Hello All this is a tutorial about How to flash TWRP without rooting Your MTK Powered Mobile..
Things You will Need. :-
~ A Pc
~ Any Custom Recovery For Your Device
~ SP Flash Tool
~ A Scatter File (For Your Chipset)
~ SmartPhone In Which You want to flash recovery
*Make sure You Have Mediatek Drivers Installed into Your PC
* Put SP Flash tool,Scatter File,And Recovery.img in the same folder
---------------###--------###------------###-------
First of All Switched Off Your Mobile
1. Turn on Your Pc [emoji12]
2. Open SP flash tool
3. load Scatter File
*Make Sure Only Recovery Box is Marked in SP flash tool
4. Click Download Button
5. Connect Your Device to PC using USB Cable
6. Wait for the process to be completed....
A green box will pop up. "Completed"
Unplug Your Device and and Press -PowerButton+VolumeUp - at the same time.. Keep Holding.. You can see You Have a Working Custom Recovery [emoji5]
Now You can Flash Xposed, SuperSu, or any ZIP that You want. .. [emoji4]
Sent from my Micromax E352 using Tapatalk
Related
Presenting CWM recovery for Micromax Viva A72 and the steps for Rooting Micromax Viva A72.
Downloads
Recovery and scatter file
https://www.mediafire.com/?4zfa8z1zfw7dob5
Mtkdroid Tool
http://www.mediafire.com/download/zs9m5il96ywriwc/MtkDroidTools.rar
SPFlash Tool V3
http://www.mediafire.com/download/wjusbvd3b9e6q4g/SP_Flash_Tool_v3.rar
Driver
http://www.mediafire.com/download/zcahcuwex0vamam/MT6577%20USB%20VCOM%20drivers.7z
Click to expand...
Click to collapse
First we need to flash CWM Recovery using the SPFlash Tool.
0. Install driver on pc before doing any thing.
1. Extract recovery and scatter file in the same folder on desktop.
2. Start SPFlash Tool and select scatter file from the extracted folder.
[Note in SPFlash Tool only recovery option should be selected.]
3. Shutdown the phone and remove battery.
4. In SPFlash Tool click on Download button and then connect you phone, wait for a few sec and then you'll see the green which means CWM recovery has been flashed.
Second Rooting Micromax Viva A72
1. Download Supersu flashable zip to the sdcard of you phone.
2. Download Mtkdroid tool and extract it on pc.
3. Connect you phone to pc. (Note - debugging option should be selected before connecting phone to pc)
4. Open extracted folder and navigate to adb folder, here press Shift+Ctrt+right click of mouse now select "Open command Prompt here".
3. In the command prompt enter following command without quote "adb device" and then "adb reboot recovery", wait for a few secs. you phone will reboot to recovery.
4. flash supersu zip through CWM Recovery and reboot.
You have successfully Rooted your Micromax Viva A72 and installed CWM Recovery.:good:
CREDITS
1. rua1 for Mtkdroid Tool.
2. Me for creating recovery and testing
3. SPFlash Tool creator (I don't Know the name of the developer)
Disclaimer
I have tested this on 2 Phone without any problem.
Use it on your own RISK.
I or any other should not be held responsible for any damage to your phone, to you or to your brain
Click to expand...
Click to collapse
Hey Guys!
I am back with an awesome mod.
It's logo file of our Xolo Devices! It can be flashed in any MTK 65xx device but due to text on it made this only for HIVE
It's simple just download the zip file and flash it via recovery or via SP Flashtool Load scatter file MT6592, untick everything except for logo.bin and then locate the downloaded logo.bin and hit download button. Switch off your Phone and after it switches off it'll vibrate at that point keep the volume up button pressed and connect phone via PC and wait then you'll see a red bar followed by a yellow bar. After that you'll get a green circle saying succeeded flashing. Disconnect your phone and switch on and Enjoy!
Those who are rooted can flash the update.zip via CWM Recovery. Recovery and rooting guide for Xolo 8x-1000 here : Root Xolo HIVE 8x-1000 Easily.
Those who are unrooted just flash the logo.bin file with SP Flashtool. Latest Version 5.13 preferred. Make sure you have the drivers installed before flashing or PC won't detect the phone. To install drivers follow the guide above or use PdaNet and install it. Make sure to go to turn USB Debugging on during installation of drivers. To activate USB Debugging go to Settings -> Developer Options -> USB Debugging and connect the phone to PC and you'll get a pop-up on phone asking to accept fingerprint from the PC click yes and continue.
Here are the files : Rooted user flash update.zip via CWM Recovery and no need to wipe anything just download->flash->reboot.
Non-Rooted users use logo.bin file and flash via SP Flashtool preferred latest version. Also I am attaching the scatter file for ease.
As alone a developer it takes time and resources to build these files and therefore if you like my work please for sure consider a donation if you can or hit the thanks button as it will keep me encouraged to develop more. Thanks
Will this work on twrp?
Yes it will work with any recovery except stock
Sent from my bobobibi
Hello again XDA, kirito9 here with another guide on how to root the Alcatel One Touch T'pop. I decided to make a guide because i have not seen any guide on XDA concerning this phone and rooting.
Disclaimer: Your warranty is now void. You do this in your own risk. I do not take any responsibility to your device.
BACKUP YOUR DEVICE BEFORE DOING ANYTHING IN THE EVENT SOMETHING GOES WRONG.
Requirements:
- Windows 7 PC ( tested only on this)
- ADB drivers
- MTK drivers
- MT6575 Scatter file
- CWM or TWRP recovery
- SP Flash Tools
- SuperSU
Lets Begin
Flashing CWM or TWRP
1. First thing to do is to make sure all required drivers are installed. Do that by downloading the Universal ADB driver from this link and install it.
2. Then install the MTK drivers so that SP flash tools can work. Get those here, extract and install the drivers for windows 7.
3. Download your preferred recovery either CWM or TWRP below and place somewhere on your computer where you can find it easily.
4. Download the SP flash tools here and extract them.
5. Download the MT6575 Scatter file attached below.
6. Download the SuperSU zip file and place it either on internal or external of the phone.
6. Go to the sp flash tools folder and run flashtool.exe as administrator.
7. Click on scatter loading and select the MT6575 scatter file you downloaded.
8. Click on the recovery checkbox and then click on the white space in location. Select the recovery of your choice.
9. Turn off the phone, remove the battery then reinsert it.
10. Click on download and then connect the phone.
11. Wait for the flashing to complete then remove your phone.
Rooting the phone.
1. Boot into recovery then go to install, select the SuperSu zip file and install it.
2. After the flashing is complete, reboot your phone and see the SuperSU app in the app drawer
Credits
- me
-Chainfire for his SuperSu
May you also upload any stock ROM for OT-4010D ???
Here i am presenting the easy method how to flash stock rom by using SP flash tool
Recommendation :-
1. PC with installed USB Drivers
2. SP Flashtool herehttps://drive.google.com/file/d/0B-0BFYGPDi0YcWpNOE90a216enM/view?usp=sharing
Procedure :-
1. Download And Install USB drivers On Your Computer In Case of Already Installed skip this Step.
2. Power off your android smart phone and remove the battery.
3. download the STOCK ROM and extract on your PC.
4. also extract the SP Flash tool and Open ' Flash Tool exe"
5. Once the Flash tool is Launched click on "download"
6. After click on "scatter loading File" Tab.
7. Locate the "Scatter.txt" location in Which U can extract Your stock rom.
8. NOW,click on "DOWNLOAD" Tab.
9. Connect Your Computer By Using Data cable without battery
10. IN some micromax mobiles Tool will start To download without battery.
BUT, in some mobiles like my KARBONN TITANIUM S5 ULTRA Device Download will start After insert the Battery.
So, please kindly note this step.
11. Congratulation U Can successfully flash your STOCK ROM.
Kip Mind,
[SIZE=''3"] 1. The following steps are works only the stock and custom rom which comes with the scatter file.
2. please, full Backup your Device through stock or custom recovery.
3. This backup will helps to recover your IMEI.
4. In case of lost IMEI Restore previous Backup.
[/SIZE]
Credits:-
shubham shahu .
Hit thankx If u Like my Work :good:
IFlash carliv recovery to Qmobile x35 and replace your stock recovery.
I have ported carliv recovery to qmobile x35 after modifications to use only on qmobile 35 using Carliv's porting guide so don't use on any other device.
First of all make backup of your full rom using mtkdroid tools.
Follow the procedure to flash recovery to your Qmobile x35.
1. Download the recovery_carliv.img and mt6572.txt scatter files attached below.
Rename recovery_carliv.img to recovery.img
2. Download SPflash tool. As the fastboot utility does not work in this device so only use SPflash tool. And download Mtk preloader drivers.
3. Open SPflash tool and go to download tab and then click scatter file to choose scatter file that u downloaded from here. It will load the scatter file in download tab.
4. Now only tick the recovery checkbox and then move your mouse in the same line towards last column and click it.
It will open window to select the recovery file u want to flash.
5. Now select the downloaded recovery.img and press open.
6. Now turn your mobile off and put out the battery
7. Now click download in spflash tools download tab to start flashing.
8. Now plug your data cable to your pc and your fone. It will start downloading.
9. When a green circle appers on your pc screen it means it finished flashing.
10. Now disconnect your data cable from pc and put your battery back to your fone.
11. Now press power button + volume up botton together untill qmobile logo appears and then release the power button but dont release volume up botton untill recovery starts on your fone.
Thats all.
Now do what u want
Credits to Carliv for his files.