Plz anyone help me
I was downgrading my unite 2 from kitkat to jellybean
it was successfully flashed
But after flash there was no response by device I.e. No boot logo no recovery no charging notification but device is detected by my pc
But whenever m going to flash it it's showing draim failed 4032
Plz help frndz I trye. Many versions of sp flash tool many firmware but the error is same plz help me out
Make sure that you are trying to flash are exact stock firmware.
If it is so, try formatting your phone. (Make sure that don’t format the boot-loader before flashing it.)
Try changing the usb cable, or try changing the usb port in which you are connecting.
If all of these methods fails, try this method:
1) download the "SP Flash Tool V5.1352.01"
2) select the scatter file from your original rom
3) go to "options" in the flash tool>options>connections>battery>select (W/O)battery
4) now go back and click on download and after that connect ur phone WITHOUT BATTERY to pc via usb cable
and then just wait for few min. till the flashing over......
and after flashing disconnect phone from pc and then just start the phone..........
Try and report your points if you succeed. It might help others in future
hit the thanks button if i helped :good:
Related
I have got a chinese clone phone with MTK6573V which was bricked by flashing a wrong firmware image via CWM-based custom recovery BUT after flashing the wrong firmware my phone cant even boot not even in recovery mode.Nor i am able to write Recovery via SP Flash Tool v2.1134.00 it always give me error :
BROM ERROR:S_DL_GET_DRAM_SETTING_FAIL(5054)
[EMI]obtain DRAM Failed!
[HINT]lease check your load matches to your target which is to be download.
http://img838.imageshack.us/img838/3817/mtkerror.jpg
My phone is only able to make MTK PRELOADER PORT nothing else, no back light, no recovery mode
And now my phone also dont make MT65x3 USB VCOM Port so i am only able to connect phone with SP TOOLS when DA DOWNLOAD ALL is enabled otherwise it wont connect
mtk6573
hello there
i read your post and you has exacly the same problem im having with my phone.
did you manage to solve the problem?
if you did can you please help me out.
Thx
I have the same problem.
It`s bricked, nothing works and i cannot even upload the preloader or anything
EDIT : Upgraded to latest SP Flash tool and now i get a new error 5007
I have the same problem in MTK6575. Any solution?
B.R.
check the following link may be that will be helpful for you guys
http://www.labandroid.com/china/2013/02/flash-cwm-recovery-to-mtk-phones-without-sp-flash-tool/
hi fnds i had a bricked mmx a110 phone. for that [email protected] has given a wonderful idea that is
1.First of all download and extract the following file to any specified folder........
A.STOCK JELLYBEAN.RAR
B.SP FLASH TOOLS
*************THE PASSWORD OF SP FLASH TOOLS IS "[email protected]" (without quotation marks)****************
2.now remove ur fone's battery and keep it aside.
3.go to the folder where u have extracted sp flash tools. Run it as administration.
4.click on scatter loading option and browse for the folder where u have extracted jb(or ics rom).
5.now click on firmware upgrade option if flashing jb or if flashing ics click download option.
6.connect ur fone to pc.
Let the process complete. After it completes reinsert the battery and switch on ur fone.
And wid this u should have successfully unbricked ur fone..
Note:U will observe dat ur fone is unrooted again and cwm or twrp recovery has been replaced by stock recovery.
Click to expand...
Click to collapse
i've followed it exactly & i got my phone back with stock rom.
now the only problem is even though i've checked usb debugging mode on in my phone & connecting it to pc to root my phone by using ""one click method/ root with bin4ry/ unroot pro"" it is showing pls connect ur device with usb debugging on even though i have put it in on mode.
but i'm getting like s9081 autoplay window when i connect my phone to pc.
so pls help me
all the thing i want is only root. of there is any way of rooting my phone with out pc it will be very good,
otherwise pls help me to solve above problem.
thank u a lot in advance
My Lenovo A3500 is no turning on after flashing the stock rom via sp flashtools, it didn't flash completely, it failed before downloading. I accidentally closed the error box (which tells me where the log file is).
So before this happened, I successfully flashed the stock rom for my tablet, then I decided to flash cwm recovery (I found a compatible version), Then I tried flashing the cwm recovery via spflashtool but it tells me that "PMT changed for the rom. It must be downloaded". So I decided to reinstall the stock rom with the CWM recovery. So I selected the scatter file for the stock rom and I just changed the path of the recovery to the CWM recovery, when I clicked download and connected my powered off device, It showed an error that it cant be completed (I forgot what it is, it told me there's a log file) Now my tablet doesnt start after pressing the power button, cant access anything on the tablet but when I connect it to my computer, my computer plays the sound that it found a device so that means my tablet is detected. I tried adb devices but it shows nothing. I tried flashing the stock rom again via sp flashtool but when I click download and plug in the phone the download is not starting meaning it cant detect my tablet.
So for short:
my lenovo a3500 tablet doesnt turn on after flashing stock rom, it is detected by pc (plays sound) but cant be detected by adb. It cant be detected by sp flashtool.
please help, youre my last hope pls m8s
----------------------------------------------------------------
NEVERMIND, I JUST INSTALLED THE MTK PRELOADER VCOM DRIVER AND TRIED FLASHING IT AGAIN VIA SP FLASHTOOLS THEN IT WORKED!!! PLEASE CLOSE THE THREAD. THANKS
My unite 2 is not charging,not switching not responding .I tried to flash it with sp flash tool but it stop after da download with error 4001.In flash tool it is not showing chip info.
No panic needed!
Don't worry mate! I also have gone through the same situation a lot of times!
Search for stock Firmware of Unite 2(Google)
Flash it using the SP Flash tool (But Don't Download this time search for an option Firmware Upgrade and then click download!)
After that you will get back your device!
If you like this post please hit Like Button that would be a great help!
Hey my phone is also bricked... Please tell me in details... can't do anything with sp flash tool. It also not detects my phone.
kng_santosh069 said:
Hey my phone is also bricked... Please tell me in details... can't do anything with sp flash tool. It also not detects my phone.
Click to expand...
Click to collapse
press vol- and connect with usb cable. wait preloader to be installed, start SPflash tool -> load scatter file MT6582(search on internet or ask me) click on download. follow instructions...
Voila! you will have phone with stock firmware..
I was trying to unroot my device by re flashing firmware using SP Tools. But after flashing Device is sucked in a reboot loop. Only vibrate. I tried reflashing. This time when I try to flash it gives me an error "not enough storage" . Stupid me I have done fomat + download option in SP tools. Fomat is done correctly But download was incomplete because again it gives me the same error. This time I think I killed device myself. Now PC does not detect device as a VCom preloader. it detect as mtk usb com. D u have any solutions for re flash preloder.