[Rom] Jelly Bean 4.1.1 for Qmobile Noir A8 by INCPak - Miscellaneous Android Development

[Rom] Jelly Bean 4.1.1 for Qmobile Noir A8 by INCPak - Miscellaneous Android Development

Good things comes to those who wait - Yes now you can have AOSP Jelly Bean 4.1.1 on your Noir A8, previously we released LeWa and TouchWiz which been the most outstanding Roms but ICS 4.0.4 OS but this time JB 4.1.1
For the Screenshots : Check out this post: http://www.incpak.com/tech/qmobile-noir-a8-jellybean-4-1-1/
Ubaid ur Rehman Khan did it since today it’s his birthday too special thanks to Ali Akber who cooperated all the way to make it possible and I would like to congrats entire INCPak Team for this. In our previous Roms you checked JB Camera and Gallery ( TouchWiz ) and in LeWa the outstanding Music Player as well as SRS effects.
INCPak IS NOT RESPONSIBLE FOR ANY KIND OF DAMAGE TO YOUR PHONE, IF YOU MADE ANY MISTAKE.
NOTE: FLASH AT YOUR OWN RISK !!!
This is a Flash-able Zip file that can be flashed only from ClockWorkMod Recovery ( CWMR ) . Make sure that your phone is ROOTED before Installing ClockWorkMod Recovery. If your phone is not ROOTED than first Root Procedure and require files are there on the post click the post below:
http://www.incpak.com/alerts/root-method-qmobile-noir-a8/
And for Installing CWMR
1) Download MobileUncle MTKTools from play store.
2) Download CMWR file from either of these links.
Link I( Recovery.img )
Link II ( RECOVERY.IMG )
3) Copy CMWR(Recovery.img) to your SD card.
4) Open MobileUncle MTKTools software, select recovery update option and then select recovery.img file that you copied in to SD.
For flashing Rom follow these steps very carefully:
1) Download the ROM. (http://www.incpak.com/tech/asop-jelly-bean-4-1-1-for-no)
2. Copy the downloaded file on your SD-CARD.
3. Power off your phone.
4. Turn your phone on in recovery mode (by pressing VOLUME UP + POWER buttons).
5. Make a backup.
Select “backup and restore”. And then select “backup”. When it is done select “Go Back”.
6. Select Wipe/Data Factory Cache.
7. Select Wipe Cache Partition.
8. Go to advanced and select wipe dalvik cache.
9. Go back to the main menu.
10. Select “Install zip from sdcard” –> “Choose zip from sdcard” –> Now select “A8_4.1.1_INCPak_Fixed” –> Select ”Yes”
11. Phone will reboot itself into Jellybean.

Battery Draining issue!
What about the battery draining issue in JB rom? there is a post in INCPak that suggests not to use JB rom!

ubaid88 said:
Good things comes to those who wait - Yes now you can have AOSP Jelly Bean 4.1.1 on your Noir A8, previously we released LeWa and TouchWiz which been the most outstanding Roms but ICS 4.0.4 OS but this time JB 4.1.1
For the Screenshots : Check out this post: http://www.incpak.com/tech/qmobile-noir-a8-jellybean-4-1-1/
Ubaid ur Rehman Khan did it since today it’s his birthday too special thanks to Ali Akber who cooperated all the way to make it possible and I would like to congrats entire INCPak Team for this. In our previous Roms you checked JB Camera and Gallery ( TouchWiz ) and in LeWa the outstanding Music Player as well as SRS effects.
INCPak IS NOT RESPONSIBLE FOR ANY KIND OF DAMAGE TO YOUR PHONE, IF YOU MADE ANY MISTAKE.
NOTE: FLASH AT YOUR OWN RISK !!!
This is a Flash-able Zip file that can be flashed only from ClockWorkMod Recovery ( CWMR ) . Make sure that your phone is ROOTED before Installing ClockWorkMod Recovery. If your phone is not ROOTED than first Root Procedure and require files are there on the post click the post below:
http://www.incpak.com/alerts/root-method-qmobile-noir-a8/
And for Installing CWMR
1) Download MobileUncle MTKTools from play store.
2) Download CMWR file from either of these links.
Link I( Recovery.img )
Link II ( RECOVERY.IMG )
3) Copy CMWR(Recovery.img) to your SD card.
4) Open MobileUncle MTKTools software, select recovery update option and then select recovery.img file that you copied in to SD.
For flashing Rom follow these steps very carefully:
1) Download the ROM. (http://www.incpak.com/tech/asop-jelly-bean-4-1-1-for-no)
2. Copy the downloaded file on your SD-CARD.
3. Power off your phone.
4. Turn your phone on in recovery mode (by pressing VOLUME UP + POWER buttons).
5. Make a backup.
Select “backup and restore”. And then select “backup”. When it is done select “Go Back”.
6. Select Wipe/Data Factory Cache.
7. Select Wipe Cache Partition.
8. Go to advanced and select wipe dalvik cache.
9. Go back to the main menu.
10. Select “Install zip from sdcard” –> “Choose zip from sdcard” –> Now select “A8_4.1.1_INCPak_Fixed” –> Select ”Yes”
11. Phone will reboot itself into Jellybean.
Click to expand...
Click to collapse
I tested it personally its very nice stable fast rom but with less memory. Pls inform me when get its update

azhar63 said:
I tested it personally its very nice stable fast rom but with less memory. Pls inform me when get its update
Click to expand...
Click to collapse
I'm still using this fantastic rom and want its update. So if any body finds please inform me.

malick186 said:
What about the battery draining issue in JB rom? there is a post in INCPak that suggests not to use JB rom!
Click to expand...
Click to collapse
I don't have any battery draing issue in this fixed ROM

Any method to flash jellybean via odin....

Related

[Q] ics rom with stock kernel on x8

can cm9 be flashed with stock kernel on x8 without bricking the phone.

ICS
---------------------------------------------------------
Req.
A rooted Phone
Clock Work Mod Recovery (installed)
---------------------------------------------------------
What Works ?
---------------------------------------------------------
1. Full hardware acceleration (the ICS way)
2. Opengl rendering
3. MiniCM Update notifications via c2dm (Settings -> System -> Update notifications)
4. In kernel ClockworkMod recovery v5.0.2.3 and option to reboot into Recovery
5. Modular Undervolting handled Settings -> Performance menu (by default not active)
6. Extra Settings display option for Ultra brightness, also handled via notification bar icons
7. Smooth 2D scrolling in menus
8. Native Wifi Hotspot
9. Native USB tethering
10. Native Bluetooth tethering
---------------------------------------------------------
What Does not Work?
---------------------------------------------------------
1. Camera
---------------------------------------------------------
Steps
---------------------------------------------------------
1. Download the ROM file from here :
2. Connect your phone to the PC via USB Cable.
3. Copy the downloaded ROM file to the root of your SD card and not within any folder. This helps you located the zip files easily while in recovery mode.
4. Disconnect your phone from the PC and turn it off.
5. Install Clock Work Mod
6. Boot into ClockworkMod Recovery.
7. Go to backup and restore>backup. This will create a nandroid backup which can be restored if you wish to revert back.
8. Go back and select “Install zip form SD card”>”Choose zip from SD card” and select the ROM zip file you had copied to the root of your SD card in Step 3.
9. Go back and select “wipe all data/factory reset”.
10. Go back and select “Reboot system now’.
----------------------------------------------------------------------------
Original Thread:
http://forum.xda-developers.com/showthread.php?t=1575094
----------------------------------------------------------------------------

muftiazan said:
---------------------------------------------------------
Req.
A rooted Phone
Clock Work Mod Recovery (installed)
---------------------------------------------------------
What Works ?
---------------------------------------------------------
1. Full hardware acceleration (the ICS way)
2. Opengl rendering
3. MiniCM Update notifications via c2dm (Settings -> System -> Update notifications)
4. In kernel ClockworkMod recovery v5.0.2.3 and option to reboot into Recovery
5. Modular Undervolting handled Settings -> Performance menu (by default not active)
6. Extra Settings display option for Ultra brightness, also handled via notification bar icons
7. Smooth 2D scrolling in menus
8. Native Wifi Hotspot
9. Native USB tethering
10. Native Bluetooth tethering
---------------------------------------------------------
What Does not Work?
---------------------------------------------------------
1. Camera
---------------------------------------------------------
Steps
---------------------------------------------------------
1. Download the ROM file from here :
2. Connect your phone to the PC via USB Cable.
3. Copy the downloaded ROM file to the root of your SD card and not within any folder. This helps you located the zip files easily while in recovery mode.
4. Disconnect your phone from the PC and turn it off.
5. Install Clock Work Mod
6. Boot into ClockworkMod Recovery.
7. Go to backup and restore>backup. This will create a nandroid backup which can be restored if you wish to revert back.
8. Go back and select “Install zip form SD card”>”Choose zip from SD card” and select the ROM zip file you had copied to the root of your SD card in Step 3.
9. Go back and select “wipe all data/factory reset”.
10. Go back and select “Reboot system now’.
----------------------------------------------------------------------------
Original Thread:
http://forum.xda-developers.com/showthread.php?t=1575094
----------------------------------------------------------------------------
Click to expand...
Click to collapse
i don't think that rom is for stock kenel .

i am myself said:
i don't think that rom is for stock kenel .
Click to expand...
Click to collapse
can u please tell any rom which uses stock kernel

thanks
muftiazan said:
---------------------------------------------------------
Req.
A rooted Phone
Clock Work Mod Recovery (installed)
---------------------------------------------------------
What Works ?
---------------------------------------------------------
1. Full hardware acceleration (the ICS way)
2. Opengl rendering
3. MiniCM Update notifications via c2dm (Settings -> System -> Update notifications)
4. In kernel ClockworkMod recovery v5.0.2.3 and option to reboot into Recovery
5. Modular Undervolting handled Settings -> Performance menu (by default not active)
6. Extra Settings display option for Ultra brightness, also handled via notification bar icons
7. Smooth 2D scrolling in menus
8. Native Wifi Hotspot
9. Native USB tethering
10. Native Bluetooth tethering
---------------------------------------------------------
What Does not Work?
---------------------------------------------------------
1. Camera
---------------------------------------------------------
Steps
---------------------------------------------------------
1. Download the ROM file from here :
2. Connect your phone to the PC via USB Cable.
3. Copy the downloaded ROM file to the root of your SD card and not within any folder. This helps you located the zip files easily while in recovery mode.
4. Disconnect your phone from the PC and turn it off.
5. Install Clock Work Mod
6. Boot into ClockworkMod Recovery.
7. Go to backup and restore>backup. This will create a nandroid backup which can be restored if you wish to revert back.
8. Go back and select “Install zip form SD card”>”Choose zip from SD card” and select the ROM zip file you had copied to the root of your SD card in Step 3.
9. Go back and select “wipe all data/factory reset”.
10. Go back and select “Reboot system now’.
----------------------------------------------------------------------------
Original Thread:
http://forum.xda-developers.com/showthread.php?t=1575094
----------------------------------------------------------------------------
Click to expand...
Click to collapse
thanks bosss

CWM backup ROM
Hi all,
I have rooted my Lenovo ThinkPad tablet and installed CWM by instructions in there http://forum.xda-developers.com/showthread.php?t=1831161 ...I wanted to flash to Cyanogenmod10, but before it I wanted to backup original ROM. And my problem is - there is no "Backup & restore" option in CWM's boot menu...where could be a mistake?

HTC Explorer Update firmware to 2.3.5 to 4.0.4

How to Upgrade version Of android 2.3.5 to 4.0.4
HTC Explorer, the low budget phone from HTC get some love from Developer community. Unofficial Build of CyanogenMod 9 is available for HTC Explorer. CyanogenMod 9 is based on Android 4.0 Ice Cream Sandwich and it brings all ICS and other CM goodness to HTC Explorer.
Right now ROM is suitable for daily use but problem may occur as it yet to hit stable version.
...100 % TESTED TUTORIAL BY ADMIN...
Note -Flashing ROM will void your warranty or may dead your Explorer. This ROM is compatible with International HTC Explorer/Pico, don’t try to flash on any other phone. l will not be responsible for any damage.
Requirements:
Phone must be Rooted and CWM Installed on it. (View First post)
Make sure that your phone is charged at least 70%.
Backup all your personal data, because this method will wipe everything from your phone (No need to backup SD Card)
Download ROM zip & Google Apps (Optional) zip file from here.Download any one from first five. (around 109 mb)
http://forum.xda-developers.com/showpost.php?p=29938928&postcount=2
Instructions to Install CyanogenMod 9 ICS ROM on HTC Explorer:
(1) I assume you downloaded ROM zip file and Google Apps zip file from above link.
(2) Create folder with name of "Root" and Copy both the files which you download to Root of your SD Card.
(3) Now Disconnect phone from PC and Boot it into Recovery mode ( Press Volume Up + Home button + Power buttons ) Now recovery mode is open and select.
(4) From Main menu, Select ‘Wipe data/factory reset’ and then select ‘Yes’
(5) Select ‘Wipe data & cache’ and then select ‘Yes’
(6) Now go to ‘select zip from SD Card’ option and then select ‘Choose zip from sdcard’. Go on Root folder and select the CM9 ROM zip file you copied in SD card.
(7) Wait for process to complete, After the installation is finished, now flash Google Apps in a similar way (No need to clear cache).
(8) Go back to main menu and select ‘Reboot now’ to reboot your phone in normal mode.
You've successfully installed CyanogenMod 9 ROM on HTC Explorer.:good::fingers-crossed:
Press the "Thanks" button if I've helped. ----------------------------------------------------------------

A2107A-H Firmware update, Custom Rom and CWM Recovery (calling feature - unlocked)

Finally it happend, NEW CUSTOM ROM (CWM Backup Mode) made by me.
screenshots
https://www.dropbox.com/sh/yc7z5904i0e1ua6/6FSVniszMM#/
Just see it in action: http://www.youtube.com/watch?v=joeJtkw-85c
- CWM Recovery
- Firmware version S314
- Calling feature
- Fully working google service
- Fully Roted
- Titanum Backup
- TouchPal Keyboard
- Stock Browser
- Full synchronization with google service
- Radio without headphones
and many more
The installation is very simple and will take about 5 minutes if you already have a CWM Recovery
I spend nearly whole week to build this customisation, so I decide to ask you guys for some support for my work. So if you like the job I done so far and want to see a new improvements in a future including a Jelly Bean on Lenovo A2107A-H please support me. In this case I made a auction on a EBAY for this modiffication and it will cost just a £5. Please respect my work and don't distribute my mod behind my back. If you not agreed with this, I waiting for your coments guys. Thank you.
http://www.ebay.co.uk/itm/221163148...l?_sacat=0&_from=R40&_nkw=221163148891&_rdc=1
I will send you a link to a firmware and manual after a payment
Enjoy!!!
OLD MANUAL (no files on a server)
Manual and files for installation Custom ROM + CWM Recovery + IMEI repair + ROOT + Calling Feature on IdeaPad A2107A-H
Password for archive:"xdadevpemergency"
Firmware
1. CWM Recovery ROM.
https://rapidshare.com/files/3358458529/CWM Firmware.zip
2. A2107A-H v9 ROM in a zip format for install by CWM Recovery.
https://rapidshare.com/files/241044528/A2107A-H v9.zip
3. Google apps for google store and account sync (installation by CWM Recovery)
https://rapidshare.com/files/2713449644/gapp-ics.zip
Tools
1. SP Flash Tool for formating device NAND FLASH.
https://rapidshare.com/files/1465167471/SP_Flash_Tool_v3.1206.01.zip
2. Smarthphone Multiport for Flash the CWM REcovery ROM.
https://rapidshare.com/files/2880421726/SP_MDT_src_v3.1216.02_A2012.05.22.zip
3. MTK Droid Tools for easy IMEI repair and easy ROOT install.
https://rapidshare.com/files/3431631170/MTKdroidTools.zip
Manual
Device formating
1. Open SP Flash Tool
2. Choose a "Scatter-loading" file from "CWM Recovery ROM" folder
3. Press "Format" in a left top corner of SP Flash Tool
4. Choose "Auto Format Nand Flash" -> "Format whole flash" and press "OK"
5. Connect device to PC, press "reset" button on a back of your device
Your device should be formated on this point.
6. Close SP Flash Tool
Installing CWM Recovery ROM
1. Open Smartphone Multiport
2. Press the "Scatter File" button and choose this file from a CWM Recovery ROM folder
3. Tick to both "Sel All"
Settings for Smartphone Multiport:
Type: Firmware upgrade
Baud rate: 921600
DA download all: High speed
USB Port: BootRom --->DA
4. Press Start all
On this point firmware should be downloaded on your decive, if nothing happend press the "reset button" on a back of your device.
After this operation you will have a CWM Recovery, but not a main firmware!!!
Installing main firmware
1. Copy A2107A-H v9.zip and gapp-ics.zip to sd card.
2. Boot in to CWM Recovery mode by:
- Press the "reset" button on your device
- Press and hold for a 3 sec. "power" button on your device (after 3 sec. releas the buton)
- When you see "lenovo" logo press and hold vol+ and vol- untill you will boot in to CWM Recovery mode
In a CWM Recovery Mode
Menu down = vol-
Menu up= vol+
accept= power button
1. Choose "wipe data/factory reset"
2. Choose "wipe cache partition"
3. Choose "Advanced" -> "Wipe Dalvik Cache"
4. Go to main menu of CWM Recovery mode
5. Choose "install zip from sdcard"
6. Choose "choose zip from sdcard"
7. Find the A2107A-H v9.zip file.
8. Choose "Yes - Install A2107A-H v9.zip"
Do the same think with gapp-ics.zip and reboot your device.
IMEI repair and ROOT installation
1. Connect your device to the PC (device must be turned on and connected as "USB debugging" and "Media device)
2. Start MTK Droid Tools
3. Press Replace IMEI (fill up IMEI 1 and IMEI 2) and save
4. Reboot device
On this point you should have a IMEI working, if not repeat IMEI repair from point 3.
5. Press ROOT button if the program ask for anythink press "YES" (your device will reboot 2 or 3 times and it will be ready to go).
Click to expand...
Click to collapse

Reupload Please

Please reupload the tools section.
Thank you in advance

I will but I dont know where, they was on rapidshare, Blocked already, on a dropbox, blocked already. Any ideas where to upload them?

pemergency said:
I will but I dont know where, they was on rapidshare, Blocked already, on a dropbox, blocked already. Any ideas where to upload them?
Click to expand...
Click to collapse
Hi there,
Can you try http://uploaded.net/ ?
I used it for many files so far and seems to work OK.
Thank you.

re
yesterday on Chinese side get everything.
flashed - rom (lots of Chinese garbage) does - only Chinese and English.
English also very buggy - phone goes.
sorry ... google translator

.................................................

german language ?

Yes for settings and all stock app. All apps added by myself are not translated
Sent from my GT-N7000 using xda app-developers app

brief assessment of the costum rom "pemergency" mod = which must be paid
- Setup / flash -> OK
- IMEI must be corrected manually by terminal as tool does not work
- Constant error message "simcard failed" (slot2) although only 1 slot has
- "apex launcher" can not uninstall, then stops at the boot process lenovo screen -> I would also like to use but "default / original" surface.
- Spoke only Russian / English / chinese integrated as standart
- Morelocale2 indeed is an alternative but not "original"
ok, first feedback - hope the rom is modified?

mrbonsen said:
brief assessment of the costum rom "pemergency" mod = which must be paid
a) Setup / flash -> OK
b) IMEI must be corrected manually by terminal as tool does not work
c) Constant error message "simcard failed" (slot2) although only 1 slot has
d) "apex launcher" can not uninstall, then stops at the boot process lenovo screen -> I would also like to use but "default / original" surface.
e) Spoke only Russian / English / chinese integrated as standart
f) Morelocale2 indeed is an alternative but not "original"
ok, first feedback - hope the rom is modified?
Click to expand...
Click to collapse
a) no comment
b) IMEI must be corrected and it is mentioned in a manual, it doesnt need to be done by terminal, you can simple generate a file and swap with a root explorer
c) This Rom is for A2107a-h which is a 2 slots device, so I dont see a problem on this point
d) I said as this is modiffication, I decide to remove a stock launcher, you can install any other one of your choice
e) I also answered to your question as for german language only original apps are translated and the main system, on other threeead is clearlly said as this rom using more locale 2 for translation.
f) and as a last one, why you expecting anything original in a modiffied ROM?
I stoping to doing anything with this ROM for a simple reason:
- FREE ROM = 900 downloads,
- PAID ROM FOR £5 = 5 downloads - embarrassing
Why?
and one more thing...
My correspondence with mrbonsen, when I tried to help him out with the installation process is also interesting. About 10 emails with instructions to mrbonsen and also 10 emails of insults from mrbonsen. That means something....
So conclusion is simply... go back to your original firmware and I will give you your £5 back

and also 10 emails of insults from mrbonsen.
Click to expand...
Click to collapse
I would, at least at three mail the conversation ended :victory:
b) IMEI must be corrected and it is mentioned in a manual, it doesnt need to be done by terminal, you can simple generate a file and swap with a root explorer
Click to expand...
Click to collapse
if you tool mitsendest + description for the correction of the IMEI, it should work well. not every user knows another solution
But no matter now - can only recommend not to use this rom :good:
ask no insult but (as in the mails) what's wrong on the screen, apex launcher bug or "bug mrbonsen" - display does not turn or apex

mrbonsen said:
I would, at least at three mail the conversation ended :victory:
if you tool mitsendest + description for the correction of the IMEI, it should work well. not every user knows another solution
But no matter now - can only recommend not to use this rom :good:
ask no insult but (as in the mails) what's wrong on the screen, apex launcher bug or "bug mrbonsen" - display does not turn or apex
Click to expand...
Click to collapse
Hehe, ok, this is all my fault, I just should expecting as this ROM could be installed by a persona like you, my bad
BTW I using this ROM from a weak or more and have no problem at all. Waiting for comment from other users ...
Sent from my IdeaTab A2107A-H using XDA Premium HD app

And one more thing, what model do you have? if anything was wrong you could always ask, you didn't so....
Sent from my IdeaTab A2107A-H using XDA Premium HD app

pemergency said:
And one more thing, what model do you have? if anything was wrong you could always ask, you didn't so....
Sent from my IdeaTab A2107A-H using XDA Premium HD app
Click to expand...
Click to collapse
You did a great job and 900 downloads are impressive. i have a A2107A-H 1GHz 1GB RAM 16GB Flash - how come nobody is providing feedback or helping out in this development? Could there be a way to update.zip just the standard factory ROM? maybe that could be possible by doing a diff on the chinese and european source code? sorry i'm just a lamer looking to help out. any news from lenovo developers on the 4.1 release?
today is your cwm rom accessible for download for trial?

Ofcourse it is possible to get back the standard ROM just ask someone who still have a European ROM to do a copy by nandroid backup and you can restore this by centeCWM. So after that you will have a stock ROM with CWM but without calling feature.
I nearly finish another ROM with calling feature but this will be based on Russian ROM. I just need to get European system backup to do it same thing with European ROM.
Sent from my IdeaTab A2107A-H using XDA Premium HD app

Password for CWM Firmware : xdadevpemergency
NEW MANUAL AND FILES (discontinued project)
For both option's copy "clockworkmode/backup/modpemergency" folder to sdcard internal or external!!!
OPTION 1: For CWM Recovery devices:
Downloads:
Pemergency MOD custom firmware https://hotfile.com/dl/182755080/f7d30b5/07122012.rar.html
1. Unpack archive 07122012.rar
2. Copy whole folder clockworkmode to your internal storage or external sdcard.
It should looks like this one:
/sdcard/clockworkmode/backup/modpemergency (nandroid.md5 and system.ext4.tar inside this folder)
Boot in to CWM Recovery:
1. switch off dfevice
2. Hold Power Button for 3 sek, release and hold vol+ and - together untill you will boot in to recovery mod
In CWM Recovery:
1. Choose "backup and restore"
2. Choose "advanced restore from internal sdcard" or "advanced restore" in a case of using external card
3. Choose "modpemergency/"
4. Choose "Restore system"
5. Choose "Yes - Restore System"
After update choose
1. "wipe data/factory reset"
2. "wipe cache partition"
4. "advanced/wipe dalvik"
5. reboot.
It will take a while to boot for a first time so no worries
OPTION 2: For non CWM recovery devices
Copy clockworkmode/backup/modpemergency to your external card, it should looks like this:
/sdcard/clockworkmode/backup/modpemergency (nandroid.md5 and system.ext4.tar inside this folder)
downloads:
1. CWM Recovery https://hotfile.com/dl/182805290/fe4ac19/CWM_Firmware.zip.html
2. Flash Tools https://hotfile.com/dl/182820835/8dd3c06/Tools.rar.html
3. New Flash Tool without error (replacement for the one from Tools.rar package https://hotfile.com/dl/183057140/692cbbb/SP_MDT_src_v3.1216.02_A2012.05.22.zip.html
4. Pemergency MOD custom firmware https://hotfile.com/dl/182755080/f7d30b5/07122012.rar.html
5. USB Driver
For windows xp https://hotfile.com/dl/182950442/360c725/USB_VCOM_Driver.zip.html
For windows seven https://hotfile.com/dl/182950251/0c9ee3d/usb_driver.zip.html
Install CWM Recovery:
Device formating
1. Open SP Flash Tool
2. Choose a "Scatter-loading" file from "CWM Recovery ROM" folder
3. Press "Format" in a left top corner of SP Flash Tool
4. Choose "Auto Format Nand Flash" -> "Format whole flash" and press "OK"
5. Connect device to PC, press "reset" button on a back of your device
Your device should be formated on this point.
6. Close SP Flash Tool
Installing CWM Recovery ROM
1. Open Smartphone Multiport
The "Data source file" and "Da file name" should have assigned path from SP_MDT_src_v3.1216.02_A2012.05.22 folder. If is not assigned properly please do the folowing steps:
- File/Open Download Agent File and choose file MTK_DATABASE.mdb from SP_MDT_src_v3.1216.02_A2012.05.22 folder
and
- Factory database/Setup data source file and choose file MTK_AllInOne_DA.bin from SP_MDT_src_v3.1216.02_A2012.05.22 folder
2. Press the "Scatter File" button and choose this file from a CWM Recovery ROM folder
3. Tick to both "Sel All"
Settings for Smartphone Multiport:
Type: Firmware upgrade
Baud rate: 921600
DA download all: High speed
USB Port: BootRom --->DA
4. Press Start all
On this point firmware should be downloaded on your decive, if nothing happend press the "reset button" on a back of your device.
After this operation you will have a CWM Recovery, but not a main firmware!!!
Install pemergency custom ROM
1. Unpack archive 07122012.rar
2. Copy whole folder clockworkmode to your external sdcard.
Boot in to CWM Recovery:
1. switch off dfevice
2. Hold Power Button for 3 sek, release and hold vol+ and - together untill you will boot in to recovery mod
In CWM Recovery:
1. Choose "backup and restore"
2. Choose "advanced restore"
3. Choose "modpemergency/"
4. Choose "Restore system"
5. Choose "Yes - Restore System"
After update choose
1. "wipe data/factory reset"
2. "wipe cache partition"
4. "advancedwipe dalvik"
5. reboot.
It will take a while to boot for a first time so no worries
After that sometimes it is nessesary to repair IMEI
IMEI repair
1. Connect your device to the PC (device must be turned on and connected as "USB debugging" and "Media device)
2. Start MTK Droid Tools
3. Press Replace IMEI (fill up IMEI 1 and IMEI 2) and save
4. Reboot device
Good Luck...

NEW ROM on the way. Will be posted on the end of this week.
- oryginal multilanguage for most of languages like in a stock european ROM (not more locale)
- fixed most bugs from the previous pemergency mod
- stock launcher
- Battery life incresed to 30% more then oryginal ROM
- Battery status in a settings
- Downloading all apps from google store (no incompatibility problem)
- Quick Boot
- Better sim management
- All options for synchronisation, like in oryginal european stock ROM
and many many more...
Finished in 98%
Anyone would like to pay for this £5?
Free update for everyone who bought the previous version!!!

ok, I certainly update :good:
may inform some user from the German forum.
pretty much at the end of the page
http://www.android-hilfe.de/lenovo-ideapad-a2-forum/341347-a2107a-root-cwm-custom-rom-5.html

[Q] Installing Custom Rom

I want to install a custom rom on my phone for the first time,,, I am a noob, so can any one guide me the exact process what i have to do to install a custom jelly bean rom.
My phone is currently on stock gingerbread 2.3.6
My phone is unrooted, so please guide me step by step, to root it and to install a custom rom.... I hope somebody helps me...

I think after some search you should have learnt :thumbup:
But i'll give an advise ,firstly search cf root file which is suitable one according to your baseband like xxkpq etc.
Sent from my GT-I9003 using xda app-developers app

best way to do it bug free is...
first get the odin software in pc , then download the stock xxkpe rom (google them to get) . Now download the cf-root for xxkpe rom (i9003) .
mostly you will get the procedure for installing and rooting on the same page from where u'll download the above mentioned files (its in very easy steps).. Now when you are successfully rooted , download the CM10 alpha 4 (jelly bean for i9003) from xda , also get the latest gapps file.
Now store these two zip files (DO NOT EXTRACT THEM) in your memory card (don't put them in folders) , now power off the phone & restart in recovery mode (vol up+ home+power) then go to wipe data/fact. reset and hit ok, also clear the db data in advance menu , once done go to 'install zip from sd card' then select the CM10 file & install ....after installing , again do wipe data then go to 'reboot in recovery' (this will reboot ur phone and take u back to recovery menu) . Now again install zip from sd card & this time select the gapps file. once done go to reboot device. Now ur phone will boot in CM 10 style (first boot takes much time so be patient) & DONE ......congo, you have now a galaxy i9003 with jelly bean ........and now you are free to try all cm10 based roms like x-gamerz, ehndroix , etc just flash them from recovery as directed by the developer of that specific rom......hope it helped..
Sent from my GT-I9003
HIT THANKS IF HELPED!!!

glydarzx said:
best way to do it bug free is...
first get the odin software in pc , then download the stock xxkpe rom (google them to get) . Now download the cf-root for xxkpe rom (i9003) .
mostly you will get the procedure for installing and rooting on the same page from where u'll download the above mentioned files (its in very easy steps).. Now when you are successfully rooted , download the CM10 alpha 4 (jelly bean for i9003) from xda , also get the latest gapps file.
Now store these two zip files (DO NOT EXTRACT THEM) in your memory card (don't put them in folders) , now power off the phone & restart in recovery mode (vol up+ home+power) then go to wipe data/fact. reset and hit ok, also clear the db data in advance menu , once done go to 'install zip from sd card' then select the CM10 file & install ....after installing , again do wipe data then go to 'reboot in recovery' (this will reboot ur phone and take u back to recovery menu) . Now again install zip from sd card & this time select the gapps file. once done go to reboot device. Now ur phone will boot in CM 10 style (first boot takes much time so be patient) & DONE ......congo, you have now a galaxy i9003 with jelly bean ........and now you are free to try all cm10 based roms like x-gamerz, ehndroix , etc just flash them from recovery as directed by the developer of that specific rom......hope it helped..
Sent from my GT-I9003
HIT THANKS IF HELPED!!!
Click to expand...
Click to collapse
Dude you forget ddlf2 step!!!!!
Correct steps: xxkpe/ddlf2/root ddlf2/flash cm10/enjoy...
Sent from my GT-I9003 using xda premium

No dude,this is also a possible way,as i did.
-xgamerz v3-

I followed these videos to root my i9003 and install Jelly Bean:

[Recovery]ClockworkMod Recovery For Micromax A100(Backup and Restore option working)

CWM Based Recovery For Micromax A100
Working :
Everything but not sure check and tell me.
Bugs:
unable to solve the layout break problem.
Flashing Instruction :
Method 1:
1.Install drivers for A100
2..Use Adb made easy by Savoca for flashing recovery.img
Method 2:
1.Download MMX A100 toolkit by aftablonely to flash the recovery
Links :
ADB made easy
MMX A100 Toolkit
Credits:
Savoca for his great ADB made easy.
aftab the only rom developer for our A100.
varun.chitre15 for his cwm recovery.

Reserved will. Come with review asap as I get to a comp
Edit;100% working . . .back up and restore. . .
Thanks
a person who didn't make mistake never tried new things. . ." - Albert Einstein

How can i remove cwm recovery.
Or revert back to stock recovery

Hi, I want to know whether following standard steps can be followed with this recovery when you want to flash new ROM
1) Go To CMW Recovery
2) Wipe Data/Factory Reset And Wipe Partition
3) From Advance Menu Do Dalvik Catch Clear
4) From Advance Menu Do Battery State Clear
5) Go in Mount And Storage select FORMAT SYSTEM
6) Select Install From SD and Select File And Click YES
However, Aftabloney's thread is showing only following steps.
Reboot into recovery by pressing vol up + power on simultaneously
** Select data/factory reset
** Now select Install zip from SDcard > Choose Zip from Sdcard > Killer_DroidV3.0 beta.zip
Is there any further advantage in terms of speed and smooth operation of device if we follow steps 1 to 6 as outlined above? Or while flashing Aftab's Killer droid ROM, I should follow his instructions only. By far now I have flashed killer droid ver 2 and later ver 3 ROMs by aftab's method and it is working. However pls tell me if there is any other advantage in following steps 1 to 6. Does the CWM recovery supports these steps?
Thanks in advance.

Database Info

welcome