One Click Root Tool Kit For (Micromax A092 Unite) - Android General

Here is the new easy guide to Root Your A092 Unite..
(By Shantanu Suryawanshi)
Requirements:
1. A092 Windows Drivers..
2. Root Tool Kit.zip
3. Supersu.zip (Root Access.zip)
PROCEDURE:
At the beginning install all the A092 Drivers.
Turn our mobile's USB-DEBUGGING On..
(By going to Setting- Developer Option- USB Debugging.)
Copy Supersu.zip in your sdcard.
Connect the mobile with USB to your Computer & Open Flash all.bat
You are done you have just flashed Philz Touch Recovery.
Then switch off your A092.
Then just go to recovery by holding volume up + power button simultaneously when your A092.
Select Install Zip from sdacrd.
Select Supersu.zip
Reboot system..
You are done you have rooted your A092..
So Enjoy..
I am not responsible if you brick your A092..
Links for Download:
Root kit: https://drive.google.com/file/d/0B7R8HX8LjfZkMy1lNU5Ga1RRWUk/view
Supersu.zip: https://drive.google.com/file/d/0B7R8HX8LjfZkb0RlNGdfZ3JKWUE/view

Related

Micromax a 45 - ALL THINGS ROOT !

I've decided to open this thread for development md mmx ninja a45 .
Rom dump :
http://www.mediafire.com/?gla8fgpwl0r0hvf
ROOTING (credits:rishu)
pre requisites *a45 drivers and *superoneclick
firstly dissable ur antivirus...
1)download drivers available at micromax's site
2)Connect your device on your PC and be sure that USB Debugging is enabled.
Your PC will ask on how will you install the driver, choose “Install from a specific location” then navigate to where you had downloaded earlier.
3)After drivers has been already installed, open super one click.
4)Click the “Root” button.
Then rooting will start automatically....
Installing CWM: (credits antonysabish)
Micromax A45 Clockworkmod
Recovery
Here's how to get Clockworkmod recovery
with SP Flash Tool:
1. Download SP Flash Tool.
2. Download MT6573_Android_scatter.txt.
3. Download a45recovery-cwm.zip and extract it.
4. Extract SPF Tool.zip and Run
Flash_tool.exe from there.
5. Click File->Open Scatter-loading file and
select the MT6573_Android_scatter.txt you
downloaded.
6. Now uncheck everything except
RECOVERY . Click on recovery and select
a45recovery-cwm.img you downloaded.
7. Now turn off your Micromax A45,
remove battery and put it back( DONT
switch it back on).
8. Press Download in the SP Flash Tool
window, then When the countdown starts,
connect your phone to PC.
9. After it's done, disconnect the phone,
remove battery and put it back. Boot the
phone into Recovery mode, You should
have Clockworkmod v5.8.1.9
download super one click : http://205.196.120.108/ll71hms5t67g/l291ej5damzoujk/SuperOneClickv2.3.3-ShortFuse.rar
Anyone interested please join

[ROOT] Guide For Rooting myPhone A818

The credit does not goes to me.
It goes to SuperGuko of symb.ph
You can say thanks to me anyways.
I AM NOT RESPONSIBLE IF YR BLASTS OR WHATEVER HAPPEN
YOUR WARANTY AND BRAIN IS NOW VOID.
What is Rooting and its benefits? —its like jailbreaking but its your Android phone, unlocking the capabilities of your Android device with the apps and tweaks that requires root access to the Android system. Its not necessary but if time came and you realized that you need to root your phone, then it must be it.
What is CWM recovery? – cwm is short for clock work mod recovery. All Android phones have recovery mode already but clock work mode is better and you can do more with CWM, like installing patches, updates, and tweaks on your device.
Rooting myPhone A818
First, you must download these files:
SP Flash Tool — extract once downloaded. This is the app used for flashing an Android phone.
http://www.mediafire.com/?dridzg1tdokf2up
MT65x3 USB VCOM drivers –extract then install. We need these drivers so that the phone will be read by the SP Flash Tool once connected to the PC.
http://www.mediafire.com/?9wi60a5dtst2aw6
CWM based Recovery –this is the working CWM recovery (recovery.img) for the myPhone A818
http://www.mediafire.com/?jt482l02ls8kl4h
MT6573_Android_scatter.txt –we need this scatter text file.
http://www.mediafire.com/view/?tkizuj24vntmt9r
Root A818 –update file for rooting the A818.
http://www.mediafire.com/?kmbkj29lccsaili
Steps
Once the drivers are properly installed and the SP Flash Tool is already extracted and accessible, turn off your myPhone A818 and remove its battery.
Run SP Flash Tool.
Click the Scatter-loading button and navigate to the downloaded MT6573_Android_scatter.txt file.
Be sure that the RECOVERY is the only one selected, click on it and browse on the downloaded recoveryNonTouch.img file.
Click the Download button and just ignore the warnings.
Attach the battery again and connect the phone, be sure not to turn it on yet.
Wait for the process to complete. You will see a Green Circle with a label saying download okay. Normally, this process doesnt takes too much time and not more than 5 minutes as you were just writing a small-size recovery.img file.
How to enter into CWM recovery
Be sure that your phone is turned off.
Press Volume up + Volume down and power button until a set of choices appears then just press the up button to enter recovery.
With the CWM recovery, you can easily make a full back-up of your phone. This is as well called as Nandroid back-up. Just be sure you have enough storage on your SD card. Just select Select backup and restore, then choose back up and wait for it to finish.
How to root myPhone A818
Copy the RootA818.zip file on your SD card.
Enter CWM recovery.
Select install zip from sdcard, choose zip from sdcard, then locate RootA818.zip.
Select Reboot system now.
To know verify if the rooting process is a success, look for the SuperUser app in your drawer, or just check root access with the Root Checker app from the PlayStore.
Enjoy!
REFERENCE: http://www.symbianize.com/showthread.php?t=851383

[ROOT] Rooting Method for Alcatel Pop C2 4032A

This is a guide on rooting the Alcatel Pop C2 4032A using 2 methods.
Disclaimer: Your warranty is now void. You do this in your own risk. I do not take any responsibility to your device.
How to Root using the Framaroot method:
Enable unknown sources from settings to allow installation of third party apps.
Download latest framaroot.apk version from here .
Install framaroot and click on the Barahir root exploit.
Reboot device and enjoy root .
How to Root using the recovery method
Requirements
SP flash tools
Mtk VCOM drivers (preloader drivers)
ADB driver
USB Cable
Mtk6572 Scatter
Recovery of your choice
SuperSu zip
Android phone of course
Working brain
Download the SP flash tools and Mtk VCOM drivers and extract them to desktop.
Install the Mtk VCOM drivers.
Download the scatter file and place also on the desktop.
Download the SuperSu.zip and place it on the sdcard or internal storage.
Download the recovery of your choice and place it on your desktop
Open the folder with SP flash tools and run flash_tool as administrator
Select the scatter file by clicking on scatter loading
Check the recovery check box and click on location and select the recovery of your choice.
Turn off your phone.
Connect the usb cable to the computer but don't connect the phone as yet.
Click on the download button on the SP flash tool and then connect your phone to the computer.
Wait for it to flash and then reboot into recovery using adb commands once the phone has booted up.
Once the phone is in recovery select install zip from sdcard and locate the SuperSU.zip.
Reboot and there you go root access
To Enable USB Debugging.
1. Go to settings and about phone
2. Tap the build number 7 times to enable development mode.
3. Go back and then go in development mode.
4. Enable USB debugging.

[ROOT][RECOVERY][ROM] Micromax A37b

Root : JB 4.2
Root Micromax A37B
1. Download The Kingroot APK here and install it to your phone.
2. Run King Root application.
3. Click on Root button. It take sometime for the rooting process.
4. Reboot device, done. :good:
Full Instructions here
Stock Rom : JB 4.2
Unbrick your Micromax A37B
1. Download Stock Rom from here (by firmwarefiles.com)and extract it.
2. Download mtk_usb driver from here and install it.
3. Open Sp flash tool, select scatter.txt.
4. Click on download.
5. Power off your device (confirm off), then connect usb cable. (without battery)
6. System will detect your device as mediatek_preloader_com.
7. Sp Tool will recognise your Phone and flashing will start.
8. Once the flashing process is completed, a green ring will appear on your system.
9. Dissconnect, Power On, Done :good:
Full Instructions with images here (by techsultan).
Nandroid Backup/restore (recommended)
Take Full backup of your Micromax A37b
Method 1:
You can do full backup/restore with Custom recovery (Carliv/TWRP).
Method 2:
1. Download Mtkdroid tool here (by gsmhosting)and extract it.
2. Download Pdanet andoid usb driver from here and install it.
3. Install BusyBox.apk in your device from playstore.
4. Enable debugging mode on your phone > Settings > Development. Tap 'android usb debugging' and make sure it's checked.
(if there is no option for development then go to setting > about phone > build number, tap on it 7 times, Go back to Settings menu and now you'll be able to see 01Development there.)
5. Open MTK Droid Tools folder with right-click on 'MTKdroidTools.exe' and Select 'Run as administrator'.
6. Wait several seconds while MTK Droid Tools communicates with your device. give root permission to adb-shell on your device.
7. Click the 'root' button in MTK Droid Tools to get temporary root shell.
8. Now get nvram backup. For full backup go to 2nd tab click on backup.
9. Here will be saved all backup \MtkDroidTools\backups.Done.
Full Instructions with images here (by rajit)
Custom Recovery
(Press Vol up and Power Key to boot in Recovery.)
You can flash it via fastboot.
fastboot flash recovery recovery.img
Click to expand...
Click to collapse
OR
You can flash via SP flashtool.
Ctr recovery for Mmx A37b
Ctr 2.2 here ( by programmer Shekhar.Hardknox)

Install TWRP & Root Your Symphony i50

Requirements For Root Symphony i50:
1. Windows PC
2. Mobile
3. installment of usb/vcom drivers
4. SuperSU
Disclaimer:
I am not responsible for bricked devices.
I will not give support, if you did not follow flash instructions 'word by word'.
Click to expand...
Click to collapse
Download Require Files - Here>>
And Extract
Step 1 : First install the vcom & usb drivers
Step 2: Copy "SuperSU.zip" in your phone memory.
Step 2 : Now open sp flash tools & select scatter file "MT6580_Android_scatter.txt" with recovery.img.
Step 3 : Remove battery From Phone, Click "Download" on sp flash tool & Connect USB With Cable with PC,
Wait till Successfull.
Step 4 : Now connect battery & press on Vollum Up key and power key at same time.
Step 5 : Press on install button and Select "SuperSU.zip"
Step 6: Now Swipe on install Button.
Step 7 : After successfully instaling supersu, reboot the system.
A Video example (its for i10) - https://www.youtube.com/watch?v=A-hbCWRHaYw&feature=youtu.be
Hit Thanks if you success.
It worked now my i50 is rooted now but i need a cm14 custom rom for it can you help? Please
I need a Symphony i18 twrp or root
Place help us
Need CWM recovery zip file for Symphony Z15
My device name is Symphony Z15 I need CWM recovery zip file,plz help.

Categories

Resources