Yes!!!!!!!!! Flash/Unbrick Your Xolo A700
(PLEASE FOLLOW INSTRUCTIONS CAREFULLY,I AM NOT RESPONSIBLE IF YOU TURN IT INTO A PAPERWEIGHT)
Firstly Download Firmware And Tools From This Link
Things Needed
Bricked Xolo A700
Usb Cable
Windows Pc
And A Calm Head
Instructions
Click Here For Youtube Tutorial
Remove Battery From Your Phone And Re-insert It
Connect Your Phone To Pc With Usb Cable
Your PC Will Prompt You To Install The Usb Drivers
Go To-Device Manager>Ports>MTK 65xx Preloader
And Do A Right Click On It>Update Driver>Browse My Computer For Driver(Something Like That)
Select The Driver Folder Where You've Extracted All The Files From The ZIP And Follow The Setup
After Installing Remove Your Phone From PC
Remove And Re-Insert The Battery
Open SP Flash Tool
Click On Scatter Loading
Navigate To The Folder Where You've Extracted The Stock Rom Folder
Select MT6577 Scatter .txt
Click On Download Button>Click On Yes
Connect Your Phone And Wait Till The Process Is Complete
Voila!!!!!!!!!!!!!!!!!!!!!!!!!!
You.................Yes You've Done It
For Those Who Are Facing Black Screen After Flashing
Hit Format-Download Button Instead Of Pressing Download
And Everything Will Be FIne:highfive::highfive:
Need Help
I am getting a continuous restart after the logo appears, I think I have deleted the recovery as it does not goes into recovery also, keeps on restarting, let me know if this method will help me to unbrick my device..
safetydell said:
I am getting a continuous restart after the logo appears, I think I have deleted the recovery as it does not goes into recovery also, keeps on restarting, let me know if this method will help me to unbrick my device..
Click to expand...
Click to collapse
ys you can recover it with help of the above tut
yasirmujtaba said:
ys you can recover it with help of the above tut
Click to expand...
Click to collapse
Thanks, I am out of station as of now, will go home by Saturday, I will surely try this method, hope it helps me to recover my device..
The download link to "firmware and Tools " is not working.
Edit: It is Working now.
Help Needed
yasirmujtaba said:
ys you can recover it with help of the above tut
Click to expand...
Click to collapse
No Luck dude, I did the same as you said but after everything it showed download complete and I started my phone, it came to logo " XOLO " and after that blank screen waited a lot but still the same blank screen, any help from you pls...
sorry for replying late
then you can hit format-download in sp flash tool
it will work for sure
Sent from my Xolo A700 using xda premium
yasirmujtaba said:
sorry for replying late
then you can hit format-download in sp flash tool
it will work for sure
Sent from my Xolo A700 using xda premium
Click to expand...
Click to collapse
Thanks everything went well and was able to get the recovery back but not the stock, booted in CWM recovery and installed your xtrance rom as i was not able to boot the stock rom, it was idle in the boot and was not booting also, anyways thanks now now device is unbricked..
safetydell said:
Thanks everything went well and was able to get the recovery back but not the stock, booted in CWM recovery and installed your xtrance rom as i was not able to boot the stock rom, it was idle in the boot and was not booting also, anyways thanks now now device is unbricked..
Click to expand...
Click to collapse
which option you chose for format I chose "Automatic and format whole flash except bootloader and nav bin something"
it goes dead not even XOLO logo but when chose download it shows xolo logo and then blank
need urgent help
i formatted entiree flash and now sp tool doesnt detect my phone. please help me out.
Install the drivers agin and use diff usb cable
Sent from my IQ446 Magic using xda premium
actually now the phone is not recognized as a phone. but unknown device by the computer. the computer doesnt accept the ini files as drivers saying unknown driver. i m in a pickle now. i tried changing the usb cable still nothing. i think my preloader is also formatted. can u help me in flashing the preloader back?
Didn't try FORMAT
I used the tools to unbrick my xolo a700 struck at bootloop. But no luck. its still the same. WHAT DO U SUGGEST???
Struck at XOLO logo after XOLO animation
I given factory Reset and the bricked.
I tried the procedure after that my xolo mobile struck at XOLO logo after XOLO animation...
Please help....!!!
guys please help us by posting some tried and tested step by step procedure. My Xolo A700s is stuck on boot loop. even i flashed original rom . but dont know what to do with the update file provided along with the rom. guys help
jash2711 said:
actually now the phone is not recognized as a phone. but unknown device by the computer. the computer doesnt accept the ini files as drivers saying unknown driver. i m in a pickle now. i tried changing the usb cable still nothing. i think my preloader is also formatted. can u help me in flashing the preloader back?
Click to expand...
Click to collapse
What did you do? I think I have a similar issue with my tablet, a Pixi 8079.
Related
Hi ,
I am new to the forum and recently started using custom roms..
I was installing the "rayne rom" using cwm and after formatting data and system..it stopped suddenly and gave a message "symlink failed"
Now the phone does not reboot to CWM recovery and only the previous Devs boot logo comes...PLEASE help...I think i may have bricked it.
@abhi007 said:
Hi ,
I am new to the forum and recently started using custom roms..
I was installing the "rayne rom" using cwm and after formatting data and system..it stopped suddenly and gave a message "symlink failed"
Now the phone does not reboot to CWM recovery and only the previous Devs boot logo comes...PLEASE help...I think i may have bricked it.
Click to expand...
Click to collapse
Are you pressing the recovery buttons correctly? Take out battery then put it back. Then try pressing the Power button and Volume Up + Down together and see if it opens CWM..
ibshar said:
Are you pressing the recovery buttons correctly? Take out battery then put it back. Then try pressing the Power button and Volume Up + Down together and see if it opens CWM..
Click to expand...
Click to collapse
Thanks for the reply..
Yes the CWM recovery came...but i do not have stock Rom in phone and my mem card slot is busted..
Should i try flashing using SP flash tools ???
@abhi007 said:
Thanks for the reply..
Yes the CWM recovery came...but i do not have stock Rom in phone and my mem card slot is busted..
Should i try flashing using SP flash tools ???
Click to expand...
Click to collapse
Then you need to flash the stock ROM with SP Flash tool
@abhi007 said:
Thanks for the reply..
Yes the CWM recovery came...but i do not have stock Rom in phone and my mem card slot is busted..
Should i try flashing using SP flash tools ???
Click to expand...
Click to collapse
Yes..u can flash through SP tool as said by @IBashar..in case..if u dont want to flash through SP tools..I will suggest u to use someone else SD card & paste ur rom in that & then flash through recovery..as I personally feel that flashing through SP Tool is quite cumbursome..
HIT THANKS IF I HELPED U
Sent from my JMP V13 using xda app-developers app
@abhi007 said:
Hi ,
I am new to the forum and recently started using custom roms..
I was installing the "rayne rom" using cwm and after formatting data and system..it stopped suddenly and gave a message "symlink failed"
Now the phone does not reboot to CWM recovery and only the previous Devs boot logo comes...PLEASE help...I think i may have bricked it.
Click to expand...
Click to collapse
Don't worry bro! Try to boot into CWM again because it should be there. Then try to flash the ROM again...
And remember, in future, always take a Nandroid backup before you install anything, mod or ROM. It really helps in case something goes wrong and phone stops working,
ibshar said:
Then you need to flash the stock ROM with SP Flash tool
Click to expand...
Click to collapse
Hey,
I tried flashing using SP tools but it is coming USB device not recognized.(i have installed the drivers in my pc)..... is there any other tool to recover my phone?
Since SP tools does not recognize the device.. it stays at 0%...
Any suggestion is welcome...pls..
@abhi007 said:
Hey,
I tried flashing using SP tools but it is coming USB device not recognized.(i have installed the drivers in my pc)..... is there any other tool to recover my phone?
Since SP tools does not recognize the device.. it stays at 0%...
Any suggestion is welcome...pls..
Click to expand...
Click to collapse
None of the tools will work unless you install the correct Drivers.. So install teh drivers that are given in the SP Flash tool thread and then try.
@abhi007 said:
Hey,
I tried flashing using SP tools but it is coming USB device not recognized.(i have installed the drivers in my pc)..... is there any other tool to recover my phone?
Since SP tools does not recognize the device.. it stays at 0%...
Any suggestion is welcome...pls..
Click to expand...
Click to collapse
I Also Face The Problem With SP Tools 0% Problem Take Out The USB Cable And Insert It Again And After 30-40 Seconds It Will Show The Process Completed 100% And Green Ring Will Be There
Sent from my Micromax A110 (Canvas 2) using xda premium
@abhi007 said:
Hey,
I tried flashing using SP tools but it is coming USB device not recognized.(i have installed the drivers in my pc)..... is there any other tool to recover my phone?
Since SP tools does not recognize the device.. it stays at 0%...
Any suggestion is welcome...pls..
Click to expand...
Click to collapse
see the video below
non of the driver is working, my phone keeps disappearing on device manager it is hard bricked. i installed one custom rom from xda and after rebooting system it is not at all responding either to charging and not to recovery opption also please help bro
Hi! hello every one.......I'm new to XDA .... and may be I'm posting my problem in wrong discussion ...... any how I having a problem with my mt6589 Clone S4......
Yesterday I was using my phone and it's working fine but when I restart my phone I gets stuck on adroid logo..... I tried wiping cache / factory rest....but no luck...
I'm googling my problem for last 14 to 15 hours but I don't find any help full information......
I tried Installing custom rom by going to recovery mode .....but it gets unknown error....
I tried spflash tool ..... but it asks for enabling usb debugging mode but my stucks on android logo..... now basically my question is that how to turn debugging mode on when my phone get stucks on android logo.....
I also can't install cwm recovery because it's also ask for enabling a debugging mode.......
Shahid Niazi said:
Hi! hello every one.......I'm new to XDA .... and may be I'm posting my problem in wrong discussion ...... any how I having a problem with my mt6589 Clone S4......
Yesterday I was using my phone and it's working fine but when I restart my phone I gets stuck on adroid logo..... I tried wiping cache / factory rest....but no luck...
I'm googling my problem for last 14 to 15 hours but I don't find any help full information......
I tried Installing custom rom by going to recovery mode .....but it gets unknown error....
I tried spflash tool ..... but it asks for enabling usb debugging mode but my stucks on android logo..... now basically my question is that how to turn debugging mode on when my phone get stucks on android logo.....
I also can't install cwm recovery because it's also ask for enabling a debugging mode.......
Click to expand...
Click to collapse
So, you flashed a ROM via cwm.
A few lines later you mention that you can't install cwm... is there something I miss????
Whatever;
Can you enter Fastboot/Flash mode manually/via PC and flash a new ROM from there using Flash Tool?
Have you unlocked your bootloader?
Have you tried following these steps?
That's pretty much everything I can think of.
I hope it's just a software brick... :fingers-crossed:
sonyu said:
So, you flashed a ROM via cwm.
A few lines later you mention that you can't install cwm... is there something I miss????
Whatever;
Can you enter Fastboot/Flash mode manually/via PC and flash a new ROM from there using Flash Tool?
Have you unlocked your bootloader?
Have you tried following these steps?
That's pretty much everything I can think of.
I hope it's just a software brick... :fingers-crossed:
Click to expand...
Click to collapse
No I said I can't install a rom via recovery it gets unknown error ....
But Now I have another question how to enter mt5689 in Fastboot/Flash Mode manually via pc .....with flash tool......
plz can anyone tell how to enable usb debugging mode when phone is bricked.....
if you want to install a stock rom via odin, you dont need usb debugging to be on, just boot into odin/download mode (google to see how) and flash a stock rom, then do whatever you need.
Shahid Niazi said:
Hi! hello every one.......I'm new to XDA .... and may be I'm posting my problem in wrong discussion ...... any how I having a problem with my mt6589 Clone S4......
Yesterday I was using my phone and it's working fine but when I restart my phone I gets stuck on adroid logo..... I tried wiping cache / factory rest....but no luck...
I'm googling my problem for last 14 to 15 hours but I don't find any help full information......
I tried Installing custom rom by going to recovery mode .....but it gets unknown error....
I tried spflash tool ..... but it asks for enabling usb debugging mode but my stucks on android logo..... now basically my question is that how to turn debugging mode on when my phone get stucks on android logo.....
I also can't install cwm recovery because it's also ask for enabling a debugging mode.......
Click to expand...
Click to collapse
Now listen to me very carefully! Don't even try to flash a new firmware to your mobile which is not for your mobile and face the same fate as did! Your place is needrom.com. just contact the site administrator for your device model and he will help you... Believe me!
Hi.....thanx for your reply brother.......
I downloaded the rom from needrom.com for my device mtk6589.....which is actually mtk6572
but after installing a rom with spflash tool....... my hand set gets dead....no usb no display no charging nothing.......
I flashed with spflash tool and process completed successfully with no error... but after installation of rom I safely remove usb of my device ... but when I try to turn my phone on then nothing happen.. now my phone is hard bricked.... Now Plz guide me what I should do now....
I heard from someone that I can be fixed with volcano box....
Plz can anyone tell me..
Did you choose correct model and version?
Sent from my Q900 using XDA Premium 4 mobile app
Kobro said:
if you want to install a stock rom via odin, you dont need usb debugging to be on, just boot into odin/download mode (google to see how) and flash a stock rom, then do whatever you need.
Click to expand...
Click to collapse
You just brought a sigh of relief & smile to my face..
Not just that-you helped me restore my phone with less worry..
Thanks a tonne :angel:
software brick
I have a rooted and unlocked bootloader xperia s. What happened is that I was flashing a new software via cwm and its boot img but its stucks on boot img when restarting phone and I haven't enabled usb debugging so I can't install cwn. So anyone can help me???
henno98.hg said:
I have a rooted and unlocked bootloader xperia s. What happened is that I was flashing a new software via cwm and its boot img but its stucks on boot img when restarting phone and I haven't enabled usb debugging so I can't install cwn. So anyone can help me???
Click to expand...
Click to collapse
same problem here ..?? did u get any solution ??
Please Help...
Saraf Vikyath said:
same problem here ..?? did u get any solution ??
Click to expand...
Click to collapse
Nobody? You got a solution already?
I have a brick Xperia SP with UBL and I tried to relock via flashtool and then repair via Pc Companion, but still detects the modifications...
Guys....my question is how to enable usb debugging on a soft bricked device
help me bricked micrmex express 2 plz
my phone too .. I forgot to switch my USB debugging...
Help!!!!!
henno98.hg said:
I have a rooted and unlocked bootloader xperia s. What happened is that I was flashing a new software via cwm and its boot img but its stucks on boot img when restarting phone and I haven't enabled usb debugging so I can't install cwn. So anyone can help me???
Click to expand...
Click to collapse
Help i have the same problem, put a custom boot loader on an asus zenfone 2 ze551ml and I couldnt get my passcode to work so I put it in recovery mode and wipe devit cache and it took longer than it should so I forced phone off and ever since then the phjone turns on but loops. I have tried to manully put the phone fastboot and doing that but didnt work. and even tried to update from ADB and that even didnt work. I have tried everything but no luck. Please help me. or email me too [email protected]
The bootloader of my htc desire s is locked and the phone is also not turning on , my usb debugging modhe was disabled, now i need to unlock the bootloader . help me please
sonyu said:
So, you flashed a ROM via cwm.
A few lines later you mention that you can't install cwm... is there something I miss????
Whatever;
Can you enter Fastboot/Flash mode manually/via PC and flash a new ROM from there using Flash Tool?
Have you unlocked your bootloader?
Have you tried following these steps?
That's pretty much everything I can think of.
I hope it's just a software brick... :fingers-crossed:
Click to expand...
Click to collapse
hello!,i wanna ask some question
so right now my phone is stuck on boot or bootloop,and i actually have the stable rom in my phone but the name is not "update.zip" and i forgot to enable usb debugging,is there anyway to access my internal storage without usb debugging
my phone is xiaomi mi4,thanks!:good:
---------- Post added at 06:59 AM ---------- Previous post was at 06:54 AM ----------
Kobro said:
if you want to install a stock rom via odin, you dont need usb debugging to be on, just boot into odin/download mode (google to see how) and flash a stock rom, then do whatever you need.
Click to expand...
Click to collapse
hello so my phone is currently in bootloop,i have a stable rom in my internal storage but the name is not update.zip so i cant flash the rom,i forgot to enable usb debugging,is there anyway to access the internal storage via pc without usb debugging?,my current phone is mi4 xiaomi
Thanks!
chandrakaii said:
hello so my phone is currently in bootloop,i have a stable rom in my internal storage but the name is not update.zip so i cant flash the rom,i forgot to enable usb debugging,is there anyway to access the internal storage via pc without usb debugging?,my current phone is mi4 xiaomi
Thanks!
Click to expand...
Click to collapse
Stable rom as in stock rom? or a stable custom rom?
in any case. if you have cwm or twrp you should be able to access the file on your computer, or even transfer it to an sd if the phone has it..
if its a custom rom flashable zip though you you might as well just flash it.
if its a stock rom an you cant aces recovery then you have to redownload it to your pc....
Shahid Niazi said:
Hi.....thanx for your reply brother.......
I downloaded the rom from needrom.com for my device mtk6589.....which is actually mtk6572
but after installing a rom with spflash tool....... my hand set gets dead....no usb no display no charging nothing.......
I flashed with spflash tool and process completed successfully with no error... but after installation of rom I safely remove usb of my device ... but when I try to turn my phone on then nothing happen.. now my phone is hard bricked.... Now Plz guide me what I should do now....
I heard from someone that I can be fixed with volcano box....
Plz can anyone tell me..
Click to expand...
Click to collapse
Now you can't unbrick your phone because you overwritten the preloader of your phone. Remember: when flashing with SP flash tool you mustn't flash the preloader. The preloader is the file that makes possible the flashing with SP and now that you have overwritten it or flashed the wrong one, you probably won't be able to recover it. Take it to service center.
Sent by my iPad using Tapatalk
Hi all,
I have a Micromax A110 on which i flashed Ultimate+Galaxy+V4+-+Genuine+Note+3+++S5+UI ROM and BindaasBoost Kernel.
Playstore was not working on this since the ROM installation and it said No Connection always. As suggested by most people i tried some basic steps which didnt work and as final step i did a "Restore to factory Default". Since then the cell is not booting to ROM.(Bricked) :crying:
Its neither getting to CWM recovery as well. Its showing the Note3 logo and then restarts itself. When holding the Power+up+down keys its shows the First screen of recovery mode but soon again shows Note3 boot logo and reboots. Not able to do anything.
Please help Guys !!!
fastboot or adb
VickyPonting said:
Hi all,
I have a Micromax A110 on which i flashed Ultimate+Galaxy+V4+-+Genuine+Note+3+++S5+UI ROM and BindaasBoost Kernel.
Playstore was not working on this since the ROM installation and it said No Connection always. As suggested by most people i tried some basic steps which didnt work and as final step i did a "Restore to factory Default". Since then the cell is not booting to ROM.(Bricked) :crying:
Its neither getting to CWM recovery as well. Its showing the Note3 logo and then restarts itself. When holding the Power+up+down keys its shows the First screen of recovery mode but soon again shows Note3 boot logo and reboots. Not able to do anything.
Please help Guys !!!
Click to expand...
Click to collapse
Can you able to access fastboot or adb ?
Installing SDK ADT
Sakthivel_Subbiah said:
Can you able to access fastboot or adb ?
Click to expand...
Click to collapse
Downloading SDK ADT bundle to check that... (Fingers crossed)
Sakthivel_Subbiah said:
Can you able to access fastboot or adb ?
Click to expand...
Click to collapse
Not getting to ADB or Fastboot as well.. Please help !!!!
Eureka
OMG Finally got it to work.....
Flashing the stock ROM from sptools worked.
I had tried this very first at the beginning but it was not working because incorrect drivers for the cell were installed on my PC (PDANet and vcom)
I removed the incorrect MT65XX drivers using "usbdeview-x64" software.
And then installed the "MT6577 USB VCOM drivers"
then flashed the stock ROM via SPTOOLS and it worked fine..:good:
{ Gosh !!! This was so imp to work as its my WIFE's phone }
VickyPonting said:
OMG Finally got it to work.....
Flashing the stock ROM from sptools worked.
I had tried this very first at the beginning but it was not working because incorrect drivers for the cell were installed on my PC (PDANet and vcom)
I removed the incorrect MT65XX drivers using "usbdeview-x64" software.
And then installed the "MT6577 USB VCOM drivers"
then flashed the stock ROM via SPTOOLS and it worked fine..:good:
{ Gosh !!! This was so imp to work as its my WIFE's phone }
Click to expand...
Click to collapse
:good: always take a backup of your rom... if anything happens you can restore it congrats that you saved your phone...
Bricked XOLO Q3000 (Once Again)
Bricked my XOLO Q3000 Kitkat while trying to install PhilZ custom recovery.Now its stuck in boot loop(the XOLO logo keeps appearing again and again).I backed up the stock boot.img and recovery.img through FlashifyI even tried installing stock recovery through mtk droid tools but to no avail.Now what to do??
SOLVED
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE.So I've become quite of an engineer ..
Haldar_dhruv said:
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE.So I've become quite of an engineer ..
Click to expand...
Click to collapse
How u flashed the philz recovery??
There is no way u can brick ur deivce while flashing recovery if u follow the methods given here.
U can always press the thanks button if ur using any stuff of any dev.
Formatting emmc means formatting ur internal storage too.
ur all data on internal storage will be gone
Bricked Again
This time it happened when I was editing the build.prop .I saved the file as I had the original build.prop file backed up.Then I thought I should restore it.I copied the build.prop file from my sdcard and overwrited it to /system .But now its again struck in boot loop.I just need access to the phone storage so that I can try to replace it again.What should I do???
help help help... avi
i flashed twrp 2.8.0.0, then tried installing hny15 8/1/2015 rom but installation failed , then flashed philz recovery through twrp then reboot but stucked on xolo boot logo. trying to go to recovery but xolo logo flashes again n again, what to do now brother. HELP..! PLZZZZZzzzz,..
:crying:
Xolo Q3000 stuck in Boot Loop
Haldar_dhruv said:
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE.So I've become quite of an engineer ..
Click to expand...
Click to collapse
Hi,
I tried to flash the twrp custom recovery via a flash tool on my device post which the device got stuck in boot loop. Now when i am trying to flash the recovery or even trying to install stock rom nothing is working the device does get recognized on any pc or laptop in spite of the drivers being there... i am new to all this would really appreciate your help in fixing this.
Su007 said:
Hi,
I tried to flash the twrp custom recovery via a flash tool on my device post which the device got stuck in boot loop. Now when i am trying to flash the recovery or even trying to install stock rom nothing is working the device does get recognized on any pc or laptop in spite of the drivers being there... i am new to all this would really appreciate your help in fixing this.
Click to expand...
Click to collapse
Solution : Visit http://forum.xda-developers.com/show...74&postcount=1
"This method is useful for warranty purposes and also for UNBRICKING !!!!
U can revert back to normal rom from any possible bad situations like soft brick or hard brick.
Also u can enjoy ur stock rom.
U will need sp flash tools and flash files."
SEE THE CATEGORY : INSTALL STOCK FIRMWARE
download the flash files and follow the guide
Ask avi3230 as I am not that much experienced,He helped me
GauravBak said:
i flashed twrp 2.8.0.0, then tried installing hny15 8/1/2015 rom but installation failed , then flashed philz recovery through twrp then reboot but stucked on xolo boot logo. trying to go to recovery but xolo logo flashes again n again, what to do now brother. HELP..! PLZZZZZzzzz,..
:crying:
Click to expand...
Click to collapse
Solution : Visit http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1
"This method is useful for warranty purposes and also for UNBRICKING !!!!
U can revert back to normal rom from any possible bad situations like soft brick or hard brick.
Also u can enjoy ur stock rom.
U will need sp flash tools and flash files."
SEE THE CATEGORY : INSTALL STOCK FIRMWARE
download the flash files and follow the guide
Ask avi3230 as I am not that much experienced,He helped me :cyclops:
The Most Important Page
Before u do anything with your beloved XOLO Q3000 visit and bookmark this link http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1
If problem solved hit the Thanks button
Haldar_dhruv said:
This time it happened when I was editing the build.prop .I saved the file as I had the original build.prop file backed up.Then I thought I should restore it.I copied the build.prop file from my sdcard and overwrited it to /system .But now its again struck in boot loop.I just need access to the phone storage so that I can try to replace it again.What should I do???
Click to expand...
Click to collapse
try too flash again the original roms via stock recovery..
Haldar_dhruv said:
Bricked my XOLO Q3000 Kitkat while trying to install PhilZ custom recovery.Now its stuck in boot loop(the XOLO logo keeps appearing again and again).I backed up the stock boot.img and recovery.img through FlashifyI even tried installing stock recovery through mtk droid tools but to no avail.Now what to do??
Click to expand...
Click to collapse
Try flashing the ctr recovery! use flashify and flash either the zip file or the img file! This should work
worked for me
MIUI ROM Woooooo
Yes I have already solved this post Thanks anyway
EAGERLY WAITING FOR MIUI rom to be uplaoded today by avi
KEEP CHECKING HERE http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1
rashr..
Haldar_dhruv said:
Bricked my XOLO Q3000 Kitkat while trying to install PhilZ custom recovery.Now its stuck in boot loop(the XOLO logo keeps appearing again and again).I backed up the stock boot.img and recovery.img through FlashifyI even tried installing stock recovery through mtk droid tools but to no avail.Now what to do??
Click to expand...
Click to collapse
try to flash recovery.img via rashr... It shoul work for u.
mujaid714 said:
try to flash recovery.img via rashr... It shoul work for u.
Click to expand...
Click to collapse
Thanks But the Problem was already solved, would make some sense for others maybe.
Thanks For Helping
Haldar_dhruv said:
Before u do anything with your beloved XOLO Q3000 visit and bookmark this link http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1
If problem solved hit the Thanks button
Click to expand...
Click to collapse
Hi Haldar,
Can you please guide me through step by step please, I am very new to all these. To try anything, My xolo q3000 is stuck in bootloop and is not getting detected on any PC or even turning on to get it flashed to any software.
Any help would be greatly appreciated.
Thanks
alfamine
alfamine said:
Hi Haldar,
Can you please guide me through step by step please, I am very new to all these. To try anything, My xolo q3000 is stuck in bootloop and is not getting detected on any PC or even turning on to get it flashed to any software.
Any help would be greatly appreciated.
Thanks
alfamine
Click to expand...
Click to collapse
Tell me in detail whatever happened. Try the below procedure also.
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE
Haldar_dhruv said:
Tell me in detail whatever happened. Try the below procedure also.
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE
Click to expand...
Click to collapse
I tried to flash to a recovery.img through flashify application and now bricked my phone which is in bootloop now and is neither booting to use other softwares or methods neither is it getting detected on any PCs to flash custom recovery.
I have tried to Volume down + power button and also Volume up + power button to get into recovery menus but none to success,
Just stuck at boot logo of xolo.
Thanks
alfamine
Go to this link here
http://forum.xda-developers.com/q3000/development/xolo-q3000-one-ultimate-thread-t3038259
Then click on unbricking, install adb drivers in pc etc and continue as it says.
Hello My Q-3000 is getting stuck in the boot loop(XOLO Logo ) . Even though I am used Vol+ & power not getting recovery menu ,but odin with red triangle.Please help to solve this problem. I requesting experts to guide me to resolve this issue.
Use Sp flash tool to install stock ROM & u should check ultimate thread
Use Sp flash tool to install stock ROM & u should check ultimate thread
Dear Mr.Sachin Fulzule, thanks for reply I did all that ,but problem is my Phone is not going into recovery mode by pressing VOl+ and Power butten suck in the boot loop XOLO logo is appearing. Please help me
VIKRAM CHINCHOLKAR
vmc809 said:
Dear Mr.Sachin Fulzule, thanks for reply I did all that ,but problem is my Phone is not going into recovery mode by pressing VOl+ and Power butten suck in the boot loop XOLO logo is appearing. Please help me
VIKRAM CHINCHOLKAR
Click to expand...
Click to collapse
If u have pc, then download sp flash tool, stock from for Xolo q3000, drivers for q3000, then install drivers properly & flash it phone using sp flash tool, no need to go to recovery.
sachin.r.fulzele said:
If u have pc, then download sp flash tool, stock from for Xolo q3000, drivers for q3000, then install drivers properly & flash it phone using sp flash tool, no need to go to recovery.
Click to expand...
Click to collapse
Dear Mr. Sachin Fulzule, namaskar I did already what you mentioned, but problem is not solved.Please give some other solution. Waiting for your help.
No more suggestions, submit phone to Xolo care
Sent from my HM NOTE 1W_MIUI6_5.7.23
vmc809 said:
Dear Mr. Sachin Fulzule, namaskar I did already what you mentioned, but problem is not solved.Please give some other solution. Waiting for your help.
Click to expand...
Click to collapse
Have u followed the procedure mentioned in this post.
04 - Flashing stock ROM using SP flash tools
Unbricking guide.
If u did exactly same then the phone should boot normally.
Also check the battery charging, maybe its not sufficiently charged.
avi3230 said:
Have u followed the procedure mentioned in this post.
Click to expand...
Click to collapse
I've told him, the same earlier, but he replied that he had done it, still no success.
Sent from HM NOTE 1W_MIUI6_5.8.6
Even i too faced the same problem..but managed to flash by sp tools..make sure ur ports are working and drivers are properly installed..and downloaded file is not corrupted..
mujaid714 said:
Even i too faced the same problem..but managed to flash by sp tools..make sure ur ports are working and drivers are properly installed..and downloaded file is not corrupted..
Click to expand...
Click to collapse
It's because u should either install vcom drivers or cynus drivers for xolo q3000, availability of both causing the trouble.
Sent from HM NOTE 1W_MIUI6_5.8.6