Database Info

Celkon a119 hd custom rom[jellybean}

AFTER INSTALLING TWRP RECOVERY FROM THE BELOW STEPS OR IF INSTALLED CWM FROM MY EARLIER POST THEN FIRST TAKE AN BACKUP SO THAT YOU CAN RESTORE IF ANY ERROR HAPPENS BECAUSE I DONT HAVE THE ORIGINAL COPY OF THE OS..
AND IF YOU HAVE INSTALLED CWM FROM MY ROOTING METHOD THEN SKIP ALL THE BELOW STEPS AND DIRECTLY DOWNLOAD THE ROM AND INSTALL IT BY PLACING IT IN SD CARD AND FLASHING IT
Downloads (http://www.mediafire.com/?ar2ccya8395d1):
SuperSU zip
TWRP
SP Flash Tool
MTK Drivers
MTK 6577 scatter file
if the driver didn't work download this http://www.4shared.com/zip/YXlLFoLm/...l_3_steps.html
install folder step 1 to 3
Place the scatter file and TWRP recovery in the SAME FOLDER.
rename twrp recovery to recovery.img
1. While the phone is still on, enable USB debugging (Settings > Developer options) then plug into PC. Allow drivers to install. Install the MTK drivers as well.
2. Mount phone as USB storage. Copy SuperSU zip to internal or external SD card. Unmount USB storage, then unplug phone from PC.
2. Turn off phone. Remove the battery.
3. Start SP Flash Tool. Under "Scatter-loading," choose the MT6577_Android_scatter_emmc.txt. You will see that RECOVERY has a check beside it. Click on "Download." A warning will appear, proceed anyway.
4. With your phone still off and the battery out, plug it in to the PC. Flashing should start. It will only take a few seconds. You'll see a green circle when it's done.
5. Unplug USB cable and put the battery back.
6. Enter recovery mode by Power and Volume + button. Release both buttons when you see the boot menu. Use Volume + to highlight "recovery." Then use Volume - to confirm.
7. Click "Install." Choose the appropriate tab (internal or external SD card).
8. Select UPDATE-SuperSU-1.25 zip. Swipe to confirm the update. It will flash. Go back to main menu of TWRP.
9. Click "Reboot system." Wait until you are fully booted into your homesceen.
10. Once booted, you should see SuperSU in your app drawer.
credits to ish gridote
s3 bootanimation n sound
s3 boot logo
Jelly bean icons
iphone ringtones
google play music
dolphin browser
apex launcher
deodexed
busybox
rooted
init.d
signal tweaks
3g tweaks
battery tweaks
gpu rendering
dns tweaks
media tweaks
v6 supercharger
kickasskernel
crossbreeder
reorganized build.prop file
uploading
http://www.4shared.com/folder/dJXI2ODd/_online.html
try open first in case of corrupt file
remove crossbreeder for much better battery
flash uninstall zip http://forum.xda-developers.com/show....php?t=2113150
and underclock for much longer battery download setcpu or no frillcpu or anything u want i dnt care..
save rom in SD card
reboot to CWM/TWRP
install rom via SD card
reboot
I'm not responsible for any loss of data or brick....
i think this only works on a119 hd not Q hd

screenshots please
Can you post screenshots plz?

sure...

can we apply this rooting method and ROM for the quadcore(a119q) version too?

Yes give a try...it may work...and report back...

There is good for 119q version version which is quite easy
Sent from my Celkon A119Q using Tapatalk 4 Beta
---------- Post added at 04:20 PM ---------- Previous post was at 04:17 PM ----------
Coz quad core uses different chipset
Sent from my Celkon A119Q using Tapatalk 4 Beta

Hello People! Anyone out there who can help me out with a custom ROM for HD 119Q. Please help!

techpick said:
Hello People! Anyone out there who can help me out with a custom ROM for HD 119Q. Please help!
Click to expand...
Click to collapse
Please follow this thread for your device custom ROM.
http://forum.xda-developers.com/showthread.php?t=2374660
Press thanks button if it's helpful.
Sent from my Nexus 7 using Tapatalk 4

Guys, I rooted my Celkon signature HD A119Q, but facing issues with the Recovery. I am not able to load recovery on to my phone. Pleas help!

techpick said:
Guys, I rooted my Celkon signature HD A119Q, but facing issues with the Recovery. I am not able to load recovery on to my phone. Pleas help!
Click to expand...
Click to collapse
What happened? Are you having issues with flashing CWM recovery?
Sent from my Nexus 7 using Tapatalk 4

Yes. Basically got it rooted. Then I had issues with flashing recovery and in a hurry I think I screwed it up by installing a wrong recovery using mobile uncle. Now neither can I hard reset my phone not can I go to recovery. If I try doing hard reset, it does all the process but once the phone switches on, it comes back to the situation where in I started with resetting. I know it was stupid of me to screw up the recovery, but please help dude.
Sent from my Celkon A119Q using xda app-developers app
Issue Sorted!

[GUIDE] Videocon A55 HD Rooting and Recovery related stuff

Heya,
Since there is not enough info on the web regarding the rooting procedure for Videocon A55 HD and custom recovery for this awesomely smooth device, I'm uploading the necessary files and step by step guide. Hope it helps all the users of this device.
Remember rooting would tamper the warranty of the device and should be exercised carefully. The procedures mentioned below have been personally tested by me however I take no responsibility in case you ruin your device although I would be here to help you in such a scenario. Besides this the rooting script was not created by me and all the credit goes to the respective developer.
1. Rooting Procedure
Make sure you have enabled "USB Debugging" under Developer Options on your phone.
Keep your phone disconnected from computer via USB
a) Download and Install the ADB Interface driver for MTK 6589
Link to ADB Drivers
b) Download and extract the rooting package
Link to the Rooting Package
c) Now go to the extracted package and open a command prompt to that location as Administrator.
d) Type run.bat in Command Prompt and a message must appear "Press enter to root your phone..."
e) Press any key
f) Now after a few seconds the message should be " * daemon started successfully *"
g) Now connect your phone via USB to the computer
h) The cmd would automatically start pushing the necessary files onto your phone and when the process completes your phone will restart
Now you are rooted.To check install any Root checker application from playstore. Remember to grant permission while running Root Checker app when a pop up appears. It is suggested to update the SuperSU app from playstore and execute it at least once after that to update the su binary. You can also update the busybox package from playstore because busybox supplied with the rooting package is pretty old.
2. Installing CWM Recovery
Okie, since you are now rooted, most likely you would require a custom recovery to create full nandroid backups or test different ROMs. The CWM recovery provided here was created using MTKDroid Tools and is version 5.x (Non Touch). Again all credit goes to the developer of MTKDroid Tools for making such a powerful piece of software.
a) Download and extract the recovery package.
Link to CWM 5.x and Original Recovery for A55 HD
b) There are two files in the package , one is the custom CWM recovery and the other one is Stock Recovery (Names are pretty self understood)
c) Copy "Custom_Recovery_CWM_A55HD.img" to the root of your SD card
d) Rename it to "recovery.img"
e) Install Mobile Uncle Tools [MUT] from the playstore.
f) Open MUT and go to recovery update
g) Now you must see the recovery.img in a list. Just select it and follow the pop ups.
h) Now your phone would restart.
i) To check if the recovery update was successful, go to MUT and select "Reboot into Recovery" and your phone would most likely start in CWM recovery..
Alternative to get into recovery mode is to Press Power button + Volume Down key together when switched off.
3. Stock ROM for Videocon A55 HD
Okie, here we go, as I mentioned that I had got hold of the stock rom, so here I'm publishing it. The credit goes to Pratap Solunke (psolunke) for providing the Factory ROM zip.
I have just divided it into update.zip and files for SPFT for ease of downloading. Besides I have splitted each section into 4 parts and reuploaded it so you can download them at your ease. I'm providing the link for the whole folder which includes the changelog, update.zip and files for SPFT.
The ROM version is V7 (2013.07.15) which is different from the original ROM which was V5 (2013.06.08).
You can read the changelog for the updates in this ROM.
Link to ROM Folder
If using update.zip to flash this ROM, then
Step 1. Open the update.zip with winrar, Do not extract.
Step 2. Navigate to \META-INF\com\google\android\updater-script and extract this file only, then use "Notepad++" to open the file.Don't use default notepad.
Step 3. Delete assert(getprop("ro.product.device") == "A55HD" || getprop("ro.build.product") == "A55HD");
Step 4. Save the file, put it back to the same location in archive (It will take some time to add to archive)..Done...then proceed as usual.
a) update.zip is for reinstalling Factory Image of the ROM from recovery mode. The zip file is signed.
b) Files for SPFT are to be used with SP Flash Tool and can be used in case your phone is bricked. Do not flash the preloader unless you know what you are doing.
c) To download the files just go to the respective folder and right click on each file and hit download. After all four parts are downloaded, extract Part 1 of the downloaded splitted files and the files would be ready to be used as is.
d) Keep all four parts of the splitted files in a single folder and do not rename the splitted files.
If you have any questions related to A55 HD you can ask them here and I would try to help you the best way I can.
I'm still testing some custom ROMS but none seem to work . So far I've tested LEWA OS and MIUI ROM for xiacoao G6 Youth. However I'll keep trying and update once I have a working Custom ROM.
One more project in mind is to port Custom ROMS to A55 HD if none is available as is on the web.
If anyone of you is able to find a working Custom ROM for A55 HD kindly post it here so that we can have a repository of successful and useless attempts. I'm sure it would help others.

Rooting procedure worked after two attempts. The device is rooted.
While trying to install CWM recovery, get a problem. Can not see custom recovery in MUT. Pasted on both SD cards, internal and external also.
---------- Post added at 01:35 PM ---------- Previous post was at 01:34 PM ----------
Rooting procedure worked after two attempts. The device is rooted.
While trying to install CWM recovery, get a problem. Can not see custom recovery in MUT. Pasted on both SD cards, internal and external also. All the recoveries shown in the list are only remote recoveries

nanachitang420 said:
Rooting procedure worked after two attempts. The device is rooted.
While trying to install CWM recovery, get a problem. Can not see custom recovery in MUT. Pasted on both SD cards, internal and external also.
---------- Post added at 01:35 PM ---------- Previous post was at 01:34 PM ----------
Rooting procedure worked after two attempts. The device is rooted.
While trying to install CWM recovery, get a problem. Can not see custom recovery in MUT. Pasted on both SD cards, internal and external also. All the recoveries shown in the list are only remote recoveries
Click to expand...
Click to collapse
I forgot to mention , rename the recovery image to "recovery.img" and then put it in root of SD card and it would get detected by MUT...It will get detected instantly...Thankyou for bringing it to notice...Just updating the post...

done but some observations!!!!
DONE.
Some observations:
1. In CWM, cant see internal SD card. While, after mounting usb storage, can see external SD card only. NOTE, CANT SEE INTERNAL SD CARD ONLY WHEN TRY TO MOUNT INTERNAL PHONE STORAGE IN CWM. WHILE NORMAL WORKING NO PROBLEM.
2. Deleted.
3. Deleted.
4. Deleted,
5. Deleted.
6. The font size of Stock and CWM recovery is very small still it can serve the purpose.
Do any body have original/stock update.zip from Company?
Updates:
I think I figured out the problem with touch. Uninstalled an application called "Go Power Master" and the touch is ok even after connecting USB or charger. Thanks man. The phone is working very nice after rooting.

nanachitang420 said:
DONE.
Some observations:
1. In CWM, cant see internal SD card. While, after mounting usb storage, can see external SD card only.
2. After rooting, before even installing CWM, got some irratic behavior with touch. Like, while USB is connected, touch was not working as expected, it took long time to make USB storage active as after touching a specific required operation, like pulling down task bar it was doing something else like opening play store, opening game, or opening date and time settings. While unlocking lock screen, it was just opening any random phone application and is not even allowing to go back with back button or home button. Don't know this is related with what?
3. Irratic application were opening while touching different application but after removing USB, things were working better.
4. Rebooted in CWM and first tried to "fix permissions" to avoid that irratic touch behavior, thinking there was problem with permissions. Took nandroid back up, after fixing permissions. Wiped cache and dalvik cache and restarted.
5. Now, till now phone is not connected to PC with USB cable or connected to charging; it behaves better with touch but it is very troublesome to perform any operation after phone connected to PC with USB or to charger.
May be you have faced these issues or may not! Any suggested solution? Do any body have original/stock update.zip from Videocon?
Updates:
I think I figured out the problem with touch. Uninstalled an application called "Go Power Master" and the touch is ok even after connecting USB or charger. Thanks man.
Click to expand...
Click to collapse
For me the touch works without any problems...and as for detecting internal sd card...that also works flawlessly..i don't have the phone with me right now...Yesterday I was trying something and the nvram got corrupted [No baseband]...so right now it is resting at service center...Hope to get it next week...
One suggestion never install Carliv Touch Recovery on this phone...it messes with the baseband and display...Stick to this recovery until I build a more updated CWM...

Latest V-Store attached
Attached

nanachitang420 said:
Attached
Click to expand...
Click to collapse
Nice...let's make this thread a repository of A55 HD..And I have also got hold of the original update.zip and files for SPFT ...Will split them and upload to my google drive...and then share them..

update.zip
Aaaaanuj1 said:
Nice...let's make this thread a repository of A55 HD..And I have also got hold of the original update.zip and files for SPFT ...Will split them and upload to my google drive...and then share them..
Click to expand...
Click to collapse
The current version of my phone is 08062013. Can I flash this latest version through CWM and upgrade?

Tried to flash update.zip through CWM...
Installing: /sdcard/update.zip
Finding update package...
Opening update package....
Installing update....
assert failed: getprop("ro.product.device")=="A55HD" || getprop("ro.build.product")=="A55HD".
E: Error in /sdcard/update.zip
(Status 7)
Installation aborted...
Restored nandroid backup after this.

nanachitang420 said:
Installing: /sdcard/update.zip
Finding update package...
Opening update package....
Installing update....
assert failed: getprop("ro.product.device")=="A55HD" || getprop("ro.build.product")=="A55HD".
E: Error in /sdcard/update.zip
(Status 7)
Installation aborted...
Restored nandroid backup after this.
Click to expand...
Click to collapse
Okie it is an easy fix...
Step 1.Open the update.zip with winrar, Do not extract.
Step 2.Navigate to \META-INF\com\google\android\updater-script ,use "Notepad++" to open the file.Don't use default notepad.
Step 3.delete assert(getprop("ro.product.device") == "A55HD" ||
getprop("ro.build.product") == "A55HD");
Step 4.Save the file, update to archive..Done

Done
Successful.
Please add in above step 2 "to extract file Updater-script on PC" and then use N.........
Flashed modified update.zip from CWM and phone upgraded to version 15072013. To be strange it is showing v1.0 20130715 in build ie in about phone. All the applications were intact but lost root and also CWM recovery; then managed to root the phone and flash CWM with your fantastic guide.
After booting in CWM, wiped cache and dalvik cache(why? don't know). Phone is working nice. Thanks,

nanachitang420 said:
Successful.
Please add in above step 2 "to extract file Updater-script on PC" and then use N.........
Flashed modified update.zip from CWM and phone upgraded to version 15072013. To be strange it is showing v1.0 20130715 in build ie in about phone. All the applications were intact but lost root and also CWM recovery; then managed to root the phone and flash CWM with your fantastic guide.
After booting in CWM, wiped cache and dalvik cache(why? don't know). Phone is working nice. Thanks,
Click to expand...
Click to collapse
Nice...Yeah, people at Videocon forgot to change the version number i guess...and loss of root and cwm was due to restoring of system.img and recovery.img in the ROM file...so it's normal..
Besides one should always perform a clean install from CWM..i.e. Clear Data, Clear Cache, Clear Dalvik Cache, Format /system/ and then install ROMS..
And yes this ROM is a bit better then the one on phone..I received my phone today from service center and software was updated to this ROM..It felt much better .And the version was same , so this seems to be the latest ROM for A55 HD.. Enjoy

How to flash phone with sp flash tools
was trying to flash a recovery build on CWM site. I think it has spoiled baseband. No sim is getting detected. Any idea how to flash phone with SP tool? Don't have access to service station as am very far.
Edit: Managed to flash with SP tool. Used the files you have uploaded for SPFT. Selected all options and now phone is on and showing base band version, also sim are getting detected. The issue was preloader drivers for windows 8 which managed to install by disabling driver signature verification. Device rooted and installation of CWM through MUT was successful. Thanks.
Try this and this. Its as good as custom rom installation works very well with MTK6589

nanachitang420 said:
was trying to flash a recovery build on CWM site. I think it has spoiled baseband. No sim is getting detected. Any idea how to flash phone with SP tool? Don't have access to service station as am very far.
Edit: Managed to flash with SP tool. Used the files you have uploaded for SPFT. Selected all options and now phone is on and showing base band version, also sim are getting detected. The issue was preloader drivers for windows 8 which managed to install by disabling driver signature verification. Device rooted and installation of CWM through MUT was successful. Thanks.
Try this and this. Its as good as custom rom installation works very well with MTK6589
Click to expand...
Click to collapse
You must understand that the recovery partition is of 6 mb....and most likely the recovery you received from CWM online builder was more than 6 mb..hence your secro.img was also overwritten...hence the problems with baseband and imei....same thing happened with me 7 days back when I had to submit my phone to Service center. Unfortunately i didn't had the flash image then but it is good to know that it can also recover baseband and imei. And congrats for recovering your phone and I'm glad my contribution helps you...
Just remember one thing...if the boot, recovery,secro partitions are of more than 6mb then don't flash them as they would mess one thing or other...and hopefully you had disabled preloader in SPFT.....if not then from next time onwards please do it....because rarely you need to flash preloader...and a wrong flash can make your device a brick which can only be recovered by Test points.Hence never flash preloader until unless you know what you are doing.....And yes, I already use Gravity Box along with Xposed Framework...Great mod...Besides them I also use xhalofloatingwindow with bubble launcher and lwinrecent ...Both are xposed modules and work as expected.I also have init.d support which allows to make boot persistent changes on device....Along with that a few build.prop tweaks that take my ROM to the custom level...Let me know if you need any of this...

Please
Thanks for preloader advise. was not that much aware and will take care next time. Please share init.d support, build.prop tweaks and their usefulness.

For init.d, use term-init by ryuinferno.
http://forum.xda-developers.com/showthread.php?t=1933849
This is the link to the thread. Do not use zip-init or uni-init. Follow the guide on the thread. It works flawlessly.
Sent from my A55HD using Tapatalk

Which other phones has MTK6589 and same config ?
Tell me model number and brand, i will try to upload stock firmware.
it will help us built custom rom with custom features.
@anuj - Anyways if it brick again and need to send service center, please text me imei and location, i will make it done fast for you dear.:fingers-crossed:

Thank you Pratap bro. I'll let you know next time if I get to the point where I need to go to service center but I'm sure that with the ROM you provided I wouldn't need to go to one. And yes people you can ask for stock ROM from Pratap. He has excellent connections and can get you at least the Videocon ROM and may be others . Don't forget to thank him. Besides he is an excellent person who wouldn't shy away from helping you if he can. Ciao Pratap brother.
Sent from my A55HD using Tapatalk

Any new updates from Videocon for our A55HD?

File not found
File not found bro

custom rom for alcatel 4010x

Custom Rom for Alcatel T’POP
Custom Rom for Alcatel Onetouch (OT) T’pop
Custom Rom for Alcatel T’pop have been very elusive. Searching it online can be very frustrating but you don’t have to worry any more. This rom is Cynogenmod (Xperia Z) rom modded to work with Alcatel Onetouch (OT) T’Pop (4010A, 4010X, 4010D, 4010E) also known in some regions as Alcatel Glory 2S. This Custom Rom has been modded to use m2sd which increases alcatel t’pop internal memory by using the sd card to store Apps.
I wrote this article to guide you through the installation methods, but first you have to have your phone rooted and CWM recovery installed.
How to Root Alcatel (OT) T’pop
To root your Alcatel T’pop you must have a pc running Windows. Since Window does not have Alcatel drivers, download them from here.. After download execute the file and reboot your pc if necessary.
The next step is to install Ishuaji root. download from this link
The next step is to turn ON the USB debugging option on your device opening Menu > Settings > Applications > Development > USB debugging.
Open Ishuaji.
Plug in your device to your PC using the USB cable.
5. Now hit that little green button which appears in the bottom-right corner of the app.
6. It should start rooting your device.
7. You should now be rooted! Excellent! Your device’s been successfully rooted and you’re all set to enjoy the customization of your android.
Installing CWM
Download Cwm from here (link below)
Extract the archive which contains two files (mobile uncle tools.apk and recovery.img) . Install mobile uncle and make sure to move recovery.img to the root of your sd card.
open the mobile uncle application and grant it superuser permissions. Just press the left option (that is the “allow button”.
Click continue then choose “flash recovery from sd card”. Choose recovery.img. Well-done you now have cwm 5 installed on your phone.
Removing Chinese Super User
Download Super User (google for it/playstore/or use the forum)
Switch off your phone.
Press the volume up button and the power on button until the phone enters recovery mode.
Select “Install Zip From Sd Card” option and go to the downloaded super user.zip. Thats All.
INSTALLING XPERIA Z MOD FOR ALCATEL T’POP
Now that you have a rooted phone and CWM recovery installed lets play with custom roms. To install a custom rom is simple but sometime things can go wrong. First you have to save your current rom. Switch off your phone and Press the Volume Up and Power button to enter recover mode. Select Backup and Restore, then Backup and wait for CWM to backup your current ROM which can be used to restore your phone to an earlier state.
Download the Xperia Z custom rom for Alcatel T’pop from here(link below)
Extract the RAR archive which contains XPERIA ROM MOD BY VIKTOR DOMINGUEZ.zip and a Folder named RESTORE containing other files. Create a Folder with the name clockworkmod in root of your sd card if its not yet available. Open the folder and create another named backup.
Copy the Restore folder you extracted to clockworkmod>backup.
Copy XPERIA ROM MOD BY VIKTOR DOMINGUEZ.zip to the root of your sd card, do not extract the zip file.
Installation
Switch off your phone.
Press volume up and power buttons at the same time until you enter recovery mode.
Do the following first -Wipe data/factory reset -Wipe cache partition if any
Select the option INSTALL ZIP FROM SDCARD. Select XPERIA ROM MOD BY VIKTOR DOMINGUEZ.zip.
Install the zip
When complete select go back until you find the option BACKUP AND RESTORE.
Select Restore and select Restore/ .Wait until the operation is complete and reboot your system.
THATS ALL. ENJOY YOUR CUSTOM ANDROID. (STAY TUNED FOR OTHER CUSTOM ROMS)
HERE IS ANOTHER CUSTOM ROM I UPLOADED FOR ALCATEL T’POP(4010A, 4010X, 4010D, 4010E ). THIS MOD CAN BE USED AS STOCK ROM.
The installation is the same as shown above
download mutacion.zip from here(link below)
save the zip in root of sd card.
download Restaurar folder from here (link below)
copy/move it to /clockworkmod>backup
reboot your phone to recovery mode and wipe ALL cache , Wipe data/factory reset .
the next step is to install mutacion.zip. procedure is shown above.
still in recovery mode, go to backup and restore and restore your device with the files you downloaded shown as /Restaurar
reboot your device and enjoy.

Someone please confirm if this thing works

Its
bumjrah said:
Someone please confirm if this thing works
Click to expand...
Click to collapse
Check out.
http : // ngashsk.blogspot.com/p/alcatel (dot) html

Av tried it but its not working well with 4010D as only one simcard being detected

Link Below?
loxdon said:
Custom Rom for Alcatel T’POP
Custom Rom for Alcatel Onetouch (OT) T’pop
Custom Rom for Alcatel T’pop have been very elusive. Searching it online can be very frustrating but you don’t have to worry any more. This rom is Cynogenmod (Xperia Z) rom modded to work with Alcatel Onetouch (OT) T’Pop (4010A, 4010X, 4010D, 4010E) also known in some regions as Alcatel Glory 2S. This Custom Rom has been modded to use m2sd which increases alcatel t’pop internal memory by using the sd card to store Apps.
I wrote this article to guide you through the installation methods, but first you have to have your phone rooted and CWM recovery installed.
How to Root Alcatel (OT) T’pop
To root your Alcatel T’pop you must have a pc running Windows. Since Window does not have Alcatel drivers, download them from here.. After download execute the file and reboot your pc if necessary.
The next step is to install Ishuaji root. download from this link
The next step is to turn ON the USB debugging option on your device opening Menu > Settings > Applications > Development > USB debugging.
Open Ishuaji.
Plug in your device to your PC using the USB cable.
5. Now hit that little green button which appears in the bottom-right corner of the app.
6. It should start rooting your device.
7. You should now be rooted! Excellent! Your device’s been successfully rooted and you’re all set to enjoy the customization of your android.
Installing CWM
Download Cwm from here (link below)
Extract the archive which contains two files (mobile uncle tools.apk and recovery.img) . Install mobile uncle and make sure to move recovery.img to the root of your sd card.
open the mobile uncle application and grant it superuser permissions. Just press the left option (that is the “allow button”.
Click continue then choose “flash recovery from sd card”. Choose recovery.img. Well-done you now have cwm 5 installed on your phone.
Removing Chinese Super User
Download Super User (google for it/playstore/or use the forum)
Switch off your phone.
Press the volume up button and the power on button until the phone enters recovery mode.
Select “Install Zip From Sd Card” option and go to the downloaded super user.zip. Thats All.
INSTALLING XPERIA Z MOD FOR ALCATEL T’POP
Now that you have a rooted phone and CWM recovery installed lets play with custom roms. To install a custom rom is simple but sometime things can go wrong. First you have to save your current rom. Switch off your phone and Press the Volume Up and Power button to enter recover mode. Select Backup and Restore, then Backup and wait for CWM to backup your current ROM which can be used to restore your phone to an earlier state.
Download the Xperia Z custom rom for Alcatel T’pop from here(link below)
Extract the RAR archive which contains XPERIA ROM MOD BY VIKTOR DOMINGUEZ.zip and a Folder named RESTORE containing other files. Create a Folder with the name clockworkmod in root of your sd card if its not yet available. Open the folder and create another named backup.
Copy the Restore folder you extracted to clockworkmod>backup.
Copy XPERIA ROM MOD BY VIKTOR DOMINGUEZ.zip to the root of your sd card, do not extract the zip file.
Installation
Switch off your phone.
Press volume up and power buttons at the same time until you enter recovery mode.
Do the following first -Wipe data/factory reset -Wipe cache partition if any
Select the option INSTALL ZIP FROM SDCARD. Select XPERIA ROM MOD BY VIKTOR DOMINGUEZ.zip.
Install the zip
When complete select go back until you find the option BACKUP AND RESTORE.
Select Restore and select Restore/ .Wait until the operation is complete and reboot your system.
THATS ALL. ENJOY YOUR CUSTOM ANDROID. (STAY TUNED FOR OTHER CUSTOM ROMS)
HERE IS ANOTHER CUSTOM ROM I UPLOADED FOR ALCATEL T’POP(4010A, 4010X, 4010D, 4010E ). THIS MOD CAN BE USED AS STOCK ROM.
The installation is the same as shown above
download mutacion.zip from here(link below)
save the zip in root of sd card.
download Restaurar folder from here (link below)
copy/move it to /clockworkmod>backup
reboot your phone to recovery mode and wipe ALL cache , Wipe data/factory reset .
the next step is to install mutacion.zip. procedure is shown above.
still in recovery mode, go to backup and restore and restore your device with the files you downloaded shown as /Restaurar
reboot your device and enjoy.
Click to expand...
Click to collapse
Can anyone verify if the files dowload links are removed, or it´s just me that I don´t find them?

1
:22

working for sure
just visit mutaanto(dot)wordpress(dot)com....u will find the zerostorm rom for alcatel 4010x..working perfectly

http://www.mediafire.com/download/djg7n8ukahdac45/Custom_Gingerx_katv2_by_DrunkenLizard.rar
Rom for the 4010X not D, X!!
Normal flashing instructions, full wipes, install, flash enclosed CWM backup, flash a few zips..etc... included in the readme file. Not my rom, found it here: http://www.youtube.com/watch?v=Kere5VobLC0 and not my phone, so risked it. Works great and better than the xperia rom and stock anyway. Still need root uninstaller as bloat even on this one. After bloatware removal, there is maybe 130meg left ish, in system memory...

robneymcplum said:
http://www.mediafire.com/download/djg7n8ukahdac45/Custom_Gingerx_katv2_by_DrunkenLizard.rar
Rom for the 4010X not D, X!!
Normal flashing instructions, full wipes, install, flash enclosed CWM backup, flash a few zips..etc... included in the readme file. Not my rom, found it here: http://www.youtube.com/watch?v=Kere5VobLC0 and not my phone, so risked it. Works great and better than the xperia rom and stock anyway. Still need root uninstaller as bloat even on this one. After bloatware removal, there is maybe 130meg left ish, in system memory...
Click to expand...
Click to collapse
I need some help.
Did you had clockworkmod installed on the phone? If so, how did you installed it? Since the recovery.img way didn't work for me...The phone restarted, but no cwm at all...
Or you installed it without cwm?
Thanks in advance!

wex28 said:
I need some help.
Did you had clockworkmod installed on the phone? If so, how did you installed it? Since the recovery.img way didn't work for me...The phone restarted, but no cwm at all...
Or you installed it without cwm?
Thanks in advance!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2320583

alcatel one touch 4010x
hi guy i am trying to flash recovery into my alcatel one touch 4010x using sp flash tool now i tells me that my phone does not have a bootloader..
the phone wont boot to recovery..
it says download bootloader..
does anyone have a fix for this?
help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

worked for me.
loxdon said:
Custom Rom for Alcatel T’POP
Custom Rom for Alcatel Onetouch (OT) T’pop
Custom Rom for Alcatel T’pop have been very elusive. Searching it online can be very frustrating but you don’t have to worry any more. This rom is Cynogenmod (Xperia Z) rom modded to work with Alcatel Onetouch (OT) T’Pop (4010A, 4010X, 4010D, 4010E) also known in some regions as Alcatel Glory 2S. This Custom Rom has been modded to use m2sd which increases alcatel t’pop internal memory by using the sd card to store Apps.
I wrote this article to guide you through the installation methods, but first you have to have your phone rooted and CWM recovery installed.
How to Root Alcatel (OT) T’pop
To root your Alcatel T’pop you must have a pc running Windows. Since Window does not have Alcatel drivers, download them from here.. After download execute the file and reboot your pc if necessary.
The next step is to install Ishuaji root. download from this link
The next step is to turn ON the USB debugging option on your device opening Menu > Settings > Applications > Development > USB debugging.
Open Ishuaji.
Plug in your device to your PC using the USB cable.
5. Now hit that little green button which appears in the bottom-right corner of the app.
6. It should start rooting your device.
7. You should now be rooted! Excellent! Your device’s been successfully rooted and you’re all set to enjoy the customization of your android.
Installing CWM
Download Cwm from here (link below)
Extract the archive which contains two files (mobile uncle tools.apk and recovery.img) . Install mobile uncle and make sure to move recovery.img to the root of your sd card.
open the mobile uncle application and grant it superuser permissions. Just press the left option (that is the “allow button”.
Click continue then choose “flash recovery from sd card”. Choose recovery.img. Well-done you now have cwm 5 installed on your phone.
Removing Chinese Super User
Download Super User (google for it/playstore/or use the forum)
Switch off your phone.
Press the volume up button and the power on button until the phone enters recovery mode.
Select “Install Zip From Sd Card” option and go to the downloaded super user.zip. Thats All.
INSTALLING XPERIA Z MOD FOR ALCATEL T’POP
Now that you have a rooted phone and CWM recovery installed lets play with custom roms. To install a custom rom is simple but sometime things can go wrong. First you have to save your current rom. Switch off your phone and Press the Volume Up and Power button to enter recover mode. Select Backup and Restore, then Backup and wait for CWM to backup your current ROM which can be used to restore your phone to an earlier state.
Download the Xperia Z custom rom for Alcatel T’pop from here(link below)
Extract the RAR archive which contains XPERIA ROM MOD BY VIKTOR DOMINGUEZ.zip and a Folder named RESTORE containing other files. Create a Folder with the name clockworkmod in root of your sd card if its not yet available. Open the folder and create another named backup.
Copy the Restore folder you extracted to clockworkmod>backup.
Copy XPERIA ROM MOD BY VIKTOR DOMINGUEZ.zip to the root of your sd card, do not extract the zip file.
Installation
Switch off your phone.
Press volume up and power buttons at the same time until you enter recovery mode.
Do the following first -Wipe data/factory reset -Wipe cache partition if any
Select the option INSTALL ZIP FROM SDCARD. Select XPERIA ROM MOD BY VIKTOR DOMINGUEZ.zip.
Install the zip
When complete select go back until you find the option BACKUP AND RESTORE.
Select Restore and select Restore/ .Wait until the operation is complete and reboot your system.
THATS ALL. ENJOY YOUR CUSTOM ANDROID. (STAY TUNED FOR OTHER CUSTOM ROMS)
HERE IS ANOTHER CUSTOM ROM I UPLOADED FOR ALCATEL T’POP(4010A, 4010X, 4010D, 4010E ). THIS MOD CAN BE USED AS STOCK ROM.
The installation is the same as shown above
download mutacion.zip from here(link below)
save the zip in root of sd card.
download Restaurar folder from here (link below)
copy/move it to /clockworkmod>backup
reboot your phone to recovery mode and wipe ALL cache , Wipe data/factory reset .
the next step is to install mutacion.zip. procedure is shown above.
still in recovery mode, go to backup and restore and restore your device with the files you downloaded shown as /Restaurar
reboot your device and enjoy.
Click to expand...
Click to collapse
thanks for the guide xda z the oñly place to be

kakalex said:
Av tried it but its not working well with 4010D as only one simcard being detected
Click to expand...
Click to collapse
So how did you solve the dual SIM issue?
Sent from my C2305 using XDA Free mobile app

DO NOT EVER TRY TO USE THIS FOR 4010D model. SECOND SIM UTILITY IS GONNA GET LOST!!

Can anyone please give me original rom backup for 4010D. My rom is crashed and I am not able to boot it. And PC also not detecting the device (May be problem with Drivers). I didn't took bakup, can you give ??

Hey guys, I'm trying to root this Alcatel 4010X and I'm following the instructions.
I installed the usb drivers to my laptop, installed ishuaji_root.exe an ran it..... Followed all the instructions and now my phone has restarted but has a lot of chinese writing - different apps etc, even though the phone language is still UK
I'm struggling with the next bit about installing CWM - I've installed it to my laptop via this https://www.xda-developers.com/how-to-install-clockworkmod/ link,but I'm unsure what I need to do now....

Does anyone know the newest version of android that will work on this handset?

itnorfolk said:
Does anyone know the newest version of android that will work on this handset?
Click to expand...
Click to collapse
There is no newer version. Only skinned versions of those newer ROMs.

[QMobile i9][KitKat 4.4.2] Installation + Root + Custom KitKat

Disclaimer: Flash at your own risk, I added tutorial so if something gone wrong to your phone, don't blame me.
Click to expand...
Click to collapse
New QMobile i9 Users
Click to expand...
Click to collapse
Click Here First
IMEI / NVRAM Backup
Click to expand...
Click to collapse
​
Method 1:
Before Installing the KitKat Follow These Steps.
1. Download MTK Droid Tool From Here
2. i9 must be rooted and USB debugging must be enabled before you proceed.
3. Attach the cell phone with data cable and run mtk droid tool as admin.
4. When device got loaded press the root button and grant root access on cell phone.
5. Click on IMEI/NVRAM button and click on backup.
6. Now in case after flashing u lost IMEI follow the same steps but now click on restore.
Method 2 (In Case No IMEI Backup):
1.Be patient and it will fix your imei
2.Download the IMEI_WINDOWS.zip from here
3.Extract the contents to C:\Users\Username (Current User)
4.Open command promp and cd to the IMEI_WINDOWS folder
5.Now type "imei.exe 123456789111111 123456789111111" without quotes
6.Just replace both the 15 digit numbers with your IMEI 1 and IMEI 2 respectively
7.Now a file named "MP0B_001_NEW" will be generated in your IMEI_WINDOWS folder
8.Just rename it to "MP0B_001"
9.Now download the IMEI_FLASHABE.zip from here
10.Extract this zip and go to "/data/nvram/md/NVRAM/NVD_IMEI/"
11.Delete the placehere file and paste your "MP0B_001" file here
12.Now zip the META-INF and data folder and flash it with recovery
13.You have to flash this after you see imei error on your 1st boot
14.Don't flash directly after the ROM, just do your first boot then flash it.
Method 3 (In Case No IMEI Backup):
1.Download IMEI Repair Tool
2.Download Support Files
3.Instructions To Follow
QMobile KitKat Release
Click to expand...
Click to collapse
​
Before you update Back Up your current rom using custom recovery in case you want to revert back
Try t0 use stable window 7 and a laptop with full battery.
Video Tutorial (Not in English just watch the video and follow)
Smart Phone Flash Tool and Driver
Firmware Download
1. First of all download the required files.
2. Install Tinno Driver.
3. Extract All Zips.
4. Run the Flashing Tool as admin (Right Click on the file and click on run as admin)
5. Download Scatter File From Attachments And Add It In Firmware Folder Now Load It, all files will be loaded now click on the address bar in front of recovery and select the recovery attached below.
6. Select Firmware Upgrade.
7. Power off the cell phone and remove battery.
8. Now click on download and attach the cell phone without battery to data cable.
9. Wait till flash. You are done. :laugh:
10. Enjoy Official Noir i9 KitKat.
Rooting Method​
Click to expand...
Click to collapse
1. Just Install The Attached Zip named "4.4 Root.zip" or "subbinst-signed.zip" Via Recovery.
MyPhone KitKat Release
Click to expand...
Click to collapse
​
Before you update Back Up your current rom using custom recovery in case you want to revert back
Try t0 use stable window 7 and a laptop with full battery.
Trust yourself you can do it!. :laugh:
Video Tutorial (Not in English just watch the video and follow)
Smart Phone Flash Tool and Driver
Firmware Download
1. First of all download the required files.
2. Install Tinno Driver.
3. Extract All Zips.
4. Run the Flashing Tool as admin (Right Click on the file and click on run as admin)
5. Select Scatter Loader from the firmware, all files will be loaded now click on the address bar in front of recovery and select the recovery attached below.
6. Select Firmware Upgrade.
7. Power off the cell phone and remove battery.
8. Now click on download and attach the cell phone without battery to data cable.
9. Wait till flash. You are done. :laugh:
10. Enjoy KitKat.
Rooting Method​
Click to expand...
Click to collapse
1. Just Install The Attached Zip named "4.4 Root.zip" Via Recovery.
MMX KitKat Release
Click to expand...
Click to collapse
Video Tutorial
1. Official KitKat Download
2. Smart Phone Flash Tool and Tinno Driver Download
3. Download the recovery file attached below.
4. Install Tinno Driver.
5. Extract All Zips.
6. Run the Flashing Tool as admin (Right Click on the file and click on run as admin)
7. Select Scatter Loader from the firmware, all files will be loaded now click on the address bar in front of recovery and select the recovery attached below.
8. Select Firmware Upgrade.
9. Power off the cell phone and remove battery.
10. Now click on download and attach the cell phone without battery to data cable.
11. Wait till flash. You are done.
12. Enjoy Offical KitKat.
Rooting Method​
Click to expand...
Click to collapse
1. Just Install The Attached Zip named "subbinst-signed.zip" Via Recovery.
Custom ROM "Classic Kat" by Me
Click to expand...
Click to collapse
​
Click Here
Custom Rom Based On MMX
Click to expand...
Click to collapse
​
Custom Rom v3
1.Place ROM Zip File in your sdcard
2.Wipe data/factory reset
3.Wipe dalvik cache
4.Flash ROM from sdcard
5.Flash subbinst-signed.zip from attachment to get root access.
6.Enjoy a Proper and Stable KitKat
7.Download and Flash FILE_MANAGER.zip to remove error in the File Manager. :good:
8.If no engineering mode in your cell phone then download engineermode.apk and copy/paste in system app via Root Explorer
Increase App Storage
Click to expand...
Click to collapse
Use it only on MMX KitKat Release and on Custom ROM based on MMX. Not with MyPhone KitKat Release.
Step 1: Download "Internal APP storage (4GB MMXKK).zip" from bellow
Step 2: Extract the file
Step 3: Open SP Flash tools
Step 4: Add scatter file
Step 5:Select EBR1 and EBR2
Step 6: Click on Download
Step 7:Remove the battery from your Canvas 2 colors
Step 8:Connect your phone to pc via data cable
Step 9:wait for the completion of Flashing Process
Step 10:Reboot your Phone
Step 11ull down Notification panel and tap on the msg "Damaged Internal SD card"
Step 12: Tap on Format ...
Now Enjoy 2.1 GB app storage with 410MB Mass storage....
Revert Back To JellyBean i9 Official
Click to expand...
Click to collapse
Video Tutorial (Not in English just watch the video and follow)
Smart Phone Flash Tool and Driver
Firmware Download
1. First of all download the required files.
2. Install Tinno Driver.
3. Extract All Zips. 1 file is missing in the firmware zip which is attached below named secro.img, add it in the firmware folder before proceed.
4. Run the Flashing Tool as admin (Right Click on the file and click on run as admin)
5. Select Scatter Loader from the firmware, wait till all files to load.
6. Select Firmware Upgrade.
7. Power off the cell phone and remove battery.
8. Now click on download and attach the cell phone without battery to data cable.
9. Wait till flash. You are done. :laugh:
10. Enjoy Stock JellyBean.
Add-ons
Click to expand...
Click to collapse
Click Here
Plese Hit thanks button if I helped you!
Click to expand...
Click to collapse
Frequently Asked Question (FAQ)
Click to expand...
Click to collapse
1. After I upgrade into kitkat firmware, can I downgrade again to Jellybean?
-Just flash dump rom of jellybean using spft.
2. I back up in CWM, Can I restore this in Kitkat version?
-No!
3.May I ask if we have custom recovery available for our kitkat version?
-Yes CTR
Credits
INCPAK
Biswajyoti
CallMeX!!
umangleekha​

More Custom KitKat ROMs
You Must Be On KitKat To Flash These ROMs
Click to expand...
Click to collapse
ROM Links JellyBean 4.2​
Click to expand...
Click to collapse
1. Huawei Honor 3C
2. Galaxy s5
ROM Links KitKat 4.4​
Click to expand...
Click to collapse
1. KitKat Fresh v3 (4.4.2)
2. KitKat Emotion UI (4.4.2)
3. SlimKat Themed KitKat (4.4.4)
4. AOSP KitKat ROW (4.4.2)
5. Lenovo KitKat (4.4.2)
6. Android L Themed ROM
Procedure of Installation​
Click to expand...
Click to collapse
1.Place Any ROM Zip File in your sdcard.
2.Wipe data/factory reset.
3.Wipe dalvik cache.
4.Flash ROM from sdcard.
5.Flash 4.4 Root.zip from attachment to get root access.
6.Enjoy.
Add-ons
Click to expand...
Click to collapse
Click Here
Note: Replace the boot.img in Fresh v3 to use Memory Card as default.
Click to expand...
Click to collapse
Credits
4pda.ru​

Have you tried using titanium backup, go backup or lucky patcher after root genius because when i earlier flashed kitkat these apps weren't working and i had to revert back to jelly bean.
Edit: Thanks brother, all these apps are working after root genius. You've solved a big problem for me.

Add-ons
Add-ons
Click to expand...
Click to collapse
1.Best Keyboard In Town.
2a.Best Music Player In Town
2b.Music Player Add-on Patch
3.Best Camera App In Town
4.QMobile Stock Logo i9
5.Battery & Performance Patch
Procedure
Click to expand...
Click to collapse
1.Place Zip File in your SDCard.
2.Reboot Into Recovery.
3.Flash zip from sdcard.
4.Enjoy.

root genius failed.....when I flash CWM recovery it says PMT changed for rom

I alreay told in the post that flash the recovery with the ROM by replacing the included recovery

sorry my bad...tnks 4 reply

Always welcome

If you want to ask any question please ask on this forum only. Thanks

New i9 users must check this link
http://forum.xda-developers.com/showthread.php?t=2836748

Screen shots
qwerfaseeh said:
Before Installing the Official KitKat Follow These Steps.
1. Download MTK Droid Tool From Here
2. i9 must be rooted and USB debugging must be enabled before you proceed.
3. Attach the cell phone with data cable and run mtk droid tool as admin.
4. When device got loaded press the root button and grant root access on cell phone.
5. Click on IMEI/NVRAM button and click on backup.
6. Now in case after flashing u lost IMEI follow the same steps but now click on restore.
7. IMEI backup is a must thing.
8. Enjoy Official Release.
[/B]
Video Tutorial
1. Official KitKat Download
2. Smart Phone Flash Tool and Tinno Driver Download
3. Download the recovery file attached below.
4. Install Tinno Driver.
5. Extract All Zips.
6. Run the Flashing Tool as admin (Right Click on the file and click on run as admin)
7. Select Scatter Loader from the firmware, all files will be loaded now click on the address bar in front of recovery and select the recovery attached below.
8. Select Firmware Upgrade.
9. Power off the cell phone and remove battery.
10. Now click on download and attach the cell phone without battery to data cable.
11. Wait till flash. You are done.
12. Enjoy Offical KitKat.
1. Just Install PDA.Net+ Driver
2. Use the Genuine Root method.
3. No need to install the root.zip first
4. Just attach cell phone and run genuine root and click on Root button.​
Click to expand...
Click to collapse
provide screen shots of whole phone​

Root method has been updated, and a new custom ROM named CleanKat is added in the thread, check the first and 2nd post for the easiest and most proper working root.

Mustafa Chaudhry said:
provide screen shots of whole phone
Click to expand...
Click to collapse
added now check the 2nd post

qwerfaseeh said:
added now check the 2nd post
Click to expand...
Click to collapse
I flashed the attached file but root checker says not proper root what to do?

Is there any superuser app in the app drawer?

If yes then it is rooted dont worry u can confirm it with the lucky patcher and titanium backup

qwerfaseeh said:
If yes then it is rooted dont worry u can confirm it with the lucky patcher and titanium backup
Click to expand...
Click to collapse
Yes, there is and I reflashed the zip file again and its resolved and root checker is happy with it

So r u happy with this easy and proper root?

Also comment about the easiest IMEI backup method

if any one want to increase App storage which is almost 700 MB see first post
Use it only on Official KitKat and 2nd Custom ROM. Not with 1st custom ROM or with Official Leak on 1st Post.

Rooting, CWM, Stock Firmware And Custom Roms for Spice stellar Mi-509

So Guys I am here to give you all rooting tutorial for spice mi 509, how to install CWM recovery and firmwares installation
First of all download
SPflashtool(download here),
mtk droid tool(download here)
firmwares for spice m 509 download1, download2
ALL firmwares are stock firmwares
Flashing KitKat rom on spice mI 509
1: download firmware from this site(download Firmware v5). and extract it at a particular folder. In the firmware you will get spflashtool and drivers included. so if your drivers are not installed using usb cable install drivers from firmware.
2: now open spflashtool.exe and switch off your phone.
3: and click on scatter loading which is the second option in right and select MT6582_scatter_loading.txt file from firmware.
4: you will see many files are loaded.
5: now click download and connect your device without battery. when connected, press vol down so that spflashtool recognizes your device.
6: then you will see some blue and yellow bar filling up which means process is started. and when process completed you will see a green ring on the screen.
7: now start your device and enjoy KitKat on Spice Mi 509.
Now if you want to root your device
1: open mtk droid tool and switch off device
2: now connect the device using usb cable, while connecting press vol down button. this will install adb drivers of the device and if the drivers are already installed, mtkdroid tool will detect it.
3: now click on root at right corner of mtkdroid tool.
this will start rooting your device.
Now how to install CWM recovery in spice mi 509
1: open mtkdroid tool
2: click on root, recovery and backup and then select boot.img from the firmware downloaded above.
3: and you will see recovery file is made for the device
4: now close mtkdroid tool and place the CWM recovery(not boot patched), which you have made, in the firmware folder and rename it to recovery.img
5: now open spflashtool and load scatter file from firmware folder.
6: and uncheck all loaded files and only tick on recovery.
7: now click download and connect your device in switched off using USB cable and after connecting press vol down so that droid tool can detect your device.
8: and thus after the process completed you will see green ring. and now disconnect your device.
and open cwm recovery by pressing vol down and power button.
Now if above given rooting method does not work. use this method.
1: when you have installed CWM recovery download this super_SU zip.
2: and place this on your sd card
3: now open cwm in device and flash this zip by selcting install from sd and then select super_SU zip file.
4: your device is now rooted.
CUSTOM ROMS For Spice MI 509
1. FREEME OS(Awesome rom)- DOWNLOAD HERE
2. DARKL V1.6(Awesome)- Download Here
3. MIUI V6 5.4.10(Awesome rom, recommended)-> DOWNLOAD HERE
4. CLEANKAT V4.0(more free ram)- Download Here
5. Hive ROM (Awesome) -> Download Here
6. Touch OS (Fast and Smooth) -> Download Here
7. MERE(Most Epic Rom Ever)-> Download Here
Dolby Sound For Mere Rom- Download Here
8- Material V3 Rom-> Download Here
Fix For Material V3 Rom-> download here
9- Lewa OS V5 (only one bug-play store not wprking, use third party app)
DOWNLOAD HERE
10. LG G3 Clone Rom - DOWNLOAD HERE
11. Galaxy Rom- DOWNLOAD HERE
12. SlimFresh V9: DOWNLOAD HERE
13. XTREME os8: DOWNLAOD HERE
14. ANSP V4: DOWNLOAD HERE
Method to flash custom roms
1. You must be on Spice Stock Kitkat. Download from above link.
2. CWM/CTR must be installed.
3. Boot into recovery and Wipe Data-Factory Reset.
4. Now select Install zip and browse to the location where you have MERE ROM or MATERIAL V3 ROM zip and install it.
5. Reboot your device.
6. Flash the fix zip(only For Material Rom) and dolby digital zip(only for MERE Rom) after the first boot. We are done!
All the best!
Note:- I am not responsible for phone brick, tsunami or earth quake happens after this tutorial, if you follow!!!
:- flash dolby digital zip only for MERE rom
:- Flash fix.zip only for Material V3

how to connect usb pen drive
How to connect pen drive and external hdd to spice mi 509

cwm has working on my mobile but without sp flash tool

prasad143 said:
cwm has working on my mobile but without sp flash tool
Click to expand...
Click to collapse
the mobile comes with its own custom recovery and does not allow any flashing. And above tutorial is for those who are facing problem in rooting mi509 with kitkat. and flashing CWM using spflashtool does not require root.

cyanogenmod
how to cyanogenmod on spice mi509

here is the new MERE rom from Mr. illusionist...
http://forum.xda-developers.com/android/general/mt6582-epic-rom-spice-stellar-t2998644#post58079880
they are uploading the file and will be soon available for download

New roms added including MIUI V6
New Roms added Including AWESOME MIUI V6 rom.

gautam.is.sharma said:
New Roms added Including AWESOME MIUI V6 rom.
Click to expand...
Click to collapse
Hi Gautam,
Can you please advice how to install MIUI V6 install on my Spice Mi 509,
I am install kingroot and rooted.
Can just download miui rom and copy in sd card and update?
MIUI rom update without PC its possible.
Kind Regards
Manoj K. Chauhan

km230580 said:
Hi Gautam,
Can you please advice how to install MIUI V6 install on my Spice Mi 509,
I am install kingroot and rooted.
Can just download miui rom and copy in sd card and update?
MIUI rom update without PC its possible.
Kind Regards
Manoj K. Chauhan
Click to expand...
Click to collapse
Bro you dont need pc and laptops for installation of custom roms just needed a rooted device with CWM Recovery.
you should be on stock KITKAT.
For MIUI installations install CWM/CTR first, if you are having CWM/CTR already, then just put miui rom in your sd card then go to recovery in spice mi509.
Now wipe data and format system, then install from sd card. and reboot. wait for 5 min, and there you will explore miui in MI509.
say thanks to the porter of the rom.

gautam.is.sharma said:
Bro you dont need pc and laptops for installation of custom roms just needed a rooted device with CWM Recovery.
you should be on stock KITKAT.
For MIUI installations install CWM/CTR first, if you are having CWM/CTR already, then just put miui rom in your sd card then go to recovery in spice mi509.
Now wipe data and format system, then install from sd card. and reboot. wait for 5 min, and there you will explore miui in MI509.
say thanks to the porter of the rom.
Click to expand...
Click to collapse
http://cdn4.xda-developers.com/images/icons/icon14.gif
Thanks for your reply gautam, I have Android 4.2.2 version in my phone.
Can you please advice what can i do? to install MIUI rom....

km230580 said:
http://cdn4.xda-developers.com/images/icons/icon14.gif
Thanks for your reply gautam, I have Android 4.2.2 version in my phone.
Can you please advice what can i do? to install MIUI rom....
Click to expand...
Click to collapse
Click Thanks button instead of saying so. That helps a lot.
Flash stock Kitkat and then only you can install MIUI. Complete procedure is given in the first post.

NEW ROMS UPLOADED
FREEME OS-http://forum.xda-developers.com/android/development/mt6582-freeme-os-v3-0-spice-mi-509-t3051987
DarkL V1.6- http://forum.xda-developers.com/android/development/mt6582-darkl-v1-6-spice-mi-509-t3051857

saurabh1234 said:
NEW ROMS UPLOADED
FREEME OS-http://forum.xda-developers.com/android/development/mt6582-freeme-os-v3-0-spice-mi-509-t3051987
DarkL V1.6- http://forum.xda-developers.com/android/development/mt6582-darkl-v1-6-spice-mi-509-t3051857
Click to expand...
Click to collapse
Added your new roms.

This method work in spice steller mi 526?
gautam.is.sharma said:
So Guys I am here to give you all rooting tutorial for spice mi 509, how to install CWM recovery and firmwares installation
First of all download
SPflashtool(download here),
mtk droid tool(download here)
firmwares for spice m 509 download1, download2
ALL firmwares are stock firmwares
Flashing KitKat rom on spice mI 509
1: download firmware from this site(download Firmware v5). and extract it at a particular folder. In the firmware you will get spflashtool and drivers included. so if your drivers are not installed using usb cable install drivers from firmware.
2: now open spflashtool.exe and switch off your phone.
3: and click on scatter loading which is the second option in right and select MT6582_scatter_loading.txt file from firmware.
4: you will see many files are loaded.
5: now click download and connect your device without battery. when connected, press vol down so that spflashtool recognizes your device.
6: then you will see some blue and yellow bar filling up which means process is started. and when process completed you will see a green ring on the screen.
7: now start your device and enjoy KitKat on Spice Mi 509.
Now if you want to root your device
1: open mtk droid tool and switch off device
2: now connect the device using usb cable, while connecting press vol down button. this will install adb drivers of the device and if the drivers are already installed, mtkdroid tool will detect it.
3: now click on root at right corner of mtkdroid tool.
this will start rooting your device.
Now how to install CWM recovery in spice mi 509
1: open mtkdroid tool
2: click on root, recovery and backup and then select boot.img from the firmware downloaded above.
3: and you will see recovery file is made for the device
4: now close mtkdroid tool and place the CWM recovery(not boot patched), which you have made, in the firmware folder and rename it to recovery.img
5: now open spflashtool and load scatter file from firmware folder.
6: and uncheck all loaded files and only tick on recovery.
7: now click download and connect your device in switched off using USB cable and after connecting press vol down so that droid tool can detect your device.
8: and thus after the process completed you will see green ring. and now disconnect your device.
and open cwm recovery by pressing vol down and power button.
Now if above given rooting method does not work. use this method.
1: when you have installed CWM recovery download this super_SU zip.
2: and place this on your sd card
3: now open cwm in device and flash this zip by selcting install from sd and then select super_SU zip file.
4: your device is now rooted.
CUSTOM ROMS For Spice MI 509
1. FREEME OS(Awesome rom)- DOWNLOAD HERE
2. DARKL V1.6(Awesome)- Download Here
3. MIUI V6 5.4.10(Awesome rom, recommended)-> DOWNLOAD HERE
4. CLEANKAT V4.0(more free ram)- Download Here
5. Hive ROM (Awesome) -> Download Here
6. Touch OS (Fast and Smooth) -> Download Here
7. MERE(Most Epic Rom Ever)-> Download Here
Dolby Sound For Mere Rom- Download Here
8- Material V3 Rom-> Download Here
Fix For Material V3 Rom-> download here
9- Lewa OS V5 (only one bug-play store not wprking, use third party app)
DOWNLOAD HERE
10. LG G3 Clone Rom - DOWNLOAD HERE
11. Galaxy Rom- DOWNLOAD HERE
12. SlimFresh V9: DOWNLOAD HERE
13. XTREME os8: DOWNLAOD HERE
14. ANSP V4: DOWNLOAD HERE
Method to flash custom roms
1. You must be on Spice Stock Kitkat. Download from above link.
2. CWM/CTR must be installed.
3. Boot into recovery and Wipe Data-Factory Reset.
4. Now select Install zip and browse to the location where you have MERE ROM or MATERIAL V3 ROM zip and install it.
5. Reboot your device.
6. Flash the fix zip(only For Material Rom) and dolby digital zip(only for MERE Rom) after the first boot. We are done!
All the best!
Note:- I am not responsible for phone brick, tsunami or earth quake happens after this tutorial, if you follow!!!
:- flash dolby digital zip only for MERE rom
:- Flash fix.zip only for Material V3
Click to expand...
Click to collapse
This is work on spice Steller mi 526?

kevinsubba said:
This is work on spice Steller mi 526?
Click to expand...
Click to collapse
yes it will work......you only need to have your mi 526 firmware...not mi 509 firmware...