HELP PLEASE,
sir I m owning a micromax canvas 2 a110 .
recently I rooted my phone ics and flashed CYNUS T2 Rom on my canvas 2 .
when I try to root this rom, nothing happening to me .
tried flash tools as well it just srtuck at 0% no green ring to show progress.
when I choose recovery from path and press f9 to download
I always get an error not all the images are loaded properly you still want to continue I pressed yes nothing happens.
tried cmd as well to flash all commands worked except flashing recovery c:\recovery.img
it shows waiting for device as my device is attached 0123456789abcde
My drivers of mobistel is installed and adb working fine as it can be traced in device manager.
help me to root my jb cynus t2 rom so I can install pre rooted roms thanx....
tanmay5 said:
HELP PLEASE,
sir I m owning a micromax canvas 2 a110 .
recently I rooted my phone ics and flashed CYNUS T2 Rom on my canvas 2 .
when I try to root this rom, nothing happening to me .
tried flash tools as well it just srtuck at 0% no green ring to show progress.
when I choose recovery from path and press f9 to download
I always get an error not all the images are loaded properly you still want to continue I pressed yes nothing happens.
tried cmd as well to flash all commands worked except flashing recovery c:\recovery.img
it shows waiting for device as my device is attached 0123456789abcde
My drivers of mobistel is installed and adb working fine as it can be traced in device manager.
help me to root my jb cynus t2 rom so I can install pre rooted roms thanx....
Click to expand...
Click to collapse
Flash the Stock V2 via the SP Tool.
http://forum.xda-developers.com/show....php?t=1982587 [TUT]MTK Android (Sp flash tool ) tutorial
http://forum.xda-developers.com/show....php?t=1960080 check the first post for the Stock V2 ROM
Even iam facing the same issue sp flash tools cant detect my phone after cynus jb update
mayur.3.92 said:
Even iam facing the same issue sp flash tools cant detect my phone after cynus jb update
Click to expand...
Click to collapse
i think you need the cynus t2 driver..
0. Uninstall the micromax canvas 2 drivers.
1. Install mobistel cynus t2 rom using stock recovery.
2. Connect phone to pc, install mobistel drivers.
3. Remove phone from pc and turn it off. Open device manager in computer. Connect switched off phone to pc. You'll see a device in the COM ports section. Quickly right click it as it vanishes after a few seconds. Right click it and select update device driver.
4. Select the folder in which the cynus t2 drivers are installed. Now the drivers will be installed.
5. Replace the recovery.img with cwm recovery in stock v2 folder.
6. Remove your phone now and let it remain switched off. Open sp flash tool in administrator mode(just in case).
7. Load the scatter loading file and click download button.
8. Connect the phone now. And now everything should go fine.
yeah my mt65xx drivers was not installed after installing i used sp flash tools selected scatter file n recovery pressed download
red bar completes and showing enter usb in 15 sec after that i get an error helpp.............
error 8100 cant find usb port
what should i do know
sir when i use sp flash tool to root jb cynus t2 rom, i selected download when i connected my device it shows 100% with red bar and shows enter usb in 15 sec and after that shows an error 8100 usb port cant be located .
help as com ports are installed for MT65xx and is working properly and named is preloade usb vcom(android) Com 4.
yeah my mt65xx drivers was not installed after installing/updating from drive i selected mobile cynus t2 under program files and said encounted a problem and cant update drivers so i downloaded MT65xx drivers from xda site and browsed and drivers got installed named is preloade usb vcom(android) Com 4. i used sp flash tools selected scatter file n recovery pressed download
red bar completes 100% and showing enter usb in 15 sec after that i get an error helpp.............
error 8100 cant find usb port
what should i do know
this is the error i m getting
tanmay5 said:
this is the error i m getting
Click to expand...
Click to collapse
still no luck ?.
did you try drivers from pdanet?..
did u use "run as admininstrator" for running flashtool... then try without that. because for me, bin4ry rooting donot wrk if i use run as admin option!..
in one tutorial i found
"Please note that, even though it isn't mandatory to select it on the list of images to flash,
preloader file must be present in the same folder as the other partition(s) that you want to flash, or else phone will not be able to enter into download mode."
http://forum.xda-developers.com/showthread.php?t=1982587
so try keeping the cwm recovery.img in the same place as stock recovery was .. ( this is a wild wild gues) ..
Year I m tried a lot of trying I though buying an android will b a good move
But I think I ll stick to windows.
Thanx a lot bro for ur help n effort keep ur work up
I m going 2 sell canvas 2 I thought dev on xda will help me but no one is boughther about jb root
If any news about its root plz tel me
hey , dont loose hope yet bro..i know u hav done all steps correctly. but in my opinion, u need to have more patience ,,..you havent tried all your options yet....
other options are to run spflashtools in a different windows version...may b ur neighbours PC... with drivers freshly installed..
or wait for some jb root tools to come up
mmxa110user said:
hey , dont loose hope yet bro..i know u hav done all steps correctly. but in my opinion, u need to have more patience ,,..you havent tried all your options yet....
other options are to run spflashtools in a different windows version...may b ur neighbours PC... with drivers freshly installed..
or wait for some jb root tools to come up
Click to expand...
Click to collapse
I'll surely wait
thanx dude
if something new comes up please notify me
tk care
Flash tool @ 0%
I tried all possible methods for rooting for months and still the progress bar is @ 0%.... can anyone help me???
you will be given reward in cash.....
pleaseeeeeee.....
Josephxxx said:
I tried all possible methods for rooting for months and still the progress bar is @ 0%.... can anyone help me???
you will be given reward in cash.....
pleaseeeeeee.....
Click to expand...
Click to collapse
Humm it seems all are having similar problem ....
the best solution will be is to proceed freshly i.e format your windows and start again
remember install drivers properly and then use flash tool
see the results n keep posting .....
tanmay5 said:
Humm it seems all are having similar problem ....
the best solution will be is to proceed freshly i.e format your windows and start again
remember install drivers properly and then use flash tool
see the results n keep posting .....
Click to expand...
Click to collapse
If u have CWM or twrp Recovery...just download su update from here - http://download.chainfire.eu/382/SuperSU/UPDATE-SuperSU-v1.93.zip copy it to sd card & flash it via CWM or TWRP. maybe it will help u.
Related
Yes!!!!!!!!! Flash/Unbrick Your Xolo A700
(PLEASE FOLLOW INSTRUCTIONS CAREFULLY,I AM NOT RESPONSIBLE IF YOU TURN IT INTO A PAPERWEIGHT)
Firstly Download Firmware And Tools From This Link
Things Needed
Bricked Xolo A700
Usb Cable
Windows Pc
And A Calm Head
Instructions
Click Here For Youtube Tutorial
Remove Battery From Your Phone And Re-insert It
Connect Your Phone To Pc With Usb Cable
Your PC Will Prompt You To Install The Usb Drivers
Go To-Device Manager>Ports>MTK 65xx Preloader
And Do A Right Click On It>Update Driver>Browse My Computer For Driver(Something Like That)
Select The Driver Folder Where You've Extracted All The Files From The ZIP And Follow The Setup
After Installing Remove Your Phone From PC
Remove And Re-Insert The Battery
Open SP Flash Tool
Click On Scatter Loading
Navigate To The Folder Where You've Extracted The Stock Rom Folder
Select MT6577 Scatter .txt
Click On Download Button>Click On Yes
Connect Your Phone And Wait Till The Process Is Complete
Voila!!!!!!!!!!!!!!!!!!!!!!!!!!
You.................Yes You've Done It
For Those Who Are Facing Black Screen After Flashing
Hit Format-Download Button Instead Of Pressing Download
And Everything Will Be FIne:highfive::highfive:
Need Help
I am getting a continuous restart after the logo appears, I think I have deleted the recovery as it does not goes into recovery also, keeps on restarting, let me know if this method will help me to unbrick my device..
safetydell said:
I am getting a continuous restart after the logo appears, I think I have deleted the recovery as it does not goes into recovery also, keeps on restarting, let me know if this method will help me to unbrick my device..
Click to expand...
Click to collapse
ys you can recover it with help of the above tut
yasirmujtaba said:
ys you can recover it with help of the above tut
Click to expand...
Click to collapse
Thanks, I am out of station as of now, will go home by Saturday, I will surely try this method, hope it helps me to recover my device..
The download link to "firmware and Tools " is not working.
Edit: It is Working now.
Help Needed
yasirmujtaba said:
ys you can recover it with help of the above tut
Click to expand...
Click to collapse
No Luck dude, I did the same as you said but after everything it showed download complete and I started my phone, it came to logo " XOLO " and after that blank screen waited a lot but still the same blank screen, any help from you pls...
sorry for replying late
then you can hit format-download in sp flash tool
it will work for sure
Sent from my Xolo A700 using xda premium
yasirmujtaba said:
sorry for replying late
then you can hit format-download in sp flash tool
it will work for sure
Sent from my Xolo A700 using xda premium
Click to expand...
Click to collapse
Thanks everything went well and was able to get the recovery back but not the stock, booted in CWM recovery and installed your xtrance rom as i was not able to boot the stock rom, it was idle in the boot and was not booting also, anyways thanks now now device is unbricked..
safetydell said:
Thanks everything went well and was able to get the recovery back but not the stock, booted in CWM recovery and installed your xtrance rom as i was not able to boot the stock rom, it was idle in the boot and was not booting also, anyways thanks now now device is unbricked..
Click to expand...
Click to collapse
which option you chose for format I chose "Automatic and format whole flash except bootloader and nav bin something"
it goes dead not even XOLO logo but when chose download it shows xolo logo and then blank
need urgent help
i formatted entiree flash and now sp tool doesnt detect my phone. please help me out.
Install the drivers agin and use diff usb cable
Sent from my IQ446 Magic using xda premium
actually now the phone is not recognized as a phone. but unknown device by the computer. the computer doesnt accept the ini files as drivers saying unknown driver. i m in a pickle now. i tried changing the usb cable still nothing. i think my preloader is also formatted. can u help me in flashing the preloader back?
Didn't try FORMAT
I used the tools to unbrick my xolo a700 struck at bootloop. But no luck. its still the same. WHAT DO U SUGGEST???
Struck at XOLO logo after XOLO animation
I given factory Reset and the bricked.
I tried the procedure after that my xolo mobile struck at XOLO logo after XOLO animation...
Please help....!!!
guys please help us by posting some tried and tested step by step procedure. My Xolo A700s is stuck on boot loop. even i flashed original rom . but dont know what to do with the update file provided along with the rom. guys help
jash2711 said:
actually now the phone is not recognized as a phone. but unknown device by the computer. the computer doesnt accept the ini files as drivers saying unknown driver. i m in a pickle now. i tried changing the usb cable still nothing. i think my preloader is also formatted. can u help me in flashing the preloader back?
Click to expand...
Click to collapse
What did you do? I think I have a similar issue with my tablet, a Pixi 8079.
hi fnds i had a bricked mmx a110 phone. for that [email protected] has given a wonderful idea that is
1.First of all download and extract the following file to any specified folder........
A.STOCK JELLYBEAN.RAR
B.SP FLASH TOOLS
*************THE PASSWORD OF SP FLASH TOOLS IS "[email protected]" (without quotation marks)****************
2.now remove ur fone's battery and keep it aside.
3.go to the folder where u have extracted sp flash tools. Run it as administration.
4.click on scatter loading option and browse for the folder where u have extracted jb(or ics rom).
5.now click on firmware upgrade option if flashing jb or if flashing ics click download option.
6.connect ur fone to pc.
Let the process complete. After it completes reinsert the battery and switch on ur fone.
And wid this u should have successfully unbricked ur fone..
Note:U will observe dat ur fone is unrooted again and cwm or twrp recovery has been replaced by stock recovery.
Click to expand...
Click to collapse
i've followed it exactly & i got my phone back with stock rom.
now the only problem is even though i've checked usb debugging mode on in my phone & connecting it to pc to root my phone by using ""one click method/ root with bin4ry/ unroot pro"" it is showing pls connect ur device with usb debugging on even though i have put it in on mode.
but i'm getting like s9081 autoplay window when i connect my phone to pc.
so pls help me
all the thing i want is only root. of there is any way of rooting my phone with out pc it will be very good,
otherwise pls help me to solve above problem.
thank u a lot in advance
Hi all,
I have a Micromax A110 on which i flashed Ultimate+Galaxy+V4+-+Genuine+Note+3+++S5+UI ROM and BindaasBoost Kernel.
Playstore was not working on this since the ROM installation and it said No Connection always. As suggested by most people i tried some basic steps which didnt work and as final step i did a "Restore to factory Default". Since then the cell is not booting to ROM.(Bricked) :crying:
Its neither getting to CWM recovery as well. Its showing the Note3 logo and then restarts itself. When holding the Power+up+down keys its shows the First screen of recovery mode but soon again shows Note3 boot logo and reboots. Not able to do anything.
Please help Guys !!!
fastboot or adb
VickyPonting said:
Hi all,
I have a Micromax A110 on which i flashed Ultimate+Galaxy+V4+-+Genuine+Note+3+++S5+UI ROM and BindaasBoost Kernel.
Playstore was not working on this since the ROM installation and it said No Connection always. As suggested by most people i tried some basic steps which didnt work and as final step i did a "Restore to factory Default". Since then the cell is not booting to ROM.(Bricked) :crying:
Its neither getting to CWM recovery as well. Its showing the Note3 logo and then restarts itself. When holding the Power+up+down keys its shows the First screen of recovery mode but soon again shows Note3 boot logo and reboots. Not able to do anything.
Please help Guys !!!
Click to expand...
Click to collapse
Can you able to access fastboot or adb ?
Installing SDK ADT
Sakthivel_Subbiah said:
Can you able to access fastboot or adb ?
Click to expand...
Click to collapse
Downloading SDK ADT bundle to check that... (Fingers crossed)
Sakthivel_Subbiah said:
Can you able to access fastboot or adb ?
Click to expand...
Click to collapse
Not getting to ADB or Fastboot as well.. Please help !!!!
Eureka
OMG Finally got it to work.....
Flashing the stock ROM from sptools worked.
I had tried this very first at the beginning but it was not working because incorrect drivers for the cell were installed on my PC (PDANet and vcom)
I removed the incorrect MT65XX drivers using "usbdeview-x64" software.
And then installed the "MT6577 USB VCOM drivers"
then flashed the stock ROM via SPTOOLS and it worked fine..:good:
{ Gosh !!! This was so imp to work as its my WIFE's phone }
VickyPonting said:
OMG Finally got it to work.....
Flashing the stock ROM from sptools worked.
I had tried this very first at the beginning but it was not working because incorrect drivers for the cell were installed on my PC (PDANet and vcom)
I removed the incorrect MT65XX drivers using "usbdeview-x64" software.
And then installed the "MT6577 USB VCOM drivers"
then flashed the stock ROM via SPTOOLS and it worked fine..:good:
{ Gosh !!! This was so imp to work as its my WIFE's phone }
Click to expand...
Click to collapse
:good: always take a backup of your rom... if anything happens you can restore it congrats that you saved your phone...
Hi, I flashed Vibe ui 2.0 rom yesterday. And there wasn't any recovery on that ROM so I tried Philz recovery after that my phone started booting into recovery every time.
So I fashed the same ROM again. To test which recovery will work properly I tried CWM recovery. After that my phone is stuck in bootloop.
It just show android icon and than restarts.
Tried to go in recovery by pressing Volume up + Power key doesn't work. Pressing Volume Up + Volume Down + power shows two option
Volume up - Recovery Mode
Volume down - Factory Mode
Click on any option again starts rebooting.
Trying to connect phone to laptop but it even starts rebooting on connecting. So SpFlash Tool is not able to do its work.
Fastboot is also not detecting the phone.
I tried installing USB driver but it says can't be done because driver misses digital signature.
Please suggest me some solution by which I can flash stock ROM or boot into recovery so that I can restore my Backup.
While trying spflash tool..remove ur phone battery
removed the battery but SPTool doesn't detect mobile.
attaching device manager screenshot.
try these
Here are the drivers for windows 7 ,i dont think they work on windows 8 and 8.1..
Try these drivers and try spflash tool again..(not including ur battery in phone)
If the drivers didnt work then try on some pc not laptop...
Coz my phone was also not detecting when connected to laptop but it worked when i connected it to pc.
Just for the safer side.
Follow these steps..
Afte installing drivers ,open spflash tool. Then click on scatter loading and brows the scatter file .then click on download button.
After that connect ur phone (excluding ur battery).
And u r good to go..
These steps works for me like a charm .
And hope it works for u too..
finally got it fixed
Final got it fixed. win 7 driver worked for me. windows 8 wasn't allowing me to install driver without digital signature. Once enabling installation without digital signature SPTool recognized my phone and I flashed the ROM.
Huge relief, I didn't have extra phone to use. Now I can use my phone.Now installed Philz recovery and restoring my backup.
Thanks a lot Sactgr for you help.
Sactgr said:
Here are the drivers for windows 7 ,i dont think they work on windows 8 and 8.1..
Try these drivers and try spflash tool again..(not including ur battery in phone)
If the drivers didnt work then try on some pc not laptop...
Coz my phone was also not detecting when connected to laptop but it worked when i connected it to pc.
Just for the safer side.
Follow these steps..
Afte installing drivers ,open spflash tool. Then click on scatter loading and brows the scatter file .then click on download button.
After that connect ur phone (excluding ur battery).
And u r good to go..
These steps works for me like a charm .
And hope it works for u too..
Click to expand...
Click to collapse
No problemo man ...always happy to help
Hi
I have just got a PHAB PB1-750M. I cant see any TWRP/Custom roms for it, only the plus version (770M which has a different processor)
Anyone know if another phones roms are compatible?
The processor is a qualcomm 410 (quad core)
thanks
u can root using kingroot or kingoroot... default stock rom http://www.needrom.com/download/lenovo-phab-pb1-750m/ .... flash using qfil on qpst...
I recommend waiting for more time than root now. Cuz I don't see enough literature in the forums for this device yet. Hopefully there will be more users of this device in the near future. I currently own one of these, but I haven't tinkered with it for the fear of bricking it and no real forums available for this device to help me out. I haven't even found any mainstream review for this product. All is see is for the Phab Plus model.
dearbasheer said:
I recommend waiting for more time than root now. Cuz I don't see enough literature in the forums for this device yet. Hopefully there will be more users of this device in the near future. I currently own one of these, but I haven't tinkered with it for the fear of bricking it and no real forums available for this device to help me out. I haven't even found any mainstream review for this product. All is see is for the Phab Plus model.
Click to expand...
Click to collapse
nope....I"m tired of looking for "install TWRP recovery" for this device even though rooted by kingroot. I need TWRP for flashing Xposed.
Any comment?
pb1-750m stuck
Can anybody help me? My phab is stuck on the lenovo logo, i've already done reset to factory settings and wipe cache, but its still stuck on the logo.
If u r stuck on bootloop, u have to flash firmware not other option for lenovo phab.. if u haven't backedup your data m sorry..
Download lenovo drivers, QPST Flash tool, Qualcomm drivers and Stock Rom.. if u dont find these anywhere ask me for links..
1. Install drivers on a pc and restart the pc,
2. Install QPST tool and open device manager,
3. Connect ur device via usb while switched off and press both volume buttons until ur device manager shows Qualcomm device in ports section,
4. After ur phone has been connected open the flash tool, select rom, .xml and path file and start flashing.. wait for 5mins for the device to boot completely..
i am also looking to custom recovery for my phab. is there available now?
Lenovo PB1-750M Stuck
Good Day sir, May I Have the Links on the required files.. My devices is on bootloop.
PB1-750M
Ive tried QFIL but there is a sahara and patching error. Please help
Hello,
i have a Phab 750P
not 750M
can I use the firmware also
best regards
floyd
[email protected] said:
If u r stuck on bootloop, u have to flash firmware not other option for lenovo phab.. if u haven't backedup your data m sorry..
Download lenovo drivers, QPST Flash tool, Qualcomm drivers and Stock Rom.. if u dont find these anywhere ask me for links..
1. Install drivers on a pc and restart the pc,
2. Install QPST tool and open device manager,
3. Connect ur device via usb while switched off and press both volume buttons until ur device manager shows Qualcomm device in ports section,
4. After ur phone has been connected open the flash tool, select rom, .xml and path file and start flashing.. wait for 5mins for the device to boot completely..
Click to expand...
Click to collapse
Please help me!!
Links??
I have the rom, where I find drivers?
OsirisMatus said:
Please help me!!
Links??
I have the rom, where I find drivers?
Click to expand...
Click to collapse
Maybe this could help. Please read through the comments before doing anything. Try at your own risk. I haven't used those on my Phab.
http://www.needrom.com/download/lenovo-phab-pb1-750m/
https://boycracked.com/2016/01/22/h...r-all-android-device-based-on-qualcomm-chips/
And if you do try it, please leave a comment on your experience to help me and others in the future.
bricked phab
[email protected] said:
If u r stuck on bootloop, u have to flash firmware not other option for lenovo phab.. if u haven't backedup your data m sorry..
Download lenovo drivers, QPST Flash tool, Qualcomm drivers and Stock Rom.. if u dont find these anywhere ask me for links..
1. Install drivers on a pc and restart the pc,
2. Install QPST tool and open device manager,
3. Connect ur device via usb while switched off and press both volume buttons until ur device manager shows Qualcomm device in ports section,
4. After ur phone has been connected open the flash tool, select rom, .xml and path file and start flashing.. wait for 5mins for the device to boot completely..
Click to expand...
Click to collapse
hi
My lenovo phab (not phab plus) stuck on recovery mode....not booting into system after updating system....
i tried to flash new rom with QFIL. but phab is not detected by it, saying no port available
tried ADB with adb devices command...phab not listed.....
fastboot not accessible....how to flash rom...kindly help.......
naveen3807 said:
hi
My lenovo phab (not phab plus) stuck on recovery mode....not booting into system after updating system....
i tried to flash new rom with QFIL. but phab is not detected by it, saying no port available
tried ADB with adb devices command...phab not listed.....
fastboot not accessible....how to flash rom...kindly help.......
Click to expand...
Click to collapse
You have to install the Lenovo drivers for your phone to be detected/recognized.
Solved
Thx for ur help.... recovered my phab....
Is der any compatible custom recovery for phab? I need xposed for my phab....can u suggest how to install it...
[email protected] said:
If u r stuck on bootloop, u have to flash firmware not other option for lenovo phab.. if u haven't backedup your data m sorry..
Download lenovo drivers, QPST Flash tool, Qualcomm drivers and Stock Rom.. if u dont find these anywhere ask me for links..
I need link for stock rom( Lollipop 5.1.1) for Phab model, the one which is available may be a lower version , got error sahara protocol error the tool is unable to flash the rom image.
Click to expand...
Click to collapse
I have a "Lenovo PHAB PB1-750 m" Android 6.0.1. I tried to root using "NewKingroot", but it didn't work. You have to please anyone on your Android 6.0.1 root?
could you please post the links? thank you so much
[email protected] said:
If u r stuck on bootloop, u have to flash firmware not other option for lenovo phab.. if u haven't backedup your data m sorry..
Download lenovo drivers, QPST Flash tool, Qualcomm drivers and Stock Rom.. if u dont find these anywhere ask me for links..
1. Install drivers on a pc and restart the pc,
2. Install QPST tool and open device manager,
3. Connect ur device via usb while switched off and press both volume buttons until ur device manager shows Qualcomm device in ports section,
4. After ur phone has been connected open the flash tool, select rom, .xml and path file and start flashing.. wait for 5mins for the device to boot completely..
Click to expand...
Click to collapse
Could you please post the links?
Check my guide here
Cheers.
PB1 750M Root
hi
please follow the instruction provided on this link. https://forum.xda-developers.com/android/help/install-twrp-rooting-phab-plus-rooting-t3290347.
Its XDA forum link.