I have got a chinese clone phone with MTK6573V which was bricked by flashing a wrong firmware image via CWM-based custom recovery BUT after flashing the wrong firmware my phone cant even boot not even in recovery mode.Nor i am able to write Recovery via SP Flash Tool v2.1134.00 it always give me error :
BROM ERROR:S_DL_GET_DRAM_SETTING_FAIL(5054)
[EMI]obtain DRAM Failed!
[HINT]lease check your load matches to your target which is to be download.
http://img838.imageshack.us/img838/3817/mtkerror.jpg
My phone is only able to make MTK PRELOADER PORT nothing else, no back light, no recovery mode
And now my phone also dont make MT65x3 USB VCOM Port so i am only able to connect phone with SP TOOLS when DA DOWNLOAD ALL is enabled otherwise it wont connect
mtk6573
hello there
i read your post and you has exacly the same problem im having with my phone.
did you manage to solve the problem?
if you did can you please help me out.
Thx
I have the same problem.
It`s bricked, nothing works and i cannot even upload the preloader or anything
EDIT : Upgraded to latest SP Flash tool and now i get a new error 5007
I have the same problem in MTK6575. Any solution?
B.R.
check the following link may be that will be helpful for you guys
http://www.labandroid.com/china/2013/02/flash-cwm-recovery-to-mtk-phones-without-sp-flash-tool/
Related
so i tried flashing gravitymod's CMW to my W8 via SP flash tool. at first it did not work...after playing around i finally got CMW to load up and was able to flash the gravity mod rom...it turned out to be a cache error. well the rom booted up and quickly realized.........my phone would not recognize sim cards, there was no "reboot" option in the power menu and lastly no "navigation" app anymore .....and would not reboot to recovery from CMW
so being being that alot of issues were present i decided to re-flash everything with "SP Flash"
same issues were present... so desperately i just started trying stuff....dumb i know..
well in "SP Flash Tool" i went to the "Format" tab & accidentally hit "format whole flash"
so now the phone is completely bricked and wont power on. However my computer still recognizes the phone as "Mk usb device" or whatever.
"SP flash tool" wont let me flash anything and gives me this error...
""BROM ERROR : S_DL_GET_DRAM_SETTING_FAIL(5054) [EMI] Obtain DRAM Failed! [HINT]: Please check your load matches to your target which is to be downloaded.""
THL's links are down for an official rom restore... and they have virtually no support. little to no info on the web.. and my work phone is useless....please help me... atleast get it to boot!!!!!!! im begging you guys!!! ill pay via paypal!!
lenovo s820
I have the same problem BROM Error (5054)
Happens after following this link h ttp: // w w w.indragunawan.com/2013/09/installing-miui-v5-rom-on-lenovo-s820. html
Maybe I need the Lenovo S820 original scatter file.
:crying:
Please help me
Please help, i tried to install ROM for OT 4007d but phone cant walkup.
i searched this forum and found ROM for Arbian and bKRA but when connected to sp flash tool give me error.
if i choose download only in sp flash tool give error PMT changed must be downloaded.
if i choose format all + download give error 5007.
what should i do???
Hi there guys @ xda.
I need help with my mtk6572 phone which i bricked in a noob way.
I need help flashing it with SP Flash Tool which gives an error as described in title.
Here is how i bricked it.
Today i decided that i want to flash a custom recovery on my phone, so i did and it worked.
I experienced a bug on the recovery and decided i wanted to put the stoc recovery back.
I flashed it back and the recovery booted fine, wiped chache and did factory reset.
After i did that my phone got stuck on boot animation.
I then decided that it was a good idea to flash to complete stock rom back to my phone,
but chose the forma all + download option, so that the changes the custom recovery made
were deleted. Well, so i thought...
Right after the format i got an error that said that my firmware is not for my phone and failed.
Now if i try to format or download the stock rom (which i backed up from my device before flashing)
i get the error code in the title.
I tried uninstalling all the mtk drivers from my pc. When i connect my device it is picked up in device manager
as "unknown device", i then updated the drivers with mediatek preloader driver (and tried all the mtk drivers out there)
but the flash tool still gives the same error.
After i press the download button, and connect my phone, the bar at the bottom goes to 100%(red colour) then stays like that for 41 seconds.
Then it gives the error code and fails to flash.
I tried everything, from removing the battery, pressing vol+, vol-, power and all the combos in between, nothing.
If someone could help me unbrick my phone, i would be very greatfull.
P.S I have the stock rom backed up from my device and prepared with mtk droid tools for flash tool.
Hi,
Thanks for using XDA assist.
Please read this guide if you haven't already:
[TUT]MTK Android (Sp flash tool ) tutorial
If the guide doesn't help, please create a XDA account and ask your question in the link directly above as well.
Good Luck! - gsstudios
Yesterday i made a mistake and tried to install mtk6572 preloader on mtk6580 device But an Error box appeared said that the scatter isn't capable with mtk6580 or something with that sort but the problem is after i try the installation the device won't boot or charge or turn on and
when i put the usb in pc it recognize the device but the device wont get flashed (when i use flash tool it wont download and when i remove the usb it give this error brom error s_brom_cmd_startcmd_fail (0x7d5))
I want to know is it the battery ? or i installed the wrong preloader ? :crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Isslam_Hosni said:
Yesterday i made a mistake and tried to install mtk6572 preloader on mtk6580 device But an Error box appeared said that the scatter isn't capable with mtk6580 or something with that sort but the problem is after i try the installation the device won't boot or charge or turn on and
when i put the usb in pc it recognize the device but the device wont get flashed (when i use flash tool it wont download and when i remove the usb it give this error brom error s_brom_cmd_startcmd_fail (0x7d5))
I want to know is it the battery ? or i installed the wrong preloader ? :crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
It is because of you flashed wrong preloader.
Ashwinrg said:
It is because of you flashed wrong preloader.
Click to expand...
Click to collapse
Thnx for replying, don't you know how to fixed it my phone is infinix hot 4
Hello and first of all i'm not sure if this is the correct place to post my question if not sorry i am new here.
well i have a oukitel wp6 phone that all of a sudden went into factory mode loop tried reeboting, wipe and restore factory settings many times and nothng so decided to flash with sp tool fist tried with tool from original oukitel page with costum rom diidn't work, so tried with sp tool and MTK tool had problems with verification tried 3 diffrent rom including custom rom from original oukitel page, same problem so tried bypassing with libusb and bypass utility master and exploits original MTK USB VCOM drivers all seemed to go well but when tried to flash with sp flash tool i must have done something very wrong now my phone is dead no light no boot the sp flash tool doesn't even reconize the phone when i try to flash the boot loader. anyway my question is is this it or is there still a posibility to recover my phone?
any help will be very apreciated.
thank you,
angel
nobody? any ideas?