Hello, I have a GT-S7560m (Galaxy Trend or Ace II)
Just tried to install the custom recovery too much times, I tried with TWRP official app and didn't worked, tried with ADB, but fastboot won't detect my phone on download mode, and finally tried with TWRP Manager App (here the brick), the APP said I already instaled a custom recovery (but I know not, this is my first time at rom flashing), and then the app asked me to reboot the phone, after reboot, the phone won't boot anymore!
Some specs are there the phone don't show up anything on the screen (like logo or information), don't vibrate, don't boot on recovery or download mode, BUT, any PC recognize it as Serial USB device (COM3, COM5, or COM6), but adb don't find anything!
I don't know whatever happened to my phone, I didn't tried to install custom rom, I was just taking a look at the custom recovery, that I don't installed too
And yeah, my phone was rooted, and I downloaded TWRP from official site, my device is supported, I found out twrp kyleve 3.0.0.0
What to do? It's not a Hard-Brick, I know it :crying:
VitorMac10 said:
Hello, I have a GT-S7560m (Galaxy Trend or Ace II)
Just tried to install the custom recovery too much times, I tried with TWRP official app and didn't worked, tried with ADB, but fastboot won't detect my phone on download mode, and finally tried with TWRP Manager App (here the brick), the APP said I already instaled a custom recovery (but I know not, this is my first time at rom flashing), and then the app asked me to reboot the phone, after reboot, the phone won't boot anymore!
Some specs are there the phone don't show up anything on the screen (like logo or information), don't vibrate, don't boot on recovery or download mode, BUT, any PC recognize it as Serial USB device (COM3, COM5, or COM6), but adb don't find anything!
I don't know whatever happened to my phone, I didn't tried to install custom rom, I was just taking a look at the custom recovery, that I don't installed too
And yeah, my phone was rooted, and I downloaded TWRP from official site, my device is supported, I found out twrp kyleve 3.0.0.0
What to do? It's not a Hard-Brick, I know it :crying:
Click to expand...
Click to collapse
Hello and welcome to xda-assist,
Please get further help on general help section...
http://forum.xda-developers.com/android/help
Good luck
Related
Hi.. I installed Rom Manager onto my friends p500,it was rooted earlier.. but it did not have a custom recovery ..so i flashed the latest cmw through the rom manager app.
After which i selected to create a back up.. The mobile restarted (to enter the cmw recovery for backup operation).. but soon after the restart the mobile got stuck at the LG Logo.. I waited for about 10mins and it did not respond. Then i removed the battery and then power it on.. but it is stuck at the LG logo.. I am unable to get into custom recovery.. (power+home+volumeup).
Also, Mobile is not detected when connected to pc.
How to resolve this issue?? Please help
(I am able to get into emergency mode)
Double tread
Inviato dal mio LG-P500 con Tapatalk 2
??.. can u reply in english please.
problem solved.
CLOSE THREAD
help
clawsright said:
Hi.. I installed Rom Manager onto my friends p500,it was rooted earlier.. but it did not have a custom recovery ..so i flashed the latest cmw through the rom manager app.
After which i selected to create a back up.. The mobile restarted (to enter the cmw recovery for backup operation).. but soon after the restart the mobile got stuck at the LG Logo.. I waited for about 10mins and it did not respond. Then i removed the battery and then power it on.. but it is stuck at the LG logo.. I am unable to get into custom recovery.. (power+home+volumeup).
Also, Mobile is not detected when connected to pc.
How to resolve this issue?? Please help
(I am able to get into emergency mode)
Click to expand...
Click to collapse
I faced similar issue, and got it resolved by jtag.
now I am afraid to do custom recovery, can u tell me what went wrong and how to avoid.
I am on stock 2.3.3
thanks in advance.
Vipuljain_in said:
I faced similar issue, and got it resolved by jtag.
now I am afraid to do custom recovery, can u tell me what went wrong and how to avoid.
I am on stock 2.3.3
thanks in advance.
Click to expand...
Click to collapse
Even though the the P500 is "supported" by ROM Manager, ROM manager is extremely wonky with that device. ROM Manager is not the only way to install a recovery and IMHO is the worst way to manage that device. ADB, Fastboot, and FlashImageGUI are much safer alternatives. FlashImageGUI requires the 'flash_image' binary to be installed on the device. I've never seen it on a stock ROM for any device but it is usually included with custom ROMs. 'flash_image' can be extracted from /system/bin of any custom ROM and pushed to the device. FlashImageGUI can be downloaded from Play Store. The other two alternatives are a little more cumbersome, but just as effective.
I have written a Windows front-end for the fastboot executable called Android Flash Recovery. Assuming that your device drivers are correctly installed and the device can be booted in to fastboot mode, Android Flash Recovery can make recovery installation much easier. The link for AFR is in my signature.
clawsright said:
problem solved.
CLOSE THREAD
Click to expand...
Click to collapse
Thread closed
Im trying to flash my phone into a new custom ROM cause my current on is slow and keeps crashing my phone also want to update to a different ROM. Problem is I cant reboot into recovery or boot loader or anything. Boot recovery just gives me a pink screen. Recovery just gets stuck at boot logo (it use to work but its all of a sudden decided it doesn't want to work) same thing happens when I try to factory reset my phone also the fast boot method doesnt seem to work either cause I cant get Fastboot to load on my pc. Already tried flashing my ROM and Recovery via Flashify and other apps flash your phone but just got stuck on boot logo. Tried doing a factory reset again got stuck at boot logo. Tried installing the custom ROM via Rom Installer. Still stuck at boot logo. I did several searches and there doesn't seem to be any way to resolve this issue without a recovery or other boot method im hoping someone here can help me. Also my phone wont show up on my pc so I cant access my files and im unable to install Droid explorer cause it doesn't detect my sdk folder which is odd cause it says all the drivers are installed and tools like HiSuite detects my device but the device wont show up in my computer.
Phone Model: Huawei Ascend Y300
Current ROM: Cyanogen Mod 11 (nightly version)
CM11 Version: 11-20150327-NIGHTLY-u8833
Android Version: 4.4.4
Root Access: Yes
USB Debugging Activated: Yes
Current Recovery: TWRP
PC Version: Windows 7 64-bit Home Premium (also have android studio installed on my computer)
Mobile Network: Spark 3G
If you need any further information just ask
Hi
Thanks for writing to us at XDA Assist. Take a look at this thread:
[Guide] Huawei Ascend Y300 Unlock & Root
Thread closed, thanks.
I bricked my phone when installing custom Rom. after installing the CM mod, I tried to install the TWRP recovery, it asked to reboot phone but after it shut down it haven't ever turned on again. Now I cant enter recovery mod since the factory recovery is missing and the new one didn't install completely. when I do a normal boot my phone automatically tries to enter the recovery mode, but then shows "could not do a normal boot; odin mode..........udc start. and is stuck on "downloading....do not turn off target..." any help?
Hi, thank you for using XDA Assist. You're going to have to flash the stock firmware with Odin and return your device to stock. Start here, http://forum.xda-developers.com/gal...08-2013-odin-3-09-odin-1-85-versions-t2189539. And if you have further questions see your device's specific forum here, http://forum.xda-developers.com/galaxy-s5-mini
Thread closed.
HEllo, I tied flashing my phone for rooting but since the USB didnt connect as the port is loose, the phone is still in debugging mode
Then I used framaroot from play store and rooted my device .. I used a ROM toolkit and installed a custom boot animation, now my phone is stuck on the bootloop .
I have tried wiping cache partition along with restore to default by going into the recovery mode, but it still doesnt work.
My device is on stock firmware and no custom recovery like CWM or TWRP is installed on it .
Please help .. what should I do next ?
Fumpph said:
HEllo, I tied flashing my phone for rooting but since the USB didnt connect as the port is loose, the phone is still in debugging mode
Then I used framaroot from play store and rooted my device .. I used a ROM toolkit and installed a custom boot animation, now my phone is stuck on the bootloop .
I have tried wiping cache partition along with restore to default by going into the recovery mode, but it still doesnt work.
My device is on stock firmware and no custom recovery like CWM or TWRP is installed on it .
Please help .. what should I do next ?
Click to expand...
Click to collapse
Hi, thank you for using XDA assist.
There is a general forum for android here http://forum.xda-developers.com/android/help where you can get better help and support if you try to ask over there.
Good luck.
Good Evening,
I own a Samsung Grand Neo Plus (GT-I9060i) and I was running a dotOS v1.2, rooted and bootloader unlocked. I recently downloaded an app called Rashr from Play Store to flash a TWRP recovery because i couldn't flash the stock rom in my CWM recovery, after flashing the TWRP img file the phone rebooted and nothing more happened, I tried to go into recovery mode but nothing happen, even doesn't boot into the System, and when i try to flash the stocke frimware and the TWRP recovery with odin the windows says that the USB not recenized even i am allready have all drivers installed and updated and in bootloader mode .. i have another I9060i it works with no problems with Odin and Windows
Now I don't have recovery to flash a Rom and the Windows USB Problem and no System
I just want to fix the USB Problem or just a idea to install any recovery to flash any Rom to get the phone to life again
If anyone can help me i will be very happy,
Thank You
georgemshaty said:
Good Evening,
I own a Samsung Grand Neo Plus (GT-I9060i) and I was running a dotOS v1.2, rooted and bootloader unlocked. I recently downloaded an app called Rashr from Play Store to flash a TWRP recovery because i couldn't flash the stock rom in my CWM recovery, after flashing the TWRP img file the phone rebooted and nothing more happened, I tried to go into recovery mode but nothing happen, even doesn't boot into the System, and when i try to flash the stocke frimware and the TWRP recovery with odin the windows says that the USB not recenized even i am allready have all drivers installed and updated and in bootloader mode .. i have another I9060i it works with no problems with Odin and Windows
Now I don't have recovery to flash a Rom and the Windows USB Problem and no System
I just want to fix the USB Problem or just a idea to install any recovery to flash any Rom to get the phone to life again
If anyone can help me i will be very happy,
Thank You
Click to expand...
Click to collapse
Samsung has download mode, not bootloader mode(kinda the same but not exactly because download mode is not fastboot compatible but devices with bootloader mode are fastboot compatible).
As for the issues you're having, try this thread for troubleshooting a failed Odin flash.
https://forum.xda-developers.com/galaxy-s2/general/guide-t2345831
Sent from my LGL84VL using Tapatalk