Database Info

[Q] Xperia L brick dead

hi,
I've been looking around the forum and couldn't find a solution for my problem
I bought a Xperia L for my child and based on my experienced with my Nexus 4 I wanted to install a custom Rom.
the phone is free sim. I 'm allowed to free bootloacker it.
After enabling USB debbugging ON and installing the drivers with flashtool (vers 9.13 on win 7 64bit) I managed to boot in flash mode and unlock the bootloader via flashtool (thanks to the key provided by Sony) .
the phone rebooted with the Sony logo and those coloured lights.AND USB debbuging OFF !!!!
I've tried to flash a original sony ftf (in put into the firmware C2105_15.0.A.2.17_CE or C2105_15.3.A.1.14_CE file in flashtool) but no luck. it tells me that is preparing the files and then reboot into "device" (usual reboot)
After removing the battery I've rebooted in fastboot and somehow managed to flash the custom Rom (.img) from Phantom (I can see his logo when I turn the phone on). but that's it.
I'm somehow suspecting the USB debbuging OFF creating me issues and the SD card being blank to not help either.
I've installed the PC companion lately but it does not recognized it either...
I'm quite a newby and my goals are 1st to have it working again then to root it in order to install a custom ROM.
Any help or suggestion is welcome

Try removing battery for 2-3 minutes and se if that can get it to boot or at least get to recovery.

Redzo said:
Try removing battery for 2-3 minutes and se if that can get it to boot or at least get to recovery.
Click to expand...
Click to collapse
I'm in recovery mode now.
I'll look in the forum for a modus opererando from that point but again any additional suggestion/help is welcome

ok.
I'm in the recovery mode v5.0.3.5 by TZ (guess is the phanton owner)
My SD card is formated and I've copied the phanton.zip file. tried to install... no luck. also copied the sony factory file and still no luck.
the menu gives me different options but not sure what to do. will still look in the forum but no luck so far....
I have not rooted the device (and do not know what to do), still cannot flash the factory rom with flashtool (as described above) ...
Any help on where to start from the recovery mode?

francoism said:
hi,
I've been looking around the forum and couldn't find a solution for my problem
I bought a Xperia L for my child and based on my experienced with my Nexus 4 I wanted to install a custom Rom.
the phone is free sim. I 'm allowed to free bootloacker it.
After enabling USB debbugging ON and installing the drivers with flashtool (vers 9.13 on win 7 64bit) I managed to boot in flash mode and unlock the bootloader via flashtool (thanks to the key provided by Sony) .
the phone rebooted with the Sony logo and those coloured lights.AND USB debbuging OFF !!!!
I've tried to flash a original sony ftf (in put into the firmware C2105_15.0.A.2.17_CE or C2105_15.3.A.1.14_CE file in flashtool) but no luck. it tells me that is preparing the files and then reboot into "device" (usual reboot)
After removing the battery I've rebooted in fastboot and somehow managed to flash the custom Rom (.img) from Phantom (I can see his logo when I turn the phone on). but that's it.
I'm somehow suspecting the USB debbuging OFF creating me issues and the SD card being blank to not help either.
I've installed the PC companion lately but it does not recognized it either...
I'm quite a newby and my goals are 1st to have it working again then to root it in order to install a custom ROM.
Any help or suggestion is welcome
Click to expand...
Click to collapse
Welcome to XL world!
I think that you are a little bit confused!Relax...
First of all...,ftf is stock rom and .img is kernel.
So,first u have to unlock the bootloader and then u have to flash stock rom again otherwise u'll get into bootloop.Then u have to flash a custom kernel with CWM (which u can find in Development sector or in Original Development sector) and then flash a custom ROM via CWM from Development sector...
Hope I helped...

kazabubu said:
Welcome to XL world!
I think that you are a little bit confused!Relax...
First of all...,ftf is stock rom and .img is kernel.
So,first u have to unlock the bootloader and then u have to flash stock rom again otherwise u'll get into bootloop.Then u have to flash a custom kernel with CWM (which u can find in Development sector or in Original Development sector) and then flash a custom ROM via CWM from Development sector...
Hope I helped...
Click to expand...
Click to collapse
thanks Kazabubu, I understand the steps you described and :
1) I have successfully unlock the bootloader
2) TRIED to flash the stock rom (ftf) (using flashtool, in flash mode ) but the phone was staying in "Preparing files for flashing" and then disconnecting
3) I think I managed to flash a custom kernel ( phanton) in fastboot mode
4) reboot in recovery mode
5) tried unsuccessfully to install a ROM (stock or custom) under recovery mode.
NOW... extremely strangely I left my phone connected to my PC and went to buy some stuffs... When I came back flashtool had flashed the stock rom... and it's working again.... do not ask me how... I have no idea.
I''ll leave it like that and will "only" try to root it as it is.
I'll close the thread and again thanks for you help guys!

Just flash a custom kernel first then boot into CWM and then flash a SuperSU.zip from the recovery.. It will directly root your phone..
Here is the link for the Zip file..http://download.chainfire.eu/204
Sent from my LT26ii using xda app-developers app

can u help me ?
varunpilankar said:
Just flash a custom kernel first then boot into CWM and then flash a SuperSU.zip from the recovery.. It will directly root your phone..
Here is the link for the Zip file..http://download.chainfire.eu/204
Sent from my LT26ii using xda app-developers app
Click to expand...
Click to collapse
I tried to root via VROOT , next step i installed http://forum.xda-developers.com/showthread.php?t=2598697
dexteroid.
now my phone wont start, it only shows black screen....can you help me

Is it showing you red light when you keep on charge?
Sent from my LT26ii using xda app-developers app

okay chill!
Open flashtoot Dont connected your phone
click on the thunder logo..then flashmode the choose the file you want to flash..it will prepare the file..
After that it will prompt you to connect your phone
press vol.down and connect your phone!
Hope it helps~

francoism said:
hi,
I've been looking around the forum and couldn't find a solution for my problem
I bought a Xperia L for my child and based on my experienced with my Nexus 4 I wanted to install a custom Rom.
the phone is free sim. I 'm allowed to free bootloacker it.
After enabling USB debbugging ON and installing the drivers with flashtool (vers 9.13 on win 7 64bit) I managed to boot in flash mode and unlock the bootloader via flashtool (thanks to the key provided by Sony) .
the phone rebooted with the Sony logo and those coloured lights.AND USB debbuging OFF !!!!
I've tried to flash a original sony ftf (in put into the firmware C2105_15.0.A.2.17_CE or C2105_15.3.A.1.14_CE file in flashtool) but no luck. it tells me that is preparing the files and then reboot into "device" (usual reboot)
After removing the battery I've rebooted in fastboot and somehow managed to flash the custom Rom (.img) from Phantom (I can see his logo when I turn the phone on). but that's it.
I'm somehow suspecting the USB debbuging OFF creating me issues and the SD card being blank to not help either.
I've installed the PC companion lately but it does not recognized it either...
I'm quite a newby and my goals are 1st to have it working again then to root it in order to install a custom ROM.
Any help or suggestion is welcome
Click to expand...
Click to collapse
its very easy my friend just download cm11 google for xperia l transfer it to ext sd card then go to recovery mod factory reset everything wipe cache and delvik too then install cm11 zip

How to enable usb debugging mode when phone is bricked

Hi! hello every one.......I'm new to XDA .... and may be I'm posting my problem in wrong discussion ...... any how I having a problem with my mt6589 Clone S4......
Yesterday I was using my phone and it's working fine but when I restart my phone I gets stuck on adroid logo..... I tried wiping cache / factory rest....but no luck...
I'm googling my problem for last 14 to 15 hours but I don't find any help full information......
I tried Installing custom rom by going to recovery mode .....but it gets unknown error....
I tried spflash tool ..... but it asks for enabling usb debugging mode but my stucks on android logo..... now basically my question is that how to turn debugging mode on when my phone get stucks on android logo.....
I also can't install cwm recovery because it's also ask for enabling a debugging mode.......

Shahid Niazi said:
Hi! hello every one.......I'm new to XDA .... and may be I'm posting my problem in wrong discussion ...... any how I having a problem with my mt6589 Clone S4......
Yesterday I was using my phone and it's working fine but when I restart my phone I gets stuck on adroid logo..... I tried wiping cache / factory rest....but no luck...
I'm googling my problem for last 14 to 15 hours but I don't find any help full information......
I tried Installing custom rom by going to recovery mode .....but it gets unknown error....
I tried spflash tool ..... but it asks for enabling usb debugging mode but my stucks on android logo..... now basically my question is that how to turn debugging mode on when my phone get stucks on android logo.....
I also can't install cwm recovery because it's also ask for enabling a debugging mode.......
Click to expand...
Click to collapse
So, you flashed a ROM via cwm.
A few lines later you mention that you can't install cwm... is there something I miss????
Whatever;
Can you enter Fastboot/Flash mode manually/via PC and flash a new ROM from there using Flash Tool?
Have you unlocked your bootloader?
Have you tried following these steps?
That's pretty much everything I can think of.
I hope it's just a software brick... :fingers-crossed:

sonyu said:
So, you flashed a ROM via cwm.
A few lines later you mention that you can't install cwm... is there something I miss????
Whatever;
Can you enter Fastboot/Flash mode manually/via PC and flash a new ROM from there using Flash Tool?
Have you unlocked your bootloader?
Have you tried following these steps?
That's pretty much everything I can think of.
I hope it's just a software brick... :fingers-crossed:
Click to expand...
Click to collapse
No I said I can't install a rom via recovery it gets unknown error ....
But Now I have another question how to enter mt5689 in Fastboot/Flash Mode manually via pc .....with flash tool......

plz can anyone tell how to enable usb debugging mode when phone is bricked.....

if you want to install a stock rom via odin, you dont need usb debugging to be on, just boot into odin/download mode (google to see how) and flash a stock rom, then do whatever you need.

Shahid Niazi said:
Hi! hello every one.......I'm new to XDA .... and may be I'm posting my problem in wrong discussion ...... any how I having a problem with my mt6589 Clone S4......
Yesterday I was using my phone and it's working fine but when I restart my phone I gets stuck on adroid logo..... I tried wiping cache / factory rest....but no luck...
I'm googling my problem for last 14 to 15 hours but I don't find any help full information......
I tried Installing custom rom by going to recovery mode .....but it gets unknown error....
I tried spflash tool ..... but it asks for enabling usb debugging mode but my stucks on android logo..... now basically my question is that how to turn debugging mode on when my phone get stucks on android logo.....
I also can't install cwm recovery because it's also ask for enabling a debugging mode.......
Click to expand...
Click to collapse
Now listen to me very carefully! Don't even try to flash a new firmware to your mobile which is not for your mobile and face the same fate as did! Your place is needrom.com. just contact the site administrator for your device model and he will help you... Believe me!

Hi.....thanx for your reply brother.......
I downloaded the rom from needrom.com for my device mtk6589.....which is actually mtk6572
but after installing a rom with spflash tool....... my hand set gets dead....no usb no display no charging nothing.......
I flashed with spflash tool and process completed successfully with no error... but after installation of rom I safely remove usb of my device ... but when I try to turn my phone on then nothing happen.. now my phone is hard bricked.... Now Plz guide me what I should do now....
I heard from someone that I can be fixed with volcano box....
Plz can anyone tell me..

Did you choose correct model and version?
Sent from my Q900 using XDA Premium 4 mobile app

Kobro said:
if you want to install a stock rom via odin, you dont need usb debugging to be on, just boot into odin/download mode (google to see how) and flash a stock rom, then do whatever you need.
Click to expand...
Click to collapse
You just brought a sigh of relief & smile to my face..
Not just that-you helped me restore my phone with less worry..
Thanks a tonne :angel:

software brick
I have a rooted and unlocked bootloader xperia s. What happened is that I was flashing a new software via cwm and its boot img but its stucks on boot img when restarting phone and I haven't enabled usb debugging so I can't install cwn. So anyone can help me???

henno98.hg said:
I have a rooted and unlocked bootloader xperia s. What happened is that I was flashing a new software via cwm and its boot img but its stucks on boot img when restarting phone and I haven't enabled usb debugging so I can't install cwn. So anyone can help me???
Click to expand...
Click to collapse
same problem here ..?? did u get any solution ??

Please Help...
Saraf Vikyath said:
same problem here ..?? did u get any solution ??
Click to expand...
Click to collapse
Nobody? You got a solution already?
I have a brick Xperia SP with UBL and I tried to relock via flashtool and then repair via Pc Companion, but still detects the modifications...

Guys....my question is how to enable usb debugging on a soft bricked device

help me bricked micrmex express 2 plz

my phone too .. I forgot to switch my USB debugging...

Help!!!!!
henno98.hg said:
I have a rooted and unlocked bootloader xperia s. What happened is that I was flashing a new software via cwm and its boot img but its stucks on boot img when restarting phone and I haven't enabled usb debugging so I can't install cwn. So anyone can help me???
Click to expand...
Click to collapse
Help i have the same problem, put a custom boot loader on an asus zenfone 2 ze551ml and I couldnt get my passcode to work so I put it in recovery mode and wipe devit cache and it took longer than it should so I forced phone off and ever since then the phjone turns on but loops. I have tried to manully put the phone fastboot and doing that but didnt work. and even tried to update from ADB and that even didnt work. I have tried everything but no luck. Please help me. or email me too [email protected]

The bootloader of my htc desire s is locked and the phone is also not turning on , my usb debugging modhe was disabled, now i need to unlock the bootloader . help me please

sonyu said:
So, you flashed a ROM via cwm.
A few lines later you mention that you can't install cwm... is there something I miss????
Whatever;
Can you enter Fastboot/Flash mode manually/via PC and flash a new ROM from there using Flash Tool?
Have you unlocked your bootloader?
Have you tried following these steps?
That's pretty much everything I can think of.
I hope it's just a software brick... :fingers-crossed:
Click to expand...
Click to collapse
hello!,i wanna ask some question
so right now my phone is stuck on boot or bootloop,and i actually have the stable rom in my phone but the name is not "update.zip" and i forgot to enable usb debugging,is there anyway to access my internal storage without usb debugging
my phone is xiaomi mi4,thanks!:good:
---------- Post added at 06:59 AM ---------- Previous post was at 06:54 AM ----------
Kobro said:
if you want to install a stock rom via odin, you dont need usb debugging to be on, just boot into odin/download mode (google to see how) and flash a stock rom, then do whatever you need.
Click to expand...
Click to collapse
hello so my phone is currently in bootloop,i have a stable rom in my internal storage but the name is not update.zip so i cant flash the rom,i forgot to enable usb debugging,is there anyway to access the internal storage via pc without usb debugging?,my current phone is mi4 xiaomi
Thanks!

chandrakaii said:
hello so my phone is currently in bootloop,i have a stable rom in my internal storage but the name is not update.zip so i cant flash the rom,i forgot to enable usb debugging,is there anyway to access the internal storage via pc without usb debugging?,my current phone is mi4 xiaomi
Thanks!
Click to expand...
Click to collapse
Stable rom as in stock rom? or a stable custom rom?
in any case. if you have cwm or twrp you should be able to access the file on your computer, or even transfer it to an sd if the phone has it..
if its a custom rom flashable zip though you you might as well just flash it.
if its a stock rom an you cant aces recovery then you have to redownload it to your pc....

Shahid Niazi said:
Hi.....thanx for your reply brother.......
I downloaded the rom from needrom.com for my device mtk6589.....which is actually mtk6572
but after installing a rom with spflash tool....... my hand set gets dead....no usb no display no charging nothing.......
I flashed with spflash tool and process completed successfully with no error... but after installation of rom I safely remove usb of my device ... but when I try to turn my phone on then nothing happen.. now my phone is hard bricked.... Now Plz guide me what I should do now....
I heard from someone that I can be fixed with volcano box....
Plz can anyone tell me..
Click to expand...
Click to collapse
Now you can't unbrick your phone because you overwritten the preloader of your phone. Remember: when flashing with SP flash tool you mustn't flash the preloader. The preloader is the file that makes possible the flashing with SP and now that you have overwritten it or flashed the wrong one, you probably won't be able to recover it. Take it to service center.
Sent by my iPad using Tapatalk

samsung galaxy grand win 8552 not connecting to pc.

I rooted my galaxy grand win.. and installed transwin rom. But when I try to connect my phone to pc it's only charging and not able to transfer any data.. and it's not connecting to odin also.. when tried to flash another rom I got stuck in cwm recovery mode for almost 5 days..I searched on Google I found that using stock flash file I can come out of cwm.. so I booted into stock mode using "stock flash zip file" via install zip .. . Now I m not able to boot into cwm recovery mode.. please Help me to connect my phone to pc. And to boot into cwm recovery. Thanks in advance.. rom manager also not helping..now I installed stock rom which I have backed up before.. but still not able to connect with my pc...
Please Help me to boot in cwm recovery and to connect with odin.. ..

Sagar Kininge said:
I rooted my galaxy grand win.. and installed transwin rom. But when I try to connect my phone to pc it's only charging and not able to transfer any data.. and it's not connecting to odin also.. when tried to flash another rom I got stuck in cwm recovery mode for almost 5 days..I searched on Google I found that using stock flash file I can come out of cwm.. so I booted into stock mode using "stock flash zip file" via install zip .. . Now I m not able to boot into cwm recovery mode.. please Help me to connect my phone to pc. And to boot into cwm recovery. Thanks in advance.. rom manager also not helping..now I installed stock rom which I have backed up before.. but still not able to connect with my pc...
Please Help me to boot in cwm recovery and to connect with odin.. ..
Click to expand...
Click to collapse
Turn off your phone and then boot to Download Mode (to do that, press Power, Volume Down and Home button at the same time). If you have your phone's drivers installed on your PC then Odin should recognize your phone. Now go to samsung-updates.com and download your phone's firmware. The link I gave is for GT-I8552 - which I'm assuming is your phone's model number. Once it downloads, flash it using Odin.
Looks like MtpApplication.apk is missing on your phone. That's why you probably can't transfer any files. Either this or something might be wrong with your phone's micro USB port or your USB cable.
You can watch some tutorial videos on YouTube for more info. Good luck!

thanks for reply..
thank u very much for reply...
i solved that problem but now m facing one more problem, on my galaxy grand win 8552 i reinstalled TWRP and after reboot my phone not starting only.. totally dead.. no vibration,no light on pressing of any key.. only when i connect it to my laptop it says unkwn device(beeps like something is connected to pc) even phone is in dead condition.... actually i was running on cwm after directly i installed twrp and after finishing i selected reboot and after that nothing happened and phone not starting only.. no charging logo also.. today i just downloaded stock rom.. nw plzz tell me how to install stock rom..is there any way to flash stock rom?????? i cant enter into cwm ..
plz hel...

thanks for reply..
thank u very much for reply...
i solved that problem but now m facing one more problem, on my galaxy grand win 8552 i reinstalled TWRP and after reboot my phone not starting only.. totally dead.. no vibration,no light on pressing of any key.. only when i connect it to my laptop it says unkwn device(beeps like something is connected to pc) even phone is in dead condition.... actually i was running on cwm after directly i installed twrp and after finishing i selected reboot and after that nothing happened and phone not starting only.. no charging logo also.. today i just downloaded stock rom.. nw plzz tell me how to install stock rom..is there any way to flash stock rom?????? i cant enter into cwm ..
plz help...

Sagar Kininge said:
thank u very much for reply...
i solved that problem but now m facing one more problem, on my galaxy grand win 8552 i reinstalled TWRP and after reboot my phone not starting only.. totally dead.. no vibration,no light on pressing of any key.. only when i connect it to my laptop it says unkwn device(beeps like something is connected to pc) even phone is in dead condition.... actually i was running on cwm after directly i installed twrp and after finishing i selected reboot and after that nothing happened and phone not starting only.. no charging logo also.. today i just downloaded stock rom.. nw plzz tell me how to install stock rom..is there any way to flash stock rom?????? i cant enter into cwm ..
plz help...
Click to expand...
Click to collapse
Looks like you bricked your phone. Are you sure that the TWRP you installed is for your phone? Because this usually happens when you install something that was not made for your phone.
Try to do what I said earlier. Boot to Download Mode. And using Odin flash your phone's firmware. If the damage is not severe then by doing this it should fix your phone. If the damage is severe then perhaps your phone is permanently bricked.

can i install rom through sp tool.. i tried it also but it asking scatter file.. i dont have scatter file of galaxy grand win 8552.. if u have then plz give me its link.. thats my last hope to bring my cell to file..
and that TWEP i installed was not for my cell.. i installed it by mistakly..
plz plz help..

I feel you can try connecting your phone again to odin and flashing a custom recovery made for your phone. That's all of your hopes left if it is not bricked. Pray to god.
Sent from my GT-I9300 using XDA Free mobile app

you need a driver from samsung. The connect thru adb command.

cibalo said:
you need a driver from samsung. The connect thru adb command.
Click to expand...
Click to collapse
i fixed that problem with nearest repair shop.. he said my root file were deleted.. he repaired my phone but before doing that all my phone internal memory was 5.10gb now it became 1.5gb, when i asked him,he said that was necessory because some of your storage got damaged due to flashing wrong recovery(done by me).... so i want to know whatever he said is right???? if yes then is there any possibilities to repair my damaged storage part.....
thanks XDA developers to for answering my all questions thanks a lot ..

I can't get my custom recovery screen

I can't access to my custom recovery screen .... I am using micromax A-89 ninja ,,. When i m trying the right combinatins to enter the recovery screen (i.e. power button + vol. Up button ) but i m not able to get into it .,. I used it many times before... And after rooting my device also used the recovery. But i tried to install a custom and i was unsuccessfully in installing any other custom recovery tool. I tried using boot manager to install the custom rom (s5 for A89) but there i was unabe to get into my c.r. screen ., it stucks on logo and automatically reboots my phone again.
Plzzzzzzzz help me .
Is this a soft brick or anything else.... I m able to use my phone perfectly but cant enter the recovery tool.
Help me.

segrecurs said:
I can't access to my custom recovery screen .... I am using micromax A-89 ninja ,,. When i m trying the right combinatins to enter the recovery screen (i.e. power button + vol. Up button ) but i m not able to get into it .,. I used it many times before... And after rooting my device also used the recovery. But i tried to install a custom and i was unsuccessfully in installing any other custom recovery tool. I tried using boot manager to install the custom rom (s5 for A89) but there i was unabe to get into my c.r. screen ., it stucks on logo and automatically reboots my phone again.
Plzzzzzzzz help me .
Is this a soft brick or anything else.... I m able to use my phone perfectly but cant enter the recovery tool.
Help me.
Click to expand...
Click to collapse
I'm a little bit confused on what you've posted but I will try to help. First I need a little bit more detail as did you Install a custom ROM but you were not succesfull and since then you have not been able to get into recovery or did you try to install a custom recovery and were unsuccessful?
If it is the latter then you will need to succesfully flash a recovery (Stock or Custom) in order to enter this section of the device, if it is the first then I would recommend attempting to reflash the devices stock firmware and starting from the beginning as it appears for both of these potential scenarios that the custom recovery is corrupted or is getting stuck when loading a particular section to work.

I didn't understood. Please guide me for my next step. Weather i should go for firmware or to install a cwm.

i tried to install custom recovery on my device

segrecurs said:
i tried to install custom recovery on my device
Click to expand...
Click to collapse
Are you able to boot normally into android OS..or is it just powering off automatically or is it happening when you try to go to recovery
If you can boot normally into android its not a softbrick but you might get one
Follow this thread http://forum.xda-developers.com/showthread.php?p=38110405#post38110405 if you want to install CLOCK WORK MOD RECOVERY using a computer if your phone doesn't boot...? No worries
DONT FORGET TO THANK THE HARDWORKERS

i m sorry to say but my phone just got hard bricked......now it stuck on the boot logo.....
help me
plzzzzzzzzz

NEEED help plzz..
i got my device into bootloop. i am using micromax a 89. i got stuck in boot loop and i cant enter in my stock recovery. is there any other way to get out of this. plz tell me

[Completed] [HELP] TWRP Flash soft-bricked my phone

Hello, I have a GT-S7560m (Galaxy Trend or Ace II)
Just tried to install the custom recovery too much times, I tried with TWRP official app and didn't worked, tried with ADB, but fastboot won't detect my phone on download mode, and finally tried with TWRP Manager App (here the brick), the APP said I already instaled a custom recovery (but I know not, this is my first time at rom flashing), and then the app asked me to reboot the phone, after reboot, the phone won't boot anymore!
Some specs are there the phone don't show up anything on the screen (like logo or information), don't vibrate, don't boot on recovery or download mode, BUT, any PC recognize it as Serial USB device (COM3, COM5, or COM6), but adb don't find anything!
I don't know whatever happened to my phone, I didn't tried to install custom rom, I was just taking a look at the custom recovery, that I don't installed too
And yeah, my phone was rooted, and I downloaded TWRP from official site, my device is supported, I found out twrp kyleve 3.0.0.0
What to do? It's not a Hard-Brick, I know it :crying:

VitorMac10 said:
Hello, I have a GT-S7560m (Galaxy Trend or Ace II)
Just tried to install the custom recovery too much times, I tried with TWRP official app and didn't worked, tried with ADB, but fastboot won't detect my phone on download mode, and finally tried with TWRP Manager App (here the brick), the APP said I already instaled a custom recovery (but I know not, this is my first time at rom flashing), and then the app asked me to reboot the phone, after reboot, the phone won't boot anymore!
Some specs are there the phone don't show up anything on the screen (like logo or information), don't vibrate, don't boot on recovery or download mode, BUT, any PC recognize it as Serial USB device (COM3, COM5, or COM6), but adb don't find anything!
I don't know whatever happened to my phone, I didn't tried to install custom rom, I was just taking a look at the custom recovery, that I don't installed too
And yeah, my phone was rooted, and I downloaded TWRP from official site, my device is supported, I found out twrp kyleve 3.0.0.0
What to do? It's not a Hard-Brick, I know it :crying:
Click to expand...
Click to collapse
Hello and welcome to xda-assist,
Please get further help on general help section...
http://forum.xda-developers.com/android/help
Good luck