If You Have got in Trouble after Wrong Flashing of any Custom Rom.No Need to worry,Now you Can Get Back To Stock Rom With This
Link of Stock Rom:-http://www.mediafire.com/folder/w3cbtjr2g4p91/iris_458q.
Procedure to install stock rom are as following :-
STEPS:
1. Download attached files and unzip the folder in your PC.
2.Extract it to a folder & Install drivers
3. Run SP Flash tool as an Administrator.
4. Load Scatterer file
5. press F9 or firmware>upgrade on flash tool.
6. connect your mobile in switched off mode.
7. wait for the SP tool procedure.
8. Green circle pop-up and say download complete.
9. Restart your phone.. VIOLA ur phone booted. Boot loop problem solved.
and you have got your original os back.
Note :-if you find this not well explanetory then refer to this linkhttp://forum.xda-developers.com/showthread.php?t=1982587
No Rear Camera
patel_s said:
If You Have got in Trouble after Wrong Flashing of any Custom Rom.No Need to worry,Now you Can Get Back To Stock Rom With This
Link of Stock Rom:-http://www.mediafire.com/folder/w3cbtjr2g4p91/iris_458q.
Procedure to install stock rom are as following :-
STEPS:
1. Download attached files and unzip the folder in your PC.
2.Extract it to a folder & Install drivers
3. Run SP Flash tool as an Administrator.
4. Load Scatterer file
5. press F9 or firmware>upgrade on flash tool.
6. connect your mobile in switched off mode.
7. wait for the SP tool procedure.
8. Green circle pop-up and say download complete.
9. Restart your phone.. VIOLA ur phone booted. Boot loop problem solved.
and you have got your original os back.
Click to expand...
Click to collapse
I tried to restore/ flash this to my LAVA IRIS 458Q but then the camera app is gone
and when I tried to download a camera app the rear camera is gone
sorry for inconvenience
nightrobin said:
I tried to restore/ flash this to my LAVA IRIS 458Q but then the camera app is gone
and when I tried to download a camera app the rear camera is gone
Click to expand...
Click to collapse
i think you have flashed it in a wrong device,that's why happening so.make sure your device is iris458q.
@patel_s man, can u help? Do U know anything how to solve problems with Update.zip on Hp Slate 7 VoiceTab 6100en? Can u help me and many of us which been screwed by aofull HP company??? If U can, ill tell U whole problem in few sentences. Thank U!
So Guys I am here to give you all rooting tutorial for spice mi 509, how to install CWM recovery and firmwares installation
First of all download
SPflashtool(download here),
mtk droid tool(download here)
firmwares for spice m 509 download1, download2
ALL firmwares are stock firmwares
Flashing KitKat rom on spice mI 509
1: download firmware from this site(download Firmware v5). and extract it at a particular folder. In the firmware you will get spflashtool and drivers included. so if your drivers are not installed using usb cable install drivers from firmware.
2: now open spflashtool.exe and switch off your phone.
3: and click on scatter loading which is the second option in right and select MT6582_scatter_loading.txt file from firmware.
4: you will see many files are loaded.
5: now click download and connect your device without battery. when connected, press vol down so that spflashtool recognizes your device.
6: then you will see some blue and yellow bar filling up which means process is started. and when process completed you will see a green ring on the screen.
7: now start your device and enjoy KitKat on Spice Mi 509.
Now if you want to root your device
1: open mtk droid tool and switch off device
2: now connect the device using usb cable, while connecting press vol down button. this will install adb drivers of the device and if the drivers are already installed, mtkdroid tool will detect it.
3: now click on root at right corner of mtkdroid tool.
this will start rooting your device.
Now how to install CWM recovery in spice mi 509
1: open mtkdroid tool
2: click on root, recovery and backup and then select boot.img from the firmware downloaded above.
3: and you will see recovery file is made for the device
4: now close mtkdroid tool and place the CWM recovery(not boot patched), which you have made, in the firmware folder and rename it to recovery.img
5: now open spflashtool and load scatter file from firmware folder.
6: and uncheck all loaded files and only tick on recovery.
7: now click download and connect your device in switched off using USB cable and after connecting press vol down so that droid tool can detect your device.
8: and thus after the process completed you will see green ring. and now disconnect your device.
and open cwm recovery by pressing vol down and power button.
Now if above given rooting method does not work. use this method.
1: when you have installed CWM recovery download this super_SU zip.
2: and place this on your sd card
3: now open cwm in device and flash this zip by selcting install from sd and then select super_SU zip file.
4: your device is now rooted.
CUSTOM ROMS For Spice MI 509
1. FREEME OS(Awesome rom)- DOWNLOAD HERE
2. DARKL V1.6(Awesome)- Download Here
3. MIUI V6 5.4.10(Awesome rom, recommended)-> DOWNLOAD HERE
4. CLEANKAT V4.0(more free ram)- Download Here
5. Hive ROM (Awesome) -> Download Here
6. Touch OS (Fast and Smooth) -> Download Here
7. MERE(Most Epic Rom Ever)-> Download Here
Dolby Sound For Mere Rom- Download Here
8- Material V3 Rom-> Download Here
Fix For Material V3 Rom-> download here
9- Lewa OS V5 (only one bug-play store not wprking, use third party app)
DOWNLOAD HERE
10. LG G3 Clone Rom - DOWNLOAD HERE
11. Galaxy Rom- DOWNLOAD HERE
12. SlimFresh V9: DOWNLOAD HERE
13. XTREME os8: DOWNLAOD HERE
14. ANSP V4: DOWNLOAD HERE
Method to flash custom roms
1. You must be on Spice Stock Kitkat. Download from above link.
2. CWM/CTR must be installed.
3. Boot into recovery and Wipe Data-Factory Reset.
4. Now select Install zip and browse to the location where you have MERE ROM or MATERIAL V3 ROM zip and install it.
5. Reboot your device.
6. Flash the fix zip(only For Material Rom) and dolby digital zip(only for MERE Rom) after the first boot. We are done!
All the best!
Note:- I am not responsible for phone brick, tsunami or earth quake happens after this tutorial, if you follow!!!
:- flash dolby digital zip only for MERE rom
:- Flash fix.zip only for Material V3
how to connect usb pen drive
How to connect pen drive and external hdd to spice mi 509
cwm has working on my mobile but without sp flash tool
prasad143 said:
cwm has working on my mobile but without sp flash tool
Click to expand...
Click to collapse
the mobile comes with its own custom recovery and does not allow any flashing. And above tutorial is for those who are facing problem in rooting mi509 with kitkat. and flashing CWM using spflashtool does not require root.
cyanogenmod
how to cyanogenmod on spice mi509
here is the new MERE rom from Mr. illusionist...
http://forum.xda-developers.com/android/general/mt6582-epic-rom-spice-stellar-t2998644#post58079880
they are uploading the file and will be soon available for download
New roms added including MIUI V6
New Roms added Including AWESOME MIUI V6 rom.
gautam.is.sharma said:
New Roms added Including AWESOME MIUI V6 rom.
Click to expand...
Click to collapse
Hi Gautam,
Can you please advice how to install MIUI V6 install on my Spice Mi 509,
I am install kingroot and rooted.
Can just download miui rom and copy in sd card and update?
MIUI rom update without PC its possible.
Kind Regards
Manoj K. Chauhan
km230580 said:
Hi Gautam,
Can you please advice how to install MIUI V6 install on my Spice Mi 509,
I am install kingroot and rooted.
Can just download miui rom and copy in sd card and update?
MIUI rom update without PC its possible.
Kind Regards
Manoj K. Chauhan
Click to expand...
Click to collapse
Bro you dont need pc and laptops for installation of custom roms just needed a rooted device with CWM Recovery.
you should be on stock KITKAT.
For MIUI installations install CWM/CTR first, if you are having CWM/CTR already, then just put miui rom in your sd card then go to recovery in spice mi509.
Now wipe data and format system, then install from sd card. and reboot. wait for 5 min, and there you will explore miui in MI509.
say thanks to the porter of the rom.
gautam.is.sharma said:
Bro you dont need pc and laptops for installation of custom roms just needed a rooted device with CWM Recovery.
you should be on stock KITKAT.
For MIUI installations install CWM/CTR first, if you are having CWM/CTR already, then just put miui rom in your sd card then go to recovery in spice mi509.
Now wipe data and format system, then install from sd card. and reboot. wait for 5 min, and there you will explore miui in MI509.
say thanks to the porter of the rom.
Click to expand...
Click to collapse
http://cdn4.xda-developers.com/images/icons/icon14.gif
Thanks for your reply gautam, I have Android 4.2.2 version in my phone.
Can you please advice what can i do? to install MIUI rom....
km230580 said:
http://cdn4.xda-developers.com/images/icons/icon14.gif
Thanks for your reply gautam, I have Android 4.2.2 version in my phone.
Can you please advice what can i do? to install MIUI rom....
Click to expand...
Click to collapse
Click Thanks button instead of saying so. That helps a lot.
Flash stock Kitkat and then only you can install MIUI. Complete procedure is given in the first post.
NEW ROMS UPLOADED
FREEME OS-http://forum.xda-developers.com/android/development/mt6582-freeme-os-v3-0-spice-mi-509-t3051987
DarkL V1.6- http://forum.xda-developers.com/android/development/mt6582-darkl-v1-6-spice-mi-509-t3051857
saurabh1234 said:
NEW ROMS UPLOADED
FREEME OS-http://forum.xda-developers.com/android/development/mt6582-freeme-os-v3-0-spice-mi-509-t3051987
DarkL V1.6- http://forum.xda-developers.com/android/development/mt6582-darkl-v1-6-spice-mi-509-t3051857
Click to expand...
Click to collapse
Added your new roms.
This method work in spice steller mi 526?
gautam.is.sharma said:
So Guys I am here to give you all rooting tutorial for spice mi 509, how to install CWM recovery and firmwares installation
First of all download
SPflashtool(download here),
mtk droid tool(download here)
firmwares for spice m 509 download1, download2
ALL firmwares are stock firmwares
Flashing KitKat rom on spice mI 509
1: download firmware from this site(download Firmware v5). and extract it at a particular folder. In the firmware you will get spflashtool and drivers included. so if your drivers are not installed using usb cable install drivers from firmware.
2: now open spflashtool.exe and switch off your phone.
3: and click on scatter loading which is the second option in right and select MT6582_scatter_loading.txt file from firmware.
4: you will see many files are loaded.
5: now click download and connect your device without battery. when connected, press vol down so that spflashtool recognizes your device.
6: then you will see some blue and yellow bar filling up which means process is started. and when process completed you will see a green ring on the screen.
7: now start your device and enjoy KitKat on Spice Mi 509.
Now if you want to root your device
1: open mtk droid tool and switch off device
2: now connect the device using usb cable, while connecting press vol down button. this will install adb drivers of the device and if the drivers are already installed, mtkdroid tool will detect it.
3: now click on root at right corner of mtkdroid tool.
this will start rooting your device.
Now how to install CWM recovery in spice mi 509
1: open mtkdroid tool
2: click on root, recovery and backup and then select boot.img from the firmware downloaded above.
3: and you will see recovery file is made for the device
4: now close mtkdroid tool and place the CWM recovery(not boot patched), which you have made, in the firmware folder and rename it to recovery.img
5: now open spflashtool and load scatter file from firmware folder.
6: and uncheck all loaded files and only tick on recovery.
7: now click download and connect your device in switched off using USB cable and after connecting press vol down so that droid tool can detect your device.
8: and thus after the process completed you will see green ring. and now disconnect your device.
and open cwm recovery by pressing vol down and power button.
Now if above given rooting method does not work. use this method.
1: when you have installed CWM recovery download this super_SU zip.
2: and place this on your sd card
3: now open cwm in device and flash this zip by selcting install from sd and then select super_SU zip file.
4: your device is now rooted.
CUSTOM ROMS For Spice MI 509
1. FREEME OS(Awesome rom)- DOWNLOAD HERE
2. DARKL V1.6(Awesome)- Download Here
3. MIUI V6 5.4.10(Awesome rom, recommended)-> DOWNLOAD HERE
4. CLEANKAT V4.0(more free ram)- Download Here
5. Hive ROM (Awesome) -> Download Here
6. Touch OS (Fast and Smooth) -> Download Here
7. MERE(Most Epic Rom Ever)-> Download Here
Dolby Sound For Mere Rom- Download Here
8- Material V3 Rom-> Download Here
Fix For Material V3 Rom-> download here
9- Lewa OS V5 (only one bug-play store not wprking, use third party app)
DOWNLOAD HERE
10. LG G3 Clone Rom - DOWNLOAD HERE
11. Galaxy Rom- DOWNLOAD HERE
12. SlimFresh V9: DOWNLOAD HERE
13. XTREME os8: DOWNLAOD HERE
14. ANSP V4: DOWNLOAD HERE
Method to flash custom roms
1. You must be on Spice Stock Kitkat. Download from above link.
2. CWM/CTR must be installed.
3. Boot into recovery and Wipe Data-Factory Reset.
4. Now select Install zip and browse to the location where you have MERE ROM or MATERIAL V3 ROM zip and install it.
5. Reboot your device.
6. Flash the fix zip(only For Material Rom) and dolby digital zip(only for MERE Rom) after the first boot. We are done!
All the best!
Note:- I am not responsible for phone brick, tsunami or earth quake happens after this tutorial, if you follow!!!
:- flash dolby digital zip only for MERE rom
:- Flash fix.zip only for Material V3
Click to expand...
Click to collapse
This is work on spice Steller mi 526?
kevinsubba said:
This is work on spice Steller mi 526?
Click to expand...
Click to collapse
yes it will work......you only need to have your mi 526 firmware...not mi 509 firmware...
Hello again XDA, kirito9 here with another guide on how to root the Alcatel One Touch T'pop. I decided to make a guide because i have not seen any guide on XDA concerning this phone and rooting.
Disclaimer: Your warranty is now void. You do this in your own risk. I do not take any responsibility to your device.
BACKUP YOUR DEVICE BEFORE DOING ANYTHING IN THE EVENT SOMETHING GOES WRONG.
Requirements:
- Windows 7 PC ( tested only on this)
- ADB drivers
- MTK drivers
- MT6575 Scatter file
- CWM or TWRP recovery
- SP Flash Tools
- SuperSU
Lets Begin
Flashing CWM or TWRP
1. First thing to do is to make sure all required drivers are installed. Do that by downloading the Universal ADB driver from this link and install it.
2. Then install the MTK drivers so that SP flash tools can work. Get those here, extract and install the drivers for windows 7.
3. Download your preferred recovery either CWM or TWRP below and place somewhere on your computer where you can find it easily.
4. Download the SP flash tools here and extract them.
5. Download the MT6575 Scatter file attached below.
6. Download the SuperSU zip file and place it either on internal or external of the phone.
6. Go to the sp flash tools folder and run flashtool.exe as administrator.
7. Click on scatter loading and select the MT6575 scatter file you downloaded.
8. Click on the recovery checkbox and then click on the white space in location. Select the recovery of your choice.
9. Turn off the phone, remove the battery then reinsert it.
10. Click on download and then connect the phone.
11. Wait for the flashing to complete then remove your phone.
Rooting the phone.
1. Boot into recovery then go to install, select the SuperSu zip file and install it.
2. After the flashing is complete, reboot your phone and see the SuperSU app in the app drawer
Credits
- me
-Chainfire for his SuperSu
May you also upload any stock ROM for OT-4010D ???
Root : JB 4.2
Root LAVA iris 300
1. Download The Framaroot APK here and install it to your phone.
2. Goto Settings > Security > and tick “Unknown Sources“.
3. Run Framaroot, choose Superuser or SuperSU.
4. Select Boromir or Bahamir.
5. You will see Success.
6. Reboot device, Done. :good:
OR
1. Download The Kingoroot APK here and install it to your phone.
2. Run King Root application.
3. Click on Root button. It take sometime for the rooting process.
4. Reboot device, done. :good:
Stock Rom : JB 4.2
Unbrick your LAVA iris 300
1. Download Stock Rom from here (by xdafirmware)and extract it.
2. Download mtk_usb driver from here and install it.
3. Open Sp flash tool, select scatter.txt.
4. Click on download.
5. Power off your device (confirm off), then connect usb cable. (dnt press any key, flash with battery).
6. System will detect your device as mediatek_preloader_com.
7. Sp Tool will recognise your Phone and flashing will start.
8. Once the flashing process is completed, a green ring will appear on your system.
9. Dissconnect, Power On, Done :good:
Full Instructions with images here (by techsultan).
Nandroid Backup/restore (recommended)
Take Full backup of your LAVA iris 300
You can take full backup with Custom recovery (Carliv/TWRP).
OR
1. Download Mtkdroid tool here (by gsmhosting)and extract it.
2. Download Pdanet+ andoid usb driver from here and install it.
3. Install BusyBox.apk in your device from playstore.
4. Enable debugging mode on your phone > Settings > Development. Tap 'android usb debugging' and make sure it's checked.
(if there is no option for development then go to setting > about phone > build number, tap on it 7 times, Go back to Settings menu and now you'll be able to see “Developer options” there.)
5. Open MTK Droid Tools folder with right-click on 'MTKdroidTools.exe' and Select 'Run as administrator'.
6. Wait several seconds while MTK Droid Tools communicates with your device. give root permission to adb-shell on your device.
7. Click the 'root' button in MTK Droid Tools to get temporary root shell.
8. Now get nvram backup. For full backup go to 2nd tab click on backup.
9. Here will be saved all backup \MtkDroidTools\backups.
10. Prepare this backup to make it flashable through SP Flash Tool. To do it, click on To 'prepare blocks for Flash Tool.'
11. A new windows will appear asking for a .md5 file of the backup. So navigate to the MTK Droid Tools folder where your backup is found. Open the backup that your have created earlier and select the files.md5 click open.
12. Wait for MTK Droid Tools to copy the files for SP Flash Tool, check the status messages until the copying/task is complete. Done
Full Instructions with images here (by rajit).
Restore :
1. Open , SP Flash Tool.exe run as administrator. Load the scatter file (click scatter-loading) which you have prepared from MTK Droid Tools to be flashable through SP Flash Tool.
2. After you loaded scatter file, All must checked except for Cache and USERDATA and most importantly, do not check DSP_BL or Preloader else you'll brick it.
3. To restore device, click Download from SP Flash Tool, a prompt will appear, just click Yes. Immediately connect your Power OFF device to your computer via USB .
4. Wait for the tool to detect your device and restore the Stock ROM that you have made. An alert with a green circle appears after successfully downloading the restore.
Full Instructions with images here (by MTK Hacker Pro).
Custom Recovery : TWRP/CTR
( Download and flash it with Sp FLash tool. Press Vol up and Power Key to boot in Recovery. )
Twrp for LAVA iris 300
TWRP2.8.0 alpha here
Note : There is lots of bug in it. pls post here.
CTR for LAVA iris 300
Carliv 2.4 alpha here
Note : Flipped Screen Bug.
wahh! Now just make a best kitkat rom for 300 plz!! ur gr8
Hello All this is a tutorial about How to flash TWRP without rooting Your MTK Powered Mobile..
Things You will Need. :-
~ A Pc
~ Any Custom Recovery For Your Device
~ SP Flash Tool
~ A Scatter File (For Your Chipset)
~ SmartPhone In Which You want to flash recovery
*Make sure You Have Mediatek Drivers Installed into Your PC
* Put SP Flash tool,Scatter File,And Recovery.img in the same folder
---------------###--------###------------###-------
First of All Switched Off Your Mobile
1. Turn on Your Pc [emoji12]
2. Open SP flash tool
3. load Scatter File
*Make Sure Only Recovery Box is Marked in SP flash tool
4. Click Download Button
5. Connect Your Device to PC using USB Cable
6. Wait for the process to be completed....
A green box will pop up. "Completed"
Unplug Your Device and and Press -PowerButton+VolumeUp - at the same time.. Keep Holding.. You can see You Have a Working Custom Recovery [emoji5]
Now You can Flash Xposed, SuperSu, or any ZIP that You want. .. [emoji4]
Sent from my Micromax E352 using Tapatalk