IFlash carliv recovery to Qmobile x35 and replace your stock recovery.
I have ported carliv recovery to qmobile x35 after modifications to use only on qmobile 35 using Carliv's porting guide so don't use on any other device.
First of all make backup of your full rom using mtkdroid tools.
Follow the procedure to flash recovery to your Qmobile x35.
1. Download the recovery_carliv.img and mt6572.txt scatter files attached below.
Rename recovery_carliv.img to recovery.img
2. Download SPflash tool. As the fastboot utility does not work in this device so only use SPflash tool. And download Mtk preloader drivers.
3. Open SPflash tool and go to download tab and then click scatter file to choose scatter file that u downloaded from here. It will load the scatter file in download tab.
4. Now only tick the recovery checkbox and then move your mouse in the same line towards last column and click it.
It will open window to select the recovery file u want to flash.
5. Now select the downloaded recovery.img and press open.
6. Now turn your mobile off and put out the battery
7. Now click download in spflash tools download tab to start flashing.
8. Now plug your data cable to your pc and your fone. It will start downloading.
9. When a green circle appers on your pc screen it means it finished flashing.
10. Now disconnect your data cable from pc and put your battery back to your fone.
11. Now press power button + volume up botton together untill qmobile logo appears and then release the power button but dont release volume up botton untill recovery starts on your fone.
Thats all.
Now do what u want
Credits to Carliv for his files.
Related
I've decided to open this thread for development md mmx ninja a45 .
Rom dump :
http://www.mediafire.com/?gla8fgpwl0r0hvf
ROOTING (credits:rishu)
pre requisites *a45 drivers and *superoneclick
firstly dissable ur antivirus...
1)download drivers available at micromax's site
2)Connect your device on your PC and be sure that USB Debugging is enabled.
Your PC will ask on how will you install the driver, choose “Install from a specific location” then navigate to where you had downloaded earlier.
3)After drivers has been already installed, open super one click.
4)Click the “Root” button.
Then rooting will start automatically....
Installing CWM: (credits antonysabish)
Micromax A45 Clockworkmod
Recovery
Here's how to get Clockworkmod recovery
with SP Flash Tool:
1. Download SP Flash Tool.
2. Download MT6573_Android_scatter.txt.
3. Download a45recovery-cwm.zip and extract it.
4. Extract SPF Tool.zip and Run
Flash_tool.exe from there.
5. Click File->Open Scatter-loading file and
select the MT6573_Android_scatter.txt you
downloaded.
6. Now uncheck everything except
RECOVERY . Click on recovery and select
a45recovery-cwm.img you downloaded.
7. Now turn off your Micromax A45,
remove battery and put it back( DONT
switch it back on).
8. Press Download in the SP Flash Tool
window, then When the countdown starts,
connect your phone to PC.
9. After it's done, disconnect the phone,
remove battery and put it back. Boot the
phone into Recovery mode, You should
have Clockworkmod v5.8.1.9
download super one click : http://205.196.120.108/ll71hms5t67g/l291ej5damzoujk/SuperOneClickv2.3.3-ShortFuse.rar
Anyone interested please join
MICROMAX A115 CANVAS 3D complete development here
The mobile has released today itself but got root as well as CWM Now this is the first tutorial on internet.
Note : If any one will copy this tutorial in their blogs or website please give a link to this website please.
How to root micromax a115 CANVAS 3D click here
Method 1 : Root required Very easy
1. Download CWM recovery.img and recovery manager from HEREhttp://d-h.st/6AP now Copy CWM recovery.img in SD card keep in root of sd card not in any folder, now install the recovery manager.apk normally
3. Now open the recovery manager app
4. Click on recovery in app menu.
5. There click on install recoveryD
D COM
6. Then click on the recovery image name of ‘recovery.img’
7. Let the app install the recovery. after it done a message will show.
current recovery : unrecognized…. just ignore it.
That’s all now you have installed your CWM recovery
Quote
SP Flash Tool method, root not required
1. Download MTK6577 Drivers.zip and unzip/extract on
your Windows PC, just run InstallDriver.exe to install
drivers.
2. Download CWMR 6.0.2.8 + scatter.zip and SP_Flash_Tool unzip/extract them.
3. Now open extracted SP Flash Tool folder and run Flash_tool.exe
4. Click on "Scatter-loading" button which is on the right side below Downloading
Agent. A new window will open.
Browse to the extractedCWMR 6.0.2.8 + scatter folder and select
MT6577_Android_scatter_emmc.txt file.
5. Flash tool will populate the Map file on the application window. You will see
multiple entries. Uncheck all entries
except for RECOVERY.
6. Now click on "Download". Warning message will occur, but ignore that and click Yes.
7. You will see in the status bar below "Searching", now connect your phone (with
battery inserted + Press and Hold
Volume Up Key) via the USB cable.
8. Wait for the process to finish and then you will get a window showing green circle.
Congrats You have flashed CWMR !
Note: If you get any error in SP Flash Tool, then recheck your MTK drivers installation or manually install them through device manager.
reserved
please attach cwm for a115 ...attach in this message as soon as possible
Android 4.2.2
Hey I want android 4.2.2 for canvas 3d can u help me
download mode problem
i did'nt get download mode in my celkon a115 mobile
Presenting CWM recovery for Micromax Viva A72 and the steps for Rooting Micromax Viva A72.
Downloads
Recovery and scatter file
https://www.mediafire.com/?4zfa8z1zfw7dob5
Mtkdroid Tool
http://www.mediafire.com/download/zs9m5il96ywriwc/MtkDroidTools.rar
SPFlash Tool V3
http://www.mediafire.com/download/wjusbvd3b9e6q4g/SP_Flash_Tool_v3.rar
Driver
http://www.mediafire.com/download/zcahcuwex0vamam/MT6577%20USB%20VCOM%20drivers.7z
Click to expand...
Click to collapse
First we need to flash CWM Recovery using the SPFlash Tool.
0. Install driver on pc before doing any thing.
1. Extract recovery and scatter file in the same folder on desktop.
2. Start SPFlash Tool and select scatter file from the extracted folder.
[Note in SPFlash Tool only recovery option should be selected.]
3. Shutdown the phone and remove battery.
4. In SPFlash Tool click on Download button and then connect you phone, wait for a few sec and then you'll see the green which means CWM recovery has been flashed.
Second Rooting Micromax Viva A72
1. Download Supersu flashable zip to the sdcard of you phone.
2. Download Mtkdroid tool and extract it on pc.
3. Connect you phone to pc. (Note - debugging option should be selected before connecting phone to pc)
4. Open extracted folder and navigate to adb folder, here press Shift+Ctrt+right click of mouse now select "Open command Prompt here".
3. In the command prompt enter following command without quote "adb device" and then "adb reboot recovery", wait for a few secs. you phone will reboot to recovery.
4. flash supersu zip through CWM Recovery and reboot.
You have successfully Rooted your Micromax Viva A72 and installed CWM Recovery.:good:
CREDITS
1. rua1 for Mtkdroid Tool.
2. Me for creating recovery and testing
3. SPFlash Tool creator (I don't Know the name of the developer)
Disclaimer
I have tested this on 2 Phone without any problem.
Use it on your own RISK.
I or any other should not be held responsible for any damage to your phone, to you or to your brain
Click to expand...
Click to collapse
Today I am sharing how to root MMX A110 using sp flash tools
First you need some things download below
1) CWM recovery
http://d-h.st/Ky2
Thnxx @suhas.holls
2) MMX A110 Drivers
http://www.mediafire.com/?5ai8nwihmp30grw
3) VCOM drivers
http://www.mediafire.com/?3wec990b42j3nn7
4) SP flash tools
http://www.mediafire.com/?b111ivr9it76cma
5) Supersu.zip
http://www.mediafire.com/?i1y443she8hlby6
6) MT6577 scatter file
http://www.mediafire.com/?2cp7i70khi8fe84
Now after downloading all things
1)Install The drivers in your PC or lappy whatever, window xp or 7 should be used.
2)Now first copy supersu.zip into root(out of every folder)of your phone's SD card
3) Now in developers option tick USB Debugging
4) Switch off the phone remove then replace battery and connect it to PC now your PC will install MTK preloaders.
5) Now remove data cable and don't turn on the phone, if its turned on itself then turn it off
6) Now open sp flash tools folder and open spflashtools.exe , search for the option "Scatter-Loading" and click on it and locate the scatter file you downloaded.
7) A list will appear then untick all except"Recovery"
8) Click on recovery and locate the cwm recovery you downloaded.
9) After selecting recovery insert data cable in PC and not in phone only connect one side i.e. to the PC.
10)Now click on download button and a countdown will start in the lower progress bar then connect your phone (in switched off state) Then a yellow bar and a green bar will appear and after that a green ring will appear saying "Download OK".
Your phone's recovery is now cwm.
11) Now remove phone and press Volume up volume down power key simultaneously and a mode will appear with two option recovery mode and factory mode.
12) Using volume up choose recovery mode and press power key.
13) then choose again recovery mode and press volume down key.
14) Now choose Install a zip from SD card and select"supersu.zip"And after installing it reboot your phone.
After rebooting you will find an app named Supersu
Hurray Your phone is rooted and now it has endless things to do.
Remember- Rooting void your phone's warranty
If you liked my work, please Hit thanks button it will motivate me and won't cost you.
Important
avinash130413 said:
Today I am sharing how to root MMX A110 using so flash
I am not responsible if anything happens to your phone, do at your own risk..
Click to expand...
Click to collapse
Hello Guyz,
As no Dev. Has been made a recovery for a12* at last after lots of efforts...
I developed A Recovery For Our Devices
A waiting is over
Introducing All new
"Philz Recovery" Only By me for
Karbonn A12*(Star)
link for recovery: https://drive.google.com/file/d/0BxQZF8lqd-BHaE8yRGtUekI0Snc/view
Software to flash recovery : https://github.com/DsLNeXuS/Rashr/...aad14/RashrApp/RashrApp-release.apk?raw=true
Known issues : Touch not working properly but u can use volume keys to move up and down and power key for selection...
Every thing else working well if u find any issue than u can comment below or message me on fb..
How to disable touch on recovery :
Just boot into recovery... select Recovery setting and then go to Gui setting and disable touch....
Now will discuss how to flash recovery
Steps:-
There Are 2 wayz to install this recovery...
I. INSTALLATION WITHOUT PC
1: download mobileuncletool or flashify from playstore or link given by me.
2: open mobileuncletool or flashify n click on update recovery n wait for completion.
3: After completion boot into recovery mode..
II. INSTALLATION WITH PC
1: Download spflash tool for pc n download scatter file for MT6572 devices n install all mtk drivers on pc.
2: Open spflash tool n load the scatter file that u have downloaded above.
3: Tick on recovery n then select recovery.img n click on download.
4: Now plug usb with ur pc n connect phone without battery n then connect usb cable with phone and insert the battery.
5: Installation process will start automatically n wait for completion..
THIS IS MY SECOND WORK FOR KARBONN A12*
ENJOY CWM BASED RECOVERY
Join my grp on Facebook
Karbonn Smart A12 Star Official
(Development & Discussion) https://m.facebook.com/groups/718681911514380?refid=18&__tn__=C
Hit thanks to appreciate my work... :thumbup:
Recovery for K12*
thanku bro....
Installation with mobileuncle tool
Ui of PhilZ recovery