hey every one 2 days back i was able to flash lewa os rom on my canvas 2 .. when i found this updater in apps i downloaded the update of that rom i think it is called O.T.A.. i went to recovery mode and flashed it ..i flashed that update with out enabling usb debugging ..
NOW I BRICKED MY PHONE all i am able to see is a boot logo all the time like it restarts and shows that boot logo i am unable to boot into recovery or factory mode.. i have been trying to unbrick it for hours and days as its the only phone i have .. please help me out of this cant install the drivers or my pc wont recognize the phone it ends up unable to install usb .. am really worried i cant buy an other phone please any one help me out of this .... i want to solve it solve it asap as i have no other phone to use please .. I CAN'T ENTER DOWNLOAD OR RECOVERY MODE OR ANY OF IT WHEN I TRY TO ENTER RECOVERY MODE WHAT IT DOSE IS JUST RESTARTS AND SHOWS THE LOGO AGAIN AND AGAIN... PLEASE HELP ME OUT OF THIS
Try flashing Stock JB ROM by Paplu using SPFlashTools.
http://forum.xda-developers.com/showthread.php?t=2167244
I never flashed LeWa OS but don't Update Over the Air (OTA) as it might be downloading the update for that device (as it a ported ROM (I think)) the ROM was actually made for.
And don't worry. All of us had bricked devices at some point of time.
I prefer you use SPFlashTools on a Win 7 PC as drivers are a bit complicated to install on Win 8 as they are not signed. After that, download CWM img and flash it using SPFlashTools (tutorial to flash just recovery is also given or you ask if you are not able to do it) as recovery flashed through Mobile Uncle Tools also doesn't boot after factory resets and a couple of more situations.
Bricked XOLO Q3000 (Once Again)
Bricked my XOLO Q3000 Kitkat while trying to install PhilZ custom recovery.Now its stuck in boot loop(the XOLO logo keeps appearing again and again).I backed up the stock boot.img and recovery.img through FlashifyI even tried installing stock recovery through mtk droid tools but to no avail.Now what to do??
SOLVED
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE.So I've become quite of an engineer ..
Haldar_dhruv said:
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE.So I've become quite of an engineer ..
Click to expand...
Click to collapse
How u flashed the philz recovery??
There is no way u can brick ur deivce while flashing recovery if u follow the methods given here.
U can always press the thanks button if ur using any stuff of any dev.
Formatting emmc means formatting ur internal storage too.
ur all data on internal storage will be gone
Bricked Again
This time it happened when I was editing the build.prop .I saved the file as I had the original build.prop file backed up.Then I thought I should restore it.I copied the build.prop file from my sdcard and overwrited it to /system .But now its again struck in boot loop.I just need access to the phone storage so that I can try to replace it again.What should I do???
help help help... avi
i flashed twrp 2.8.0.0, then tried installing hny15 8/1/2015 rom but installation failed , then flashed philz recovery through twrp then reboot but stucked on xolo boot logo. trying to go to recovery but xolo logo flashes again n again, what to do now brother. HELP..! PLZZZZZzzzz,..
:crying:
Xolo Q3000 stuck in Boot Loop
Haldar_dhruv said:
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE.So I've become quite of an engineer ..
Click to expand...
Click to collapse
Hi,
I tried to flash the twrp custom recovery via a flash tool on my device post which the device got stuck in boot loop. Now when i am trying to flash the recovery or even trying to install stock rom nothing is working the device does get recognized on any pc or laptop in spite of the drivers being there... i am new to all this would really appreciate your help in fixing this.
Su007 said:
Hi,
I tried to flash the twrp custom recovery via a flash tool on my device post which the device got stuck in boot loop. Now when i am trying to flash the recovery or even trying to install stock rom nothing is working the device does get recognized on any pc or laptop in spite of the drivers being there... i am new to all this would really appreciate your help in fixing this.
Click to expand...
Click to collapse
Solution : Visit http://forum.xda-developers.com/show...74&postcount=1
"This method is useful for warranty purposes and also for UNBRICKING !!!!
U can revert back to normal rom from any possible bad situations like soft brick or hard brick.
Also u can enjoy ur stock rom.
U will need sp flash tools and flash files."
SEE THE CATEGORY : INSTALL STOCK FIRMWARE
download the flash files and follow the guide
Ask avi3230 as I am not that much experienced,He helped me
GauravBak said:
i flashed twrp 2.8.0.0, then tried installing hny15 8/1/2015 rom but installation failed , then flashed philz recovery through twrp then reboot but stucked on xolo boot logo. trying to go to recovery but xolo logo flashes again n again, what to do now brother. HELP..! PLZZZZZzzzz,..
:crying:
Click to expand...
Click to collapse
Solution : Visit http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1
"This method is useful for warranty purposes and also for UNBRICKING !!!!
U can revert back to normal rom from any possible bad situations like soft brick or hard brick.
Also u can enjoy ur stock rom.
U will need sp flash tools and flash files."
SEE THE CATEGORY : INSTALL STOCK FIRMWARE
download the flash files and follow the guide
Ask avi3230 as I am not that much experienced,He helped me :cyclops:
The Most Important Page
Before u do anything with your beloved XOLO Q3000 visit and bookmark this link http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1
If problem solved hit the Thanks button
Haldar_dhruv said:
This time it happened when I was editing the build.prop .I saved the file as I had the original build.prop file backed up.Then I thought I should restore it.I copied the build.prop file from my sdcard and overwrited it to /system .But now its again struck in boot loop.I just need access to the phone storage so that I can try to replace it again.What should I do???
Click to expand...
Click to collapse
try too flash again the original roms via stock recovery..
Haldar_dhruv said:
Bricked my XOLO Q3000 Kitkat while trying to install PhilZ custom recovery.Now its stuck in boot loop(the XOLO logo keeps appearing again and again).I backed up the stock boot.img and recovery.img through FlashifyI even tried installing stock recovery through mtk droid tools but to no avail.Now what to do??
Click to expand...
Click to collapse
Try flashing the ctr recovery! use flashify and flash either the zip file or the img file! This should work
worked for me
MIUI ROM Woooooo
Yes I have already solved this post Thanks anyway
EAGERLY WAITING FOR MIUI rom to be uplaoded today by avi
KEEP CHECKING HERE http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1
rashr..
Haldar_dhruv said:
Bricked my XOLO Q3000 Kitkat while trying to install PhilZ custom recovery.Now its stuck in boot loop(the XOLO logo keeps appearing again and again).I backed up the stock boot.img and recovery.img through FlashifyI even tried installing stock recovery through mtk droid tools but to no avail.Now what to do??
Click to expand...
Click to collapse
try to flash recovery.img via rashr... It shoul work for u.
mujaid714 said:
try to flash recovery.img via rashr... It shoul work for u.
Click to expand...
Click to collapse
Thanks But the Problem was already solved, would make some sense for others maybe.
Thanks For Helping
Haldar_dhruv said:
Before u do anything with your beloved XOLO Q3000 visit and bookmark this link http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1
If problem solved hit the Thanks button
Click to expand...
Click to collapse
Hi Haldar,
Can you please guide me through step by step please, I am very new to all these. To try anything, My xolo q3000 is stuck in bootloop and is not getting detected on any PC or even turning on to get it flashed to any software.
Any help would be greatly appreciated.
Thanks
alfamine
alfamine said:
Hi Haldar,
Can you please guide me through step by step please, I am very new to all these. To try anything, My xolo q3000 is stuck in bootloop and is not getting detected on any PC or even turning on to get it flashed to any software.
Any help would be greatly appreciated.
Thanks
alfamine
Click to expand...
Click to collapse
Tell me in detail whatever happened. Try the below procedure also.
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE
Haldar_dhruv said:
Tell me in detail whatever happened. Try the below procedure also.
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE
Click to expand...
Click to collapse
I tried to flash to a recovery.img through flashify application and now bricked my phone which is in bootloop now and is neither booting to use other softwares or methods neither is it getting detected on any PCs to flash custom recovery.
I have tried to Volume down + power button and also Volume up + power button to get into recovery menus but none to success,
Just stuck at boot logo of xolo.
Thanks
alfamine
Go to this link here
http://forum.xda-developers.com/q3000/development/xolo-q3000-one-ultimate-thread-t3038259
Then click on unbricking, install adb drivers in pc etc and continue as it says.
Hi guys,
I have a Moto G2 currently and I have rooted it through KingRoot which was successfully done. After that, I had download the APK of Flash Image GUI and I tried to flash a custom recovery. After that, I tried to boot into recovery but it was showing:
hab check failed for recovery
failed to validate recovery image
Boot up failed
However, I can boot my phone up but it takes way way more time than it usually takes. My Bootloader is locked. I seriously dont know what's happened to my phone. Some plz help me. The phone shows the Motorola logo for few minutes and then turns off for a second and then boots up again and then after 5 minutes it boots up properly. I dont know how to unlock bootloader and all as I have just come from a Samsung S3 which was very easy to root and flash a recovery(thru Odin). I wanted to erase the user data in my phone. I tried thru recovery it didnt happen, i tried thru settings and it just tried to boot to recovery but couldnt and showed the above command. Plz help guys as I want a stock recovery or any other recovery so I can flash a custom ROM. I saw many forums and couldnt find a single problem like this so I came here .
Thanks a lot guys I just had to unlock the boot loader and return to stock 5.0.2 via a windowstool. I had bricked my device trying to install CM12.1 Nightly and the windows tool helped me so much u have know idea.
I tried Installing MOD SAMYPOP rom in my gt-i8262....and when I reboot my phone....
my phone stucked in bootloop........ also no recovery mode is starting.....................!!!
i tried reinstalling cwm and TWRP recovery via odin in order to open recovery mode and install my backup through it...but it is also not working unable to get recovery mode..
....so finally tried to flash the stock firmware through ODIN..... but it iz still in boot loop.......
Damn man in a big trouble.....
if anyone having any idea.... then plz tell guys....
thanx in advance
Wat up fellas....I finally found a solution. .....
And btw a big thanx to u people DEVELOPERS for this kinda response...!!!
If anyone wants then I can post the solution tooo
Sent from my GT-I8262 using XDA Premium 4 mobile app
Q. Have you got in cwm recovery loop i.e. when you reboot your phone it goes in recovery mode?
ANS. No probs. Just remove your battery and open download mode manually by pressing Power button+Home+volume down key. If you do like this only then download mode will support your odin otherwise it won’t support. After this just flash your cwm recovery again.
Q. Stuck on boot animation?
ANS. Just download adb (android debug bridge) minimum requirements. Sideload your rom . It may seem to you that you got stuck there but don’t panic, wait at least 5 minutes. After that remove your battery and press (Power+Home+volume up) upto it shows samsung screen and then release. Then just install your rom from recovery mode. ENJOY…………………….
I have galaxy core duos GT-I8262. Could you please guide me to flash custom recovery, Rooting and install a custom ROM.
Sent from my Sparkle V using Tapatalk
Try these.--
http://www.droidthunder.com/install-android-5-0-lollipop-on-samsung-galaxy-core-i8262/
http://forum.xda-developers.com/showthread.php?t=2644565
If you wanna try kitkat then try cyanogenmod 12 made custom rom.
vivekjib said:
Q. Have you got in cwm recovery loop i.e. when you reboot your phone it goes in recovery mode?
ANS. No probs. Just remove your battery and open download mode manually by pressing Power button+Home+volume down key. If you do like this only then download mode will support your odin otherwise it won’t support. After this just flash your cwm recovery again.
Q. Stuck on boot animation?
ANS. Just download adb (android debug bridge) minimum requirements. Sideload your rom . It may seem to you that you got stuck there but don’t panic, wait at least 5 minutes. After that remove your battery and press (Power+Home+volume up) upto it shows samsung screen and then release. Then just install your rom from recovery mode. ENJOY…………………….
Click to expand...
Click to collapse
That 2nd one made my day....
Thanks man
Hi guys i just want to ask help ..
The thing is my android phone cherry mobile omega spectrum got bootloop( or soft bricked) and i cant access recovery then i flash a new room(advan s5) which is quite similar to my stock rom which i flash thru DFU cuz i cant access recovery.......and it works..
The problem now is i cant still access recovery after i flash the new rom ..whenever i try to hold power button+ arrow down... Its only show the s5 logo and it will keep rebooting... Its like i have bootloop on my recovery ... So please comment any suggestion that you can think thanks!
-already reflash new recovery several times and still not working..