Hi! hello every one.......I'm new to XDA .... and may be I'm posting my problem in wrong discussion ...... any how I having a problem with my mt6589 Clone S4......
Yesterday I was using my phone and it's working fine but when I restart my phone I gets stuck on adroid logo..... I tried wiping cache / factory rest....but no luck...
I'm googling my problem for last 14 to 15 hours but I don't find any help full information......
I tried Installing custom rom by going to recovery mode .....but it gets unknown error....
I tried spflash tool ..... but it asks for enabling usb debugging mode but my stucks on android logo..... now basically my question is that how to turn debugging mode on when my phone get stucks on android logo.....
I also can't install cwm recovery because it's also ask for enabling a debugging mode.......
Shahid Niazi said:
Hi! hello every one.......I'm new to XDA .... and may be I'm posting my problem in wrong discussion ...... any how I having a problem with my mt6589 Clone S4......
Yesterday I was using my phone and it's working fine but when I restart my phone I gets stuck on adroid logo..... I tried wiping cache / factory rest....but no luck...
I'm googling my problem for last 14 to 15 hours but I don't find any help full information......
I tried Installing custom rom by going to recovery mode .....but it gets unknown error....
I tried spflash tool ..... but it asks for enabling usb debugging mode but my stucks on android logo..... now basically my question is that how to turn debugging mode on when my phone get stucks on android logo.....
I also can't install cwm recovery because it's also ask for enabling a debugging mode.......
Click to expand...
Click to collapse
So, you flashed a ROM via cwm.
A few lines later you mention that you can't install cwm... is there something I miss????
Whatever;
Can you enter Fastboot/Flash mode manually/via PC and flash a new ROM from there using Flash Tool?
Have you unlocked your bootloader?
Have you tried following these steps?
That's pretty much everything I can think of.
I hope it's just a software brick... :fingers-crossed:
sonyu said:
So, you flashed a ROM via cwm.
A few lines later you mention that you can't install cwm... is there something I miss????
Whatever;
Can you enter Fastboot/Flash mode manually/via PC and flash a new ROM from there using Flash Tool?
Have you unlocked your bootloader?
Have you tried following these steps?
That's pretty much everything I can think of.
I hope it's just a software brick... :fingers-crossed:
Click to expand...
Click to collapse
No I said I can't install a rom via recovery it gets unknown error ....
But Now I have another question how to enter mt5689 in Fastboot/Flash Mode manually via pc .....with flash tool......
plz can anyone tell how to enable usb debugging mode when phone is bricked.....
if you want to install a stock rom via odin, you dont need usb debugging to be on, just boot into odin/download mode (google to see how) and flash a stock rom, then do whatever you need.
Shahid Niazi said:
Hi! hello every one.......I'm new to XDA .... and may be I'm posting my problem in wrong discussion ...... any how I having a problem with my mt6589 Clone S4......
Yesterday I was using my phone and it's working fine but when I restart my phone I gets stuck on adroid logo..... I tried wiping cache / factory rest....but no luck...
I'm googling my problem for last 14 to 15 hours but I don't find any help full information......
I tried Installing custom rom by going to recovery mode .....but it gets unknown error....
I tried spflash tool ..... but it asks for enabling usb debugging mode but my stucks on android logo..... now basically my question is that how to turn debugging mode on when my phone get stucks on android logo.....
I also can't install cwm recovery because it's also ask for enabling a debugging mode.......
Click to expand...
Click to collapse
Now listen to me very carefully! Don't even try to flash a new firmware to your mobile which is not for your mobile and face the same fate as did! Your place is needrom.com. just contact the site administrator for your device model and he will help you... Believe me!
Hi.....thanx for your reply brother.......
I downloaded the rom from needrom.com for my device mtk6589.....which is actually mtk6572
but after installing a rom with spflash tool....... my hand set gets dead....no usb no display no charging nothing.......
I flashed with spflash tool and process completed successfully with no error... but after installation of rom I safely remove usb of my device ... but when I try to turn my phone on then nothing happen.. now my phone is hard bricked.... Now Plz guide me what I should do now....
I heard from someone that I can be fixed with volcano box....
Plz can anyone tell me..
Did you choose correct model and version?
Sent from my Q900 using XDA Premium 4 mobile app
Kobro said:
if you want to install a stock rom via odin, you dont need usb debugging to be on, just boot into odin/download mode (google to see how) and flash a stock rom, then do whatever you need.
Click to expand...
Click to collapse
You just brought a sigh of relief & smile to my face..
Not just that-you helped me restore my phone with less worry..
Thanks a tonne :angel:
software brick
I have a rooted and unlocked bootloader xperia s. What happened is that I was flashing a new software via cwm and its boot img but its stucks on boot img when restarting phone and I haven't enabled usb debugging so I can't install cwn. So anyone can help me???
henno98.hg said:
I have a rooted and unlocked bootloader xperia s. What happened is that I was flashing a new software via cwm and its boot img but its stucks on boot img when restarting phone and I haven't enabled usb debugging so I can't install cwn. So anyone can help me???
Click to expand...
Click to collapse
same problem here ..?? did u get any solution ??
Please Help...
Saraf Vikyath said:
same problem here ..?? did u get any solution ??
Click to expand...
Click to collapse
Nobody? You got a solution already?
I have a brick Xperia SP with UBL and I tried to relock via flashtool and then repair via Pc Companion, but still detects the modifications...
Guys....my question is how to enable usb debugging on a soft bricked device
help me bricked micrmex express 2 plz
my phone too .. I forgot to switch my USB debugging...
Help!!!!!
henno98.hg said:
I have a rooted and unlocked bootloader xperia s. What happened is that I was flashing a new software via cwm and its boot img but its stucks on boot img when restarting phone and I haven't enabled usb debugging so I can't install cwn. So anyone can help me???
Click to expand...
Click to collapse
Help i have the same problem, put a custom boot loader on an asus zenfone 2 ze551ml and I couldnt get my passcode to work so I put it in recovery mode and wipe devit cache and it took longer than it should so I forced phone off and ever since then the phjone turns on but loops. I have tried to manully put the phone fastboot and doing that but didnt work. and even tried to update from ADB and that even didnt work. I have tried everything but no luck. Please help me. or email me too [email protected]
The bootloader of my htc desire s is locked and the phone is also not turning on , my usb debugging modhe was disabled, now i need to unlock the bootloader . help me please
sonyu said:
So, you flashed a ROM via cwm.
A few lines later you mention that you can't install cwm... is there something I miss????
Whatever;
Can you enter Fastboot/Flash mode manually/via PC and flash a new ROM from there using Flash Tool?
Have you unlocked your bootloader?
Have you tried following these steps?
That's pretty much everything I can think of.
I hope it's just a software brick... :fingers-crossed:
Click to expand...
Click to collapse
hello!,i wanna ask some question
so right now my phone is stuck on boot or bootloop,and i actually have the stable rom in my phone but the name is not "update.zip" and i forgot to enable usb debugging,is there anyway to access my internal storage without usb debugging
my phone is xiaomi mi4,thanks!:good:
---------- Post added at 06:59 AM ---------- Previous post was at 06:54 AM ----------
Kobro said:
if you want to install a stock rom via odin, you dont need usb debugging to be on, just boot into odin/download mode (google to see how) and flash a stock rom, then do whatever you need.
Click to expand...
Click to collapse
hello so my phone is currently in bootloop,i have a stable rom in my internal storage but the name is not update.zip so i cant flash the rom,i forgot to enable usb debugging,is there anyway to access the internal storage via pc without usb debugging?,my current phone is mi4 xiaomi
Thanks!
chandrakaii said:
hello so my phone is currently in bootloop,i have a stable rom in my internal storage but the name is not update.zip so i cant flash the rom,i forgot to enable usb debugging,is there anyway to access the internal storage via pc without usb debugging?,my current phone is mi4 xiaomi
Thanks!
Click to expand...
Click to collapse
Stable rom as in stock rom? or a stable custom rom?
in any case. if you have cwm or twrp you should be able to access the file on your computer, or even transfer it to an sd if the phone has it..
if its a custom rom flashable zip though you you might as well just flash it.
if its a stock rom an you cant aces recovery then you have to redownload it to your pc....
Shahid Niazi said:
Hi.....thanx for your reply brother.......
I downloaded the rom from needrom.com for my device mtk6589.....which is actually mtk6572
but after installing a rom with spflash tool....... my hand set gets dead....no usb no display no charging nothing.......
I flashed with spflash tool and process completed successfully with no error... but after installation of rom I safely remove usb of my device ... but when I try to turn my phone on then nothing happen.. now my phone is hard bricked.... Now Plz guide me what I should do now....
I heard from someone that I can be fixed with volcano box....
Plz can anyone tell me..
Click to expand...
Click to collapse
Now you can't unbrick your phone because you overwritten the preloader of your phone. Remember: when flashing with SP flash tool you mustn't flash the preloader. The preloader is the file that makes possible the flashing with SP and now that you have overwritten it or flashed the wrong one, you probably won't be able to recover it. Take it to service center.
Sent by my iPad using Tapatalk
hey every one 2 days back i was able to flash lewa os rom on my canvas 2 .. when i found this updater in apps i downloaded the update of that rom i think it is called O.T.A.. i went to recovery mode and flashed it ..i flashed that update with out enabling usb debugging ..
NOW I BRICKED MY PHONE all i am able to see is a boot logo all the time like it restarts and shows that boot logo i am unable to boot into recovery or factory mode.. i have been trying to unbrick it for hours and days as its the only phone i have .. please help me out of this cant install the drivers or my pc wont recognize the phone it ends up unable to install usb .. am really worried i cant buy an other phone please any one help me out of this .... i want to solve it solve it asap as i have no other phone to use please .. I CAN'T ENTER DOWNLOAD OR RECOVERY MODE OR ANY OF IT WHEN I TRY TO ENTER RECOVERY MODE WHAT IT DOSE IS JUST RESTARTS AND SHOWS THE LOGO AGAIN AND AGAIN... PLEASE HELP ME OUT OF THIS
Try flashing Stock JB ROM by Paplu using SPFlashTools.
http://forum.xda-developers.com/showthread.php?t=2167244
I never flashed LeWa OS but don't Update Over the Air (OTA) as it might be downloading the update for that device (as it a ported ROM (I think)) the ROM was actually made for.
And don't worry. All of us had bricked devices at some point of time.
I prefer you use SPFlashTools on a Win 7 PC as drivers are a bit complicated to install on Win 8 as they are not signed. After that, download CWM img and flash it using SPFlashTools (tutorial to flash just recovery is also given or you ask if you are not able to do it) as recovery flashed through Mobile Uncle Tools also doesn't boot after factory resets and a couple of more situations.
i rooted my device and it was working properly. Then i flashed it with cwm recovery mode then i flashed it with lolicop version and it even worked Nicely.. But the superuser was not working. So i again rooted it with framaroot. It succeeded and i re booted my device. But when i opened superuser again it asked me to reboot again.. But after that it got stuck in the recovery mode.. Please help me
I m in real trouble...
Please
Urgent
How did you flash cwm? With a computer or with an app on your phone like recovery tools?
First in cwm try a factory reset, if that doesn't work, factory reset and then re flash the ROM you were running.
Also please post your galaxy core specs including which android version your on, thank you.
i just tried to update my recovery to twrp with easy magic twrp installer on my htc desire 526g+(mt6592)
link: gizbeat.com/5786/how-to-make-create-twrp-mt6592-mt6582-mt6572-mt6589-mt6595/#comment-39398
it said installation successful rebooting now and since then all it does is bootloops
i can go into bootloader but if i select either recovery mode or normal boot it goes and does bootloops again
and in fast boot my computer recognize thats it connected but dosnt reconize adb in cmd
i just want to do a factory reset an that's it but without recovery mode i dont know how to do it can any one help me
do any one have the original rom for the 526g+?or the sock recovery mode
pleasssssse any help would be really appreciable
menachg said:
i just tried to update my recovery to twrp with easy magic twrp installer on my htc desire 526g+(mt6592)
link: gizbeat.com/5786/how-to-make-create-twrp-mt6592-mt6582-mt6572-mt6589-mt6595/#comment-39398
it said installation successful rebooting now and since then all it does is bootloops
i can go into bootloader but if i select either recovery mode or normal boot it goes and does bootloops again
and in fast boot my computer recognize thats it connected but dosnt reconize adb in cmd
i just want to do a factory reset an that's it but without recovery mode i dont know how to do it can any one help me
do any one have the original rom for the 526g+?or the sock recovery mode
pleasssssse any help would be really appreciable
Click to expand...
Click to collapse
Hi,
Thank you for using XDA assist
It looks there is no dedicated forum for your device. However there is a general forum for android here http://forum.xda-developers.com/android/help where you can try to ask to get the expert's help
Good luck.
Hello, I have a GT-S7560m (Galaxy Trend or Ace II)
Just tried to install the custom recovery too much times, I tried with TWRP official app and didn't worked, tried with ADB, but fastboot won't detect my phone on download mode, and finally tried with TWRP Manager App (here the brick), the APP said I already instaled a custom recovery (but I know not, this is my first time at rom flashing), and then the app asked me to reboot the phone, after reboot, the phone won't boot anymore!
Some specs are there the phone don't show up anything on the screen (like logo or information), don't vibrate, don't boot on recovery or download mode, BUT, any PC recognize it as Serial USB device (COM3, COM5, or COM6), but adb don't find anything!
I don't know whatever happened to my phone, I didn't tried to install custom rom, I was just taking a look at the custom recovery, that I don't installed too
And yeah, my phone was rooted, and I downloaded TWRP from official site, my device is supported, I found out twrp kyleve 3.0.0.0
What to do? It's not a Hard-Brick, I know it :crying:
VitorMac10 said:
Hello, I have a GT-S7560m (Galaxy Trend or Ace II)
Just tried to install the custom recovery too much times, I tried with TWRP official app and didn't worked, tried with ADB, but fastboot won't detect my phone on download mode, and finally tried with TWRP Manager App (here the brick), the APP said I already instaled a custom recovery (but I know not, this is my first time at rom flashing), and then the app asked me to reboot the phone, after reboot, the phone won't boot anymore!
Some specs are there the phone don't show up anything on the screen (like logo or information), don't vibrate, don't boot on recovery or download mode, BUT, any PC recognize it as Serial USB device (COM3, COM5, or COM6), but adb don't find anything!
I don't know whatever happened to my phone, I didn't tried to install custom rom, I was just taking a look at the custom recovery, that I don't installed too
And yeah, my phone was rooted, and I downloaded TWRP from official site, my device is supported, I found out twrp kyleve 3.0.0.0
What to do? It's not a Hard-Brick, I know it :crying:
Click to expand...
Click to collapse
Hello and welcome to xda-assist,
Please get further help on general help section...
http://forum.xda-developers.com/android/help
Good luck