Hello and first of all i'm not sure if this is the correct place to post my question if not sorry i am new here.
well i have a oukitel wp6 phone that all of a sudden went into factory mode loop tried reeboting, wipe and restore factory settings many times and nothng so decided to flash with sp tool fist tried with tool from original oukitel page with costum rom diidn't work, so tried with sp tool and MTK tool had problems with verification tried 3 diffrent rom including custom rom from original oukitel page, same problem so tried bypassing with libusb and bypass utility master and exploits original MTK USB VCOM drivers all seemed to go well but when tried to flash with sp flash tool i must have done something very wrong now my phone is dead no light no boot the sp flash tool doesn't even reconize the phone when i try to flash the boot loader. anyway my question is is this it or is there still a posibility to recover my phone?
any help will be very apreciated.
thank you,
angel
nobody? any ideas?
Related
I have got a chinese clone phone with MTK6573V which was bricked by flashing a wrong firmware image via CWM-based custom recovery BUT after flashing the wrong firmware my phone cant even boot not even in recovery mode.Nor i am able to write Recovery via SP Flash Tool v2.1134.00 it always give me error :
BROM ERROR:S_DL_GET_DRAM_SETTING_FAIL(5054)
[EMI]obtain DRAM Failed!
[HINT]lease check your load matches to your target which is to be download.
http://img838.imageshack.us/img838/3817/mtkerror.jpg
My phone is only able to make MTK PRELOADER PORT nothing else, no back light, no recovery mode
And now my phone also dont make MT65x3 USB VCOM Port so i am only able to connect phone with SP TOOLS when DA DOWNLOAD ALL is enabled otherwise it wont connect
mtk6573
hello there
i read your post and you has exacly the same problem im having with my phone.
did you manage to solve the problem?
if you did can you please help me out.
Thx
I have the same problem.
It`s bricked, nothing works and i cannot even upload the preloader or anything
EDIT : Upgraded to latest SP Flash tool and now i get a new error 5007
I have the same problem in MTK6575. Any solution?
B.R.
check the following link may be that will be helpful for you guys
http://www.labandroid.com/china/2013/02/flash-cwm-recovery-to-mtk-phones-without-sp-flash-tool/
Applied a rom from here http://www.needrom.com/mobile/umi-cross-c1/ and now my phone boots up in Chinese so have no way of getting into cwm recovery to try out other roms. Is there any way out of this?
All I can come up with is SP flash tools v3 to get me out of this quandry. Something i've not used before (SP Flash tools) and which I've tried tonight without success. Using MTK Droid tools I backed up my original rom ages ago but now am having zero success at getting SP Flash tools to restore this. When I point it at the scatter file it just stalls at 'searching' and nothing happens?
Any ideas would be appreciated
Hello,
I have a chines smartphone named Alps AW880. It uses an MT6577 chipset. I was trying to instal CWM on it which failed because of the signature verification. I used SP flash tool and that worked fine but everytime the phone tries to boot into recovery, it turns black and restart. I tried this tens of times got frustrated and formatted whole flash I don't have my stock ROM or recovery and have no idea which custom recovery will work. The phone is still detected on SP flash tool and I'm able to flash recovery.img but it doesn't work. Now the phone is not turning on at all.
I need help please can this be unbricked?
Hey Guys
So I got the newest THL T100 Kitkat rom on needroms did the factory reset / format now I boot to a black screen. I cant even get into the Chinese recovery menu.
Trying to use SP Flash Tools V5.1343.01 with the rom from Needroms and a scatter file I got on XDA but flash tools does not do anything when I click Download.
Im thinking this is down to the drivers the Phone keeps installing as a HTC Dream.
I did have 2 questions
do I not link SP Flash to the Rom I want installed ?
Were can I find a download of Windows 8 THL T100 drivers ? (I think this is the reason)
I have checked many guides but the version of SP they use is way different but I seen this version being recommended.
Please help miss my phone !!
Ok I got the phone booting so that SP Tools can download to it.
Now My question is how can I install a recovery (CWM & TWRP) using SP tool ?
I extracted the CWM software and used the image I.e in SP Tools I had everything deselected bar Recovery and I linked the locationg to the CWM IMG, It booted to CWM but couldnt load it and kept restarting
Hi there guys @ xda.
I need help with my mtk6572 phone which i bricked in a noob way.
I need help flashing it with SP Flash Tool which gives an error as described in title.
Here is how i bricked it.
Today i decided that i want to flash a custom recovery on my phone, so i did and it worked.
I experienced a bug on the recovery and decided i wanted to put the stoc recovery back.
I flashed it back and the recovery booted fine, wiped chache and did factory reset.
After i did that my phone got stuck on boot animation.
I then decided that it was a good idea to flash to complete stock rom back to my phone,
but chose the forma all + download option, so that the changes the custom recovery made
were deleted. Well, so i thought...
Right after the format i got an error that said that my firmware is not for my phone and failed.
Now if i try to format or download the stock rom (which i backed up from my device before flashing)
i get the error code in the title.
I tried uninstalling all the mtk drivers from my pc. When i connect my device it is picked up in device manager
as "unknown device", i then updated the drivers with mediatek preloader driver (and tried all the mtk drivers out there)
but the flash tool still gives the same error.
After i press the download button, and connect my phone, the bar at the bottom goes to 100%(red colour) then stays like that for 41 seconds.
Then it gives the error code and fails to flash.
I tried everything, from removing the battery, pressing vol+, vol-, power and all the combos in between, nothing.
If someone could help me unbrick my phone, i would be very greatfull.
P.S I have the stock rom backed up from my device and prepared with mtk droid tools for flash tool.
Hi,
Thanks for using XDA assist.
Please read this guide if you haven't already:
[TUT]MTK Android (Sp flash tool ) tutorial
If the guide doesn't help, please create a XDA account and ask your question in the link directly above as well.
Good Luck! - gsstudios