I just flashed up the new Energy ROM. I keep getting a pop up that says "Device in registering on a voice service only network. Data services are currently unavailable." The internet seems to be working fine. I know i am in a 1X only service area but everything was fine on the stock ROM. Why am i getting this pop up and how can i fix it?
Anyone help with a solution for the "voice service only" popup ???
I am getting the same pop up on the mighty rom and i am also in the 1x area. Data is working fine also but this error is annoying.
Device is registering on a voice only network error message
Device is registering on a voice only network. This is extremely annoying. This error message will pop up in no more than 5 seconds after you click OK. This happens on flashed roms of the Touch Pro 2. I am on Verizon.
rayearth05 said:
Device is registering on a voice only network. This is extremely annoying. This error message will pop up in no more than 5 seconds after you click OK. This happens on flashed roms of the Touch Pro 2. I am on Verizon.
Click to expand...
Click to collapse
I've been looking for a possible fix to this issue as well and can't find anything. I also contacted htc support hoping there might be a way to disable the message alert but they say it's verizon's network that sends out the message? I guess this makes sense considering it doesn't happen with the Verizon stock ROM! I was hoping a registry hack might do the trick, but if it's a message from the network then there's not much you can do to stop it unless verizon was to issue a specific carrier cab to address it. . .
did you program your phone with *228 after your last flash??
Check this out:
http://forum.ppcgeeks.com/showthread.php?t=98401&highlight=modified+prl&page=9
More specifically:
http://forum.ppcgeeks.com/showpost.php?p=1465879&postcount=85
Related
I'm having issues with my Touch Pro on a T-Mobile US account. It fails to send texts alot, and I get that "Message was not sent. Try again?" prompt.
Does anyone know why this is happening, or a possible solution?
mentis said:
I'm having issues with my Touch Pro on a T-Mobile US account. It fails to send texts alot, and I get that "Message was not sent. Try again?" prompt.
Does anyone know why this is happening, or a possible solution?
Click to expand...
Click to collapse
Knock on wood I have not had the issue with T-Mobile USA so far. Try a soft reset?
I've tried a soft-reset. This problem seems intermitent and I can't seem to sort it out. It was like this out of the box but then seemed to start working so I disregarded it but now it's doing it again.
i dont have the touch pro (yet) but i have the same problem with my touch cruise. It is most likely since we are only on Edge which doesnt have enough bandwidth for SMS, data, and phone. So when data is connected i have times when this problem occurs. I did find a work around though that is easier than soft resetting.
Send the SMS, if you dont get the alert message saying its been sent within like 5~10 secs I will use the phone to call someone (i call my voicemail).
After about 10~30 seconds i get the alert telling me my message was sent.
Annoying yes but better than a soft reset each time
i just got my touch pro and also use t mobile in san francisco. so far no problems with txt or voice calls.
mentis said:
I'm having issues with my Touch Pro on a T-Mobile US account. It fails to send texts alot, and I get that "Message was not sent. Try again?" prompt.
Does anyone know why this is happening, or a possible solution?
Click to expand...
Click to collapse
Same problem here but in the Netherlands using T-Mobile. After this problem occurred I tried searching the internet but didn't found a solution. After about 30 minutes I tried it again and it worked
It could be having some sort of connection issues, might try having T-Mo verify the internal settings that its using to send the information. It almost might be your signal changing from H to G to E or something that is kicking out the SMS? Not sure but might be something worth looking into
I haven't been having any issues with my Touch Pro on the US network. However, when I bought my wife her LG Secret, we had the exact same issue. Easy resolution...call customer service. They have a department that specializes in phones not sold for the T-Mobile network. The department pushed two .exe files to my wife's phone, and got both SMS and MMS issues resolved.
The good news is we aren't the only ones buying outside of what T-Mo offers. So many people do that they have their own department to support us with no issues. They were a great resolution to our frustrations.
Good luck.
10332007 said:
It could be having some sort of connection issues, might try having T-Mo verify the internal settings that its using to send the information. It almost might be your signal changing from H to G to E or something that is kicking out the SMS? Not sure but might be something worth looking into
Click to expand...
Click to collapse
I think you are right. During browsing I noticed the same problems, my network changes from H to G and back. For a small period the connection will be lost, maybe that was the moment I wanted to send my SMS.
Is it possible to assign H for my preferred data connection?
Hello,
I am running cyanogenMod-HellFirePhoenix_V2.1 and it's pretty good but i am having a problem with call waiting. I specifically checked my T-Mobile plan and it says that I have call waiting feature, but when i go to call settings on my phone and try to enable it, it says "SimCard error, your network provider does not support this feature." I remember when i had stock OS a while ago call waiting used to work. Now i tested it and it just sends people straight to voice mail while the phone is busy. Can anyone offer any help with this?
Thanks,
Eagl3007 said:
Hello,
I am running cyanogenMod-HellFirePhoenix_V2.1 and it's pretty good but i am having a problem with call waiting. I specifically checked my T-Mobile plan and it says that I have call waiting feature, but when i go to call settings on my phone and try to enable it, it says "SimCard error, your network provider does not support this feature." I remember when i had stock OS a while ago call waiting used to work. Now i tested it and it just sends people straight to voice mail while the phone is busy. Can anyone offer any help with this?
Thanks,
Click to expand...
Click to collapse
You have to check the box before the message pops up. As far as the SIM error goes that's a known issue and hasn't been fixed AFAIK
Sent from my Porn Infested G2x using Tapatalk 2
It wont let me check the box. its grayed out.
Eagl3007 said:
It wont let me check the box. its grayed out.
Click to expand...
Click to collapse
Wondering if this is the same issue with my phone. I have the HELLFIRE Sandwich ROM loaded and I hear no notification of a second incoming calls either.
Theres a good chance that this feature was never used by the Dev and so was removed. I know I dont use it. If your not important enough for me to pick it up, you can go to voicemail where I wont call you back. If its someone important, then pick up the phone. I'm running Genesis and I get the ring while im on the phone.
Hi all,
I wanted to create a dedicated thread to what have been scatteredly reported by other users in various generic threads when unlocking the Kyocera Brigadier. Mine is rooted (4.4.2, software version 1.102VZ, Kernel 3.4.0-g42c25d8, Build #KOTH49H) with a T-Mobile plan. The original carrier for the device was Verizon. I applied that trick to unlock APN settings. It worked pretty well (I've used kingroot instead of debloater). The Data (4G LTE) is now blazing fast and I can receive call and text messages. However, I can't make outgoing call/text. Below are some details:
Outgoing call: The phone application continuously indicates "CALLING..." but it is stuck there. If this is the first call after a reboot I also have the message "Error while searching for network". Then, I try to tap the "End Call" button but that do not close the phone app. The only way to unfreeze the app is to wait for an incoming call. About 1 restart out of 10 gives the error message "Unfortunately the process com.android.phone has stopped".
Outgoing text message: I systematically get the Error "Cause Code 0"
A factory reset do not solve the issue.
I would be very gratefull if a pro could help.
Not getting a lot of help on this, eh? I have the same problem with mine, I wish I had done more research before I bought the phone. I guess all I can do now is put the paperweight back in the box until either someone makes a rom for it or i figure out how to do it.
is your 4g lte is t-mobile's or else? what band is t-mobile's 4g?
did you try 3g or global and tested call/sms?
im outside usa my local sim is working on 3g out/coming calls and sms are fine but no 4g yet....
i hope someone will help you
I am on the Rogers network in Ontario, Canada. Wireless internet works perfectly, I get 4g, and can receive calls and texts, but I am unable to send either. Rogers was no help, they said it was a software issue. Downloading different phone and texting apps did nothing. The bloody wireless companies locking phones down is a complete pain in the ass.
grimy55 said:
Hi all,
I wanted to create a dedicated thread to what have been scatteredly reported by other users in various generic threads when unlocking the Kyocera Brigadier. Mine is rooted (4.4.2, software version 1.102VZ, Kernel 3.4.0-g42c25d8, Build #KOTH49H) with a T-Mobile plan. The original carrier for the device was Verizon. I applied that trick to unlock APN settings. It worked pretty well (I've used kingroot instead of debloater). The Data (4G LTE) is now blazing fast and I can receive call and text messages. However, I can't make outgoing call/text. Below are some details:
Outgoing call: The phone application continuously indicates "CALLING..." but it is stuck there. If this is the first call after a reboot I also have the message "Error while searching for network". Then, I try to tap the "End Call" button but that do not close the phone app. The only way to unfreeze the app is to wait for an incoming call. About 1 restart out of 10 gives the error message "Unfortunately the process com.android.phone has stopped".
Outgoing text message: I systematically get the Error "Cause Code 0"
A factory reset do not solve the issue.
I would be very gratefull if a pro could help.
Click to expand...
Click to collapse
mine only got 3g from celcom malaysia prepaid,but can use all that feature,only need to unlock that 4g,tried many method but still cant do 4g
After rooting S7 I can't send text messages and my phone says "Searching For Service"
Alright so I really need some help. I rooted the Verizon S7 Edge SM-G935V successfully, but I can't send text messages. It says it isn't connected to the network when I try to send a text message. On my lock screen it shows that it is searching for service, but I have 4g LTE. I can make calls and surf the internet, but I can't send texts. When I go to settings/mobile networks I don't have as many options as I had before e.g. to choose what networks I want to use such as LGE/GSM/CDMA. What's going on here? I rerooted the phone and I still have the same issue. My lock screen will show "Searching for Service" in the top left corner.
If I make a phone call I have no problem sending text messages after the call ends.... until I restart the phone again. Then texting no longer works and I have to make another phone call to be able to send text messages. I have tried both Messenger+ and Samsung Messenger.
So I flashed back to the stock firmware and I immediately am connected to the network when the phone is restarting. So there was definitely an issue of some sort with the root. The root also caused my "Network Mode" option that was in "Mobile Networks" to disappear. I would really like to root again, but I can't do it with those issues. If anyone has any ideas I'm open to them.
Try making a phone call, it might trip it into working
jkohl0805 said:
Try making a phone call, it might trip it into working
Click to expand...
Click to collapse
It does work if I make a phone call, but once the phone is restarted it no longer works and I have to make a phone call again. I have no idea why it needs to be "jump started" like this.
Did anyone ever find a solution to this? Mine won't even text after I call.
Soonersiren said:
Did anyone ever find a solution to this? Mine won't even text after I call.
Click to expand...
Click to collapse
Same, on AT&T - APK1 Rooted.
Soonersiren said:
Did anyone ever find a solution to this? Mine won't even text after I call.
Click to expand...
Click to collapse
svfusion said:
Same, on AT&T - APK1 Rooted.
Click to expand...
Click to collapse
Hi
You may have better luck asking in the right forum
http://forum.xda-developers.com/att-galaxy-s7
http://forum.xda-developers.com/verizon-galaxy-s7
I'm on AT&T, as well.
Any solutions or work arounds?
Soonersiren said:
Did anyone ever find a solution to this? Mine won't even text after I call.
Click to expand...
Click to collapse
Fixed using this,
http://forum.xda-developers.com/showthread.php?t=1506812
Also, I just installed GOSMS and it works..
Hi I'm having no luck dealing with net 10, and I'm hoping I can get some assistance from you fellas here at xda . About a week ago my phone stopped making calls, when I try to dial out it says server unavailable. I can make texts when I send them it says sending forever but the text still goes through. I can receive texts , cannot receive calls and my internet works perfect. Net 10 is thoroughly convinced that I have a defective phone and after they have provisioned it 10 times nothing has changed . They had me factory reet, then after that failed has informed me I have a faulty device. So I bought another one and what do you know see problem .
Besides the fact that these people I don't think know anything about what they are talking about I am going nuts.
Here's what I have tried and some info I think may help
I have turned off volte and enhanced calling . Nothing happens .
My phone is the tcl lx
Net 10 Verizon sim
In phone info everything is right but voice network type says unknown
I have never seen this before but in shortcut maker I had 6 separate operator plugins activities. After whiping phone 2 remain the first just crashed second pops up a box saying switching to lte for better voice quility
Thanks I can provide any info if it will help