HELP PLEASE,
sir I m owning a micromax canvas 2 a110 .
recently I rooted my phone ics and flashed CYNUS T2 Rom on my canvas 2 .
when I try to root this rom, nothing happening to me .
tried flash tools as well it just srtuck at 0% no green ring to show progress.
when I choose recovery from path and press f9 to download
I always get an error not all the images are loaded properly you still want to continue I pressed yes nothing happens.
tried cmd as well to flash all commands worked except flashing recovery c:\recovery.img
it shows waiting for device as my device is attached 0123456789abcde
My drivers of mobistel is installed and adb working fine as it can be traced in device manager.
help me to root my jb cynus t2 rom so I can install pre rooted roms thanx....
tanmay5 said:
HELP PLEASE,
sir I m owning a micromax canvas 2 a110 .
recently I rooted my phone ics and flashed CYNUS T2 Rom on my canvas 2 .
when I try to root this rom, nothing happening to me .
tried flash tools as well it just srtuck at 0% no green ring to show progress.
when I choose recovery from path and press f9 to download
I always get an error not all the images are loaded properly you still want to continue I pressed yes nothing happens.
tried cmd as well to flash all commands worked except flashing recovery c:\recovery.img
it shows waiting for device as my device is attached 0123456789abcde
My drivers of mobistel is installed and adb working fine as it can be traced in device manager.
help me to root my jb cynus t2 rom so I can install pre rooted roms thanx....
Click to expand...
Click to collapse
Flash the Stock V2 via the SP Tool.
http://forum.xda-developers.com/show....php?t=1982587 [TUT]MTK Android (Sp flash tool ) tutorial
http://forum.xda-developers.com/show....php?t=1960080 check the first post for the Stock V2 ROM
Even iam facing the same issue sp flash tools cant detect my phone after cynus jb update
mayur.3.92 said:
Even iam facing the same issue sp flash tools cant detect my phone after cynus jb update
Click to expand...
Click to collapse
i think you need the cynus t2 driver..
0. Uninstall the micromax canvas 2 drivers.
1. Install mobistel cynus t2 rom using stock recovery.
2. Connect phone to pc, install mobistel drivers.
3. Remove phone from pc and turn it off. Open device manager in computer. Connect switched off phone to pc. You'll see a device in the COM ports section. Quickly right click it as it vanishes after a few seconds. Right click it and select update device driver.
4. Select the folder in which the cynus t2 drivers are installed. Now the drivers will be installed.
5. Replace the recovery.img with cwm recovery in stock v2 folder.
6. Remove your phone now and let it remain switched off. Open sp flash tool in administrator mode(just in case).
7. Load the scatter loading file and click download button.
8. Connect the phone now. And now everything should go fine.
yeah my mt65xx drivers was not installed after installing i used sp flash tools selected scatter file n recovery pressed download
red bar completes and showing enter usb in 15 sec after that i get an error helpp.............
error 8100 cant find usb port
what should i do know
sir when i use sp flash tool to root jb cynus t2 rom, i selected download when i connected my device it shows 100% with red bar and shows enter usb in 15 sec and after that shows an error 8100 usb port cant be located .
help as com ports are installed for MT65xx and is working properly and named is preloade usb vcom(android) Com 4.
yeah my mt65xx drivers was not installed after installing/updating from drive i selected mobile cynus t2 under program files and said encounted a problem and cant update drivers so i downloaded MT65xx drivers from xda site and browsed and drivers got installed named is preloade usb vcom(android) Com 4. i used sp flash tools selected scatter file n recovery pressed download
red bar completes 100% and showing enter usb in 15 sec after that i get an error helpp.............
error 8100 cant find usb port
what should i do know
this is the error i m getting
tanmay5 said:
this is the error i m getting
Click to expand...
Click to collapse
still no luck ?.
did you try drivers from pdanet?..
did u use "run as admininstrator" for running flashtool... then try without that. because for me, bin4ry rooting donot wrk if i use run as admin option!..
in one tutorial i found
"Please note that, even though it isn't mandatory to select it on the list of images to flash,
preloader file must be present in the same folder as the other partition(s) that you want to flash, or else phone will not be able to enter into download mode."
http://forum.xda-developers.com/showthread.php?t=1982587
so try keeping the cwm recovery.img in the same place as stock recovery was .. ( this is a wild wild gues) ..
Year I m tried a lot of trying I though buying an android will b a good move
But I think I ll stick to windows.
Thanx a lot bro for ur help n effort keep ur work up
I m going 2 sell canvas 2 I thought dev on xda will help me but no one is boughther about jb root
If any news about its root plz tel me
hey , dont loose hope yet bro..i know u hav done all steps correctly. but in my opinion, u need to have more patience ,,..you havent tried all your options yet....
other options are to run spflashtools in a different windows version...may b ur neighbours PC... with drivers freshly installed..
or wait for some jb root tools to come up
mmxa110user said:
hey , dont loose hope yet bro..i know u hav done all steps correctly. but in my opinion, u need to have more patience ,,..you havent tried all your options yet....
other options are to run spflashtools in a different windows version...may b ur neighbours PC... with drivers freshly installed..
or wait for some jb root tools to come up
Click to expand...
Click to collapse
I'll surely wait
thanx dude
if something new comes up please notify me
tk care
Flash tool @ 0%
I tried all possible methods for rooting for months and still the progress bar is @ 0%.... can anyone help me???
you will be given reward in cash.....
pleaseeeeeee.....
Josephxxx said:
I tried all possible methods for rooting for months and still the progress bar is @ 0%.... can anyone help me???
you will be given reward in cash.....
pleaseeeeeee.....
Click to expand...
Click to collapse
Humm it seems all are having similar problem ....
the best solution will be is to proceed freshly i.e format your windows and start again
remember install drivers properly and then use flash tool
see the results n keep posting .....
tanmay5 said:
Humm it seems all are having similar problem ....
the best solution will be is to proceed freshly i.e format your windows and start again
remember install drivers properly and then use flash tool
see the results n keep posting .....
Click to expand...
Click to collapse
If u have CWM or twrp Recovery...just download su update from here - http://download.chainfire.eu/382/SuperSU/UPDATE-SuperSU-v1.93.zip copy it to sd card & flash it via CWM or TWRP. maybe it will help u.
I rooted my galaxy grand win.. and installed transwin rom. But when I try to connect my phone to pc it's only charging and not able to transfer any data.. and it's not connecting to odin also.. when tried to flash another rom I got stuck in cwm recovery mode for almost 5 days..I searched on Google I found that using stock flash file I can come out of cwm.. so I booted into stock mode using "stock flash zip file" via install zip .. . Now I m not able to boot into cwm recovery mode.. please Help me to connect my phone to pc. And to boot into cwm recovery. Thanks in advance.. rom manager also not helping..now I installed stock rom which I have backed up before.. but still not able to connect with my pc...
Please Help me to boot in cwm recovery and to connect with odin.. ..
Sagar Kininge said:
I rooted my galaxy grand win.. and installed transwin rom. But when I try to connect my phone to pc it's only charging and not able to transfer any data.. and it's not connecting to odin also.. when tried to flash another rom I got stuck in cwm recovery mode for almost 5 days..I searched on Google I found that using stock flash file I can come out of cwm.. so I booted into stock mode using "stock flash zip file" via install zip .. . Now I m not able to boot into cwm recovery mode.. please Help me to connect my phone to pc. And to boot into cwm recovery. Thanks in advance.. rom manager also not helping..now I installed stock rom which I have backed up before.. but still not able to connect with my pc...
Please Help me to boot in cwm recovery and to connect with odin.. ..
Click to expand...
Click to collapse
Turn off your phone and then boot to Download Mode (to do that, press Power, Volume Down and Home button at the same time). If you have your phone's drivers installed on your PC then Odin should recognize your phone. Now go to samsung-updates.com and download your phone's firmware. The link I gave is for GT-I8552 - which I'm assuming is your phone's model number. Once it downloads, flash it using Odin.
Looks like MtpApplication.apk is missing on your phone. That's why you probably can't transfer any files. Either this or something might be wrong with your phone's micro USB port or your USB cable.
You can watch some tutorial videos on YouTube for more info. Good luck!
thanks for reply..
thank u very much for reply...
i solved that problem but now m facing one more problem, on my galaxy grand win 8552 i reinstalled TWRP and after reboot my phone not starting only.. totally dead.. no vibration,no light on pressing of any key.. only when i connect it to my laptop it says unkwn device(beeps like something is connected to pc) even phone is in dead condition.... actually i was running on cwm after directly i installed twrp and after finishing i selected reboot and after that nothing happened and phone not starting only.. no charging logo also.. today i just downloaded stock rom.. nw plzz tell me how to install stock rom..is there any way to flash stock rom?????? i cant enter into cwm ..
plz hel...
thanks for reply..
thank u very much for reply...
i solved that problem but now m facing one more problem, on my galaxy grand win 8552 i reinstalled TWRP and after reboot my phone not starting only.. totally dead.. no vibration,no light on pressing of any key.. only when i connect it to my laptop it says unkwn device(beeps like something is connected to pc) even phone is in dead condition.... actually i was running on cwm after directly i installed twrp and after finishing i selected reboot and after that nothing happened and phone not starting only.. no charging logo also.. today i just downloaded stock rom.. nw plzz tell me how to install stock rom..is there any way to flash stock rom?????? i cant enter into cwm ..
plz help...
Sagar Kininge said:
thank u very much for reply...
i solved that problem but now m facing one more problem, on my galaxy grand win 8552 i reinstalled TWRP and after reboot my phone not starting only.. totally dead.. no vibration,no light on pressing of any key.. only when i connect it to my laptop it says unkwn device(beeps like something is connected to pc) even phone is in dead condition.... actually i was running on cwm after directly i installed twrp and after finishing i selected reboot and after that nothing happened and phone not starting only.. no charging logo also.. today i just downloaded stock rom.. nw plzz tell me how to install stock rom..is there any way to flash stock rom?????? i cant enter into cwm ..
plz help...
Click to expand...
Click to collapse
Looks like you bricked your phone. Are you sure that the TWRP you installed is for your phone? Because this usually happens when you install something that was not made for your phone.
Try to do what I said earlier. Boot to Download Mode. And using Odin flash your phone's firmware. If the damage is not severe then by doing this it should fix your phone. If the damage is severe then perhaps your phone is permanently bricked.
can i install rom through sp tool.. i tried it also but it asking scatter file.. i dont have scatter file of galaxy grand win 8552.. if u have then plz give me its link.. thats my last hope to bring my cell to file..
and that TWEP i installed was not for my cell.. i installed it by mistakly..
plz plz help..
I feel you can try connecting your phone again to odin and flashing a custom recovery made for your phone. That's all of your hopes left if it is not bricked. Pray to god.
Sent from my GT-I9300 using XDA Free mobile app
you need a driver from samsung. The connect thru adb command.
cibalo said:
you need a driver from samsung. The connect thru adb command.
Click to expand...
Click to collapse
i fixed that problem with nearest repair shop.. he said my root file were deleted.. he repaired my phone but before doing that all my phone internal memory was 5.10gb now it became 1.5gb, when i asked him,he said that was necessory because some of your storage got damaged due to flashing wrong recovery(done by me).... so i want to know whatever he said is right???? if yes then is there any possibilities to repair my damaged storage part.....
thanks XDA developers to for answering my all questions thanks a lot ..
hello
These are the instructions to flash .pac rom on celkon q54 by using spreadtrum upgrade tool
REMEMBER:-the process should be done while the charge is more than 50%
STEP 1 :- install the required usb drivers on your pc
STEP 2:-download your stock rom {.pac file}
STEP 3:-download the spreadtrum upgrade tool for ur PC
extract it in your pc and u will find upgrade download.exe
open it and click on the packet button and load the .pac file
STEP 4:-after that switch off ur phone and remove ur phone battery and connect ur phone to ur computer and again insert ur battery while pressing volume up {or} down button
U will see the downloading process in your computer wait till the process done
THATS IT............................!!
do at ur own risk..........:fingers-crossed::fingers-crossed::fingers-crossed:
Welcome Guys
As we hv got new OTA lp firmware for our device so we dont need to use or flash old lp firmware and also we dont need to use old lp patch method to root it
so here m making a new and very simple guide to root your phone wich is on OTA lolipop 5.1 firmware
Guide
..download the recovery_root file nd xtract it in ur pc
..after extracting u will get folder (philiz recovery) and (rooting)
..Now u need Latest sp flash tools nd drivers (google for it)
..now in SP Flash Tool and open the flash_tool.exe
..now click on scatter-loading nad then a new window will open,in this popup window go to the folder (philiz recovery) and inside the folder u will see the file MT6592_Android_scatter.txt
..now select it nd hit enter...
the files will be loaded in flashtool so now click on download nd then remove battry of ur phone and conect it to pc
..if u hv installed acurate drivers then flashing will be start
..after complete u will get green logo with download complete
..remove the usb from phone and insert battry nd hold the power+volume up botons (neccesory step) for 10 seconds
..when phone will power on after some seconds the recovery will be open
..in recovery tap on mount and storage and then tap on mount usb storage and then conect ur phone to pc
..Then copy root.zip file to ur phone and then disconect ur phone and now in recovery tap on back
..Now install this root file in ur phone using recovery nd reboot ur phone
..Ur phone is rooted now
enjoy:good:
DOWNLOADView attachment recovery_root.zip
Please help me[bricked]
hello my name nugget gamer i am also from India if you can please inform how unbrick my phone it would be very nice of you.
my e131 has been hard bricked as i was trying to unlock the boot loader.
i by accident pressed the all format+download . now my phone doesn't even show the start logo or anything.
please help it will be a great help fr me.
thank you,
nuggetgamer:good::good:
Plz anyone help me
I was downgrading my unite 2 from kitkat to jellybean
it was successfully flashed
But after flash there was no response by device I.e. No boot logo no recovery no charging notification but device is detected by my pc
But whenever m going to flash it it's showing draim failed 4032
Plz help frndz I trye. Many versions of sp flash tool many firmware but the error is same plz help me out
Make sure that you are trying to flash are exact stock firmware.
If it is so, try formatting your phone. (Make sure that don’t format the boot-loader before flashing it.)
Try changing the usb cable, or try changing the usb port in which you are connecting.
If all of these methods fails, try this method:
1) download the "SP Flash Tool V5.1352.01"
2) select the scatter file from your original rom
3) go to "options" in the flash tool>options>connections>battery>select (W/O)battery
4) now go back and click on download and after that connect ur phone WITHOUT BATTERY to pc via usb cable
and then just wait for few min. till the flashing over......
and after flashing disconnect phone from pc and then just start the phone..........
Try and report your points if you succeed. It might help others in future
hit the thanks button if i helped :good: