Database Info

CWM recovery for Micromax a115 CANVAS 3D

MICROMAX A115 CANVAS 3D complete development here
The mobile has released today itself but got root as well as CWM Now this is the first tutorial on internet.
Note : If any one will copy this tutorial in their blogs or website please give a link to this website please.
How to root micromax a115 CANVAS 3D click here
Method 1 : Root required Very easy
1. Download CWM recovery.img and recovery manager from HEREhttp://d-h.st/6AP now Copy CWM recovery.img in SD card keep in root of sd card not in any folder, now install the recovery manager.apk normally
3. Now open the recovery manager app
4. Click on recovery in app menu.
5. There click on install recoveryD
D COM
6. Then click on the recovery image name of ‘recovery.img’
7. Let the app install the recovery. after it done a message will show.
current recovery : unrecognized…. just ignore it.
That’s all now you have installed your CWM recovery
Quote
SP Flash Tool method, root not required
1. Download MTK6577 Drivers.zip and unzip/extract on
your Windows PC, just run InstallDriver.exe to install
drivers.
2. Download CWMR 6.0.2.8 + scatter.zip and SP_Flash_Tool unzip/extract them.
3. Now open extracted SP Flash Tool folder and run Flash_tool.exe
4. Click on "Scatter-loading" button which is on the right side below Downloading
Agent. A new window will open.
Browse to the extractedCWMR 6.0.2.8 + scatter folder and select
MT6577_Android_scatter_emmc.txt file.
5. Flash tool will populate the Map file on the application window. You will see
multiple entries. Uncheck all entries
except for RECOVERY.
6. Now click on "Download". Warning message will occur, but ignore that and click Yes.
7. You will see in the status bar below "Searching", now connect your phone (with
battery inserted + Press and Hold
Volume Up Key) via the USB cable.
8. Wait for the process to finish and then you will get a window showing green circle.
Congrats You have flashed CWMR !
Note: If you get any error in SP Flash Tool, then recheck your MTK drivers installation or manually install them through device manager.​

reserved

please attach cwm for a115 ...attach in this message as soon as possible

Android 4.2.2
Hey I want android 4.2.2 for canvas 3d can u help me

download mode problem
i did'nt get download mode in my celkon a115 mobile

[GUIDE] [ROOT] Alcatel One Touch T' Pop

Hello again XDA, kirito9 here with another guide on how to root the Alcatel One Touch T'pop. I decided to make a guide because i have not seen any guide on XDA concerning this phone and rooting.
Disclaimer: Your warranty is now void. You do this in your own risk. I do not take any responsibility to your device.
BACKUP YOUR DEVICE BEFORE DOING ANYTHING IN THE EVENT SOMETHING GOES WRONG.
Requirements:
- Windows 7 PC ( tested only on this)
- ADB drivers
- MTK drivers
- MT6575 Scatter file
- CWM or TWRP recovery
- SP Flash Tools
- SuperSU
Lets Begin
Flashing CWM or TWRP
1. First thing to do is to make sure all required drivers are installed. Do that by downloading the Universal ADB driver from this link and install it.
2. Then install the MTK drivers so that SP flash tools can work. Get those here, extract and install the drivers for windows 7.
3. Download your preferred recovery either CWM or TWRP below and place somewhere on your computer where you can find it easily.
4. Download the SP flash tools here and extract them.
5. Download the MT6575 Scatter file attached below.
6. Download the SuperSU zip file and place it either on internal or external of the phone.
6. Go to the sp flash tools folder and run flashtool.exe as administrator.
7. Click on scatter loading and select the MT6575 scatter file you downloaded.
8. Click on the recovery checkbox and then click on the white space in location. Select the recovery of your choice.
9. Turn off the phone, remove the battery then reinsert it.
10. Click on download and then connect the phone.
11. Wait for the flashing to complete then remove your phone.
Rooting the phone.
1. Boot into recovery then go to install, select the SuperSu zip file and install it.
2. After the flashing is complete, reboot your phone and see the SuperSU app in the app drawer
Credits
- me
-Chainfire for his SuperSu

May you also upload any stock ROM for OT-4010D ???

[ROOT][RECOVERY][ROM] LAVA iris 300 style

Root : JB 4.2
Root LAVA iris 300
1. Download The Framaroot APK here and install it to your phone.
2. Goto Settings > Security > and tick “Unknown Sources“.
3. Run Framaroot, choose Superuser or SuperSU.
4. Select Boromir or Bahamir.
5. You will see Success.
6. Reboot device, Done. :good:
OR
1. Download The Kingoroot APK here and install it to your phone.
2. Run King Root application.
3. Click on Root button. It take sometime for the rooting process.
4. Reboot device, done. :good:
Stock Rom : JB 4.2
Unbrick your LAVA iris 300
1. Download Stock Rom from here (by xdafirmware)and extract it.
2. Download mtk_usb driver from here and install it.
3. Open Sp flash tool, select scatter.txt.
4. Click on download.
5. Power off your device (confirm off), then connect usb cable. (dnt press any key, flash with battery).
6. System will detect your device as mediatek_preloader_com.
7. Sp Tool will recognise your Phone and flashing will start.
8. Once the flashing process is completed, a green ring will appear on your system.
9. Dissconnect, Power On, Done :good:
Full Instructions with images here (by techsultan).
Nandroid Backup/restore (recommended)
Take Full backup of your LAVA iris 300
You can take full backup with Custom recovery (Carliv/TWRP).
OR
1. Download Mtkdroid tool here (by gsmhosting)and extract it.
2. Download Pdanet+ andoid usb driver from here and install it.
3. Install BusyBox.apk in your device from playstore.
4. Enable debugging mode on your phone > Settings > Development. Tap 'android usb debugging' and make sure it's checked.
(if there is no option for development then go to setting > about phone > build number, tap on it 7 times, Go back to Settings menu and now you'll be able to see “Developer options” there.)
5. Open MTK Droid Tools folder with right-click on 'MTKdroidTools.exe' and Select 'Run as administrator'.
6. Wait several seconds while MTK Droid Tools communicates with your device. give root permission to adb-shell on your device.
7. Click the 'root' button in MTK Droid Tools to get temporary root shell.
8. Now get nvram backup. For full backup go to 2nd tab click on backup.
9. Here will be saved all backup \MtkDroidTools\backups.
10. Prepare this backup to make it flashable through SP Flash Tool. To do it, click on To 'prepare blocks for Flash Tool.'
11. A new windows will appear asking for a .md5 file of the backup. So navigate to the MTK Droid Tools folder where your backup is found. Open the backup that your have created earlier and select the files.md5 click open.
12. Wait for MTK Droid Tools to copy the files for SP Flash Tool, check the status messages until the copying/task is complete. Done
Full Instructions with images here (by rajit).
Restore :
1. Open , SP Flash Tool.exe run as administrator. Load the scatter file (click scatter-loading) which you have prepared from MTK Droid Tools to be flashable through SP Flash Tool.
2. After you loaded scatter file, All must checked except for Cache and USERDATA and most importantly, do not check DSP_BL or Preloader else you'll brick it.
3. To restore device, click Download from SP Flash Tool, a prompt will appear, just click Yes. Immediately connect your Power OFF device to your computer via USB .
4. Wait for the tool to detect your device and restore the Stock ROM that you have made. An alert with a green circle appears after successfully downloading the restore.
Full Instructions with images here (by MTK Hacker Pro).
Custom Recovery : TWRP/CTR
( Download and flash it with Sp FLash tool. Press Vol up and Power Key to boot in Recovery. )
Twrp for LAVA iris 300
TWRP2.8.0 alpha here
Note : There is lots of bug in it. pls post here.
CTR for LAVA iris 300
Carliv 2.4 alpha here
Note : Flipped Screen Bug.

wahh! Now just make a best kitkat rom for 300 plz!! ur gr8

[ROOT][RECOVERY][ROM] Micromax A37b

Root : JB 4.2
Root Micromax A37B
1. Download The Kingroot APK here and install it to your phone.
2. Run King Root application.
3. Click on Root button. It take sometime for the rooting process.
4. Reboot device, done. :good:
Full Instructions here
Stock Rom : JB 4.2
Unbrick your Micromax A37B
1. Download Stock Rom from here (by firmwarefiles.com)and extract it.
2. Download mtk_usb driver from here and install it.
3. Open Sp flash tool, select scatter.txt.
4. Click on download.
5. Power off your device (confirm off), then connect usb cable. (without battery)
6. System will detect your device as mediatek_preloader_com.
7. Sp Tool will recognise your Phone and flashing will start.
8. Once the flashing process is completed, a green ring will appear on your system.
9. Dissconnect, Power On, Done :good:
Full Instructions with images here (by techsultan).
Nandroid Backup/restore (recommended)
Take Full backup of your Micromax A37b
Method 1:
You can do full backup/restore with Custom recovery (Carliv/TWRP).
Method 2:
1. Download Mtkdroid tool here (by gsmhosting)and extract it.
2. Download Pdanet andoid usb driver from here and install it.
3. Install BusyBox.apk in your device from playstore.
4. Enable debugging mode on your phone > Settings > Development. Tap 'android usb debugging' and make sure it's checked.
(if there is no option for development then go to setting > about phone > build number, tap on it 7 times, Go back to Settings menu and now you'll be able to see 01Development there.)
5. Open MTK Droid Tools folder with right-click on 'MTKdroidTools.exe' and Select 'Run as administrator'.
6. Wait several seconds while MTK Droid Tools communicates with your device. give root permission to adb-shell on your device.
7. Click the 'root' button in MTK Droid Tools to get temporary root shell.
8. Now get nvram backup. For full backup go to 2nd tab click on backup.
9. Here will be saved all backup \MtkDroidTools\backups.Done.
Full Instructions with images here (by rajit)
Custom Recovery
(Press Vol up and Power Key to boot in Recovery.)
You can flash it via fastboot.
fastboot flash recovery recovery.img
Click to expand...
Click to collapse
OR
You can flash via SP flashtool.
Ctr recovery for Mmx A37b
Ctr 2.2 here ( by programmer Shekhar.Hardknox)

Qmobile x35 Custom Recovery

IFlash carliv recovery to Qmobile x35 and replace your stock recovery.
I have ported carliv recovery to qmobile x35 after modifications to use only on qmobile 35 using Carliv's porting guide so don't use on any other device.
First of all make backup of your full rom using mtkdroid tools.
Follow the procedure to flash recovery to your Qmobile x35.
1. Download the recovery_carliv.img and mt6572.txt scatter files attached below.
Rename recovery_carliv.img to recovery.img
2. Download SPflash tool. As the fastboot utility does not work in this device so only use SPflash tool. And download Mtk preloader drivers.
3. Open SPflash tool and go to download tab and then click scatter file to choose scatter file that u downloaded from here. It will load the scatter file in download tab.
4. Now only tick the recovery checkbox and then move your mouse in the same line towards last column and click it.
It will open window to select the recovery file u want to flash.
5. Now select the downloaded recovery.img and press open.
6. Now turn your mobile off and put out the battery
7. Now click download in spflash tools download tab to start flashing.
8. Now plug your data cable to your pc and your fone. It will start downloading.
9. When a green circle appers on your pc screen it means it finished flashing.
10. Now disconnect your data cable from pc and put your battery back to your fone.
11. Now press power button + volume up botton together untill qmobile logo appears and then release the power button but dont release volume up botton untill recovery starts on your fone.
Thats all.
Now do what u want
Credits to Carliv for his files.