Backstory:
I Bought this device from Pakistan for Rs15500 or 147 US Dollars. It was a relatively cheap and good device and like all QMobile Devices i thought it would have a counterpart in the Micromax Community like my old phone Qmobile Noir A10 and as it is known in India as Micromax A110.
Sadly i was mistaken. i scoured the net for any device resembling mine and none were found ... well none that had Android 7 or the same chip set.
SO Last Night i Sat Down and Worked and Somehow i was able to port a semi-working TWRP Recovery for This Device :fingers-crossed:
It Doesn't currently mount the Internal Storage... External SDCARD WORKS :good:
AND NOW THE GUIDE TO ROOT.
****************************************************************************************
Pre-Requisites.
Unlocked Bootloader
ADB ON PC
USB With OTG Support or USB AND OTG CABLE
PATIENCE
****************************************************************************************
To Unlock Bootloader.
WARNING UNLOCKING BOOTLOADER WILL WIPE DEVICE SO BACK IT UP
Go TO Developer Options
Scroll Down to OEM UNLOCKING and Check it
Connect phone to PC
Then Open CMD and TYPE
Code:
adb reboot bootloader
Wait til it boots into fastboot mode [ Black screen with tiny text at bottom]
Then Type
Code:
fastboot oem unlock
Press enter and Follow guide on Phone screen
After Completion of Unlocking type
fastboot reboot
Click to expand...
Click to collapse
Boot into Device and Set it up
Then Download Recovery.img from https://mega.nz/#!ewVSyI7B!xAvgnzYORGFCtXLyxerNt9hx8Awz-5hNO2vlz5uabfo
****************************************************************************************
FLASHING RECOVERY
Reboot back into bootloader and type
Code:
fastboot flash recovery **DRAG&DROP RECOVERY.IMG HERE**
Press enter
then type
Code:
fastboot reboot
****************************************************************************************
ROOTING
Go to http://www.supersu.com/download and Download the Latest zip file.
Place the zip file on a usb.
Connect Phone to PC
Type
Code:
adb reboot recovery
and Press Enter
Phone should boot into TWRP
Disconnect from PC
Connect USB-OTG To Phone.
go to Mount and click on Select Storage and Choose USB-OTG
now go to Install and Choose The SUPERSU Update zip file and flash it.
AND REBOOT.
****************************************************************************************
Phone will reboot and during mid boot it will reboot again .... that is totally normal.
and Now Your Device is ROOTED Congrats
****************************************************************************************
If any dev wants to fix the recovery he can do it but give credit where its due .
External SDCard Works and This Recovery might as well work with Panasonic Eluga A3 as they both are identical copies of each other ...
************************************************************************************************************
Rooting With Locked Bootloader.
Pre-Requisites :
1 ) Locked Bootloader
2 ) SP FlashTool --> Download HERE
3 ) TWRP From Above or HERE
4 ) Modified Scatter File from HERE
5 ) Magisk Zip file and Magisk Manager and Keep them in SDCARD OR USB with OTG
******************************************************************************************************************
Flashing Stuff Guide.
Turn off Your Device
Download and Extract the SP Tool to some directory
Download the TWRP and Scatter file and keep them in a folder together
Rename the twrp file to recovery.img
Open SP Flash tool and Load the scatter file.
Below That set the Download Mode to Download Only, Not Firmware upgrade or Format + Download.
Then press the Green Download Button.
OR SEE HERE
Connect the usb cable to your mobile phone and not to the pc
Press and Hold the vol up and vol Down buttons simultaneously and connect the usb cable to the PC.
The Flashtool should Detect your device and start flashing the recovery img.
After completion device should be powered off.
Press and hold the vol UP button while powering up the device to boot into twrp.
In Twrp go to install and change storage to sdcard and locate the magisk zip file and install it.
after installation reboot to system. and install the magisk manager app
Congrats You have successfully rooted your device with a locked bootloader.:laugh::laugh:
Now with magisk you can install Xposed and various other mods systemlessly.
Enjoy
*************************************************************************
For and further inquiries comment below.
Reserved
1) SDCard works fine with recovery
2) Found identical device . Panasonic Eluga A3
3) Will test Recovery of Eluga A3 soon :fingers-crossed:
i have done all the steps you mentioned ..but it stucks on applying update from sd card...
USB-OTG is not showing ...when i try to update through sd card ,,,IT says ""Installation aborted"
bluedrago said:
i have done all the steps you mentioned ..but it stucks on applying update from sd card...
USB-OTG is not showing ...when i try to update through sd card ,,,IT says ""Installation aborted"
Click to expand...
Click to collapse
The Stock System of Noir E2 is Encrypted ..... all nougat based systems are encrypted
You need to backup all data in internal storage to your pc and go to TWRP and Go to Wipe and CLICK ON FORMAT DATA BUTTON
that will remove encryption and allow you to flash zip files
Do you have any custom rom for qmobile e2 like Cm14 rom or miui rom or any other
Bro i want another rom which can be flashed into the qmobile e2.The stock firmware is not good and it lags.
Also i don't like its stock firmware user interface.
So is there any way to flash another rom in it.
I searched alot about it but can't find any rom which can be flashed into it
And u r last hope.
I hope u will have any solution.:good:
Reply must. I am waiting.
Aqdas Iftikhar said:
Bro i want another rom which can be flashed into the qmobile e2.The stock firmware is not good and it lags.
Also i don't like its stock firmware user interface.
So is there any way to flash another rom in it.
I searched alot about it but can't find any rom which can be flashed into it
And u r last hope.
I hope u will have any solution.:good:
Reply must. I am waiting.
Click to expand...
Click to collapse
All I can share with you is the stock rom of Panasonic Eluga A3. If you want that do reply
Yes I Want Bro. Also share the method to port/Flash it. And have u tested it.
andromodgod said:
All I can share with you is the stock rom of Panasonic Eluga A3. If you want that do reply
Click to expand...
Click to collapse
Also tell me if everything is working on Panasonic rom like fingerprint sensor and sdcard etc.
I have read the specs of Panasonic eluga a3 and gsmarena shows that there is no fingerprint sensor in Panasonic eluga a3. So plz tell me that everything is working correctly or there is some bugs.
And share me the method to port/flash that rom.
I will me thankful to you.
Aqdas Iftikhar said:
Also tell me if everything is working on Panasonic rom like fingerprint sensor and sdcard etc.
I have read the specs of Panasonic eluga a3 and gsmarena shows that there is no fingerprint sensor in Panasonic eluga a3. So plz tell me that everything is working correctly or there is some bugs.
And share me the method to port/flash that rom.
I will me thankful to you.
Click to expand...
Click to collapse
Everything works .... You will have to flash the OS via SP Flash tools so make backup of everything in your internal storage ... Also it comes with some preinstalled apps so you will have to delete those .... But over all it's a much more optimized system than the QMobile OS.
https://drive.google.com/uc?id=0B4KUp-X2vfc3aVpiQUdiQ293OGM&export=download
Download from above ... Flash using SP Flash tools and after setting phone up there will be a small update ... Install that and then flash twrp and install magisk and if you want install Xposed as well.
Enjoy.
I got an error in sp flash tool and also Non removable battery problem
andromodgod said:
Everything works .... You will have to flash the OS via SP Flash tools so make backup of everything in your internal storage ... Also it comes with some preinstalled apps so you will have to delete those .... But over all it's a much more optimized system than the QMobile OS.
https://drive.google.com/uc?id=0B4KUp-X2vfc3aVpiQUdiQ293OGM&export=download
Download from above ... Flash using SP Flash tools and after setting phone up there will be a small update ... Install that and then flash twrp and install magisk and if you want install Xposed as well.
Enjoy.
Click to expand...
Click to collapse
The error shown is given below:-
{Initializing scatter file failed. Please check the name of scatter file which you load is legal.}
Also it select only two files:-
1- logo
2- system
Plzz fix this problem and can u plz send me a video tutorial because my device has non removable battery and also not get detected in sp flash tool.
Thanks
---------- Post added at 03:05 PM ---------- Previous post was at 02:30 PM ----------
andromodgod said:
Everything works .... You will have to flash the OS via SP Flash tools so make backup of everything in your internal storage ... Also it comes with some preinstalled apps so you will have to delete those .... But over all it's a much more optimized system than the QMobile OS.
https://drive.google.com/uc?id=0B4KUp-X2vfc3aVpiQUdiQ293OGM&export=download
Download from above ... Flash using SP Flash tools and after setting phone up there will be a small update ... Install that and then flash twrp and install magisk and if you want install Xposed as well.
Enjoy.
Click to expand...
Click to collapse
i old version of sp flash tool the file opens with an error
i tried new version 5.1524.00 but in that version the file even doesnt loads.'
plzz help me i am tired of the bugs which r present in qmobile os.
I will be very very thankful to u.
Aqdas Iftikhar said:
The error shown is given below:-
{Initializing scatter file failed. Please check the name of scatter file which you load is legal.}
Also it select only two files:-
1- logo
2- system
Plzz fix this problem and can u plz send me a video tutorial because my device has non removable battery and also not get detected in sp flash tool.
Thanks
---------- Post added at 03:05 PM ---------- Previous post was at 02:30 PM ----------
i old version of sp flash tool the file opens with an error
i tried new version 5.1524.00 but in that version the file even doesnt loads.'
plzz help me i am tired of the bugs which r present in qmobile os.
I will be very very thankful to u.
Click to expand...
Click to collapse
Download Latest Version of SP Flash tool from http://spflashtool.com
Then extract the Downloaded OS into a separate folder on your desktop.
Then open SPFlash tools and Switch off your device ...
Load the scatter file on to SPFlash tolls that you extracted ... It will be in the OS folder with all the .img files.
Press the start button.
Then connect your device to the PC ... Remember device must be switched off properly.
Flashing should begin automatically.
Many Thanks bro I have flashed the ROM successfully
Thanks for ur help.
After alot of stuggle and with your help I have successfully flashed Panasonic rom.
U said that there will be an update but I checked and it says the software is latest and no upset available.
Why in my phone there is no update??.
Aqdas Iftikhar said:
Thanks for ur help.
After alot of stuggle and with your help I have successfully flashed Panasonic rom.
U said that there will be an update but I checked and it says the software is latest and no upset available.
Why in my phone there is no update??.
Click to expand...
Click to collapse
i forgot ... the link that i shared had the lastest update already .
I tried to root my device and in fast boot i encountered a problem
andromodgod said:
Backstory:
I Bought this device from Pakistan for Rs15500 or 147 US Dollars. It was a relatively cheap and good device and like all QMobile Devices i thought it would have a counterpart in the Micromax Community like my old phone Qmobile Noir A10 and as it is known in India as Micromax A110.
Sadly i was mistaken. i scoured the net for any device resembling mine and none were found ... well none that had Android 7 or the same chip set.
SO Last Night i Sat Down and Worked and Somehow i was able to port a semi-working TWRP Recovery for This Device :fingers-crossed:
It Doesn't currently mount the Internal Storage... External SDCARD WORKS :good:
AND NOW THE GUIDE TO ROOT.
****************************************************************************************
Pre-Requisites.
Unlocked Bootloader
ADB ON PC
USB With OTG Support or USB AND OTG CABLE
PATIENCE
****************************************************************************************
To Unlock Bootloader.
WARNING UNLOCKING BOOTLOADER WILL WIPE DEVICE SO BACK IT UP
Go TO Developer Options
Scroll Down to OEM UNLOCKING and Check it
Connect phone to PC
Then Open CMD and TYPE
Code:
adb reboot bootloader
Wait til it boots into fastboot mode [ Black screen with tiny text at bottom]
Then Type
Code:
fastboot oem unlock
Press enter and Follow guide on Phone screen
After Completion of Unlocking type
Boot into Device and Set it up
Then Download Recovery.img from https://mega.nz/#!KgMVgDwA!ImQoiSBUf9GitR5_K5Dxlzq01P0V4oqsZu5K2-RjZNQ
****************************************************************************************
FLASHING RECOVERY
Reboot back into bootloader and type
Code:
fastboot flash recovery **DRAG&DROP RECOVERY.IMG HERE**
Press enter
then type
Code:
fastboot reboot
****************************************************************************************
ROOTING
Go to http://www.supersu.com/download and Download the Latest zip file.
Place the zip file on a usb.
Connect Phone to PC
Type
Code:
adb reboot recovery
and Press Enter
Phone should boot into TWRP
Disconnect from PC
Connect USB-OTG To Phone.
go to Mount and click on Select Storage and Choose USB-OTG
now go to Install and Choose The SUPERSU Update zip file and flash it.
AND REBOOT.
****************************************************************************************
Phone will reboot and during mid boot it will reboot again .... that is totally normal.
and Now Your Device is ROOTED Congrats
****************************************************************************************
If any dev wants to fix the recovery he can do it but give credit where its due .
External SDCard Works and This Recovery might as well work with Panasonic Eluga A3 as they both are identical copies of each other ...
************************************************************************************************************
Rooting With Locked Bootloader.
Pre-Requisites :
1 ) Locked Bootloader
2 ) SP FlashTool --> Download HERE
3 ) TWRP From Above or HERE
4 ) Modified Scatter File from HERE
5 ) Magisk Zip file and Magisk Manager and Keep them in SDCARD OR USB with OTG
******************************************************************************************************************
Flashing Stuff Guide.
Turn off Your Device
Download and Extract the SP Tool to some directory
Download the TWRP and Scatter file and keep them in a folder together
Rename the twrp file to recovery.img
Open SP Flash tool and Load the scatter file.
Below That set the Download Mode to Download Only, Not Firmware upgrade or Format + Download.
Then press the Green Download Button.
OR SEE HERE
Connect the usb cable to your mobile phone and not to the pc
Press and Hold the vol up and vol Down buttons simultaneously and connect the usb cable to the PC.
The Flashtool should Detect your device and start flashing the recovery img.
After completion device should be powered off.
Press and hold the vol UP button while powering up the device to boot into twrp.
In Twrp go to install and change storage to sdcard and locate the magisk zip file and install it.
after installation reboot to system. and install the magisk manager app
Congrats You have successfully rooted your device with a locked bootloader.:laugh::laugh:
Now with magisk you can install Xposed and various other mods systemlessly.
Enjoy
*************************************************************************
For and further inquiries comment below.
Click to expand...
Click to collapse
Bro when i booted into fastboot after executing command to unlock bootloader in mobile it says to press volume up key and i pressed it again and again but no response but when i press volume down key it executes instantly and volume down key purpose is to not unlock bootloader.
plzz help me.
also in locked boot loader method sp flash tool says (enable dram failed) and thus i cannot flash recovery
.
plzzz help me out.
i have installed panasonic eluga a3 rom
Aqdas Iftikhar said:
Backstory:
I Bought this device from Pakistan for Rs15500 or 147 US Dollars. It was a relatively cheap and good device and like all QMobile Devices i thought it would have a counterpart in the Micromax Community like my old phone Qmobile Noir A10 and as it is known in India as Micromax A110.
Sadly i was mistaken. i scoured the net for any device resembling mine and none were found ... well none that had Android 7 or the same chip set.
SO Last Night i Sat Down and Worked and Somehow i was able to port a semi-working TWRP Recovery for This Device :fingers-crossed:
It Doesn't currently mount the Internal Storage... External SDCARD WORKS :good:
AND NOW THE GUIDE TO ROOT.
****************************************************************************************
Pre-Requisites.
Unlocked Bootloader
ADB ON PC
USB With OTG Support or USB AND OTG CABLE
PATIENCE
****************************************************************************************
To Unlock Bootloader.
WARNING UNLOCKING BOOTLOADER WILL WIPE DEVICE SO BACK IT UP
Go TO Developer Options
Scroll Down to OEM UNLOCKING and Check it
Connect phone to PC
Then Open CMD and TYPE
Wait til it boots into fastboot mode [ Black screen with tiny text at bottom]
Then Type
Press enter and Follow guide on Phone screen
After Completion of Unlocking type
Boot into Device and Set it up
Then Download Recovery.img from https://mega.nz/#!KgMVgDwA!ImQoiSBUf9GitR5_K5Dxlzq01P0V4oqsZu5K2-RjZNQ
****************************************************************************************
FLASHING RECOVERY
Reboot back into bootloader and type
Press enter
then type
****************************************************************************************
ROOTING
Go to http://www.supersu.com/download and Download the Latest zip file.
Place the zip file on a usb.
Connect Phone to PC
Type
Bro when i booted into fastboot after executing command to unlock bootloader in mobile it says to press volume up key and i pressed it again and again but no response but when i press volume down key it executes instantly and volume down key purpose is to not unlock bootloader.
plzz help me.
also in locked boot loader method sp flash tool says (enable dram failed) and thus i cannot flash recovery
.
plzzz help me out.
i have installed panasonic eluga a3 rom
Click to expand...
Click to collapse
After pressing volume up.key few times ... Press the home button . Phone thinks that vol up is home button ... Dunno why that is though ??
andromodgod said:
After pressing volume up.key few times ... Press the home button . Phone thinks that vol up is home button ... Dunno why that is though
Click to expand...
Click to collapse
bro i have unlocked bootloader succesfully.
but when i give command to flash recovery the adb show tranfering and then ok.
but after reboot when i give command to reboot to recovery it boots into panasonic stock recovery.
plzz help me.
and also tell me why sp flash tool is giving me (failed to enable dram error) and give solution.
i hope u will have solution of these matter.
Many Thanks.:fingers-crossed::good:
Aqdas Iftikhar said:
bro i have unlocked bootloader succesfully.
but when i give command to flash recovery the adb show tranfering and then ok.
but after reboot when i give command to reboot to recovery it boots into panasonic stock recovery.
plzz help me.
and also tell me why sp flash tool is giving me (failed to enable dram error) and give solution.
i hope u will have solution of these matter.
Many Thanks.:fingers-crossed::good:
Click to expand...
Click to collapse
After flashing recovery in fastboot . Use this command WHILE HOLDING VOL UP BUTTON
Fastboot reboot
Then phone will reboot into twrp recovery .
I'll need to research on the other one.
I have rooted my device but cannot boot into system twrp opens again and again.
andromodgod said:
After flashing recovery in fastboot . Use this command WHILE HOLDING VOL UP BUTTON
Fastboot reboot
Then phone will reboot into twrp recovery .
I'll need to research on the other one.
Click to expand...
Click to collapse
Bro after rooting my device i restarted my device but twrp recovery boots again and again and not boot the system.
in twrp i selected to reboot to system but it open twrp recovery again.
i wipe the data and cache but still twrp is openeing.
plzz help me i even cannot acces my device in this situation.
Reply fast.
---------- Post added at 05:46 AM ---------- Previous post was at 05:29 AM ----------
andromodgod said:
After flashing recovery in fastboot . Use this command WHILE HOLDING VOL UP BUTTON
Fastboot reboot
Then phone will reboot into twrp recovery .
I'll need to research on the other one.
Click to expand...
Click to collapse
Bro tell me can i relock bootloader and remove or unflash twrp recovery after gaining root access.
if yes tell me how i can remove twrp recovery becasue it is irritating.
Plzz help me out.
When I click Mount/System it returns back to first option (Reboot) with a blink.
I am following first method.
Please help me.
PLzzzzzzzzzzzzzzz
PLz update the link of magisk zip file
The current link is not working. So plz update the link of magisk zip file.
FIXED: Mount Internal Storage in TWRP (Q Mobile Noir E2)
To mount internal storage in TWRP Recovery, Click on Wipe > Format Data > Type "yes" and Click on Ok. Then Reboot into Recovery. Now your Internal Storage is Mounted in TWRP. But it will format whole internal storage and factory reset rom so make a backup before doing this.
Related
Soft Bricking ?
Phone starts and stuck on the Yu logo.
Hard Bricking?
Phone does not start even if the battery is full. Have to go to the service center.
[Note]
1.Make sure that you have 70-80% battery on your phone.
2.You need a PC and a USB cable to connect your phone to the PC.
3.Flashing the factory firmware will wipe all the data present in the internal memory. So, make a backup of that if you can.
[Required Downloads]
1.Download the flash tools.
2. Download the factory firmware (signed fastboot)
3. adb setup drivers.
4. Mirror for drivers manual install here.
5. You can use this tool performs various functions.
# [Install Adb Derives Manually]
1. First of all extract the downloaded file and save it in the computer.
2. Before installation you have to disable the "signature verification" in windows. In windowa 8 or 10 you can do it by going to advanced settings or you can google the way of disabling signature verification.
3. After that turn off the phone and connect it pressing vol up that it will boot in fastboot mode.
4. When you connect the phone go device manager and search for device connected showing error sign.
5. Now click on that device and check for deriver update.
6. Now select the deriver in computer not automatically and select all devices.
7. Now select "have disk"
8. Browse the folder where you had extracted the adb drivers.
9. Now select the drivers file and install.
10. Ignores the Warning and select "always allow"
11. When finished check the device again by connecting to computer in fastboot mode with usb.
# [Flash Factory Firmware]
Steps
1. Extract the flashtools zip in a new folder on the desktop.
2. Extract the factory firmware zip in the same folder and make sure that all of the flashtools files are also present.
3. Now, power off your phone. If you are stuck in a bootloop, then pull out the battery and reinsert it. (Do not switch on the phone.)
4. While pressing the Volume Up key, connect your phone to the PC with the help of a USB cable.
5. You should now see the fastboot logo on your device. If you did, leave the Volume Up key. (If you do not see the logo, retry the process.)
6. Now go to the folder where you extracted the flash tools and factory firmware and run the flash-all.bat by double clicking on it.
7. A command window will open and the flashing procedure will start. (Make sure that your device does not disconnect from your PC during the procedure.)
8. The command window will automatically close once the procedure is completed.
9. Disconnect your device and boot it up by pressing the Power button. The first boot might take around 5-10 minutes to complete.
Congrats!
# [Recovey Installation (Very Easy Method)]
Note
1. Phone must has unlocked bootloader.
2. It must be rooted.
Steps
1. Download the twrp.img file and place it into your phone storage.( you can choose any custom recovery)
2. Now download the app from playstore flashify
3. Now install it and open the app it will require permission for root access, allow the root access.
4. Now open the app and u can backup the current recovery.
5. Now select the "flash" menu and select the "recovry image" and choose the .img file from storage.
6. Then select yes for flashing warning and will says flashing recovery. After completion it will say flash completed.
7. Now select the option button on right top corner and select the reboot into recovery.
8. Now it will reboot into recovery.
Hit "Thanks" if found this thread helpful....
Thanks for the solution...... it works well !!
Though my yuphoria was working perfectly fine, i wanted to factory reset my mobile for some reasons, which i was not able to do. Both soft and hard custom recovery options were not working (no recovery screen pop up, mobile boots and stuck at YU logo ), tried your solution and it worked.
Just one input for new users like me, where you have asked users to install adb drivers, i tried that part but on running the bat file, the device was not detected, hence had to add yuphoria device drivers from their official site, i am not able to paste the link here but file name is YUPHORIA_drivers-v1.0.zip, also USB debugging option needs to be turned on in developer option for this solution to work.
Rest all steps work exact as you explained.
Sahilsharma said:
Though my yuphoria was working perfectly fine, i wanted to factory reset my mobile for some reasons, which i was not able to do. Both soft and hard custom recovery options were not working (no recovery screen pop up, mobile boots and stuck at YU logo ), tried your solution and it worked.
Just one input for new users like me, where you have asked users to install adb drivers, i tried that part but on running the bat file, the device was not detected, hence had to add yuphoria device drivers from their official site, i am not able to paste the link here but file name is YUPHORIA_drivers-v1.0.zip, also USB debugging option needs to be turned on in developer option for this solution to work.
Rest all steps work exact as you explained.
Click to expand...
Click to collapse
Yup bro its difficult to set bootloader driver for yuphoria. But you can install it manually. But always remember to "disable driver signature verification" before installation and i will update the derivers link for manual installation if you message me the link.
will this work on unlocked bootloader
nickjones1007 said:
will this work on unlocked bootloader
Click to expand...
Click to collapse
"yup"... it will work. There is nothing to do with boot loader. It will flash the stock rom and boot-loader will get locked again. You have to unlock the boot-loader again if you want to flash custom rom again.
And i will get the official ota updates from YU as well ?
Sent from my YU5010 using Tapatalk
nickjones1007 said:
And i will get the official ota updates from YU as well ?
Sent from my YU5010 using Tapatalk
Click to expand...
Click to collapse
yep bro.. you will get the updates and i don't think you know that, there are no restrictions for unlocking/locking boot-loader of YU mobile. I mean the warranty not void if you unlock the boot-loader.
Thnx a lot bro and yeah i knw that ... Actually i'm gonna start installing roms so in case if it goes wrong i just a needed reliable method to get back on stock company's software ....
Thnx again bro
Sent from my YU5010 using Tapatalk
nickjones1007 said:
Thnx a lot bro and yeah i knw that ... Actually i'm gonna start installing roms so in case if it goes wrong i just a needed reliable method to get back on stock company's software ....
Thnx again bro
Sent from my YU5010 using Tapatalk
Click to expand...
Click to collapse
its reliable bro and worked for me when i screwed my phone. But note one thing that you should have installed the adb drivers properly on your computer. Anyway if u screwed up don't hesitate to discuss here.
When i start the flashall.bat the phone restarts and stuck back at the cyanogen logo..!
goudaniket said:
When i start the flashall.bat the phone restarts and stuck back at the cyanogen logo..!
Click to expand...
Click to collapse
Is driver properly installed? Or retry to download setup again if you have done right then
1. boot into bootloader
2. run bat file it will take some time. If all goes well then it will say about relocking of boot-loader.
3. seletct yes and restart.
4. you will see yu logo and it will take 10-15 minutes to load so stay calm! If it doesn't load then try again.
awesome... worked for me
maazkazi91 said:
awesome... worked for me
Click to expand...
Click to collapse
You can simply hit the thanks buttton bro
Can u remember me?
I can't root my YU 5010a
ankityu said:
I can't root my YU 5010a
Click to expand...
Click to collapse
I think you have issue with adb driver .. Is that resolved?
No man
...its still stuck in there..
ankityu said:
No man
...its still stuck in there..
Click to expand...
Click to collapse
Bro i hv updated the thread with steps to install adb drivers. Try it and then report if it works.
What is signed fastboot
ankityu said:
What is signed fastboot
Click to expand...
Click to collapse
Install it . these are the drivers.
Hello Guys,
Today I am going to assist you on rooting your HTC Desire 826 (All Models).
We will be using the conventional method of rooting i.e. flashing SuperSU through recovery. Just follow my steps carefully
and you will root your device successfully without any mess....
Note : The first TWRP recovery made for this device was not perfect. After installing the recovery the touch wasn't working on some models.....However in this post I have provided the Chinese Mod of that TWRP recovery... This works in all models of HTC Desire 826....Thanks to the Chinese guy whose modified the recovery... Don't worry, the recovery is in English, only installation is Chinese and that to only 2 steps which I will explain in this post.
Alert: I am not responsible for any kind of brick(hard or soft) that your device may suffer during this procedure...This method is full proofed but only when you follow it as mentioned...So proceed at your own risk.
1. Installing all necessary drivers
The first step is to install proper drivers for your device on PC. I would recommend to download and install HTC Sync Manager and connect your device to PC...HTC Sync Manager will automatically install all the required drivers that we need for our process...
You can download it from the below link..
https://www.mediafire.com/?m5xcho7w534p936
2. Download Minimal ADB Tools
Now download the adb tools required for our process from the below link
https://www.mediafire.com/folder/483igl8a45dy2/adb
3. Unlock your Bootloader (Very Important)
This step is must.....You have to unlock your bootloader before proceeding further.....
Warning : Unlocking your bootloader will void your software warranty...Also after unlocking the bootloader, the device will be reset... So do backup all your important data from internal memory to sd card or to pc.
You can use 2 methods to unlock your bootloader..
1. By using kingo bootloader unlock... Download it from here http://www.mediafire.com/download/221m4bgsptnmhgj/HTC_Bootloader_Unlock.exe
Download and install this software... Now Connect your phone to PC....Make sure USB Debugging is enabled on your device...Now open Kingo Bootloader Unlock...The software will automatically detect your device....Click on Unlock...It will unlock your phone's bootloader automatically and you're ready to go.....
2. By using HTC's official unlock method...
If the above method fails then goto http://www.htcdev.com/ and create an account and then follow the steps given there to unlock your bootloader.....
Note : This process includes a step where you need to download adb files....No need to download from there....The link for adb files provided by me are sufficient. Just proceed the steps using those adb files.
Now download SuperSU zip by Chainfire from the below link and place the file in your internal memory
http://www.supersu.com/download
Please download the latest zip file and not the apk file.
Important : Go on the above link and Download the latest flashable zip file otherwise you will suffer a bootloop and your device will be stuck on HTC logo
4. Installing TWRP recovery
After you have successfully unlocked your device's bootloader, u need to install the TWRP recovery.
Download the TWRP recovery from here .... https://www.mediafire.com/?hn2j75fxj6hkj9w
Step 1 : Goto Fasboot USB mode
Connect your device to PC.
Open the adb folder downloaded before. While holding the shift key, right click anywhere on the white space inside the folder...
You will see an option namely - Open command prompt here
Click on that........Now type the following command in the cmd window that opens up...
adb reboot bootloader
This will boot your device to bootloader mode...Make sure it says "bootloader usb" there.
Step 2 : Install TWRP
Now double click and open the twrp file downloaded previously.....A command promt will open up with something written in Chinese... Press Enter twice and the twrp recovery will be pushed to your device.....
Done...You have succesfully installed TWRP recovery on your device.
5. Flashing SuperSU
Now disconnect your device from pc....From "fastboot" mode use the up/down volume button to navigate to "hboot" option and press power button to goto "hboot" menu...From there goto "recovery" option and press power button to enter the recovery menu...
TWRP recovery will open up....
On the first screen you will see a warning....Just ignore that and goto the bottom where its written "Swipe to Allow Modifications" and swipe right.
Now a menu will come up...
Select the first option i.e Install
Now Search the SuperSU.zip file in your internal memory that you downloaded previously and select it.
Recovery will flash the zip file.
Now reboot your device.....
Hurrah! Your device is successfully rooted
Goto App launcher and check if there is SuperSU app there. If yes then your device is succesfully rooted.
To verify whether your device is properly rooted, download the root checker app from play store....
If you have any doubts regarding this post, do post your replies so that I can resolve them.
This thread has been started for HTC Desire 826 Device......
If you have any news or mods regarding this device or any custom ROM, feel free to share with everyone via this post.....
Hit THANKS button if I helped you or if you liked my post.
after instaling supersu ... phone is not booting it is hanging in htc screen
karth83 said:
after instaling supersu ... phone is not booting it is hanging in htc screen
Click to expand...
Click to collapse
got the stock rom back with the help of gsmdevelopers forum
karth83 said:
got the stock rom back with the help of gsmdevelopers forum
Click to expand...
Click to collapse
Now is your phone rooted?
Ishan16 said:
Now is your phone rooted?
Click to expand...
Click to collapse
no it is back to stock. atleast i m happy for phone working
can i borrow acc in htcdev ?
pokemon_2201 said:
can i borrow acc in htcdev ?
Click to expand...
Click to collapse
you can easily create, what happened?
Ishan16 said:
Hello Guys,
Today I am going to assist you on rooting your HTC Desire 826 (All Models).
We will be using the conventional method of rooting i.e. flashing SuperSU through recovery. Just follow my steps carefully
and you will root your device successfully without any mess....
Note : The first TWRP recovery made for this device was not perfect. After installing the recovery the touch wasn't working on some models.....However in this post I have provided the Chinese Mod of that TWRP recovery... This works in all models of HTC Desire 826....Thanks to the Chinese guy whose modified the recovery... Don't worry, the recovery is in English, only installation is Chinese and that to only 2 steps which I will explain in this post.
Alert: I am not responsible for any kind of brick(hard or soft) that your device may suffer during this procedure...This method is full proofed but only when you follow it as mentioned...So proceed at your own risk.
1. Installing all necessary drivers
The first step is to install proper drivers for your device on PC. I would recommend to download and install HTC Sync Manager and connect your device to PC...HTC Sync Manager will automatically install all the required drivers that we need for our process...
You can download it from the below link..
https://www.mediafire.com/?m5xcho7w534p936
2. Download Minimal ADB Tools
Now download the adb tools required for our process from the below link
https://www.mediafire.com/folder/483igl8a45dy2/adb
3. Unlock your Bootloader (Very Important)
This step is must.....You have to unlock your bootloader before proceeding further.....
Warning : Unlocking your bootloader will void your software warranty...Also after unlocking the bootloader, the device will be reset... So do backup all your important data from internal memory to sd card or to pc.
You can use 2 methods to unlock your bootloader..
1. By using kingo bootloader unlock... Download it from here http://www.mediafire.com/download/221m4bgsptnmhgj/HTC_Bootloader_Unlock.exe
Download and install this software... Now Connect your phone to PC....Make sure USB Debugging is enabled on your device...Now open Kingo Bootloader Unlock...The software will automatically detect your device....Click on Unlock...It will unlock your phone's bootloader automatically and you're ready to go.....
2. By using HTC's official unlock method...
If the above method fails then goto http://www.htcdev.com/ and create an account and then follow the steps given there to unlock your bootloader.....
Note : This process includes a step where you need to download adb files....No need to download from there....The link for adb files provided by me are sufficient. Just proceed the steps using those adb files.
Now download SuperSU zip by Chainfire from the below link and place the file in your internal memory
https://www.mediafire.com/?62mm4vg153a8jzf
4. Installing TWRP recovery
After you have successfully unlocked your device's bootloader, u need to install the TWRP recovery.
Download the TWRP recovery from here .... https://www.mediafire.com/?hn2j75fxj6hkj9w
Step 1 : Goto Fasboot USB mode
Connect your device to PC.
Open the adb folder downloaded before. While holding the shift key, right click anywhere on the white space inside the folder...
You will see an option namely - Open command prompt here
Click on that........Now type the following command in the cmd window that opens up...
adb reboot bootloader
This will boot your device to bootloader mode...Make sure it says "bootloader usb" there.
Step 2 : Install TWRP
Now double click and open the twrp file downloaded previously.....A command promt will open up with something written in Chinese... Press Enter twice and the twrp recovery will be pushed to your device.....
Done...You have succesfully installed TWRP recovery on your device.
5. Flashing SuperSU
Now disconnect your device from pc....From "fastboot" mode use the up/down volume button to navigate to "hboot" option and press power button to goto "hboot" menu...From there goto "recovery" option and press power button to enter the recovery menu...
TWRP recovery will open up....
On the first screen you will see a warning....Just ignore that and goto the bottom where its written "Swipe to Allow Modifications" and swipe right.
Now a menu will come up...
Select the first option i.e Install
Now Search the SuperSU.zip file in your internal memory that you downloaded previously and select it.
Recovery will flash the zip file.
Now reboot your device.....
Hurrah! Your device is successfully rooted
Goto App launcher and check if there is SuperSU app there. If yes then your device is succesfully rooted.
To verify whether your device is properly rooted, download the root checker app from play store....
If you have any doubts regarding this post, do post your replies so that I can resolve them.
This thread has been started for HTC Desire 826 Device......
If you have any news or mods regarding this device or any custom ROM, feel free to share with everyone via this post.....
Hit THANKS button if I helped you or if you liked my post.
Click to expand...
Click to collapse
It will work with marshmallow
saifsalee said:
It will work with marshmallow
Click to expand...
Click to collapse
Yes
thanks it`s working fine
Ishan16 said:
Yes
Click to expand...
Click to collapse
yes its working fine just we have to install latest supersu zip file
otherwise it will stuck on boot logo
note
karth83 said:
you can easily create, what happened?
Click to expand...
Click to collapse
I have big trouble to create acc
pokemon_2201 said:
I have big trouble to create acc
Click to expand...
Click to collapse
U have to just create account with your email address. Please explain the actual problem.
what device you have ? HTC D826 Dtul ?
success rate
Dont mind but what is the success rate and if anything happens then what shud i do to install stock ROM plus does it work on marshmellow
---------- Post added at 08:42 PM ---------- Previous post was at 08:37 PM ----------
saifsalee said:
yes its working fine just we have to install latest supersu zip file
otherwise it will stuck on boot logo
Click to expand...
Click to collapse
from where i can get latest supersu zip file
rahuld41 said:
Dont mind but what is the success rate and if anything happens then what shud i do to install stock ROM plus does it work on marshmellow
---------- Post added at 08:42 PM ---------- Previous post was at 08:37 PM ----------
from where i can get latest supersu zip file
Click to expand...
Click to collapse
it works 100%
just follow the link for updated SuperSU zip filee
https://forum.xda-developers.com/showthread.php?t=1538053
Hang on boot screen
karth83 said:
no it is back to stock. atleast i m happy for phone working
Click to expand...
Click to collapse
I got same problem with HTC desire 826 after fleshing supersu plz tel how to restore back
htc desire 826 root problem
karth83 said:
after instaling supersu ... phone is not booting it is hanging in htc screen
Click to expand...
Click to collapse
i have also same problem plz can you help me to solve this issue.
help me could not flash supersu
i Install the twrp and after that when i flash supersu zip file it say sucess but do not install supersu help me i try three times
I tried to root my phone using twrp. after i rooted it using TWRP my phone isnt turning on... its stuck on boot logo (HTC) I cant turn it off ? How can I turn it off ?
Boot loop
After flashing the superSU, I'm stuck in the HTC logo screen. I tried to hard reset the phone to enter the hdboot menu, but I failed, because it gets stuck in the logo screen again!
I'm literally freaking out!
Can you please help me? Neither hard reset nor soft reset is working and I don't know what to do.
please help
Rooting Guide for Doogee Y6-
So waiting time IS Now Finished , twrp is here,
Basic spec-
Ram - 2GB/4GB
Rom- 16GB/64GB
Camera- BACK- 13MP
FRONT- 8MP
Display- 5.5 INCH
OS -MARSHMALLOW
SoC -Mediatek MT6750
Hit Thanks if This Helpful For you:good:
Full Review Checkout HERE
Disclaimer
Code:
your Device At Least 50-60% Charge During Process
warranty Is now Void, Developers and We are Not Responsible For any Damage,
Backup your Personal Data and apps Before Doing anything
take a Nandroid Backup if possible
twrp Installation-
in Short-
Download twrp Sp Flash tools from Bellow Link
Install All Drivers On PC and Run SP tools
Load Scatter File and Check Recovery only
under recovery Section Load Downloaded twrp.img File
Then Click on Download, Connect your Phone to PC [make Sure Phone IS turned off]
Done,
Fastboot Guide-
Bootloader Must be Unlocked,
Code:
Code:
fastboot flash recovery recovery name.img
Rooting Guide-
Download Supersu.zip from Bellow and put into Root Of Sd Card
Boot Device into twrp [use command adb reboot bootloader] or hold power and volume up key on switch of mod
Allow Modification
make a nandroid backup
Click install Zip from sd crad
Locate Downloaded Supersu.zip file and Swipe to install
after Success go back and reboot system now
Done,
Downloads-
mod edit - blog links removed
Phone for stock on bootloop
Phone got stock on bootloop
Please, what can I do,my Doogee y6 could not boot properly again after flashing the above recovery image using sp flash tool.The device can boot into twrp recovery but can't boot back into the. If I flash I new custom ROM Will it be successful as when I Intend to restore in to factory setting, I got ' failed to Mount ' /nvcfg' in valid argument and then done afterwards. Kindly advice me on what to do please. Thank you.
TWRP language
I have question , i flushed twrp from uplink and now my twrp is not in english it is blody chinees language as it is not touch version of twrp....
any solution for this stuff... is it posible to flash maybe some other recovery so it gets english atleast ???
garabadz said:
I have question , i flushed twrp from uplink and now my twrp is not in english it is blody chinees language as it is not touch version of twrp....
any solution for this stuff... is it posible to flash maybe some other recovery so it gets english atleast ???
Click to expand...
Click to collapse
flash this one:
https://forum.xda-developers.com/showpost.php?p=69800037&postcount=3
it's the newest TWRP recovery for Y6 around
I guess you'll be ok
You don't "need" to root
...
chillo71 said:
flash this one:
https://forum.xda-developers.com/showpost.php?p=69800037&postcount=3
it's the newest TWRP recovery for Y6 around
I guess you'll be ok
You don't "need" to root
Click to expand...
Click to collapse
thx dude , but still only chinese 8 lines in old school look maybe i am not doing it well.. i do flash it all good with sptools
how do you enter to twrp?
garabadz said:
thx dude , but still only chinese 8 lines in old school look maybe i am not doing it well.. i do flash it all good with sptools
how do you enter to twrp?
Click to expand...
Click to collapse
oh now I got it, i think you go in the boot menu, all mediateks have that in Chinese
To get into recovery you must press up volume and then hold it along with pressing the power button,
Y6 after a few seconds turn;s on and you then have to chose which mode to go. Up volume to change selection and down volume to select, recovery mode obviously
chillo71 said:
oh now I got it, i think you go in the boot menu, all mediateks have that in Chinese
To get into recovery you must press up volume and then hold it along with pressing the power button,
Y6 after a few seconds turn;s on and you then have to chose which mode to go. Up volume to change selection and down volume to select, recovery mode obviously
Click to expand...
Click to collapse
after doing that i have =killed= android lieing on screen with red triangle.... under it it says =No command=
---------- Post added at 05:28 PM ---------- Previous post was at 04:58 PM ----------
So for new guys in this i skipped very important step when flashed twrp:
Do not run system , but to bootloader first , accept modifications and whoala...
thx @chillo for responding quickly
BTW The dying android means no custom recovery is installed for Y6 , no fastboot command whatsoever
And yes, Y6 and most new android phones from Marshmallow and newer *(edit: ) stock ROMs, don't like to mess with their system partition, one should select system as read-only
Glad you made it through and learned a bit of it
Bootloop
It appears I've soft-bricked my Y6.
I've installed TWRP 3.03 as above and can boot into it but when I try to do a normal reboot I'm stuck in a boot loop.
How do I get to this stage - "Do not run system , but to bootloader first , accept modifications and whoala..." Is that when you first run TWRP?
In the Mount section of TWRP "System" is not ticked but the button "Mount as readonly" is.
If I select Fastboot it hangs. Normal boot hangs. Boot into Recovery is fine.
Any suggestions?
Thanks in advance
Y6 Max:*install recovery with fastboot in Ubuntu Linux
Hello,
thank you for this very useful thread. Just want to add some information on installing the recovery image on the Doogee Y6 Max via fastboot in Ubuntu Linux
I've followed this instructions with some minor (but important)*changes.
First useful information:*to enter in the fastboot mode of the Y6 max do the follow:
- power off your phone
- push togheter Volume up and Power button
now you will see a menu with three options. Move the arrow with Volume up and select "fastboot". Then press Volume down.
You are now in fastboot mode.
Connect your phone via USB to the computer.
Open a terminal and:
- unlock OEM as described in the tutorial linked above.
- install your recovery.img as described in the tutorial linked above
- re-lock the OEM with this command:
Code:
sudo fastboot oem lock
otherwise your phone won't boot.
Then power off your phone and enter in the menu described above pressing toghether Volume up and Power.
Now select "Recovery" and you are done.
Hi! I did everything like in the tutorial but phone is stuck in bootloop after flashing supersu from sd card. Any advices?
I tried 3.0.3 twrp and newest supersu. Phone turned on but there is not root, also there were no errors during instalation.
This Method Is For Rooting Lyf Water 7 i.e LS-5504 running 6.0 android
Proceed At Your Own Risk I m Not Responsible For Any Damage To your Phone
To Begin Root Process First DOWNLOAD THESE FILES-
1. TWRP(working ported by me) Zippyshare Link
Mirror Mediafire link
2. Minimal ADB & Fasboot Tool for Android https://devsjournal.com/download-minimal-adb-fastboot-tool.html
3. Sp flash tool https://spflashtool.com/
4. Scatter files for our device https://www.mediafire.com/file/qy2be6cxv7e0j9r/MT6753~1.TXT/file Mirror - Zippyshare link
5. supersu zip Click here (this is property of chainfire all credits belong to them)
NOTE - Backup your contacts, messages and data in sd card or pc as it will be gone
Now follow instructions-
1. Install minimal ADB & Fastboot ( i prefer u install it in C:\ drive) Open the file named cmd. This will open a command prompt
2. Power off phone. Once it is off click volume up and power button together ,now screen will show a smalll menu/boot menu. Press volume up to move arrow to fastboot mode and select it by pressing volume down button. You will enter fastboot mode now.
3. Connect phone to pc using data cable. Come back to command prompt. Type this command.
PHP:
fastboot devices
it will show your device like 5DSOYL.. something like that
now type another command
PHP:
fastboot oem unlock
Now check your phone it will ask about unlocking bootloader press volume up key to agree
this will delete all data
after this type
PHP:
fastboot reboot
your bootloader is unlocked now
4. Keep device connected. once phone reboots, open Sp flash tool. select the scatter file (downloaded above) then on recovery tab select the recovery.img (download above). Click the download button and then power off your phone.
Twrp will be flashed, You can access it by Pressing volume up and power button together and selecting recovery in boot mode (where we selected fastboot mode)
5. To gain root just flash su zip through Twrp so simple
In case recovery don't get flashed there may be problem in sp flash tool drivers .. plz google how to install them
Still working in 2019, files updated to latest version and dead links replaced :good:
Any custom ROM available for this model?
I successfully rooted n installed TWRP recovery, now next step is to flash custom ROM so asking
DevanandaDS said:
Any custom ROM available for this model?
I successfully rooted n installed TWRP recovery, now next step is to flash custom ROM so asking
Click to expand...
Click to collapse
i have made one but not tested it yet....
i'll test it by tomorrow... if you want i can provide u the link
Yes Provide Me link i have to test that rom earlier.
ShaikhAaqib said:
i have made one but not tested it yet....
i'll test it by tomorrow... if you want i can provide u the link
Click to expand...
Click to collapse
Yes Provide Me link i have to test that rom earlier.
smit451 said:
Yes Provide Me link i have to test that rom earlier.
Click to expand...
Click to collapse
i will upload it tomorrow and give u the link bro...
Hello folks. Answering the questions above there is no custom rom for lyf water 7s. lyf water 7s don't has any sort of development on xda. I would advice not to mess around more then rooting because if you phone got hard brick (when it's stuck on logo) it won't be possible for you to flash it as sp flash tool will not recognize your device. Just get a new device.
MannyPanwar said:
Hello folks. Answering the questions above there is no custom rom for lyf water 7s. lyf water 7s don't has any sort of development on xda. I would advice not to mess around more then rooting because if you phone got hard brick (when it's stuck on logo) it won't be possible for you to flash it as sp flash tool will not recognize your device. Just get a new device.
Click to expand...
Click to collapse
true, but it is possible to port a rom for it, just that the procedure is difficult, since not many people use this device there is no development on this i guess..
i tried to port a rom... but i failed, i guess i did not unlock the BL... no idea.. it didn't go well..
Code:
[CENTER]If You Have Hard Bricked Your Device Then Only Use This Guide[/CENTER]
CPH1861EX_11.A.29
Files You Need To Download:
1:Miracle Box Tool-https://mega.nz/#!lVsQGSaC!6TTJopMyntMQA0IKYdC_5BlsxIjV_Ibhx2qWL_ZqDyI
2:Stock Rom- https://mega.nz/#F!ncMFUaaa!0fVNwJ_Io0EMFv8YLjBZlQ [Select Download As Zip]
3:https://androidmtk.com/install-android-cdc-driver-manually [Install Drivers Using This Guide]
Click to expand...
Click to collapse
Steps To Flash Stock Rom:
1:Install Miracle Box And Drivers
2:Launch Miracle Box
3: Open Mtk Tab
4:Click on Services
5:Select Write From The Available Options
6:Select 8th Boot From Boot Options
7:In Second Options,Select Oppo Realme 1
8:Check Skip Preloader File
9:Hit Start
10:Now connect your phone and hold volume and power buttons... It will flash and turn off your phone
11:Remove Cable And Press Power+VOLUME Up For 15 Seconds
You Have Unbricked Your Device
Click to expand...
Click to collapse
Credits:
Hamza(From Telegram Group For Writing The Tutorial0
Shobith(For Stock Rom Dump)
AnuragRai(For Simplifying The Guide)
1st link miracle box is not working plz correct it bro
can you share download links from other providers? mega asks for premium account.
thank you.
Didn't work for me
anurag rai said:
Code:
[CENTER]If You Have Hard Bricked Your Device Then Only Use This Guide[/CENTER]
CPH1861EX_11.A.29
Credits:
Hamza(From Telegram Group For Writing The Tutorial0
Shobith(For Stock Rom Dump)
AnuragRai(For Simplifying The Guide)
Click to expand...
Click to collapse
After flashing twrp recovery when I booted my device, a software update popped up and it automatically updated over night and my device hard bricked. I tried everything but couldn't fix it. My pc is not even recognising my phone so can't follow your steps. Any suggestion or help to fix my device will be appreciated.
same mine bro,
rom version was a31 and after installed twrp, my device hard bricked. i couldnt solve yet, waiting a newer version of miracle box or etc.
anurag rai said:
Code:
[CENTER]If You Have Hard Bricked Your Device Then Only Use This Guide[/CENTER]
CPH1861EX_11.A.29
Credits:
Hamza(From Telegram Group For Writing The Tutorial0
Shobith(For Stock Rom Dump)
AnuragRai(For Simplifying The Guide)
Click to expand...
Click to collapse
i dumped the stock rom bro @besttipsYT Not Shobith
this method is not working at this time...when i trying to flash by this method only show.......phone connected......downloding boot8....then disconnect my phone ..&reboot
Please don't flash custom recovery (here twrp) without proper knowledge or just sake of modding device. The builds and methods are not always working and may end up bricking your device.
Hi There, Can someone PLZ help me setting up OPPO PRELOADER Drivers correctly. Everytime i try to use miracle thunder i get the following log:
Waiting for USB Port...
Set USB Serial Device (COM9)
Connecting to Phone,Wait..
Connected to Phone.
CPU: MT6771 SW:0000 Ver: CA00
>>Downloading Boot8 ...
and it remains on here forever.
Actually oppo preloader shows for some time in pc and after that it goes away and hence it is not letting the miracle thunder work properly (i guess)
when my phone was working (booting in coloros 6, then also oppo preloader was doing the same thing and after a few seconds my battery would start charging), now i can't see anything on screen as it's bricked now.
Preloader doesn't even work with SP Flash Tools also.
EDIT : I have tried almost everything i knew, drivers manager add legacy option etc.
If someone could help me get out of this problem, i would really be grateful.
Brick Reason : Flashed TWRP but used fastboot command to boot into that : (
PLEASE HELP SOMEONE
Alen012 said:
Hi There, Can someone PLZ help me setting up OPPO PRELOADER Drivers correctly. Everytime i try to use miracle thunder i get the following log:
Waiting for USB Port...
Set USB Serial Device (COM9)
Connecting to Phone,Wait..
Connected to Phone.
CPU: MT6771 SW:0000 Ver: CA00
>>Downloading Boot8 ...
and it remains on here forever.
Actually oppo preloader shows for some time in pc and after that it goes away and hence it is not letting the miracle thunder work properly (i guess)
when my phone was working (booting in coloros 6, then also oppo preloader was doing the same thing and after a few seconds my battery would start charging), now i can't see anything on screen as it's bricked now.
Preloader doesn't even work with SP Flash Tools also.
EDIT : I have tried almost everything i knew, drivers manager add legacy option etc.
If someone could help me get out of this problem, i would really be grateful.
Brick Reason : Flashed TWRP but used fastboot command to boot into that : (
PLEASE HELP SOMEONE
Click to expand...
Click to collapse
Miracle box, SP Flash Tool and MTK Droid Tools no longer work with Realme. If you can access Fastboot then flash stock recovery and proceed further.
Bootloop if i try t access fastboot mode. Can go to recovery but its not allowing me to flash amything saying its an older version. Any work around yet?
Naveen56 said:
Miracle box, SP Flash Tool and MTK Droid Tools no longer work with Realme. If you can access Fastboot then flash stock recovery and proceed further.
Click to expand...
Click to collapse
StripsOfTatti said:
Bootloop if i try t access fastboot mode. Can go to recovery but its not allowing me to flash amything saying its an older version. Any work around yet?
Click to expand...
Click to collapse
Which recovery are you in? Is it Stock or Custom?
If u have stock first wipe data and then flash boot.img or ozip file (stock ROM).
If u have custom recovery then you need to flash stock recovery + stock ROM.
plz help me ihave realme 1 and it stuck in logo and orange state and restart over and over and icannot boot into recovery or fastboot plz help me
Simba Gaara said:
plz help me ihave realme 1 and it stuck in logo and orange state and restart over and over and icannot boot into recovery or fastboot plz help me
Click to expand...
Click to collapse
If recovery and fastboot are inaccessible means you need to visit service center.
When trying to connect realme 1 to miracle it showing usb device not connected, how to solve this? Drivers are installed
Naveen56 said:
Miracle box, SP Flash Tool and MTK Droid Tools no longer work with Realme. If you can access Fastboot then flash stock recovery and proceed further.
Click to expand...
Click to collapse
So bro in case if I brick my phone then I can flash stock rom using stock recovery.......??
Do I get those Rom files from official realme website?
AwesomeVk47 said:
So bro in case if I brick my phone then I can flash stock rom using stock recovery.......??
Do I get those Rom files from official realme website?
Click to expand...
Click to collapse
Yes. Do remember you need both fastboot and recovery to be working, so you can flash Stock Recovery (only if you have TWRP installed).
If you have stock recovery installed then download stock rom from official Realme site and place it in the Sdcard (otg wont help). Enter into recovery and update/install the ozip.
If your phone is completely dead then above method wont help and you have to follow another one.
Note: If your device is rooted then installing (from stock recovery) stock rom fails. At this time flash TWRP from fastboot then flash zip file (convert stock rom from ozip to zip).
Naveen56 said:
Yes. Do remember you need both fastboot and recovery to be working, so you can flash Stock Recovery (only if you have TWRP installed).
If you have stock recovery installed then download stock rom from official Realme site and place it in the Sdcard (otg wont help). Enter into recovery and update/install the ozip.
If your phone is completely dead then above method wont help and you have to follow another one.
Note: If your device is rooted then installing (from stock recovery) stock rom fails. At this time flash TWRP from fastboot then flash zip file (convert stock rom from ozip to zip).
Click to expand...
Click to collapse
Sorry to bother you bro but let's say I bricked my phone and have twrp installed......where will I get the stock recovery from and how to enter the fastboot mode of realme phone if it's bricked
AwesomeVk47 said:
Sorry to bother you bro but let's say I bricked my phone and have twrp installed......where will I get the stock recovery from and how to enter the fastboot mode of realme phone if it's bricked
Click to expand...
Click to collapse
Download stock recovery.
Enter fastboot mode using Power + Volume Down. If that does not work use other combinations.
Now flash stock recovery.
Enter recovery using
Code:
fastboot oem reboot-recovery
Install ozip.
Naveen56 said:
Download stock recovery.
Enter fastboot mode using Power + Volume Down. If that does not work use other combinations.
Now flash stock recovery.
Enter recovery using
Install ozip.
Click to expand...
Click to collapse
Is that link for realme 1 stock recovery?.......it would be great help if you could tell me how to obtain it....just for future use
---------- Post added at 03:18 PM ---------- Previous post was at 03:07 PM ----------
Naveen56 said:
Download stock recovery.
Enter fastboot mode using Power + Volume Down. If that does not work use other combinations.
Now flash stock recovery.
Enter recovery using
Install ozip.
Click to expand...
Click to collapse
Will this link work for stock rom file?
Link1
https://www.realme.com/in/support/software-update
Link2
https://www.getdroidtips.com/oppo-realme-1-stock-firmware-collections/
Which one of these should I use?