Hello,
I'm not sure this is the right section to ask for help about my problem, so please excuse me if its against the rules.
The problem is that voice messages in viber do not work over mobile data. When wi-fi is on, everything works fine, but on mobile data alone im getting constant errors when recieving or sending voice messages.
This is the error I get when recieveing a voice message:
Oops...
An error has occured while downloading the voice message. Please try again.
Click to expand...
Click to collapse
And this is when I try to send a voice message:
No Connectivity
An internet connection is required to complete this action. Please check your connection and try again.
Click to expand...
Click to collapse
As I said above - all works fine when I use Wi-Fi, so at first I tought its because of the mobile network. Checked my speeds and everything is normal for 3G connection. Tried to manualy change from Auto to 3G and then to 2G (4G is not supported here in Bulgaria), but it didn't help. I also tried to clear cache and delete data for Viber, still not working. Even after factory reset of my phone it still not working.
The phone is a Sony Xperia M2 updated with its original 4.4.2 software (its not rooted!) and viber is updated to the last version as well. Mobile provider is Mobiltel (Mtel) Bulgaria.
Any ideas how to fix are appriciated! Thank you!
Related
I just flashed up the new Energy ROM. I keep getting a pop up that says "Device in registering on a voice service only network. Data services are currently unavailable." The internet seems to be working fine. I know i am in a 1X only service area but everything was fine on the stock ROM. Why am i getting this pop up and how can i fix it?
Anyone help with a solution for the "voice service only" popup ???
I am getting the same pop up on the mighty rom and i am also in the 1x area. Data is working fine also but this error is annoying.
Device is registering on a voice only network error message
Device is registering on a voice only network. This is extremely annoying. This error message will pop up in no more than 5 seconds after you click OK. This happens on flashed roms of the Touch Pro 2. I am on Verizon.
rayearth05 said:
Device is registering on a voice only network. This is extremely annoying. This error message will pop up in no more than 5 seconds after you click OK. This happens on flashed roms of the Touch Pro 2. I am on Verizon.
Click to expand...
Click to collapse
I've been looking for a possible fix to this issue as well and can't find anything. I also contacted htc support hoping there might be a way to disable the message alert but they say it's verizon's network that sends out the message? I guess this makes sense considering it doesn't happen with the Verizon stock ROM! I was hoping a registry hack might do the trick, but if it's a message from the network then there's not much you can do to stop it unless verizon was to issue a specific carrier cab to address it. . .
did you program your phone with *228 after your last flash??
Check this out:
http://forum.ppcgeeks.com/showthread.php?t=98401&highlight=modified+prl&page=9
More specifically:
http://forum.ppcgeeks.com/showpost.php?p=1465879&postcount=85
Hi,
I am facing strange problem. when i use voip using wifi everything is fine but when i use the mobile network. call connects but goes blank after 4-5 seconds. does anyone know what can be issue.
i am currently on ICS 4.03 version with 11.69.3504.00U_11.22.3504.07_M radio.
any help or suggestion will be helpful as i tried to contact the voip company and they say it should work as they have tested on several android phones and not heard of such issue.
regards
dhruv
Any help still awaiting some help.
voip over 3g is working fine for me too
try clearing the data of the voip app ..then uninstall it and reinstall it again and see
Hi
Im having a strange issue that i only just noticed and was wondering if others are having the same problem.
It seems when i am connected to either 5ghz wifi AC or Wifi 2.5gz N,
My phone refuses to accept incoming calls, will call out just fine but will not let me receive.
when I turn wifi off calls come through OK, Just wondering if there is someone who can help.
Update - I have re-flashed both kernel to stock - same wifi being on blocks incoming calls.
I have re-flashed the ROM - again, same issue Wifi seems to interfere with incoming calls and sms. -- Will not receive anything until I disable wifi??
I have also just booted into Safe Mode and the same problem still exists - Wifi is blocking incoming calls, but i can send sms and calls while being on wifi.
Is this a Bug!!! should I report this to CM - could some one else please try this process.
I have also checked and double checked my APN settings and they are correct.
Will do a complete factory reset and see if problem still exists.
UPDATE 2
This has to be a bug I have factory fastboot.zip'd back to XNPH22R
and the wifi bug is still there!
Thankyou in advance
I have the same problem, for which not received a call on the job.
How to solve it? help
I realised my APN settings it was also using 4g but my provider doesn't do 4g when set to 3g only my problems went away.
What Rom are you using? That would help.
Stay to the latest version of the rom
Sent from my One A0001 using Tapatalk
I changed the sim card and the network, the problem is solved.
Dealing with this issue on my AT&T LG G8 on T mobile.
Hi all,
I wanted to create a dedicated thread to what have been scatteredly reported by other users in various generic threads when unlocking the Kyocera Brigadier. Mine is rooted (4.4.2, software version 1.102VZ, Kernel 3.4.0-g42c25d8, Build #KOTH49H) with a T-Mobile plan. The original carrier for the device was Verizon. I applied that trick to unlock APN settings. It worked pretty well (I've used kingroot instead of debloater). The Data (4G LTE) is now blazing fast and I can receive call and text messages. However, I can't make outgoing call/text. Below are some details:
Outgoing call: The phone application continuously indicates "CALLING..." but it is stuck there. If this is the first call after a reboot I also have the message "Error while searching for network". Then, I try to tap the "End Call" button but that do not close the phone app. The only way to unfreeze the app is to wait for an incoming call. About 1 restart out of 10 gives the error message "Unfortunately the process com.android.phone has stopped".
Outgoing text message: I systematically get the Error "Cause Code 0"
A factory reset do not solve the issue.
I would be very gratefull if a pro could help.
Not getting a lot of help on this, eh? I have the same problem with mine, I wish I had done more research before I bought the phone. I guess all I can do now is put the paperweight back in the box until either someone makes a rom for it or i figure out how to do it.
is your 4g lte is t-mobile's or else? what band is t-mobile's 4g?
did you try 3g or global and tested call/sms?
im outside usa my local sim is working on 3g out/coming calls and sms are fine but no 4g yet....
i hope someone will help you
I am on the Rogers network in Ontario, Canada. Wireless internet works perfectly, I get 4g, and can receive calls and texts, but I am unable to send either. Rogers was no help, they said it was a software issue. Downloading different phone and texting apps did nothing. The bloody wireless companies locking phones down is a complete pain in the ass.
grimy55 said:
Hi all,
I wanted to create a dedicated thread to what have been scatteredly reported by other users in various generic threads when unlocking the Kyocera Brigadier. Mine is rooted (4.4.2, software version 1.102VZ, Kernel 3.4.0-g42c25d8, Build #KOTH49H) with a T-Mobile plan. The original carrier for the device was Verizon. I applied that trick to unlock APN settings. It worked pretty well (I've used kingroot instead of debloater). The Data (4G LTE) is now blazing fast and I can receive call and text messages. However, I can't make outgoing call/text. Below are some details:
Outgoing call: The phone application continuously indicates "CALLING..." but it is stuck there. If this is the first call after a reboot I also have the message "Error while searching for network". Then, I try to tap the "End Call" button but that do not close the phone app. The only way to unfreeze the app is to wait for an incoming call. About 1 restart out of 10 gives the error message "Unfortunately the process com.android.phone has stopped".
Outgoing text message: I systematically get the Error "Cause Code 0"
A factory reset do not solve the issue.
I would be very gratefull if a pro could help.
Click to expand...
Click to collapse
mine only got 3g from celcom malaysia prepaid,but can use all that feature,only need to unlock that 4g,tried many method but still cant do 4g
I'm getting really bad signal in my house and I'm not able to receive any phone calls and messages because of it and I tried to use wifi calling but there is no such option for vivo next, is there anyway I can get wifi calling from any apps or settings? Thank you for helping.
Kitty King Kit said:
I'm getting really bad signal in my house and I'm not able to receive any phone calls and messages because of it and I tried to use wifi calling but there is no such option for vivo next, is there anyway I can get wifi calling from any apps or settings? Thank you for helping.
Click to expand...
Click to collapse
Try vivo support in facebook messenger... They reply almost instantly. Maybe they will help.
is it location issue or phone issue? other phones have the same issue?