How To Flash Idea Alcatel One Touch 5036D done by Smart Phone Help
flash tool https://spflashtools.com/windows/sp-flash-tool-v5-1812
Firmware 1: http://infopade.com/4sSA
Password: touch
if the above firmware doesn't work for you, try this
Firmware 2: http://infopade.com/4sWN
Password - Gsmtel.in
like video: https://youtu.be/lwN-BLvenEo
Thanks for watching, & please remember to Like this video, if it helped you. I will answer all comments below,
Be sure to share with your friends. !!
Please Reply Me For More Future Videos !!
Once Again, Thanks For Watching Subscribe for more future videos
Steps:
- Step 1: Download and Install the android USB drivers on your computer. In case you have already installed them, you can skip this step.
Step 2: Switch off you Android Phone .
Step 3: Now download the stock ROM or the custom ROM which you want to install on your phone. After downloading, extract the zip file on you system.
Step 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.
Step 5: Form the files listed run the Flash_tool.exe file.
Step 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side.
Step 7: Now locate the scatter file in your custom or stock ROM. It is generally located in the bin/directory.
Step 8: Now click the Download button to start the downloading process.
Step 9: After completed all the above steps, connect your smart phone to your system using the USB cable and press any button other than power button so that your system will detect your device. You can use volume buttons.
Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your device and switch it ON.
Requirements:- Your phone must have atleast 40-50% of battery and USB Drivers
Related
Below is the direct link to download the Gionee F103 Stock Firmware (flash file) from GoogleDrive. Firmware contains Flash Tool, Driver and instructions.
Gionee_F103_0203_T5293.zip
" https://docs.google.com/uc?id=0Bxbxl3u2_t15U2dTbnhYODRaNlk "
Gionee_F103_0203_T5346.zip
" https://docs.google.com/uc?id=0Bxbxl3u2_t15dE9sbXU3NV8zRU0 "
Gionee_F103_0203_T5616.zip
" https://docs.google.com/uc?id=0B3MWIAQ-re4KQ1hLZHFOUWRqd0k "
How to Flash
Step 1: Download and extract the stock firmware on your computer.
Step 2: After extracting you will find the SP Flash Tool, Driver and instruction manual.
Step 3: Install the USB Drivers (skip if drivers are already installed).
Step 4: Open the SP Flash Tool and load the Scatter File from the firmware folder.
Step 5: Connect your Smartphone to the computer using the USB Driver.
Step 6: Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing.
Step 7: Green Ring will appear at the end of successful Flash.
Important Notes:
[*] Take a Backup of your personal data before flashing or installing the firmware on your smartphone. As this helps you to recover the personal data whenever any thing wrong happens.
Hi,
Information like this for Android devices with no dedicated section would go here,
http://forum.xda-developers.com/android/general
XDA Assist is here to help members navigate the site , not for guides.
Thanks! I'll close this thread.
Pre-Requisites
1- You need a PC
2- Sp Flash tools
3- Twrp recovery( search Google)
4- 7zip
5- mtk vcom drivers(also search Google)
Let's Begin
: 1st step install the adb,do it right then reboot
2nd step unzip the twrp folder and get to the the end where you will see a scatter file and the recovery image, then minimize
3rd step open the spflash tools folder then double click on flash_tool
: 4th step click on the choose button in the middle of the three choose buttons you see
5th step locate the folder with the scatter file and twrp
6th step, you will see only the scatter file, double click on it
***********************
The real rooting begins here
***********************
: Click the download button, then put off your phone and remove the battery,
Then connect your phone to the pc
: It will then install twrp
: Once a good sign on the screen of the laptop, unplug the phone
: Then put back the battery of the phone
: Then press and hold the power button and volume up button at the same time till your recovery shows
: Click on the install button on twrp, then locate the SuperSU zip I sent to you, click it and swipe to install, then reboot...
:You should see the SuperSU icon in your app menu upon reboot
Good tut
I need a lineage 13 or 14- based custom rom for tecno w2. Any leads on where to find one? Thanks
First Of All make Sure you have a backup of your stock rom.
[Not Responsible If Your Device Bricks and All, Do it at your own Risk]
Step 1: Download SP-Flash Tool
Step 2: Make sure you have your scatter file for XPlay P9i if u dont have it then get it from here
Step 3: Download the Recovery (not ported by me all rights given to the porter)
Note: After Downloading both the files Put them into a folder and then load the scatter file
Step 4: Make sure to enable USB Debugging From Developer Options and connect your phone by removing the battery and leave it with USB cable attached with the PC.
Step 5: Open SP-Flash tool and Load the Scatter file and hit the download button and when its done it will show the green ring with a tick inside saying download ok
Step 6: Insert the battery and go in recovery mode pressing volume + and power button
Step 7: Flash the SuperSu Zip and voila its done.
The Stock Firmware is a better option for MTK users who love security and warranty while the Custom ROM is a perfect fit for users who prefer customization and control. Stock ROMs come with premium features that aren't found in pure Android operating systems.
Instructions to Install Stock Firmware:
1. Download Firmware zip file is given above and extract it in your computer.
2. Download MTK USB driver and set up it on your computer. In case if in case you have already put in USB driver in your computer skip this step.
3. Next, switch off your smartphone and take away the battery (it’s removable).
4. Now go to the extracted folder in Step 1 and open up the SP Flash Tool sub-folder. You will discover “Flash_tool.exe” file in it. Launch it.
5. As soon as SP Flash tool is launched, click on on “Download” tab.
6. Now, click on on “Scatter-loading” button within the download tab.
7. Next, click on on “Open Scatter File” and choose the scatter file from Step 1. For reference see the picture given under.
8. Now click on on the “Download” button to start out the flashing process.
9. Next, join your Android device to your computer by means of the unique USB cable (without battery – whether it is battery removable) and press volume up or volume down button.
10. The flashing process will start momentarily, and it’ll get accomplished in a minute or two. As soon as it’s over, you will notice the “Download OK” green ring in SP Flash Tool.
11. Now, shut SP Flash tool in your computer and unplug your smartphone.
That’s it. Now you’ve successfully flashed Stock ROM on your MTK device. If you happen to encounter any points whereas following this tutorial, do let me know by way of feedback.
https://www.youtube.com/watch?v=OKgLhk-D608
how to unbrick zte blide v7 lite with original Firmware and twrp and fix nvram and root
The Stock Firmware is a better option for MTK users who love security and warranty while the Custom ROM is a perfect fit for users who prefer customization and control. Stock ROMs come with premium features that aren't found in pure Android operating systems.
Instructions to Install Stock Firmware:
1. Download Firmware zip file is given above and extract it in your computer.
2. Download MTK USB driver and set up it on your computer. In case if in case you have already put in USB driver in your computer skip this step.
3. Next, switch off your smartphone and take away the battery (it’s removable).
4. Now go to the extracted folder in Step 1 and open up the SP Flash Tool sub-folder. You will discover “Flash_tool.exe” file in it. Launch it.
5. As soon as SP Flash tool is launched, click on on “Download” tab.
6. Now, click on on “Scatter-loading” button within the download tab.
7. Next, click on on “Open Scatter File” and choose the scatter file from Step 1. For reference see the picture given under.
8. Now click on on the “Download” button to start out the flashing process.
9. Next, join your Android device to your computer by means of the unique USB cable (without battery – whether it is battery removable) and press volume up or volume down button.
10. The flashing process will start momentarily, and it’ll get accomplished in a minute or two. As soon as it’s over, you will notice the “Download OK” green ring in SP Flash Tool.
11. Now, shut SP Flash tool in your computer and unplug your smartphone.
That’s it. Now you’ve successfully flashed Stock ROM on your MTK device. If you happen to encounter any points whereas following this tutorial, do let me know by way of feedback.
visit tutorial here : https://hygodroid.blogspot.com/2019/10/how-to-unbrick-zte-blide-v7-lite-and.html