Database Info

[SOLVED]Rom Manager Boot Loop after selecting Backup current rom

Hi.. I installed Rom Manager onto my friends p500,it was rooted earlier.. but it did not have a custom recovery ..so i flashed the latest cmw through the rom manager app.
After which i selected to create a back up.. The mobile restarted (to enter the cmw recovery for backup operation).. but soon after the restart the mobile got stuck at the LG Logo.. I waited for about 10mins and it did not respond. Then i removed the battery and then power it on.. but it is stuck at the LG logo.. I am unable to get into custom recovery.. (power+home+volumeup).
Also, Mobile is not detected when connected to pc.
How to resolve this issue?? Please help
(I am able to get into emergency mode)

Double tread
Inviato dal mio LG-P500 con Tapatalk 2

??.. can u reply in english please.

problem solved.
CLOSE THREAD

help
clawsright said:
Hi.. I installed Rom Manager onto my friends p500,it was rooted earlier.. but it did not have a custom recovery ..so i flashed the latest cmw through the rom manager app.
After which i selected to create a back up.. The mobile restarted (to enter the cmw recovery for backup operation).. but soon after the restart the mobile got stuck at the LG Logo.. I waited for about 10mins and it did not respond. Then i removed the battery and then power it on.. but it is stuck at the LG logo.. I am unable to get into custom recovery.. (power+home+volumeup).
Also, Mobile is not detected when connected to pc.
How to resolve this issue?? Please help
(I am able to get into emergency mode)
Click to expand...
Click to collapse
I faced similar issue, and got it resolved by jtag.
now I am afraid to do custom recovery, can u tell me what went wrong and how to avoid.
I am on stock 2.3.3
thanks in advance.

Vipuljain_in said:
I faced similar issue, and got it resolved by jtag.
now I am afraid to do custom recovery, can u tell me what went wrong and how to avoid.
I am on stock 2.3.3
thanks in advance.
Click to expand...
Click to collapse
Even though the the P500 is "supported" by ROM Manager, ROM manager is extremely wonky with that device. ROM Manager is not the only way to install a recovery and IMHO is the worst way to manage that device. ADB, Fastboot, and FlashImageGUI are much safer alternatives. FlashImageGUI requires the 'flash_image' binary to be installed on the device. I've never seen it on a stock ROM for any device but it is usually included with custom ROMs. 'flash_image' can be extracted from /system/bin of any custom ROM and pushed to the device. FlashImageGUI can be downloaded from Play Store. The other two alternatives are a little more cumbersome, but just as effective.
I have written a Windows front-end for the fastboot executable called Android Flash Recovery. Assuming that your device drivers are correctly installed and the device can be booted in to fastboot mode, Android Flash Recovery can make recovery installation much easier. The link for AFR is in my signature.

clawsright said:
problem solved.
CLOSE THREAD
Click to expand...
Click to collapse
Thread closed

[Q] Bricked Galaxy y Duos

Hey,
I have Samsung Galaxy Y Duos and i installed GingerIceJelly V2 on it. But after flashing it got stuck in the Samsung Galaxy y duos logo.
I can not boot into the ROM/recovery/download because it's stuck on the logo. So my question is, how can i save my phone?
I asked the same question in "Bricked your phone?" thread but it seems that no one knew the solution...

LocDog39 said:
Hey,
I have Samsung Galaxy Y Duos and i installed GingerIceJelly V2 on it. But after flashing it got stuck in the Samsung Galaxy y duos logo.
I can not boot into the ROM/recovery/download because it's stuck on the logo. So my question is, how can i save my phone?
I asked the same question in "Bricked your phone?" thread but it seems that no one knew the solution...
Click to expand...
Click to collapse
you can't do anything about it :crying:, just take it to the shop from where you bought it and tell them it's not working and wish they replace your phone and don't tell them that you have flashed a rom.

Okay thanks

Hey
I got that brick working again.. Just had to go to SD, remove the "_old" from "Boot_old.img" and then i could boot into recovery and download after which i used Odin and now everything is ok.

LocDog39 said:
Hey
I got that brick working again.. Just had to go to SD, remove the "_old" from "Boot_old.img" and then i could boot into recovery and download after which i used Odin and now everything is ok.
Click to expand...
Click to collapse
how do you did it coz i have the same problem i flashed gingericejelly and it is stuck in the logo .....how do you use odin??? plzzzzzzz
help coz i want to make it wor again

groundead said:
how do you did it coz i have the same problem i flashed gingericejelly and it is stuck in the logo .....how do you use odin??? plzzzzzzz
help coz i want to make it wor again
Click to expand...
Click to collapse
http://androidlegend.com/update-samsung-galaxy-y-duos-s6102-with-gingerbread-2-3-6-ddld4/ follow this link

groundead said:
how do you did it coz i have the same problem i flashed gingericejelly and it is stuck in the logo .....how do you use odin??? plzzzzzzz
help coz i want to make it wor again
Click to expand...
Click to collapse
Using odin is not complex .. Its simple ..But you have to take attention... Anytng wrong can make your phone a priceless paperweight.
Requirements
1. PC with windows os.
2. Installed samsung usb driver.
3. Odin for your phone.
3. Odin flashable stock firmware.
Steps
1. Get your phone into odin mode by pressing vol down+power+home keys simultaneously. Then a menu will come. Press vol up to get into odin mode..
2.connect your phone to ur pc by usb..
3.unzip odin and run odin.
4.In odin if there is a colour change (yellow or blue) in left top end (it will be written "com:xx" inside colourd box) your device is ready for flashing.
5.ensure that there is no tick on partition.
6.now unzip stock rom. Possible u will have only one file. Click on PDA and select that file. Now press start.
7. Dont do anything .. Wait patiently . Dont plugg out your phone from usb untill "pass" will come on the top left end.
By these steps ..you can work on odin...
Sent from my GT-S6102 using xda app-developers app

rahulsnair said:
Using odin is not complex .. Its simple ..But you have to take attention... Anytng wrong can make your phone a priceless paperweight.
Requirements
1. PC with windows os.
2. Installed samsung usb driver.
3. Odin for your phone.
3. Odin flashable stock firmware.
Steps
1. Get your phone into odin mode by pressing vol down+power+home keys simultaneously. Then a menu will come. Press vol up to get into odin mode..
2.connect your phone to ur pc by usb..
3.unzip odin and run odin.
4.In odin if there is a colour change (yellow or blue) in left top end (it will be written "com:xx" inside colourd box) your device is ready for flashing.
5.ensure that there is no tick on partition.
6.now unzip stock rom. Possible u will have only one file. Click on PDA and select that file. Now press start.
7. Dont do anything .. Wait patiently . Dont plugg out your phone from usb untill "pass" will come on the top left end.
By these steps ..you can work on odin...
Sent from my GT-S6102 using xda app-developers app
Click to expand...
Click to collapse
Tried and works! THANKS MAN!

my galaxy y duos is dead, it was not rebooting and goes only to downloading mode. i try flash with the custom rom but still it doesnt booting .
plzz help me

rahulsnair said:
Using odin is not complex .. Its simple ..But you have to take attention... Anytng wrong can make your phone a priceless paperweight.
Requirements
1. PC with windows os.
2. Installed samsung usb driver.
3. Odin for your phone.
3. Odin flashable stock firmware.
Steps
1. Get your phone into odin mode by pressing vol down+power+home keys simultaneously. Then a menu will come. Press vol up to get into odin mode..
2.connect your phone to ur pc by usb..
3.unzip odin and run odin.
4.In odin if there is a colour change (yellow or blue) in left top end (it will be written "com:xx" inside colourd box) your device is ready for flashing.
5.ensure that there is no tick on partition.
6.now unzip stock rom. Possible u will have only one file. Click on PDA and select that file. Now press start.
7. Dont do anything .. Wait patiently . Dont plugg out your phone from usb untill "pass" will come on the top left end.
By these steps ..you can work on odin...
Sent from my GT-S6102 using xda app-developers app
Click to expand...
Click to collapse
i tried these thing that you say ..but my samsung galaxy y duos is still stuck at logo ...in recovery mode
" --appling Muti-csc --
E : failed to mount /system (invalid argument)
E : failed to mount /system (invalid argument ) " is written ..what can i do ..please tell me ..

my phone is stuck (boot LOGO) , after flasing !
hey ,,
can anyone sort this out for me ..please !
tried flashing new rom Boyzz v2.0(http://forum.xda-developers.com/showthread.php?t=2507406) via CMW recovery.., tried flasinh the same rom twice , will it work if flash my stock rom ???
tried clearing everything on my SD card , formatted n tried flashing it again .
n when i charge after switching off ..a circle comes inside that battery logo instead of that green stuff .
i can boot into recovery mode after i remove the battery and reinsert it again .
w

[Q] Galaxy fit not booting up and unable to connect to pc

I have Samsung Galaxy Fit-S5670 with android 2.3.4.
Few days before i have rooted my device for some days. After that i unrooted it due to some problems occurring in it. The WiFi keep on always, and never switched off. Also unable to tether hotspot.
USB connection also not working with windows 7 PC. It keeps on saying "USB not recognized", also installed drivers, but nothing happened.
Now I tried to install CyanogenMod 10 using recovery mode. It said "Successful" but my device is not starting, samsung screen is coming and next "Android . . . " is coming . nothing further is happening.
Please anybody help me.

mohitum007 said:
I have Samsung Galaxy Fit-S5670 with android 2.3.4.
Few days before i have rooted my device for some days. After that i unrooted it due to some problems occurring in it. The WiFi keep on always, and never switched off. Also unable to tether hotspot.
USB connection also not working with windows 7 PC. It keeps on saying "USB not recognized", also installed drivers, but nothing happened.
Now I tried to install CyanogenMod 10 using recovery mode. It said "Successful" but my device is not starting, samsung screen is coming and next "Android . . . " is coming . nothing further is happening.
Please anybody help me.
Click to expand...
Click to collapse
Did you installed ClockWorkMod Recovery or you used stock recovery to install the ROM?

mohitum007 said:
I have Samsung Galaxy Fit-S5670 with android 2.3.4.
Few days before i have rooted my device for some days. After that i unrooted it due to some problems occurring in it. The WiFi keep on always, and never switched off. Also unable to tether hotspot.
USB connection also not working with windows 7 PC. It keeps on saying "USB not recognized", also installed drivers, but nothing happened.
Now I tried to install CyanogenMod 10 using recovery mode. It said "Successful" but my device is not starting, samsung screen is coming and next "Android . . . " is coming . nothing further is happening.
Please anybody help me.
Click to expand...
Click to collapse
Install latest samsung driver
flash samsung firmware via odin

Abhi04 said:
Install latest samsung driver
flash samsung firmware via odin
Click to expand...
Click to collapse
He said that he installed the drivers.Try to uninstall them and install Kies from Samsung and try to connect with that,but you need to flash the stock firmware via Odin

mohitum007 said:
I have Samsung Galaxy Fit-S5670 with android 2.3.4.
Few days before i have rooted my device for some days. After that i unrooted it due to some problems occurring in it. The WiFi keep on always, and never switched off. Also unable to tether hotspot.
USB connection also not working with windows 7 PC. It keeps on saying "USB not recognized", also installed drivers, but nothing happened.
Now I tried to install CyanogenMod 10 using recovery mode. It said "Successful" but my device is not starting, samsung screen is coming and next "Android . . . " is coming . nothing further is happening.
Please anybody help me.
Click to expand...
Click to collapse
gabyif said:
Did you installed ClockWorkMod Recovery or you used stock recovery to install the ROM?
Click to expand...
Click to collapse
Where to install it ? On device or PC? I am stucked in the device boot unable to start device.

mohitum007 said:
Where to install it ? On device or PC? I am stucked in the device boot unable to start device.
Click to expand...
Click to collapse
CWM install on the device and then try to reflash CM 10.1
Download it from here:http://forum.xda-developers.com/showthread.php?t=1339640

gabyif said:
CWM install on the device and then try to reflash CM 10.1
Download it from here:http://forum.xda-developers.com/showthread.php?t=1339640
Click to expand...
Click to collapse
Can i install it using recovery mode? Because usb not recognized on PC that is why i can't install through Odin Multi Downloader.

mohitum007 said:
Can i install it using recovery mode? Because usb not recognized on PC that is why i can't install through Odin Multi Downloader.
Click to expand...
Click to collapse
No you can't,but you need to go in Download mode(Power+Volume Down+Home button) to install it.
It should recognize your phone

gabyif said:
No you can't,but you need to go in Download mode(Power+Volume Down+Home button) to install it.
It should recognize your phone
Click to expand...
Click to collapse
But it is not recognized in download mode too......:'(

mohitum007 said:
But it is not recognized in download mode too......:'(
Click to expand...
Click to collapse
is it going in download mode ?
if it is and mobile is not recognized then try reinstalling mobile usb drivers
Sent from my GT-S5670 using xda premium

soham jambhekar said:
is it going in download mode ?
if it is and mobile is not recognized then try reinstalling mobile usb drivers
Sent from my GT-S5670 using xda premium
Click to expand...
Click to collapse
Ok i will try that too...and check if it works !!!
Do you have any download link for latest drivers?

www.mediafire.com/?h4waxh8r5twuwuq
this is the link to samsung usb driver installer
Sent from my GT-S5670 using xda premium

not connect kaise
hi
i m using jana rom when i try to connect whit samsung kaise there no responses found..
what to do ??

nirajkrm1 said:
hi
i m using jana rom when i try to connect whit samsung kaise there no responses found..
what to do ??
Click to expand...
Click to collapse
Maybe your baseband version isn't of ur country/region. Also check ur drivers
Sent Via XDA™ Premium

IT seems to me that u tried to instal cm10.1 with stock recovery( isn't it). if u did u probably soft bricked ur device.. if not if u hv installed cwm recovery 5 by tj style using odin multi downloader...then tried to install cm10.1 then wipe data and try installing the rom again....
Second; if u hv stock recovery + soft bricked ur device and u cannot connect to ur computer then probably u hv no choice but to goto local mobile repair center... in your device the charging ic may have been damaged which will they replace for rs.200/- and flashing ur device back to normal will cost u rs.200/- extra....using their circuits..something z-box....
third; if u went to authorised samsung care they will blindly charge u rs.4000/- for changing motherboard and messing up the software...which noboy wants.. or ucan makeup a story and fool them and replace ur motherboard if under warranty...
fourth; try to check with local mobile repairwallah and u can yourself flash stock rom at local internet cafe...and then root then instal cwm5 recovery then install diifferent roms for our device.....
take care..:good: luck

i need a recovery for galaxy fit
hi i have bricked my samsung galaxy fit beaucouse after root with apply from sd card i tried to install a room with my stock recovery (orginal recovery) and now when i switch on it shows only logo of sasmung. my charging ic is not working and doesnt so please help me with a recovery than can be installed from stock recovery please helppppp i know how to use odin beaucouse i have rooted and flashed so much phones but is not working to me helpp meeee pls

bosi255 said:
hi i have bricked my samsung galaxy fit beaucouse after root with apply from sd card i tried to install a room with my stock recovery (orginal recovery) and now when i switch on it shows only logo of sasmung. my charging ic is not working and doesnt so please help me with a recovery than can be installed from stock recovery please helppppp i know how to use odin beaucouse i have rooted and flashed so much phones but is not working to me helpp meeee pls
Click to expand...
Click to collapse
can you go to download mode? ( try power+volumeDown+home keys). if you can then simply flash a stock firmware from samfirmware.com via odin.
if you can't go to download mode then take a look at this conversation:
http://forum.xda-developers.com/showthread.php?t=2413137

ehsan-black said:
can you go to download mode? ( try power+volumeDown+home keys). if you can then simply flash a stock firmware from samfirmware.com via odin.
if you can't go to download mode then take a look at this conversation:
http://forum.xda-developers.com/showthread.php?t=2413137
Click to expand...
Click to collapse
Yes, but here is more precise link:
http://forum.xda-developers.com/showthread.php?t=2413137#4

please help me
ehsan-black said:
can you go to download mode? ( try power+volumeDown+home keys). if you can then simply flash a stock firmware from samfirmware.com via odin.
if you can't go to download mode then take a look at this conversation:
http://forum.xda-developers.com/showthread.php?t=2413137
Click to expand...
Click to collapse
yes i can go to download mode and to recovery mode but i have stock recovery and my charging ic dosent work and cable to so is inposible to connect to pc i want only a custum recovery that can be installed from stock recovery even a temporary recovery to install with apply from sd card beaucouse i havent find one for my galaxy fit.i find one but it was for galaxy young but dosent work please helppppppppp

helppp
hi i have bricked my samsung galaxy fit beaucouse after root with apply from sd card i tried to install a room with my stock recovery (orginal recovery) and now when i switch on it shows only logo of sasmung. my charging ic is not working and doesnt so please help me with a recovery than can be installed from stock recovery please helppppp i know how to use odin beaucouse i have rooted and flashed so much phones but is not working to me helpp meeee pls
i can go to download mode and to recovery mode but i have stock recovery and my charging ic dosent work and cable to so is inposible to connect to pc i want only a custum recovery that can be installed from stock recovery even a temporary recovery to install with apply from sd card beaucouse i havent find one for my galaxy fit.i find one but it was for galaxy young but dosent work please helppppppppp

How to enable usb debugging mode when phone is bricked

Hi! hello every one.......I'm new to XDA .... and may be I'm posting my problem in wrong discussion ...... any how I having a problem with my mt6589 Clone S4......
Yesterday I was using my phone and it's working fine but when I restart my phone I gets stuck on adroid logo..... I tried wiping cache / factory rest....but no luck...
I'm googling my problem for last 14 to 15 hours but I don't find any help full information......
I tried Installing custom rom by going to recovery mode .....but it gets unknown error....
I tried spflash tool ..... but it asks for enabling usb debugging mode but my stucks on android logo..... now basically my question is that how to turn debugging mode on when my phone get stucks on android logo.....
I also can't install cwm recovery because it's also ask for enabling a debugging mode.......

Shahid Niazi said:
Hi! hello every one.......I'm new to XDA .... and may be I'm posting my problem in wrong discussion ...... any how I having a problem with my mt6589 Clone S4......
Yesterday I was using my phone and it's working fine but when I restart my phone I gets stuck on adroid logo..... I tried wiping cache / factory rest....but no luck...
I'm googling my problem for last 14 to 15 hours but I don't find any help full information......
I tried Installing custom rom by going to recovery mode .....but it gets unknown error....
I tried spflash tool ..... but it asks for enabling usb debugging mode but my stucks on android logo..... now basically my question is that how to turn debugging mode on when my phone get stucks on android logo.....
I also can't install cwm recovery because it's also ask for enabling a debugging mode.......
Click to expand...
Click to collapse
So, you flashed a ROM via cwm.
A few lines later you mention that you can't install cwm... is there something I miss????
Whatever;
Can you enter Fastboot/Flash mode manually/via PC and flash a new ROM from there using Flash Tool?
Have you unlocked your bootloader?
Have you tried following these steps?
That's pretty much everything I can think of.
I hope it's just a software brick... :fingers-crossed:

sonyu said:
So, you flashed a ROM via cwm.
A few lines later you mention that you can't install cwm... is there something I miss????
Whatever;
Can you enter Fastboot/Flash mode manually/via PC and flash a new ROM from there using Flash Tool?
Have you unlocked your bootloader?
Have you tried following these steps?
That's pretty much everything I can think of.
I hope it's just a software brick... :fingers-crossed:
Click to expand...
Click to collapse
No I said I can't install a rom via recovery it gets unknown error ....
But Now I have another question how to enter mt5689 in Fastboot/Flash Mode manually via pc .....with flash tool......

plz can anyone tell how to enable usb debugging mode when phone is bricked.....

if you want to install a stock rom via odin, you dont need usb debugging to be on, just boot into odin/download mode (google to see how) and flash a stock rom, then do whatever you need.

Shahid Niazi said:
Hi! hello every one.......I'm new to XDA .... and may be I'm posting my problem in wrong discussion ...... any how I having a problem with my mt6589 Clone S4......
Yesterday I was using my phone and it's working fine but when I restart my phone I gets stuck on adroid logo..... I tried wiping cache / factory rest....but no luck...
I'm googling my problem for last 14 to 15 hours but I don't find any help full information......
I tried Installing custom rom by going to recovery mode .....but it gets unknown error....
I tried spflash tool ..... but it asks for enabling usb debugging mode but my stucks on android logo..... now basically my question is that how to turn debugging mode on when my phone get stucks on android logo.....
I also can't install cwm recovery because it's also ask for enabling a debugging mode.......
Click to expand...
Click to collapse
Now listen to me very carefully! Don't even try to flash a new firmware to your mobile which is not for your mobile and face the same fate as did! Your place is needrom.com. just contact the site administrator for your device model and he will help you... Believe me!

Hi.....thanx for your reply brother.......
I downloaded the rom from needrom.com for my device mtk6589.....which is actually mtk6572
but after installing a rom with spflash tool....... my hand set gets dead....no usb no display no charging nothing.......
I flashed with spflash tool and process completed successfully with no error... but after installation of rom I safely remove usb of my device ... but when I try to turn my phone on then nothing happen.. now my phone is hard bricked.... Now Plz guide me what I should do now....
I heard from someone that I can be fixed with volcano box....
Plz can anyone tell me..

Did you choose correct model and version?
Sent from my Q900 using XDA Premium 4 mobile app

Kobro said:
if you want to install a stock rom via odin, you dont need usb debugging to be on, just boot into odin/download mode (google to see how) and flash a stock rom, then do whatever you need.
Click to expand...
Click to collapse
You just brought a sigh of relief & smile to my face..
Not just that-you helped me restore my phone with less worry..
Thanks a tonne :angel:

software brick
I have a rooted and unlocked bootloader xperia s. What happened is that I was flashing a new software via cwm and its boot img but its stucks on boot img when restarting phone and I haven't enabled usb debugging so I can't install cwn. So anyone can help me???

henno98.hg said:
I have a rooted and unlocked bootloader xperia s. What happened is that I was flashing a new software via cwm and its boot img but its stucks on boot img when restarting phone and I haven't enabled usb debugging so I can't install cwn. So anyone can help me???
Click to expand...
Click to collapse
same problem here ..?? did u get any solution ??

Please Help...
Saraf Vikyath said:
same problem here ..?? did u get any solution ??
Click to expand...
Click to collapse
Nobody? You got a solution already?
I have a brick Xperia SP with UBL and I tried to relock via flashtool and then repair via Pc Companion, but still detects the modifications...

Guys....my question is how to enable usb debugging on a soft bricked device

help me bricked micrmex express 2 plz

my phone too .. I forgot to switch my USB debugging...

Help!!!!!
henno98.hg said:
I have a rooted and unlocked bootloader xperia s. What happened is that I was flashing a new software via cwm and its boot img but its stucks on boot img when restarting phone and I haven't enabled usb debugging so I can't install cwn. So anyone can help me???
Click to expand...
Click to collapse
Help i have the same problem, put a custom boot loader on an asus zenfone 2 ze551ml and I couldnt get my passcode to work so I put it in recovery mode and wipe devit cache and it took longer than it should so I forced phone off and ever since then the phjone turns on but loops. I have tried to manully put the phone fastboot and doing that but didnt work. and even tried to update from ADB and that even didnt work. I have tried everything but no luck. Please help me. or email me too [email protected]

The bootloader of my htc desire s is locked and the phone is also not turning on , my usb debugging modhe was disabled, now i need to unlock the bootloader . help me please

sonyu said:
So, you flashed a ROM via cwm.
A few lines later you mention that you can't install cwm... is there something I miss????
Whatever;
Can you enter Fastboot/Flash mode manually/via PC and flash a new ROM from there using Flash Tool?
Have you unlocked your bootloader?
Have you tried following these steps?
That's pretty much everything I can think of.
I hope it's just a software brick... :fingers-crossed:
Click to expand...
Click to collapse
hello!,i wanna ask some question
so right now my phone is stuck on boot or bootloop,and i actually have the stable rom in my phone but the name is not "update.zip" and i forgot to enable usb debugging,is there anyway to access my internal storage without usb debugging
my phone is xiaomi mi4,thanks!:good:
---------- Post added at 06:59 AM ---------- Previous post was at 06:54 AM ----------
Kobro said:
if you want to install a stock rom via odin, you dont need usb debugging to be on, just boot into odin/download mode (google to see how) and flash a stock rom, then do whatever you need.
Click to expand...
Click to collapse
hello so my phone is currently in bootloop,i have a stable rom in my internal storage but the name is not update.zip so i cant flash the rom,i forgot to enable usb debugging,is there anyway to access the internal storage via pc without usb debugging?,my current phone is mi4 xiaomi
Thanks!

chandrakaii said:
hello so my phone is currently in bootloop,i have a stable rom in my internal storage but the name is not update.zip so i cant flash the rom,i forgot to enable usb debugging,is there anyway to access the internal storage via pc without usb debugging?,my current phone is mi4 xiaomi
Thanks!
Click to expand...
Click to collapse
Stable rom as in stock rom? or a stable custom rom?
in any case. if you have cwm or twrp you should be able to access the file on your computer, or even transfer it to an sd if the phone has it..
if its a custom rom flashable zip though you you might as well just flash it.
if its a stock rom an you cant aces recovery then you have to redownload it to your pc....

Shahid Niazi said:
Hi.....thanx for your reply brother.......
I downloaded the rom from needrom.com for my device mtk6589.....which is actually mtk6572
but after installing a rom with spflash tool....... my hand set gets dead....no usb no display no charging nothing.......
I flashed with spflash tool and process completed successfully with no error... but after installation of rom I safely remove usb of my device ... but when I try to turn my phone on then nothing happen.. now my phone is hard bricked.... Now Plz guide me what I should do now....
I heard from someone that I can be fixed with volcano box....
Plz can anyone tell me..
Click to expand...
Click to collapse
Now you can't unbrick your phone because you overwritten the preloader of your phone. Remember: when flashing with SP flash tool you mustn't flash the preloader. The preloader is the file that makes possible the flashing with SP and now that you have overwritten it or flashed the wrong one, you probably won't be able to recover it. Take it to service center.
Sent by my iPad using Tapatalk

[Q] canvas 2 bricked usb debugging is not enabled cant boot into recovery

hey every one 2 days back i was able to flash lewa os rom on my canvas 2 .. when i found this updater in apps i downloaded the update of that rom i think it is called O.T.A.. i went to recovery mode and flashed it ..i flashed that update with out enabling usb debugging ..
NOW I BRICKED MY PHONE all i am able to see is a boot logo all the time like it restarts and shows that boot logo i am unable to boot into recovery or factory mode.. i have been trying to unbrick it for hours and days as its the only phone i have .. please help me out of this cant install the drivers or my pc wont recognize the phone it ends up unable to install usb .. am really worried i cant buy an other phone please any one help me out of this .... i want to solve it solve it asap as i have no other phone to use please .. I CAN'T ENTER DOWNLOAD OR RECOVERY MODE OR ANY OF IT WHEN I TRY TO ENTER RECOVERY MODE WHAT IT DOSE IS JUST RESTARTS AND SHOWS THE LOGO AGAIN AND AGAIN... PLEASE HELP ME OUT OF THIS

Try flashing Stock JB ROM by Paplu using SPFlashTools.
http://forum.xda-developers.com/showthread.php?t=2167244
I never flashed LeWa OS but don't Update Over the Air (OTA) as it might be downloading the update for that device (as it a ported ROM (I think)) the ROM was actually made for.
And don't worry. All of us had bricked devices at some point of time.
I prefer you use SPFlashTools on a Win 7 PC as drivers are a bit complicated to install on Win 8 as they are not signed. After that, download CWM img and flash it using SPFlashTools (tutorial to flash just recovery is also given or you ask if you are not able to do it) as recovery flashed through Mobile Uncle Tools also doesn't boot after factory resets and a couple of more situations.