Applied a rom from here http://www.needrom.com/mobile/umi-cross-c1/ and now my phone boots up in Chinese so have no way of getting into cwm recovery to try out other roms. Is there any way out of this?
All I can come up with is SP flash tools v3 to get me out of this quandry. Something i've not used before (SP Flash tools) and which I've tried tonight without success. Using MTK Droid tools I backed up my original rom ages ago but now am having zero success at getting SP Flash tools to restore this. When I point it at the scatter file it just stalls at 'searching' and nothing happens?
Any ideas would be appreciated
Related
Hello,
I have a chines smartphone named Alps AW880. It uses an MT6577 chipset. I was trying to instal CWM on it which failed because of the signature verification. I used SP flash tool and that worked fine but everytime the phone tries to boot into recovery, it turns black and restart. I tried this tens of times got frustrated and formatted whole flash I don't have my stock ROM or recovery and have no idea which custom recovery will work. The phone is still detected on SP flash tool and I'm able to flash recovery.img but it doesn't work. Now the phone is not turning on at all.
I need help please can this be unbricked?
Hey Guys
So I got the newest THL T100 Kitkat rom on needroms did the factory reset / format now I boot to a black screen. I cant even get into the Chinese recovery menu.
Trying to use SP Flash Tools V5.1343.01 with the rom from Needroms and a scatter file I got on XDA but flash tools does not do anything when I click Download.
Im thinking this is down to the drivers the Phone keeps installing as a HTC Dream.
I did have 2 questions
do I not link SP Flash to the Rom I want installed ?
Were can I find a download of Windows 8 THL T100 drivers ? (I think this is the reason)
I have checked many guides but the version of SP they use is way different but I seen this version being recommended.
Please help miss my phone !!
Ok I got the phone booting so that SP Tools can download to it.
Now My question is how can I install a recovery (CWM & TWRP) using SP tool ?
I extracted the CWM software and used the image I.e in SP Tools I had everything deselected bar Recovery and I linked the locationg to the CWM IMG, It booted to CWM but couldnt load it and kept restarting
Hi... I unlocked bootloader for my (Letv Le 1s X507) through adb, and phone got bricked ( Just keeps rebooting itself ). I tried flashing various stock ROMs through SP Flash tool (Download Agent - MTKAllinone.bin) and ROM scatter file, but the progress on SP tool never goes beyond 0%.
Then I started experimenting with SP flash, I tried selecting (Download Agent - DApl.bin) and download only boot,recovery it goes successfully. The issue is with Preloader file when I download it, it gives different errors.
I'm using Win7 - 32 bit. Tried different Vcom drivers, changing port / cable / ROMs / SP versions nothing works. I'm stuck
Thanks for reading this & Please Help.
UPDATE - Issue Resolved.
Here's what I did, Used SP flash to download boot, system, recovery etc everything except Bootloader. Because boot loader was the culprit here which was not getting flashed ( Still don't know what's the issue but I doubt it's Win 7 - 32bit driver issue ). So gave it around 2 hours with SP flash, again the progress was 0% throughout still gave it time. And I think it was actually flashing.
And then I got stock recovery, then flashed stock rom by otg through stock recovery. Still it gave same bootloops, but I got into Fastboot. Now the game starts, ran ADB commands flashed twrp. Already had nandroid, flashed it. Finally flashed RR 5.85 this time it booted up without any issues. :laugh:
Hello and first of all i'm not sure if this is the correct place to post my question if not sorry i am new here.
well i have a oukitel wp6 phone that all of a sudden went into factory mode loop tried reeboting, wipe and restore factory settings many times and nothng so decided to flash with sp tool fist tried with tool from original oukitel page with costum rom diidn't work, so tried with sp tool and MTK tool had problems with verification tried 3 diffrent rom including custom rom from original oukitel page, same problem so tried bypassing with libusb and bypass utility master and exploits original MTK USB VCOM drivers all seemed to go well but when tried to flash with sp flash tool i must have done something very wrong now my phone is dead no light no boot the sp flash tool doesn't even reconize the phone when i try to flash the boot loader. anyway my question is is this it or is there still a posibility to recover my phone?
any help will be very apreciated.
thank you,
angel
nobody? any ideas?
Hello, I need some help to bring back to life a bricked MTK phone. Let me try to give you all facts in brief:
- The phone is MyPhone Hammer Energy 2 with MTK 6761 (let's call it Bricked Phone)
- Stock firmware is based on Android 11 - unfortunatelly stock image cannot be obtained from anywhere, manufacturer also refuses to send it. Good news is that i have the exact same phone in working condition, from which hopefully i can copy what's needed (let's call it Working Phone).
- Owner of the Bricked Phone tried to root it - this failed, the phone was showing DM-Verity corruption error and after bypoassing it was boot looping after the logo.
- Without knowing or having the Working Phone i found only an Android 9 stock image - tried to flash it through SP Flash Tool which bricked the phone - buttons do nothing, but when attached to a charger the charing light lits up. PC is also able to identify it.
- After i bricked it i took the Working Phone from a friend. I downloaded the firmware from it using two methods - by SP Flash Tool and WWR tool and also by the MTK Client tool.
- I tried flashing the rom from the Working Phone on the Bricked Phone by SP Flash Tool - i'm able to flash only the Preloader, Recovery and Boot, for all other partitions SP Flash Tool is giving me ERROR: STATUS SEC IMG TYPE MISMATCH. Phone is still dead even after flashing Preloader, Recovery and Boot.
- I tried flashing using the MTK Client tool (using the python mtk w command), flash finishes fine, but i'm still not able to boot the phone.
- I disassembled the phone, disconnected the battery and once again tried to flash using the MTK Client tool - same result, flash completes successfully, but the phone is still a brick.
What am i doing wrong? i followed step by step all guides that i was able to find and still i'm not able to resurrect the phone using the partitions downloaded from the Working Phone.