Database Info

[Q] MCCX a110 Canvas 2 JB 4.1.1 rooting

HELP PLEASE,
sir I m owning a micromax canvas 2 a110 .
recently I rooted my phone ics and flashed CYNUS T2 Rom on my canvas 2 .
when I try to root this rom, nothing happening to me .
tried flash tools as well it just srtuck at 0% no green ring to show progress.
when I choose recovery from path and press f9 to download
I always get an error not all the images are loaded properly you still want to continue I pressed yes nothing happens.
tried cmd as well to flash all commands worked except flashing recovery c:\recovery.img
it shows waiting for device as my device is attached 0123456789abcde
My drivers of mobistel is installed and adb working fine as it can be traced in device manager.
help me to root my jb cynus t2 rom so I can install pre rooted roms thanx....

tanmay5 said:
HELP PLEASE,
sir I m owning a micromax canvas 2 a110 .
recently I rooted my phone ics and flashed CYNUS T2 Rom on my canvas 2 .
when I try to root this rom, nothing happening to me .
tried flash tools as well it just srtuck at 0% no green ring to show progress.
when I choose recovery from path and press f9 to download
I always get an error not all the images are loaded properly you still want to continue I pressed yes nothing happens.
tried cmd as well to flash all commands worked except flashing recovery c:\recovery.img
it shows waiting for device as my device is attached 0123456789abcde
My drivers of mobistel is installed and adb working fine as it can be traced in device manager.
help me to root my jb cynus t2 rom so I can install pre rooted roms thanx....
Click to expand...
Click to collapse
Flash the Stock V2 via the SP Tool.
http://forum.xda-developers.com/show....php?t=1982587 [TUT]MTK Android (Sp flash tool ) tutorial
http://forum.xda-developers.com/show....php?t=1960080 check the first post for the Stock V2 ROM

Even iam facing the same issue sp flash tools cant detect my phone after cynus jb update

mayur.3.92 said:
Even iam facing the same issue sp flash tools cant detect my phone after cynus jb update
Click to expand...
Click to collapse
i think you need the cynus t2 driver..

0. Uninstall the micromax canvas 2 drivers.
1. Install mobistel cynus t2 rom using stock recovery.
2. Connect phone to pc, install mobistel drivers.
3. Remove phone from pc and turn it off. Open device manager in computer. Connect switched off phone to pc. You'll see a device in the COM ports section. Quickly right click it as it vanishes after a few seconds. Right click it and select update device driver.
4. Select the folder in which the cynus t2 drivers are installed. Now the drivers will be installed.
5. Replace the recovery.img with cwm recovery in stock v2 folder.
6. Remove your phone now and let it remain switched off. Open sp flash tool in administrator mode(just in case).
7. Load the scatter loading file and click download button.
8. Connect the phone now. And now everything should go fine.

yeah my mt65xx drivers was not installed after installing i used sp flash tools selected scatter file n recovery pressed download
red bar completes and showing enter usb in 15 sec after that i get an error helpp.............

error 8100 cant find usb port
what should i do know

sir when i use sp flash tool to root jb cynus t2 rom, i selected download when i connected my device it shows 100% with red bar and shows enter usb in 15 sec and after that shows an error 8100 usb port cant be located .
help as com ports are installed for MT65xx and is working properly and named is preloade usb vcom(android) Com 4.

yeah my mt65xx drivers was not installed after installing/updating from drive i selected mobile cynus t2 under program files and said encounted a problem and cant update drivers so i downloaded MT65xx drivers from xda site and browsed and drivers got installed named is preloade usb vcom(android) Com 4. i used sp flash tools selected scatter file n recovery pressed download
red bar completes 100% and showing enter usb in 15 sec after that i get an error helpp.............
error 8100 cant find usb port
what should i do know

this is the error i m getting

tanmay5 said:
this is the error i m getting
Click to expand...
Click to collapse
still no luck ?.
did you try drivers from pdanet?..
did u use "run as admininstrator" for running flashtool... then try without that. because for me, bin4ry rooting donot wrk if i use run as admin option!..
in one tutorial i found
"Please note that, even though it isn't mandatory to select it on the list of images to flash,
preloader file must be present in the same folder as the other partition(s) that you want to flash, or else phone will not be able to enter into download mode."
http://forum.xda-developers.com/showthread.php?t=1982587
so try keeping the cwm recovery.img in the same place as stock recovery was .. ( this is a wild wild gues) ..

Year I m tried a lot of trying I though buying an android will b a good move
But I think I ll stick to windows.
Thanx a lot bro for ur help n effort keep ur work up
I m going 2 sell canvas 2 I thought dev on xda will help me but no one is boughther about jb root
If any news about its root plz tel me

hey , dont loose hope yet bro..i know u hav done all steps correctly. but in my opinion, u need to have more patience ,,..you havent tried all your options yet....
other options are to run spflashtools in a different windows version...may b ur neighbours PC... with drivers freshly installed..
or wait for some jb root tools to come up

mmxa110user said:
hey , dont loose hope yet bro..i know u hav done all steps correctly. but in my opinion, u need to have more patience ,,..you havent tried all your options yet....
other options are to run spflashtools in a different windows version...may b ur neighbours PC... with drivers freshly installed..
or wait for some jb root tools to come up
Click to expand...
Click to collapse
I'll surely wait
thanx dude
if something new comes up please notify me
tk care

Flash tool @ 0%
I tried all possible methods for rooting for months and still the progress bar is @ 0%.... can anyone help me???
you will be given reward in cash.....
pleaseeeeeee.....

Josephxxx said:
I tried all possible methods for rooting for months and still the progress bar is @ 0%.... can anyone help me???
you will be given reward in cash.....
pleaseeeeeee.....
Click to expand...
Click to collapse
Humm it seems all are having similar problem ....
the best solution will be is to proceed freshly i.e format your windows and start again
remember install drivers properly and then use flash tool
see the results n keep posting .....

tanmay5 said:
Humm it seems all are having similar problem ....
the best solution will be is to proceed freshly i.e format your windows and start again
remember install drivers properly and then use flash tool
see the results n keep posting .....
Click to expand...
Click to collapse
If u have CWM or twrp Recovery...just download su update from here - http://download.chainfire.eu/382/SuperSU/UPDATE-SuperSU-v1.93.zip copy it to sd card & flash it via CWM or TWRP. maybe it will help u.

[Q] Bricked Galaxy y Duos

Hey,
I have Samsung Galaxy Y Duos and i installed GingerIceJelly V2 on it. But after flashing it got stuck in the Samsung Galaxy y duos logo.
I can not boot into the ROM/recovery/download because it's stuck on the logo. So my question is, how can i save my phone?
I asked the same question in "Bricked your phone?" thread but it seems that no one knew the solution...

LocDog39 said:
Hey,
I have Samsung Galaxy Y Duos and i installed GingerIceJelly V2 on it. But after flashing it got stuck in the Samsung Galaxy y duos logo.
I can not boot into the ROM/recovery/download because it's stuck on the logo. So my question is, how can i save my phone?
I asked the same question in "Bricked your phone?" thread but it seems that no one knew the solution...
Click to expand...
Click to collapse
you can't do anything about it :crying:, just take it to the shop from where you bought it and tell them it's not working and wish they replace your phone and don't tell them that you have flashed a rom.

Okay thanks

Hey
I got that brick working again.. Just had to go to SD, remove the "_old" from "Boot_old.img" and then i could boot into recovery and download after which i used Odin and now everything is ok.

LocDog39 said:
Hey
I got that brick working again.. Just had to go to SD, remove the "_old" from "Boot_old.img" and then i could boot into recovery and download after which i used Odin and now everything is ok.
Click to expand...
Click to collapse
how do you did it coz i have the same problem i flashed gingericejelly and it is stuck in the logo .....how do you use odin??? plzzzzzzz
help coz i want to make it wor again

groundead said:
how do you did it coz i have the same problem i flashed gingericejelly and it is stuck in the logo .....how do you use odin??? plzzzzzzz
help coz i want to make it wor again
Click to expand...
Click to collapse
http://androidlegend.com/update-samsung-galaxy-y-duos-s6102-with-gingerbread-2-3-6-ddld4/ follow this link

groundead said:
how do you did it coz i have the same problem i flashed gingericejelly and it is stuck in the logo .....how do you use odin??? plzzzzzzz
help coz i want to make it wor again
Click to expand...
Click to collapse
Using odin is not complex .. Its simple ..But you have to take attention... Anytng wrong can make your phone a priceless paperweight.
Requirements
1. PC with windows os.
2. Installed samsung usb driver.
3. Odin for your phone.
3. Odin flashable stock firmware.
Steps
1. Get your phone into odin mode by pressing vol down+power+home keys simultaneously. Then a menu will come. Press vol up to get into odin mode..
2.connect your phone to ur pc by usb..
3.unzip odin and run odin.
4.In odin if there is a colour change (yellow or blue) in left top end (it will be written "com:xx" inside colourd box) your device is ready for flashing.
5.ensure that there is no tick on partition.
6.now unzip stock rom. Possible u will have only one file. Click on PDA and select that file. Now press start.
7. Dont do anything .. Wait patiently . Dont plugg out your phone from usb untill "pass" will come on the top left end.
By these steps ..you can work on odin...
Sent from my GT-S6102 using xda app-developers app

rahulsnair said:
Using odin is not complex .. Its simple ..But you have to take attention... Anytng wrong can make your phone a priceless paperweight.
Requirements
1. PC with windows os.
2. Installed samsung usb driver.
3. Odin for your phone.
3. Odin flashable stock firmware.
Steps
1. Get your phone into odin mode by pressing vol down+power+home keys simultaneously. Then a menu will come. Press vol up to get into odin mode..
2.connect your phone to ur pc by usb..
3.unzip odin and run odin.
4.In odin if there is a colour change (yellow or blue) in left top end (it will be written "com:xx" inside colourd box) your device is ready for flashing.
5.ensure that there is no tick on partition.
6.now unzip stock rom. Possible u will have only one file. Click on PDA and select that file. Now press start.
7. Dont do anything .. Wait patiently . Dont plugg out your phone from usb untill "pass" will come on the top left end.
By these steps ..you can work on odin...
Sent from my GT-S6102 using xda app-developers app
Click to expand...
Click to collapse
Tried and works! THANKS MAN!

my galaxy y duos is dead, it was not rebooting and goes only to downloading mode. i try flash with the custom rom but still it doesnt booting .
plzz help me

rahulsnair said:
Using odin is not complex .. Its simple ..But you have to take attention... Anytng wrong can make your phone a priceless paperweight.
Requirements
1. PC with windows os.
2. Installed samsung usb driver.
3. Odin for your phone.
3. Odin flashable stock firmware.
Steps
1. Get your phone into odin mode by pressing vol down+power+home keys simultaneously. Then a menu will come. Press vol up to get into odin mode..
2.connect your phone to ur pc by usb..
3.unzip odin and run odin.
4.In odin if there is a colour change (yellow or blue) in left top end (it will be written "com:xx" inside colourd box) your device is ready for flashing.
5.ensure that there is no tick on partition.
6.now unzip stock rom. Possible u will have only one file. Click on PDA and select that file. Now press start.
7. Dont do anything .. Wait patiently . Dont plugg out your phone from usb untill "pass" will come on the top left end.
By these steps ..you can work on odin...
Sent from my GT-S6102 using xda app-developers app
Click to expand...
Click to collapse
i tried these thing that you say ..but my samsung galaxy y duos is still stuck at logo ...in recovery mode
" --appling Muti-csc --
E : failed to mount /system (invalid argument)
E : failed to mount /system (invalid argument ) " is written ..what can i do ..please tell me ..

my phone is stuck (boot LOGO) , after flasing !
hey ,,
can anyone sort this out for me ..please !
tried flashing new rom Boyzz v2.0(http://forum.xda-developers.com/showthread.php?t=2507406) via CMW recovery.., tried flasinh the same rom twice , will it work if flash my stock rom ???
tried clearing everything on my SD card , formatted n tried flashing it again .
n when i charge after switching off ..a circle comes inside that battery logo instead of that green stuff .
i can boot into recovery mode after i remove the battery and reinsert it again .
w

[Q] usb debugging mode is not showing in pc

hi fnds i had a bricked mmx a110 phone. for that [email protected] has given a wonderful idea that is
1.First of all download and extract the following file to any specified folder........
A.STOCK JELLYBEAN.RAR
B.SP FLASH TOOLS
*************THE PASSWORD OF SP FLASH TOOLS IS "[email protected]" (without quotation marks)****************
2.now remove ur fone's battery and keep it aside.
3.go to the folder where u have extracted sp flash tools. Run it as administration.
4.click on scatter loading option and browse for the folder where u have extracted jb(or ics rom).
5.now click on firmware upgrade option if flashing jb or if flashing ics click download option.
6.connect ur fone to pc.
Let the process complete. After it completes reinsert the battery and switch on ur fone.
And wid this u should have successfully unbricked ur fone..
Note:U will observe dat ur fone is unrooted again and cwm or twrp recovery has been replaced by stock recovery.
Click to expand...
Click to collapse
i've followed it exactly & i got my phone back with stock rom.
now the only problem is even though i've checked usb debugging mode on in my phone & connecting it to pc to root my phone by using ""one click method/ root with bin4ry/ unroot pro"" it is showing pls connect ur device with usb debugging on even though i have put it in on mode.
but i'm getting like s9081 autoplay window when i connect my phone to pc.
so pls help me
all the thing i want is only root. of there is any way of rooting my phone with out pc it will be very good,
otherwise pls help me to solve above problem.
thank u a lot in advance

[Q] Canvas a117 stuck in bootloop. Tryied everything

Hi, I flashed Vibe ui 2.0 rom yesterday. And there wasn't any recovery on that ROM so I tried Philz recovery after that my phone started booting into recovery every time.
So I fashed the same ROM again. To test which recovery will work properly I tried CWM recovery. After that my phone is stuck in bootloop.
It just show android icon and than restarts.
Tried to go in recovery by pressing Volume up + Power key doesn't work. Pressing Volume Up + Volume Down + power shows two option
Volume up - Recovery Mode
Volume down - Factory Mode
Click on any option again starts rebooting.
Trying to connect phone to laptop but it even starts rebooting on connecting. So SpFlash Tool is not able to do its work.
Fastboot is also not detecting the phone.
I tried installing USB driver but it says can't be done because driver misses digital signature.
Please suggest me some solution by which I can flash stock ROM or boot into recovery so that I can restore my Backup.

While trying spflash tool..remove ur phone battery

removed the battery but SPTool doesn't detect mobile.
attaching device manager screenshot.

try these
Here are the drivers for windows 7 ,i dont think they work on windows 8 and 8.1..
Try these drivers and try spflash tool again..(not including ur battery in phone)
If the drivers didnt work then try on some pc not laptop...
Coz my phone was also not detecting when connected to laptop but it worked when i connected it to pc.
Just for the safer side.
Follow these steps..
Afte installing drivers ,open spflash tool. Then click on scatter loading and brows the scatter file .then click on download button.
After that connect ur phone (excluding ur battery).
And u r good to go..
These steps works for me like a charm .
And hope it works for u too..

finally got it fixed
Final got it fixed. win 7 driver worked for me. windows 8 wasn't allowing me to install driver without digital signature. Once enabling installation without digital signature SPTool recognized my phone and I flashed the ROM.
Huge relief, I didn't have extra phone to use. Now I can use my phone.Now installed Philz recovery and restoring my backup.
Thanks a lot Sactgr for you help.
Sactgr said:
Here are the drivers for windows 7 ,i dont think they work on windows 8 and 8.1..
Try these drivers and try spflash tool again..(not including ur battery in phone)
If the drivers didnt work then try on some pc not laptop...
Coz my phone was also not detecting when connected to laptop but it worked when i connected it to pc.
Just for the safer side.
Follow these steps..
Afte installing drivers ,open spflash tool. Then click on scatter loading and brows the scatter file .then click on download button.
After that connect ur phone (excluding ur battery).
And u r good to go..
These steps works for me like a charm .
And hope it works for u too..
Click to expand...
Click to collapse

No problemo man ...always happy to help

How to install stock rom on celkon q54

hello
These are the instructions to flash .pac rom on celkon q54 by using spreadtrum upgrade tool
REMEMBER:-the process should be done while the charge is more than 50%
STEP 1 :- install the required usb drivers on your pc
STEP 2:-download your stock rom {.pac file}
STEP 3:-download the spreadtrum upgrade tool for ur PC
extract it in your pc and u will find upgrade download.exe
open it and click on the packet button and load the .pac file
STEP 4:-after that switch off ur phone and remove ur phone battery and connect ur phone to ur computer and again insert ur battery while pressing volume up {or} down button
U will see the downloading process in your computer wait till the process done
THATS IT............................!!
do at ur own risk..........:fingers-crossed::fingers-crossed::fingers-crossed: