Database Info

Leagoo Lead 3 root

I got root on my Leagoo Lead 3 using the following method a user had for his Leagoo Lead 1.
http://forum.xda-developers.com/showpost.php?p=54321112&postcount=3
Edit: skip the first step and only proceed to step two. Your device will try to boot into fastboot once or twice. When that's done, open mtk uncle tools on your device and then head into engineering mode and click root in the user/root menu.
Hope this helps anyone who needs root.

Root failed for me
Hi rukusx7
In my case it has failed... can you help me, please?
My phone had installed X applications, google account... prior to root...
Fisrt Step: Bootloader unlock...finish OK
When I run button of Bootloader unlock my mobile init in mode fastboot, make tasks and finish ok and mobile still in fastboot mode​
Next Step: KingoRoot.... finish Failed.
When I run kingoroot, my mobile is in mode fastboot ¿it's ok?...make tasks and after a long time finish with failed​My sencond attempt is to run kingroot with my mobile ON as usual but kingoroot failed too..​
I think my problem is the step 1. How can I check the step 1 is correct?
Thanks in advanced for your help.

I really messed up with explaining myself on that. I really have NO idea how any of that root guide worked for me.... I completely omitted the first step. I'm truly sorry if my misinformation has caused you any troubles.
Start sony bootloader unlocker and run it with your phone connected.
It will restart your phone to fastboot and then it remains idle.
Keep your phone plugged in, switch it off and boot manually into the fastboot (power + vol up)
From here the unlocker will proceed unlocking.
Step 1 done.
Click to expand...
Click to collapse
This is the only part of the tutorial I followed.
Now open kingosoft root connect the phone and let it do its thing.
At restart of the phone kingosoft will show on screen a message like "checking root status"
Launch mtk uncle and enter engineer mode.
Go to log and debugging tab ans select user2root
Select Root.
Now kingosoft will tell you that root is succesfull and restarts the phone.
Click to expand...
Click to collapse
I'm not even sure the bootloader is locked at all....

Hi.
Don`t worry ... just has not been rooted (failed with Kingoroot and Vroot (this app say Yes but really isn`t rooted..),
My mobile is ok
Regards.

root
Hi
I also have Leagoo Lead 3 and i successfully rooted the phone. First step finished OK, but on second step with Kingo Android Root i had a problem
At restart of the phone kingosoft will show on screen a message like "checking root status"
Launch mtk uncle and enter engineer mode.
Go to log and debugging tab ans select user2root
Select Root.
Now kingosoft will tell you that root is succesfull and restarts the phone.
Click to expand...
Click to collapse
I selected root but nothing happened, it continued to say "checking root status", "connecting to device" and it took lot of time so i closed the program to start again but then i had another problem. It didn't want to connect with device, it tried and tried but without success.
-- my steps --
- When i started Kingo Android Root for first time it downloaded HTC driver so i downloaded latest driver HTCDriver_4.2.0.001.exe ( [DRIVERS] Latest HTC Drivers [4.2.0.001] )
- I rebooted the PC ( now i don't have unknown device in Device Manager)
- On phone launch MTK Uncle and select User (on my phone it is = ENGINEER MODE/ENGINEER MODE (MTK)/LOG AND DEBUGGING/USER2ROOT/USER)
- Go to Settings / Developer Options and turn on USB Debugging (if it is already turned on, turn it off and then turn it on again)
- Start Kingo Android Root, connect phone to PC ( try to use usb cable that came with mobile phone ) and do everything like in step 2
Now open kingosoft root connect the phone and let it do its thing.
At restart of the phone kingosoft will show on screen a message like "checking root status"
Launch mtk uncle and enter engineer mode.
Go to log and debugging tab ans select user2root
Select Root.
Now kingosoft will tell you that root is succesfull and restarts the phone.
Click to expand...
Click to collapse
If it cant establish connection with phone try to reboot the phone ( don't unplug the phone from PC ) and when it reboots, check again if USB Debugging is turn ON.
I rooted my phone at second attempt but that doesn't means that it would work for everybody or that this steps are needed.

Yeah, it took me a few attempts to be honest. I also used a data cable from my oneplus one.
I'm happy there are more people to help with this, so we can get some proper root instructions.
Also new firmware is on their site. I know nothing about mtk devices. How can I flash it if I can't find how to get into fastboot mode manually? (Why I omitted first step)
Edit: Quick Reboot from playstore will boot into fastboot mode for you!
Sent from my One.....mmmm... bacon.

Leago Lead 3
-- On my phone (when is turned off ) if i press ( vol+ ) and then ( power ) key it will enter recovery but in recovery menu, ( power ) key doesn't work.
I can only go down with ( vol- ) and select with ( vol+ ).
-- If i press ( vol- ) and ( power ) key *(when is turned off)* i will enter something similar to recovery, but everything is on Chinese language.
Here i can go up and down through the menu and select with ( power ) key.
I only know that word at the bottom means EXIT.
I also don't know how to flash, i think we need to use SP Flash Tool or MTKDroidTools but they look complicated.

Successfully installed Carliv custom recovery. You need root first though.
[PORT][RECOVERY] Carliv Touch Recovery v-1.5 for porting to all MTK phones
You need Default [UTIL][WIN][MT65xx] MTK Droid Root & Tools | MediaTek Android Smartphone
I didn't manually do the work. I used the automated porting tool. But to get root shell, I had to run the MTK tools. It notifies you that it can get you root shell by clicking root. Then you run CTRv-1.4 (the automated porting tool) and it can gain root shell access now. It automates everything and boots you into the new CWM.
By this point, if you can get root, you should have everything you need. I installed adb using
[TOOL] [WINDOWS] ADB, Fastboot and Drivers - 15 seconds ADB Installer v1.3

I've also semi deciphered the Chinese menu. So from the first menu entry.
1. Testing
2. Testing
3. Testing
4. Testing
5. Test Report
6. WIPE eMMC
7. INFO
8. INFO
9. Reboot
10. Power Off

Just tried out Philz Recovery as well. Works like a charm.

rukusx7 said:
Just tried out Philz Recovery as well. Works like a charm.
Click to expand...
Click to collapse
Do you have a link to the recovery you used?

vampirefo said:
Do you have a link to the recovery you used?
Click to expand...
Click to collapse
A Google search brought this up as the first link.
http://forum.xda-developers.com/showthread.php?t=2201860
You can build your own custom philz with either the recovery.IMG from your own phone or you can choose one manually. Leagoo has updated firmware for this device on their website. I suggest an update first then root and then recovery.
Sent from my One.....mmmm... bacon.

rukusx7 said:
A Google search brought this up as the first link.
http://forum.xda-developers.com/showthread.php?t=2201860
You can build your own custom philz with either the recovery.IMG from your own phone or you can choose one manually. Leagoo has updated firmware for this device on their website. I suggest an update first then root and then recovery.
Sent from my One.....mmmm... bacon.
Click to expand...
Click to collapse
Can you upload the version of phil's recovery you used?

vampirefo said:
Can you upload the version of phil's recovery you used?
Click to expand...
Click to collapse
Try this link instead. I meant to link here earlier, but linked you directly to Philz instead. This link has a Windows app which allows you to make your own philz recovery.
Easy Magic PhilZ Touch Installer for MediaTek Devices ONLY

Unlock failed
I'm stuck at unlocking. Mobile is in fastboot, Fetching Unlock Data (on sony bootloader unlock) but nothing. It's been like this for 40 min. Can you help me with this problem ?

eldar123 said:
I'm stuck at unlocking. Mobile is in fastboot, Fetching Unlock Data (on sony bootloader unlock) but nothing. It's been like this for 40 min. Can you help me with this problem ?
Click to expand...
Click to collapse
No need to unlock bootloader. Install mobile uncle tools from play store to device. Pick your favorite rooting tool. I used kingo root. Run kingo root. The app will try to reboot the phone for some fastbook work, when this fails, it will boot back into android. This is where you open mtk uncle tools, head into MTK engineering mode, scroll right until you see user/root. Tap that to choose root and the rooting tool will continue.
Sent from my One.....mmmm... bacon.

rukusx7 said:
No need to unlock bootloader. Install mobile uncle tools from play store to device. Pick your favorite rooting tool. I used kingo root. Run kingo root. The app will try to reboot the phone for some fastbook work, when this fails, it will boot back into android. This is where you open mtk uncle tools, head into MTK engineering mode, scroll right until you see user/root. Tap that to choose root and the rooting tool will continue.
Sent from my One.....mmmm... bacon.
Click to expand...
Click to collapse
No, didn't help.I've done what you told me and nothing's happening. Any other ideas ?

eldar123 said:
No, didn't help.I've done what you told me and nothing's happening. Any other ideas ?
Click to expand...
Click to collapse
I don't know where to help you. What status is your device in? Are we starting back from scratch?
Sorry my guides are terrible, I just found device easy to root and didn't foresee problem for others. I also did a lot of my own research and imagine you would have too before embarking.
Sent from my One.....mmmm... bacon.

I've uploaded my philz touch I "made". I used Easy Magic Philz Installer for mtk devices to get it done.
philz_touch_6.56.2_lead3.img
You can try flashing with flashify from the playstore, or I used the SP_flash tool. You just uncheck what you dont want to flash.
This is where things get good for you. In philz recovery, you can use the built in tool found in the Advanced Menu to Re-root the system. Once completed, reboot and install supersu from the playstore, it will notify you to install the su binary. Reboot and you should have root. Or at least I did.
I used this method AFTER applying the update on the Leagoo website. Which I highly recommend before ANY updates. all updates go OTA after this release. NO idea if update will work after rooting your device or installing CWM.

For using flashify the phone need to be rooted. I started the process with SP_flash tool and nothing, not even 1 %, it's been like this for hours. I tryed every method for rooting and flashing ROM that I could find on internet. I'm starting to be hopeless. Can you upload me you're backup file. I think that i could put it on SD CARD and restore phone to your backup file.

[Soft Brick] [Flash Stock] [Recovery] [ADB Driver] Yuphoria [Solution]

Soft Bricking ?
Phone starts and stuck on the Yu logo.
Hard Bricking?
Phone does not start even if the battery is full. Have to go to the service center.
[Note]
1.Make sure that you have 70-80% battery on your phone.
2.You need a PC and a USB cable to connect your phone to the PC.
3.Flashing the factory firmware will wipe all the data present in the internal memory. So, make a backup of that if you can.
[Required Downloads]
1.Download the flash tools.
2. Download the factory firmware (signed fastboot)
3. adb setup drivers.
4. Mirror for drivers manual install here.
5. You can use this tool performs various functions.
# [Install Adb Derives Manually]
1. First of all extract the downloaded file and save it in the computer.
2. Before installation you have to disable the "signature verification" in windows. In windowa 8 or 10 you can do it by going to advanced settings or you can google the way of disabling signature verification.
3. After that turn off the phone and connect it pressing vol up that it will boot in fastboot mode.
4. When you connect the phone go device manager and search for device connected showing error sign.
5. Now click on that device and check for deriver update.
6. Now select the deriver in computer not automatically and select all devices.
7. Now select "have disk"
8. Browse the folder where you had extracted the adb drivers.
9. Now select the drivers file and install.
10. Ignores the Warning and select "always allow"
11. When finished check the device again by connecting to computer in fastboot mode with usb.
# [Flash Factory Firmware]
Steps
1. Extract the flashtools zip in a new folder on the desktop.
2. Extract the factory firmware zip in the same folder and make sure that all of the flashtools files are also present.
3. Now, power off your phone. If you are stuck in a bootloop, then pull out the battery and reinsert it. (Do not switch on the phone.)
4. While pressing the Volume Up key, connect your phone to the PC with the help of a USB cable.
5. You should now see the fastboot logo on your device. If you did, leave the Volume Up key. (If you do not see the logo, retry the process.)
6. Now go to the folder where you extracted the flash tools and factory firmware and run the flash-all.bat by double clicking on it.
7. A command window will open and the flashing procedure will start. (Make sure that your device does not disconnect from your PC during the procedure.)
8. The command window will automatically close once the procedure is completed.
9. Disconnect your device and boot it up by pressing the Power button. The first boot might take around 5-10 minutes to complete.
Congrats!
# [Recovey Installation (Very Easy Method)]
Note
1. Phone must has unlocked bootloader.
2. It must be rooted.
Steps
1. Download the twrp.img file and place it into your phone storage.( you can choose any custom recovery)
2. Now download the app from playstore flashify
3. Now install it and open the app it will require permission for root access, allow the root access.
4. Now open the app and u can backup the current recovery.
5. Now select the "flash" menu and select the "recovry image" and choose the .img file from storage.
6. Then select yes for flashing warning and will says flashing recovery. After completion it will say flash completed.
7. Now select the option button on right top corner and select the reboot into recovery.
8. Now it will reboot into recovery.
Hit "Thanks" if found this thread helpful....​

Thanks for the solution...... it works well !!
Though my yuphoria was working perfectly fine, i wanted to factory reset my mobile for some reasons, which i was not able to do. Both soft and hard custom recovery options were not working (no recovery screen pop up, mobile boots and stuck at YU logo ), tried your solution and it worked.
Just one input for new users like me, where you have asked users to install adb drivers, i tried that part but on running the bat file, the device was not detected, hence had to add yuphoria device drivers from their official site, i am not able to paste the link here but file name is YUPHORIA_drivers-v1.0.zip, also USB debugging option needs to be turned on in developer option for this solution to work.
Rest all steps work exact as you explained.

Sahilsharma said:
Though my yuphoria was working perfectly fine, i wanted to factory reset my mobile for some reasons, which i was not able to do. Both soft and hard custom recovery options were not working (no recovery screen pop up, mobile boots and stuck at YU logo ), tried your solution and it worked.
Just one input for new users like me, where you have asked users to install adb drivers, i tried that part but on running the bat file, the device was not detected, hence had to add yuphoria device drivers from their official site, i am not able to paste the link here but file name is YUPHORIA_drivers-v1.0.zip, also USB debugging option needs to be turned on in developer option for this solution to work.
Rest all steps work exact as you explained.
Click to expand...
Click to collapse
Yup bro its difficult to set bootloader driver for yuphoria. But you can install it manually. But always remember to "disable driver signature verification" before installation and i will update the derivers link for manual installation if you message me the link.

will this work on unlocked bootloader

nickjones1007 said:
will this work on unlocked bootloader
Click to expand...
Click to collapse
"yup"... it will work. There is nothing to do with boot loader. It will flash the stock rom and boot-loader will get locked again. You have to unlock the boot-loader again if you want to flash custom rom again.

And i will get the official ota updates from YU as well ?
Sent from my YU5010 using Tapatalk

nickjones1007 said:
And i will get the official ota updates from YU as well ?
Sent from my YU5010 using Tapatalk
Click to expand...
Click to collapse
yep bro.. you will get the updates and i don't think you know that, there are no restrictions for unlocking/locking boot-loader of YU mobile. I mean the warranty not void if you unlock the boot-loader.

Thnx a lot bro and yeah i knw that ... Actually i'm gonna start installing roms so in case if it goes wrong i just a needed reliable method to get back on stock company's software ....
Thnx again bro
Sent from my YU5010 using Tapatalk

nickjones1007 said:
Thnx a lot bro and yeah i knw that ... Actually i'm gonna start installing roms so in case if it goes wrong i just a needed reliable method to get back on stock company's software ....
Thnx again bro
Sent from my YU5010 using Tapatalk
Click to expand...
Click to collapse
its reliable bro and worked for me when i screwed my phone. But note one thing that you should have installed the adb drivers properly on your computer. Anyway if u screwed up don't hesitate to discuss here.

When i start the flashall.bat the phone restarts and stuck back at the cyanogen logo..!

goudaniket said:
When i start the flashall.bat the phone restarts and stuck back at the cyanogen logo..!
Click to expand...
Click to collapse
Is driver properly installed? Or retry to download setup again if you have done right then
1. boot into bootloader
2. run bat file it will take some time. If all goes well then it will say about relocking of boot-loader.
3. seletct yes and restart.
4. you will see yu logo and it will take 10-15 minutes to load so stay calm! If it doesn't load then try again.

awesome... worked for me

maazkazi91 said:
awesome... worked for me
Click to expand...
Click to collapse
You can simply hit the thanks buttton bro

Can u remember me?

I can't root my YU 5010a

ankityu said:
I can't root my YU 5010a
Click to expand...
Click to collapse
I think you have issue with adb driver .. Is that resolved?

No man
...its still stuck in there..

ankityu said:
No man
...its still stuck in there..
Click to expand...
Click to collapse
Bro i hv updated the thread with steps to install adb drivers. Try it and then report if it works.

What is signed fastboot

ankityu said:
What is signed fastboot
Click to expand...
Click to collapse
Install it . these are the drivers.

Desperate for a Root Method for my P8 Max

Hi all,
Well I love my phone, just love it! BUT having bought it from China, like many I am stuck with the Chinese Model and firmware. Huawei Australia have assisted in unlocking the bootloader, now I am ready to root the phone. BUT, I have not had any luck sourcing a root method for it. Can someone please PLEASE help.
I am desperate as it keeps booting me out of Google Play Services, rendering my Huawei watch useless (ironic huh)
Any help would be appreciated. Email me if you like [email protected]
Michael

flash twrp recovery and install root with it very easy way

A Big Thank You and....
rowihel2012 said:
flash twrp recovery and install root with it very easy way
Click to expand...
Click to collapse
That sounds to easy, only question, how do I do that? Is there an instruction manual or guidance anywhere?
I have flashed other phones in the past but this one is stumping me.
I have looked for some of these methods only to be completing surveys that inundate me with spam and phone calls, only to be left without the downloads that I needed. Did I mention how much I love my phone?
Thanks again
Michael

Managed to root my phone.. even when I have updated the EMUI to B018, but there was an issue.. I tell you below
Step I follow from Chinese Forum below...
Preparation step :
1. download the tools from
https://www.mediafire.com/?9drsdo2f6hn4j34
2. Extract the content to your local. Note there are two folders :
- Folder 1 is for the tool that contains the TWRP recovery.img and the adb/fastboot tool,
- Folder 2 is for the original recovery
3. Copy the SuperSU zip to your phone (either in internal or external memory of your phone)
Installation step :
Step 0, unlock your bootloader (search around on how to do it)
1. Since I am using mac, somehow I don't need to install any driver, but if you using windows, install all the driver yourself
2. Enable the developer mode in your phone, and after that enable the usb debugging
3. Turn off your phone, and boot to fastboot (in off mode, connect the phone with your PC then press Volume Up and Power Button together)
4. Since now your phone has been connected to the PC, go to that Tool folder in respective of your OS, then overwrite the recovery with TWRP with fastboot command (install custom recovery) *note : for mac just add "./" in every command
- check the whether its connected : fastboot devices
- install TWRP : fastboot flash recovery recovery.img
5. Restart your phone and boot to recovery
- restart : fastboot reboot
- after reboot, turn off your phone
- reboot to recovery : turn on your phone by holding Volume Down with Power button
- Now you are at TWRP
6. Install SuperSU (root)
- Install SuperSU zip that has already been copied to your phone using TWRP (use the Install mode)
7. Reboot the phone
- Use reboot function in twrp
8. Profit
Theoritically the above things works but I have some issues following the above :
- After step 4, after recovery being flashed with TWRP seems like my phone Boot Partition is being overwritten too
- So when I rebooted the phone, it boot to TWRP instead
- So I tried to re-flashed the recovery with the original EMUI rom recovery (go to the folder "2.P8Max_Official_Recovery(For_restoration)" to find the original recovery.img). Also note that in the this folder, the adb and fastboot is only for mac. The one for windows use it in the tools
- This is done by going to fastboot again, then do command : fastboot flash recovery recovery.img
- This time using the original recovery
- Now when I rebooted the phone, it goes to EMUI recovery, then I just clicked restart to system or something
- After this, everything fixed, and I have SuperSU install and phone rooted
You can follow the above, but do it at your own risk, I am not responsible if your phone brick hehehe..
Original chinese forum is here : http://cn.club.vmall.com/thread-4919441-1-1.html
Click to expand...
Click to collapse
1 min Search

michaeldanielbourke said:
That sounds to easy, only question, how do I do that? Is there an instruction manual or guidance anywhere?
I have flashed other phones in the past but this one is stumping me.
I have looked for some of these methods only to be completing surveys that inundate me with spam and phone calls, only to be left without the downloads that I needed. Did I mention how much I love my phone?
Thanks again
Michael
Click to expand...
Click to collapse
just flash this recovery with fastboot
https://dl.twrp.me/p8/twrp-2.8.7.1-p8.img
fastboot flash recovery twrp-2.8.7.1-p8.img
then enter the recovery with hold power+volume up
install this file with install zip from twrp
https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip?retrieve_file=1
now you have root
very easy

rowihel2012 said:
just flash this recovery with fastboot
https://dl.twrp.me/p8/twrp-2.8.7.1-p8.img
fastboot flash recovery twrp-2.8.7.1-p8.img
then enter the recovery with hold power+volume up
install this file with install zip from twrp
https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip?retrieve_file=1
now you have root
very easy
Click to expand...
Click to collapse
I am so so sorry and a little embarrassed to ask this.
1. I am using the And it sees my phone
2. I am not sure how to fastboot.
3. Do I install the file "install this file with install zip from twrp" onto my device? (p8 max)
Again, I thank you.

michaeldanielbourke said:
I am so so sorry and a little embarrassed to ask this.
1. I am using the And it sees my phone
2. I am not sure how to fastboot.
3. Do I install the file "install this file with install zip from twrp" onto my device? (p8 max)
Again, I thank you.
Click to expand...
Click to collapse
1-shut down the phone
2-connect the usb cable with holding volume down .now you will be in bootloader
3-open cmd command in windows
4-type (fastboot flash recovery recovery.img (you must before rename the recovery file to recovery.img)
5-now after flashing the recovery .hold power+volume up to enter recovery
6-then install the root zip file
7-reboot the phone

You are so so helpful.
rowihel2012 said:
1-shut down the phone
2-connect the usb cable with holding volume down .now you will be in bootloader
3-open cmd command in windows
4-type (fastboot flash recovery recovery.img (you must before rename the recovery file to recovery.img)
5-now after flashing the recovery .hold power+volume up to enter recovery
6-then install the root zip file
7-reboot the phone
Click to expand...
Click to collapse
I will try this when i get home. I am always confused by the process. I am to old for all of this
Michael

BTW you will get in a Bootloop if your dont know how to exit I would not root your phone!

Sadly, this does not work for me. I did everything you suggested and in the command window I get nothing

I know the risks ( I think)
Hirs_E_Fruit said:
BTW you will get in a Bootloop if your dont know how to exit I would not root your phone!
Click to expand...
Click to collapse
Thanks so much for your concern, I know. But I love the phone but need to make it more Android (Google) friendly as it has Chinese firmware which keeps ending any relationship I have with google play services thus rendering the phone useless (almost)

You have been so helpful
rowihel2012 said:
1-shut down the phone
2-connect the usb cable with holding volume down .now you will be in bootloader
3-open cmd command in windows
4-type (fastboot flash recovery recovery.img (you must before rename the recovery file to recovery.img)
5-now after flashing the recovery .hold power+volume up to enter recovery
6-then install the root zip file
7-reboot the phone
Click to expand...
Click to collapse
I did all you suggested and I could not get it to I renamed the file and as you can see I did a command entry and can see my device which is in faboot and rescue mode (phone unlocked) then I type the command you suggested fastboot flash recovery recovery.img and I get this message
I just do not know what I am doing here

Have u unlocked the bootloader?
BTW my method i posted works if u do it right!

michaeldanielbourke said:
I did all you suggested and I could not get it to I renamed the file and as you can see I did a command entry and can see my device which is in faboot and rescue mode (phone unlocked) then I type the command you suggested fastboot flash recovery recovery.img and I get this message
I just do not know what I am doing here
Click to expand...
Click to collapse
The recovery img file link did you downloaded it?
You must download it and but the recovery.img file in fastboot folder
Then rename it to recovery.img.
And open cmd orders from fastboot folder .
Just type
fastboot flash recovery recovery.img

You must download the recovery file into the same folder that you ran your command and in your case "p8 max root". Make sure that the recovery filename is recovery.img instead of some other names.
Sent from my HUAWEI P8max using Tapatalk

Can I just say you have all been so helpful, l am a newb who got cocky and killed my beautiful phone. Now i just get the Huawei logo and no software

What recovery are you on right now? The stock one or twrp?
Sent from my HUAWEI P8max using Tapatalk

Stock
Leechoonhwee said:
What recovery are you on right now? The stock one or twrp?
Sent from my HUAWEI P8max using Tapatalk
Click to expand...
Click to collapse
Hello,
I have twice but now I am stuck on the Huawei logo and powered by Android screen. I can boot into Stock Bootload but no longer TWRP
even though I have reflashed recovery twice. Just chinese language and the EMUI screen with the three options

I think it's time to unroot and flash a new system and do it like i posted, then it will work!

michaeldanielbourke said:
Hello,
I have twice but now I am stuck on the Huawei logo and powered by Android screen. I can boot into Stock Bootload but no longer TWRP
even though I have reflashed recovery twice. Just chinese language and the EMUI screen with the three options
Click to expand...
Click to collapse
Did you reflash recovery2 also?

Unable to boot in to recovery mode!!!! Help!!!!!!!!!!!!!

I have an Honor 6 L02. After i used the honor 6 multitool to flash my CWM recovery back in to stock, i did not get the recovery screen when i pressed down the buttons, nor when i downloaded an app that would do that for me, also my OTA updates fails, i thought rooting was the problem so i unrooted, now Freedom stopped working so i cant use google play and youtube. PLEASE HELP!

also my phone was rooted so i unroot it

Please help

come on guys please

for the rooted phones you can try "Quick boot" from Google play store. It has option to "Boot into recovery"...
can you also try to send CWM again via Multitool and to see if you can get into CWM?

Bill Cui said:
I have an Honor 6 L02. After i used the honor 6 multitool to flash my CWM recovery back in to stock, i did not get the recovery screen when i pressed down the buttons, nor when i downloaded an app that would do that for me, also my OTA updates fails, i thought rooting was the problem so i unrooted, now Freedom stopped working so i cant use google play and youtube. PLEASE HELP!
Click to expand...
Click to collapse
Don't freak out. Stay calm...
Follow the steps:
Installing ADB / Fastboot and Necessary Drivers
Download 15 Seconds ADB and Fastboot Drivers. Visit the official XDA forum for download and installation instructions.
Install Fastboot drivers by downloading and installing Huawei HiSuite via this link.
Installing Custom Recovery
Ensure that you have successfully installed all necessary tools and drivers mentioned above.
Download the CWM recovery image according to your EMUI version. See this XDA Thread for download links.
Power off your device. While holding Volume Down button use a USB cable to attach your device to computer. Device will automatically boot to fastboot mode.
Open Command Prompt in the directory where you have extracted/downloaded the files by holding Shift and Right Mouse Button and finally click Open Command Prompt window here in the context menu.
Now execute the following command one at a time (replace recovery name with the one you downloaded);
Code:
fastboot flash recovery [I]recovery_name.img[/I]
fastboot reboot
Ta Da!!!

mfbcool said:
Don't freak out. Stay calm...
Follow the steps:
Installing ADB / Fastboot and Necessary Drivers
Download 15 Seconds ADB and Fastboot Drivers. Visit the official XDA forum for download and installation instructions.
Install Fastboot drivers by downloading and installing Huawei HiSuite via this link.
Installing Custom Recovery
Ensure that you have successfully installed all necessary tools and drivers mentioned above.
Download the CWM recovery image according to your EMUI version. See this XDA Thread for download links.
Power off your device. While holding Volume Down button use a USB cable to attach your device to computer. Device will automatically boot to fastboot mode.
Open Command Prompt in the directory where you have extracted/downloaded the files by holding Shift and Right Mouse Button and finally click Open Command Prompt window here in the context menu.
Now execute the following command one at a time (replace recovery name with the one you downloaded);
Code:
fastboot flash recovery [I]recovery_name.img[/I]
fastboot reboot
Ta Da!!!
Click to expand...
Click to collapse
Thank you, i did successfully flash the recovery, but i still cannot boot in to recovery mode, and now i cant turn my phone off because it will reboot by itself

Bill Cui said:
Thank you, i did successfully flash the recovery, but i still cannot boot in to recovery mode, and now i cant turn my phone off because it will reboot by itself
Click to expand...
Click to collapse
Does it reboot when you try to enter recovery or it restarts itself at boot process i.e honor boot animation shows up and then it restarts (bootloop).
I really don't know why you are still unable to boot to recovery. Were you able to boot to stock recovery before flashing custom? Also, is your bootloader unlocked?
Your best bet at this stage would be to flash stock recovery and then completely flash stock ROM. This would wipe your data but will resurrect your device from bootloop.
---------- Post added at 11:47 AM ---------- Previous post was at 11:42 AM ----------
You mentioned a warez app in your original post OP. Please note that any mentioning or discussion of such apps violates XDA's code of conduct and terms. Be careful in future

QMobile Noir E2 Root Method (No Bootloader Unlock Method Added)

Backstory:
I Bought this device from Pakistan for Rs15500 or 147 US Dollars. It was a relatively cheap and good device and like all QMobile Devices i thought it would have a counterpart in the Micromax Community like my old phone Qmobile Noir A10 and as it is known in India as Micromax A110.
Sadly i was mistaken. i scoured the net for any device resembling mine and none were found ... well none that had Android 7 or the same chip set.
SO Last Night i Sat Down and Worked and Somehow i was able to port a semi-working TWRP Recovery for This Device :fingers-crossed:
It Doesn't currently mount the Internal Storage... External SDCARD WORKS :good:
AND NOW THE GUIDE TO ROOT.
****************************************************************************************
Pre-Requisites.
Unlocked Bootloader
ADB ON PC
USB With OTG Support or USB AND OTG CABLE
PATIENCE
****************************************************************************************
To Unlock Bootloader.
WARNING UNLOCKING BOOTLOADER WILL WIPE DEVICE SO BACK IT UP
Go TO Developer Options
Scroll Down to OEM UNLOCKING and Check it
Connect phone to PC
Then Open CMD and TYPE
Code:
adb reboot bootloader
Wait til it boots into fastboot mode [ Black screen with tiny text at bottom]
Then Type
Code:
fastboot oem unlock
Press enter and Follow guide on Phone screen
After Completion of Unlocking type
fastboot reboot
Click to expand...
Click to collapse
Boot into Device and Set it up
Then Download Recovery.img from https://mega.nz/#!ewVSyI7B!xAvgnzYORGFCtXLyxerNt9hx8Awz-5hNO2vlz5uabfo
****************************************************************************************
FLASHING RECOVERY
Reboot back into bootloader and type
Code:
fastboot flash recovery **DRAG&DROP RECOVERY.IMG HERE**
Press enter
then type
Code:
fastboot reboot
****************************************************************************************
ROOTING
Go to http://www.supersu.com/download and Download the Latest zip file.
Place the zip file on a usb.
Connect Phone to PC
Type
Code:
adb reboot recovery
and Press Enter
Phone should boot into TWRP
Disconnect from PC
Connect USB-OTG To Phone.
go to Mount and click on Select Storage and Choose USB-OTG
now go to Install and Choose The SUPERSU Update zip file and flash it.
AND REBOOT.
****************************************************************************************
Phone will reboot and during mid boot it will reboot again .... that is totally normal.
and Now Your Device is ROOTED Congrats
****************************************************************************************
If any dev wants to fix the recovery he can do it but give credit where its due .
External SDCard Works and This Recovery might as well work with Panasonic Eluga A3 as they both are identical copies of each other ...
************************************************************************************************************
Rooting With Locked Bootloader.
Pre-Requisites :
1 ) Locked Bootloader
2 ) SP FlashTool --> Download HERE
3 ) TWRP From Above or HERE
4 ) Modified Scatter File from HERE
5 ) Magisk Zip file and Magisk Manager and Keep them in SDCARD OR USB with OTG
******************************************************************************************************************
Flashing Stuff Guide.
Turn off Your Device
Download and Extract the SP Tool to some directory
Download the TWRP and Scatter file and keep them in a folder together
Rename the twrp file to recovery.img
Open SP Flash tool and Load the scatter file.
Below That set the Download Mode to Download Only, Not Firmware upgrade or Format + Download.
Then press the Green Download Button.
OR SEE HERE
Connect the usb cable to your mobile phone and not to the pc
Press and Hold the vol up and vol Down buttons simultaneously and connect the usb cable to the PC.
The Flashtool should Detect your device and start flashing the recovery img.
After completion device should be powered off.
Press and hold the vol UP button while powering up the device to boot into twrp.
In Twrp go to install and change storage to sdcard and locate the magisk zip file and install it.
after installation reboot to system. and install the magisk manager app
Congrats You have successfully rooted your device with a locked bootloader.:laugh::laugh:
Now with magisk you can install Xposed and various other mods systemlessly.
Enjoy
*************************************************************************
For and further inquiries comment below.

Reserved
1) SDCard works fine with recovery
2) Found identical device . Panasonic Eluga A3
3) Will test Recovery of Eluga A3 soon :fingers-crossed:

i have done all the steps you mentioned ..but it stucks on applying update from sd card...
USB-OTG is not showing ...when i try to update through sd card ,,,IT says ""Installation aborted"

bluedrago said:
i have done all the steps you mentioned ..but it stucks on applying update from sd card...
USB-OTG is not showing ...when i try to update through sd card ,,,IT says ""Installation aborted"
Click to expand...
Click to collapse
The Stock System of Noir E2 is Encrypted ..... all nougat based systems are encrypted
You need to backup all data in internal storage to your pc and go to TWRP and Go to Wipe and CLICK ON FORMAT DATA BUTTON
that will remove encryption and allow you to flash zip files

Do you have any custom rom for qmobile e2 like Cm14 rom or miui rom or any other
Bro i want another rom which can be flashed into the qmobile e2.The stock firmware is not good and it lags.
Also i don't like its stock firmware user interface.
So is there any way to flash another rom in it.
I searched alot about it but can't find any rom which can be flashed into it
And u r last hope.
I hope u will have any solution.:good:
Reply must. I am waiting.

Aqdas Iftikhar said:
Bro i want another rom which can be flashed into the qmobile e2.The stock firmware is not good and it lags.
Also i don't like its stock firmware user interface.
So is there any way to flash another rom in it.
I searched alot about it but can't find any rom which can be flashed into it
And u r last hope.
I hope u will have any solution.:good:
Reply must. I am waiting.
Click to expand...
Click to collapse
All I can share with you is the stock rom of Panasonic Eluga A3. If you want that do reply

Yes I Want Bro. Also share the method to port/Flash it. And have u tested it.
andromodgod said:
All I can share with you is the stock rom of Panasonic Eluga A3. If you want that do reply
Click to expand...
Click to collapse
Also tell me if everything is working on Panasonic rom like fingerprint sensor and sdcard etc.
I have read the specs of Panasonic eluga a3 and gsmarena shows that there is no fingerprint sensor in Panasonic eluga a3. So plz tell me that everything is working correctly or there is some bugs.
And share me the method to port/flash that rom.
I will me thankful to you.

Aqdas Iftikhar said:
Also tell me if everything is working on Panasonic rom like fingerprint sensor and sdcard etc.
I have read the specs of Panasonic eluga a3 and gsmarena shows that there is no fingerprint sensor in Panasonic eluga a3. So plz tell me that everything is working correctly or there is some bugs.
And share me the method to port/flash that rom.
I will me thankful to you.
Click to expand...
Click to collapse
Everything works .... You will have to flash the OS via SP Flash tools so make backup of everything in your internal storage ... Also it comes with some preinstalled apps so you will have to delete those .... But over all it's a much more optimized system than the QMobile OS.
https://drive.google.com/uc?id=0B4KUp-X2vfc3aVpiQUdiQ293OGM&export=download
Download from above ... Flash using SP Flash tools and after setting phone up there will be a small update ... Install that and then flash twrp and install magisk and if you want install Xposed as well.
Enjoy.

I got an error in sp flash tool and also Non removable battery problem
andromodgod said:
Everything works .... You will have to flash the OS via SP Flash tools so make backup of everything in your internal storage ... Also it comes with some preinstalled apps so you will have to delete those .... But over all it's a much more optimized system than the QMobile OS.
https://drive.google.com/uc?id=0B4KUp-X2vfc3aVpiQUdiQ293OGM&export=download
Download from above ... Flash using SP Flash tools and after setting phone up there will be a small update ... Install that and then flash twrp and install magisk and if you want install Xposed as well.
Enjoy.
Click to expand...
Click to collapse
The error shown is given below:-
{Initializing scatter file failed. Please check the name of scatter file which you load is legal.}
Also it select only two files:-
1- logo
2- system
Plzz fix this problem and can u plz send me a video tutorial because my device has non removable battery and also not get detected in sp flash tool.
Thanks
---------- Post added at 03:05 PM ---------- Previous post was at 02:30 PM ----------
andromodgod said:
Everything works .... You will have to flash the OS via SP Flash tools so make backup of everything in your internal storage ... Also it comes with some preinstalled apps so you will have to delete those .... But over all it's a much more optimized system than the QMobile OS.
https://drive.google.com/uc?id=0B4KUp-X2vfc3aVpiQUdiQ293OGM&export=download
Download from above ... Flash using SP Flash tools and after setting phone up there will be a small update ... Install that and then flash twrp and install magisk and if you want install Xposed as well.
Enjoy.
Click to expand...
Click to collapse
i old version of sp flash tool the file opens with an error
i tried new version 5.1524.00 but in that version the file even doesnt loads.'
plzz help me i am tired of the bugs which r present in qmobile os.
I will be very very thankful to u.

Aqdas Iftikhar said:
The error shown is given below:-
{Initializing scatter file failed. Please check the name of scatter file which you load is legal.}
Also it select only two files:-
1- logo
2- system
Plzz fix this problem and can u plz send me a video tutorial because my device has non removable battery and also not get detected in sp flash tool.
Thanks
---------- Post added at 03:05 PM ---------- Previous post was at 02:30 PM ----------
i old version of sp flash tool the file opens with an error
i tried new version 5.1524.00 but in that version the file even doesnt loads.'
plzz help me i am tired of the bugs which r present in qmobile os.
I will be very very thankful to u.
Click to expand...
Click to collapse
Download Latest Version of SP Flash tool from http://spflashtool.com
Then extract the Downloaded OS into a separate folder on your desktop.
Then open SPFlash tools and Switch off your device ...
Load the scatter file on to SPFlash tolls that you extracted ... It will be in the OS folder with all the .img files.
Press the start button.
Then connect your device to the PC ... Remember device must be switched off properly.
Flashing should begin automatically.

Many Thanks bro I have flashed the ROM successfully
Thanks for ur help.
After alot of stuggle and with your help I have successfully flashed Panasonic rom.
U said that there will be an update but I checked and it says the software is latest and no upset available.
Why in my phone there is no update??.

Aqdas Iftikhar said:
Thanks for ur help.
After alot of stuggle and with your help I have successfully flashed Panasonic rom.
U said that there will be an update but I checked and it says the software is latest and no upset available.
Why in my phone there is no update??.
Click to expand...
Click to collapse
i forgot ... the link that i shared had the lastest update already .

I tried to root my device and in fast boot i encountered a problem
andromodgod said:
Backstory:
I Bought this device from Pakistan for Rs15500 or 147 US Dollars. It was a relatively cheap and good device and like all QMobile Devices i thought it would have a counterpart in the Micromax Community like my old phone Qmobile Noir A10 and as it is known in India as Micromax A110.
Sadly i was mistaken. i scoured the net for any device resembling mine and none were found ... well none that had Android 7 or the same chip set.
SO Last Night i Sat Down and Worked and Somehow i was able to port a semi-working TWRP Recovery for This Device :fingers-crossed:
It Doesn't currently mount the Internal Storage... External SDCARD WORKS :good:
AND NOW THE GUIDE TO ROOT.
****************************************************************************************
Pre-Requisites.
Unlocked Bootloader
ADB ON PC
USB With OTG Support or USB AND OTG CABLE
PATIENCE
****************************************************************************************
To Unlock Bootloader.
WARNING UNLOCKING BOOTLOADER WILL WIPE DEVICE SO BACK IT UP
Go TO Developer Options
Scroll Down to OEM UNLOCKING and Check it
Connect phone to PC
Then Open CMD and TYPE
Code:
adb reboot bootloader
Wait til it boots into fastboot mode [ Black screen with tiny text at bottom]
Then Type
Code:
fastboot oem unlock
Press enter and Follow guide on Phone screen
After Completion of Unlocking type
Boot into Device and Set it up
Then Download Recovery.img from https://mega.nz/#!KgMVgDwA!ImQoiSBUf9GitR5_K5Dxlzq01P0V4oqsZu5K2-RjZNQ
****************************************************************************************
FLASHING RECOVERY
Reboot back into bootloader and type
Code:
fastboot flash recovery **DRAG&DROP RECOVERY.IMG HERE**
Press enter
then type
Code:
fastboot reboot
****************************************************************************************
ROOTING
Go to http://www.supersu.com/download and Download the Latest zip file.
Place the zip file on a usb.
Connect Phone to PC
Type
Code:
adb reboot recovery
and Press Enter
Phone should boot into TWRP
Disconnect from PC
Connect USB-OTG To Phone.
go to Mount and click on Select Storage and Choose USB-OTG
now go to Install and Choose The SUPERSU Update zip file and flash it.
AND REBOOT.
****************************************************************************************
Phone will reboot and during mid boot it will reboot again .... that is totally normal.
and Now Your Device is ROOTED Congrats
****************************************************************************************
If any dev wants to fix the recovery he can do it but give credit where its due .
External SDCard Works and This Recovery might as well work with Panasonic Eluga A3 as they both are identical copies of each other ...
************************************************************************************************************
Rooting With Locked Bootloader.
Pre-Requisites :
1 ) Locked Bootloader
2 ) SP FlashTool --> Download HERE
3 ) TWRP From Above or HERE
4 ) Modified Scatter File from HERE
5 ) Magisk Zip file and Magisk Manager and Keep them in SDCARD OR USB with OTG
******************************************************************************************************************
Flashing Stuff Guide.
Turn off Your Device
Download and Extract the SP Tool to some directory
Download the TWRP and Scatter file and keep them in a folder together
Rename the twrp file to recovery.img
Open SP Flash tool and Load the scatter file.
Below That set the Download Mode to Download Only, Not Firmware upgrade or Format + Download.
Then press the Green Download Button.
OR SEE HERE
Connect the usb cable to your mobile phone and not to the pc
Press and Hold the vol up and vol Down buttons simultaneously and connect the usb cable to the PC.
The Flashtool should Detect your device and start flashing the recovery img.
After completion device should be powered off.
Press and hold the vol UP button while powering up the device to boot into twrp.
In Twrp go to install and change storage to sdcard and locate the magisk zip file and install it.
after installation reboot to system. and install the magisk manager app
Congrats You have successfully rooted your device with a locked bootloader.:laugh::laugh:
Now with magisk you can install Xposed and various other mods systemlessly.
Enjoy
*************************************************************************
For and further inquiries comment below.
Click to expand...
Click to collapse
Bro when i booted into fastboot after executing command to unlock bootloader in mobile it says to press volume up key and i pressed it again and again but no response but when i press volume down key it executes instantly and volume down key purpose is to not unlock bootloader.
plzz help me.
also in locked boot loader method sp flash tool says (enable dram failed) and thus i cannot flash recovery
.
plzzz help me out.
i have installed panasonic eluga a3 rom

Aqdas Iftikhar said:
Backstory:
I Bought this device from Pakistan for Rs15500 or 147 US Dollars. It was a relatively cheap and good device and like all QMobile Devices i thought it would have a counterpart in the Micromax Community like my old phone Qmobile Noir A10 and as it is known in India as Micromax A110.
Sadly i was mistaken. i scoured the net for any device resembling mine and none were found ... well none that had Android 7 or the same chip set.
SO Last Night i Sat Down and Worked and Somehow i was able to port a semi-working TWRP Recovery for This Device :fingers-crossed:
It Doesn't currently mount the Internal Storage... External SDCARD WORKS :good:
AND NOW THE GUIDE TO ROOT.
****************************************************************************************
Pre-Requisites.
Unlocked Bootloader
ADB ON PC
USB With OTG Support or USB AND OTG CABLE
PATIENCE
****************************************************************************************
To Unlock Bootloader.
WARNING UNLOCKING BOOTLOADER WILL WIPE DEVICE SO BACK IT UP
Go TO Developer Options
Scroll Down to OEM UNLOCKING and Check it
Connect phone to PC
Then Open CMD and TYPE
Wait til it boots into fastboot mode [ Black screen with tiny text at bottom]
Then Type
Press enter and Follow guide on Phone screen
After Completion of Unlocking type
Boot into Device and Set it up
Then Download Recovery.img from https://mega.nz/#!KgMVgDwA!ImQoiSBUf9GitR5_K5Dxlzq01P0V4oqsZu5K2-RjZNQ
****************************************************************************************
FLASHING RECOVERY
Reboot back into bootloader and type
Press enter
then type
****************************************************************************************
ROOTING
Go to http://www.supersu.com/download and Download the Latest zip file.
Place the zip file on a usb.
Connect Phone to PC
Type
Bro when i booted into fastboot after executing command to unlock bootloader in mobile it says to press volume up key and i pressed it again and again but no response but when i press volume down key it executes instantly and volume down key purpose is to not unlock bootloader.
plzz help me.
also in locked boot loader method sp flash tool says (enable dram failed) and thus i cannot flash recovery
.
plzzz help me out.
i have installed panasonic eluga a3 rom
Click to expand...
Click to collapse
After pressing volume up.key few times ... Press the home button . Phone thinks that vol up is home button ... Dunno why that is though ??

andromodgod said:
After pressing volume up.key few times ... Press the home button . Phone thinks that vol up is home button ... Dunno why that is though
Click to expand...
Click to collapse
bro i have unlocked bootloader succesfully.
but when i give command to flash recovery the adb show tranfering and then ok.
but after reboot when i give command to reboot to recovery it boots into panasonic stock recovery.
plzz help me.
and also tell me why sp flash tool is giving me (failed to enable dram error) and give solution.
i hope u will have solution of these matter.
Many Thanks.:fingers-crossed::good:

Aqdas Iftikhar said:
bro i have unlocked bootloader succesfully.
but when i give command to flash recovery the adb show tranfering and then ok.
but after reboot when i give command to reboot to recovery it boots into panasonic stock recovery.
plzz help me.
and also tell me why sp flash tool is giving me (failed to enable dram error) and give solution.
i hope u will have solution of these matter.
Many Thanks.:fingers-crossed::good:
Click to expand...
Click to collapse
After flashing recovery in fastboot . Use this command WHILE HOLDING VOL UP BUTTON
Fastboot reboot
Then phone will reboot into twrp recovery .
I'll need to research on the other one.

I have rooted my device but cannot boot into system twrp opens again and again.
andromodgod said:
After flashing recovery in fastboot . Use this command WHILE HOLDING VOL UP BUTTON
Fastboot reboot
Then phone will reboot into twrp recovery .
I'll need to research on the other one.
Click to expand...
Click to collapse
Bro after rooting my device i restarted my device but twrp recovery boots again and again and not boot the system.
in twrp i selected to reboot to system but it open twrp recovery again.
i wipe the data and cache but still twrp is openeing.
plzz help me i even cannot acces my device in this situation.
Reply fast.
---------- Post added at 05:46 AM ---------- Previous post was at 05:29 AM ----------
andromodgod said:
After flashing recovery in fastboot . Use this command WHILE HOLDING VOL UP BUTTON
Fastboot reboot
Then phone will reboot into twrp recovery .
I'll need to research on the other one.
Click to expand...
Click to collapse
Bro tell me can i relock bootloader and remove or unflash twrp recovery after gaining root access.
if yes tell me how i can remove twrp recovery becasue it is irritating.
Plzz help me out.

When I click Mount/System it returns back to first option (Reboot) with a blink.
I am following first method.
Please help me.
PLzzzzzzzzzzzzzzz

PLz update the link of magisk zip file
The current link is not working. So plz update the link of magisk zip file.

FIXED: Mount Internal Storage in TWRP (Q Mobile Noir E2)
To mount internal storage in TWRP Recovery, Click on Wipe > Format Data > Type "yes" and Click on Ok. Then Reboot into Recovery. Now your Internal Storage is Mounted in TWRP. But it will format whole internal storage and factory reset rom so make a backup before doing this.