Database Info

Everything For Micromax A110 Canvas 2

Everything for A110
ROMS:
Stock:
Stock ROM V1 - http://d-h.st/NOR
Stock ROM V2 - http://d-h.st/0lp
Mobistel Cynus T2 ROM - http://www.sendspace.com/file/usu6q7 (Flashable zip)
Flash tool - http://goo.gl/4tyQ5
Custom ROMS:
JMP Xtream - http://bit.ly/ZacyS2
Dr.Bhokali ROM - http://bit.ly/Zrslki
Radeon ROM - http://d-h.st/PnP
Drivers:
http://bit.ly/13bkuq2
Rooting:
Rooting Tool - http://bit.ly/WAuST3
1. Enable USB De-bugging from Settings- Developer Options - USB Debugging
2. Download and Extract the Rooting tool in a single folder
3. Make sure the Drivers are installed
4. Right click on the 'Runme.bat' in the rooting tool and click 'Run as Administrator'
5. Connect the device and press '1'
6. Wait for the process to complete
Recovery:
Stock - http://bit.ly/137WVzj
Clockworkmod - http://bit.ly/WidRft
1. Download 'Mobile Uncle Tools' from Play Store.
2. Make sure your Phone is rooted
3. Rename the recovery you want to flash to 'recovery.img' and place it in the root of
your SD card.
4. Select 'Recovery Update' in 'MUT' and select the recovery.img from the list.
Storage Swapping:
Download - http://d-h.st/LFT
1. Install 'Root Explorer'
2. Using Root Explorer go to /system/etc and rename the file 'vold.fstab' to 'vold.fstab.bak'
3. Paste the downloaded 'vold.fstab' file to /system/etc and give system permissions
4. Reboot!
init.d Support (Required to run Supercharger):
1. Download 'Busybox Insatller' from Play Store.
2. Install Busybox 1.18.2 from 'Busybox Installer'
3. Download 'Script Manager' from Play Store.
4. Using 'Root Explorer' create a folder in the name of 'init.d' in /system/etc and give system permissions
5. Download the script from this link - http://bit.ly/WBY4ca
6. Open 'Script manager and browse to this script and run it as 'Superuser'
7. Reboot!
SuperCharger (After Enabling init.d):
1. Download Supercharger script - http://bit.ly/oBhiFg
2. Open 'Script Manager' and browse to the downloaded script.
3. Run it as Super user and the select the option you want
4. Reboot!
Entropy Seeder:
Use this to enhance your gaming experience and smoothness
1. Download Seeder Entropy - http://bit.ly/13bnMtm
2. Then flash this Zip through CWM - http://bit.ly/Uv8Fuy
3. Wipe cache and Dalvik Cache.
4. Reboot!.
12mp Camera Patch:
Flash via CWM this to use 12mp rear and 1.3mp front camera - http://bit.ly/Williy
Credits go to many. As of now I reckon Dileep Vargese and 'Droidiser.in'. If anyone knows, bring to my notice please.
Will be updated when more comes in
Pinocchio's nose grew with lies. My knowledge grows with 'Thanks' . Help it grow please
Facebook Support Group - https://www.facebook.com/groups/Micromaxcanvas2

kishoredroid said:
Everything for A110
ROMS:
Stock:
Stock ROM V1 - http://d-h.st/NOR
Stock ROM V2 - http://d-h.st/0lp
Mobistel Cynus T2 ROM - http://www.sendspace.com/file/usu6q7 (Flashable zip)
Flash tool - http://goo.gl/4tyQ5
Custom ROMS:
JMP Xtream - http://bit.ly/ZacyS2
Dr.Bhokali ROM - http://bit.ly/Zrslki
DZire ROM - http://bit.ly/TT21dQ
Drivers:
http://bit.ly/13bkuq2
Rooting:
Rooting Tool - http://bit.ly/WAuST3
1. Enable USB De-bugging from Settings- Developer Options - USB Debugging
2. Download and Extract the Rooting tool in a single folder
3. Make sure the Drivers are installed
4. Right click on the 'Runme.bat' in the rooting tool and click 'Run as Administrator'
5. Connect the device and press '1'
6. Wait for the process to complete
Recovery:
Stock - http://bit.ly/137WVzj
Clockworkmod - http://bit.ly/WidRft
1. Download 'Mobile Uncle Tools' from Play Store.
2. Make sure your Phone is rooted
3. Rename the recovery you want to flash to 'recovery.img' and place it in the root of
your SD card.
4. Select 'Recovery Update' in 'MUT' and select the recovery.img from the list.
Storage Swapping:
Download - http://d-h.st/LFT
1. Install 'Root Explorer'
2. Using Root Explorer go to /system/etc and rename the file 'vold.fstab' to 'vold.fstab.bak'
3. Paste the downloaded 'vold.fstab' file to /system/etc and give system permissions
4. Reboot!
init.d Support (Required to run Supercharger):
1. Download 'Busybox Insatller' from Play Store.
2. Install Busybox 1.18.2 from 'Busybox Installer'
3. Download 'Script Manager' from Play Store.
4. Using 'Root Explorer' create a folder in the name of 'init.d' in /system/etc and give system permissions
5. Download the script from this link - http://bit.ly/WlCPL6
6. Open 'Script manager and browse to this script and run it as 'Superuser'
7. Reboot!
SuperCharger (After Enabling init.d):
1. Download Supercharger script - http://bit.ly/oBhiFg
2. Open 'Script Manager' and browse to the downloaded script.
3. Run it as Super user and the select the option you want
4. Reboot!
Entropy Seeder:
Use this to enhance your gaming experience and smoothness
1. Download Seeder Entropy - http://bit.ly/13bnMtm
2. Then flash this Zip through CWM - http://bit.ly/Uv8Fuy
3. Wipe cache and Dalvik Cache.
4. Reboot!.
12mp Camera Patch:
Flash via CWM this to use 12mp rear and 1.3mp front camera - http://bit.ly/Williy
Credits go to many. As of now I reckon Dileep Vargese and 'Droidiser.in'. If anyone knows, bring to my notice please.
Will be updated when more comes in
Pinocchio's nose grew with lies. My knowledge grows with 'Thanks' . Help it grow please
Click to expand...
Click to collapse
Keep it up Good Going :good:
sorry for that (2 more rom in the treat)
i have one rom link
(Radeon™Rom : eXperience NXT)
http://forum.xda-developers.com/showthread.php?t=1981834

afzi said:
Keep it up Good Going :good:
sorry for that (2 more rom in the treat)
i have one rom link
(Radeon™Rom : eXperience NXT)
http://forum.xda-developers.com/showthread.php?t=1981834
Click to expand...
Click to collapse
radeon was not fully functional.. i will confirm with acervenky and if its ready for daily use, i will add it

Give the right way
kishoredroid said:
radeon was not fully functional.. i will confirm with acervenky and if its ready for daily use, i will add it
Click to expand...
Click to collapse
okes thanks for replay
i hope u used already thus three rom
can tell me, how i instal
Dzire Rom
http://forum.xda-developers.com/showthread.php?t=2043517]
couple of time i was install DZIRE ROM AND GO TO CUSTOM RECOVERY SELECT AND TRY TO INSTALL
BUT ITS FAIL
HOW CAN U USED OR INSTALL CAN U TELL ME
I WANT THIS ROM BECAUSE ITS MIUI BASED ROM

very informative post, my device is not detecting on my pc after installing custom rom. i am browsing sd card via using mobile go. can anyone help me to make it back to stock
thanks in advance
regards,
sunil:crying:

afzi said:
okes thanks for replay
i hope u used already thus three rom
can tell me, how i instal
Dzire Rom
http://forum.xda-developers.com/showthread.php?t=2043517]
couple of time i was install DZIRE ROM AND GO TO CUSTOM RECOVERY SELECT AND TRY TO INSTALL
BUT ITS FAIL
HOW CAN U USED OR INSTALL CAN U TELL ME
I WANT THIS ROM BECAUSE ITS MIUI BASED ROM
Click to expand...
Click to collapse
This ROM does not work. so removing it from the post.

sunilnair007 said:
very informative post, my device is not detecting on my pc after installing custom rom. i am browsing sd card via using mobile go. can anyone help me to make it back to stock
thanks in advance
regards,
sunil:crying:
Click to expand...
Click to collapse
Which ROM did you flash. BTW you can flash any of the stock ROMs from the post.

Removed system file from Micromax A110
Hi,
i was trying to do some changes to my micromax A110(android ics 4.0.4) with root access.
In an attempt to take a backup, i accidentally renamed /system/framework/framework.jar to /system/framework/framework.jar_old
Now the phone is not booting, i do not have CWM or other reflash tools.
I tried reflashing some ROM images, but they all fail with message: "Signature verification failed"
Is there someway i can regain access to the phone?
~Shailendra Kumar

maverick083 said:
Hi,
i was trying to do some changes to my micromax A110(android ics 4.0.4) with root access.
In an attempt to take a backup, i accidentally renamed /system/framework/framework.jar to /system/framework/framework.jar_old
Now the phone is not booting, i do not have CWM or other reflash tools.
I tried reflashing some ROM images, but they all fail with message: "Signature verification failed"
Is there someway i can regain access to the phone?
~Shailendra Kumar
Click to expand...
Click to collapse
Did you try flashing stock ROM V2 with the flash tool in the post? That will rewrite everything.

kishoredroid said:
Which ROM did you flash. BTW you can flash any of the stock ROMs from the post.
Click to expand...
Click to collapse
as on date i am using Radeaon rom v1 but my problem is same, pc is not resolving y phone. it only charging with usb cable. please help
:crying:
sunil

sunilnair007 said:
as on date i am using Radeaon rom v1 but my problem is same, pc is not resolving y phone. it only charging with usb cable. please help
:crying:
sunil
Click to expand...
Click to collapse
Cant get what you are trying to say. But download and install the drivers from the given link and try flashing your phone to stock ROM V2

Guys who would like to try out xperia launcher for their handsets can visit :
http://forum.xda-developers.com/showthread.php?t=2095956

Recovery not working
Last night i tried to get back to stock recovery so i restored it with MUT and when i went to recovery it didn't showed up. So i tried to get back in cwm recovery and it was also with the same result "Black screen" . My stock rom is working perfectly. Can anyone help me what to do as i want to install the T2 rom? Can we install it with flash tool?

Can the camera patch file should be installed in cwm or stock memory?
I am using jmp xtreme rom now.
Sent from my Samsung GT-S9081 using xda app-developers app

The stock V2 ROM..!
Can you please tell me if I have successfully updated or not here are my screen shots.....The orange signal for SIM1 is it correct? please help

nehalchoraria said:
Last night i tried to get back to stock recovery so i restored it with MUT and when i went to recovery it didn't showed up. So i tried to get back in cwm recovery and it was also with the same result "Black screen" . My stock rom is working perfectly. Can anyone help me what to do as i want to install the T2 rom? Can we install it with flash tool?
Click to expand...
Click to collapse
you cannot flah T2 via flash tool. go to /system/recovery-from-boot.p and rename it to 'recovery-from-boot.p.bak' and then try to flash stock recovery from MUT

violin.siva said:
Can the camera patch file should be installed in cwm or stock memory?
I am using jmp xtreme rom now.
Sent from my Samsung GT-S9081 using xda app-developers app
Click to expand...
Click to collapse
Flash it through CWM recovery

Arnav06 said:
Can you please tell me if I have successfully updated or not here are my screen shots.....The orange signal for SIM1 is it correct? please help
Click to expand...
Click to collapse
Yes.. you successfully flashed V2!

Cynus T2 ROM
I upgraded my A110 to Cynus T2 Yesterday from V2 ROM, and backup of userdata was taken immediately. Later, Factory Reset was done, and the problems started coming.
1) Default language changed to German, and the same was later changed to English by guessing the language menu.
2) The second major bottle neck was that there was no SIM connectivity to 2G network, either in SIM1 or SIM2. I tried everything possible, but failed.
3) My WIN7 laptop is now unable to detect my A110 in Switched OFF state with USB Debugging ON. As, a result, I am not able to flash back V2 ROM.
As a last resort, the previously saved user data was restored, and my A110 started working like a charm. Both the SIMs functional, and other features as per expectation. However, a factory reset will spoil every thing. Even now, my Laptop does not detect A110.
Kindly suggest how to revert back to V2 ROM.

JogyGeorge said:
I upgraded my A110 to Cynus T2 Yesterday from V2 ROM, and backup of userdata was taken immediately. Later, Factory Reset was done, and the problems started coming.
1) Default language changed to German, and the same was later changed to English by guessing the language menu.
2) The second major bottle neck was that there was no SIM connectivity to 2G network, either in SIM1 or SIM2. I tried everything possible, but failed.
3) My WIN7 laptop is now unable to detect my A110 in Switched OFF state with USB Debugging ON. As, a result, I am not able to flash back V2 ROM.
As a last resort, the previously saved user data was restored, and my A110 started working like a charm. Both the SIMs functional, and other features as per expectation. However, a factory reset will spoil every thing. Even now, my Laptop does not detect A110.
Kindly suggest how to revert back to V2 ROM.
Click to expand...
Click to collapse
Im on T2, no niggles. And it is getting detected without issues on the same win 7. When you connect your phone in factory mode, t2 will be recognized.

[STOCK V3] Link And Installation Guide for A117 STOCK V3 ROM

Links for
1. The Stock V3 is:
https://docs.google.com/uc?id=0B74b7RoIPJyfcVJKSzAtQUM5Q0k&export=download
2. SP Tool for A117 is:
http://d-h.st/tvi
3. USB Driver For A117 is:
http://www.mediafire.com/download/e6c4j3d8j6c5ui3/MTK+Universal+Drivers.rar
to Flash STOCK V3 with SP tool... follow the guide:
1. Download Flash Tool , Stock ROM AND USB Driver From Above LINK
2. Now install SP Tool drvers. see: http://forum.xda-developers.com/canvas-magnus/general/install-usb-drivers-sp-tools-magnus-a117-t2705967
3. NOW Create Folder IN Desktop Give It Name "FLASH"
4. Copy All Downloaded File In Recently Created Folder "FLASH"
5. Extract 'SP_Flash_Tool_v3.1304.0.119.rar' AND Also Extract Stock ROM File
6. NOW Open SP Flash Tools Folder AND Double Click ON "Flashtool.exe"
7. In Flashtool..Click On SCATTER-LOADING(FOUND IN RIGHT-SIDE) AND Select SCATTER File From STOCK ROM'S Folder
8. Flashtool Automatic Select All IMGs AND FILEs
9. NOW Completely Turn Off Your Phone
10. In Flashtool..Click On "DOWNLOAD" Button
11. Install USB Driver AND Connect Your Device To Computer
12. If Everything Is Right Then Process Will Start...Wait Till All Progress Completion
13. After All Process "GREEN CIRCLE" Appear In Center..
14. DISCONNECT PHONE AND POWER ON...THAT'S ALL
[instructions by Krunal32 and Rht555]
thats all.... enjoy
and if it helps.. PRESS THE THANKS BUTTON

checksum
PiyushGupta said:
Links for
1. The Stock V3 is:
https://docs.google.com/uc?id=0B74b7RoIPJyfcVJKSzAtQUM5Q0k&export=download
2. SP Tool for A117 is:
http://d-h.st/tvi
3. USB Driver For A117 is:
http://www.mediafire.com/download/e6c4j3d8j6c5ui3/MTK+Universal+Drivers.rar
to Flash STOCK V3 with SP tool... follow the guide:
1. Download Flash Tool , Stock ROM AND USB Driver From Above LINK
2. Now install SP Tool drvers. see: http://forum.xda-developers.com/canvas-magnus/general/install-usb-drivers-sp-tools-magnus-a117-t2705967
3. NOW Create Folder IN Desktop Give It Name "FLASH"
4. Copy All Downloaded File In Recently Created Folder "FLASH"
5. Extract 'SP_Flash_Tool_v3.1304.0.119.rar' AND Also Extract Stock ROM File
6. NOW Open SP Flash Tools Folder AND Double Click ON "Flashtool.exe"
7. In Flashtool..Click On SCATTER-LOADING(FOUND IN RIGHT-SIDE) AND Select SCATTER File From STOCK ROM'S Folder
8. Flashtool Automatic Select All IMGs AND FILEs
9. NOW Completely Turn Off Your Phone
10. In Flashtool..Click On "DOWNLOAD" Button
11. Install USB Driver AND Connect Your Device To Computer
12. If Everything Is Right Then Process Will Start...Wait Till All Progress Completion
13. After All Process "GREEN CIRCLE" Appear In Center..
14. DISCONNECT PHONE AND POWER ON...THAT'S ALL
[instructions by Krunal32 and Rht555]
thats all.... enjoy
and if it helps.. PRESS THE THANKS BUTTON
Click to expand...
Click to collapse
Hi,
Thanks for sharing. What's the valid checksum of Stock V3 ROM?

Checksum for STOCK V3
Checksum is [ed2c00354eb7a6d0d080453574e91b42]
enjoy.

Checksum for STOCK V3
PiyushGupta said:
Checksum is [ed2c00354eb7a6d0d080453574e91b42]
enjoy.
Click to expand...
Click to collapse
Thanks.

Drivers please help.
Please help me install the drivers.
I'm running Windows 8.1 and my phone is not being recognized.
I've followed all the steps properly but I'm not getting the phone to even show up on the device manager. SP tools refusing to detect. Thoroughly frustrated and wasted 3 days on this.

abhishekmaha said:
Please help me install the drivers.
I'm running Windows 8.1 and my phone is not being recognized.
I've followed all the steps properly but I'm not getting the phone to even show up on the device manager. SP tools refusing to detect. Thoroughly frustrated and wasted 3 days on this.
Click to expand...
Click to collapse
Use only latest sp flash tool.

But I did! Still not recognizing. Nothing's happening, and no yellow bar is coming.. I downloaded the latest version of sptools, tried about 6 different versions of drivers, but my phone is not visible even as an unknown device on the device manager.

abhishekmaha said:
But I did! Still not recognizing. Nothing's happening, and no yellow bar is coming.. I downloaded the latest version of sptools, tried about 6 different versions of drivers, but my phone is not visible even as an unknown device on the device manager.
Click to expand...
Click to collapse
Yo!!
well all the things worked properly for me as well as for another users..
soo @abhishekmaha did you installed the drivers from the given link or from any other source??
i insist you to download and install the drivers from here:
http://forum.xda-developers.com/canvas-magnus/general/install-usb-drivers-sp-tools-magnus-a117-t2705967
Try it and then let me know.
i'll always be happy to help

PiyushGupta said:
Yo!!
well all the things worked properly for me as well as for another users..
soo @abhishekmaha did you installed the drivers from the given link or from any other source??
i insist you to download and install the drivers from here:
http://forum.xda-developers.com/canvas-magnus/general/install-usb-drivers-sp-tools-magnus-a117-t2705967
Try it and then let me know.
i'll always be happy to help
Click to expand...
Click to collapse
ROM File size is 900 MB !1 Is it the right file ?

Download Error
PiyushGupta said:
Checksum is [ed2c00354eb7a6d0d080453574e91b42]
enjoy.
Click to expand...
Click to collapse
I tried to download this several times, but it fails at nearly 800MB. Please help.

@rubenhardy
Yes this is the Right file..
Dont worry it's checked by me and other users too.
@Myanju
No download error cuz of the link..
there may be some problem with you system or network..
you can see the screenshot about the successful download.

Network Error
PiyushGupta said:
@rubenhardy
Yes this is the Right file..
Dont worry it's checked by me and other users too.
@Myanju
No download error cuz of the link..
there may be some problem with you system or network..
you can see the screenshot about the successful download.
Click to expand...
Click to collapse
Hi,
I have attached screen shot of what i faced. please look into this and let me know what actions i should take.

Use IDM or some other downloder

Hi..
what are the features of stock v3.
does it mean kernal version
pls help
---------- Post added at 06:46 AM ---------- Previous post was at 06:39 AM ----------
what are its features....

Emergency calls only problem
HI there , firstly there was problem for invalid IMEI, i got it resolved by flashing sec_ro file again. but now its showing emergency calls only. my phone is able to detect SIM card but showing emergency calls only.
is there any modem patch that can help.
pls help.:crying:

Rooting, CWM, Stock Firmware And Custom Roms for Spice stellar Mi-509

So Guys I am here to give you all rooting tutorial for spice mi 509, how to install CWM recovery and firmwares installation
First of all download
SPflashtool(download here),
mtk droid tool(download here)
firmwares for spice m 509 download1, download2
ALL firmwares are stock firmwares
Flashing KitKat rom on spice mI 509
1: download firmware from this site(download Firmware v5). and extract it at a particular folder. In the firmware you will get spflashtool and drivers included. so if your drivers are not installed using usb cable install drivers from firmware.
2: now open spflashtool.exe and switch off your phone.
3: and click on scatter loading which is the second option in right and select MT6582_scatter_loading.txt file from firmware.
4: you will see many files are loaded.
5: now click download and connect your device without battery. when connected, press vol down so that spflashtool recognizes your device.
6: then you will see some blue and yellow bar filling up which means process is started. and when process completed you will see a green ring on the screen.
7: now start your device and enjoy KitKat on Spice Mi 509.
Now if you want to root your device
1: open mtk droid tool and switch off device
2: now connect the device using usb cable, while connecting press vol down button. this will install adb drivers of the device and if the drivers are already installed, mtkdroid tool will detect it.
3: now click on root at right corner of mtkdroid tool.
this will start rooting your device.
Now how to install CWM recovery in spice mi 509
1: open mtkdroid tool
2: click on root, recovery and backup and then select boot.img from the firmware downloaded above.
3: and you will see recovery file is made for the device
4: now close mtkdroid tool and place the CWM recovery(not boot patched), which you have made, in the firmware folder and rename it to recovery.img
5: now open spflashtool and load scatter file from firmware folder.
6: and uncheck all loaded files and only tick on recovery.
7: now click download and connect your device in switched off using USB cable and after connecting press vol down so that droid tool can detect your device.
8: and thus after the process completed you will see green ring. and now disconnect your device.
and open cwm recovery by pressing vol down and power button.
Now if above given rooting method does not work. use this method.
1: when you have installed CWM recovery download this super_SU zip.
2: and place this on your sd card
3: now open cwm in device and flash this zip by selcting install from sd and then select super_SU zip file.
4: your device is now rooted.
CUSTOM ROMS For Spice MI 509
1. FREEME OS(Awesome rom)- DOWNLOAD HERE
2. DARKL V1.6(Awesome)- Download Here
3. MIUI V6 5.4.10(Awesome rom, recommended)-> DOWNLOAD HERE
4. CLEANKAT V4.0(more free ram)- Download Here
5. Hive ROM (Awesome) -> Download Here
6. Touch OS (Fast and Smooth) -> Download Here
7. MERE(Most Epic Rom Ever)-> Download Here
Dolby Sound For Mere Rom- Download Here
8- Material V3 Rom-> Download Here
Fix For Material V3 Rom-> download here
9- Lewa OS V5 (only one bug-play store not wprking, use third party app)
DOWNLOAD HERE
10. LG G3 Clone Rom - DOWNLOAD HERE
11. Galaxy Rom- DOWNLOAD HERE
12. SlimFresh V9: DOWNLOAD HERE
13. XTREME os8: DOWNLAOD HERE
14. ANSP V4: DOWNLOAD HERE
Method to flash custom roms
1. You must be on Spice Stock Kitkat. Download from above link.
2. CWM/CTR must be installed.
3. Boot into recovery and Wipe Data-Factory Reset.
4. Now select Install zip and browse to the location where you have MERE ROM or MATERIAL V3 ROM zip and install it.
5. Reboot your device.
6. Flash the fix zip(only For Material Rom) and dolby digital zip(only for MERE Rom) after the first boot. We are done!
All the best!
Note:- I am not responsible for phone brick, tsunami or earth quake happens after this tutorial, if you follow!!!
:- flash dolby digital zip only for MERE rom
:- Flash fix.zip only for Material V3

how to connect usb pen drive
How to connect pen drive and external hdd to spice mi 509

cwm has working on my mobile but without sp flash tool

prasad143 said:
cwm has working on my mobile but without sp flash tool
Click to expand...
Click to collapse
the mobile comes with its own custom recovery and does not allow any flashing. And above tutorial is for those who are facing problem in rooting mi509 with kitkat. and flashing CWM using spflashtool does not require root.

cyanogenmod
how to cyanogenmod on spice mi509

here is the new MERE rom from Mr. illusionist...
http://forum.xda-developers.com/android/general/mt6582-epic-rom-spice-stellar-t2998644#post58079880
they are uploading the file and will be soon available for download

New roms added including MIUI V6
New Roms added Including AWESOME MIUI V6 rom.

gautam.is.sharma said:
New Roms added Including AWESOME MIUI V6 rom.
Click to expand...
Click to collapse
Hi Gautam,
Can you please advice how to install MIUI V6 install on my Spice Mi 509,
I am install kingroot and rooted.
Can just download miui rom and copy in sd card and update?
MIUI rom update without PC its possible.
Kind Regards
Manoj K. Chauhan

km230580 said:
Hi Gautam,
Can you please advice how to install MIUI V6 install on my Spice Mi 509,
I am install kingroot and rooted.
Can just download miui rom and copy in sd card and update?
MIUI rom update without PC its possible.
Kind Regards
Manoj K. Chauhan
Click to expand...
Click to collapse
Bro you dont need pc and laptops for installation of custom roms just needed a rooted device with CWM Recovery.
you should be on stock KITKAT.
For MIUI installations install CWM/CTR first, if you are having CWM/CTR already, then just put miui rom in your sd card then go to recovery in spice mi509.
Now wipe data and format system, then install from sd card. and reboot. wait for 5 min, and there you will explore miui in MI509.
say thanks to the porter of the rom.

gautam.is.sharma said:
Bro you dont need pc and laptops for installation of custom roms just needed a rooted device with CWM Recovery.
you should be on stock KITKAT.
For MIUI installations install CWM/CTR first, if you are having CWM/CTR already, then just put miui rom in your sd card then go to recovery in spice mi509.
Now wipe data and format system, then install from sd card. and reboot. wait for 5 min, and there you will explore miui in MI509.
say thanks to the porter of the rom.
Click to expand...
Click to collapse
http://cdn4.xda-developers.com/images/icons/icon14.gif
Thanks for your reply gautam, I have Android 4.2.2 version in my phone.
Can you please advice what can i do? to install MIUI rom....

km230580 said:
http://cdn4.xda-developers.com/images/icons/icon14.gif
Thanks for your reply gautam, I have Android 4.2.2 version in my phone.
Can you please advice what can i do? to install MIUI rom....
Click to expand...
Click to collapse
Click Thanks button instead of saying so. That helps a lot.
Flash stock Kitkat and then only you can install MIUI. Complete procedure is given in the first post.

NEW ROMS UPLOADED
FREEME OS-http://forum.xda-developers.com/android/development/mt6582-freeme-os-v3-0-spice-mi-509-t3051987
DarkL V1.6- http://forum.xda-developers.com/android/development/mt6582-darkl-v1-6-spice-mi-509-t3051857

saurabh1234 said:
NEW ROMS UPLOADED
FREEME OS-http://forum.xda-developers.com/android/development/mt6582-freeme-os-v3-0-spice-mi-509-t3051987
DarkL V1.6- http://forum.xda-developers.com/android/development/mt6582-darkl-v1-6-spice-mi-509-t3051857
Click to expand...
Click to collapse
Added your new roms.

This method work in spice steller mi 526?
gautam.is.sharma said:
So Guys I am here to give you all rooting tutorial for spice mi 509, how to install CWM recovery and firmwares installation
First of all download
SPflashtool(download here),
mtk droid tool(download here)
firmwares for spice m 509 download1, download2
ALL firmwares are stock firmwares
Flashing KitKat rom on spice mI 509
1: download firmware from this site(download Firmware v5). and extract it at a particular folder. In the firmware you will get spflashtool and drivers included. so if your drivers are not installed using usb cable install drivers from firmware.
2: now open spflashtool.exe and switch off your phone.
3: and click on scatter loading which is the second option in right and select MT6582_scatter_loading.txt file from firmware.
4: you will see many files are loaded.
5: now click download and connect your device without battery. when connected, press vol down so that spflashtool recognizes your device.
6: then you will see some blue and yellow bar filling up which means process is started. and when process completed you will see a green ring on the screen.
7: now start your device and enjoy KitKat on Spice Mi 509.
Now if you want to root your device
1: open mtk droid tool and switch off device
2: now connect the device using usb cable, while connecting press vol down button. this will install adb drivers of the device and if the drivers are already installed, mtkdroid tool will detect it.
3: now click on root at right corner of mtkdroid tool.
this will start rooting your device.
Now how to install CWM recovery in spice mi 509
1: open mtkdroid tool
2: click on root, recovery and backup and then select boot.img from the firmware downloaded above.
3: and you will see recovery file is made for the device
4: now close mtkdroid tool and place the CWM recovery(not boot patched), which you have made, in the firmware folder and rename it to recovery.img
5: now open spflashtool and load scatter file from firmware folder.
6: and uncheck all loaded files and only tick on recovery.
7: now click download and connect your device in switched off using USB cable and after connecting press vol down so that droid tool can detect your device.
8: and thus after the process completed you will see green ring. and now disconnect your device.
and open cwm recovery by pressing vol down and power button.
Now if above given rooting method does not work. use this method.
1: when you have installed CWM recovery download this super_SU zip.
2: and place this on your sd card
3: now open cwm in device and flash this zip by selcting install from sd and then select super_SU zip file.
4: your device is now rooted.
CUSTOM ROMS For Spice MI 509
1. FREEME OS(Awesome rom)- DOWNLOAD HERE
2. DARKL V1.6(Awesome)- Download Here
3. MIUI V6 5.4.10(Awesome rom, recommended)-> DOWNLOAD HERE
4. CLEANKAT V4.0(more free ram)- Download Here
5. Hive ROM (Awesome) -> Download Here
6. Touch OS (Fast and Smooth) -> Download Here
7. MERE(Most Epic Rom Ever)-> Download Here
Dolby Sound For Mere Rom- Download Here
8- Material V3 Rom-> Download Here
Fix For Material V3 Rom-> download here
9- Lewa OS V5 (only one bug-play store not wprking, use third party app)
DOWNLOAD HERE
10. LG G3 Clone Rom - DOWNLOAD HERE
11. Galaxy Rom- DOWNLOAD HERE
12. SlimFresh V9: DOWNLOAD HERE
13. XTREME os8: DOWNLAOD HERE
14. ANSP V4: DOWNLOAD HERE
Method to flash custom roms
1. You must be on Spice Stock Kitkat. Download from above link.
2. CWM/CTR must be installed.
3. Boot into recovery and Wipe Data-Factory Reset.
4. Now select Install zip and browse to the location where you have MERE ROM or MATERIAL V3 ROM zip and install it.
5. Reboot your device.
6. Flash the fix zip(only For Material Rom) and dolby digital zip(only for MERE Rom) after the first boot. We are done!
All the best!
Note:- I am not responsible for phone brick, tsunami or earth quake happens after this tutorial, if you follow!!!
:- flash dolby digital zip only for MERE rom
:- Flash fix.zip only for Material V3
Click to expand...
Click to collapse
This is work on spice Steller mi 526?

kevinsubba said:
This is work on spice Steller mi 526?
Click to expand...
Click to collapse
yes it will work......you only need to have your mi 526 firmware...not mi 509 firmware...

[Guide] How To Flash Stock Rom Using SP Flash Tool.

Here i am presenting the easy method how to flash stock rom by using SP flash tool
Recommendation :-
1. PC with installed USB Drivers
2. SP Flashtool herehttps://drive.google.com/file/d/0B-0BFYGPDi0YcWpNOE90a216enM/view?usp=sharing
Procedure :-
1. Download And Install USB drivers On Your Computer In Case of Already Installed skip this Step.
2. Power off your android smart phone and remove the battery.
3. download the STOCK ROM and extract on your PC.
4. also extract the SP Flash tool and Open ' Flash Tool exe"
5. Once the Flash tool is Launched click on "download"
6. After click on "scatter loading File" Tab.
7. Locate the "Scatter.txt" location in Which U can extract Your stock rom.
8. NOW,click on "DOWNLOAD" Tab.
9. Connect Your Computer By Using Data cable without battery
10. IN some micromax mobiles Tool will start To download without battery.
BUT, in some mobiles like my KARBONN TITANIUM S5 ULTRA Device Download will start After insert the Battery.
So, please kindly note this step.
11. Congratulation U Can successfully flash your STOCK ROM.
Kip Mind,
[SIZE=''3"] 1. The following steps are works only the stock and custom rom which comes with the scatter file.
2. please, full Backup your Device through stock or custom recovery.
3. This backup will helps to recover your IMEI.
4. In case of lost IMEI Restore previous Backup.
[/SIZE]
Credits:-
shubham shahu .
Hit thankx If u Like my Work :good:

New root android 6.0 H901

ROOT V20J H901
LOAD UP ON FILE WITH LG UP TOT
FILE HAS FULL ROOT + TWRP
LINK: https://drive.google.com/file/d/0B3R77elw9JjNQkpaUWkwNGstU1U/view
Flash files extract via LG UP tot
1: Flash files extract via LG UP choose upgrade then choose file tot.
2: Flash finished command "adb reboot recovery" or using the hard keys, power off, press the volume keys simultaneously 2 + source reduction, to release the logo and press the power key hands always, reduce the volume keys remain, keeping 2 keys, until into TWRP
3: When connected to a computer to copy TWRP SuperSU zip copied to the computer to download
4: Flash SuperSU
5: Reboot
Donate Paypal: [email protected]

You sir are my hero!! Donation coming in the next few days!!?

Slightly different way than we performed last night, but looks much more precise
Great work!
Sent from my A0001 using XDA-Developers mobile app

what exactly is "downloadmod"

tnpapadakos said:
what exactly is "downloadmod"
Click to expand...
Click to collapse
I believe he means "Download Mode"
Power Off
Hold Volume Up
Plug In USB
(i think)

tnpapadakos said:
what exactly is "downloadmod"
Click to expand...
Click to collapse
volume up on your phone as you plug in your usb

warp64 said:
volume up on your phone as you plug in your usb
Click to expand...
Click to collapse
so, in the stock recovery I guess...
what if I have stock LP, but rooted, and with TWRP recovery?

tnpapadakos said:
so, in the stock recovery I guess...
what if I have stock LP, but rooted, and with TWRP recovery?
Click to expand...
Click to collapse
Update TWRP to 3.0.2
Then you can use Eliminater74 Rom
Flash Part 1 Dont Reboot
Flash A Part 2 Dont Reboot
Flash SuperSU
Note**If Elimnater74s Rom does happen to delete your recovery.img then you can still flash TWRP by using FlashFire by ChainFire**
Also once you upgrade to MM even if its a ROM you CANNOT revert back to LP.

tnpapadakos said:
so, in the stock recovery I guess...
what if I have stock LP, but rooted, and with TWRP recovery?
Click to expand...
Click to collapse
Then you need to go to the Developer Section and see Eliminater74 because i think he's the only one with a rooted MM
[ROM] [STOCK] V10_H901_V20E_Stock2,430 posts
Thanks: 8,189

Double0EK said:
Update TWRP to 3.0.2
Then you can use Eliminater74 Rom
Flash Part 1 Dont Reboot
Flash A Part 2 Dont Reboot
Flash SuperSU
Note**If Elimnater74s Rom does happen to delete your recovery.img then you can still flash TWRP by using FlashFire by ChainFire**
Also once you upgrade to MM even if its a ROM you CANNOT revert back to LP.
Click to expand...
Click to collapse
OK thanks :good:

tungkick said:
Download rom kdz: https://docs.google.com/uc?id=0B3R77elw9JjNSmVsVjhjbWdLcEU&export=download
Download Tot add twrp: https://docs.google.com/uc?id=0B8mSVItI_cqRc0NPVlEtZmxqb2s&export=download
LG UP Download:MEGA, GOOGLEDRIVE
Step by step flash:
1. Download all file.
2. Install the LG Drivers.
3. Extract the RAR File to get the .TOT file.
4. Unzip "lgupnew.zip"
5. Run LGUP_Store_Frame_Ver_1_14_3.msi
6. LGUP_8994_DLL_Ver_0_0_1_18.msi
7. Copy the "common" folder to "C:\Program Files (x86)\LG Electronics\LGUP\model"
8. Plug phone into Downloadmod.
9. Run "LGUP" from your start menu.
10. Select your Phone if see option.
11. Choose bin file choosekdz v20e H901then chooseREFUBISH
12. Go to setting > develop > enabable usb debugging + oem unlock check.
13. Put downloadmod again, open lgup choose UPGRADE > choose file TOT LGH901AT-00-V20e-TMO-US-MAR-16-2016-ARB01+0.tot >Start.
14. Put phone to twrp download Supper SU (https://drive.google.com/file/d/0B8mSVItI_cqRNTlFeVJFNC1aejA/view?usp=sharing) Copy to phone memory then flash it> Done phone have root.
Donate : Click
Thank you @ Eliminater74
Click to expand...
Click to collapse
Where in these instructions do we flash the MM version of twrp? Or, is it already part of the tot file?

sanjsrik said:
Where in these instructions do we flash the MM version of twrp? Or, is it already part of the tot file?
Click to expand...
Click to collapse
It is part of the tot, directions look good, follow completely and you can have stock-rooted MM
Sent from my A0001 using XDA-Developers mobile app

demkantor said:
It is part of the tot, directions look good, follow completely and you can have stock-rooted MM
Click to expand...
Click to collapse
All I was looking for, thanks, will try this this weekend.
OP, just a suggestion, you may want to indicate that twrp is part of the tot file. It wasn't clear there.

This method certainly looks cleaner than the other method discussed last night. Looks like pure stock rooted which is exactly what I want. I passed out last night after i finished backing up everything which is a good thing now! I don't see anything about unlocking the bootloader in his instructions which is interesting. Basically it's flash the kdz, flash the tot, reboot recovery and flash superSu and you're golden. You would assume that this is necessary but has anyone tried this yet and not had to do that? It would actually be a bonus to not have to do that and avoid the corruption splash screen.

tungkick said:
Download rom kdz: https://docs.google.com/uc?id=0B3R77elw9JjNSmVsVjhjbWdLcEU&export=download
Download Tot add twrp: https://docs.google.com/uc?id=0B8mSVItI_cqRc0NPVlEtZmxqb2s&export=download
LG UP Download:MEGA, GOOGLEDRIVE
Step by step flash:
1. Download all file.
2. Install the LG Drivers.
3. Extract the RAR File to get the .TOT file.
4. Unzip "lgupnew.zip"
5. Run LGUP_Store_Frame_Ver_1_14_3.msi
6. LGUP_8994_DLL_Ver_0_0_1_18.msi
7. Copy the "common" folder to "C:\Program Files (x86)\LG Electronics\LGUP\model"
8. Plug phone into Downloadmod.
9. Run "LGUP" from your start menu.
10. Select your Phone if see option.
11. Choose bin file choose kdz v20e H901 then choose REFUBISH
12. Go to setting > develop > enabable usb debugging + oem unlock check.
13. Put downloadmod again, open lgup choose UPGRADE > choose file TOT LGH901AT-00-V20e-TMO-US-MAR-16-2016-ARB01+0.tot >Start.
14. Put phone to twrp download Supper SU (https://drive.google.com/file/d/0B8mSVItI_cqRNTlFeVJFNC1aejA/view?usp=sharing) Copy to phone memory then flash it> Done phone have root.
Donate : Click
Thank you @ Eliminater74
Click to expand...
Click to collapse
You will have a donation from me later in the week

tungkick said:
Download rom kdz: https://docs.google.com/uc?id=0B3R77elw9JjNSmVsVjhjbWdLcEU&export=download
Download Tot add twrp: https://docs.google.com/uc?id=0B8mSVItI_cqRc0NPVlEtZmxqb2s&export=download
LG UP Download:MEGA, GOOGLEDRIVE
Step by step flash:
1. Download all file.
2. Install the LG Drivers.
3. Extract the RAR File to get the .TOT file.
4. Unzip "lgupnew.zip"
5. Run LGUP_Store_Frame_Ver_1_14_3.msi
6. LGUP_8994_DLL_Ver_0_0_1_18.msi
7. Copy the "common" folder to "C:\Program Files (x86)\LG Electronics\LGUP\model"
8. Plug phone into Downloadmod.
9. Run "LGUP" from your start menu.
10. Select your Phone if see option.
11. Choose bin file choose kdz v20e H901 then choose REFUBISH
12. Go to setting > develop > enabable usb debugging + oem unlock check.
13. Put downloadmod again, open lgup choose UPGRADE > choose file TOT LGH901AT-00-V20e-TMO-US-MAR-16-2016-ARB01+0.tot >Start.
14. Put phone to twrp download Supper SU (https://drive.google.com/file/d/0B8mSVItI_cqRNTlFeVJFNC1aejA/view?usp=sharing) Copy to phone memory then flash it> Done phone have root.
Donate : Click
Thank you @ Eliminater74
Click to expand...
Click to collapse
If we are already on stock MM do we need to install the KDZ first? Or is that just to get you to MM?
Great write up by the way, even with a language barrier you made this simple and easy to understand!
[emoji106]
Sent from my LG-H901 using Tapatalk

Sorry for interrupting, i am H961N's user.
I am curious will this method also works on H961N and other models? Does this method need unlocked bootloader?
Cause' i am very desirous to have root on MM.
Thank you.

Everything seems fine until I get to this point:
13. Put downloadmod again, open lgup choose UPGRADE > choose file TOT LGH901AT-00-V20e-TMO-US-MAR-16-2016-ARB01+0.tot >Start.
Click to expand...
Click to collapse
after that I just get boot loops, red text boot verification failed.
I enabled OEM unlock in settings, so I don't know what the issue is. I also tried redownloading the files.
Nevermind, had to get into fastboot via Vol down + plug in USB then unlock the bootloader via adb command

ReelFiles said:
Everything seems fine until I get to this point:
after that I just get boot loops, red text boot verification failed.
I enabled OEM unlock in settings, so I don't know what the issue is. I also tried redownloading the files.
Click to expand...
Click to collapse
are you already on Marshmallow or are you doing this from Lollipop 5.1.1?

ReelFiles said:
Everything seems fine until I get to this point:
after that I just get boot loops, red text boot verification failed.
I enabled OEM unlock in settings, so I don't know what the issue is. I also tried redownloading the files.
Click to expand...
Click to collapse
is your bootloader unlocked? that was my problem. had to unlock it to get the phone to boot, then i got into TWRP and flashed su. i got it all done with the help of member warp64