Just for those who may find this helpful. I made a patched boot with EFT Dongle, and it will require you to flash using EFT.
Precaution:
Do know that this procedure will brick your warranty, i will not be held responsible if you brick your device as a result of following this guide. Make sure you follow guide properly and do not miss a single step!
How To Root SM-J730GM Android Oreo,8.1.0, Binary 5.
Step 1. Go to this page, download the Root file
Link To Get Root File
Step 2. Open EFT Dongle Software, Go to Android, Next Samsung.
Step 3. Click On EFT, then Tap On .EFT File and go to where you saved the root file above.
Step 4. Enable Oem and usd debugging mode.
Step 5. Boot device to download mode, connect to PC and scan usb port.
Step 6. Press Flash, wait for device to disaplay verification failed, press reset and wait for device to completely erased and restarted.
Step 7. Set up device and enable Oem and Usb debugging mode again.
Step 8 Boot back to download mode, connect to PC , scan usb port, then press flash finally.
Step 9. Your device should boot up completely now and you will be rooted.
You can install superuser apk from GooglePlaystore if need be.
Related
Hi! All.
This one is for noobs to root their phone in the same way as the moderators explained but in easy language.
1. Download flashtool for xperia, google it and you got that.
2. Then download the 4.1.A.0.562 kernel for your 2011 xperia, you could google it or try it on 4shared, all you'll get there.
3. Go to flashtools>firmwares and delete everything present and then put the downloaded kernel.
4. Also you need to install the adb drivers for your phone. If you're not sure of that then go to flashtools>drivers and install the specific driver of your phone.
5. Now go to settings>developer options> and turn on usb debugging.
Then go to security and tick unknown sources.
6. Now switch the usb connection mode to mass storage mode(MSC).
7. Connect your xperia to your computer. Open flashtools.exe and click on the flash icon (that like a lightning/bolt) and select flashmode. Click on the respective kernel and click OK.
8. Follow the on screen instructions and you're done.
**You also need to download DoomLord's rooting toolkit for xperia.
9. Now turn on your phone, when the sony logo appears plug it to your computer and open your rooting toolkit and press enter.
10. Your phone may reboot several times, don't worry about that.
11. After it is over now again connect it to your computer, open flashtool.
**You also need to download the 4.1.B.0.587 kernel for your respective xperia, most probably you'll get it on 4shared.
12. Put that kernel in flashtool>firmwares.
13. Now again click the same flash icon and select the 4.1.B.0.587 and click on ok.
14. Follow the on screen instructions and you're done.
15. If there isn't any superuser or superSu app installed, that means you've not followed the steps proper and you are not able to complete rooting.:laugh::good:
COMPLETE SOLUTION ALL IN ONE TO UNLOCK BOOTLOADER, STUCK AT 50%, UNKNOWN ERROR -1
I have been looking all the thread but none of them say u need a internet connection even ur phone ia in bootloader mode make sure your pc has internet connection if it has u won't get 50% error and 99% error
And forgot that 86012 chinese error no need try that thing it works without adding on it.
Dear User,
apply for Unlocking Bootloader Permission from en.miui.com/unlock
Make sure your information matches on i.mi.com, en.miui.com and enable Find Device on your phone
**************
REQUIREMENT:
*****************
Thing you need:-
1) A PC With*Windows*xp/7/8/8.1/10 installed
2) A BRAIN
3)A PHONE
4) USB*Cable
4) ADB Drivers and FASTBOOT DRIVER 15 SEC INSTALL FASTEST EVER4. ADB Drivers [*http://forum.xda-developers.com/show....php?t=2588979*]
5. MiFlashUnlock*Tool*[https://drive.google.com/uc?id=0B95Y...xport=download*] grab the letest version if possible
6.*Qualcomm*Driver [http://cloud.xiaomitips.com/utility/...s_QDLoader.zip]
7. A Internet connection
7. Lots of Patience.
****************************************
INSTRUCTIONS (Changing*Phone*Setting)
****************************************
1. Now you are having unlocking permission on your*phone. So login into the*Mi*account in yourphone*with the same id on which you got the unlocking permission.
2. Now remove*Fingerprint*and Pattern Lock.
3. On your*Redmi*3s/3s Prime, go to Settings > About*Phone*> Tap on "MIUI Version" 7 times. This will enable*Developer*Options.
3. Now go to Settings >*Developer*options > enable "USB*debugging" and "OEM unlocking"
4. Open the "MI*Account"*app*on your*phone*and Login with the*Phone*number or id that you used to get the unlocking Permission.
****************************************
INSTRUCTIONS 3 (Downloading & Installing)
****************************************
All Downloading links are given in "Requirement" section.*Install*one by one in sequential order on your laptop/PC.
1. Disable Driver Signature Enforcement in yoursystem*[*http://en.miui.com/thread-237673-1-1.html*]
2. Download &*Install*Mi*PC*Suite.
3. Download &*Install*Mi*Flash*Tool.
4. Download ADB driver and*install*it.
5. Download MiFlashUnlock*Tool*and extract todesktop. It will be easy to find & use from thedesktop.
6. Download and*install*Qualcomm*Driver. (ToInstall*Qualcomm*Driver, you have to extract the downloaded "Qualcomm_Drivers_QDLoader.zip"file*and open the extracted folder. Within some folder u will find the*file*"qcser.inf" Right click on it and click*install. )
7. Restart your PC/Laptop.
*****************************************
INSTRUCTIONS 4 (Unlocking Bootloader)
*****************************************
METHOD
************
1. On your*computer, open MiFlashUnlock folder which you have extract in the*desktop.
2. Right click on MiFlashUnlock.exe and select "Run it as administrator" & click on 'Yes'
3. Login into the unlocking*tool*on*PC*with the same*Mi*account.
4. Reboot your*phone*into Bootloader mode. To do that, simply turn off your*device, press & holdPower*button + Volume down buttons at the same time. Hold until you see*Mi*Bunny Fastboot logo.
5. Now connect your*phone*to the*computerusing its*USB*cable.
6. Once your*phone*is connected, the Unlock button will become active.
7. Simply click on the Unlock button to start the process. The unlock process will take about 10 – 15 seconds to complete.
8. You will see the message in green color "Unlocking Successfully" then you are the luckiest guy in this world who unlocked the bootloader in an easiest way.
9. Follow if you stuck at 50%
Wait for 2-5 days and try again make sure u still have internet connection
10. For those who stuck in 99% and getting error -1 make sure u have internet connection while unlocking and installed drivers.
Source: xda, miui, and
First Of All make Sure you have a backup of your stock rom.
[Not Responsible If Your Device Bricks and All, Do it at your own Risk]
Step 1: Download SP-Flash Tool
Step 2: Make sure you have your scatter file for XPlay P9i if u dont have it then get it from here
Step 3: Download the Recovery (not ported by me all rights given to the porter)
Note: After Downloading both the files Put them into a folder and then load the scatter file
Step 4: Make sure to enable USB Debugging From Developer Options and connect your phone by removing the battery and leave it with USB cable attached with the PC.
Step 5: Open SP-Flash tool and Load the Scatter file and hit the download button and when its done it will show the green ring with a tick inside saying download ok
Step 6: Insert the battery and go in recovery mode pressing volume + and power button
Step 7: Flash the SuperSu Zip and voila its done.
I finally succeeded it, after literally months of trial and error! So, I am writing this post in hope that someone who wants to install Oreo on Life One X in the future would find this post through Google search.
Here are the steps.
0. From this page (https://forum.xda-developers.com/android/development/rom-official-mados-wiko-fever-clones-t3762800), download the TWRP recovery and the madOS Oreo ROM.
1. Download the BLUEFEVER ROM from this page (https://www.npcglib.org/~stathis/blog/2016/04/13/turned-blu-life-one-x-wiko-fever-4g/).
2. Download the SP Flash Tool from the page above or through Google search. The version I used was 5.1812, which seemed to be the latest version.
3. Download the Universal ROM from this page (https://forum.xda-developers.com/android/development/flashable-wiko-fever-stock-marshmallow-t3720484)
4. The critical things is you should not flash the Universal ROM as it is, because that bricked my One X. You need to copy "preloader_l5460.bin" and "secro.img" from BLUEFEVER in step 1 and overwrite them to the Universal ROM.
5. You need to install the Mediatek Driver. I used "MT65XX USB VCOM" driver. I found it using Google search, but forgot where I got it from. But with that name, I think you can find it.
6. Now start the Flash Tool, and and select the download agent in the Flash Tool directory (MTK_AllInOne_DA.bin), and select the scatter file in the Universal rom (MMX BLU), and then select "Format all + Download". Then, this is very important, press the download button BEFORE connecting the phone, otherwise it will not work.
7. Now, turn off the phone (I mean, power off, not just screen off) and then connect it to the PC. If the tool does not recognise the phone, press volume up + down at the same time when you connect it until the device connected sound comes from Windows.
8. Now the tool flashs the rom. Wait. It may take a few minutes.
9. If it is bricked, just leave it for a month until the battery drains and completely turns off, and then try flashing again.
10. Now, boot up the phone, go to Settings -> About and hit the build number several times to enable the developer menu.
11. In the developer menu, enable OEM unlocking.
12. Now, install the Google USB Driver. This can be easily found through a Google search. You need to get the "platform-tools" directory of the Android SDK, which can also be easily found.
13. Now, turn off the phone, and hold volume up + power button. The phone shows tiny menu (really tiny...). The first is recovery, the second is fast boot, and the third is normal. Choose fast boot. Type "fastboot oem unlock". You need to press the volume up button on the phone now.
14. Now the phone is unlocked. Type "fastboot.exe flash recovery twrp_wiko_fever_oreo.img" to flash the recovery.
15. Restart in the recovery using the 13th step.
16. Go to Wipe -> Format data and format the data, otherwise the recovery will not recognise the storage and will not boot.
17. Go to Open Gapps and get ARM64, 8.1, micro. Editions above micro will NOT install with an error message that says insufficient storage.
18. Now connect the phone to the PC. The TWRP recovery automatically mounts the storage to the PC so that you can copy files into it. Copy the mad OS rom ZIP from step 0 and the OpenGapps from step 17.
19. Flash the two using the install menu of TWRP.
20. Done.
I do not use One X as a phone, so I skipped the radio flashing steps. It currently shows the baseband is unknown. If you want to use the phone feature, I think you need to flash the radio img or something using the instructions somewhere in the linked posts.
Find here SP Flash Tool
This is my personal way on how I got to root my phone
WARNING: ROOTING WILL VOID WARRANTY (MEANING NO WARRANTY) AND WILL DELETE ALL DATA
You need around 2 hours to do this if you don't have experience with it!
Requirements:
Unlocked bootloader
Latest version of Odin 3.13.3
Your firmware CSC (go to settings > about phone > software information > Service provider software version and see the last 3 letters, that is your CSC)
A brain, patience, common sense, time, basic computer knowledge
Step 1: Download firmware from here, in the link change CNX to your CSC (3 letter thing mentioned in requirements)
Step 2: Extract your AP file from the firmware zip
Step 3: Patch your entire AP file with magisk, from your phone
Step 4: Move the patched AP file to your pc
Step 5: Click AP in ODIN and choose the patched file
Step 6: Close your phone, hold vol up and vol down and after 8 seconds, connect your USB into your phone, then open download mode by pressing the vol up key
Step 7: Disable auto reboot from options. Now press START on ODIN, wait till it says Pass!
Step 8: Re-download the magisk app used to patch the AP file, and follow the steps that magisk gives! (DO NOT RESTART YOUR PHONE BEFORE FINISHING WITH THIS STEP, YOU WILL HAVE TO FLASH ALL ORIGINAL FILES AGAIN)
Congratulations, you are now rooted!
Hello after successful rooting I'm having issues with Sim.It basically won't recognize Sims on both slots when device starts up it gives me message "IMEI (or MEID) is missing".Any ideas?I have removed all root/restored original firmware and relocked bootloader doesn't seem to work.
Not sure, I'm one of the noobs too, have you over clocked? Maybe it broke it.
Try erasing all data, and reinsert the SIM
Tried everything nothing works even flashing older firmwares doesn't help
Nope didn't overclock just rooted
Get it to a service, they will tell you the problem with the tray, did you root with my tutorial?
KASSINOs said:
This is my personal way on how I got to root my phone
WARNING: ROOTING WILL VOID WARRANTY (MEANING NO WARRANTY) AND WILL DELETE ALL DATA
You need around 2 hours to do this if you don't have experience with it!
Requirements:
Unlocked bootloader
Latest version of Odin 3.13.3
Your firmware CSC (go to settings > about phone > software information > Service provider software version and see the last 3 letters, that is your CSC)
A brain, patience, common sense, time, basic computer knowledge
Step 1: Download firmware from here, in the link change CNX to your CSC (3 letter thing mentioned in requirements)
Step 2: Extract your AP file from the firmware zip
Step 3: Patch your entire AP file with magisk, from your phone
Step 4: Move the patched AP file to your pc
Step 5: Click AP in ODIN and choose the patched file
Step 6: Close your phone, hold vol up and vol down and after 8 seconds, connect your USB into your phone, then open download mode by pressing the vol up key
Step 7: Disable auto reboot from options. Now press START on ODIN, wait till it says Pass!
Step 8: Re-download the magisk app used to patch the AP file, and follow the steps that magisk gives! (DO NOT RESTART YOUR PHONE BEFORE FINISHING WITH THIS STEP, YOU WILL HAVE TO FLASH ALL ORIGINAL FILES AGAIN)
Congratulations, you are now rooted!
Click to expand...
Click to collapse
My odin says pass but my phone isnt doing anything, what do i do?
patch the entire AP file, that should work, does it say pass after 3 seconds?