Hi! hello every one.......I'm new to XDA .... and may be I'm posting my problem in wrong discussion ...... any how I having a problem with my mt6589 Clone S4......
Yesterday I was using my phone and it's working fine but when I restart my phone I gets stuck on adroid logo..... I tried wiping cache / factory rest....but no luck...
I'm googling my problem for last 14 to 15 hours but I don't find any help full information......
I tried Installing custom rom by going to recovery mode .....but it gets unknown error....
I tried spflash tool ..... but it asks for enabling usb debugging mode but my stucks on android logo..... now basically my question is that how to turn debugging mode on when my phone get stucks on android logo.....
I also can't install cwm recovery because it's also ask for enabling a debugging mode.......
Shahid Niazi said:
Hi! hello every one.......I'm new to XDA .... and may be I'm posting my problem in wrong discussion ...... any how I having a problem with my mt6589 Clone S4......
Yesterday I was using my phone and it's working fine but when I restart my phone I gets stuck on adroid logo..... I tried wiping cache / factory rest....but no luck...
I'm googling my problem for last 14 to 15 hours but I don't find any help full information......
I tried Installing custom rom by going to recovery mode .....but it gets unknown error....
I tried spflash tool ..... but it asks for enabling usb debugging mode but my stucks on android logo..... now basically my question is that how to turn debugging mode on when my phone get stucks on android logo.....
I also can't install cwm recovery because it's also ask for enabling a debugging mode.......
Click to expand...
Click to collapse
So, you flashed a ROM via cwm.
A few lines later you mention that you can't install cwm... is there something I miss????
Whatever;
Can you enter Fastboot/Flash mode manually/via PC and flash a new ROM from there using Flash Tool?
Have you unlocked your bootloader?
Have you tried following these steps?
That's pretty much everything I can think of.
I hope it's just a software brick... :fingers-crossed:
sonyu said:
So, you flashed a ROM via cwm.
A few lines later you mention that you can't install cwm... is there something I miss????
Whatever;
Can you enter Fastboot/Flash mode manually/via PC and flash a new ROM from there using Flash Tool?
Have you unlocked your bootloader?
Have you tried following these steps?
That's pretty much everything I can think of.
I hope it's just a software brick... :fingers-crossed:
Click to expand...
Click to collapse
No I said I can't install a rom via recovery it gets unknown error ....
But Now I have another question how to enter mt5689 in Fastboot/Flash Mode manually via pc .....with flash tool......
plz can anyone tell how to enable usb debugging mode when phone is bricked.....
if you want to install a stock rom via odin, you dont need usb debugging to be on, just boot into odin/download mode (google to see how) and flash a stock rom, then do whatever you need.
Shahid Niazi said:
Hi! hello every one.......I'm new to XDA .... and may be I'm posting my problem in wrong discussion ...... any how I having a problem with my mt6589 Clone S4......
Yesterday I was using my phone and it's working fine but when I restart my phone I gets stuck on adroid logo..... I tried wiping cache / factory rest....but no luck...
I'm googling my problem for last 14 to 15 hours but I don't find any help full information......
I tried Installing custom rom by going to recovery mode .....but it gets unknown error....
I tried spflash tool ..... but it asks for enabling usb debugging mode but my stucks on android logo..... now basically my question is that how to turn debugging mode on when my phone get stucks on android logo.....
I also can't install cwm recovery because it's also ask for enabling a debugging mode.......
Click to expand...
Click to collapse
Now listen to me very carefully! Don't even try to flash a new firmware to your mobile which is not for your mobile and face the same fate as did! Your place is needrom.com. just contact the site administrator for your device model and he will help you... Believe me!
Hi.....thanx for your reply brother.......
I downloaded the rom from needrom.com for my device mtk6589.....which is actually mtk6572
but after installing a rom with spflash tool....... my hand set gets dead....no usb no display no charging nothing.......
I flashed with spflash tool and process completed successfully with no error... but after installation of rom I safely remove usb of my device ... but when I try to turn my phone on then nothing happen.. now my phone is hard bricked.... Now Plz guide me what I should do now....
I heard from someone that I can be fixed with volcano box....
Plz can anyone tell me..
Did you choose correct model and version?
Sent from my Q900 using XDA Premium 4 mobile app
Kobro said:
if you want to install a stock rom via odin, you dont need usb debugging to be on, just boot into odin/download mode (google to see how) and flash a stock rom, then do whatever you need.
Click to expand...
Click to collapse
You just brought a sigh of relief & smile to my face..
Not just that-you helped me restore my phone with less worry..
Thanks a tonne :angel:
software brick
I have a rooted and unlocked bootloader xperia s. What happened is that I was flashing a new software via cwm and its boot img but its stucks on boot img when restarting phone and I haven't enabled usb debugging so I can't install cwn. So anyone can help me???
henno98.hg said:
I have a rooted and unlocked bootloader xperia s. What happened is that I was flashing a new software via cwm and its boot img but its stucks on boot img when restarting phone and I haven't enabled usb debugging so I can't install cwn. So anyone can help me???
Click to expand...
Click to collapse
same problem here ..?? did u get any solution ??
Please Help...
Saraf Vikyath said:
same problem here ..?? did u get any solution ??
Click to expand...
Click to collapse
Nobody? You got a solution already?
I have a brick Xperia SP with UBL and I tried to relock via flashtool and then repair via Pc Companion, but still detects the modifications...
Guys....my question is how to enable usb debugging on a soft bricked device
help me bricked micrmex express 2 plz
my phone too .. I forgot to switch my USB debugging...
Help!!!!!
henno98.hg said:
I have a rooted and unlocked bootloader xperia s. What happened is that I was flashing a new software via cwm and its boot img but its stucks on boot img when restarting phone and I haven't enabled usb debugging so I can't install cwn. So anyone can help me???
Click to expand...
Click to collapse
Help i have the same problem, put a custom boot loader on an asus zenfone 2 ze551ml and I couldnt get my passcode to work so I put it in recovery mode and wipe devit cache and it took longer than it should so I forced phone off and ever since then the phjone turns on but loops. I have tried to manully put the phone fastboot and doing that but didnt work. and even tried to update from ADB and that even didnt work. I have tried everything but no luck. Please help me. or email me too [email protected]
The bootloader of my htc desire s is locked and the phone is also not turning on , my usb debugging modhe was disabled, now i need to unlock the bootloader . help me please
sonyu said:
So, you flashed a ROM via cwm.
A few lines later you mention that you can't install cwm... is there something I miss????
Whatever;
Can you enter Fastboot/Flash mode manually/via PC and flash a new ROM from there using Flash Tool?
Have you unlocked your bootloader?
Have you tried following these steps?
That's pretty much everything I can think of.
I hope it's just a software brick... :fingers-crossed:
Click to expand...
Click to collapse
hello!,i wanna ask some question
so right now my phone is stuck on boot or bootloop,and i actually have the stable rom in my phone but the name is not "update.zip" and i forgot to enable usb debugging,is there anyway to access my internal storage without usb debugging
my phone is xiaomi mi4,thanks!:good:
---------- Post added at 06:59 AM ---------- Previous post was at 06:54 AM ----------
Kobro said:
if you want to install a stock rom via odin, you dont need usb debugging to be on, just boot into odin/download mode (google to see how) and flash a stock rom, then do whatever you need.
Click to expand...
Click to collapse
hello so my phone is currently in bootloop,i have a stable rom in my internal storage but the name is not update.zip so i cant flash the rom,i forgot to enable usb debugging,is there anyway to access the internal storage via pc without usb debugging?,my current phone is mi4 xiaomi
Thanks!
chandrakaii said:
hello so my phone is currently in bootloop,i have a stable rom in my internal storage but the name is not update.zip so i cant flash the rom,i forgot to enable usb debugging,is there anyway to access the internal storage via pc without usb debugging?,my current phone is mi4 xiaomi
Thanks!
Click to expand...
Click to collapse
Stable rom as in stock rom? or a stable custom rom?
in any case. if you have cwm or twrp you should be able to access the file on your computer, or even transfer it to an sd if the phone has it..
if its a custom rom flashable zip though you you might as well just flash it.
if its a stock rom an you cant aces recovery then you have to redownload it to your pc....
Shahid Niazi said:
Hi.....thanx for your reply brother.......
I downloaded the rom from needrom.com for my device mtk6589.....which is actually mtk6572
but after installing a rom with spflash tool....... my hand set gets dead....no usb no display no charging nothing.......
I flashed with spflash tool and process completed successfully with no error... but after installation of rom I safely remove usb of my device ... but when I try to turn my phone on then nothing happen.. now my phone is hard bricked.... Now Plz guide me what I should do now....
I heard from someone that I can be fixed with volcano box....
Plz can anyone tell me..
Click to expand...
Click to collapse
Now you can't unbrick your phone because you overwritten the preloader of your phone. Remember: when flashing with SP flash tool you mustn't flash the preloader. The preloader is the file that makes possible the flashing with SP and now that you have overwritten it or flashed the wrong one, you probably won't be able to recover it. Take it to service center.
Sent by my iPad using Tapatalk
Related
I have Samsung Galaxy Fit-S5670 with android 2.3.4.
Few days before i have rooted my device for some days. After that i unrooted it due to some problems occurring in it. The WiFi keep on always, and never switched off. Also unable to tether hotspot.
USB connection also not working with windows 7 PC. It keeps on saying "USB not recognized", also installed drivers, but nothing happened.
Now I tried to install CyanogenMod 10 using recovery mode. It said "Successful" but my device is not starting, samsung screen is coming and next "Android . . . " is coming . nothing further is happening.
Please anybody help me.
mohitum007 said:
I have Samsung Galaxy Fit-S5670 with android 2.3.4.
Few days before i have rooted my device for some days. After that i unrooted it due to some problems occurring in it. The WiFi keep on always, and never switched off. Also unable to tether hotspot.
USB connection also not working with windows 7 PC. It keeps on saying "USB not recognized", also installed drivers, but nothing happened.
Now I tried to install CyanogenMod 10 using recovery mode. It said "Successful" but my device is not starting, samsung screen is coming and next "Android . . . " is coming . nothing further is happening.
Please anybody help me.
Click to expand...
Click to collapse
Did you installed ClockWorkMod Recovery or you used stock recovery to install the ROM?
mohitum007 said:
I have Samsung Galaxy Fit-S5670 with android 2.3.4.
Few days before i have rooted my device for some days. After that i unrooted it due to some problems occurring in it. The WiFi keep on always, and never switched off. Also unable to tether hotspot.
USB connection also not working with windows 7 PC. It keeps on saying "USB not recognized", also installed drivers, but nothing happened.
Now I tried to install CyanogenMod 10 using recovery mode. It said "Successful" but my device is not starting, samsung screen is coming and next "Android . . . " is coming . nothing further is happening.
Please anybody help me.
Click to expand...
Click to collapse
Install latest samsung driver
flash samsung firmware via odin
Abhi04 said:
Install latest samsung driver
flash samsung firmware via odin
Click to expand...
Click to collapse
He said that he installed the drivers.Try to uninstall them and install Kies from Samsung and try to connect with that,but you need to flash the stock firmware via Odin
mohitum007 said:
I have Samsung Galaxy Fit-S5670 with android 2.3.4.
Few days before i have rooted my device for some days. After that i unrooted it due to some problems occurring in it. The WiFi keep on always, and never switched off. Also unable to tether hotspot.
USB connection also not working with windows 7 PC. It keeps on saying "USB not recognized", also installed drivers, but nothing happened.
Now I tried to install CyanogenMod 10 using recovery mode. It said "Successful" but my device is not starting, samsung screen is coming and next "Android . . . " is coming . nothing further is happening.
Please anybody help me.
Click to expand...
Click to collapse
gabyif said:
Did you installed ClockWorkMod Recovery or you used stock recovery to install the ROM?
Click to expand...
Click to collapse
Where to install it ? On device or PC? I am stucked in the device boot unable to start device.
mohitum007 said:
Where to install it ? On device or PC? I am stucked in the device boot unable to start device.
Click to expand...
Click to collapse
CWM install on the device and then try to reflash CM 10.1
Download it from here:http://forum.xda-developers.com/showthread.php?t=1339640
gabyif said:
CWM install on the device and then try to reflash CM 10.1
Download it from here:http://forum.xda-developers.com/showthread.php?t=1339640
Click to expand...
Click to collapse
Can i install it using recovery mode? Because usb not recognized on PC that is why i can't install through Odin Multi Downloader.
mohitum007 said:
Can i install it using recovery mode? Because usb not recognized on PC that is why i can't install through Odin Multi Downloader.
Click to expand...
Click to collapse
No you can't,but you need to go in Download mode(Power+Volume Down+Home button) to install it.
It should recognize your phone
gabyif said:
No you can't,but you need to go in Download mode(Power+Volume Down+Home button) to install it.
It should recognize your phone
Click to expand...
Click to collapse
But it is not recognized in download mode too......:'(
mohitum007 said:
But it is not recognized in download mode too......:'(
Click to expand...
Click to collapse
is it going in download mode ?
if it is and mobile is not recognized then try reinstalling mobile usb drivers
Sent from my GT-S5670 using xda premium
soham jambhekar said:
is it going in download mode ?
if it is and mobile is not recognized then try reinstalling mobile usb drivers
Sent from my GT-S5670 using xda premium
Click to expand...
Click to collapse
Ok i will try that too...and check if it works !!!
Do you have any download link for latest drivers?
www.mediafire.com/?h4waxh8r5twuwuq
this is the link to samsung usb driver installer
Sent from my GT-S5670 using xda premium
not connect kaise
hi
i m using jana rom when i try to connect whit samsung kaise there no responses found..
what to do ??
nirajkrm1 said:
hi
i m using jana rom when i try to connect whit samsung kaise there no responses found..
what to do ??
Click to expand...
Click to collapse
Maybe your baseband version isn't of ur country/region. Also check ur drivers
Sent Via XDA™ Premium
IT seems to me that u tried to instal cm10.1 with stock recovery( isn't it). if u did u probably soft bricked ur device.. if not if u hv installed cwm recovery 5 by tj style using odin multi downloader...then tried to install cm10.1 then wipe data and try installing the rom again....
Second; if u hv stock recovery + soft bricked ur device and u cannot connect to ur computer then probably u hv no choice but to goto local mobile repair center... in your device the charging ic may have been damaged which will they replace for rs.200/- and flashing ur device back to normal will cost u rs.200/- extra....using their circuits..something z-box....
third; if u went to authorised samsung care they will blindly charge u rs.4000/- for changing motherboard and messing up the software...which noboy wants.. or ucan makeup a story and fool them and replace ur motherboard if under warranty...
fourth; try to check with local mobile repairwallah and u can yourself flash stock rom at local internet cafe...and then root then instal cwm5 recovery then install diifferent roms for our device.....
take care..:good: luck
i need a recovery for galaxy fit
hi i have bricked my samsung galaxy fit beaucouse after root with apply from sd card i tried to install a room with my stock recovery (orginal recovery) and now when i switch on it shows only logo of sasmung. my charging ic is not working and doesnt so please help me with a recovery than can be installed from stock recovery please helppppp i know how to use odin beaucouse i have rooted and flashed so much phones but is not working to me helpp meeee pls
bosi255 said:
hi i have bricked my samsung galaxy fit beaucouse after root with apply from sd card i tried to install a room with my stock recovery (orginal recovery) and now when i switch on it shows only logo of sasmung. my charging ic is not working and doesnt so please help me with a recovery than can be installed from stock recovery please helppppp i know how to use odin beaucouse i have rooted and flashed so much phones but is not working to me helpp meeee pls
Click to expand...
Click to collapse
can you go to download mode? ( try power+volumeDown+home keys). if you can then simply flash a stock firmware from samfirmware.com via odin.
if you can't go to download mode then take a look at this conversation:
http://forum.xda-developers.com/showthread.php?t=2413137
ehsan-black said:
can you go to download mode? ( try power+volumeDown+home keys). if you can then simply flash a stock firmware from samfirmware.com via odin.
if you can't go to download mode then take a look at this conversation:
http://forum.xda-developers.com/showthread.php?t=2413137
Click to expand...
Click to collapse
Yes, but here is more precise link:
http://forum.xda-developers.com/showthread.php?t=2413137#4
please help me
ehsan-black said:
can you go to download mode? ( try power+volumeDown+home keys). if you can then simply flash a stock firmware from samfirmware.com via odin.
if you can't go to download mode then take a look at this conversation:
http://forum.xda-developers.com/showthread.php?t=2413137
Click to expand...
Click to collapse
yes i can go to download mode and to recovery mode but i have stock recovery and my charging ic dosent work and cable to so is inposible to connect to pc i want only a custum recovery that can be installed from stock recovery even a temporary recovery to install with apply from sd card beaucouse i havent find one for my galaxy fit.i find one but it was for galaxy young but dosent work please helppppppppp
helppp
hi i have bricked my samsung galaxy fit beaucouse after root with apply from sd card i tried to install a room with my stock recovery (orginal recovery) and now when i switch on it shows only logo of sasmung. my charging ic is not working and doesnt so please help me with a recovery than can be installed from stock recovery please helppppp i know how to use odin beaucouse i have rooted and flashed so much phones but is not working to me helpp meeee pls
i can go to download mode and to recovery mode but i have stock recovery and my charging ic dosent work and cable to so is inposible to connect to pc i want only a custum recovery that can be installed from stock recovery even a temporary recovery to install with apply from sd card beaucouse i havent find one for my galaxy fit.i find one but it was for galaxy young but dosent work please helppppppppp
hi,
I've been looking around the forum and couldn't find a solution for my problem
I bought a Xperia L for my child and based on my experienced with my Nexus 4 I wanted to install a custom Rom.
the phone is free sim. I 'm allowed to free bootloacker it.
After enabling USB debbugging ON and installing the drivers with flashtool (vers 9.13 on win 7 64bit) I managed to boot in flash mode and unlock the bootloader via flashtool (thanks to the key provided by Sony) .
the phone rebooted with the Sony logo and those coloured lights.AND USB debbuging OFF !!!!
I've tried to flash a original sony ftf (in put into the firmware C2105_15.0.A.2.17_CE or C2105_15.3.A.1.14_CE file in flashtool) but no luck. it tells me that is preparing the files and then reboot into "device" (usual reboot)
After removing the battery I've rebooted in fastboot and somehow managed to flash the custom Rom (.img) from Phantom (I can see his logo when I turn the phone on). but that's it.
I'm somehow suspecting the USB debbuging OFF creating me issues and the SD card being blank to not help either.
I've installed the PC companion lately but it does not recognized it either...
I'm quite a newby and my goals are 1st to have it working again then to root it in order to install a custom ROM.
Any help or suggestion is welcome
Try removing battery for 2-3 minutes and se if that can get it to boot or at least get to recovery.
Redzo said:
Try removing battery for 2-3 minutes and se if that can get it to boot or at least get to recovery.
Click to expand...
Click to collapse
I'm in recovery mode now.
I'll look in the forum for a modus opererando from that point but again any additional suggestion/help is welcome
ok.
I'm in the recovery mode v5.0.3.5 by TZ (guess is the phanton owner)
My SD card is formated and I've copied the phanton.zip file. tried to install... no luck. also copied the sony factory file and still no luck.
the menu gives me different options but not sure what to do. will still look in the forum but no luck so far....
I have not rooted the device (and do not know what to do), still cannot flash the factory rom with flashtool (as described above) ...
Any help on where to start from the recovery mode?
francoism said:
hi,
I've been looking around the forum and couldn't find a solution for my problem
I bought a Xperia L for my child and based on my experienced with my Nexus 4 I wanted to install a custom Rom.
the phone is free sim. I 'm allowed to free bootloacker it.
After enabling USB debbugging ON and installing the drivers with flashtool (vers 9.13 on win 7 64bit) I managed to boot in flash mode and unlock the bootloader via flashtool (thanks to the key provided by Sony) .
the phone rebooted with the Sony logo and those coloured lights.AND USB debbuging OFF !!!!
I've tried to flash a original sony ftf (in put into the firmware C2105_15.0.A.2.17_CE or C2105_15.3.A.1.14_CE file in flashtool) but no luck. it tells me that is preparing the files and then reboot into "device" (usual reboot)
After removing the battery I've rebooted in fastboot and somehow managed to flash the custom Rom (.img) from Phantom (I can see his logo when I turn the phone on). but that's it.
I'm somehow suspecting the USB debbuging OFF creating me issues and the SD card being blank to not help either.
I've installed the PC companion lately but it does not recognized it either...
I'm quite a newby and my goals are 1st to have it working again then to root it in order to install a custom ROM.
Any help or suggestion is welcome
Click to expand...
Click to collapse
Welcome to XL world!
I think that you are a little bit confused!Relax...
First of all...,ftf is stock rom and .img is kernel.
So,first u have to unlock the bootloader and then u have to flash stock rom again otherwise u'll get into bootloop.Then u have to flash a custom kernel with CWM (which u can find in Development sector or in Original Development sector) and then flash a custom ROM via CWM from Development sector...
Hope I helped...
kazabubu said:
Welcome to XL world!
I think that you are a little bit confused!Relax...
First of all...,ftf is stock rom and .img is kernel.
So,first u have to unlock the bootloader and then u have to flash stock rom again otherwise u'll get into bootloop.Then u have to flash a custom kernel with CWM (which u can find in Development sector or in Original Development sector) and then flash a custom ROM via CWM from Development sector...
Hope I helped...
Click to expand...
Click to collapse
thanks Kazabubu, I understand the steps you described and :
1) I have successfully unlock the bootloader
2) TRIED to flash the stock rom (ftf) (using flashtool, in flash mode ) but the phone was staying in "Preparing files for flashing" and then disconnecting
3) I think I managed to flash a custom kernel ( phanton) in fastboot mode
4) reboot in recovery mode
5) tried unsuccessfully to install a ROM (stock or custom) under recovery mode.
NOW... extremely strangely I left my phone connected to my PC and went to buy some stuffs... When I came back flashtool had flashed the stock rom... and it's working again.... do not ask me how... I have no idea.
I''ll leave it like that and will "only" try to root it as it is.
I'll close the thread and again thanks for you help guys!
Just flash a custom kernel first then boot into CWM and then flash a SuperSU.zip from the recovery.. It will directly root your phone..
Here is the link for the Zip file..http://download.chainfire.eu/204
Sent from my LT26ii using xda app-developers app
can u help me ?
varunpilankar said:
Just flash a custom kernel first then boot into CWM and then flash a SuperSU.zip from the recovery.. It will directly root your phone..
Here is the link for the Zip file..http://download.chainfire.eu/204
Sent from my LT26ii using xda app-developers app
Click to expand...
Click to collapse
I tried to root via VROOT , next step i installed http://forum.xda-developers.com/showthread.php?t=2598697
dexteroid.
now my phone wont start, it only shows black screen....can you help me
Is it showing you red light when you keep on charge?
Sent from my LT26ii using xda app-developers app
okay chill!
Open flashtoot Dont connected your phone
click on the thunder logo..then flashmode the choose the file you want to flash..it will prepare the file..
After that it will prompt you to connect your phone
press vol.down and connect your phone!
Hope it helps~
francoism said:
hi,
I've been looking around the forum and couldn't find a solution for my problem
I bought a Xperia L for my child and based on my experienced with my Nexus 4 I wanted to install a custom Rom.
the phone is free sim. I 'm allowed to free bootloacker it.
After enabling USB debbugging ON and installing the drivers with flashtool (vers 9.13 on win 7 64bit) I managed to boot in flash mode and unlock the bootloader via flashtool (thanks to the key provided by Sony) .
the phone rebooted with the Sony logo and those coloured lights.AND USB debbuging OFF !!!!
I've tried to flash a original sony ftf (in put into the firmware C2105_15.0.A.2.17_CE or C2105_15.3.A.1.14_CE file in flashtool) but no luck. it tells me that is preparing the files and then reboot into "device" (usual reboot)
After removing the battery I've rebooted in fastboot and somehow managed to flash the custom Rom (.img) from Phantom (I can see his logo when I turn the phone on). but that's it.
I'm somehow suspecting the USB debbuging OFF creating me issues and the SD card being blank to not help either.
I've installed the PC companion lately but it does not recognized it either...
I'm quite a newby and my goals are 1st to have it working again then to root it in order to install a custom ROM.
Any help or suggestion is welcome
Click to expand...
Click to collapse
its very easy my friend just download cm11 google for xperia l transfer it to ext sd card then go to recovery mod factory reset everything wipe cache and delvik too then install cm11 zip
hey every one 2 days back i was able to flash lewa os rom on my canvas 2 .. when i found this updater in apps i downloaded the update of that rom i think it is called O.T.A.. i went to recovery mode and flashed it ..i flashed that update with out enabling usb debugging ..
NOW I BRICKED MY PHONE all i am able to see is a boot logo all the time like it restarts and shows that boot logo i am unable to boot into recovery or factory mode.. i have been trying to unbrick it for hours and days as its the only phone i have .. please help me out of this cant install the drivers or my pc wont recognize the phone it ends up unable to install usb .. am really worried i cant buy an other phone please any one help me out of this .... i want to solve it solve it asap as i have no other phone to use please .. I CAN'T ENTER DOWNLOAD OR RECOVERY MODE OR ANY OF IT WHEN I TRY TO ENTER RECOVERY MODE WHAT IT DOSE IS JUST RESTARTS AND SHOWS THE LOGO AGAIN AND AGAIN... PLEASE HELP ME OUT OF THIS
Try flashing Stock JB ROM by Paplu using SPFlashTools.
http://forum.xda-developers.com/showthread.php?t=2167244
I never flashed LeWa OS but don't Update Over the Air (OTA) as it might be downloading the update for that device (as it a ported ROM (I think)) the ROM was actually made for.
And don't worry. All of us had bricked devices at some point of time.
I prefer you use SPFlashTools on a Win 7 PC as drivers are a bit complicated to install on Win 8 as they are not signed. After that, download CWM img and flash it using SPFlashTools (tutorial to flash just recovery is also given or you ask if you are not able to do it) as recovery flashed through Mobile Uncle Tools also doesn't boot after factory resets and a couple of more situations.
I rooted my galaxy grand win.. and installed transwin rom. But when I try to connect my phone to pc it's only charging and not able to transfer any data.. and it's not connecting to odin also.. when tried to flash another rom I got stuck in cwm recovery mode for almost 5 days..I searched on Google I found that using stock flash file I can come out of cwm.. so I booted into stock mode using "stock flash zip file" via install zip .. . Now I m not able to boot into cwm recovery mode.. please Help me to connect my phone to pc. And to boot into cwm recovery. Thanks in advance.. rom manager also not helping..now I installed stock rom which I have backed up before.. but still not able to connect with my pc...
Please Help me to boot in cwm recovery and to connect with odin.. ..
Sagar Kininge said:
I rooted my galaxy grand win.. and installed transwin rom. But when I try to connect my phone to pc it's only charging and not able to transfer any data.. and it's not connecting to odin also.. when tried to flash another rom I got stuck in cwm recovery mode for almost 5 days..I searched on Google I found that using stock flash file I can come out of cwm.. so I booted into stock mode using "stock flash zip file" via install zip .. . Now I m not able to boot into cwm recovery mode.. please Help me to connect my phone to pc. And to boot into cwm recovery. Thanks in advance.. rom manager also not helping..now I installed stock rom which I have backed up before.. but still not able to connect with my pc...
Please Help me to boot in cwm recovery and to connect with odin.. ..
Click to expand...
Click to collapse
Turn off your phone and then boot to Download Mode (to do that, press Power, Volume Down and Home button at the same time). If you have your phone's drivers installed on your PC then Odin should recognize your phone. Now go to samsung-updates.com and download your phone's firmware. The link I gave is for GT-I8552 - which I'm assuming is your phone's model number. Once it downloads, flash it using Odin.
Looks like MtpApplication.apk is missing on your phone. That's why you probably can't transfer any files. Either this or something might be wrong with your phone's micro USB port or your USB cable.
You can watch some tutorial videos on YouTube for more info. Good luck!
thanks for reply..
thank u very much for reply...
i solved that problem but now m facing one more problem, on my galaxy grand win 8552 i reinstalled TWRP and after reboot my phone not starting only.. totally dead.. no vibration,no light on pressing of any key.. only when i connect it to my laptop it says unkwn device(beeps like something is connected to pc) even phone is in dead condition.... actually i was running on cwm after directly i installed twrp and after finishing i selected reboot and after that nothing happened and phone not starting only.. no charging logo also.. today i just downloaded stock rom.. nw plzz tell me how to install stock rom..is there any way to flash stock rom?????? i cant enter into cwm ..
plz hel...
thanks for reply..
thank u very much for reply...
i solved that problem but now m facing one more problem, on my galaxy grand win 8552 i reinstalled TWRP and after reboot my phone not starting only.. totally dead.. no vibration,no light on pressing of any key.. only when i connect it to my laptop it says unkwn device(beeps like something is connected to pc) even phone is in dead condition.... actually i was running on cwm after directly i installed twrp and after finishing i selected reboot and after that nothing happened and phone not starting only.. no charging logo also.. today i just downloaded stock rom.. nw plzz tell me how to install stock rom..is there any way to flash stock rom?????? i cant enter into cwm ..
plz help...
Sagar Kininge said:
thank u very much for reply...
i solved that problem but now m facing one more problem, on my galaxy grand win 8552 i reinstalled TWRP and after reboot my phone not starting only.. totally dead.. no vibration,no light on pressing of any key.. only when i connect it to my laptop it says unkwn device(beeps like something is connected to pc) even phone is in dead condition.... actually i was running on cwm after directly i installed twrp and after finishing i selected reboot and after that nothing happened and phone not starting only.. no charging logo also.. today i just downloaded stock rom.. nw plzz tell me how to install stock rom..is there any way to flash stock rom?????? i cant enter into cwm ..
plz help...
Click to expand...
Click to collapse
Looks like you bricked your phone. Are you sure that the TWRP you installed is for your phone? Because this usually happens when you install something that was not made for your phone.
Try to do what I said earlier. Boot to Download Mode. And using Odin flash your phone's firmware. If the damage is not severe then by doing this it should fix your phone. If the damage is severe then perhaps your phone is permanently bricked.
can i install rom through sp tool.. i tried it also but it asking scatter file.. i dont have scatter file of galaxy grand win 8552.. if u have then plz give me its link.. thats my last hope to bring my cell to file..
and that TWEP i installed was not for my cell.. i installed it by mistakly..
plz plz help..
I feel you can try connecting your phone again to odin and flashing a custom recovery made for your phone. That's all of your hopes left if it is not bricked. Pray to god.
Sent from my GT-I9300 using XDA Free mobile app
you need a driver from samsung. The connect thru adb command.
cibalo said:
you need a driver from samsung. The connect thru adb command.
Click to expand...
Click to collapse
i fixed that problem with nearest repair shop.. he said my root file were deleted.. he repaired my phone but before doing that all my phone internal memory was 5.10gb now it became 1.5gb, when i asked him,he said that was necessory because some of your storage got damaged due to flashing wrong recovery(done by me).... so i want to know whatever he said is right???? if yes then is there any possibilities to repair my damaged storage part.....
thanks XDA developers to for answering my all questions thanks a lot ..
HEllo, I tied flashing my phone for rooting but since the USB didnt connect as the port is loose, the phone is still in debugging mode
Then I used framaroot from play store and rooted my device .. I used a ROM toolkit and installed a custom boot animation, now my phone is stuck on the bootloop .
I have tried wiping cache partition along with restore to default by going into the recovery mode, but it still doesnt work.
My device is on stock firmware and no custom recovery like CWM or TWRP is installed on it .
Please help .. what should I do next ?
Fumpph said:
HEllo, I tied flashing my phone for rooting but since the USB didnt connect as the port is loose, the phone is still in debugging mode
Then I used framaroot from play store and rooted my device .. I used a ROM toolkit and installed a custom boot animation, now my phone is stuck on the bootloop .
I have tried wiping cache partition along with restore to default by going into the recovery mode, but it still doesnt work.
My device is on stock firmware and no custom recovery like CWM or TWRP is installed on it .
Please help .. what should I do next ?
Click to expand...
Click to collapse
Hi, thank you for using XDA assist.
There is a general forum for android here http://forum.xda-developers.com/android/help where you can get better help and support if you try to ask over there.
Good luck.