Database Info

How to root P6200 Galaxy Tab running ICS v 4.0.4(Austria)

I upgraded my P6200 Galaxy Tab 7.0 plus with Austria ICS 4.0.4. Now, how to root this version? Please, help me or write a tutorial post. I'll be waiting.........

Root Galaxy Tab P6800/P6200 ICS 4.04
kyawswaraung said:
I upgraded my P6200/P6800 Galaxy Tab 7.7/7.0 plus with Austria ICS 4.0.4. Now, how to root this version? Please, help me or write a tutorial post. I'll be waiting.........
Click to expand...
Click to collapse
It's Root for Galaxy tab 7.7/7.0 Plus ICS4.0.4 Try it.......Works.
Root Galaxy tab P6800/P6200 ICS4.0.4
Instruction Below.
- Download these 2 files ( CWM.zip and root.zip ) and put in your SDCARD:
- Reboot to recovery: (Hold Volume Up+Power till it reboot to recovery)
* Apply update from internal storage, instead of external storage
- Choose CWM.zip and wait until CWM recovery appear.
- Once the cwm recovery appear: Touch the screen to choose and navigate the options
* This cwm recovery is only temporary cwm recovery.
Once cwm recovery is installed, navigate and;
- Choose install zip from sdcard.
- Choose zip from sdcard.
- Choose root.zip ;and Yes - Install root.zip.
- Once done, choose reboot system now.
* Your device is rooted without permanent cwm recovery: If you don't need cwm recovery. You can stop at here.
You will find superuser app in your drawer
When Finish, REBOOT. You're done!
Credit:
Great thanks to, http://forum.xda-developers.com/showthread.php?t=1756304
Tutorial by: Wayne Yong
http://www.wayneyong.com

Thanks a lot. I'll try this evening and I'll get back you tomorrow.
Thanks again

kyawswaraung said:
Thanks a lot. I'll try this evening and I'll get back you tomorrow.
Thanks again
Click to expand...
Click to collapse
Confirmed on my 6200 with ICS - followed steps above and voila - sorted
Thanks

michaelmmr said:
Confirmed on my 6200 with ICS - followed steps above and voila - sorted
Thanks
Click to expand...
Click to collapse
After i enter to CWM recovery, I choosed Install update from sd and choose root.zip but there are four option after that. All are NO.
How can I choose YES? When I choose NO, it back to previous state and at the top of all NO option, the sentence say " Can't mount SD"
What should I do?
Thanks for your confirm.

kyawswaraung said:
After i enter to CWM recovery, I choosed Install update from sd and choose root.zip but there are four option after that. All are NO.
How can I choose YES? When I choose NO, it back to previous state and at the top of all NO option, the sentence say " Can't mount SD"
What should I do?
Thanks for your confirm.
Click to expand...
Click to collapse
Use your volume button to scroll up (or down), there are a lot of NO's but there is a YES there

michaelmmr said:
Use your volume button to scroll up (or down), there are a lot of NO's but there is a YES there
Click to expand...
Click to collapse
Thanks a lot all. I got it. Finally my device has been rooted. ( I found YES option)

Thank you.
Just upgraded from the cranky GB and now rooted!
Will there be a CWM icon (cos I don"t see it), I have install ROm mananger as well.

michaelmmr said:
Use your volume button to scroll up (or down), there are a lot of NO's but there is a YES there
Click to expand...
Click to collapse
i've try all the step carefully but still not root my phone
it's say can't mount sd card update something like that...help me please

jerung16 said:
i've try all the step carefully but still not root my phone
it's say can't mount sd card update something like that...help me please
Click to expand...
Click to collapse
hi jerung please select install from internal you can see root.zip file there once completed just back and reboot thanks:good:

hi,I've upgraded my tablet's OS to Android 4.0.4 Vietnam! Is it any different than the root you've given or it's the same?!
My Tablet:Samsung Galaxy P6200+
OS:Android 4.0.4 Vietnam
My Country:Iran
Thank's a lot

yong223 said:
It's Root for Galaxy tab 7.7/7.0 Plus ICS4.0.4 Try it.......Works.
Root Galaxy tab P6800/P6200 ICS4.0.4
Instruction Below.
- Download these 2 files ( CWM.zip and root.zip ) and put in your SDCARD:
- Reboot to recovery: (Hold Volume Up+Power till it reboot to recovery)
* Apply update from internal storage, instead of external storage
- Choose CWM.zip and wait until CWM recovery appear.
- Once the cwm recovery appear: Touch the screen to choose and navigate the options
* This cwm recovery is only temporary cwm recovery.
Once cwm recovery is installed, navigate and;
- Choose install zip from sdcard.
- Choose zip from sdcard.
- Choose root.zip ;and Yes - Install root.zip.
- Once done, choose reboot system now.
* Your device is rooted without permanent cwm recovery: If you don't need cwm recovery. You can stop at here.
You will find superuser app in your drawer
When Finish, REBOOT. You're done!
Visit webpage for more details:
StageAccessorize International
Contact: Waine Yong
[email protected]
+65 91922227
Credit:
Great thanks to, http://forum.xda-developers.com/showthread.php?t=1756304
Click to expand...
Click to collapse
hi,I've upgraded my tablet's OS to Android 4.0.4 Vietnam! Is it any different than the root you've given or it's the same?!
My Tablet:Samsung Galaxy P6200+
OS:Android 4.0.4 Vietnam
My Country:Iran
Thank's a lot

UNTD said:
hi,I've upgraded my tablet's OS to Android 4.0.4 Vietnam! Is it any different than the root you've given or it's the same?!
My Tablet:Samsung Galaxy P6200+
OS:Android 4.0.4 Vietnam
My Country:Iran
Thank's a lot
Click to expand...
Click to collapse
Same method. You can try this. :cyclops:

yong223 said:
It's Root for Galaxy tab 7.7/7.0 Plus ICS4.0.4 Try it.......Works.
Root Galaxy tab P6800/P6200 ICS4.0.4
Instruction Below.
- Download these 2 files ( CWM.zip and root.zip ) and put in your SDCARD:
- Reboot to recovery: (Hold Volume Up+Power till it reboot to recovery)
* Apply update from internal storage, instead of external storage
- Choose CWM.zip and wait until CWM recovery appear.
- Once the cwm recovery appear: Touch the screen to choose and navigate the options
* This cwm recovery is only temporary cwm recovery.
Once cwm recovery is installed, navigate and;
- Choose install zip from sdcard.
- Choose zip from sdcard.
- Choose root.zip ;and Yes - Install root.zip.
- Once done, choose reboot system now.
* Your device is rooted without permanent cwm recovery: If you don't need cwm recovery. You can stop at here.
You will find superuser app in your drawer
When Finish, REBOOT. You're done!
Visit webpage for more details:
StageAccessorize International
Contact: Waine Yong
[email protected]
+65 91922227
Credit:
Great thanks to, http://forum.xda-developers.com/showthread.php?t=1756304
Click to expand...
Click to collapse
success! thanks a lot dude..working fine with ICS (Malaysia)

Not working
braderj said:
success! thanks a lot dude..working fine with ICS (Malaysia)
Click to expand...
Click to collapse
Hi, I am running ICS 4.04 on my P6200. My recovery only gives me an option to install from external SD but does not read the installed sd card. Tried it with two different SD cards. Any help please

Help needed. I've brick my GT-P6200L
Can anyone please help me unbrick my GT-P6200L.
Got messed up somewhere between cwm.
Now everything all gone.
I can't boot up at all no matterwhat i've tried.

kyawswaraung said:
After i enter to CWM recovery, I choosed Install update from sd and choose root.zip but there are four option after that. All are NO.
How can I choose YES? When I choose NO, it back to previous state and at the top of all NO option, the sentence say " Can't mount SD"
What should I do?
Thanks for your confirm.
Click to expand...
Click to collapse
I had the same problem just format ur sd card or change it it will work
Sent from my GT-P6200 using xda premium

authentication failed
yong223 said:
It's Root for Galaxy tab 7.7/7.0 Plus ICS4.0.4 Try it.......Works.
Root Galaxy tab P6800/P6200 ICS4.0.4
Instruction Below.
- Download these 2 files ( CWM.zip and root.zip ) and put in your SDCARD:
- Reboot to recovery: (Hold Volume Up+Power till it reboot to recovery)
* Apply update from internal storage, instead of external storage
- Choose CWM.zip and wait until CWM recovery appear.
- Once the cwm recovery appear: Touch the screen to choose and navigate the options
* This cwm recovery is only temporary cwm recovery.
Once cwm recovery is installed, navigate and;
- Choose install zip from sdcard.
- Choose zip from sdcard.
- Choose root.zip ;and Yes - Install root.zip.
- Once done, choose reboot system now.
* Your device is rooted without permanent cwm recovery: If you don't need cwm recovery. You can stop at here.
You will find superuser app in your drawer
When Finish, REBOOT. You're done!
Visit webpage for more details:
StageAccessorize International
Contact: Waine Yong
[email protected]
+65 91922227
Credit:
Great thanks to, http://forum.xda-developers.com/showthread.php?t=1756304
Click to expand...
Click to collapse
It's telling me the authentication failed after trying to install the root.zip. Do you know what i can do or am I doing something wrong?

Can anyone teach me how to UNroot?

Thanks
UNTD said:
hi,I've upgraded my tablet's OS to Android 4.0.4 Vietnam! Is it any different than the root you've given or it's the same?!
My Tablet:Samsung Galaxy P6200+
OS:Android 4.0.4 Vietnam
My Country:Iran
Thank's a lot
Click to expand...
Click to collapse
Thanks :good:
It worked
It helped solve my Copy and Paste problems too.

Everything For Micromax A110 Canvas 2

Everything for A110
ROMS:
Stock:
Stock ROM V1 - http://d-h.st/NOR
Stock ROM V2 - http://d-h.st/0lp
Mobistel Cynus T2 ROM - http://www.sendspace.com/file/usu6q7 (Flashable zip)
Flash tool - http://goo.gl/4tyQ5
Custom ROMS:
JMP Xtream - http://bit.ly/ZacyS2
Dr.Bhokali ROM - http://bit.ly/Zrslki
Radeon ROM - http://d-h.st/PnP
Drivers:
http://bit.ly/13bkuq2
Rooting:
Rooting Tool - http://bit.ly/WAuST3
1. Enable USB De-bugging from Settings- Developer Options - USB Debugging
2. Download and Extract the Rooting tool in a single folder
3. Make sure the Drivers are installed
4. Right click on the 'Runme.bat' in the rooting tool and click 'Run as Administrator'
5. Connect the device and press '1'
6. Wait for the process to complete
Recovery:
Stock - http://bit.ly/137WVzj
Clockworkmod - http://bit.ly/WidRft
1. Download 'Mobile Uncle Tools' from Play Store.
2. Make sure your Phone is rooted
3. Rename the recovery you want to flash to 'recovery.img' and place it in the root of
your SD card.
4. Select 'Recovery Update' in 'MUT' and select the recovery.img from the list.
Storage Swapping:
Download - http://d-h.st/LFT
1. Install 'Root Explorer'
2. Using Root Explorer go to /system/etc and rename the file 'vold.fstab' to 'vold.fstab.bak'
3. Paste the downloaded 'vold.fstab' file to /system/etc and give system permissions
4. Reboot!
init.d Support (Required to run Supercharger):
1. Download 'Busybox Insatller' from Play Store.
2. Install Busybox 1.18.2 from 'Busybox Installer'
3. Download 'Script Manager' from Play Store.
4. Using 'Root Explorer' create a folder in the name of 'init.d' in /system/etc and give system permissions
5. Download the script from this link - http://bit.ly/WBY4ca
6. Open 'Script manager and browse to this script and run it as 'Superuser'
7. Reboot!
SuperCharger (After Enabling init.d):
1. Download Supercharger script - http://bit.ly/oBhiFg
2. Open 'Script Manager' and browse to the downloaded script.
3. Run it as Super user and the select the option you want
4. Reboot!
Entropy Seeder:
Use this to enhance your gaming experience and smoothness
1. Download Seeder Entropy - http://bit.ly/13bnMtm
2. Then flash this Zip through CWM - http://bit.ly/Uv8Fuy
3. Wipe cache and Dalvik Cache.
4. Reboot!.
12mp Camera Patch:
Flash via CWM this to use 12mp rear and 1.3mp front camera - http://bit.ly/Williy
Credits go to many. As of now I reckon Dileep Vargese and 'Droidiser.in'. If anyone knows, bring to my notice please.
Will be updated when more comes in
Pinocchio's nose grew with lies. My knowledge grows with 'Thanks' . Help it grow please
Facebook Support Group - https://www.facebook.com/groups/Micromaxcanvas2

kishoredroid said:
Everything for A110
ROMS:
Stock:
Stock ROM V1 - http://d-h.st/NOR
Stock ROM V2 - http://d-h.st/0lp
Mobistel Cynus T2 ROM - http://www.sendspace.com/file/usu6q7 (Flashable zip)
Flash tool - http://goo.gl/4tyQ5
Custom ROMS:
JMP Xtream - http://bit.ly/ZacyS2
Dr.Bhokali ROM - http://bit.ly/Zrslki
DZire ROM - http://bit.ly/TT21dQ
Drivers:
http://bit.ly/13bkuq2
Rooting:
Rooting Tool - http://bit.ly/WAuST3
1. Enable USB De-bugging from Settings- Developer Options - USB Debugging
2. Download and Extract the Rooting tool in a single folder
3. Make sure the Drivers are installed
4. Right click on the 'Runme.bat' in the rooting tool and click 'Run as Administrator'
5. Connect the device and press '1'
6. Wait for the process to complete
Recovery:
Stock - http://bit.ly/137WVzj
Clockworkmod - http://bit.ly/WidRft
1. Download 'Mobile Uncle Tools' from Play Store.
2. Make sure your Phone is rooted
3. Rename the recovery you want to flash to 'recovery.img' and place it in the root of
your SD card.
4. Select 'Recovery Update' in 'MUT' and select the recovery.img from the list.
Storage Swapping:
Download - http://d-h.st/LFT
1. Install 'Root Explorer'
2. Using Root Explorer go to /system/etc and rename the file 'vold.fstab' to 'vold.fstab.bak'
3. Paste the downloaded 'vold.fstab' file to /system/etc and give system permissions
4. Reboot!
init.d Support (Required to run Supercharger):
1. Download 'Busybox Insatller' from Play Store.
2. Install Busybox 1.18.2 from 'Busybox Installer'
3. Download 'Script Manager' from Play Store.
4. Using 'Root Explorer' create a folder in the name of 'init.d' in /system/etc and give system permissions
5. Download the script from this link - http://bit.ly/WlCPL6
6. Open 'Script manager and browse to this script and run it as 'Superuser'
7. Reboot!
SuperCharger (After Enabling init.d):
1. Download Supercharger script - http://bit.ly/oBhiFg
2. Open 'Script Manager' and browse to the downloaded script.
3. Run it as Super user and the select the option you want
4. Reboot!
Entropy Seeder:
Use this to enhance your gaming experience and smoothness
1. Download Seeder Entropy - http://bit.ly/13bnMtm
2. Then flash this Zip through CWM - http://bit.ly/Uv8Fuy
3. Wipe cache and Dalvik Cache.
4. Reboot!.
12mp Camera Patch:
Flash via CWM this to use 12mp rear and 1.3mp front camera - http://bit.ly/Williy
Credits go to many. As of now I reckon Dileep Vargese and 'Droidiser.in'. If anyone knows, bring to my notice please.
Will be updated when more comes in
Pinocchio's nose grew with lies. My knowledge grows with 'Thanks' . Help it grow please
Click to expand...
Click to collapse
Keep it up Good Going :good:
sorry for that (2 more rom in the treat)
i have one rom link
(Radeon™Rom : eXperience NXT)
http://forum.xda-developers.com/showthread.php?t=1981834

afzi said:
Keep it up Good Going :good:
sorry for that (2 more rom in the treat)
i have one rom link
(Radeon™Rom : eXperience NXT)
http://forum.xda-developers.com/showthread.php?t=1981834
Click to expand...
Click to collapse
radeon was not fully functional.. i will confirm with acervenky and if its ready for daily use, i will add it

Give the right way
kishoredroid said:
radeon was not fully functional.. i will confirm with acervenky and if its ready for daily use, i will add it
Click to expand...
Click to collapse
okes thanks for replay
i hope u used already thus three rom
can tell me, how i instal
Dzire Rom
http://forum.xda-developers.com/showthread.php?t=2043517]
couple of time i was install DZIRE ROM AND GO TO CUSTOM RECOVERY SELECT AND TRY TO INSTALL
BUT ITS FAIL
HOW CAN U USED OR INSTALL CAN U TELL ME
I WANT THIS ROM BECAUSE ITS MIUI BASED ROM

very informative post, my device is not detecting on my pc after installing custom rom. i am browsing sd card via using mobile go. can anyone help me to make it back to stock
thanks in advance
regards,
sunil:crying:

afzi said:
okes thanks for replay
i hope u used already thus three rom
can tell me, how i instal
Dzire Rom
http://forum.xda-developers.com/showthread.php?t=2043517]
couple of time i was install DZIRE ROM AND GO TO CUSTOM RECOVERY SELECT AND TRY TO INSTALL
BUT ITS FAIL
HOW CAN U USED OR INSTALL CAN U TELL ME
I WANT THIS ROM BECAUSE ITS MIUI BASED ROM
Click to expand...
Click to collapse
This ROM does not work. so removing it from the post.

sunilnair007 said:
very informative post, my device is not detecting on my pc after installing custom rom. i am browsing sd card via using mobile go. can anyone help me to make it back to stock
thanks in advance
regards,
sunil:crying:
Click to expand...
Click to collapse
Which ROM did you flash. BTW you can flash any of the stock ROMs from the post.

Removed system file from Micromax A110
Hi,
i was trying to do some changes to my micromax A110(android ics 4.0.4) with root access.
In an attempt to take a backup, i accidentally renamed /system/framework/framework.jar to /system/framework/framework.jar_old
Now the phone is not booting, i do not have CWM or other reflash tools.
I tried reflashing some ROM images, but they all fail with message: "Signature verification failed"
Is there someway i can regain access to the phone?
~Shailendra Kumar

maverick083 said:
Hi,
i was trying to do some changes to my micromax A110(android ics 4.0.4) with root access.
In an attempt to take a backup, i accidentally renamed /system/framework/framework.jar to /system/framework/framework.jar_old
Now the phone is not booting, i do not have CWM or other reflash tools.
I tried reflashing some ROM images, but they all fail with message: "Signature verification failed"
Is there someway i can regain access to the phone?
~Shailendra Kumar
Click to expand...
Click to collapse
Did you try flashing stock ROM V2 with the flash tool in the post? That will rewrite everything.

kishoredroid said:
Which ROM did you flash. BTW you can flash any of the stock ROMs from the post.
Click to expand...
Click to collapse
as on date i am using Radeaon rom v1 but my problem is same, pc is not resolving y phone. it only charging with usb cable. please help
:crying:
sunil

sunilnair007 said:
as on date i am using Radeaon rom v1 but my problem is same, pc is not resolving y phone. it only charging with usb cable. please help
:crying:
sunil
Click to expand...
Click to collapse
Cant get what you are trying to say. But download and install the drivers from the given link and try flashing your phone to stock ROM V2

Guys who would like to try out xperia launcher for their handsets can visit :
http://forum.xda-developers.com/showthread.php?t=2095956

Recovery not working
Last night i tried to get back to stock recovery so i restored it with MUT and when i went to recovery it didn't showed up. So i tried to get back in cwm recovery and it was also with the same result "Black screen" . My stock rom is working perfectly. Can anyone help me what to do as i want to install the T2 rom? Can we install it with flash tool?

Can the camera patch file should be installed in cwm or stock memory?
I am using jmp xtreme rom now.
Sent from my Samsung GT-S9081 using xda app-developers app

The stock V2 ROM..!
Can you please tell me if I have successfully updated or not here are my screen shots.....The orange signal for SIM1 is it correct? please help

nehalchoraria said:
Last night i tried to get back to stock recovery so i restored it with MUT and when i went to recovery it didn't showed up. So i tried to get back in cwm recovery and it was also with the same result "Black screen" . My stock rom is working perfectly. Can anyone help me what to do as i want to install the T2 rom? Can we install it with flash tool?
Click to expand...
Click to collapse
you cannot flah T2 via flash tool. go to /system/recovery-from-boot.p and rename it to 'recovery-from-boot.p.bak' and then try to flash stock recovery from MUT

violin.siva said:
Can the camera patch file should be installed in cwm or stock memory?
I am using jmp xtreme rom now.
Sent from my Samsung GT-S9081 using xda app-developers app
Click to expand...
Click to collapse
Flash it through CWM recovery

Arnav06 said:
Can you please tell me if I have successfully updated or not here are my screen shots.....The orange signal for SIM1 is it correct? please help
Click to expand...
Click to collapse
Yes.. you successfully flashed V2!

Cynus T2 ROM
I upgraded my A110 to Cynus T2 Yesterday from V2 ROM, and backup of userdata was taken immediately. Later, Factory Reset was done, and the problems started coming.
1) Default language changed to German, and the same was later changed to English by guessing the language menu.
2) The second major bottle neck was that there was no SIM connectivity to 2G network, either in SIM1 or SIM2. I tried everything possible, but failed.
3) My WIN7 laptop is now unable to detect my A110 in Switched OFF state with USB Debugging ON. As, a result, I am not able to flash back V2 ROM.
As a last resort, the previously saved user data was restored, and my A110 started working like a charm. Both the SIMs functional, and other features as per expectation. However, a factory reset will spoil every thing. Even now, my Laptop does not detect A110.
Kindly suggest how to revert back to V2 ROM.

JogyGeorge said:
I upgraded my A110 to Cynus T2 Yesterday from V2 ROM, and backup of userdata was taken immediately. Later, Factory Reset was done, and the problems started coming.
1) Default language changed to German, and the same was later changed to English by guessing the language menu.
2) The second major bottle neck was that there was no SIM connectivity to 2G network, either in SIM1 or SIM2. I tried everything possible, but failed.
3) My WIN7 laptop is now unable to detect my A110 in Switched OFF state with USB Debugging ON. As, a result, I am not able to flash back V2 ROM.
As a last resort, the previously saved user data was restored, and my A110 started working like a charm. Both the SIMs functional, and other features as per expectation. However, a factory reset will spoil every thing. Even now, my Laptop does not detect A110.
Kindly suggest how to revert back to V2 ROM.
Click to expand...
Click to collapse
Im on T2, no niggles. And it is getting detected without issues on the same win 7. When you connect your phone in factory mode, t2 will be recognized.

[Rom] Jelly Bean 4.1.1 for Qmobile Noir A8 by INCPak

Good things comes to those who wait - Yes now you can have AOSP Jelly Bean 4.1.1 on your Noir A8, previously we released LeWa and TouchWiz which been the most outstanding Roms but ICS 4.0.4 OS but this time JB 4.1.1
For the Screenshots : Check out this post: http://www.incpak.com/tech/qmobile-noir-a8-jellybean-4-1-1/
Ubaid ur Rehman Khan did it since today it’s his birthday too special thanks to Ali Akber who cooperated all the way to make it possible and I would like to congrats entire INCPak Team for this. In our previous Roms you checked JB Camera and Gallery ( TouchWiz ) and in LeWa the outstanding Music Player as well as SRS effects.
INCPak IS NOT RESPONSIBLE FOR ANY KIND OF DAMAGE TO YOUR PHONE, IF YOU MADE ANY MISTAKE.
NOTE: FLASH AT YOUR OWN RISK !!!
This is a Flash-able Zip file that can be flashed only from ClockWorkMod Recovery ( CWMR ) . Make sure that your phone is ROOTED before Installing ClockWorkMod Recovery. If your phone is not ROOTED than first Root Procedure and require files are there on the post click the post below:
http://www.incpak.com/alerts/root-method-qmobile-noir-a8/
And for Installing CWMR
1) Download MobileUncle MTKTools from play store.
2) Download CMWR file from either of these links.
Link I( Recovery.img )
Link II ( RECOVERY.IMG )
3) Copy CMWR(Recovery.img) to your SD card.
4) Open MobileUncle MTKTools software, select recovery update option and then select recovery.img file that you copied in to SD.
For flashing Rom follow these steps very carefully:
1) Download the ROM. (http://www.incpak.com/tech/asop-jelly-bean-4-1-1-for-no)
2. Copy the downloaded file on your SD-CARD.
3. Power off your phone.
4. Turn your phone on in recovery mode (by pressing VOLUME UP + POWER buttons).
5. Make a backup.
Select “backup and restore”. And then select “backup”. When it is done select “Go Back”.
6. Select Wipe/Data Factory Cache.
7. Select Wipe Cache Partition.
8. Go to advanced and select wipe dalvik cache.
9. Go back to the main menu.
10. Select “Install zip from sdcard” –> “Choose zip from sdcard” –> Now select “A8_4.1.1_INCPak_Fixed” –> Select ”Yes”
11. Phone will reboot itself into Jellybean.

Battery Draining issue!
What about the battery draining issue in JB rom? there is a post in INCPak that suggests not to use JB rom!

ubaid88 said:
Good things comes to those who wait - Yes now you can have AOSP Jelly Bean 4.1.1 on your Noir A8, previously we released LeWa and TouchWiz which been the most outstanding Roms but ICS 4.0.4 OS but this time JB 4.1.1
For the Screenshots : Check out this post: http://www.incpak.com/tech/qmobile-noir-a8-jellybean-4-1-1/
Ubaid ur Rehman Khan did it since today it’s his birthday too special thanks to Ali Akber who cooperated all the way to make it possible and I would like to congrats entire INCPak Team for this. In our previous Roms you checked JB Camera and Gallery ( TouchWiz ) and in LeWa the outstanding Music Player as well as SRS effects.
INCPak IS NOT RESPONSIBLE FOR ANY KIND OF DAMAGE TO YOUR PHONE, IF YOU MADE ANY MISTAKE.
NOTE: FLASH AT YOUR OWN RISK !!!
This is a Flash-able Zip file that can be flashed only from ClockWorkMod Recovery ( CWMR ) . Make sure that your phone is ROOTED before Installing ClockWorkMod Recovery. If your phone is not ROOTED than first Root Procedure and require files are there on the post click the post below:
http://www.incpak.com/alerts/root-method-qmobile-noir-a8/
And for Installing CWMR
1) Download MobileUncle MTKTools from play store.
2) Download CMWR file from either of these links.
Link I( Recovery.img )
Link II ( RECOVERY.IMG )
3) Copy CMWR(Recovery.img) to your SD card.
4) Open MobileUncle MTKTools software, select recovery update option and then select recovery.img file that you copied in to SD.
For flashing Rom follow these steps very carefully:
1) Download the ROM. (http://www.incpak.com/tech/asop-jelly-bean-4-1-1-for-no)
2. Copy the downloaded file on your SD-CARD.
3. Power off your phone.
4. Turn your phone on in recovery mode (by pressing VOLUME UP + POWER buttons).
5. Make a backup.
Select “backup and restore”. And then select “backup”. When it is done select “Go Back”.
6. Select Wipe/Data Factory Cache.
7. Select Wipe Cache Partition.
8. Go to advanced and select wipe dalvik cache.
9. Go back to the main menu.
10. Select “Install zip from sdcard” –> “Choose zip from sdcard” –> Now select “A8_4.1.1_INCPak_Fixed” –> Select ”Yes”
11. Phone will reboot itself into Jellybean.
Click to expand...
Click to collapse
I tested it personally its very nice stable fast rom but with less memory. Pls inform me when get its update

azhar63 said:
I tested it personally its very nice stable fast rom but with less memory. Pls inform me when get its update
Click to expand...
Click to collapse
I'm still using this fantastic rom and want its update. So if any body finds please inform me.

malick186 said:
What about the battery draining issue in JB rom? there is a post in INCPak that suggests not to use JB rom!
Click to expand...
Click to collapse
I don't have any battery draing issue in this fixed ROM

Any method to flash jellybean via odin....

[ROOT] Samsung Galaxy Pocket Plus GT-S5301

Rooting procedure for SAMSUNG Galaxy Pocket Plus ( GT-S5301 )
WARNING!!! This solution provided as is (with no warranty of any kind). Be careful because the described operations rather dangerous and possibly can brick your device. Author is not responsible for your device damage.
IMPORTANT: Usage of this method will affect the state of the "Custom BIN down" counter in your device. This means that you may have problems with official warranty.
OTHER NOTICES: Solution based on ICS 4.0.4 Russian Stock firmware. It will not affect the data on your device (contacts, files etc.). No wipe\hard reset needed.
Step 1. Getting software
1. Download Odin 3.0.7 here
2. Download modified stock recovery here
3. Download update package for rooting here (downloaded from here Thanks to Phil3759)
4. Install Samsung drivers\kies from this page
P.S. Sorry for ugly file storage solution - google drive. If it will open the zip archive just click "File" menu and click "Download" (or use Ctrl+S combo).
Step 2. Flash the updates
1. Switch off the device. Hold "volume down"+"home" buttons and press power button. When device switch on release the power button but continue to hold volume down and home until Download mode warning appear. Plug in the USB cable and press volume up button to continue. The device will load in ODIN download mode.
2. Run ODIN 3.0.7. Don't change any setting (checkboxes ) - leave them in default state. Your device should appear in "ID:COM" part of the screen as serial device (i.e. "COM38") - if not check if your USB port is functional and Samsung drivers installed correctly.
3. Click on PDA button and chose modified recovery file saved during step 1.2. Don't rename or decompress the file - otherwise it will not work.
Wait until ODIN decompress the package and check the checksums. After it just press START button and wait until the process is over.
4. Copy update package for rooting on SD card and put the card in device's slot.
5. Switch off your device again. Hold "volume up"+"home" buttons and press power button to switch on. Don't release volume up and home until the recovery loaded. Using volume up and volume down buttons navigate to menu item "apply update from external card" and press power button to commit operation. Then navigate to Root_Superuser_3.1.3......zip file and press power button again.
6. Done. Your device should be rooted now. You can check it with various free programs like Root Checker available at Google Play.
You can restore the stock recovery using the same flashing procedure as described above. The stock recovery image is available here
====================
Additional notices:
- I will upload the full stock firmware repacked for ODIN in a couple of days. You can use it to restore your device to default state (except the Custom BIN down counter).
- If the counter really bothering you - just wait a little - I'll upload pre-rooted system partition package which does not affect the counter.
- Do not try just blindly install the CWM or TWRP recovery packages made for another devices. It will not work and can cause some problems because at least one difference is crucial - recovery.fstab file in most of cases will contain wrong information about partitions so you can brick your device. Now I'm working on porting CWM recovery for s5301 and I hope it will not take much time.
Take care
=============================================================================================
=============================================================================================
2013-05-27 UPDATE: CWM recovery (GUI issues) ***THIS ONE IS OBSOLETE - USE NEXT SECTION BELOW "UPDATE: Working CWM recovery (GUI problems fixed)"***
---------------------------------------------------------------------------
CWM Recovery for S5301 (coriplus) is now available. Unfortunately there is still an issue with screen resolution but I suppose I'll fix it very soon. Despite an uncomfortable picture those people who needs backup\restore feature urgently can use it right now. Everything seems to be functional but if you discover some issues - please let me know.
1. Fakeflash zip image is here. Use it from previousely flashed Hacked Stock recovery: pure stock recovery will not load it.
To run it - put the update.zip to sdcard, boot to recovery, navigate to "apply update from external card" and choose the update.zip. Done! Now you are in CWM recovery and you can backup\restore your system. After rebooting the recovery you will see the Hacked Stock recovery again (this is what fakeflash means - CWM loads in memory but after reboot you have your old recovery again. So keep the update.zip on SD card to use it again).
2. ODIN image is here. This one for those who really hates the stock recovery and ready to run CWM permanently even with ugly screen resolution. Flsh with ODIN as described above.
When I fix the screen resolution I'll inform you about it here.
Enjoy.
=============================================================================================
=============================================================================================
2013-05-31 UPDATE: Working CWM recovery (GUI problems fixed)
---------------------------------------------------------------------------------------------------------
CWM User Interface fixed
1. Fixed CWM as fakeflash update.zip is here
2. Fixed CWM as ODIN image is here
Enjoy...
CURRENT STATUS:
-Rooting ...DONE
-CWM recovery ...DONE
NEXT STEPS:
- CM10.1 is in progress
=============================================================================================
=============================================================================================
2013-06-08 UPDATE: Pre-rooted image
---------------------------------------------------------------------
- System image for ODIN (pre-rooted) - does not affect the bin down counter. Link is here
=============================================================================================
=============================================================================================
2013-06-13 UPDATE: The way how to get device rooted and CWM recovery flashed without affecting the counter
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
There is a way to get root and CWM recovery without affecting the down bin counter:
Step 1: Flash the pre-rooted system partition via ODIN (it will not affect the counter and will not erase your personal data). Now you have rooted device but it is still has useless stock recovery.
Step 2: Copy recovery.img on SD card and insert it in your device.
Step 3: Turn the device on, wait untill OS loaded. Go to Settings -> Developer options and switch on the Usb Debugging.
Step 4: Connect USB cable, choose "Camera PTP" in USB PC Connection menu on your device - this menu appeares in notification area (that's important to get your sdcard mounted).
Step 5: Go to console on your PC and execute the following commands:
$ adb shell
[email protected]:/ $ su
[email protected]:/ # dd if=/mnt/extSdCard/recovery.img of=/dev/block/mmcblk0p6
Voila! You have your device rooted, you have CWM recovery flashed and the down bin counter wasn't affected.
=============================================================================================
=============================================================================================
2013-06-13 UPDATE: Russian Stock Firmware S5301XXAMC1 repacked for ODIN
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
As promised please find attached full stock firmware adapted for flashing with ODIN. It's non-rooted, with stock recovery. It will not erase your data so do not forget to perform factory reset if you need it.
=============================================================================================

Realy tanks, that post save my bone, im try to up with another post but get a soft brick, now im have my cell live again and rooted, waiting for mod roms and the CWM for us, tnks... again...

thank you very much it's work fine

CWM Recovery (Alpha) is available - see the first post update ( 2013-05-27).

Fixed CWM is available
Fixed CWM is available as fakeflash and ODIN image. See "2013-05-31 UPDATE" section in main message

Fixed CWM is available
blearreaz0n said:
Fixed CWM is available as fakeflash and ODIN image. See "2013-05-31 UPDATE" section in main message
Click to expand...
Click to collapse
which one is no change flash counter

Tnks
blearreaz0n said:
Rooting procedure for SAMSUNG Galaxy Pocket Plus ( GT-S5301 )
NEXT STEPS:
- CM10.1 is in progress
=============================================================================================
Click to expand...
Click to collapse
Tnks again, Im still waithing!! :fingers-crossed:

Hi, I didn't have an external sd card at this moment so what I did was flash CWM and then sideload the root package, pretty simple, so you can add this method as an alternative, it worked pretty good.

Recovery packages and counter
tarekmorsy said:
which one is no change flash counter
Click to expand...
Click to collapse
1) All fakeflash versions does not affect the counter (only the ODIN flashed images do it).
2) All fakeflashes are temporary (just loading in memory and active until reboot).
3) Unfortunately the stock recovery doesn't aloow to load CWM fakeflash or rooting package, so you need to flash CWM or at least hacked stock recovery via ODIN (an this operation will definitely affect the counter).
Take care

y3kt said:
Hi, I didn't have an external sd card at this moment so what I did was flash CWM and then sideload the root package, pretty simple, so you can add this method as an alternative, it worked pretty good.
Click to expand...
Click to collapse
Obviously the sideload should work ok as it is one of CWM features After you flashed CWM you can use all its' tools - sdcard is just simple common scenario. Anyways thanks for feedback - I'll add notice regarding adb sideload in the main post )

blearreaz0n said:
1) All fakeflash versions does not affect the counter (only the ODIN flashed images do it).
2) All fakeflashes are temporary (just loading in memory and active until reboot).
3) Unfortunately the stock recovery doesn't aloow to load CWM fakeflash or rooting package, so you need to flash CWM or at least hacked stock recovery via ODIN (an this operation will definitely affect the counter).
Take care
Click to expand...
Click to collapse
Thanks

Almost forget - I've uploaded the prerooted system.img as I promised (check 2013-06-08 UPDATE section of the main post in this thread).
Use ODIN to flash this image (PDA section).
It will not affect the counter. All your applications and personal data will survive because they are on another partition, but anyway It's strictly recommended to make a backup copy before flasing. As a result you'll get the rooted device without replacing stock recovery and without affecting the "down bin counter".
Sent from my GT-S5301 using xda app-developers app

I didn't see that
blearreaz0n said:
Almost forget - I've uploaded the prerooted system.img as I promised (check 2013-06-08 UPDATE section of the main post in this thread).
Use ODIN to flash this image (PDA section).
It will not affect the counter. All your applications and personal data will survive because they are on another partition, but anyway It's strictly recommended to make a backup copy before flasing. As a result you'll get the rooted device without replacing stock recovery and without affecting the "down bin counter".
Sent from my GT-S5301 using xda app-developers app
Click to expand...
Click to collapse
very good
much thanks

Please help i am from south africa and will this work for SA firmware i just want root nothing much... And please tell me step by step procedure am kind of confused.
Sent from my GT-S5300 using xda app-developers app

ultimat3m3 said:
Please help i am from south africa and will this work for SA firmware i just want root nothing much... And please tell me step by step procedure am kind of confused.
Sent from my GT-S5300 using xda app-developers app
Click to expand...
Click to collapse
Actually the first post in this thread contains step-by-step description of rooting process. And it should work for any s5301 device. But judging by the signature of your post, you have s5300 device which is copletely different. So I suppose you have to search this forum for solution developed exactly for your device...
Sent from my GT-S5301 using xda app-developers app

For those who wants the root and cwm but wishes to keep the counter untouched...
Please check the following section of the first post: "2013-06-13 UPDATE: The way how to get device rooted and CWM recovery flashed without affecting the counter"

Full Stock Firmware adapted for ODIN
If you need to restore stock firmware on your device, please check the following section of the first post in the current thread "2013-06-13 UPDATE: Russian Stock Firmware S5301XXAMC1 repacked for ODIN"

Okay russion firmware will work on mine?
Sent from my GT-S5300 using xda app-developers app
---------- Post added at 11:28 PM ---------- Previous post was at 11:07 PM ----------
My firmware S5301XXALK3
Sent from my GT-S5300 using xda app-developers app

ultimat3m3 said:
Okay russion firmware will work on mine?
Click to expand...
Click to collapse
Yes. It should work on any coriplus (S5301). I flash it on UAE device for example.
Sent from my GT-S5301 using xda app-developers app

Thanks could u pls upload root file on and odin thru a different server i cant download it via mobile and my laptop doesnt have internet... I only hqve the image file of ...rar.rar :beer:
Sent from my GT-S5300 using xda app-developers app

[Q] (Q) Help me.....About My Galaxy SL I9003

Sir i am worried about my Galaxy sl i9003.
I install CM 10.1 ALPHA 6 (4.2.2) in my galaxy SL its work fine but the bytery timing is very poor then i install (I9003JPKPH) but when its instal then my set is not startup to gingerbred 2.3.6. when i try to wipe cach/ fectory rest the error is (not formait sd E can't mount delvk cach ....) then i root it again and flashed it again to CM 10.1 alpha 6 its work fine. two month ago i instal( CM10,CM 9, IPHONE ROM) and then ever i want to go to gingerbred 2.3.6 there was no problum. but when i instal (CM10.1 Alpha 6) after that to go gingerbred i have problum when i try to wipe cache/fectory rest then the error is (not formait sd not mount delvk cach ...).and now i can't flash to (CM9,CM10,) only and only i can instal (CM 10.1 Alpha 6). but i want to install gingerbred 2.3.6. and you know wipe cach/fectory rest is must after the instal gingrbred 2.3.6. otherwise set restat again and again not on
please help me sir
I shell b thankfull to you.
in simply my orignal problm is that after( CM 10.1 Alpha 6 ) i instal gingrbred 2.3.6 when i try wipe cache/fectory rest then the error is such as (not mount sd delvk cach)
now tell me please what should i do.....?
i shall b thankfull to you please guide me..pleas pleas pleas....
thanks in advanc
sory for the bad ENGLISH.
Please help me please guide me.
i shell b thankfull to you and your team ever

mughees islam said:
Sir i am worried about my Galaxy sl i9003.
I install CM 10.1 ALPHA 6 (4.2.2) in my galaxy SL its work fine but the bytery timing is very poor then i install (I9003JPKPH) but when its instal then my set is not startup to gingerbred 2.3.6. when i try to wipe cach/ fectory rest the error is (not formait sd E can't mount delvk cach ....) then i root it again and flashed it again to CM 10.1 alpha 6 its work fine. two month ago i instal( CM10,CM 9, IPHONE ROM) and then ever i want to go to gingerbred 2.3.6 there was no problum. but when i instal (CM10.1 Alpha 6) after that to go gingerbred i have problum when i try to wipe cache/fectory rest then the error is (not formait sd not mount delvk cach ...).and now i can't flash to (CM9,CM10,) only and only i can instal (CM 10.1 Alpha 6). but i want to install gingerbred 2.3.6. and you know wipe cach/fectory rest is must after the instal gingrbred 2.3.6. otherwise set restat again and again not on
please help me sir
I shell b thankfull to you.
in simply my orignal problm is that after( CM 10.1 Alpha 6 ) i instal gingrbred 2.3.6 when i try wipe cache/fectory rest then the error is such as (not mount sd delvk cach)
now tell me please what should i do.....?
i shall b thankfull to you please guide me..pleas pleas pleas....
thanks in advanc
sory for the bad ENGLISH.
Please help me please guide me.
i shell b thankfull to you and your team ever
Click to expand...
Click to collapse
Hi, from A6 to revert to GB you have to flash full KPE
How to install
Warning only for lasted base CM10 Alpha4
if older base CM10 Alpha3 Full KPE please !!!
- Wip Factory
- Format/system format/emmc
- Flash Carbon and gapps
- Reboot recovery
- Wipe cache and dalvik cache
Flash first clean for mandatory starting
On CM10 Alpha 3 and all other basic Froyo, Gingerbread, ICS, JB
- drivers samsung.rar - 5.58 MB
- Open Odin 1.85 only !!!
- KPE FULL (do not forget the PIT) (Froyo only ! no forget bootloader)
reset odin then remove cable and battery after samsung logo
- LF2 (PDA only with Odin)
reset odin then remove cable and battery after second samsung logo
- CF Root LF2 (PDA only with Odin)
reset odin then remove cable and battery after samsung logo

KPE FULL (do not forget the PIT) (Froyo only ! no forget bootloader)
sir what is the meaning of (do not forget the PIT)....? is PIT a file....?
and about this ........ (Froyo only ! no forget bootloader)

E/Formait Volume;rfd Formait Failedon/dev/block/st110
Sir i instal gingerbred 2.3.6 in my galaxy SL I9003 when it compleat but my phone is not on it restart after samsung logo again and again when i take it recovey mod and want to b( wipe cach/fectory rest) then the erros is (E/Formait Volum: rfd Formait Failedon/dev/block/st110) .
what shoul i do. i m helpless please help me .I shell b thankfull to you forever
please please please sir help me.what should i do. i cant my phone on please sir help me i am waitin for your answer.

hey, to make sure every thing is ok follow this step by steb:
1- make sure you have kies installed or just install galaxy sl usb drivers (thanks to Zulfauzi).
2-Download odin3 v1.85 from the attachments.
3-Download XXKPE from here (thanks to kkrraazzyy).
4. Run Odin3 v1.85 (first extract all the files to a folder, don't launch odin3 from the archive (it's only my idea!))
5. Check Re-Partition, Auto Reboot and F. Reset Time.
6. Click PIT button and select this file: latona_20110114.pit
7. Set it to download mode : Press Volume down + OK first, then hold Power button.
8. Connect USB cable and the program will detect the phone's Com number.
9. Click Start button to download the PIT file to phone.
10. After it is Done Click on Reset button [Partition box should be unchecked automatically - Thanks to jaskir].
11. Click PDA button and select this file: CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar
12. Click PHONE button and select this file: MODEM_I9003XXKPE_REV_00_CL1041909.tar
13. Click BOOTLOADER button and select this file: APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar
14. Click CSC button and select this file: GT-I9003-CSC-MULTI-OXAKPE.tar
15: You should unplug usb cable, remove battery, insert battery and bring it back to download mode. I have never been able to bring it to download mode with usb plugged in. [Thanks to jaskir for this suggestion to make it clear to new users!]
16. Click Start button to flash these files to phone.
17. Do not touch anything till you see PASS on the program window.
18. Factory reset
19. [To fix issues that pertain] Reflash from steps 9 -15 again, No need of latona at this point.
thanks to Misledz for the instructions (original thread here)
or you can follow the same instructions to install full DDLF2 (thanks to sgatechwork), both are full stock firmwares.
Hope I helped you
If so, pls hit the "thanks" button

THANKS
Thankyou you to all. i am very happy. again thanks sir.:laugh::laugh::laugh::laugh:

Happy to hear that...
you're welcome bro