your A092..
Links for Download:
Root kit: https://drive.google.com/file/d/0B7R8HX8LjfZkMy1lNU5Ga1RRWUk/view
Supersu.zip: https://drive.google.com/file/d/0B7R8HX8LjfZkb0RlNGdfZ3JKWUE/view
Root : JB 4.2
Root Micromax A37B
1. Download The Kingroot APK here and install it to your phone.
2. Run King Root application.
3. Click on Root button. It take sometime for the rooting process.
4. Reboot device, done. :good:
Full Instructions here
Stock Rom : JB 4.2
Unbrick your Micromax A37B
1. Download Stock Rom from here (by firmwarefiles.com)and extract it.
2. Download mtk_usb driver from here and install it.
3. Open Sp flash tool, select scatter.txt.
4. Click on download.
5. Power off your device (confirm off), then connect usb cable. (without battery)
6. System will detect your device as mediatek_preloader_com.
7. Sp Tool will recognise your Phone and flashing will start.
8. Once the flashing process is completed, a green ring will appear on your system.
9. Dissconnect, Power On, Done :good:
Full Instructions with images here (by techsultan).
Nandroid Backup/restore (recommended)
Take Full backup of your Micromax A37b
Method 1:
You can do full backup/restore with Custom recovery (Carliv/TWRP).
Method 2:
1. Download Mtkdroid tool here (by gsmhosting)and extract it.
2. Download Pdanet andoid usb driver from here and install it.
3. Install BusyBox.apk in your device from playstore.
4. Enable debugging mode on your phone > Settings > Development. Tap 'android usb debugging' and make sure it's checked.
(if there is no option for development then go to setting > about phone > build number, tap on it 7 times, Go back to Settings menu and now you'll be able to see 01Development there.)
5. Open MTK Droid Tools folder with right-click on 'MTKdroidTools.exe' and Select 'Run as administrator'.
6. Wait several seconds while MTK Droid Tools communicates with your device. give root permission to adb-shell on your device.
7. Click the 'root' button in MTK Droid Tools to get temporary root shell.
8. Now get nvram backup. For full backup go to 2nd tab click on backup.
9. Here will be saved all backup \MtkDroidTools\backups.Done.
Full Instructions with images here (by rajit)
Custom Recovery
(Press Vol up and Power Key to boot in Recovery.)
You can flash it via fastboot.
fastboot flash recovery recovery.img
Click to expand...
Click to collapse
OR
You can flash via SP flashtool.
Ctr recovery for Mmx A37b
Ctr 2.2 here ( by programmer Shekhar.Hardknox)