I've ported Lenovo a1000 cwm recovery to Starmobile Play boost!
link: below
JUST RENAME IT WITH "recovery.img" without quotes!
NOTE: THE CWM RECOVERY IS NOT FULLY PORTED.. (PROBLEMS IN LOGGING) you cant see the progress of
flashing fully but it works!
ROOT GUIDE:
TO ROOT STARMOBILE PLAY BOOST.. FLASH THE SUPERSU ZIP ROOT USING CWM RECOVERY I PROVIDED!
(it works! VERIFIED BY ME)
Link for supersu: below
METHOD FOR FLASHING THE RECOVERY:
MY METHOD IS INVOLVING WIPING DATA.. YOU CAN USE YOUR'E OWN METHOD BUT THIS IS THE METHOD I USE TO FLASH THE RECOVERY TO MY PHONE
INSTALL SPREADTRUM DRIVERS, LINK: below
INSTALLING SPREADTRUM DRIVERS NEEDED DISABLED DRIVER SIGNATURE ENFORCEMENT... LINK FOR DISABLING IT: below
SPREADTRUM UPDATE UTILITY:below
STARMOBILE PLAY BOOST STOCK ROM: below
STEPS FOR FLASHING: INVOLVES DATA WIPING!!!!
STEP 1: INSTALL SPREADTRUM DRIVERS: GUIDE:
STEP 2: EXTRACT THE STOCK ROM (.PAC) FILE AND THE UPGRADE UTILITY IN ONE FOLDER
STEP 3: OPEN THE "UpgradedDownload.exe" PROGRAM
STEP 4: PRESS THE SINGLE COG LOGO (OPEN PACKET FILE) AND LOCATE THE STOCK ROM .PAC TO THE SAME FOLDER
STEP 5: WAIT THE UTILITY TO EXTRACT THE FILES
STEP 6: AFTER THE FILES EXTRACTED, GO TO THE DIRECTORY OF THE UTILITY, YOU WILL SEE "ImageFiles" FOLDER, OPEN IT
STEP 7: YOU WILL SEE A FOLDER THERE NAMED "_DownloadFiles*******", OPEN IT!
STEP 8: ONCE YOU ARE THERE, DELETE THE EXISTING STOCK "recovery.img" THERE AND REPLACE IT WITH THE CWM THAT I PROVIDE "rename it with recovery.img"
STEP 9: GO BACK TO THE UTILITY AND PRESS THE PLAY BUTTON
STEP 10: TO START THE DOWNLOAD PROCESS:
TURN OFF YOUR'E DEVICE
MAKE SURE YOU INSTALLED THE SPREADTRUM DRIVERS CORRECTLY!
REMOVE THE BATTERIES
PUT THE BATTERIES BACK
PRESS VOL UP + POWER BUTTON WHILE PLUGGING THE USB CABLE
IT WILL START THE PROCESS
STEP 11: WAIT THE UTILITY TO STATE "passed" AND YOUR'E GOOD TO GO! "WIPED DATA + CWM RECOVERY INSTALLED!"
EXTRAS: ADB DRIVERS: below
GLAD TO HELP SOMEONE! to acquire links go to pastebin and /AGNYFQ62
Help!!!
Most of the links are expired or can't be found.....
TweakBox04 said:
Most of the links are expired or can't be found.....
Click to expand...
Click to collapse
email me here > [email protected]
TweakBox04 said:
Most of the links are expired or can't be found.....
Click to expand...
Click to collapse
yes it's impossible to find them
recovery img dropbox. com/s/83777cy ayia8ti3/STARM OBILE %20RECOV% 20CWM .img?dl=0
supersu root zip drop box .com/s/qfhl78 bifwawj3f/supe rsu-flashable- root.zip?dl=0
spreadtrum driver dropbox. com/ s/go1r5 xylh6ghmj k/android_spreadt rum_driver. zip?dl=0
disable driver signature enforcement guide packard-bell-scandic.cus thelp. com/app/answers/detail /a_id/38288/~/windows -10%3A-disable-signed-driver- enforcement
spreadtrum utility drop box. com / s/7nemx01hd0c u30u/SPD_ Upgrade_Tool_R17 .0.0001.zip?dl=0
stock rom needrom. com /download /starmobile-play- boost/
guide install spreadtrum drivers android mtk. com/ install-spreadtrum- usb-driver-manually
adb drivers dropbox.
com/ s/kwddnc xu000ue7 8/adb-setup-1. 4.3.exe?dl=0[
urls are not allowed to post sorry.
Related
Hello again XDA, kirito9 here with another guide on how to root the Alcatel One Touch T'pop. I decided to make a guide because i have not seen any guide on XDA concerning this phone and rooting.
Disclaimer: Your warranty is now void. You do this in your own risk. I do not take any responsibility to your device.
BACKUP YOUR DEVICE BEFORE DOING ANYTHING IN THE EVENT SOMETHING GOES WRONG.
Requirements:
- Windows 7 PC ( tested only on this)
- ADB drivers
- MTK drivers
- MT6575 Scatter file
- CWM or TWRP recovery
- SP Flash Tools
- SuperSU
Lets Begin
Flashing CWM or TWRP
1. First thing to do is to make sure all required drivers are installed. Do that by downloading the Universal ADB driver from this link and install it.
2. Then install the MTK drivers so that SP flash tools can work. Get those here, extract and install the drivers for windows 7.
3. Download your preferred recovery either CWM or TWRP below and place somewhere on your computer where you can find it easily.
4. Download the SP flash tools here and extract them.
5. Download the MT6575 Scatter file attached below.
6. Download the SuperSU zip file and place it either on internal or external of the phone.
6. Go to the sp flash tools folder and run flashtool.exe as administrator.
7. Click on scatter loading and select the MT6575 scatter file you downloaded.
8. Click on the recovery checkbox and then click on the white space in location. Select the recovery of your choice.
9. Turn off the phone, remove the battery then reinsert it.
10. Click on download and then connect the phone.
11. Wait for the flashing to complete then remove your phone.
Rooting the phone.
1. Boot into recovery then go to install, select the SuperSu zip file and install it.
2. After the flashing is complete, reboot your phone and see the SuperSU app in the app drawer
Credits
- me
-Chainfire for his SuperSu
May you also upload any stock ROM for OT-4010D ???
Below is the direct link to download the Gionee F103 Stock Firmware (flash file) from GoogleDrive. Firmware contains Flash Tool, Driver and instructions.
Gionee_F103_0203_T5293.zip
" https://docs.google.com/uc?id=0Bxbxl3u2_t15U2dTbnhYODRaNlk "
Gionee_F103_0203_T5346.zip
" https://docs.google.com/uc?id=0Bxbxl3u2_t15dE9sbXU3NV8zRU0 "
Gionee_F103_0203_T5616.zip
" https://docs.google.com/uc?id=0B3MWIAQ-re4KQ1hLZHFOUWRqd0k "
How to Flash
Step 1: Download and extract the stock firmware on your computer.
Step 2: After extracting you will find the SP Flash Tool, Driver and instruction manual.
Step 3: Install the USB Drivers (skip if drivers are already installed).
Step 4: Open the SP Flash Tool and load the Scatter File from the firmware folder.
Step 5: Connect your Smartphone to the computer using the USB Driver.
Step 6: Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing.
Step 7: Green Ring will appear at the end of successful Flash.
Important Notes:
[*] Take a Backup of your personal data before flashing or installing the firmware on your smartphone. As this helps you to recover the personal data whenever any thing wrong happens.
Hi,
Information like this for Android devices with no dedicated section would go here,
http://forum.xda-developers.com/android/general
XDA Assist is here to help members navigate the site , not for guides.
Thanks! I'll close this thread.
Requirements For Root Symphony i50:
1. Windows PC
2. Mobile
3. installment of usb/vcom drivers
4. SuperSU
Disclaimer:
I am not responsible for bricked devices.
I will not give support, if you did not follow flash instructions 'word by word'.
Click to expand...
Click to collapse
Download Require Files - Here>>
And Extract
Step 1 : First install the vcom & usb drivers
Step 2: Copy "SuperSU.zip" in your phone memory.
Step 2 : Now open sp flash tools & select scatter file "MT6580_Android_scatter.txt" with recovery.img.
Step 3 : Remove battery From Phone, Click "Download" on sp flash tool & Connect USB With Cable with PC,
Wait till Successfull.
Step 4 : Now connect battery & press on Vollum Up key and power key at same time.
Step 5 : Press on install button and Select "SuperSU.zip"
Step 6: Now Swipe on install Button.
Step 7 : After successfully instaling supersu, reboot the system.
A Video example (its for i10) - https://www.youtube.com/watch?v=A-hbCWRHaYw&feature=youtu.be
Hit Thanks if you success.
It worked now my i50 is rooted now but i need a cm14 custom rom for it can you help? Please
I need a Symphony i18 twrp or root
Place help us
Need CWM recovery zip file for Symphony Z15
My device name is Symphony Z15 I need CWM recovery zip file,plz help.
V3 Varient and POWER VARIENT Method
(This Method All Rights Reserved To Hovatek as they helped me in Rooting My Device)
Note: Put the supersu zip in the Android Folder of the Internal Memory as recovery is buggy and it wont let you access your SD-CARD and make sure to paste the zip before flashing the recovery.
Fastboot Driver for SPD77xx Chipsets: Here
Step 1: Download This Recovery From Here and unzip it.
Step 2: Enable USB Debugging and enable OEM Unlock then go to fastboot mode via adb.
Step 3: Use Fastboot to Flash the recovery after its done remove the battery and insert it and press volume up and power button until qmobile splash screen shows then release the power button but keep pressing the volume up button until recovery boots up.
Step 4: Flash the zip from therecovery
Step 5: Enjoy .
V2 Varient Method
Step 1: Download This Recovery From Here and Scatter File from Here
and make a folder with these files inside.
Step 2: Enable USB Debugging and turn your phone off and remove your battery and connect your phone with the USB.
Step 3: Open SP-Flash Tool and load the Scatter file and hit the download button.
Step 4: Boot into Recovery and flash the SuperSu Zip and voila.
Please share links I have QMobile X32 V2 and I want to root please help.If you done that with any custom recovery please give me link
Rashidramzan said:
Please share links I have QMobile X32 V2 and I want to root please help.If you done that with any custom recovery please give me link
Click to expand...
Click to collapse
please refer to the method above.
Rooted With V3 Method
Root with v3 Method On Qmobile X32 Power All Credit Goes To Azeem DAr !:good::good::good:
Please make video for root QMobile x32 v2
V2 varient
Links of V2 model are not working. Please refresh the links.
How To Flash Idea Alcatel One Touch 5036D done by Smart Phone Help
flash tool https://spflashtools.com/windows/sp-flash-tool-v5-1812
Firmware 1: http://infopade.com/4sSA
Password: touch
if the above firmware doesn't work for you, try this
Firmware 2: http://infopade.com/4sWN
Password - Gsmtel.in
like video: https://youtu.be/lwN-BLvenEo
Thanks for watching, & please remember to Like this video, if it helped you. I will answer all comments below,
Be sure to share with your friends. !!
Please Reply Me For More Future Videos !!
Once Again, Thanks For Watching Subscribe for more future videos
Steps:
- Step 1: Download and Install the android USB drivers on your computer. In case you have already installed them, you can skip this step.
Step 2: Switch off you Android Phone .
Step 3: Now download the stock ROM or the custom ROM which you want to install on your phone. After downloading, extract the zip file on you system.
Step 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.
Step 5: Form the files listed run the Flash_tool.exe file.
Step 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side.
Step 7: Now locate the scatter file in your custom or stock ROM. It is generally located in the bin/directory.
Step 8: Now click the Download button to start the downloading process.
Step 9: After completed all the above steps, connect your smart phone to your system using the USB cable and press any button other than power button so that your system will detect your device. You can use volume buttons.
Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your device and switch it ON.
Requirements:- Your phone must have atleast 40-50% of battery and USB Drivers